From 53cc4efb23a3bea0a1ee478c85a9b6b86df5e171 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Torbj=C3=B8rn?= <tobby@dallnett.com>
Date: Thu, 18 Jan 2018 09:42:36 +0100
Subject: [PATCH] last minute tweaks

Decreased jerk and acceleration
---
 .../anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg   | 10 +++++-----
 .../anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg    | 10 +++++-----
 .../anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg  | 10 +++++-----
 3 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg
index 5c9a9c4769..355d9ee971 100644
--- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg
+++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg
@@ -11,8 +11,8 @@ setting_version = 4
 
 [values]
 acceleration_enabled = True
-acceleration_print = 2000
-acceleration_travel = 3500
+acceleration_print = 1800
+acceleration_travel = 3000
 adhesion_type = skirt
 brim_width = 4.0
 cool_fan_full_at_height = 0.5
@@ -23,11 +23,11 @@ infill_pattern = zigzag
 infill_sparse_density = 25
 initial_layer_line_width_factor = 140
 jerk_enabled = True
-jerk_print = 13
-jerk_travel = 13
+jerk_print = 8
+jerk_travel = 10
 layer_height = 0.3
 layer_height_0 = 0.3
-material_bed_temperature = 55
+material_bed_temperature = 60
 material_diameter = 1.75
 material_print_temperature = 205
 material_print_temperature_layer_0 = 0
diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg
index c4485c34aa..9965d9f763 100644
--- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg
+++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg
@@ -11,8 +11,8 @@ setting_version = 4
 
 [values]
 acceleration_enabled = True
-acceleration_print = 2000
-acceleration_travel = 3500
+acceleration_print = 1800
+acceleration_travel = 3000
 adhesion_type = skirt
 brim_width = 4.0
 cool_fan_full_at_height = 0.5
@@ -23,11 +23,11 @@ infill_pattern = zigzag
 infill_sparse_density = 25
 initial_layer_line_width_factor = 140
 jerk_enabled = True
-jerk_print = 13
-jerk_travel = 13
+jerk_print = 8
+jerk_travel = 10
 layer_height = 0.1
 layer_height_0 = 0.1
-material_bed_temperature = 55
+material_bed_temperature = 60
 material_diameter = 1.75
 material_print_temperature = 205
 material_print_temperature_layer_0 = 0
diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg
index 2cc6ee69a4..12773190dd 100644
--- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg
+++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg
@@ -11,8 +11,8 @@ setting_version = 4
 
 [values]
 acceleration_enabled = True
-acceleration_print = 2000
-acceleration_travel = 3500
+acceleration_print = 1800
+acceleration_travel = 3000
 adhesion_type = skirt
 brim_width = 4.0
 cool_fan_full_at_height = 0.5
@@ -23,11 +23,11 @@ infill_pattern = zigzag
 infill_sparse_density = 25
 initial_layer_line_width_factor = 140
 jerk_enabled = True
-jerk_print = 13
-jerk_travel = 13
+jerk_print = 8
+jerk_travel = 10
 layer_height = 0.2
 layer_height_0 = 0.2
-material_bed_temperature = 55
+material_bed_temperature = 60
 material_diameter = 1.75
 material_print_temperature = 205
 material_print_temperature_layer_0 = 0