Merge pull request #3156 from gordo3di/gmax-configurations-cura-3.1

gMax 1.5+ Configurations

resources/definitions/gmax15plus.def.json

@@ -0,0 +1,53 @@
+{
+    "id": "gmax15plus",
+    "version": 2,
+    "name": "gMax 1.5 Plus",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "gcreate",
+        "manufacturer": "gcreate",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform": "gmax_1-5_xt-plus_s3d_full model_150707.stl",
+        "has_variants": true,
+		"variants_name": "Hotend",
+		"preferred_variant": "*0.5mm E3D (Default)*"
+		
+
+    },
+
+    "overrides": {
+	    "machine_extruder_count": { "default_value": 1 },
+        "machine_name": { "default_value": "gMax 1.5 Plus" },
+        "machine_heated_bed": { "default_value": false },
+        "machine_width": { "default_value": 406 },
+        "machine_depth": { "default_value": 406 },
+        "machine_height": { "default_value": 533 },
+        "machine_center_is_zero": { "default_value": false },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_size": { "default_value": 0.5 },
+        "layer_height": { "default_value": 0.2 },
+        "layer_height_0": { "default_value": 0.3 },
+        "retraction_amount": { "default_value": 1 },
+        "retraction_speed": { "default_value": 70},
+        "adhesion_type": { "default_value": "skirt" },
+        "gantry_height": { "default_value": 50 },
+        "speed_print": { "default_value": 50 },
+        "speed_travel": { "default_value": 70 },
+        "machine_max_acceleration_x": { "default_value": 600 },
+        "machine_max_acceleration_y": { "default_value": 600 },
+        "machine_max_acceleration_z": { "default_value": 30 },
+        "machine_max_acceleration_e": { "default_value": 10000 },
+        "machine_max_jerk_xy": { "default_value": 8 },
+        "machine_max_jerk_z": { "default_value": 0.4 },
+        "machine_max_jerk_e": { "default_value": 5.0 },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+       "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 ;Home X/Y/Z\nG29 ; Bed level\nM104 S{material_print_temperature} ; Preheat\nM109 S{material_print_temperature} ; Preheat\nG91 ;relative positioning\nG90 ;absolute positioning\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
+        "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
+		"material_print_temperature": { "default_value": 202 },
+		"wall_thickness": { "default_value": 1 },
+        "top_bottom_thickness": { "default_value": 1 },
+        "bottom_thickness": { "default_value": 1 }
+    }
+}

resources/definitions/gmax15plus_dual.def.json

@@ -0,0 +1,55 @@
+{
+    "id": "gmax15plus_dual",
+    "version": 2,
+    "name": "gMax 1.5 Plus Dual Extruder",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "GTL_180109",
+        "manufacturer": "gCreate",
+        "category": "Other",
+        "file_formats": "text/x-gcode",
+        "platform": "gmax_1-5_xt-plus_s3d_full model_150707.stl",
+		"has_variants": true,
+		"variants_name": "Hotend",
+		"preferred_variant": "*0.5mm E3D (Default)*",
+		"machine_extruder_trains": {
+			"0": "gmax15plus_dual_extruder_0",
+			"1": "gmax15plus_dual_extruder_1"
+			}
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "gMax 1.5 Plus Dual Extruder" },
+		"machine_extruder_count": { "default_value": 2 },
+        "machine_heated_bed": { "default_value": false },
+        "machine_width": { "default_value": 406 },
+        "machine_depth": { "default_value": 406 },
+        "machine_height": { "default_value": 533 },
+        "machine_center_is_zero": { "default_value": false },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_size": { "default_value": 0.5 },
+        "layer_height": { "default_value": 0.2 },
+        "layer_height_0": { "default_value": 0.3 },
+        "retraction_amount": { "default_value": 1 },
+        "retraction_speed": { "default_value": 70},
+        "adhesion_type": { "default_value": "skirt" },
+        "gantry_height": { "default_value": 50 },
+        "speed_print": { "default_value": 50 },
+        "speed_travel": { "default_value": 70 },
+        "machine_max_acceleration_x": { "default_value": 600 },
+        "machine_max_acceleration_y": { "default_value": 600 },
+        "machine_max_acceleration_z": { "default_value": 30 },
+        "machine_max_acceleration_e": { "default_value": 10000 },
+        "machine_max_jerk_xy": { "default_value": 8 },
+        "machine_max_jerk_z": { "default_value": 0.4 },
+        "machine_max_jerk_e": { "default_value": 5.0 },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+        "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 ;Home X/Y/Z\nG29 ; Bed level\nM104 S{material_print_temperature} T0 ; Preheat Left Extruder\nM104 S{material_print_temperature} T1 ; Preheat Right Extruder\nM109 S{material_print_temperature} T0 ; Preheat Left Extruder\nM109 S{material_print_temperature} T1 ; Preheat Right Extruder\nG91 ;relative positioning\nG90 ;absolute positioning\nM218 T1 X34.3 Y0; Set 2nd extruder offset. This can be changed later if needed\nG1 Z25.0 F9000 ;raise nozzle 25mm\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
+        "machine_end_gcode": { "default_value": "M104 S0 T0;Left extruder off\nM104 S0 T1; Right extruder off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
+		"material_print_temperature": { "default_value": 202 },
+		"wall_thickness": { "default_value": 1 },
+        "top_bottom_thickness": { "default_value": 1 },
+        "bottom_thickness": { "default_value": 1 }
+    }
+}

resources/extruders/gmax15plus_dual_extruder_0.def.json

@@ -0,0 +1,28 @@
+{
+    "id": "gmax15plus_dual_extruder_0",
+    "version": 2,
+    "name": "Left Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "gmax15plus_dual",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 0,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_offset_x": { "default_value": 0.0 },
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
+		"machine_nozzle_size": { "default_value": 0.5 },
+		
+		"machine_extruder_start_pos_abs": { "default_value": true },
+        "machine_extruder_start_pos_x": { "value": 40 },
+        "machine_extruder_start_pos_y": { "value": 210 },
+        "machine_extruder_end_pos_abs": { "default_value": true },
+        "machine_extruder_end_pos_x": { "value": 40 },
+        "machine_extruder_end_pos_y": { "value": 210 }
+
+    }
+}

resources/extruders/gmax15plus_dual_extruder_1.def.json

@@ -0,0 +1,30 @@
+{
+    "id": "gmax15plus_dual_extruder_1",
+    "version": 2,
+    "name": "Right Extruder",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "gmax15plus_dual",
+        "position": "1"
+    },
+
+    "overrides": {
+        "extruder_nr": {
+            "default_value": 1,
+            "maximum_value": "1"
+        },
+        "machine_nozzle_offset_x": { "default_value": 0.0 },
+        "machine_nozzle_offset_y": { "default_value": 0.0 },
+		"machine_nozzle_size": { "default_value": 0.5 },
+		
+		"machine_extruder_start_pos_abs": { "default_value": true },
+        "machine_extruder_start_pos_x": { "value": 40 },
+        "machine_extruder_start_pos_y": { "value": 210 },
+        "machine_extruder_end_pos_abs": { "default_value": true },
+        "machine_extruder_end_pos_x": { "value": 40 },
+        "machine_extruder_end_pos_y": { "value": 210 }
+
+    }
+}
+
+

resources/quality/gmax15plus/gmax15plus_pla_dual_normal.inst.cfg

@@ -0,0 +1,72 @@
+[general]
+version = 2
+name = gMax 1.5+ Dual Normal Layers
+definition = gmax15plus_dual
+
+[metadata]
+type = quality
+quality_type = normal
+weight = -1
+setting_version = 4
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.28
+
+infill_before_walls = False
+infill_overlap = 20
+infill_pattern = grid
+
+speed_slowdown_layers = 1
+acceleration_enabled = True
+acceleration_print = 400
+acceleration_travel = 700
+
+coasting_enable = False
+coasting_volume = 0.0625
+
+retraction_combing = off
+retraction_amount = 0.75
+retraction_speed = 70
+material_flow = 98
+material_diameter = 1.75
+
+support_use_towers = False
+support_z_distance = 0.2
+support_xy_distance = 1.5
+support_join_distance = 10
+support_interface_enable = True
+support_interface_pattern = lines
+
+adhesion_type = skirt
+skirt_gap = 2
+
+cool_fan_speed = 70
+cool_fan_speed_max = 85
+skin_overlap = 10
+speed_print = 50
+speed_infill = =math.ceil(speed_print * 0.85)
+speed_layer_0 = =math.ceil(speed_print * 0.45)
+speed_topbottom = =math.ceil(speed_print * 0.75)
+speed_wall = =math.ceil(speed_print * 0.5)
+speed_wall_x = =math.ceil(speed_print * 0.7)
+
+top_bottom_pattern = lines
+top_layers = 4
+top_thickness = 1
+bottom_layers = 2
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none
+
+ooze_shield_angle = 20
+ooze_shield_dist = 4
+ooze_shield_enabled = True
+prime_tower_enable = False
+prime_tower_position_x = 350
+prime_tower_position_y = 350
+prime_tower_wall_thickness = 2
+switch_extruder_retraction_amount = 6
+switch_extruder_retraction_speeds = 60
+
+material_standby_temperature = =material_print_temperature - 10

resources/quality/gmax15plus/gmax15plus_pla_dual_thick.inst.cfg

@@ -0,0 +1,72 @@
+[general]
+version = 2
+name = gMax 1.5+ Dual Thick Layers
+definition = gmax15plus_dual
+
+[metadata]
+type = quality
+quality_type = course
+weight = -2
+setting_version = 4
+global_quality = True
+
+[values]
+layer_height = 0.28
+layer_height_0 = 0.32
+
+infill_before_walls = False
+infill_overlap = 20
+infill_pattern = grid
+
+speed_slowdown_layers = 1
+acceleration_enabled = True
+acceleration_print = 400
+acceleration_travel = 700
+
+coasting_enable = False
+coasting_volume = 0.0625
+
+retraction_combing = off
+retraction_amount = 0.75
+retraction_speed = 70
+material_flow = 98
+material_diameter = 1.75
+
+support_use_towers = False
+support_z_distance = 0.2
+support_xy_distance = 1.5
+support_join_distance = 10
+support_interface_enable = True
+support_interface_pattern = lines
+
+adhesion_type = skirt
+skirt_gap = 2
+
+cool_fan_speed = 70
+cool_fan_speed_max = 85
+skin_overlap = 10
+speed_print = 40
+speed_infill = =math.ceil(speed_print * 0.85)
+speed_layer_0 = =math.ceil(speed_print * 0.5)
+speed_topbottom = =math.ceil(speed_print * 0.75)
+speed_wall = =math.ceil(speed_print * 0.5)
+speed_wall_x = =math.ceil(speed_print * 0.7)
+
+top_bottom_pattern = lines
+top_layers = 3
+top_thickness = 1
+bottom_layers = 2
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none
+
+ooze_shield_angle = 20
+ooze_shield_dist = 4
+ooze_shield_enabled = True
+prime_tower_enable = False
+prime_tower_position_x = 350
+prime_tower_position_y = 350
+prime_tower_wall_thickness = 2
+switch_extruder_retraction_amount = 6
+switch_extruder_retraction_speeds = 60
+
+material_standby_temperature = =material_print_temperature - 10

resources/quality/gmax15plus/gmax15plus_pla_dual_thin.inst.cfg

@@ -0,0 +1,72 @@
+[general]
+version = 2
+name = gMax 1.5+ Dual Thin Layers
+definition = gmax15plus_dual
+
+[metadata]
+type = quality
+quality_type = high
+weight = 0
+setting_version = 4
+global_quality = True
+
+[values]
+layer_height = 0.16
+layer_height_0 = 0.2
+
+infill_before_walls = False
+infill_overlap = 20
+infill_pattern = grid
+
+speed_slowdown_layers = 1
+acceleration_enabled = True
+acceleration_print = 400
+acceleration_travel = 700
+
+coasting_enable = False
+coasting_volume = 0.0625
+
+retraction_combing = off
+retraction_amount = 0.75
+retraction_speed = 70
+material_flow = 98
+material_diameter = 1.75
+
+support_use_towers = False
+support_z_distance = 0.2
+support_xy_distance = 1.5
+support_join_distance = 10
+support_interface_enable = True
+support_interface_pattern = lines
+
+adhesion_type = skirt
+skirt_gap = 2
+
+cool_fan_speed = 70
+cool_fan_speed_max = 85
+skin_overlap = 10
+speed_print = 40
+speed_infill = =math.ceil(speed_print * 0.85)
+speed_layer_0 = =math.ceil(speed_print * 0.4)
+speed_topbottom = =math.ceil(speed_print * 0.75)
+speed_wall = =math.ceil(speed_print * 0.5)
+speed_wall_x = =math.ceil(speed_print * 0.7)
+
+top_bottom_pattern = lines
+top_layers = 4
+top_thickness = 1
+bottom_layers = 2
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none
+
+ooze_shield_angle = 20
+ooze_shield_dist = 4
+ooze_shield_enabled = True
+prime_tower_enable = False
+prime_tower_position_x = 350
+prime_tower_position_y = 350
+prime_tower_wall_thickness = 2
+switch_extruder_retraction_amount = 6
+switch_extruder_retraction_speeds = 60
+
+material_standby_temperature = =material_print_temperature - 10

resources/quality/gmax15plus/gmax15plus_pla_dual_very_thick.inst.cfg

@@ -0,0 +1,71 @@
+[general]
+version = 2
+name = gMax 1.5+ Dual Very Thick Layers
+definition = gmax15plus_dual
+
+[metadata]
+type = quality
+quality_type = extra_course
+weight = -3
+setting_version = 4
+global_quality = True
+
+[values]
+layer_height = 0.32
+
+infill_before_walls = False
+infill_overlap = 20
+infill_pattern = grid
+
+speed_slowdown_layers = 1
+acceleration_enabled = True
+acceleration_print = 400
+acceleration_travel = 700
+
+coasting_enable = False
+coasting_volume = 0.0625
+
+retraction_combing = off
+retraction_amount = 0.75
+retraction_speed = 70
+material_flow = 98
+material_diameter = 1.75
+
+support_use_towers = False
+support_z_distance = 0.2
+support_xy_distance = 1.5
+support_join_distance = 10
+support_interface_enable = True
+support_interface_pattern = lines
+
+adhesion_type = skirt
+skirt_gap = 2
+
+cool_fan_speed = 70
+cool_fan_speed_max = 85
+skin_overlap = 10
+speed_print = 40
+speed_infill = =math.ceil(speed_print * 0.85)
+speed_layer_0 = =math.ceil(speed_print * 0.45)
+speed_topbottom = =math.ceil(speed_print * 0.75)
+speed_wall = =math.ceil(speed_print * 0.5)
+speed_wall_x = =math.ceil(speed_print * 0.7)
+
+top_bottom_pattern = lines
+top_layers = 3
+top_thickness = 1
+bottom_layers = 2
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none
+
+ooze_shield_angle = 20
+ooze_shield_dist = 4
+ooze_shield_enabled = True
+prime_tower_enable = False
+prime_tower_position_x = 350
+prime_tower_position_y = 350
+prime_tower_wall_thickness = 2
+switch_extruder_retraction_amount = 6
+switch_extruder_retraction_speeds = 60
+
+material_standby_temperature = =material_print_temperature - 10

resources/quality/gmax15plus/gmax15plus_pla_normal.inst.cfg

@@ -0,0 +1,62 @@
+[general]
+version = 2
+name = gMax 1.5+ Normal Layers
+definition = gmax15plus
+
+[metadata]
+type = quality
+quality_type = normal
+weight = -1
+setting_version = 4
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.28
+
+infill_before_walls = False
+infill_overlap = 20
+infill_pattern = grid
+
+speed_slowdown_layers = 1
+acceleration_enabled = True
+acceleration_print = 400
+acceleration_travel = 700
+
+coasting_enable = False
+coasting_volume = 0.0625
+
+retraction_combing = off
+retraction_amount = 0.75
+retraction_speed = 70
+material_flow = 98
+material_diameter = 1.75
+
+support_use_towers = False
+support_z_distance = 0.2
+support_xy_distance = 1.5
+support_join_distance = 10
+support_interface_enable = True
+support_interface_pattern = lines
+
+adhesion_type = skirt
+skirt_gap = 2
+
+cool_fan_speed = 70
+cool_fan_speed_max = 85
+skin_overlap = 10
+speed_print = 50
+speed_infill = =math.ceil(speed_print * 0.85)
+speed_layer_0 = =math.ceil(speed_print * 0.6)
+speed_topbottom = =math.ceil(speed_print * 0.75)
+speed_wall = =math.ceil(speed_print * 0.5)
+speed_wall_x = =math.ceil(speed_wall * 0.7)
+
+top_bottom_pattern = lines
+top_layers = 4
+top_thickness = 1
+bottom_layers = 2
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none
+
+

resources/quality/gmax15plus/gmax15plus_pla_thick.inst.cfg

@@ -0,0 +1,60 @@
+[general]
+version = 2
+name = gMax 1.5+ Thick Layers
+definition = gmax15plus
+
+[metadata]
+type = quality
+quality_type = course
+weight = -2
+setting_version = 4
+global_quality = True
+
+[values]
+layer_height = 0.28
+layer_height_0 = 0.32
+
+infill_before_walls = False
+infill_overlap = 20
+infill_pattern = grid
+
+speed_slowdown_layers = 1
+acceleration_enabled = True
+acceleration_print = 400
+acceleration_travel = 700
+
+coasting_enable = False
+coasting_volume = 0.0625
+
+retraction_combing = off
+retraction_amount = 0.75
+retraction_speed = 70
+material_flow = 98
+material_diameter = 1.75
+
+support_use_towers = False
+support_z_distance = 0.2
+support_xy_distance = 1.5
+support_join_distance = 10
+support_interface_enable = True
+support_interface_pattern = lines
+
+adhesion_type = skirt
+skirt_gap = 2
+
+cool_fan_speed = 70
+cool_fan_speed_max = 85
+skin_overlap = 10
+speed_print = 50
+speed_infill = =math.ceil(speed_print * 0.85)
+speed_layer_0 = =math.ceil(speed_print * 0.6)
+speed_topbottom = =math.ceil(speed_print * 0.75)
+speed_wall = =math.ceil(speed_print * 0.5)
+speed_wall_x = =math.ceil(speed_wall * 0.7)
+
+top_bottom_pattern = lines
+top_layers = 3
+top_thickness = 1
+bottom_layers = 2
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none

resources/quality/gmax15plus/gmax15plus_pla_thin.inst.cfg

@@ -0,0 +1,60 @@
+[general]
+version = 2
+name = gMax 1.5+ Thin Layers
+definition = gmax15plus
+
+[metadata]
+type = quality
+quality_type = high
+weight = 0
+setting_version = 4
+global_quality = True
+
+[values]
+layer_height = 0.16
+layer_height_0 = 0.2
+
+infill_before_walls = False
+infill_overlap = 20
+infill_pattern = grid
+
+speed_slowdown_layers = 1
+acceleration_enabled = True
+acceleration_print = 400
+acceleration_travel = 700
+
+coasting_enable = False
+coasting_volume = 0.0625
+
+retraction_combing = off
+retraction_amount = 0.75
+retraction_speed = 70
+material_flow = 98
+material_diameter = 1.75
+
+support_use_towers = False
+support_z_distance = 0.2
+support_xy_distance = 1.5
+support_join_distance = 10
+support_interface_enable = True
+support_interface_pattern = lines
+
+adhesion_type = skirt
+skirt_gap = 2
+
+cool_fan_speed = 70
+cool_fan_speed_max = 85
+skin_overlap = 10
+speed_print = 55
+speed_infill = =math.ceil(speed_print * 0.85)
+speed_layer_0 = =math.ceil(speed_print * 0.6)
+speed_topbottom = =math.ceil(speed_print * 0.75)
+speed_wall = =math.ceil(speed_print * 0.5)
+speed_wall_x = =math.ceil(speed_wall * 0.7)
+
+top_bottom_pattern = lines
+top_layers = 5
+top_thickness = 1
+bottom_layers = 3
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none

resources/quality/gmax15plus/gmax15plus_pla_very_thick.inst.cfg

@@ -0,0 +1,59 @@
+[general]
+version = 2
+name = gMax 1.5+ Very Thick Layers
+definition = gmax15plus
+
+[metadata]
+type = quality
+quality_type = extra_course
+weight = -3
+setting_version = 4
+global_quality = True
+
+[values]
+layer_height = 0.32
+
+infill_before_walls = False
+infill_overlap = 20
+infill_pattern = grid
+
+speed_slowdown_layers = 1
+acceleration_enabled = True
+acceleration_print = 400
+acceleration_travel = 700
+
+coasting_enable = False
+coasting_volume = 0.0625
+
+retraction_combing = off
+retraction_amount = 0.75
+retraction_speed = 70
+material_flow = 98
+material_diameter = 1.75
+
+support_use_towers = False
+support_z_distance = 0.2
+support_xy_distance = 1.5
+support_join_distance = 10
+support_interface_enable = True
+support_interface_pattern = lines
+
+adhesion_type = skirt
+skirt_gap = 2
+
+cool_fan_speed = 70
+cool_fan_speed_max = 85
+skin_overlap = 10
+speed_print = 45
+speed_infill = =math.ceil(speed_print * 0.85)
+speed_layer_0 = =math.ceil(speed_print * 0.6)
+speed_topbottom = =math.ceil(speed_print * 0.75)
+speed_wall = =math.ceil(speed_print * 0.6)
+speed_wall_x = =math.ceil(speed_wall * 0.7)
+
+top_bottom_pattern = lines
+top_layers = 3
+top_thickness = 1
+bottom_layers = 2
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none

resources/variants/gmax15plus_025_e3d.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.25mm E3D (Difficult)
+version = 2
+definition = gmax15plus
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.25

resources/variants/gmax15plus_04_e3d.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.4mm E3D
+version = 2
+definition = gmax15plus
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.4

resources/variants/gmax15plus_05_e3d.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm E3D (Default)
+version = 2
+definition = gmax15plus
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/gmax15plus_05_jhead.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm J-Head
+version = 2
+definition = gmax15plus
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/gmax15plus_06_e3d.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.6mm E3D
+version = 2
+definition = gmax15plus
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.6

resources/variants/gmax15plus_08_e3d.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.8mm E3D
+version = 2
+definition = gmax15plus
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.8

resources/variants/gmax15plus_10_jhead.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 1.0mm J-Head
+version = 2
+definition = gmax15plus
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/gmax15plus_dual_025_e3d.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.25mm E3D (Difficult)
+version = 2
+definition = gmax15plus_dual
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.25

resources/variants/gmax15plus_dual_04_e3d.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.4mm E3D
+version = 2
+definition = gmax15plus_dual
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.4

resources/variants/gmax15plus_dual_05_e3d.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm E3D (Default)
+version = 2
+definition = gmax15plus_dual
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/gmax15plus_dual_05_jhead.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.5mm J-Head
+version = 2
+definition = gmax15plus_dual
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.5

resources/variants/gmax15plus_dual_06_e3d.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.6mm E3D
+version = 2
+definition = gmax15plus_dual
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.6

resources/variants/gmax15plus_dual_08_e3d.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 0.8mm E3D
+version = 2
+definition = gmax15plus_dual
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.8

resources/variants/gmax15plus_dual_10_jhead.inst.cfg

@@ -0,0 +1,12 @@
+[general]
+name = 1.0mm J-Head
+version = 2
+definition = gmax15plus_dual
+
+[metadata]
+author = gcreate
+type = variant
+setting_version = 4
+
+[values]
+machine_nozzle_size = 0.5