Add TinyBoy profile

Updated

Update

TinyBoy / mago

Add TinyBoy and mago 3D Printer profile

resources/definitions/tinyboy.def.json

@@ -0,0 +1,103 @@
+{
+    "name": "TinyBoy",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata": {
+        "author": "Fred Chan",
+        "manufacturer": "TinyBoy / mago",
+        "category": "tinyboy",		
+        "visible": false,
+        "file_formats": "text/x-gcode",
+	"has_materials": false,
+        "has_machine_quality": true,
+        "preferred_quality_type": "normal",		
+	"platform_texture": "tinyboy2.png",		
+	"platform_offset": [ 0, 0, 0 ],
+	"machine_extruder_trains":
+        {
+            "0": "tinyboy_e10_extruder_0"
+        }
+    },
+    "overrides": {
+        "machine_width": {
+            "default_value": 100
+        },
+        "machine_depth": {
+            "default_value": 100
+        },
+        "machine_height": {
+            "default_value": 105
+        },
+        "machine_head_polygon": {
+            "default_value": [
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
+                [30, 34]
+            ]
+        },
+        "layer_height_0": {
+            "default_value": 0.2
+        },
+        "top_bottom_thickness": {
+            "default_value": 0.9
+        },
+        "top_bottom_pattern_0": {
+            "default_value": "concentric"
+        },
+        "infill_pattern": {
+            "value": "'triangles'"
+        },
+        "retraction_enable": {
+            "default_value": true
+        },
+        "retraction_amount": {
+            "default_value": 6
+        },
+        "retraction_speed": {
+            "default_value": 20
+        },
+        "cool_min_layer_time": {
+            "default_value": 10
+        },
+        "adhesion_type": {
+            "default_value": "skirt"
+        },
+        "skirt_line_count": {
+            "default_value": 4
+        },
+        "skirt_gap": {
+            "default_value": 5
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y210; home X axis and push Y forward\nM84 ; disable motors"
+        },
+		"machine_center_is_zero": {
+			"default_value": false
+		},
+        "machine_heated_bed": {
+            "default_value": false
+        },
+        "gantry_height": {
+            "default_value": 30
+        },
+        "acceleration_enabled": {
+            "default_value": true
+        },
+        "acceleration_print": {
+            "default_value": 500
+        },
+        "acceleration_travel": {
+            "default_value": 500
+        },
+        "jerk_enabled": {
+            "default_value": true
+        },
+        "jerk_print": {
+            "default_value": 20
+        },
+        "jerk_travel": {
+            "default_value": 20
+        }
+    }
+}

resources/definitions/tinyboy_e10.def.json

@@ -0,0 +1,31 @@
+{
+    "version": 2,
+    "name": "TinyBoy E10_J10_L10_M10",
+    "inherits": "tinyboy",
+    "metadata": {
+        "visible": true,
+		"machine_extruder_trains":
+        {
+            "0": "tinyboy_e10_extruder_0"
+        }
+    },
+	
+    "overrides": {	
+        "machine_name": { "default_value": "TinyBoy E10" },
+        "machine_width": {
+            "default_value": 100
+        },
+        "machine_depth": {
+            "default_value": 100
+        },
+        "machine_height": {
+            "default_value": 105
+        },
+        "machine_start_gcode": {
+            "default_value": "G28 ;Home\nG1 Z15.0 F2000 ;Move the platform"
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0\nM140 S0\nG92 E80\nG1 E-80 F2000\nG28 X0 Y0\nM84"
+        }
+    }
+}

resources/definitions/tinyboy_e16.def.json

@@ -0,0 +1,24 @@
+{
+    "version": 2,
+    "name": "TinyBoy E16_L16_M16",
+    "inherits": "tinyboy",
+    "metadata": {
+        "visible": true,
+		"machine_extruder_trains":
+        {
+            "0": "tinyboy_e10_extruder_0"
+        }
+    },
+    "overrides": {	
+        "machine_name": { "default_value": "TinyBoy E16" },
+        "machine_width":  { "default_value": 100 },
+        "machine_depth":  { "default_value": 100 },
+        "machine_height": { "default_value": 165 },
+        "machine_start_gcode": {
+            "default_value": "G28 ;Home\nG1 Z15.0 F2000 ;Move the platform"
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0\nM140 S0\nG92 E80\nG1 E-80 F2000\nG28 X0 Y0\nM84"
+        }
+    }
+}

resources/definitions/tinyboy_mago.def.json

@@ -0,0 +1,24 @@
+{
+    "version": 2,
+    "name": "mago 3d printer",
+    "inherits": "tinyboy",
+    "metadata": {
+        "visible": true,
+		"machine_extruder_trains":
+        {
+            "0": "tinyboy_e10_extruder_0"
+        }
+    },
+    "overrides": {	
+        "machine_name": { "default_value": "mago 3d printer" },
+        "machine_width":  { "default_value": 100 },
+        "machine_depth":  { "default_value": 100 },
+        "machine_height": { "default_value": 155 },
+        "machine_start_gcode": {
+            "default_value": "G28 ;Home\nG1 Z15.0 F2000 ;Move the platform"
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0\nM140 S0\nG92 E80\nG1 E-80 F2000\nG28 X0 Y0\nM84"
+        }
+    }
+}

resources/definitions/tinyboy_ra20.def.json

@@ -0,0 +1,27 @@
+{
+    "version": 2,
+    "name": "TinyBoy RA20",
+    "inherits": "tinyboy",
+    "metadata": {
+        "visible": true,
+		"machine_extruder_trains":
+        {
+            "0": "tinyboy_e10_extruder_0"
+        }
+    },
+
+    "overrides": {	
+        "machine_name":   { "default_value": "TinyBoy RA20" },
+        "machine_width":  { "default_value": 120 },
+        "machine_depth":  { "default_value": 120 },
+        "machine_height": { "default_value": 205 },
+        "machine_heated_bed": { "default_value": true },
+
+        "machine_start_gcode": {
+            "default_value": "G28 ;Home\nG1 Z15.0 F2000 ;Move the platform"
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0\nM140 S0\nG92 E80\nG1 E-80 F2000\nG28 X0 Y0\nM84"
+        }
+    }
+}

resources/extruders/tinyboy_e10_extruder_0.def.json

@@ -0,0 +1,16 @@
+{
+    "id": "tinyboy_e10_extruder_0",
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "tinyboy_e10",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.3 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}

resources/extruders/tinyboy_e16_extruder_0.def.json

@@ -0,0 +1,16 @@
+{
+    "id": "tinyboy_e10_extruder_0",
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "tinyboy_e10",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.3 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}

resources/extruders/tinyboy_ra20_extruder_0.def.json

@@ -0,0 +1,16 @@
+{
+    "id": "tinyboy_e10_extruder_0",
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "tinyboy_e10",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.3 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}

resources/quality/TinyBoy E10_J10_L10_M10/tinyboy_e10_draft.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = Draft
+definition = tinyboy_e10
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = draft
+weight = 0
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.3
+layer_height_0 = 0.3
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 60
+speed_support = 60
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/TinyBoy E10_J10_L10_M10/tinyboy_e10_high.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = High
+definition = tinyboy_e10
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = high
+weight = 2
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.1
+layer_height_0 = 0.1
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 50
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/TinyBoy E10_J10_L10_M10/tinyboy_e10_normal.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = Normal
+definition = tinyboy_e10
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = normal
+weight = 1
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/TinyBoy E16_L16_M16/tinyboy_e16_draft.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = Draft
+definition = tinyboy_e16
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = draft
+weight = 0
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.3
+layer_height_0 = 0.3
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 60
+speed_support = 60
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/TinyBoy E16_L16_M16/tinyboy_e16_high.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = High
+definition = tinyboy_e16
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = high
+weight = 2
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.1
+layer_height_0 = 0.1
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 50
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/TinyBoy E16_L16_M16/tinyboy_e16_normal.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = Normal
+definition = tinyboy_e16
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = normal
+weight = 1
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/TinyBoy RA20/tinyboy_ra20_draft.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = Draft
+definition = tinyboy_ra20
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = draft
+weight = 0
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = none
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.3
+layer_height_0 = 0.3
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 60
+speed_support = 60
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/TinyBoy RA20/tinyboy_ra20_high.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = High
+definition = tinyboy_ra20
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = high
+weight = 2
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = none
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.1
+layer_height_0 = 0.1
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 50
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/TinyBoy RA20/tinyboy_ra20_normal.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = Normal
+definition = tinyboy_ra20
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = normal
+weight = 1
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = none
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2