mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-09 23:05:01 -06:00
Merge branch 'master' into feature_multiextruder_machinesettings
This commit is contained in:
fieldOfView
commit
4d12ab1296
157 changed files with 24335 additions and 2374 deletions
|
|
@ -9,12 +9,18 @@
|
|||
"manufacturer": "Cartesio bv",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"has_machine_materials": true,
|
||||
"has_variant_materials": true,
|
||||
"has_variants": true,
|
||||
|
||||
"variants_name": "Nozzle size",
|
||||
"preferred_variant": "*0.4*",
|
||||
"preferred_material": "*pla*",
|
||||
"preferred_quality": "*draft*",
|
||||
"preferred_quality": "*normal*",
|
||||
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "cartesio_extruder_0",
|
||||
|
|
@ -37,14 +43,22 @@
|
|||
"machine_depth": { "default_value": 270 },
|
||||
"machine_width": { "default_value": 430 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"material_print_temp_wait": { "default_value": false },
|
||||
"material_bed_temp_wait": { "default_value": false },
|
||||
"infill_pattern": { "default_value": "grid"},
|
||||
"prime_tower_enable": { "default_value": true },
|
||||
"prime_tower_wall_thickness": { "resolve": 0.7 },
|
||||
"prime_tower_position_x": { "default_value": 50 },
|
||||
"prime_tower_position_y": { "default_value": 71 },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "M92 E159\nG21\nG90\nM42 S255 P13;chamber lights\nM42 S255 P12;fume extraction\nM140 S{material_bed_temperature}\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature}\nM104 S120 T1\nM109 S{material_print_temperature} T0\nM104 S21 T1\n\nM117 purging nozzle....\n\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-{retraction_amount} F600\nG92 E0\n\nM117 wiping nozzle....\n\nG1 X1 Y24 F3000\nG1 X70 F9000\n\nM117 Printing .....\n\nG1 E1 F100\nG92 E-1\n"
|
||||
"default_value": "\nM104 S120 T1\nM104 S120 T2\nM104 S120 T3\n\nM92 E159\n\nG21\nG90\nM42 S255 P13;chamber lights\nM42 S255 P12;fume extraction\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature_layer_0}\n\nM117 Heating for 50 sec.\nG4 S20\nM117 Heating for 30 sec.\nG4 S20\nM117 Heating for 10 sec.\nM300 S600 P1000\nG4 S9\n\nM117 purging nozzle....\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-1 F600\n\nM117 wiping nozzle....\nG1 X1 Y24 F3000\nG1 X70 F9000\n\nM104 S21 T1\nM104 S21 T2\nM104 S21 T3\n\nM117 Printing .....\n"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "; -- END GCODE --\nM106 S255\nM140 S5\nM104 S5 T0\nM104 S5 T1\nG1 X20.0 Y260.0 F6000\nG4 S7\nM84\nG4 S90\nM107\nM42 P12 S0\nM42 P13 S0\nM84\n; -- end of END GCODE --"
|
||||
"default_value": "; -- END GCODE --\nM106 S255\nM140 S5\nM104 S5 T0\nM104 S5 T1\nM104 S5 T2\nM104 S5 T3\nG1 X20.0 Y260.0 F6000\nG4 S7\nM84\nG4 S90\nM107\nM42 P12 S0\nM42 P13 S0\nM84\nT0\n; -- end of GCODE --"
|
||||
},
|
||||
"layer_height": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" },
|
||||
"layer_height_0": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" },
|
||||
"layer_height_0": { "resolve": "0.2 if min(extruderValues('machine_nozzle_size')) < 0.3 else 0.3 "},
|
||||
"machine_nozzle_heat_up_speed": {"default_value": 20},
|
||||
"machine_nozzle_cool_down_speed": {"default_value": 20},
|
||||
"machine_min_cool_heat_time_window": {"default_value": 5}
|
||||
|
|
|
|||
|
|
@ -845,7 +845,7 @@
|
|||
"unit": "mm",
|
||||
"default_value": 0.8,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
||||
"minimum_value_warning": "0.2 + resolveOrValue('layer_height')",
|
||||
"maximum_value": "machine_height",
|
||||
"type": "float",
|
||||
"value": "top_bottom_thickness",
|
||||
|
|
@ -860,7 +860,7 @@
|
|||
"minimum_value": "0",
|
||||
"maximum_value_warning": "100",
|
||||
"type": "int",
|
||||
"minimum_value_warning": "4",
|
||||
"minimum_value_warning": "2",
|
||||
"value": "0 if infill_sparse_density == 100 else math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))",
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
|
|
@ -873,7 +873,7 @@
|
|||
"unit": "mm",
|
||||
"default_value": 0.6,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
||||
"minimum_value_warning": "0.2 + resolveOrValue('layer_height')",
|
||||
"type": "float",
|
||||
"value": "top_bottom_thickness",
|
||||
"maximum_value": "machine_height",
|
||||
|
|
@ -885,7 +885,7 @@
|
|||
"label": "Bottom Layers",
|
||||
"description": "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number.",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "4",
|
||||
"minimum_value_warning": "2",
|
||||
"default_value": 6,
|
||||
"type": "int",
|
||||
"value": "999999 if infill_sparse_density == 100 else math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))",
|
||||
|
|
@ -1301,7 +1301,7 @@
|
|||
"type": "int",
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "4",
|
||||
"maximum_value": "(20 - math.log(infill_line_distance) / math.log(2)) if infill_line_distance > 0 and not spaghetti_infill_enabled else 0",
|
||||
"maximum_value": "0 if spaghetti_infill_enabled else (999999 if infill_line_distance == 0 else (20 - math.log(infill_line_distance) / math.log(2)))",
|
||||
"enabled": "infill_sparse_density > 0 and infill_pattern != 'cubicsubdiv' and not spaghetti_infill_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
|
|
@ -2332,7 +2332,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
|
|
@ -2346,7 +2345,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
|
|
@ -2360,7 +2358,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
|
|
@ -2375,7 +2372,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_wall",
|
||||
|
|
@ -2389,7 +2385,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_wall",
|
||||
|
|
@ -2405,7 +2400,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
|
|
@ -2419,7 +2413,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
|
|
@ -2438,7 +2431,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_support",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled') and support_enable",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
|
|
@ -2454,7 +2446,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_support",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled') and extruderValue(support_interface_extruder_nr, 'support_interface_enable') and support_enable",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
|
|
@ -2470,7 +2461,6 @@
|
|||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
|
|
@ -2487,7 +2477,6 @@
|
|||
"type": "float",
|
||||
"default_value": 30,
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"value": "jerk_print if magic_spiralize else 30",
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
|
|
@ -2502,7 +2491,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_print",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
"settable_per_mesh": true,
|
||||
|
|
@ -2517,7 +2505,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_layer_0",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
"settable_per_mesh": true
|
||||
|
|
@ -2531,7 +2518,6 @@
|
|||
"default_value": 20,
|
||||
"value": "jerk_layer_0 * jerk_travel / jerk_print",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -2547,7 +2533,6 @@
|
|||
"type": "float",
|
||||
"default_value": 20,
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "5",
|
||||
"maximum_value_warning": "50",
|
||||
"value": "jerk_layer_0",
|
||||
"enabled": "resolveOrValue('jerk_enabled')",
|
||||
|
|
@ -2851,8 +2836,8 @@
|
|||
{
|
||||
"support_enable":
|
||||
{
|
||||
"label": "Enable Support",
|
||||
"description": "Enable support structures. These structures support parts of the model with severe overhangs.",
|
||||
"label": "Generate Support",
|
||||
"description": "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"settable_per_mesh": true,
|
||||
|
|
@ -3139,7 +3124,7 @@
|
|||
"type": "float",
|
||||
"default_value": 1,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
||||
"minimum_value_warning": "0.2 + resolveOrValue('layer_height')",
|
||||
"maximum_value_warning": "10",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
"enabled": "extruderValue(support_interface_extruder_nr, 'support_interface_enable') and support_enable",
|
||||
|
|
@ -3154,7 +3139,7 @@
|
|||
"type": "float",
|
||||
"default_value": 1,
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
||||
"minimum_value_warning": "0.2 + resolveOrValue('layer_height')",
|
||||
"maximum_value_warning": "10",
|
||||
"value": "extruderValue(support_interface_extruder_nr, 'support_interface_height')",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
|
|
@ -3170,7 +3155,7 @@
|
|||
"default_value": 1,
|
||||
"value": "extruderValue(support_interface_extruder_nr, 'support_interface_height')",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "min(3 * resolveOrValue('layer_height'), extruderValue(support_interface_extruder_nr, 'support_bottom_stair_step_height'))",
|
||||
"minimum_value_warning": "min(0.2 + resolveOrValue('layer_height'), extruderValue(support_interface_extruder_nr, 'support_bottom_stair_step_height'))",
|
||||
"maximum_value_warning": "10",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
"enabled": "extruderValue(support_interface_extruder_nr, 'support_interface_enable') and support_enable",
|
||||
|
|
@ -3555,7 +3540,7 @@
|
|||
"value": "resolveOrValue('layer_height') * 1.5",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "0.04",
|
||||
"maximum_value_warning": "0.75 * extruderValue(adhesion_extruder_nr, 'raft_interface_line_width')",
|
||||
"maximum_value_warning": "0.75 * extruderValue(adhesion_extruder_nr, 'machine_nozzle_size')",
|
||||
"enabled": "resolveOrValue('adhesion_type') == 'raft'",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -3957,7 +3942,7 @@
|
|||
"value": "round(max(2 * min(extruderValues('prime_tower_line_width')), 0.5 * (resolveOrValue('prime_tower_size') - math.sqrt(max(0, resolveOrValue('prime_tower_size') ** 2 - max(extruderValues('prime_tower_min_volume')) / resolveOrValue('layer_height'))))), 3)",
|
||||
"resolve": "max(extruderValues('prime_tower_wall_thickness'))",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "2 * min(extruderValues('prime_tower_line_width'))",
|
||||
"minimum_value_warning": "2 * min(extruderValues('prime_tower_line_width')) - 0.0001",
|
||||
"maximum_value_warning": "resolveOrValue('prime_tower_size') / 2",
|
||||
"enabled": "resolveOrValue('prime_tower_enable')",
|
||||
"settable_per_mesh": false,
|
||||
|
|
@ -4240,6 +4225,18 @@
|
|||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"support_mesh_drop_down":
|
||||
{
|
||||
"label": "Drop Down Support Mesh",
|
||||
"description": "Make support everywhere below the support mesh, so that there's no overhang in the support mesh.",
|
||||
"type": "bool",
|
||||
"default_value": true,
|
||||
"enabled": "support_mesh",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"anti_overhang_mesh":
|
||||
{
|
||||
"label": "Anti Overhang Mesh",
|
||||
|
|
@ -4271,7 +4268,8 @@
|
|||
"description": "Spiralize smooths out the Z move of the outer edge. This will create a steady Z increase over the whole print. This feature turns a solid model into a single walled print with a solid bottom. This feature used to be called Joris in older versions.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"settable_per_mesh": true
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
}
|
||||
}
|
||||
},
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@
|
|||
"machine_center_is_zero": { "default_value": false },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; M92 E140 ;optionally adjust steps per mm for your filament\n\n; Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n; sliced for : {machine_name}\n; nozzle diameter : {machine_nozzle_size}\n; filament diameter : {material_diameter}\n; layer height : {layer_height}\n; 1st layer height : {layer_height_0}\n; line width : {line_width}\n; outer wall wipe dist. : {wall_0_wipe_dist}\n; infill line width : {infill_line_width}\n; wall thickness : {wall_thickness}\n; top thickness : {top_thickness}\n; bottom thickness : {bottom_thickness}\n; infill density : {infill_sparse_density}\n; infill pattern : {infill_pattern}\n; print temperature : {material_print_temperature}\n; 1st layer print temp. : {material_print_temperature_layer_0}\n; heated bed temperature : {material_bed_temperature}\n; 1st layer bed temp. : {material_bed_temperature_layer_0}\n; regular fan speed : {cool_fan_speed_min}\n; max fan speed : {cool_fan_speed_max}\n; retraction amount : {retraction_amount}\n; retr. retract speed : {retraction_retract_speed}\n; retr. prime speed : {retraction_prime_speed}\n; build plate adhesion : {adhesion_type}\n; support ? {support_enable}\n; spiralized ? {magic_spiralize}\n\nM117 Preparing ;write Preparing\nM140 S{material_bed_temperature_layer_0} ;set bed temperature and move on\nM104 S{material_print_temperature_layer_0} ;set extruder temperature and move on\nM206 X10.0 Y0.0 ;set x homing offset for default bed leveling\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nM82 ;set extruder to absolute mode\nG28 ;home all axes\nM203 Z4 ;slow Z speed down for greater accuracy when probing\nG29 ;auto bed leveling procedure\nM203 Z7 ;pick up z speed again for printing\nM190 S{material_bed_temperature_layer_0} ;wait for the bed to reach desired temperature\nM109 S{material_print_temperature_layer_0} ;wait for the extruder to reach desired temperature\nG92 E0 ;reset the extruder position\nG1 F1500 E15 ;extrude 15mm of feed stock\nG92 E0 ;reset the extruder position again\nM117 Print starting ;write Print starting\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n"
|
||||
"default_value": ";---------------------------------------\n; ; ; Jellybox Start Script Begin ; ; ;\n;_______________________________________\n; M92 E140 ;optionally adjust steps per mm for your filament\n\n; Print Settings Summary\n; (leave these alone: this is only a list of the slicing settings)\n; (overwriting these values will NOT change your printer's behavior)\n; sliced for : {machine_name}\n; nozzle diameter : {machine_nozzle_size}\n; filament diameter : {material_diameter}\n; layer height : {layer_height}\n; 1st layer height : {layer_height_0}\n; line width : {line_width}\n; outer wall wipe dist. : {wall_0_wipe_dist}\n; infill line width : {infill_line_width}\n; wall thickness : {wall_thickness}\n; top thickness : {top_thickness}\n; bottom thickness : {bottom_thickness}\n; infill density : {infill_sparse_density}\n; infill pattern : {infill_pattern}\n; print temperature : {material_print_temperature}\n; 1st layer print temp. : {material_print_temperature_layer_0}\n; heated bed temperature : {material_bed_temperature}\n; 1st layer bed temp. : {material_bed_temperature_layer_0}\n; regular fan speed : {cool_fan_speed_min}\n; max fan speed : {cool_fan_speed_max}\n; retraction amount : {retraction_amount}\n; retr. retract speed : {retraction_retract_speed}\n; retr. prime speed : {retraction_prime_speed}\n; build plate adhesion : {adhesion_type}\n; support ? {support_enable}\n; spiralized ? {magic_spiralize}\n\nM117 Preparing ;write Preparing\nM140 S{material_bed_temperature_layer_0} ;set bed temperature and move on\nM109 S{material_print_temperature} ; wait for the extruder to reach desired temperature\nM206 X10.0 Y0.0 ;set x homing offset for default bed leveling\nG21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nM82 ;set extruder to absolute mode\nG28 ;home all axes\nM203 Z4 ;slow Z speed down for greater accuracy when probing\nG29 ;auto bed leveling procedure\nM203 Z7 ;pick up z speed again for printing\nM190 S{material_bed_temperature_layer_0} ;wait for the bed to reach desired temperature\nM109 S{material_print_temperature_layer_0} ;wait for the extruder to reach desired temperature\nG92 E0 ;reset the extruder position\nG1 F1500 E15 ;extrude 15mm of feed stock\nG92 E0 ;reset the extruder position again\nM117 Print starting ;write Print starting\n;---------------------------------------------\n; ; ; Jellybox Printer Start Script End ; ; ;\n;_____________________________________________\n"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "\n;---------------------------------\n;;; Jellybox End Script Begin ;;;\n;_________________________________\nM117 Finishing Up ;write Finishing Up\n\nM104 S0 ;extruder heater off\nM140 S0 ;bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG28 X ;home x, so the head is out of the way\nG1 Y100 ;move Y forward, so the print is more accessible\nM84 ;steppers off\n\nM117 Print finished ;write Print finished\n;---------------------------------------\n;;; Jellybox End Script End ;;;\n;_______________________________________"
|
||||
|
|
|
|||
70
resources/definitions/makeR_pegasus.def.json
Normal file
70
resources/definitions/makeR_pegasus.def.json
Normal file
|
|
@ -0,0 +1,70 @@
|
|||
{
|
||||
"id": "makeR_pegasus",
|
||||
"version": 2,
|
||||
"name": "makeR Pegasus",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "makeR",
|
||||
"manufacturer": "makeR",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2",
|
||||
"platform": "makeR_pegasus_platform.stl",
|
||||
"platform_offset": [-200,-10,200]
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": " makeR Pegasus" },
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 400
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 400
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 400
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 2.85
|
||||
},
|
||||
"machine_nozzle_heat_up_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_nozzle_cool_down_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"default_value": [
|
||||
[-75, -18],
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18]
|
||||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": -25
|
||||
},
|
||||
"machine_platform_offset":{
|
||||
"default_value":-25
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G1 Z15;\nG28;Home\nG29;Auto Level\nG1 Z5 F5000;Move the platform down 15mm"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0;Turn off temperature\nG28 X0; Home X\nM84; Disable Motors"
|
||||
}
|
||||
}
|
||||
}
|
||||
67
resources/definitions/makeR_prusa_tairona_i3.def.json
Normal file
67
resources/definitions/makeR_prusa_tairona_i3.def.json
Normal file
|
|
@ -0,0 +1,67 @@
|
|||
{
|
||||
"id": "makeR_prusa_tairona_i3",
|
||||
"version": 2,
|
||||
"name": "makeR Prusa Tairona i3",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "makeR",
|
||||
"manufacturer": "makeR",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2",
|
||||
"platform": "makeR_prusa_tairona_i3_platform.stl",
|
||||
"platform_offset": [-2,0,0]
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "makeR Prusa Tairona I3" },
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"machine_nozzle_heat_up_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_nozzle_cool_down_speed": {
|
||||
"default_value": 2
|
||||
},
|
||||
"machine_head_polygon": {
|
||||
"default_value": [
|
||||
[-75, -18],
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18]
|
||||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": 55
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G1 Z15;\nG28;Home\nG29;Auto Level\nG1 Z5 F5000;Move the platform down 15mm"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0;Turn off temperature\nG28 X0; Home X\nM84; Disable Motors"
|
||||
}
|
||||
}
|
||||
}
|
||||
162
resources/definitions/peopoly_moai.def.json
Normal file
162
resources/definitions/peopoly_moai.def.json
Normal file
|
|
@ -0,0 +1,162 @@
|
|||
{
|
||||
"id": "peopoly_moai",
|
||||
"version": 2,
|
||||
"name": "Peopoly Moai",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "fieldOfView",
|
||||
"manufacturer": "Peopoly",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_machine_quality": true,
|
||||
"has_materials": false
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": {
|
||||
"default_value": "Moai"
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 130
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 180
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 130
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.067
|
||||
},
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[ -20, 10 ],
|
||||
[ -20, -10 ],
|
||||
[ 10, 10 ],
|
||||
[ 10, -10 ]
|
||||
]
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28 ;Home"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0\nM140 S0\nG28 X0 Y0\nM84"
|
||||
},
|
||||
|
||||
"line_width": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"wall_line_width": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"wall_line_width_x": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"skin_line_width": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"infill_line_width": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"skirt_brim_line_width": {
|
||||
"minimum_value_warning": "machine_nozzle_size"
|
||||
},
|
||||
"layer_height": {
|
||||
"maximum_value_warning": "0.5",
|
||||
"minimum_value_warning": "0.02"
|
||||
},
|
||||
"layer_height_0": {
|
||||
"maximum_value_warning": "0.5",
|
||||
"minimum_value_warning": "0.02",
|
||||
"value": "0.1"
|
||||
},
|
||||
"top_bottom_thickness": {
|
||||
"minimum_value_warning": "0.1"
|
||||
},
|
||||
"infill_sparse_thickness": {
|
||||
"maximum_value_warning": "0.5"
|
||||
},
|
||||
"speed_print": {
|
||||
"maximum_value_warning": "300"
|
||||
},
|
||||
"speed_infill": {
|
||||
"maximum_value_warning": "300"
|
||||
},
|
||||
"speed_wall": {
|
||||
"maximum_value_warning": "300",
|
||||
"value": "speed_print"
|
||||
},
|
||||
"speed_wall_0": {
|
||||
"maximum_value_warning": "300"
|
||||
},
|
||||
"speed_wall_x": {
|
||||
"maximum_value_warning": "300",
|
||||
"value": "speed_print"
|
||||
},
|
||||
"speed_topbottom": {
|
||||
"maximum_value_warning": "300",
|
||||
"value": "speed_print"
|
||||
},
|
||||
"speed_travel": {
|
||||
"value": "300"
|
||||
},
|
||||
"speed_travel_layer_0": {
|
||||
"value": "300"
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"value": "5"
|
||||
},
|
||||
"speed_slowdown_layers": {
|
||||
"value": "2"
|
||||
},
|
||||
|
||||
"acceleration_enabled": {
|
||||
"value": "False"
|
||||
},
|
||||
"print_sequence": {
|
||||
"enabled": false
|
||||
},
|
||||
"support_enable": {
|
||||
"enabled": false
|
||||
},
|
||||
"machine_nozzle_temp_enabled": {
|
||||
"value": "False"
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"enabled": false
|
||||
},
|
||||
"material_diameter": {
|
||||
"enabled": false,
|
||||
"value": "1.75"
|
||||
},
|
||||
"cool_fan_enabled": {
|
||||
"enabled": false,
|
||||
"value": "False"
|
||||
},
|
||||
"retraction_enable": {
|
||||
"enabled": false,
|
||||
"value": "False"
|
||||
},
|
||||
"retraction_combing": {
|
||||
"enabled": false,
|
||||
"value": "'off'"
|
||||
},
|
||||
"retract_at_layer_change": {
|
||||
"enabled": false
|
||||
},
|
||||
"cool_min_layer_time_fan_speed_max": {
|
||||
"enabled": false
|
||||
},
|
||||
"cool_fan_full_at_height": {
|
||||
"enabled": false
|
||||
},
|
||||
"cool_fan_full_layer": {
|
||||
"enabled": false
|
||||
}
|
||||
}
|
||||
}
|
||||
130
resources/definitions/rigid3d_zero2.def.json
Normal file
130
resources/definitions/rigid3d_zero2.def.json
Normal file
|
|
@ -0,0 +1,130 @@
|
|||
{
|
||||
"id": "rigid3d_zero2",
|
||||
"name": "Rigid3D Zero2",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Rigid3D",
|
||||
"manufacturer": "Rigid3D",
|
||||
"category": "Other",
|
||||
"has_materials": false,
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "rigid3d_zero2_platform.stl",
|
||||
"platform_offset": [ 5, 0, -35]
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Rigid3D Zero2" },
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [[ 30, 30], [ 30, 70], [ 30, 70], [ 30, 30]]
|
||||
},
|
||||
"z_seam_type": {
|
||||
"default_value": "random"
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"layer_height": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"wall_thickness": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"top_bottom_thickness": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"xy_offset": {
|
||||
"default_value": -0.2
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"value": 235
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"default_value": 100
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"speed_print": {
|
||||
"default_value": 40
|
||||
},
|
||||
"speed_layer_0": {
|
||||
"value": 15
|
||||
},
|
||||
"speed_tarvel": {
|
||||
"value": 100
|
||||
},
|
||||
"support_enable": {
|
||||
"default_value": false
|
||||
},
|
||||
"infill_sparse_density": {
|
||||
"default_value": 15
|
||||
},
|
||||
"infill_pattern": {
|
||||
"default_value": "lines",
|
||||
"value": "lines"
|
||||
},
|
||||
"retraction_amount": {
|
||||
"default_value": 1
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": 25
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap"
|
||||
},
|
||||
"cool_fan_enabled": {
|
||||
"default_value": false
|
||||
},
|
||||
"cool_fan_speed": {
|
||||
"default_value": 50,
|
||||
"value": 50
|
||||
},
|
||||
"cool_fan_speed_min": {
|
||||
"default_value": 0
|
||||
},
|
||||
"cool_fan_full_at_height": {
|
||||
"default_value": 1.0,
|
||||
"value": 1.0
|
||||
},
|
||||
"support_z_distance": {
|
||||
"default_value": 0.2
|
||||
},
|
||||
"support_interface_enable": {
|
||||
"default_value": true
|
||||
},
|
||||
"support_interface_height": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"support_interface_density": {
|
||||
"default_value": 70
|
||||
},
|
||||
"support_interface_pattern": {
|
||||
"default_value": "grid"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G21\nG28 ; Home extruder\nM107 ; Turn off fan\nG91 ; Relative positioning\nG1 Z5 F180;\nG1 X100 Y100 F3000;\nG1 Z-5 F180;\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG92 E0 ; Reset extruder position\n"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "G1 X0 Y180 ; Get extruder out of way.\nM107 ; Turn off fan\nG91 ; Relative positioning\nG0 Z20 ; Lift extruder up\nT0\nG1 E-1 ; Reduce filament pressure\nM104 T0 S0 ; Turn extruder heater off\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off\n"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -70,7 +70,7 @@
|
|||
"machine_start_gcode": { "default_value": "" },
|
||||
"machine_end_gcode": { "default_value": "" },
|
||||
"prime_tower_position_x": { "default_value": 175 },
|
||||
"prime_tower_position_y": { "default_value": 179 },
|
||||
"prime_tower_position_y": { "default_value": 178 },
|
||||
"prime_tower_wipe_enabled": { "default_value": false },
|
||||
|
||||
"acceleration_enabled": { "value": "True" },
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue