mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-08 22:35:03 -06:00
Merge remote-tracking branch 'refs/remotes/Ultimaker/master'
This commit is contained in:
Brecht Nuyttens
commit
33ba9a274d
434 changed files with 38422 additions and 9936 deletions
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "101Hero",
|
||||
"version": 2,
|
||||
"name": "101Hero",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "3Dator",
|
||||
"version": 2,
|
||||
"name": "3Dator",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -48,9 +47,9 @@
|
|||
"default_value": 30
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": ";Sliced at: {day} {date} {time}\nM104 S{material_print_temperature} ;set temperatures\nM140 S{material_bed_temperature}\nM109 S{material_print_temperature} ;wait for temperatures\nM190 S{material_bed_temperature}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 Z0 ;move Z to min endstops\nG28 X0 Y0 ;move X/Y to min endstops\nG29 ;Auto Level\nG1 Z0.6 F{travel_speed} ;move the Nozzle near the Bed\nG92 E0\nG1 Y0 ;zero the extruded length\nG1 X10 E30 F500 ;printing a Line from right to left\nG92 E0 ;zero the extruded length again\nG1 Z2\nG1 F{travel_speed}\nM117 Printing...;Put printing message on LCD screen\nM150 R255 U255 B255 P4 ;Change LED Color to white" },
|
||||
"default_value": ";Sliced at: {day} {date} {time}\nM104 S{material_print_temperature} ;set temperatures\nM140 S{material_bed_temperature}\nM109 S{material_print_temperature} ;wait for temperatures\nM190 S{material_bed_temperature}\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 Z0 ;move Z to min endstops\nG28 X0 Y0 ;move X/Y to min endstops\nG29 ;Auto Level\nG1 Z0.6 F{speed_travel} ;move the Nozzle near the Bed\nG92 E0\nG1 Y0 ;zero the extruded length\nG1 X10 E30 F500 ;printing a Line from right to left\nG92 E0 ;zero the extruded length again\nG1 Z2\nG1 F{speed_travel}\nM117 Printing...;Put printing message on LCD screen\nM150 R255 U255 B255 P4 ;Change LED Color to white" },
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
||||
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "PRi3",
|
||||
"name": "ABAX PRi3",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "PRi5",
|
||||
"name": "ABAX PRi5",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "Titan",
|
||||
"name": "ABAX Titan",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "alya3dp",
|
||||
"name": "ALYA",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -41,10 +40,10 @@
|
|||
"default_value": "RepRap"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to max endstops\nG1 Z115.0 F{travel_speed} ;move th e platform up 20mm\nG28 Z0 ;move Z to max endstop\nG1 Z15.0 F{travel_speed} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM301 H1 P26.38 I2.57 D67.78\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
"default_value": ";Sliced at: {day} {date} {time}\n;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}\n;Print time: {print_time}\n;Filament used: {filament_amount}m {filament_weight}g\n;Filament cost: {filament_cost}\n;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line\n;M109 S{print_temperature} ;Uncomment to add your own temperature line\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to max endstops\nG1 Z115.0 F{speed_travel} ;move th e platform up 20mm\nG28 Z0 ;move Z to max endstop\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM301 H1 P26.38 I2.57 D67.78\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
|
||||
"default_value": ";End GCode\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nG28 Z0\nM84 ;steppers off\nG90 ;absolute positioning\n;{profile_string}"
|
||||
}
|
||||
}
|
||||
}
|
||||
55
resources/definitions/anycubic_i3_mega.def.json
Normal file
55
resources/definitions/anycubic_i3_mega.def.json
Normal file
|
|
@ -0,0 +1,55 @@
|
|||
{
|
||||
"version":2,
|
||||
"name":"Anycubic i3 Mega",
|
||||
"inherits":"fdmprinter",
|
||||
"metadata":{
|
||||
"visible":true,
|
||||
"author":"TheTobby",
|
||||
"manufacturer":"Anycubic",
|
||||
"file_formats":"text/x-gcode",
|
||||
"icon":"icon_ultimaker2",
|
||||
"platform":"anycubic_i3_mega_platform.stl",
|
||||
"has_materials": false,
|
||||
"has_machine_quality": true,
|
||||
"preferred_quality": "*normal*"
|
||||
},
|
||||
|
||||
"overrides":{
|
||||
"machine_name":{
|
||||
"default_value":"Anycubic i3 Mega"
|
||||
},
|
||||
"machine_heated_bed":{
|
||||
"default_value":true
|
||||
},
|
||||
"machine_width":{
|
||||
"default_value":210
|
||||
},
|
||||
"machine_height":{
|
||||
"default_value":205
|
||||
},
|
||||
"machine_depth":{
|
||||
"default_value":210
|
||||
},
|
||||
"machine_center_is_zero":{
|
||||
"default_value":false
|
||||
},
|
||||
"machine_nozzle_size":{
|
||||
"default_value":0.4
|
||||
},
|
||||
"material_diameter":{
|
||||
"default_value":1.75
|
||||
},
|
||||
"gantry_height":{
|
||||
"default_value":0
|
||||
},
|
||||
"machine_gcode_flavor":{
|
||||
"default_value":"RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode":{
|
||||
"default_value":"G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\nG5"
|
||||
},
|
||||
"machine_end_gcode":{
|
||||
"default_value":"M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle\nto release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops\nso the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "bfb",
|
||||
"name": "BFB",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "bq_hephestos",
|
||||
"name": "BQ Prusa i3 Hephestos",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "bq_hephestos_2",
|
||||
"version": 2,
|
||||
"name": "BQ Hephestos 2",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "bq_hephestos_xl",
|
||||
"version": 2,
|
||||
"name": "BQ Prusa i3 Hephestos XL",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "bq_witbox",
|
||||
"version": 2,
|
||||
"name": "BQ Witbox",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "bq_witbox_2",
|
||||
"version": 2,
|
||||
"name": "BQ Witbox 2",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "builder_premium_large",
|
||||
"version": 2,
|
||||
"name": "Builder Premium Large",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "builder_premium_medium",
|
||||
"version": 2,
|
||||
"name": "Builder Premium Medium",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "builder_premium_small",
|
||||
"version": 2,
|
||||
"name": "Builder Premium Small",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "cartesio",
|
||||
"name": "Cartesio",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "creality_cr10",
|
||||
"name": "Creality CR-10",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "creality_cr10s4",
|
||||
"name": "Creality CR-10 S4",
|
||||
"version": 2,
|
||||
"inherits": "creality_cr10",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "creality_cr10s5",
|
||||
"name": "Creality CR-10 S5",
|
||||
"version": 2,
|
||||
"inherits": "creality_cr10",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "custom",
|
||||
"version": 2,
|
||||
"name": "Custom FDM printer",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "Dagoma_discoeasy200",
|
||||
"name": "Dagoma DiscoEasy200",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "Delta_Go",
|
||||
"name": "Delta Go",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "deltabot",
|
||||
"name": "DeltaBot",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "deltacomb",
|
||||
"version": 2,
|
||||
"name": "Deltacomb 3D",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "easyarts_ares",
|
||||
"name": "EasyArts Ares",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -11,7 +10,7 @@
|
|||
},
|
||||
"overrides": {
|
||||
"machine_start_gcode": {
|
||||
"default_value": "; -- START GCODE --\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 \nG29 Z0.12 ;Auto-bedleveling with Z offset \nG92 E0 ;zero the extruded length \nG1 F2000 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{travel_speed}\nM117 Printing...\n; -- end of START GCODE --"
|
||||
"default_value": "; -- START GCODE --\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 \nG29 Z0.12 ;Auto-bedleveling with Z offset \nG92 E0 ;zero the extruded length \nG1 F2000 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\n; -- end of START GCODE --"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "; -- START GCODE --\nG28 ; Home all axes\nM104 S0 ;extruder heater off\n;M140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n;M84 ;steppers off\nG90 ;absolute positioning\n; -- end of START GCODE --"
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "fabtotum",
|
||||
"version": 2,
|
||||
"name": "FABtotum Personal Fabricator",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "fdmextruder",
|
||||
"name": "Extruder",
|
||||
"version": 2,
|
||||
"metadata":
|
||||
|
|
@ -182,6 +181,27 @@
|
|||
}
|
||||
}
|
||||
},
|
||||
"material": {
|
||||
"label": "Material",
|
||||
"icon": "category_material",
|
||||
"description": "Material",
|
||||
"type": "category",
|
||||
"children": {
|
||||
"material_diameter": {
|
||||
"label": "Diameter",
|
||||
"description": "Adjusts the diameter of the filament used. Match this value with the diameter of the used filament.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 2.85,
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value_warning": "0.4",
|
||||
"maximum_value_warning": "3.5",
|
||||
"enabled": "machine_gcode_flavor != \"UltiGCode\"",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
}
|
||||
},
|
||||
"platform_adhesion":
|
||||
{
|
||||
"label": "Build Plate Adhesion",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "fdmprinter",
|
||||
"name": "FDM Printer Base Description",
|
||||
"version": 2,
|
||||
"metadata":
|
||||
|
|
@ -1615,7 +1614,7 @@
|
|||
"infill_overlap":
|
||||
{
|
||||
"label": "Infill Overlap Percentage",
|
||||
"description": "The amount of overlap between the infill and the walls. A slight overlap allows the walls to connect firmly to the infill.",
|
||||
"description": "The amount of overlap between the infill and the walls as a percentage of the infill line width. A slight overlap allows the walls to connect firmly to the infill.",
|
||||
"unit": "%",
|
||||
"type": "float",
|
||||
"default_value": 10,
|
||||
|
|
@ -1636,7 +1635,7 @@
|
|||
"default_value": 0.04,
|
||||
"minimum_value_warning": "-0.5 * machine_nozzle_size",
|
||||
"maximum_value_warning": "machine_nozzle_size",
|
||||
"value": "0.5 * ( infill_line_width + (wall_line_width_x if wall_line_count > 1 else wall_line_width_0) ) * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0",
|
||||
"value": "0.5 * (infill_line_width + (wall_line_width_x if wall_line_count > 1 else wall_line_width_0)) * infill_overlap / 100 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0",
|
||||
"enabled": "infill_sparse_density > 0 and infill_pattern != 'concentric'",
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
|
|
@ -1645,7 +1644,7 @@
|
|||
"skin_overlap":
|
||||
{
|
||||
"label": "Skin Overlap Percentage",
|
||||
"description": "The amount of overlap between the skin and the walls as a percentage of the line width. A slight overlap allows the walls to connect firmly to the skin. This is a percentage of the average line widths of the skin lines and the innermost wall.",
|
||||
"description": "The amount of overlap between the skin and the walls as a percentage of the skin line width. A slight overlap allows the walls to connect firmly to the skin. This is a percentage of the average line widths of the skin lines and the innermost wall.",
|
||||
"unit": "%",
|
||||
"type": "float",
|
||||
"default_value": 5,
|
||||
|
|
@ -1666,7 +1665,7 @@
|
|||
"default_value": 0.02,
|
||||
"minimum_value_warning": "-0.5 * machine_nozzle_size",
|
||||
"maximum_value_warning": "machine_nozzle_size",
|
||||
"value": "0.5 * ( skin_line_width + (wall_line_width_x if wall_line_count > 1 else wall_line_width_0) ) * skin_overlap / 100 if top_bottom_pattern != 'concentric' else 0",
|
||||
"value": "0.5 * (skin_line_width + (wall_line_width_x if wall_line_count > 1 else wall_line_width_0)) * skin_overlap / 100 if top_bottom_pattern != 'concentric' else 0",
|
||||
"enabled": "top_bottom_pattern != 'concentric'",
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
|
|
@ -1854,6 +1853,14 @@
|
|||
"settable_per_mesh": true
|
||||
}
|
||||
}
|
||||
},
|
||||
"infill_enable_travel_optimization":
|
||||
{
|
||||
"label": "Enable Travel Optimization",
|
||||
"description": "When enabled, the order in which the infill lines are printed is optimized to reduce the distance travelled. The reduction in travel time achieved very much depends on the model being sliced, infill pattern, density, etc. Note that, for some models that have many small areas of infill, the time to slice the model may be greatly increased.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
}
|
||||
},
|
||||
|
|
@ -3379,7 +3386,6 @@
|
|||
"unit": "s",
|
||||
"type": "float",
|
||||
"default_value": 10,
|
||||
"minimum_value": "cool_min_layer_time",
|
||||
"maximum_value_warning": "600",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
|
|
@ -3477,13 +3483,22 @@
|
|||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"support_tree_enable":
|
||||
{
|
||||
"label": "Tree Support",
|
||||
"description": "Generate a tree-like support with branches that support your print. This may reduce material usage and print time.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
"support_extruder_nr":
|
||||
{
|
||||
"label": "Support Extruder",
|
||||
"description": "The extruder train to use for printing the support. This is used in multi-extrusion.",
|
||||
"type": "extruder",
|
||||
"default_value": "0",
|
||||
"enabled": "support_enable and machine_extruder_count > 1",
|
||||
"enabled": "(support_enable or support_tree_enable) and machine_extruder_count > 1",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"children": {
|
||||
|
|
@ -3494,7 +3509,7 @@
|
|||
"type": "extruder",
|
||||
"default_value": "0",
|
||||
"value": "support_extruder_nr",
|
||||
"enabled": "support_enable and machine_extruder_count > 1",
|
||||
"enabled": "(support_enable or support_tree_enable) and machine_extruder_count > 1",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
|
|
@ -3505,7 +3520,7 @@
|
|||
"type": "extruder",
|
||||
"default_value": "0",
|
||||
"value": "support_extruder_nr",
|
||||
"enabled": "support_enable and machine_extruder_count > 1",
|
||||
"enabled": "(support_enable or support_tree_enable) and machine_extruder_count > 1",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
|
|
@ -3516,7 +3531,7 @@
|
|||
"type": "extruder",
|
||||
"default_value": "0",
|
||||
"value": "support_extruder_nr",
|
||||
"enabled": "support_enable and machine_extruder_count > 1",
|
||||
"enabled": "(support_enable or support_tree_enable) and machine_extruder_count > 1",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"children":
|
||||
|
|
@ -3528,7 +3543,7 @@
|
|||
"type": "extruder",
|
||||
"default_value": "0",
|
||||
"value": "support_interface_extruder_nr",
|
||||
"enabled": "support_enable and machine_extruder_count > 1",
|
||||
"enabled": "(support_enable or support_tree_enable) and machine_extruder_count > 1",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
|
|
@ -3539,7 +3554,7 @@
|
|||
"type": "extruder",
|
||||
"default_value": "0",
|
||||
"value": "support_interface_extruder_nr",
|
||||
"enabled": "support_enable and machine_extruder_count > 1",
|
||||
"enabled": "(support_enable or support_tree_enable) and machine_extruder_count > 1",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
}
|
||||
|
|
@ -3559,7 +3574,7 @@
|
|||
},
|
||||
"default_value": "everywhere",
|
||||
"resolve": "'everywhere' if 'everywhere' in extruderValues('support_type') else 'buildplate'",
|
||||
"enabled": "support_enable",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false
|
||||
},
|
||||
|
|
@ -3574,7 +3589,7 @@
|
|||
"maximum_value_warning": "80",
|
||||
"default_value": 50,
|
||||
"limit_to_extruder": "support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr",
|
||||
"enabled": "support_enable",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_pattern":
|
||||
|
|
@ -3593,7 +3608,7 @@
|
|||
"cross": "Cross"
|
||||
},
|
||||
"default_value": "zigzag",
|
||||
"enabled": "support_enable",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
|
|
@ -3604,7 +3619,7 @@
|
|||
"description": "Connect the ZigZags. This will increase the strength of the zig zag support structure.",
|
||||
"type": "bool",
|
||||
"default_value": true,
|
||||
"enabled": "support_enable and (support_pattern == 'zigzag')",
|
||||
"enabled": "(support_enable or support_tree_enable) and support_pattern == 'zigzag'",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
|
|
@ -3618,7 +3633,8 @@
|
|||
"minimum_value": "0",
|
||||
"maximum_value_warning": "100",
|
||||
"default_value": 15,
|
||||
"enabled": "support_enable",
|
||||
"value": "15 if support_enable else 0 if support_tree_enable else 15",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -3633,7 +3649,7 @@
|
|||
"minimum_value": "0",
|
||||
"minimum_value_warning": "support_line_width",
|
||||
"default_value": 2.66,
|
||||
"enabled": "support_enable",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"value": "0 if support_infill_rate == 0 else (support_line_width * 100) / support_infill_rate * (2 if support_pattern == 'grid' else (3 if support_pattern == 'triangles' else 1))",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"settable_per_mesh": false,
|
||||
|
|
@ -3651,7 +3667,7 @@
|
|||
"maximum_value_warning": "machine_nozzle_size",
|
||||
"default_value": 0.1,
|
||||
"limit_to_extruder": "support_interface_extruder_nr if support_interface_enable else support_infill_extruder_nr",
|
||||
"enabled": "support_enable",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"settable_per_mesh": true,
|
||||
"children":
|
||||
{
|
||||
|
|
@ -3664,7 +3680,7 @@
|
|||
"maximum_value_warning": "machine_nozzle_size",
|
||||
"default_value": 0.1,
|
||||
"type": "float",
|
||||
"enabled": "support_enable",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance')",
|
||||
"limit_to_extruder": "support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
|
|
@ -3680,7 +3696,7 @@
|
|||
"value": "extruderValue(support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr, 'support_z_distance') if support_type == 'everywhere' else 0",
|
||||
"limit_to_extruder": "support_bottom_extruder_nr if support_bottom_enable else support_infill_extruder_nr",
|
||||
"type": "float",
|
||||
"enabled": "support_enable and resolveOrValue('support_type') == 'everywhere'",
|
||||
"enabled": "(support_enable or support_tree_enable) and resolveOrValue('support_type') == 'everywhere'",
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
}
|
||||
|
|
@ -3695,7 +3711,7 @@
|
|||
"maximum_value_warning": "1.5 * machine_nozzle_tip_outer_diameter",
|
||||
"default_value": 0.7,
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"enabled": "support_enable",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_xy_overrides_z":
|
||||
|
|
@ -3790,10 +3806,114 @@
|
|||
"maximum_value_warning": "0.75 * machine_nozzle_size",
|
||||
"maximum_value": "resolveOrValue('layer_height') * 8",
|
||||
"value": "resolveOrValue('layer_height')",
|
||||
"enabled": "support_enable and support_infill_rate > 0",
|
||||
"enabled": "(support_enable or support_tree_enable) and support_infill_rate > 0",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"settable_per_mesh": false
|
||||
},
|
||||
"support_tree_angle":
|
||||
{
|
||||
"label": "Tree Support Branch Angle",
|
||||
"description": "The angle of the branches. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach.",
|
||||
"unit": "°",
|
||||
"type": "float",
|
||||
"minimum_value": "0",
|
||||
"maximum_value": "90",
|
||||
"maximum_value_warning": "60",
|
||||
"default_value": 40,
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"enabled": "support_tree_enable",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"support_tree_branch_distance":
|
||||
{
|
||||
"label": "Tree Support Branch Distance",
|
||||
"description": "How far apart the branches need to be when they touch the model. Making this distance small will cause the tree support to touch the model at more points, causing better overhang but making support harder to remove.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"minimum_value": "0.001",
|
||||
"default_value": 4,
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"enabled": "support_tree_enable",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_tree_branch_diameter":
|
||||
{
|
||||
"label": "Tree Support Branch Diameter",
|
||||
"description": "The diameter of the thinnest branches of tree support. Thicker branches are more sturdy. Branches towards the base will be thicker than this.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "support_line_width * 2",
|
||||
"default_value": 2,
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"enabled": "support_tree_enable",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"support_tree_branch_diameter_angle":
|
||||
{
|
||||
"label": "Tree Support Branch Diameter Angle",
|
||||
"description": "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the tree support.",
|
||||
"unit": "°",
|
||||
"type": "float",
|
||||
"minimum_value": "0",
|
||||
"maximum_value": "89.9999",
|
||||
"maximum_value_warning": "15",
|
||||
"default_value": 5,
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"enabled": "support_tree_enable",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"support_tree_collision_resolution":
|
||||
{
|
||||
"label": "Tree Support Collision Resolution",
|
||||
"description": "Resolution to compute collisions with to avoid hitting the model. Setting this lower will produce more accurate trees that fail less often, but increases slicing time dramatically.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"minimum_value": "0.001",
|
||||
"minimum_value_warning": "support_line_width / 4",
|
||||
"maximum_value_warning": "support_line_width * 2",
|
||||
"default_value": 0.4,
|
||||
"value": "support_line_width / 2",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"enabled": "support_tree_enable and support_tree_branch_diameter_angle > 0",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
"support_tree_wall_thickness":
|
||||
{
|
||||
"label": "Tree Support Wall Thickness",
|
||||
"description": "The thickness of the walls of the branches of tree support. Thicker walls take longer to print but don't fall over as easily.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "wall_line_width",
|
||||
"default_value": 0.8,
|
||||
"value": "support_line_width",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"enabled": "support_tree_enable",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"children":
|
||||
{
|
||||
"support_tree_wall_count":
|
||||
{
|
||||
"label": "Tree Support Wall Line Count",
|
||||
"description": "The number of walls of the branches of tree support. Thicker walls take longer to print but don't fall over as easily.",
|
||||
"type": "int",
|
||||
"minimum_value": "0",
|
||||
"minimum_value_warning": "1",
|
||||
"default_value": 1,
|
||||
"value": "round(support_tree_wall_thickness / support_line_width)",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"enabled": "support_tree_enable",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
}
|
||||
},
|
||||
"gradual_support_infill_steps":
|
||||
{
|
||||
"label": "Gradual Support Infill Steps",
|
||||
|
|
@ -3803,7 +3923,7 @@
|
|||
"minimum_value": "0",
|
||||
"maximum_value_warning": "1 if (support_pattern == 'cross' or support_pattern == 'lines' or support_pattern == 'zigzag' or support_pattern == 'concentric' or support_pattern == 'concentric_3d') else 5",
|
||||
"maximum_value": "999999 if support_line_distance == 0 else (20 - math.log(support_line_distance) / math.log(2))",
|
||||
"enabled": "support_enable and support_infill_rate > 0",
|
||||
"enabled": "(support_enable or support_tree_enable) and support_infill_rate > 0",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"settable_per_mesh": false
|
||||
},
|
||||
|
|
@ -3816,7 +3936,7 @@
|
|||
"default_value": 1,
|
||||
"minimum_value": "0.0001",
|
||||
"minimum_value_warning": "3 * resolveOrValue('layer_height')",
|
||||
"enabled": "support_enable and support_infill_rate > 0 and gradual_support_infill_steps > 0",
|
||||
"enabled": "(support_enable or support_tree_enable) and support_infill_rate > 0 and gradual_support_infill_steps > 0",
|
||||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"settable_per_mesh": false
|
||||
},
|
||||
|
|
@ -3827,7 +3947,7 @@
|
|||
"type": "bool",
|
||||
"default_value": false,
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
"enabled": "support_enable",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"settable_per_mesh": true,
|
||||
"children":
|
||||
{
|
||||
|
|
@ -3839,7 +3959,7 @@
|
|||
"default_value": false,
|
||||
"value": "extruderValue(support_roof_extruder_nr, 'support_interface_enable')",
|
||||
"limit_to_extruder": "support_roof_extruder_nr",
|
||||
"enabled": "support_enable",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_bottom_enable":
|
||||
|
|
@ -3850,7 +3970,7 @@
|
|||
"default_value": false,
|
||||
"value": "extruderValue(support_bottom_extruder_nr, 'support_interface_enable')",
|
||||
"limit_to_extruder": "support_bottom_extruder_nr",
|
||||
"enabled": "support_enable",
|
||||
"enabled": "support_enable or support_tree_enable",
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
}
|
||||
|
|
@ -3866,7 +3986,7 @@
|
|||
"minimum_value_warning": "0.2 + layer_height",
|
||||
"maximum_value_warning": "10",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
"enabled": "support_interface_enable and support_enable",
|
||||
"enabled": "support_interface_enable and (support_enable or support_tree_enable)",
|
||||
"settable_per_mesh": true,
|
||||
"children":
|
||||
{
|
||||
|
|
@ -3882,7 +4002,7 @@
|
|||
"maximum_value_warning": "10",
|
||||
"value": "extruderValue(support_roof_extruder_nr, 'support_interface_height')",
|
||||
"limit_to_extruder": "support_roof_extruder_nr",
|
||||
"enabled": "support_roof_enable and support_enable",
|
||||
"enabled": "support_roof_enable and (support_enable or support_tree_enable)",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_bottom_height":
|
||||
|
|
@ -3897,7 +4017,7 @@
|
|||
"minimum_value_warning": "min(0.2 + layer_height, support_bottom_stair_step_height)",
|
||||
"maximum_value_warning": "10",
|
||||
"limit_to_extruder": "support_bottom_extruder_nr",
|
||||
"enabled": "support_bottom_enable and support_enable",
|
||||
"enabled": "support_bottom_enable and (support_enable or support_tree_enable)",
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
}
|
||||
|
|
@ -3924,7 +4044,7 @@
|
|||
"minimum_value": "0",
|
||||
"maximum_value_warning": "100",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
"enabled": "support_interface_enable and support_enable",
|
||||
"enabled": "support_interface_enable and (support_enable or support_tree_enable)",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"children":
|
||||
|
|
@ -3939,7 +4059,7 @@
|
|||
"minimum_value": "0",
|
||||
"maximum_value": "100",
|
||||
"limit_to_extruder": "support_roof_extruder_nr",
|
||||
"enabled": "support_roof_enable and support_enable",
|
||||
"enabled": "support_roof_enable and (support_enable or support_tree_enable)",
|
||||
"value": "extruderValue(support_roof_extruder_nr, 'support_interface_density')",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -3956,7 +4076,7 @@
|
|||
"minimum_value_warning": "support_roof_line_width - 0.0001",
|
||||
"value": "0 if support_roof_density == 0 else (support_roof_line_width * 100) / support_roof_density * (2 if support_roof_pattern == 'grid' else (3 if support_roof_pattern == 'triangles' else 1))",
|
||||
"limit_to_extruder": "support_roof_extruder_nr",
|
||||
"enabled": "support_roof_enable and support_enable",
|
||||
"enabled": "support_roof_enable and (support_enable or support_tree_enable)",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
|
|
@ -3972,7 +4092,7 @@
|
|||
"minimum_value": "0",
|
||||
"maximum_value": "100",
|
||||
"limit_to_extruder": "support_bottom_extruder_nr",
|
||||
"enabled": "support_bottom_enable and support_enable",
|
||||
"enabled": "support_bottom_enable and (support_enable or support_tree_enable)",
|
||||
"value": "extruderValue(support_bottom_extruder_nr, 'support_interface_density')",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
|
|
@ -3989,7 +4109,7 @@
|
|||
"minimum_value_warning": "support_bottom_line_width - 0.0001",
|
||||
"value": "0 if support_bottom_density == 0 else (support_bottom_line_width * 100) / support_bottom_density * (2 if support_bottom_pattern == 'grid' else (3 if support_bottom_pattern == 'triangles' else 1))",
|
||||
"limit_to_extruder": "support_bottom_extruder_nr",
|
||||
"enabled": "support_bottom_enable and support_enable",
|
||||
"enabled": "support_bottom_enable and (support_enable or support_tree_enable)",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
|
|
@ -4013,7 +4133,7 @@
|
|||
},
|
||||
"default_value": "concentric",
|
||||
"limit_to_extruder": "support_interface_extruder_nr",
|
||||
"enabled": "support_interface_enable and support_enable",
|
||||
"enabled": "support_interface_enable and (support_enable or support_tree_enable)",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true,
|
||||
"children":
|
||||
|
|
@ -4035,7 +4155,7 @@
|
|||
"default_value": "concentric",
|
||||
"value": "extruderValue(support_roof_extruder_nr, 'support_interface_pattern')",
|
||||
"limit_to_extruder": "support_roof_extruder_nr",
|
||||
"enabled": "support_roof_enable and support_enable",
|
||||
"enabled": "support_roof_enable and (support_enable or support_tree_enable)",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
},
|
||||
|
|
@ -4056,7 +4176,7 @@
|
|||
"default_value": "concentric",
|
||||
"value": "extruderValue(support_bottom_extruder_nr, 'support_interface_pattern')",
|
||||
"limit_to_extruder": "support_bottom_extruder_nr",
|
||||
"enabled": "support_bottom_enable and support_enable",
|
||||
"enabled": "support_bottom_enable and (support_enable or support_tree_enable)",
|
||||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": true
|
||||
}
|
||||
|
|
@ -4113,6 +4233,18 @@
|
|||
"limit_to_extruder": "support_infill_extruder_nr",
|
||||
"enabled": "support_enable and support_use_towers",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_mesh_drop_down":
|
||||
{
|
||||
"label": "Drop Down Support Mesh",
|
||||
"description": "Make support everywhere below the support mesh, so that there's no overhang in the support mesh.",
|
||||
"type": "bool",
|
||||
"default_value": true,
|
||||
"enabled": "support_mesh",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
}
|
||||
}
|
||||
},
|
||||
|
|
@ -5141,18 +5273,6 @@
|
|||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"support_mesh_drop_down":
|
||||
{
|
||||
"label": "Drop Down Support Mesh",
|
||||
"description": "Make support everywhere below the support mesh, so that there's no overhang in the support mesh.",
|
||||
"type": "bool",
|
||||
"default_value": true,
|
||||
"enabled": "support_mesh",
|
||||
"settable_per_mesh": true,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false,
|
||||
"settable_globally": false
|
||||
},
|
||||
"anti_overhang_mesh":
|
||||
{
|
||||
"label": "Anti Overhang Mesh",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "grr_neo",
|
||||
"version": 2,
|
||||
"name": "German RepRap Neo",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "BEEVERYCREATIVE-helloBEEprusa",
|
||||
"version": 2,
|
||||
"name": "Hello BEE Prusa",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "imade3d_jellybox",
|
||||
"version": 2,
|
||||
"name": "IMADE3D JellyBOX",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "innovo-inventor",
|
||||
"version": 2,
|
||||
"name": "Innovo INVENTOR",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -47,7 +46,7 @@
|
|||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28 ; Home extruder\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM190 S{material_bed_temperature}\nM104 T0 S{material_print_temperature}\nM109 T0 S{material_print_temperature}\nM104 T1 S{material_print_temperature}\nM109 T1 S{material_print_temperature}\nG32 S3 ; auto level\nG92 E0 ; Reset extruder position"
|
||||
"default_value": "G28 ; Home extruder\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nM190 S{material_bed_temperature}\nM104 T0 S{material_print_temperature}\nM109 T0 S{material_print_temperature}\nM104 T1 S{material_print_temperature}\nM109 T1 S{material_print_temperature}\n;G32 S3 ; auto level\nG92 E0 ; Reset extruder position"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0 ; turn off extruders\nM140 S0 ; heated bed heater off\nG91 ; relative positioning\nG1 E-2 F5000; retract 2mm\nG28 Z; move bed down\nG90 ; absolute positioning\nM84 ; disable motors"
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "julia",
|
||||
"name": "Julia",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "kemiq_q2_beta",
|
||||
"version": 2,
|
||||
"name": "Kemiq Q2 Beta",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "kemiq_q2_gama",
|
||||
"version": 2,
|
||||
"name": "Kemiq Q2 Gama",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "kossel_mini",
|
||||
"version": 2,
|
||||
"name": "Kossel Mini",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "kossel_pro",
|
||||
"version": 2,
|
||||
"name": "Kossel Pro",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "kupido",
|
||||
"name": "Kupido",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "makeR_pegasus",
|
||||
"version": 2,
|
||||
"name": "makeR Pegasus",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "makeR_prusa_tairona_i3",
|
||||
"version": 2,
|
||||
"name": "makeR Prusa Tairona i3",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "makeit_pro_l",
|
||||
"version": 2,
|
||||
"name": "MAKEiT Pro-L",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "makeit_pro_m",
|
||||
"version": 2,
|
||||
"name": "MAKEiT Pro-M",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "maker_starter",
|
||||
"version": 2,
|
||||
"name": "3DMaker Starter",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "makerbotreplicator",
|
||||
"name": "MakerBotReplicator",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
{
|
||||
"id": "m180",
|
||||
"id": "malyan_m180",
|
||||
"version": 2,
|
||||
"name": "Malyan M180",
|
||||
"inherits": "fdmprinter",
|
||||
85
resources/definitions/malyan_m200.def.json
Normal file
85
resources/definitions/malyan_m200.def.json
Normal file
|
|
@ -0,0 +1,85 @@
|
|||
{
|
||||
"id": "malyan_m200",
|
||||
"version": 2,
|
||||
"name": "Malyan M200",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"author": "Brian Corbino, Tyler Gibson",
|
||||
"manufacturer": "Malyan",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "malyan_m200_platform.stl",
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"preferred_quality": "*normal*",
|
||||
"supports_usb_connection": true,
|
||||
"visible": true,
|
||||
"first_start_actions": ["MachineSettingsAction"],
|
||||
"supported_actions": ["MachineSettingsAction"]
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Malyan M200" },
|
||||
"speed_print": { "default_value": 50 },
|
||||
"speed_wall_0": { "value": "round(speed_print * 0.75, 2)" },
|
||||
"speed_wall_x": { "value": "speed_print" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
"speed_layer_0": { "value": "round(speed_print / 2.0, 2)" },
|
||||
"speed_travel": { "default_value": 50 },
|
||||
"speed_travel_layer_0": { "default_value": 40 },
|
||||
"speed_infill": { "value": "speed_print" },
|
||||
"speed_topbottom": {"value": "speed_print / 2"},
|
||||
|
||||
"layer_height": { "minimum_value": "0.04375", "maximum_value": "machine_nozzle_size * 0.875", "maximum_value_warning": "machine_nozzle_size * 0.48125 + 0.0875", "default_value": 0.13125 },
|
||||
"line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
|
||||
|
||||
"material_print_temperature": { "minimum_value": "0" },
|
||||
"material_print_temperature_layer_0": { "value": "min(material_print_temperature + 5, 245)" },
|
||||
"material_bed_temperature": { "minimum_value": "0" },
|
||||
"material_bed_temperature_layer_0": { "value": "min(material_bed_temperature + 5, 70)" },
|
||||
"material_standby_temperature": { "minimum_value": "0" },
|
||||
"machine_show_variants": { "default_value": true },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode" : {
|
||||
"default_value": "G21;(metric values)\nG90;(absolute positioning)\nM82;(set extruder to absolute mode)\nM107;(start with the fan off)\nG28;(Home the printer)\nG92 E0;(Reset the extruder to 0)\nG0 Z5 E5 F500;(Move up and prime the nozzle)\nG0 X-1 Z0;(Move outside the printable area)\nG1 Y60 E8 F500;(Draw a priming/wiping line to the rear)\nG1 X-1;(Move a little closer to the print area)\nG1 Y10 E16 F500;(draw more priming/wiping)\nG1 E15 F250;(Small retract)\nG92 E0;(Zero the extruder)"
|
||||
},
|
||||
"machine_end_gcode" : {
|
||||
"default_value": "G0 X0 Y127;(Stick out the part)\nM190 S0;(Turn off heat bed, don't wait.)\nG92 E10;(Set extruder to 10)\nG1 E7 F200;(retract 3mm)\nM104 S0;(Turn off nozzle, don't wait)\nG4 S300;(Delay 5 minutes)\nM107;(Turn off part fan)\nM84;(Turn off stepper motors.)"
|
||||
},
|
||||
"machine_width": { "default_value": 120 },
|
||||
"machine_depth": { "default_value": 120 },
|
||||
"machine_height": { "default_value": 120 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"material_diameter": { "value": 1.75 },
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4,
|
||||
"minimum_value": 0.15
|
||||
},
|
||||
"machine_max_feedrate_x": { "default_value": 150 },
|
||||
"machine_max_feedrate_y": { "default_value": 150 },
|
||||
"machine_max_feedrate_z": { "default_value": 1.5 },
|
||||
"machine_max_feedrate_e": { "default_value": 100 },
|
||||
"machine_max_acceleration_x": { "default_value": 800 },
|
||||
"machine_max_acceleration_y": { "default_value": 800 },
|
||||
"machine_max_acceleration_z": { "default_value": 20 },
|
||||
"machine_max_acceleration_e": { "default_value": 10000 },
|
||||
"machine_max_jerk_xy": { "default_value": 20 },
|
||||
"machine_max_jerk_z": { "default_value": 0.4 },
|
||||
"machine_max_jerk_e": { "default_value": 5},
|
||||
"adhesion_type": { "default_value": "raft" },
|
||||
"raft_margin": { "default_value": 5 },
|
||||
"raft_airgap": { "default_value": 0.2625 },
|
||||
"raft_base_thickness": { "value": "0.30625" },
|
||||
"raft_interface_thickness": { "value": "0.21875" },
|
||||
"raft_surface_layers": { "default_value": 1 },
|
||||
"skirt_line_count": { "default_value": 2},
|
||||
"brim_width" : { "default_value": 5},
|
||||
"start_layers_at_same_position": { "default_value": true},
|
||||
"retraction_combing": { "default_value": "noskin" },
|
||||
"retraction_amount" : { "default_value": 4.5},
|
||||
"retraction_speed" : { "default_value": 40},
|
||||
"coasting_enable": { "default_value": true },
|
||||
"prime_tower_enable": { "default_value": false}
|
||||
}
|
||||
}
|
||||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "mankati_fullscale_xt_plus",
|
||||
"version": 2,
|
||||
"name": "Mankati Fullscale XT Plus",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "mendel90",
|
||||
"name": "Mendel90",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
18
resources/definitions/monoprice_select_mini_v1.def.json
Normal file
18
resources/definitions/monoprice_select_mini_v1.def.json
Normal file
|
|
@ -0,0 +1,18 @@
|
|||
{
|
||||
"id": "monoprice_select_mini_v1",
|
||||
"version": 2,
|
||||
"name": "Monoprice Select Mini V1",
|
||||
"inherits": "malyan_m200",
|
||||
"metadata": {
|
||||
"author": "Brian Corbino, Tyler Gibson",
|
||||
"manufacturer": "Monoprice",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"quality_definition": "malyan_m200",
|
||||
"visible": true
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Monoprice Select Mini V1" }
|
||||
}
|
||||
}
|
||||
25
resources/definitions/monoprice_select_mini_v2.def.json
Normal file
25
resources/definitions/monoprice_select_mini_v2.def.json
Normal file
|
|
@ -0,0 +1,25 @@
|
|||
{
|
||||
"id": "monoprice_select_mini_v2",
|
||||
"version": 2,
|
||||
"name": "Monoprice Select Mini V2 (E3D)",
|
||||
"inherits": "malyan_m200",
|
||||
"metadata": {
|
||||
"author": "Tyler Gibson",
|
||||
"manufacturer": "Monoprice",
|
||||
"category": "Other",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"preferred_quality": "*normal*",
|
||||
"visible": true
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Monoprice Select Mini V2" },
|
||||
"adhesion_type": { "default_value": "brim" },
|
||||
"retraction_combing": { "default_value": "noskin" },
|
||||
"retraction_amount" : { "default_value": 2.5},
|
||||
"retraction_speed" : { "default_value": 40},
|
||||
"material_print_temperature_layer_0": { "value": "material_print_temperature + 5" }
|
||||
}
|
||||
}
|
||||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ord",
|
||||
"name": "RoVa3D",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "peopoly_moai",
|
||||
"version": 2,
|
||||
"name": "Peopoly Moai",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "printrbot_play",
|
||||
"version": 2,
|
||||
"name": "Printrbot Play",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "printrbot_play_heated",
|
||||
"version": 2,
|
||||
"name": "Printrbot Play (Heated Bed)",
|
||||
"inherits": "printrbot_play",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "printrbot_simple",
|
||||
"version": 2,
|
||||
"name": "Printrbot Simple",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "printrbot_simple_extended",
|
||||
"version": 2,
|
||||
"name": "Printrbot Simple Metal Extended",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "prusa_i3",
|
||||
"version": 2,
|
||||
"name": "Prusa i3",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "prusa_i3_mk2",
|
||||
"version": 2,
|
||||
"name": "Prusa i3 Mk2",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "prusa_i3_xl",
|
||||
"version": 2,
|
||||
"name": "Prusa i3 xl",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "punchtec_connect_xl",
|
||||
"name": "Punchtec Connect XL",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "raise3D_N2_dual",
|
||||
"version": 2,
|
||||
"name": "Raise3D N2 Dual",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -33,7 +32,7 @@
|
|||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
|
|
@ -55,9 +54,6 @@
|
|||
"machine_min_cool_heat_time_window": {
|
||||
"default_value": 3600
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "raise3D_N2_plus_dual",
|
||||
"version": 2,
|
||||
"name": "Raise3D N2 Plus Dual",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -55,9 +54,6 @@
|
|||
"machine_min_cool_heat_time_window": {
|
||||
"default_value": 3600
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "raise3D_N2_plus_single",
|
||||
"version": 2,
|
||||
"name": "Raise3D N2 Plus Single",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -50,9 +49,6 @@
|
|||
"machine_min_cool_heat_time_window": {
|
||||
"default_value": 3600
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "raise3D_N2_single",
|
||||
"version": 2,
|
||||
"name": "Raise3D N2 Single",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -50,9 +49,6 @@
|
|||
"machine_min_cool_heat_time_window": {
|
||||
"default_value": 3600
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "RF100",
|
||||
"version": 2,
|
||||
"name": "Renkforce RF100",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "rigid3d",
|
||||
"name": "Rigid3D",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "rigid3d_3rdgen",
|
||||
"name": "Rigid3D 3rdGen",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "rigid3d_hobby",
|
||||
"name": "Rigid3D Hobby",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "rigid3d_zero",
|
||||
"name": "Rigid3D Zero",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "rigid3d_zero2",
|
||||
"name": "Rigid3D Zero2",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "rigidbot",
|
||||
"version": 2,
|
||||
"name": "RigidBot",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "rigidbotbig",
|
||||
"version": 2,
|
||||
"name": "RigidBotBig",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "robo_3d_r1",
|
||||
"name": "Robo 3D R1",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "typeamachines",
|
||||
"version": 2,
|
||||
"name": "Type A Machines Series 1 2014",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
54
resources/definitions/tevo_blackwidow.def.json
Normal file
54
resources/definitions/tevo_blackwidow.def.json
Normal file
|
|
@ -0,0 +1,54 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Tevo Black Widow",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "TheTobby",
|
||||
"manufacturer": "Tevo",
|
||||
"file_formats": "text/x-gcode",
|
||||
"icon": "icon_ultimaker2",
|
||||
"has_materials": false,
|
||||
"has_machine_quality": true,
|
||||
"platform": "prusai3_platform.stl",
|
||||
"preferred_quality": "*normal*"
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": {
|
||||
"default_value": "Tevo Black Widow"
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 350
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 250
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 250
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"gantry_height": {
|
||||
"default_value": 0
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "M280 P0 S160 ; release BLTouch alarm (OK to send for Non BLTouch)\nM420 Z2 ; set fade leveling at 2mm for BLTouch (OK to send for Non BLTouch)\nG28 ; home all\nG29 ; probe bed\nG92 E0 ;zero the extruded length\nG1 X0.0 Y50.0 Z10.0 F3600\n; perform wipe and prime\nG1 Z0.0 F1000\nG1 Z0.2 Y70.0 E9.0 F1000.0 ; prime\nG1 Y100.0 E12.5 F1000.0 ; prime\nG92 E0 ; zero extruder again\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "G92 E0 ; zero the extruded length again\nG1 E-1.5 F500 ; retract the filament to release some of the pressure\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nG28 X0 ; home X axis\nG1 Y245 ; move Y axis to end position\nM84 ; disable motors\nM107 ; turn off fan"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "tevo_tarantula",
|
||||
"version": 2,
|
||||
"name": "Tevo Tarantula",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
@ -67,7 +66,7 @@
|
|||
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nG1 Y200 F3600 ;move baseplate to front for easier access to printed object"
|
||||
"default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y200 F3600 ;move extruder out of the way by moving the baseplate to the front for easier access to printed object\nM84 ;steppers off"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker_base",
|
||||
"version": 2,
|
||||
"name": "Ultimaker",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker2",
|
||||
"version": 2,
|
||||
"name": "Ultimaker 2",
|
||||
"inherits": "ultimaker",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker2_extended",
|
||||
"version": 2,
|
||||
"name": "Ultimaker 2 Extended",
|
||||
"inherits": "ultimaker2",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker2_extended_plus",
|
||||
"version": 2,
|
||||
"name": "Ultimaker 2 Extended+",
|
||||
"inherits": "ultimaker2_plus",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker2_go",
|
||||
"version": 2,
|
||||
"name": "Ultimaker 2 Go",
|
||||
"inherits": "ultimaker2",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker2_plus",
|
||||
"version": 2,
|
||||
"name": "Ultimaker 2+",
|
||||
"inherits": "ultimaker2",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker3",
|
||||
"version": 2,
|
||||
"name": "Ultimaker 3",
|
||||
"inherits": "ultimaker",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker3_extended",
|
||||
"version": 2,
|
||||
"name": "Ultimaker 3 Extended",
|
||||
"inherits": "ultimaker3",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker_original",
|
||||
"version": 2,
|
||||
"name": "Ultimaker Original",
|
||||
"inherits": "ultimaker",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker_original_dual",
|
||||
"version": 2,
|
||||
"name": "Ultimaker Original Dual Extrusion",
|
||||
"inherits": "ultimaker",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "ultimaker_original_plus",
|
||||
"version": 2,
|
||||
"name": "Ultimaker Original+",
|
||||
"inherits": "ultimaker_original",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "uniqbot_one",
|
||||
"version": 2,
|
||||
"name": "Uniqbot",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "K8800",
|
||||
"name": "Vertex Delta K8800",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "vertex_k8400",
|
||||
"version": 2,
|
||||
"name": "Vertex K8400",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "vertex_k8400_dual",
|
||||
"version": 2,
|
||||
"name": "Vertex K8400 Dual",
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
|
|
@ -1,5 +1,4 @@
|
|||
{
|
||||
"id": "zone3d_printer",
|
||||
"name": "Zone3d Printer",
|
||||
"version": 2,
|
||||
"inherits": "fdmprinter",
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue