mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-07-25 07:33:57 -06:00
Merge branch 'feature_first_layer_travel_speed'
This commit is contained in:
commit
34ac8cf66f
1 changed files with 36 additions and 6 deletions
|
@ -1511,15 +1511,45 @@
|
|||
},
|
||||
"speed_layer_0": {
|
||||
"label": "Initial Layer Speed",
|
||||
"description": "The print speed for the initial layer. A lower value is advised to improve adhesion to the build plate.",
|
||||
"description": "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate.",
|
||||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"default_value": 30,
|
||||
"minimum_value": "0.1",
|
||||
"maximum_value": "299792458000",
|
||||
"maximum_value_warning": "300",
|
||||
"settable_per_mesh": true,
|
||||
"children":
|
||||
{
|
||||
"speed_print_layer_0":
|
||||
{
|
||||
"label": "Initial Layer Print Speed",
|
||||
"description": "The speed of printing for the initial layer. A lower value is advised to improve adhesion to the build plate.",
|
||||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"default_value": 30,
|
||||
"value": "speed_layer_0",
|
||||
"minimum_value": "0.1",
|
||||
"maximum_value": "299792458000",
|
||||
"maximum_value_warning": "300",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"speed_travel_layer_0":
|
||||
{
|
||||
"label": "Initial Layer Travel Speed",
|
||||
"description": "The speed of travel moves in the initial layer. A lower value is advised to prevent pulling previously printed parts away from the build plate.",
|
||||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"default_value": 60,
|
||||
"value": "speed_layer_0 * speed_travel / speed_print",
|
||||
"minimum_value": "0.1",
|
||||
"maximum_value": "299792458000",
|
||||
"maximum_value_warning": "300",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
}
|
||||
},
|
||||
"skirt_brim_speed": {
|
||||
"label": "Skirt/Brim Speed",
|
||||
"description": "The speed at which the skirt and brim are printed. Normally this is done at the initial layer speed, but sometimes you might want to print the skirt or brim at a different speed.",
|
||||
|
|
Loading…
Add table
Add a link
Reference in a new issue