3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-08-08 14:34:01 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 7

Merge branch 'smartavionics-mb-anchor-skin-in-infill'

Browse source
This commit is contained in:
Tim Kuipers 2017-03-06 13:45:46 +01:00
commit 34d99b5ab3
1 changed files with 68 additions and 0 deletions
Download patch file Download diff file Expand all files Collapse all files

68
resources/definitions/fdmprinter.def.json
View file

@ -1243,6 +1243,74 @@
"minimum_value": "0",
"default_value": 0,
"settable_per_mesh": true
},
"expand_skins_into_infill":
{
"label": "Expand Skins Into Infill",
"description": "Expand skin areas of top and/or bottom skin of flat surfaces. By default, skins stop under the wall lines that surround infill but this can lead to holes appearing when the infill density is low. This setting extends the skins beyond the wall lines so that the infill on the next layer rests on skin.",
"type": "bool",
"default_value": false,
"settable_per_mesh": true,
"children":
{
"expand_upper_skins":
{
"label": "Expand Upper Skins",
"description": "Expand upper skin areas (areas with air above) so that they support infill above.",
"type": "bool",
"default_value": false,
"value": "expand_skins_into_infill",
"settable_per_mesh": true
},
"expand_lower_skins":
{
"label": "Expand Lower Skins",
"description": "Expand lower skin areas (areas with air below) so that they are anchored by the infill layers above and below.",
"type": "bool",
"default_value": false,
"settable_per_mesh": true
}
}
},
"expand_skins_expand_distance":
{
"label": "Skin Expand Distance",
"description": "The distance the skins are expanded into the infill. The default distance is enough to bridge the gap between the infill lines and will stop holes appearing in the skin where it meets the wall when the infill density is low. A smaller distance will often be sufficient.",
"unit": "mm",
"type": "float",
"default_value": 2.8,
"value": "infill_line_distance * 1.4",
"minimum_value": "0",
"enabled": "expand_upper_skins or expand_lower_skins",
"settable_per_mesh": true
},
"min_skin_angle_for_expansion":
{
"label": "Minimum Skin Angle for Expansion",
"description": "Top and or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope.",
"unit": "°",
"type": "float",
"minimum_value": "0",
"maximum_value": "90",
"maximum_value_warning": "45",
"default_value": 20,
"enabled": "expand_upper_skins or expand_lower_skins",
"settable_per_mesh": true,
"children":
{
"min_skin_width_for_expansion":
{
"label": "Minimum Skin Width for Expansion",
"description": "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical.",
"unit": "mm",
"type": "float",
"default_value": 2.24,
"value": "top_layers * layer_height / math.tan(math.radians(min_skin_angle_for_expansion))",
"minimum_value": "0",
"enabled": "expand_upper_skins or expand_lower_skins",
"settable_per_mesh": true
}
}
}
}
},