diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
index 8d749e29ce..f99c3997f7 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg
@@ -10,12 +10,25 @@ material = generic_cpe_plus_ultimaker3_AA_0.4
 weight = -2
 
 [values]
+brim_width = 7
 cool_fan_speed_max = 80
+cool_min_speed = 5
+infill_wipe_dist = 0
 layer_height = 0.2
 machine_nozzle_cool_down_speed = 0.9
-speed_print = 50
+machine_nozzle_heat_up_speed = 1.4
+prime_tower_size = 17
+retraction_combing = off
+retraction_hop = 0.2
+retraction_hop_enabled = False
+retraction_min_travel = =5
+retraction_prime_speed = =15
 speed_topbottom = =math.ceil(speed_print * 65 / 50)
 speed_wall = =math.ceil(speed_print * 50 / 50)
 speed_wall_0 = =math.ceil(speed_wall * 40 / 50)
+support_z_distance = =layer_height
+switch_extruder_prime_speed = =15
+switch_extruder_retraction_amount = =8
+switch_extruder_retraction_speeds = 20
 wall_thickness = 1
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
index 2536420c1d..c03e072c8e 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg
@@ -10,12 +10,26 @@ material = generic_cpe_plus_ultimaker3_AA_0.4
 weight = -1
 
 [values]
+brim_width = 7
 cool_fan_speed_max = 80
 cool_min_speed = 6
+infill_wipe_dist = 0
 layer_height = 0.15
 machine_nozzle_cool_down_speed = 0.9
+machine_nozzle_heat_up_speed = 1.4
+prime_tower_size = 17
+retraction_combing = off
+retraction_hop = 0.2
+retraction_hop_enabled = False
+retraction_min_travel = =5
+retraction_prime_speed = =15
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 55 / 45)
 speed_wall = =math.ceil(speed_print * 45 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
+support_z_distance = =layer_height
+switch_extruder_prime_speed = =15
+switch_extruder_retraction_amount = =8
+switch_extruder_retraction_speeds = 20
+wall_thickness = 1.3
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
index 90c23b7d8f..c88fe1a56a 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg
@@ -10,6 +10,24 @@ material = generic_cpe_plus_ultimaker3_AA_0.4
 weight = 1
 
 [values]
-machine_nozzle_heat_up_speed = 1.5
+brim_width = 7
+cool_min_speed = 5
+infill_wipe_dist = 0
+layer_height = 0.06
 material_print_temperature = =default_material_print_temperature + 2
+prime_tower_size = 17
+retraction_combing = off
+retraction_hop = 0.2
+retraction_hop_enabled = False
+retraction_min_travel = =5
+retraction_prime_speed = =15
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 30 / 35)
+speed_wall = =math.ceil(speed_print * 35 / 40)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
+support_z_distance = =layer_height
+switch_extruder_prime_speed = =15
+switch_extruder_retraction_amount = =8
+switch_extruder_retraction_speeds = 20
+wall_thickness = 1.3
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
index f12d1ca613..9aaceb3a7a 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg
@@ -10,8 +10,23 @@ material = generic_cpe_plus_ultimaker3_AA_0.4
 weight = 0
 
 [values]
+brim_width = 7
 cool_min_speed = 7
-layer_height = 0.1
-machine_nozzle_heat_up_speed = 1.5
+infill_wipe_dist = 0
 material_print_temperature = =default_material_print_temperature + 5
+prime_tower_size = 17
+retraction_combing = off
+retraction_hop = 0.2
+retraction_hop_enabled = False
+retraction_min_travel = =5
+retraction_prime_speed = =15
+speed_print = 40
+speed_topbottom = =math.ceil(speed_print * 30 / 35)
+speed_wall = =math.ceil(speed_print * 35 / 40)
+speed_wall_0 = =math.ceil(speed_wall * 30 / 35)
+support_z_distance = =layer_height
+switch_extruder_prime_speed = =15
+switch_extruder_retraction_amount = =8
+switch_extruder_retraction_speeds = 20
+wall_thickness = 1.3
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
index 876941d82b..0cc074b7a0 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg
@@ -10,7 +10,24 @@ material = generic_pc_ultimaker3_AA_0.4
 weight = -2
 
 [values]
+adhesion_type = raft
+cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 90
+cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 6
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_overlap_mm = 0.05
 layer_height = 0.2
+material_print_temperature_layer_0 = =material_print_temperature + 5
+ooze_shield_angle = 40
+raft_airgap = 0.25
+raft_margin = 15
+retraction_count_max = 80
+skin_overlap = 30
+speed_layer_0 = 25
+support_interface_line_distance = 0.4
+support_interface_pattern = lines
+support_pattern = zigzag
+wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+xy_offset = -0.15
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
index 93babeba51..c887fb283d 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg
@@ -10,8 +10,25 @@ material = generic_pc_ultimaker3_AA_0.4
 weight = -1
 
 [values]
+adhesion_type = raft
+cool_fan_full_at_height = =layer_height_0 + layer_height
 cool_fan_speed_max = 85
+cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 7
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
 infill_overlap = =0
+infill_overlap_mm = 0.05
 layer_height = 0.15
+material_print_temperature_layer_0 = =material_print_temperature + 5
+ooze_shield_angle = 40
+raft_airgap = 0.25
+raft_margin = 15
+retraction_count_max = 80
+skin_overlap = 30
+speed_layer_0 = 25
+support_interface_line_distance = 0.4
+support_interface_pattern = lines
+support_pattern = zigzag
+wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+xy_offset = -0.15
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
index 03f7b2ffd9..6555c13f74 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg
@@ -10,6 +10,24 @@ material = generic_pc_ultimaker3_AA_0.4
 weight = 1
 
 [values]
+adhesion_type = raft
+cool_fan_full_at_height = =layer_height_0 + layer_height
+cool_min_layer_time_fan_speed_max = 5
 cool_min_speed = 8
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_overlap_mm = 0.05
+layer_height = 0.06
 material_print_temperature = =default_material_print_temperature - 10
+material_print_temperature_layer_0 = =material_print_temperature + 5
+ooze_shield_angle = 40
+raft_airgap = 0.25
+raft_margin = 15
+retraction_count_max = 80
+skin_overlap = 30
+speed_layer_0 = 25
+support_interface_line_distance = 0.4
+support_interface_pattern = lines
+support_pattern = zigzag
+wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+xy_offset = -0.15
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
index 7fb9c74ca0..eeea96cd18 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg
@@ -10,6 +10,23 @@ material = generic_pc_ultimaker3_AA_0.4
 weight = 0
 
 [values]
-layer_height = 0.1
+adhesion_type = raft
+cool_fan_full_at_height = =layer_height_0 + layer_height
+cool_min_layer_time_fan_speed_max = 5
+cool_min_speed = 5
+infill_line_width = =round(line_width * 0.4 / 0.35, 2)
+infill_overlap_mm = 0.05
 material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =material_print_temperature + 5
+ooze_shield_angle = 40
+raft_airgap = 0.25
+raft_margin = 15
+retraction_count_max = 80
+skin_overlap = 30
+speed_layer_0 = 25
+support_interface_line_distance = 0.4
+support_interface_pattern = lines
+support_pattern = zigzag
+wall_line_width_x = =round(line_width * 0.4 / 0.35, 2)
+xy_offset = -0.15
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
index 72bb42c7bd..bcdd8044b8 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -10,5 +10,31 @@ material = generic_tpu_ultimaker3_AA_0.4
 weight = -2
 
 [values]
+brim_width = 8.75
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+gradual_infill_step_height = =5 * layer_height
+gradual_infill_steps = 4
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_pattern = tetrahedral
+infill_sparse_density = 96
 layer_height = 0.2
+line_width = =machine_nozzle_size * 0.95
+material_flow = 106
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+skin_overlap = 15
+speed_equalize_flow_enabled = True
+speed_layer_0 = 18
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 300
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+support_bottom_distance = =support_z_distance / 2
+top_bottom_thickness = 0.7
+wall_line_width_x = =line_width
+wall_thickness = 0.76
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
index 6e0bbc362d..567d9273b5 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -10,6 +10,32 @@ material = generic_tpu_ultimaker3_AA_0.4
 weight = -1
 
 [values]
+brim_width = 8.75
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+gradual_infill_step_height = =5 * layer_height
+gradual_infill_steps = 4
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_pattern = tetrahedral
+infill_sparse_density = 96
 layer_height = 0.15
+line_width = =machine_nozzle_size * 0.95
+material_flow = 106
+material_print_temperature_layer_0 = =default_material_print_temperature + 2
 retraction_amount = 7
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+skin_overlap = 15
+speed_equalize_flow_enabled = True
+speed_layer_0 = 18
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 300
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+support_bottom_distance = =support_z_distance / 2
+top_bottom_thickness = 0.7
+wall_line_width_x = =line_width
+wall_thickness = 0.76
 
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
index 66f6e91ec9..75d76a32f2 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -10,7 +10,32 @@ material = generic_tpu_ultimaker3_AA_0.4
 weight = 0
 
 [values]
+brim_width = 8.75
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 6
+gradual_infill_step_height = =5 * layer_height
+gradual_infill_steps = 4
+infill_line_width = =round(line_width * 0.38 / 0.38, 2)
+infill_pattern = tetrahedral
+infill_sparse_density = 96
+line_width = =machine_nozzle_size * 0.95
+material_flow = 106
 material_initial_print_temperature = =material_print_temperature - 10
 material_print_temperature = =default_material_print_temperature
 material_print_temperature_layer_0 = =default_material_print_temperature
+retraction_count_max = 12
+retraction_extra_prime_amount = 0.8
+skin_overlap = 15
+speed_equalize_flow_enabled = True
+speed_layer_0 = 18
+speed_print = 25
+speed_topbottom = =math.ceil(speed_print * 25 / 25)
+speed_travel = 300
+speed_wall = =math.ceil(speed_print * 25 / 25)
+speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
+support_angle = 50
+support_bottom_distance = =support_z_distance / 2
+top_bottom_thickness = 0.7
+wall_line_width_x = =line_width
+wall_thickness = 0.76