Merge pull request #19128 from Ultimaker/PP-371-Prevent-wrong-temperature-with-support-materials

Preventing PVA and BAM to alter temperatures

resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.1mm.inst.cfg

@@ -16,6 +16,8 @@ _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0
 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
 _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_heat_up_speed = 1.56
 material_print_temperature = =default_material_print_temperature - 5
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.2mm.inst.cfg

@@ -16,6 +16,8 @@ _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0
 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
 _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_heat_up_speed = 1.56
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
 skin_material_flow = =material_flow * 0.965

resources/quality/ultimaker_factor4/um_f4_aa0.4_bam_0.3mm.inst.cfg

@@ -16,6 +16,8 @@ _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0
 _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
 _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_heat_up_speed = 1.56
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
 skin_material_flow = =material_flow * 0.965

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.1mm.inst.cfg

@@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 prime_tower_min_volume = 15

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.2mm.inst.cfg

@@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 prime_tower_min_volume = 15

resources/quality/ultimaker_factor4/um_f4_bb0.4_pva_0.3mm.inst.cfg

@@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 prime_tower_min_volume = 15

resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.2mm.inst.cfg

@@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 prime_tower_min_volume = 15

resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.3mm.inst.cfg

@@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 prime_tower_min_volume = 15

resources/quality/ultimaker_factor4/um_f4_bb0.8_pva_0.4mm.inst.cfg

@@ -18,6 +18,8 @@ _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 1
 acceleration_support_bottom = 100
 acceleration_support_interface = 1500
 brim_replaces_support = False
+build_volume_temperature = =40 if extruders_enabled_count > 1 else 35
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 prime_tower_min_volume = 15

resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg

@@ -13,6 +13,8 @@ weight = -1
 
 [values]
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg

@@ -13,6 +13,8 @@ weight = 0
 
 [values]
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg

@@ -13,6 +13,8 @@ weight = -2
 
 [values]
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg

@@ -14,6 +14,8 @@ weight = -3
 
 [values]
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg

@@ -14,7 +14,9 @@ weight = 1
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg

@@ -14,7 +14,9 @@ weight = -1
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 retraction_count_max = 5

resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg

@@ -14,7 +14,9 @@ weight = 0
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg

@@ -14,7 +14,9 @@ weight = -2
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg

@@ -15,7 +15,9 @@ weight = -3
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg

@@ -14,7 +14,9 @@ weight = -2
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 retraction_count_max = 5

resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg

@@ -14,7 +14,9 @@ weight = -3
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg

@@ -14,7 +14,9 @@ weight = -4
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg

@@ -13,6 +13,8 @@ weight = -1
 
 [values]
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg

@@ -13,6 +13,8 @@ weight = 0
 
 [values]
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100

resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg

@@ -13,6 +13,8 @@ weight = -2
 
 [values]
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg

@@ -14,6 +14,8 @@ weight = -3
 
 [values]
 brim_replaces_support = False
+build_volume_temperature = =50 if extruders_enabled_count > 1 else 24
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5

resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg

@@ -14,7 +14,9 @@ weight = 1
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg

@@ -14,7 +14,9 @@ weight = -1
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 retraction_count_max = 5

resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg

@@ -14,7 +14,9 @@ weight = 0
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg

@@ -14,7 +14,9 @@ weight = -2
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg

@@ -15,7 +15,9 @@ weight = -3
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.2mm.inst.cfg

@@ -14,7 +14,9 @@ weight = -2
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 minimum_support_area = 4
 retraction_count_max = 5

resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.3mm.inst.cfg

@@ -14,7 +14,9 @@ weight = -3
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4

resources/quality/ultimaker_s5/um_s5_bb0.8_pva_0.4mm.inst.cfg

@@ -14,7 +14,9 @@ weight = -4
 [values]
 acceleration_prime_tower = 1500
 brim_replaces_support = False
+build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
+default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
 initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
 minimum_support_area = 4