From eeb49e587c63aafc2e42f53c7706724b99b4d1a6 Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Sat, 11 Jun 2022 17:20:55 +0200 Subject: [PATCH 01/12] Added parameters for optimized prime tower --- resources/definitions/fdmprinter.def.json | 52 ++++++++++++++++------- 1 file changed, 36 insertions(+), 16 deletions(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 9e12d7f7e1..ebbf9faac8 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -983,7 +983,7 @@ "description": "Width of a single prime tower line.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": 0.4, "value": "line_width", "minimum_value": "0.001", @@ -3188,7 +3188,7 @@ "description": "The speed at which the prime tower is printed. Printing the prime tower slower can make it more stable when the adhesion between the different filaments is suboptimal.", "type": "float", "unit": "mm/s", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": 60, "value": "speed_print", "minimum_value": "0.1", @@ -3525,7 +3525,7 @@ "maximum_value_warning": "10000", "default_value": 3000, "value": "acceleration_print", - "enabled": "resolveOrValue('prime_tower_enable') and resolveOrValue('acceleration_enabled')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none' and resolveOrValue('acceleration_enabled')", "settable_per_mesh": false } } @@ -3805,7 +3805,7 @@ "maximum_value_warning": "50", "default_value": 20, "value": "jerk_print", - "enabled": "resolveOrValue('prime_tower_enable') and resolveOrValue('jerk_enabled')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none' and resolveOrValue('jerk_enabled')", "settable_per_mesh": false } } @@ -6112,14 +6112,21 @@ "description": "Settings used for printing with multiple extruders.", "children": { - "prime_tower_enable": + "prime_tower_mode": { - "label": "Enable Prime Tower", + "label": "Prime Tower Mode", "description": "Print a tower next to the print which serves to prime the material after each nozzle switch.", - "type": "bool", + "type": "enum", + "options": + { + "none": "None", + "default": "Default", + "optimized": "Optimized", + "optimized_consistent": "Optimized consistent" + }, + "default_value": "default", "enabled": "extruders_enabled_count > 1", - "default_value": false, - "resolve": "(extruders_enabled_count > 1) and any(extruderValues('prime_tower_enable'))", + "resolve": "(extruders_enabled_count > 1) and any(extruderValues('prime_tower_mode'))", "settable_per_mesh": false, "settable_per_extruder": false }, @@ -6129,7 +6136,7 @@ "description": "The width of the prime tower.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": 20, "resolve": "max(extruderValues('prime_tower_size'))", "minimum_value": "0", @@ -6148,7 +6155,20 @@ "default_value": 6, "minimum_value": "0", "maximum_value_warning": "(resolveOrValue('prime_tower_size') * 0.5) ** 2 * 3.14159 * resolveOrValue('layer_height') - sum(extruderValues('prime_tower_min_volume')) + prime_tower_min_volume", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", + "settable_per_mesh": false, + "settable_per_extruder": true + }, + "prime_tower_max_bridging_distance": + { + "label": "Prime Tower Maximum Bridging Distance", + "description": "The maximum length of the branches which may be printed over the air.", + "unit": "mm", + "type": "float", + "default_value": 5, + "minimum_value": "line_width", + "maximum_value_warning": "10.0", + "enabled": "resolveOrValue('prime_tower_mode') == 'optimized' or resolveOrValue('prime_tower_mode') == 'optimized_consistent'", "settable_per_mesh": false, "settable_per_extruder": true }, @@ -6158,7 +6178,7 @@ "description": "The x coordinate of the position of the prime tower.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": 200, "value": "machine_width - max(extruderValue(skirt_brim_extruder_nr, 'brim_width') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' or (prime_tower_brim_enable and adhesion_type != 'raft') else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - max(map(abs, extruderValues('machine_nozzle_offset_x'))) - 1", "maximum_value": "machine_width / 2 if machine_center_is_zero else machine_width", @@ -6172,7 +6192,7 @@ "description": "The y coordinate of the position of the prime tower.", "type": "float", "unit": "mm", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": 200, "value": "machine_depth - prime_tower_size - max(extruderValue(skirt_brim_extruder_nr, 'brim_width') * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' or (prime_tower_brim_enable and adhesion_type != 'raft') else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(skirt_brim_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) * extruderValue(skirt_brim_extruder_nr, 'initial_layer_line_width_factor') / 100 - (resolveOrValue('draft_shield_dist') if resolveOrValue('draft_shield_enabled') else 0) - max(map(abs, extruderValues('machine_nozzle_offset_y'))) - 3", "maximum_value": "machine_depth / 2 - resolveOrValue('prime_tower_size') if machine_center_is_zero else machine_depth - resolveOrValue('prime_tower_size')", @@ -6185,7 +6205,7 @@ "label": "Wipe Inactive Nozzle on Prime Tower", "description": "After printing the prime tower with one nozzle, wipe the oozed material from the other nozzle off on the prime tower.", "type": "bool", - "enabled": "resolveOrValue('prime_tower_enable')", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "default_value": true, "settable_per_mesh": false, "settable_per_extruder": true @@ -6195,8 +6215,8 @@ "label": "Prime Tower Brim", "description": "Prime-towers might need the extra adhesion afforded by a brim even if the model doesn't. Presently can't be used with the 'Raft' adhesion-type.", "type": "bool", - "enabled": "resolveOrValue('prime_tower_enable') and (resolveOrValue('adhesion_type') != 'raft')", - "resolve": "resolveOrValue('prime_tower_enable') and (resolveOrValue('adhesion_type') in ('none', 'skirt'))", + "enabled": "resolveOrValue('prime_tower_mode') != 'none' and (resolveOrValue('adhesion_type') != 'raft')", + "resolve": "resolveOrValue('prime_tower_mode') != 'none' and (resolveOrValue('adhesion_type') in ('none', 'skirt'))", "default_value": false, "settable_per_mesh": false, "settable_per_extruder": false From 6d7d1b838a48ee006c3b0ff34637837551435e18 Mon Sep 17 00:00:00 2001 From: wawanbreton Date: Sun, 26 Mar 2023 13:20:52 +0000 Subject: [PATCH 02/12] Applied printer-linter format --- resources/definitions/lnl3d_base.def.json | 28 +++++++++---------- resources/definitions/lnl3d_d3.def.json | 8 ++++-- .../definitions/lnl3d_d3_vulcan.def.json | 8 ++++-- .../extruders/lnl3d_extruder_left.def.json | 2 +- .../extruders/lnl3d_extruder_right.def.json | 2 +- ...lnl3d_base_0.2_generic_PETG_super.inst.cfg | 1 + ...lnl3d_base_0.2_generic_PETG_ultra.inst.cfg | 1 + .../lnl3d_base_0.2_generic_PLA_super.inst.cfg | 1 + .../lnl3d_base_0.2_generic_PLA_ultra.inst.cfg | 1 + ...3d_base_0.4_generic_PETG_adaptive.inst.cfg | 1 + .../lnl3d_base_0.4_generic_PETG_low.inst.cfg | 1 + ...3d_base_0.4_generic_PETG_standard.inst.cfg | 1 + ...lnl3d_base_0.4_generic_PETG_super.inst.cfg | 1 + ...l3d_base_0.4_generic_PLA_adaptive.inst.cfg | 1 + .../lnl3d_base_0.4_generic_PLA_low.inst.cfg | 1 + ...l3d_base_0.4_generic_PLA_standard.inst.cfg | 1 + .../lnl3d_base_0.4_generic_PLA_super.inst.cfg | 1 + ...l3d_base_0.4_generic_TPU_adaptive.inst.cfg | 1 + ...l3d_base_0.4_generic_TPU_standard.inst.cfg | 1 + .../lnl3d_base_0.4_generic_TPU_super.inst.cfg | 1 + ...3d_base_0.6_generic_PETG_standard.inst.cfg | 1 + .../lnl3d_base_0.6_generic_PLA_draft.inst.cfg | 1 + .../lnl3d_base_0.6_generic_PLA_low.inst.cfg | 1 + ...l3d_base_0.6_generic_PLA_standard.inst.cfg | 1 + ...l3d_base_0.6_generic_TPU_standard.inst.cfg | 1 + ...lnl3d_base_0.8_generic_PETG_draft.inst.cfg | 1 + .../lnl3d_base_0.8_generic_PLA_draft.inst.cfg | 1 + .../lnl3d_base_0.8_generic_TPU_draft.inst.cfg | 1 + .../lnl3d/lnl3d_base_global_adaptive.inst.cfg | 1 + .../lnl3d/lnl3d_base_global_draft.inst.cfg | 1 + .../lnl3d/lnl3d_base_global_low.inst.cfg | 1 + .../lnl3d/lnl3d_base_global_standard.inst.cfg | 1 + .../lnl3d/lnl3d_base_global_super.inst.cfg | 1 + .../lnl3d/lnl3d_base_global_ultra.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d3_0.2.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d3_0.4.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d3_0.6.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d3_0.8.inst.cfg | 1 + .../lnl3d/lnl3d_d3_vulcan_0.2.inst.cfg | 1 + .../lnl3d/lnl3d_d3_vulcan_0.4.inst.cfg | 1 + .../lnl3d/lnl3d_d3_vulcan_0.6.inst.cfg | 1 + .../lnl3d/lnl3d_d3_vulcan_0.8.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d5_0.2.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d5_0.4.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d5_0.6.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d5_0.8.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d6_0.2.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d6_0.4.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d6_0.6.inst.cfg | 1 + .../variants/lnl3d/lnl3d_d6_0.8.inst.cfg | 1 + 50 files changed, 73 insertions(+), 20 deletions(-) diff --git a/resources/definitions/lnl3d_base.def.json b/resources/definitions/lnl3d_base.def.json index c181e80a8e..5ee0638002 100644 --- a/resources/definitions/lnl3d_base.def.json +++ b/resources/definitions/lnl3d_base.def.json @@ -7,7 +7,7 @@ "author": "LNL3D", "manufacturer": "LNL3D", "file_formats": "text/x-gcode", - "first_start_actions": ["MachineSettingsAction"], + "first_start_actions": [ "MachineSettingsAction" ], "has_machine_quality": true, "has_materials": true, "has_variants": true, @@ -51,13 +51,13 @@ "machine_max_acceleration_x": { "value": 500 }, "machine_max_acceleration_y": { "value": 500 }, "machine_max_acceleration_z": { "value": 100 }, - "machine_max_jerk_e": { "value": 5 }, - "machine_max_jerk_xy": { "value": 10 }, - "machine_max_jerk_z": { "value": 0.4 }, "machine_max_feedrate_e": { "value": 80 }, "machine_max_feedrate_x": { "value": 500 }, "machine_max_feedrate_y": { "value": 500 }, "machine_max_feedrate_z": { "value": 10 }, + "machine_max_jerk_e": { "value": 5 }, + "machine_max_jerk_xy": { "value": 10 }, + "machine_max_jerk_z": { "value": 0.4 }, "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 ;move to min endstops\nG92 E0 ;reset extruder\nG1 E15 F1500 ;move extruder 15mm\nG1 Z15.0 F3000 ;move the header up 15mm\nM117 printing... ;LCD message" }, "material_diameter": { "default_value": 1.75 }, "material_final_print_temperature": { "value": "material_print_temperature" }, @@ -70,7 +70,7 @@ "prime_tower_brim_enable": { "default_value": true }, "prime_tower_wipe_enabled": { "default_value": false }, "raft_airgap": { "default_value": 0.2 }, - "raft_margin": {"default_value": 2 }, + "raft_margin": { "default_value": 2 }, "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'noskin'" }, "retraction_count_max": { "value": 100 }, "retraction_extrusion_window": { "value": 4 }, @@ -79,18 +79,18 @@ "retraction_hop_enabled": { "value": "False" }, "retraction_prime_speed": { - "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')", - "maximum_value": 200 + "maximum_value": 200, + "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')" }, "retraction_retract_speed": { - "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')", - "maximum_value": 200 + "maximum_value": 200, + "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')" }, "retraction_speed": { - "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')", - "maximum_value": 200 + "maximum_value": 200, + "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')" }, "skin_overlap": { "value": 25 }, "skirt_line_count": { "value": 2 }, @@ -117,14 +117,14 @@ "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" }, "switch_extruder_retraction_amount": { "value": 8.0 }, "switch_extruder_retraction_speeds": { "default_value": 60.0 }, - "top_bottom_thickness": { "value": "layer_height_0 + layer_height * 4" }, + "top_bottom_thickness": { "value": "layer_height_0 + layer_height * 4" }, "travel_avoid_other_parts": { "value": false }, "travel_avoid_supports": { "value": true }, "travel_retract_before_outer_wall": { "value": true }, "wall_0_wipe_dist": { "value": 0.0 }, "wall_thickness": { "value": "line_width * 2" }, - "z_seam_type": { "value": "'back'" }, "z_seam_corner": { "value": "'z_seam_corner_weighted'" }, + "z_seam_type": { "value": "'back'" }, "zig_zaggify_infill": { "value": true } } -} +} \ No newline at end of file diff --git a/resources/definitions/lnl3d_d3.def.json b/resources/definitions/lnl3d_d3.def.json index b12e13884b..52e8042306 100755 --- a/resources/definitions/lnl3d_d3.def.json +++ b/resources/definitions/lnl3d_d3.def.json @@ -6,7 +6,11 @@ { "visible": true, "platform": "lnl3d_d3.stl", - "platform_offset": [ 0, 0, 0 ] + "platform_offset": [ + 0, + 0, + 0 + ] }, "overrides": { @@ -17,4 +21,4 @@ "prime_tower_position_x": { "value": "155" }, "prime_tower_position_y": { "value": "155" } } -} +} \ No newline at end of file diff --git a/resources/definitions/lnl3d_d3_vulcan.def.json b/resources/definitions/lnl3d_d3_vulcan.def.json index 4b18ef4fc0..f81cae81c5 100755 --- a/resources/definitions/lnl3d_d3_vulcan.def.json +++ b/resources/definitions/lnl3d_d3_vulcan.def.json @@ -6,7 +6,11 @@ { "visible": true, "platform": "lnl3d_d3.stl", - "platform_offset": [ 0, 0, 0 ] + "platform_offset": [ + 0, + 0, + 0 + ] }, "overrides": { @@ -17,4 +21,4 @@ "prime_tower_position_x": { "value": "155" }, "prime_tower_position_y": { "value": "155" } } -} +} \ No newline at end of file diff --git a/resources/extruders/lnl3d_extruder_left.def.json b/resources/extruders/lnl3d_extruder_left.def.json index 03ed857f0e..7e5d2dfe98 100755 --- a/resources/extruders/lnl3d_extruder_left.def.json +++ b/resources/extruders/lnl3d_extruder_left.def.json @@ -26,4 +26,4 @@ "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 1.75 } } -} +} \ No newline at end of file diff --git a/resources/extruders/lnl3d_extruder_right.def.json b/resources/extruders/lnl3d_extruder_right.def.json index 62e9cd230c..6b5e0993de 100755 --- a/resources/extruders/lnl3d_extruder_right.def.json +++ b/resources/extruders/lnl3d_extruder_right.def.json @@ -26,4 +26,4 @@ "machine_nozzle_size": { "default_value": 0.4 }, "material_diameter": { "default_value": 1.75 } } -} +} \ No newline at end of file diff --git a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_super.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_super.inst.cfg index ca7c0e514a..9e1ed6b824 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_super.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_super.inst.cfg @@ -13,3 +13,4 @@ variant = 0.2mm Nozzle [values] speed_layer_0 = 15 wall_thickness = =line_width*8 + diff --git a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_ultra.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_ultra.inst.cfg index 4d8f10a604..f2d08c5351 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_ultra.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PETG_ultra.inst.cfg @@ -13,3 +13,4 @@ variant = 0.2mm Nozzle [values] speed_layer_0 = 15 wall_thickness = =line_width*8 + diff --git a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_super.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_super.inst.cfg index ae4d279e17..a26d3eeb2e 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_super.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_super.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.2mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_ultra.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_ultra.inst.cfg index 74616e862e..2086268efe 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_ultra.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.2_generic_PLA_ultra.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.2mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_adaptive.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_adaptive.inst.cfg index 4acfd83171..ea0e83055c 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_adaptive.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_adaptive.inst.cfg @@ -13,3 +13,4 @@ variant = 0.4mm Nozzle [values] speed_layer_0 = 15 wall_thickness = =line_width*4 + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_low.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_low.inst.cfg index bd30b8ed51..20575a94de 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_low.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_low.inst.cfg @@ -13,3 +13,4 @@ variant = 0.4mm Nozzle [values] speed_layer_0 = 15 wall_thickness = =line_width*4 + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_standard.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_standard.inst.cfg index 669ef07d98..f8af1bef08 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_standard.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_standard.inst.cfg @@ -13,3 +13,4 @@ variant = 0.4mm Nozzle [values] speed_layer_0 = 15 wall_thickness = =line_width*4 + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_super.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_super.inst.cfg index c70979a5cb..52dfb21b4c 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_super.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PETG_super.inst.cfg @@ -13,3 +13,4 @@ variant = 0.4mm Nozzle [values] speed_layer_0 = 15 wall_thickness = =line_width*4 + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_adaptive.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_adaptive.inst.cfg index 4712e4c3ff..cf38d49ca7 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_adaptive.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_adaptive.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.4mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_low.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_low.inst.cfg index 0dd25c760d..91318eb388 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_low.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_low.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.4mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_standard.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_standard.inst.cfg index 4a537571d1..6566822054 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_standard.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_standard.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.4mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_super.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_super.inst.cfg index f786275820..52448a3e17 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_super.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_PLA_super.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.4mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_adaptive.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_adaptive.inst.cfg index 83603cffdf..ab1fb391e8 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_adaptive.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_adaptive.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.4mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_standard.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_standard.inst.cfg index ab68f0dd73..b1212b7fb7 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_standard.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_standard.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.4mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_super.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_super.inst.cfg index cac46549c1..5e0dd99521 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_super.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.4_generic_TPU_super.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.4mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PETG_standard.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PETG_standard.inst.cfg index f686201f7e..26ca469bf6 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PETG_standard.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PETG_standard.inst.cfg @@ -13,3 +13,4 @@ variant = 0.6mm Nozzle [values] speed_layer_0 = 15 wall_thickness = =line_width*3 + diff --git a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_draft.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_draft.inst.cfg index fd1b439885..3ca8badcf8 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_draft.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_draft.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.6mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_low.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_low.inst.cfg index eb5732b8dc..8cd2acf117 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_low.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_low.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.6mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_standard.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_standard.inst.cfg index 63a740e8ec..7297384566 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_standard.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.6_generic_PLA_standard.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.6mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.6_generic_TPU_standard.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.6_generic_TPU_standard.inst.cfg index 92f0fdfee0..9e59bbd349 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.6_generic_TPU_standard.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.6_generic_TPU_standard.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.6mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.8_generic_PETG_draft.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.8_generic_PETG_draft.inst.cfg index 25dce4e37f..d645385468 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.8_generic_PETG_draft.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.8_generic_PETG_draft.inst.cfg @@ -13,3 +13,4 @@ variant = 0.8mm Nozzle [values] speed_layer_0 = 15 wall_thickness = =line_width*3 + diff --git a/resources/quality/lnl3d/lnl3d_base_0.8_generic_PLA_draft.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.8_generic_PLA_draft.inst.cfg index 6668b1a129..1620bd79a8 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.8_generic_PLA_draft.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.8_generic_PLA_draft.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.8mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_0.8_generic_TPU_draft.inst.cfg b/resources/quality/lnl3d/lnl3d_base_0.8_generic_TPU_draft.inst.cfg index 8a6512c09b..d466d9bd94 100644 --- a/resources/quality/lnl3d/lnl3d_base_0.8_generic_TPU_draft.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_0.8_generic_TPU_draft.inst.cfg @@ -11,3 +11,4 @@ type = quality variant = 0.8mm Nozzle [values] + diff --git a/resources/quality/lnl3d/lnl3d_base_global_adaptive.inst.cfg b/resources/quality/lnl3d/lnl3d_base_global_adaptive.inst.cfg index 6e566239bf..569e8c5264 100644 --- a/resources/quality/lnl3d/lnl3d_base_global_adaptive.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_global_adaptive.inst.cfg @@ -17,3 +17,4 @@ layer_height_0 = 0.20 support_interface_height = =layer_height*6 top_bottom_thickness = =layer_height_0+layer_height*4 wall_thickness = =line_width*3 + diff --git a/resources/quality/lnl3d/lnl3d_base_global_draft.inst.cfg b/resources/quality/lnl3d/lnl3d_base_global_draft.inst.cfg index 34356067f2..b0d87d19bb 100644 --- a/resources/quality/lnl3d/lnl3d_base_global_draft.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_global_draft.inst.cfg @@ -16,3 +16,4 @@ layer_height_0 = 0.32 support_interface_height = =layer_height*4 top_bottom_thickness = =layer_height_0+layer_height*3 wall_thickness = =line_width*2 + diff --git a/resources/quality/lnl3d/lnl3d_base_global_low.inst.cfg b/resources/quality/lnl3d/lnl3d_base_global_low.inst.cfg index 000d7729d3..93d2f918ae 100644 --- a/resources/quality/lnl3d/lnl3d_base_global_low.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_global_low.inst.cfg @@ -16,3 +16,4 @@ layer_height_0 = 0.28 support_interface_height = =layer_height*4 top_bottom_thickness = =layer_height_0+layer_height*3 wall_thickness = =line_width*2 + diff --git a/resources/quality/lnl3d/lnl3d_base_global_standard.inst.cfg b/resources/quality/lnl3d/lnl3d_base_global_standard.inst.cfg index f96004b8d1..796a7ce1d0 100644 --- a/resources/quality/lnl3d/lnl3d_base_global_standard.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_global_standard.inst.cfg @@ -16,3 +16,4 @@ layer_height_0 = 0.2 support_interface_height = =layer_height*4 top_bottom_thickness = =layer_height_0+layer_height*3 wall_thickness = =line_width*2 + diff --git a/resources/quality/lnl3d/lnl3d_base_global_super.inst.cfg b/resources/quality/lnl3d/lnl3d_base_global_super.inst.cfg index f42fb2c6ac..f9cdb2dbf9 100644 --- a/resources/quality/lnl3d/lnl3d_base_global_super.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_global_super.inst.cfg @@ -16,3 +16,4 @@ layer_height_0 = 0.12 support_interface_height = =layer_height*8 top_bottom_thickness = =layer_height_0+layer_height*6 wall_thickness = =line_width*3 + diff --git a/resources/quality/lnl3d/lnl3d_base_global_ultra.inst.cfg b/resources/quality/lnl3d/lnl3d_base_global_ultra.inst.cfg index 2e97b1b620..a4dd6be3da 100644 --- a/resources/quality/lnl3d/lnl3d_base_global_ultra.inst.cfg +++ b/resources/quality/lnl3d/lnl3d_base_global_ultra.inst.cfg @@ -16,3 +16,4 @@ layer_height_0 = 0.12 support_interface_height = =layer_height*12 top_bottom_thickness = =layer_height_0+layer_height*10 wall_thickness = =line_width*3 + diff --git a/resources/variants/lnl3d/lnl3d_d3_0.2.inst.cfg b/resources/variants/lnl3d/lnl3d_d3_0.2.inst.cfg index 63a61e894f..7ae77ff476 100644 --- a/resources/variants/lnl3d/lnl3d_d3_0.2.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d3_0.2.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.2 + diff --git a/resources/variants/lnl3d/lnl3d_d3_0.4.inst.cfg b/resources/variants/lnl3d/lnl3d_d3_0.4.inst.cfg index 678e48f3b3..e8e0d15f7e 100644 --- a/resources/variants/lnl3d/lnl3d_d3_0.4.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d3_0.4.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.4 + diff --git a/resources/variants/lnl3d/lnl3d_d3_0.6.inst.cfg b/resources/variants/lnl3d/lnl3d_d3_0.6.inst.cfg index 7aeb9ef765..fa978ca8c8 100644 --- a/resources/variants/lnl3d/lnl3d_d3_0.6.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d3_0.6.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.6 + diff --git a/resources/variants/lnl3d/lnl3d_d3_0.8.inst.cfg b/resources/variants/lnl3d/lnl3d_d3_0.8.inst.cfg index 5052e08c25..05e72fe6a3 100644 --- a/resources/variants/lnl3d/lnl3d_d3_0.8.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d3_0.8.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.8 + diff --git a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.2.inst.cfg b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.2.inst.cfg index ac652dbedd..fee93aaef2 100644 --- a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.2.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.2.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.2 + diff --git a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.4.inst.cfg b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.4.inst.cfg index 3a7c5d26eb..a76a5aeb76 100644 --- a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.4.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.4.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.4 + diff --git a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.6.inst.cfg b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.6.inst.cfg index ab0e6a9e4d..71884bf1c9 100644 --- a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.6.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.6.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.6 + diff --git a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.8.inst.cfg b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.8.inst.cfg index 5a7e625a5e..0a1269d21e 100644 --- a/resources/variants/lnl3d/lnl3d_d3_vulcan_0.8.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d3_vulcan_0.8.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.8 + diff --git a/resources/variants/lnl3d/lnl3d_d5_0.2.inst.cfg b/resources/variants/lnl3d/lnl3d_d5_0.2.inst.cfg index b5410bc804..62dfd0b0d9 100644 --- a/resources/variants/lnl3d/lnl3d_d5_0.2.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d5_0.2.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.2 + diff --git a/resources/variants/lnl3d/lnl3d_d5_0.4.inst.cfg b/resources/variants/lnl3d/lnl3d_d5_0.4.inst.cfg index 4bbdd3af0f..088b18ed45 100644 --- a/resources/variants/lnl3d/lnl3d_d5_0.4.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d5_0.4.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.4 + diff --git a/resources/variants/lnl3d/lnl3d_d5_0.6.inst.cfg b/resources/variants/lnl3d/lnl3d_d5_0.6.inst.cfg index 985b141ee5..f4ecae1dad 100644 --- a/resources/variants/lnl3d/lnl3d_d5_0.6.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d5_0.6.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.6 + diff --git a/resources/variants/lnl3d/lnl3d_d5_0.8.inst.cfg b/resources/variants/lnl3d/lnl3d_d5_0.8.inst.cfg index 3951b27e5b..da10b5fa7e 100644 --- a/resources/variants/lnl3d/lnl3d_d5_0.8.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d5_0.8.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.8 + diff --git a/resources/variants/lnl3d/lnl3d_d6_0.2.inst.cfg b/resources/variants/lnl3d/lnl3d_d6_0.2.inst.cfg index 522868ce90..886a6bba65 100644 --- a/resources/variants/lnl3d/lnl3d_d6_0.2.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d6_0.2.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.2 + diff --git a/resources/variants/lnl3d/lnl3d_d6_0.4.inst.cfg b/resources/variants/lnl3d/lnl3d_d6_0.4.inst.cfg index 9414cd20be..f7a984cb72 100644 --- a/resources/variants/lnl3d/lnl3d_d6_0.4.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d6_0.4.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.4 + diff --git a/resources/variants/lnl3d/lnl3d_d6_0.6.inst.cfg b/resources/variants/lnl3d/lnl3d_d6_0.6.inst.cfg index 204bf57c3d..5c77bc2d3c 100644 --- a/resources/variants/lnl3d/lnl3d_d6_0.6.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d6_0.6.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.6 + diff --git a/resources/variants/lnl3d/lnl3d_d6_0.8.inst.cfg b/resources/variants/lnl3d/lnl3d_d6_0.8.inst.cfg index 0fcca7db18..f42592214e 100644 --- a/resources/variants/lnl3d/lnl3d_d6_0.8.inst.cfg +++ b/resources/variants/lnl3d/lnl3d_d6_0.8.inst.cfg @@ -10,3 +10,4 @@ type = variant [values] machine_nozzle_size = 0.8 + From 1bdd4a67bdad5d54ff5d260b8c16a6ab149ecd39 Mon Sep 17 00:00:00 2001 From: wawanbreton Date: Tue, 5 Sep 2023 11:20:34 +0000 Subject: [PATCH 03/12] Applied printer-linter format --- resources/definitions/fdmprinter.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index ba47c4977d..67e203abcf 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -8198,4 +8198,4 @@ } } } -} +} \ No newline at end of file From 39db261b4b6eadb2f3e95cbfc055b61c7b9f8bde Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Fri, 3 Nov 2023 13:13:27 +0100 Subject: [PATCH 04/12] Integrate prime tower mode setting --- cura/BuildVolume.py | 4 ++-- plugins/SliceInfoPlugin/SliceInfo.py | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/cura/BuildVolume.py b/cura/BuildVolume.py index 2bfa654d4f..39cd356d3e 100755 --- a/cura/BuildVolume.py +++ b/cura/BuildVolume.py @@ -854,7 +854,7 @@ class BuildVolume(SceneNode): result[extruder.getId()] = [] # Currently, the only normally printed object is the prime tower. - if self._global_container_stack.getProperty("prime_tower_enable", "value"): + if self._global_container_stack.getProperty("prime_tower_mode", "value") != 'none': prime_tower_size = self._global_container_stack.getProperty("prime_tower_size", "value") machine_width = self._global_container_stack.getProperty("machine_width", "value") machine_depth = self._global_container_stack.getProperty("machine_depth", "value") @@ -1182,7 +1182,7 @@ class BuildVolume(SceneNode): _raft_settings = ["adhesion_type", "raft_base_thickness", "raft_interface_layers", "raft_interface_thickness", "raft_surface_layers", "raft_surface_thickness", "raft_airgap", "layer_0_z_overlap"] _extra_z_settings = ["retraction_hop_enabled", "retraction_hop"] _prime_settings = ["extruder_prime_pos_x", "extruder_prime_pos_y", "prime_blob_enable"] - _tower_settings = ["prime_tower_enable", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y", "prime_tower_brim_enable", "prime_tower_base_size", "prime_tower_base_height"] + _tower_settings = ["prime_tower_mode", "prime_tower_size", "prime_tower_position_x", "prime_tower_position_y", "prime_tower_brim_enable", "prime_tower_base_size", "prime_tower_base_height"] _ooze_shield_settings = ["ooze_shield_enabled", "ooze_shield_dist"] _distance_settings = ["infill_wipe_dist", "travel_avoid_distance", "support_offset", "support_enable", "travel_avoid_other_parts", "travel_avoid_supports", "wall_line_count", "wall_line_width_0", "wall_line_width_x"] _extruder_settings = ["support_enable", "support_bottom_enable", "support_roof_enable", "support_infill_extruder_nr", "support_extruder_nr_layer_0", "support_bottom_extruder_nr", "support_roof_extruder_nr", "brim_line_count", "skirt_brim_extruder_nr", "raft_base_extruder_nr", "raft_interface_extruder_nr", "raft_surface_extruder_nr", "adhesion_type"] #Settings that can affect which extruders are used. diff --git a/plugins/SliceInfoPlugin/SliceInfo.py b/plugins/SliceInfoPlugin/SliceInfo.py index 7e7a132c98..04e083520b 100755 --- a/plugins/SliceInfoPlugin/SliceInfo.py +++ b/plugins/SliceInfoPlugin/SliceInfo.py @@ -263,7 +263,7 @@ class SliceInfo(QObject, Extension): print_settings["retraction_enable"] = global_stack.getProperty("retraction_enable", "value") # Prime tower settings - print_settings["prime_tower_enable"] = global_stack.getProperty("prime_tower_enable", "value") + print_settings["prime_tower_mode"] = global_stack.getProperty("prime_tower_mode", "value") # Infill settings print_settings["infill_sparse_density"] = global_stack.getProperty("infill_sparse_density", "value") From 3bf84c88389a8c9cfb801d1fa8b94e6b2e645a93 Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Fri, 24 Nov 2023 14:32:56 +0100 Subject: [PATCH 05/12] Terminology and descriptions refinement --- resources/definitions/fdmprinter.def.json | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 6ee61ab9a8..af08b23cb2 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6595,15 +6595,15 @@ { "prime_tower_mode": { - "label": "Prime Tower Mode", - "description": "Print a tower next to the print which serves to prime the material after each nozzle switch.", + "label": "Prime Tower", + "description": "Print a tower next to the model, which serves to prime the material after each nozzle switch.
  • None: do not generate a prime tower
  • Bucket: generate a solid prime bucket in which secondary materials are primed
  • Sparse bucket: generate a prime bucket while trying to waste as less material as possible
  • Sparse: generate a prime tower as sparse as possible. This will save time and filament, but is only possible if the used materials adhere to each other.
", "type": "enum", "options": { "none": "None", - "default": "Default", - "optimized": "Optimized", - "optimized_consistent": "Optimized consistent" + "default": "Bucket", + "optimized_consistent": "Sparse bucket", + "optimized": "Sparse" }, "default_value": "default", "enabled": "extruders_enabled_count > 1", From 794023711fc4adb530c0277e46fd24d0cfa8a91c Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Wed, 29 Nov 2023 14:06:39 +0100 Subject: [PATCH 06/12] WIP prime tower mode refinement --- resources/definitions/fdmprinter.def.json | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index af08b23cb2..5ab88de33f 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6596,18 +6596,17 @@ "prime_tower_mode": { "label": "Prime Tower", - "description": "Print a tower next to the model, which serves to prime the material after each nozzle switch.
  • None: do not generate a prime tower
  • Bucket: generate a solid prime bucket in which secondary materials are primed
  • Sparse bucket: generate a prime bucket while trying to waste as less material as possible
  • Sparse: generate a prime tower as sparse as possible. This will save time and filament, but is only possible if the used materials adhere to each other.
", + "description": "Print a tower next to the model, which serves to prime the material after each nozzle switch.
  • None: do not generate a prime tower
  • Bucket: generate a bucket in which secondary materials are primed
  • Sparse: generate a prime tower as sparse as possible. This will save time and filament, but is only possible if the used materials adhere to each other.
", "type": "enum", + "value": "'optimized' if all(material_type == extruderValues('material_type')[0] for material_type in extruderValues('material_type')) else 'optimized_consistent'", "options": { "none": "None", - "default": "Bucket", - "optimized_consistent": "Sparse bucket", + "optimized_consistent": "Bucket", "optimized": "Sparse" }, - "default_value": "default", + "default_value": "none", "enabled": "extruders_enabled_count > 1", - "resolve": "(extruders_enabled_count > 1) and any(extruderValues('prime_tower_mode'))", "settable_per_mesh": false, "settable_per_extruder": false }, From 332222f9aa8e1733ad96f20bee8c1f5788ebb6e6 Mon Sep 17 00:00:00 2001 From: wawanbreton Date: Wed, 10 Jan 2024 15:31:30 +0000 Subject: [PATCH 07/12] Applied printer-linter format --- resources/definitions/fdmprinter.def.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 2066ca5bd9..bc25ce590c 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6900,7 +6900,7 @@ "minimum_value": "0", "maximum_value": "min(0.5 * machine_width, 0.5 * machine_depth)", "settable_per_mesh": false, - "settable_per_extruder": false + "settable_per_extruder": false }, "prime_tower_base_height": { From 34555d4dd138f478911c75b539be9834e6b5317c Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Wed, 10 Jan 2024 17:24:10 +0100 Subject: [PATCH 08/12] Rename prime tower enabled -> mode in profiles --- resources/setting_visibility/advanced.cfg | 2 +- resources/setting_visibility/basic.cfg | 2 +- resources/setting_visibility/expert.cfg | 3 ++- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/resources/setting_visibility/advanced.cfg b/resources/setting_visibility/advanced.cfg index c3451d2c98..1b59302c4d 100644 --- a/resources/setting_visibility/advanced.cfg +++ b/resources/setting_visibility/advanced.cfg @@ -127,7 +127,7 @@ brim_line_count brim_outside_only [dual] -prime_tower_enable +prime_tower_mode prime_tower_position_x prime_tower_position_y prime_tower_brim_enable diff --git a/resources/setting_visibility/basic.cfg b/resources/setting_visibility/basic.cfg index 0193eb26ba..f5552f3cd8 100644 --- a/resources/setting_visibility/basic.cfg +++ b/resources/setting_visibility/basic.cfg @@ -53,7 +53,7 @@ adhesion_type adhesion_extruder_nr [dual] -prime_tower_enable +prime_tower_mode prime_tower_position_x prime_tower_position_y diff --git a/resources/setting_visibility/expert.cfg b/resources/setting_visibility/expert.cfg index ab0d2aa920..5a9b9bd585 100644 --- a/resources/setting_visibility/expert.cfg +++ b/resources/setting_visibility/expert.cfg @@ -356,7 +356,7 @@ raft_fan_speed raft_is_shrink_plate [dual] -prime_tower_enable +prime_tower_mode prime_tower_size prime_tower_min_volume prime_tower_position_x @@ -367,6 +367,7 @@ prime_tower_base_size prime_tower_base_height prime_tower_base_curve_magnitude prime_tower_raft_base_line_spacing +prime_tower_max_bridging_distance ooze_shield_enabled ooze_shield_angle ooze_shield_dist From a4137676af257ab391a7102f0c01c2716e439e57 Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Mon, 15 Jan 2024 09:56:14 +0100 Subject: [PATCH 09/12] Settings name consistency --- resources/definitions/fdmprinter.def.json | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index bc25ce590c..1f348f2828 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -6789,8 +6789,8 @@ "options": { "none": "None", - "optimized_consistent": "Bucket", - "optimized": "Sparse" + "bucket": "Bucket", + "sparse": "Sparse" }, "default_value": "none", "enabled": "extruders_enabled_count > 1", @@ -6835,7 +6835,7 @@ "default_value": 5, "minimum_value": "line_width", "maximum_value_warning": "10.0", - "enabled": "resolveOrValue('prime_tower_mode') == 'optimized' or resolveOrValue('prime_tower_mode') == 'optimized_consistent'", + "enabled": "resolveOrValue('prime_tower_mode') == 'sparse' or resolveOrValue('prime_tower_mode') == 'bucket'", "settable_per_mesh": false, "settable_per_extruder": true }, From 335a54c6d1c432e64784f95c69e77125bd0d57f1 Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Fri, 9 Feb 2024 11:27:54 +0100 Subject: [PATCH 10/12] Enable prime tower mode according to materials types --- .../XmlMaterialProfile/XmlMaterialProfile.py | 9 ++++--- resources/definitions/fdmprinter.def.json | 26 +++++++++++++++---- 2 files changed, 27 insertions(+), 8 deletions(-) diff --git a/plugins/XmlMaterialProfile/XmlMaterialProfile.py b/plugins/XmlMaterialProfile/XmlMaterialProfile.py index 490d704d19..0eede82d2f 100644 --- a/plugins/XmlMaterialProfile/XmlMaterialProfile.py +++ b/plugins/XmlMaterialProfile/XmlMaterialProfile.py @@ -579,8 +579,9 @@ class XmlMaterialProfile(InstanceContainer): meta_data[tag_name] = entry.text - if tag_name in self.__material_metadata_setting_map: - common_setting_values[self.__material_metadata_setting_map[tag_name]] = entry.text + for tag_name, value in meta_data.items(): + if tag_name in self.__material_metadata_setting_map: + common_setting_values[self.__material_metadata_setting_map[tag_name]] = value if "description" not in meta_data: meta_data["description"] = "" @@ -1222,7 +1223,9 @@ class XmlMaterialProfile(InstanceContainer): "diameter": "material_diameter" } __material_metadata_setting_map = { - "GUID": "material_guid" + "GUID": "material_guid", + "material": "material_type", + "brand": "material_brand", } # Map of recognised namespaces with a proper prefix. diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index a66c623826..b821f3d6c6 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -76,6 +76,22 @@ "type": "str", "enabled": false }, + "material_type": + { + "label": "Material Type", + "description": "The type of material used.", + "default_value": "", + "type": "str", + "enabled": false + }, + "material_brand": + { + "label": "Material Brand", + "description": "The brand of material used.", + "default_value": "", + "type": "str", + "enabled": false + }, "material_diameter": { "label": "Diameter", @@ -6769,14 +6785,14 @@ "prime_tower_mode": { "label": "Prime Tower", - "description": "Print a tower next to the model, which serves to prime the material after each nozzle switch.
  • None: do not generate a prime tower
  • Bucket: generate a bucket in which secondary materials are primed
  • Sparse: generate a prime tower as sparse as possible. This will save time and filament, but is only possible if the used materials adhere to each other.
", + "description": "Print a tower next to the model, which serves to prime the material after each nozzle switch.
  • None: do not generate a prime tower
  • Normal: generate a bucket in which secondary materials are primed
  • Interleaved: generate a prime tower as sparse as possible. This will save time and filament, but is only possible if the used materials adhere to each other.
", "type": "enum", - "value": "'optimized' if all(material_type == extruderValues('material_type')[0] for material_type in extruderValues('material_type')) else 'optimized_consistent'", + "value": "'none' if (extruders_enabled_count < 2) else ('interleaved' if (all(material_type_var == extruderValues('material_type')[0] for material_type_var in extruderValues('material_type')) and all(material_brand_var == extruderValues('material_brand')[0] for material_brand_var in extruderValues('material_brand'))) else 'normal')", "options": { "none": "None", - "bucket": "Bucket", - "sparse": "Sparse" + "normal": "Normal", + "interleaved": "Interleaved" }, "default_value": "none", "enabled": "extruders_enabled_count > 1", @@ -6821,7 +6837,7 @@ "default_value": 5, "minimum_value": "line_width", "maximum_value_warning": "10.0", - "enabled": "resolveOrValue('prime_tower_mode') == 'sparse' or resolveOrValue('prime_tower_mode') == 'bucket'", + "enabled": "resolveOrValue('prime_tower_mode') != 'none'", "settable_per_mesh": false, "settable_per_extruder": true }, From 5a291f9ba9e83c85d1bdfe1c0e907e0df8154f6f Mon Sep 17 00:00:00 2001 From: Erwan MATHIEU Date: Fri, 16 Feb 2024 09:04:48 +0100 Subject: [PATCH 11/12] Change prime_tower_enable to prime_tower_mode in all defs/profiles --- plugins/LegacyProfileReader/DictionaryOfDoom.json | 2 +- resources/definitions/atmat_signal_pro_base.def.json | 2 +- resources/definitions/deltacomb_dc20flux.def.json | 2 +- resources/definitions/deltacomb_dc21flux.def.json | 2 +- resources/definitions/deltacomb_dc30flux.def.json | 2 +- resources/definitions/dxu_dual.def.json | 2 +- resources/definitions/elegoo_neptune_2D.def.json | 2 +- resources/definitions/leapfrog_bolt_pro.def.json | 2 +- resources/definitions/lotmaxx_sc60.def.json | 2 +- resources/definitions/strateo3d_IDEX420.def.json | 2 +- resources/definitions/ultimaker3.def.json | 2 +- resources/definitions/ultimaker_method_base.def.json | 2 +- resources/definitions/ultimaker_s3.def.json | 2 +- resources/definitions/ultimaker_s5.def.json | 2 +- .../Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg | 2 +- .../quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg | 2 +- .../pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg | 2 +- .../pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg | 2 +- .../pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg | 2 +- .../pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg | 2 +- .../pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg | 2 +- .../pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg | 2 +- .../pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg | 2 +- .../nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg | 2 +- .../nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg | 2 +- .../nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg | 2 +- .../nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg | 2 +- .../quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg | 2 +- .../quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg | 2 +- .../quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg | 2 +- .../gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg | 2 +- resources/quality/nps/nps_ABS_B.inst.cfg | 2 +- resources/quality/nps/nps_ABS_C.inst.cfg | 2 +- resources/quality/nps/nps_PC_A.inst.cfg | 2 +- resources/quality/nps/nps_PC_B.inst.cfg | 2 +- resources/quality/nps/nps_PC_C.inst.cfg | 2 +- resources/quality/nps/nps_PETG_A.inst.cfg | 2 +- resources/quality/nps/nps_PETG_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg | 2 +- resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg | 2 +- .../strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg | 2 +- .../strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg | 2 +- .../quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg | 2 +- .../Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg | 2 +- .../Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg | 2 +- .../tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg | 2 +- .../tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg | 2 +- .../tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg | 2 +- .../tizyx_evy_dual_global_Normal_Quality.inst.cfg | 2 +- .../tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg | 2 +- .../ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg | 2 +- .../quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg | 2 +- .../ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg | 2 +- .../ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg | 2 +- .../quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg | 2 +- resources/variants/liquid/liquid_vo08.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_standard_04.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_standard_06.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_standard_08.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_standard_10.inst.cfg | 2 +- resources/variants/strateo3d/strateo3d_standard_12.inst.cfg | 2 +- resources/variants/ultimaker3_aa0.8.inst.cfg | 2 +- resources/variants/ultimaker3_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker3_extended_aa0.8.inst.cfg | 2 +- resources/variants/ultimaker3_extended_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker_s3_aa0.8.inst.cfg | 2 +- resources/variants/ultimaker_s3_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker_s5_aa0.8.inst.cfg | 2 +- resources/variants/ultimaker_s5_bb0.8.inst.cfg | 2 +- resources/variants/ultimaker_s7_aa0.8.inst.cfg | 2 +- resources/variants/ultimaker_s7_bb0.8.inst.cfg | 2 +- 628 files changed, 628 insertions(+), 628 deletions(-) diff --git a/plugins/LegacyProfileReader/DictionaryOfDoom.json b/plugins/LegacyProfileReader/DictionaryOfDoom.json index f65cc271d1..90e973b779 100644 --- a/plugins/LegacyProfileReader/DictionaryOfDoom.json +++ b/plugins/LegacyProfileReader/DictionaryOfDoom.json @@ -68,7 +68,7 @@ "meshfix_keep_open_polygons": "fix_horrible_use_open_bits", "magic_mesh_surface_mode": "\"surface\" if simple_mode else \"normal\"", "magic_spiralize": "spiralize", - "prime_tower_enable": "wipe_tower", + "prime_tower_mode": "\"normal\" if wipe_tower else \"none\"", "prime_tower_size": "math.sqrt(float(wipe_tower_volume) / float(layer_height))", "ooze_shield_enabled": "ooze_shield", "skin_overlap": "fill_overlap" diff --git a/resources/definitions/atmat_signal_pro_base.def.json b/resources/definitions/atmat_signal_pro_base.def.json index cd59e1c169..83af53fb3c 100644 --- a/resources/definitions/atmat_signal_pro_base.def.json +++ b/resources/definitions/atmat_signal_pro_base.def.json @@ -110,7 +110,7 @@ "min_infill_area": { "value": "5.0" }, "minimum_polygon_circumference": { "value": "0.2" }, "optimize_wall_printing_order": { "value": "True" }, - "prime_tower_enable": { "value": "True" }, + "prime_tower_mode": { "value": "normal" }, "retraction_amount": { "value": "1" }, "retraction_combing": { "value": "'noskin'" }, "retraction_combing_max_distance": { "value": "10" }, diff --git a/resources/definitions/deltacomb_dc20flux.def.json b/resources/definitions/deltacomb_dc20flux.def.json index f81909dae5..cc4a38c4d5 100644 --- a/resources/definitions/deltacomb_dc20flux.def.json +++ b/resources/definitions/deltacomb_dc20flux.def.json @@ -31,7 +31,7 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_enable": { "value": true }, + "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": "50" }, "switch_extruder_retraction_amount": { "value": "0" } } diff --git a/resources/definitions/deltacomb_dc21flux.def.json b/resources/definitions/deltacomb_dc21flux.def.json index dbcdf3ad37..dd710af627 100644 --- a/resources/definitions/deltacomb_dc21flux.def.json +++ b/resources/definitions/deltacomb_dc21flux.def.json @@ -31,7 +31,7 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_enable": { "value": true }, + "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": "50" }, "switch_extruder_retraction_amount": { "value": "0" } } diff --git a/resources/definitions/deltacomb_dc30flux.def.json b/resources/definitions/deltacomb_dc30flux.def.json index 4a42ae4d63..789af29650 100644 --- a/resources/definitions/deltacomb_dc30flux.def.json +++ b/resources/definitions/deltacomb_dc30flux.def.json @@ -31,7 +31,7 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_enable": { "value": "1" }, + "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": "50" }, "switch_extruder_retraction_amount": { "value": "0" } } diff --git a/resources/definitions/dxu_dual.def.json b/resources/definitions/dxu_dual.def.json index 6d30af005f..8fb2092b65 100644 --- a/resources/definitions/dxu_dual.def.json +++ b/resources/definitions/dxu_dual.def.json @@ -6,6 +6,6 @@ { "machine_end_gcode": { "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\"" }, "machine_start_gcode": { "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \";material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nM104 T0 S{material_standby_temperature, 0}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 ;home all\\nT1 ; move to the nozzle 2\\nG0 Z20 F2400 ;move the platform to 30mm\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0 ;prime distance\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500 ; retract\\nT0 ; move to the nozzle 1\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM109 T0 S{material_print_temperature_layer_0, 0}\\nG0 X210 Y20 F7200\\nG92 E0\\nG92 E-7.0\\nG1 E0 F45 ;purge nozzle\\nG1 E-6.5 F1500\\nM104 T0 S{material_standby_temperature, 0}\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nM400 ;finish all moves\\nG1 E0 F1500\\nG92 E0\\n;end of startup sequence\\n\"" }, - "prime_tower_enable": { "default_value": true } + "prime_tower_mode": { "default_value": "normal" } } } \ No newline at end of file diff --git a/resources/definitions/elegoo_neptune_2D.def.json b/resources/definitions/elegoo_neptune_2D.def.json index c9aa5a0184..e564acc036 100644 --- a/resources/definitions/elegoo_neptune_2D.def.json +++ b/resources/definitions/elegoo_neptune_2D.def.json @@ -55,7 +55,7 @@ "settable_per_extruder": false }, "prime_blob_enable": { "default_value": false }, - "prime_tower_enable": { "default_value": true }, + "prime_tower_mode": { "default_value": "normal" }, "prime_tower_min_volume": { "default_value": 90 }, "prime_tower_size": { "default_value": 30 }, "raft_airgap": { "default_value": 0.25 }, diff --git a/resources/definitions/leapfrog_bolt_pro.def.json b/resources/definitions/leapfrog_bolt_pro.def.json index e4a13217e5..449967072f 100644 --- a/resources/definitions/leapfrog_bolt_pro.def.json +++ b/resources/definitions/leapfrog_bolt_pro.def.json @@ -80,7 +80,7 @@ "material_final_print_temperature": { "value": "default_material_print_temperature" }, "material_initial_print_temperature": { "value": "default_material_print_temperature" }, "material_standby_temperature": { "enabled": false }, - "prime_tower_enable": { "resolve": "extruders_enabled_count > 1" }, + "prime_tower_mode": { "resolve": "'normal' if extruders_enabled_count > 1 else 'none'" }, "retraction_amount": { "default_value": 2 }, "retraction_combing": { "value": "'all'" }, "skirt_line_count": { "default_value": 3 }, diff --git a/resources/definitions/lotmaxx_sc60.def.json b/resources/definitions/lotmaxx_sc60.def.json index f4ce358be1..697dd911b6 100644 --- a/resources/definitions/lotmaxx_sc60.def.json +++ b/resources/definitions/lotmaxx_sc60.def.json @@ -44,7 +44,7 @@ "machine_width": { "default_value": 235 }, "meshfix_maximum_resolution": { "value": 0.25 }, "optimize_wall_printing_order": { "value": true }, - "prime_tower_enable": { "value": true }, + "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": 30 }, "retract_at_layer_change": { "value": false }, "retraction_amount": { "value": 4.5 }, diff --git a/resources/definitions/strateo3d_IDEX420.def.json b/resources/definitions/strateo3d_IDEX420.def.json index d4236c126e..66ecb9999c 100644 --- a/resources/definitions/strateo3d_IDEX420.def.json +++ b/resources/definitions/strateo3d_IDEX420.def.json @@ -112,7 +112,7 @@ "machine_use_extruder_offset_to_offset_coords": { "default_value": false }, "machine_width": { "default_value": 420 }, "material_diameter": { "default_value": 1.75 }, - "prime_tower_enable": { "default_value": true }, + "prime_tower_mode": { "default_value": "normal" }, "prime_tower_min_volume": { "default_value": 35.6 }, "raft_acceleration": { "value": "machine_acceleration" }, "raft_base_acceleration": { "value": "machine_acceleration" }, diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 19df92c08d..0404e98b1d 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -149,7 +149,7 @@ "enabled": true, "value": "resolveOrValue('print_sequence') != 'one_at_a_time'" }, - "prime_tower_enable": { "default_value": true }, + "prime_tower_mode": { "default_value": "normal" }, "prime_tower_position_x": { "value": "185" }, "prime_tower_wipe_enabled": { "default_value": false }, "retraction_amount": { "value": "6.5" }, diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json index 1ceb05a43a..89aaa1b170 100644 --- a/resources/definitions/ultimaker_method_base.def.json +++ b/resources/definitions/ultimaker_method_base.def.json @@ -346,7 +346,7 @@ "prime_tower_base_curve_magnitude": { "value": 2 }, "prime_tower_base_height": { "value": 6 }, "prime_tower_base_size": { "value": 10 }, - "prime_tower_enable": { "value": false }, + "prime_tower_mode": { "value": "none" }, "prime_tower_flow": { "value": "material_flow" }, "prime_tower_line_width": { "value": 1 }, "prime_tower_raft_base_line_spacing": { "value": "raft_base_line_width" }, diff --git a/resources/definitions/ultimaker_s3.def.json b/resources/definitions/ultimaker_s3.def.json index add1782368..d893c16f4e 100644 --- a/resources/definitions/ultimaker_s3.def.json +++ b/resources/definitions/ultimaker_s3.def.json @@ -103,7 +103,7 @@ "default_value": false, "enabled": true }, - "prime_tower_enable": { "value": "True" }, + "prime_tower_mode": { "value": "normal" }, "retraction_amount": { "value": "6.5" }, "retraction_hop": { "value": "2" }, "retraction_hop_enabled": { "value": "extruders_enabled_count > 1" }, diff --git a/resources/definitions/ultimaker_s5.def.json b/resources/definitions/ultimaker_s5.def.json index ec82e6b630..b9eba0952b 100644 --- a/resources/definitions/ultimaker_s5.def.json +++ b/resources/definitions/ultimaker_s5.def.json @@ -104,7 +104,7 @@ "default_value": false, "enabled": true }, - "prime_tower_enable": { "value": "True" }, + "prime_tower_mode": { "value": "normal" }, "retraction_amount": { "value": "6.5" }, "retraction_combing": { "value": "'no_outer_surfaces'" }, "retraction_hop": { "value": "2" }, diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg index f4da80ded9..bab34c73b6 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg @@ -38,7 +38,7 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_min_volume = 6 prime_tower_size = 20 prime_tower_wipe_enabled = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg index a052562cd3..e0ef960b32 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg @@ -38,7 +38,7 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_min_volume = 6 prime_tower_size = 20 prime_tower_wipe_enabled = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg index 145cd34ead..55c26edccb 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg @@ -36,7 +36,7 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_min_volume = 6 prime_tower_size = 20 prime_tower_wipe_enabled = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg index e6e2cb78a0..b5fa497a33 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg @@ -36,7 +36,7 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_min_volume = 6 prime_tower_size = 20 prime_tower_wipe_enabled = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg index 56587fe883..1bf050b6f2 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg @@ -35,7 +35,7 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_min_volume = 6 prime_tower_size = 20 prime_tower_wipe_enabled = True diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg index 10353f6110..7cde446656 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg @@ -35,7 +35,7 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_min_volume = 6 prime_tower_size = 20 prime_tower_wipe_enabled = True diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg index 33b5c2c111..2e0d11b6eb 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_A.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg index 5be0dc9527..fc487f97e4 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_B.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg index 76aa867f8f..3eef71ef41 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg index 20bb125cd9..35534c090e 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg index cc0224cf23..d61061ff55 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.40_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg index ec2ebdc647..df09da8d68 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg index 136ec93d16..be38167856 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg index 3a0a94782c..24299680ad 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg index 719a4bdcbd..2c89d60680 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_DBE0.60_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = DBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg index 4486a1d3bc..c3cbb96ae7 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_A.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg index b938502e85..5e062678c3 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_B.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg index 3b88ca6b67..b9651ddf53 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg index 4134717770..3e36641037 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg index e267e7c6eb..bdb9ca3ce5 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.40_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.40mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg index 35e2e07b41..741e6c613a 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_C.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg index dd944cbfd1..c8421e34a5 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg index 8aa462e206..39bafd45c6 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg index 0691a01deb..c73c5baecd 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_FBE0.60_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg index a4d0582c3a..b9f63dff35 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg index 831e17c018..86e03b328c 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg index d9a57d6012..b51b54cb62 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg index 8408fbc014..82ad7d5d49 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VDBE0.80_PVA_G.inst.cfg @@ -13,7 +13,7 @@ variant = V-DBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg index 18c813a79a..dcc7dfcd48 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_D.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg index 660c536a5e..d0fb6ec6e2 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_E.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.60mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg index 5dbea58c49..1817111e2a 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_F.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg index 9bfd649e99..8ba8f905d6 100644 --- a/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg +++ b/resources/quality/deltacomb/PVA/deltacomb_VFBE0.80_PVA_G.inst.cfg @@ -13,7 +13,7 @@ variant = V-FBE 0.80mm [values] brim_replaces_support = False material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none support_bottom_distance = =support_z_distance support_bottom_stair_step_height = 0 support_bottom_stair_step_width = 0 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg index d5a2f73729..82cfb879dd 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.10.inst.cfg @@ -13,7 +13,7 @@ variant = 0.40mm_Elegoo_Nozzle [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 10 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg index e86f454664..3b8cc5bb5f 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.15.inst.cfg @@ -13,7 +13,7 @@ variant = 0.40mm_Elegoo_Nozzle [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg index db7e5a43c7..23e6730f11 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.20.inst.cfg @@ -17,7 +17,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg index d84cc9e656..f305930448 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_40/elegoo_pla_nozzle_0.40_layer_0.30.inst.cfg @@ -20,7 +20,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed skin_overlap = 20 diff --git a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg index b6c63fad0f..cfc8fb9b32 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.30.inst.cfg @@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg index 1e3eec080a..52ebc5566b 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.40.inst.cfg @@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg index 09bc57ffea..683bfe317a 100644 --- a/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg +++ b/resources/quality/elegoo/base/pla/nozzle_0_80/elegoo_pla_nozzle_0.80_layer_0.60.inst.cfg @@ -15,7 +15,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg index 66eb9f49c0..40cc88859a 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.10.inst.cfg @@ -11,7 +11,7 @@ type = quality variant = 0.40mm_Elegoo_Nozzle [values] -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 skin_overlap = 10 speed_topbottom = =math.ceil(speed_print * 35 / 70) diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg index 209ce52fa2..6043a569d0 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.15.inst.cfg @@ -11,7 +11,7 @@ type = quality variant = 0.40mm_Elegoo_Nozzle [values] -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 45 / 70) diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg index 9805a1ae5a..3076011555 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.20.inst.cfg @@ -12,7 +12,7 @@ variant = 0.40mm_Elegoo_Nozzle [values] infill_sparse_density = 15 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 skin_overlap = 20 top_bottom_thickness = 0.8 diff --git a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg index cb6ca323e6..562b84bf02 100644 --- a/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg +++ b/resources/quality/elegoo/neptune_4/pla/nozzle_0_40/elegoo_n4_pla_nozzle_0.40_layer_0.30.inst.cfg @@ -14,7 +14,7 @@ variant = 0.40mm_Elegoo_Nozzle infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' infill_sparse_density = 15 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 skin_overlap = 20 top_bottom_thickness = 0.9 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg index d9f0a0aaea..7178468de7 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg @@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg index 620622e555..cb966418ec 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_thick.inst.cfg @@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg index 05eeb68305..23733ea85e 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_thin.inst.cfg @@ -30,7 +30,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg index b63ef09a6b..01577a46d0 100644 --- a/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_global_dual_very_thick.inst.cfg @@ -29,7 +29,7 @@ material_standby_temperature = =material_print_temperature - 10 ooze_shield_angle = 20 ooze_shield_dist = 4 ooze_shield_enabled = True -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 0.75 retraction_combing = off retraction_speed = 70 diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg index 038affd56f..dc279c6232 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 20 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_infill = =math.ceil(speed_print * 50 / 60) speed_layer_0 = =math.ceil(speed_print * 20 / 60) diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg index 5091d36813..d5684e3ccb 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_Fast_Print.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 45 / 60) speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg index 0420284fa8..bd43496eb4 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_High_Quality.inst.cfg @@ -19,7 +19,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 40 / 50) speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg index 927bdbe7b9..420b8a9d9c 100644 --- a/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_ABS_Normal_Quality.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_initial_print_temperature = =material_print_temperature - 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 40 / 55) speed_layer_0 = =math.ceil(speed_print * 20 / 55) speed_print = 55 diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg index 02d1292c17..ec682feabd 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_Draft_Print.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg index b1c540d01e..591e6e2964 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_Fast_Print.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg index 6aac1f4972..604e491db3 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_High_Quality.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 10 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg index e831dfb254..e610dcf495 100644 --- a/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PC_Normal_Quality.inst.cfg @@ -34,7 +34,7 @@ material_initial_print_temperature = =material_print_temperature - 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 raft_interface_thickness = =max(layer_height * 1.5, 0.225) diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg index 6e0ac10718..37d77be67c 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_print = 70 diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg index 5e84c3e1a1..f27381d0e3 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg index 8974dcbb03..1c49689b2a 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_High_Quality.inst.cfg @@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg index cbada0be18..82b3f109f4 100644 --- a/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PETG_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg index 70817b06e3..e6e18da492 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_layer_0 = =math.ceil(speed_print * 20 / 70) speed_print = 70 diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg index b6991202b2..50b8662604 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_Fast_Print.inst.cfg @@ -20,7 +20,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none speed_layer_0 = =math.ceil(speed_print * 20 / 60) speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg index 930f5cf3fd..baf7af3fdc 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_High_Quality.inst.cfg @@ -22,7 +22,7 @@ machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 50) speed_print = 50 diff --git a/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg index 6595446fee..bf5fb6b1c9 100644 --- a/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PLA_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ layer_height_0 = 0.2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_standby_temperature = 100 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_layer_0 = =math.ceil(speed_print * 20 / 70) top_bottom_thickness = 1 diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg index 1904758532..86216145d9 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Draft_Print.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 5 material_print_temperature_layer_0 = =material_print_temperature + 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg index 2a0a5729ec..7d4abe2d3f 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Fast_Print.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 13 material_print_temperature_layer_0 = =material_print_temperature + 3 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg index 304c4f17f0..3aace2ea38 100644 --- a/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.4_PP_Normal_Quality.inst.cfg @@ -36,7 +36,7 @@ material_print_temperature = =default_material_print_temperature - 15 material_print_temperature_layer_0 = =material_print_temperature + 3 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg index bc712bf999..04b769ec81 100644 --- a/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PETG_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg index c51c068ae2..5f7216e9b8 100644 --- a/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PETG_Fast_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg index 3b6749dfb9..0f4b43d1ad 100644 --- a/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PLA_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg index 45418e5994..bf262d9b0d 100644 --- a/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.6_PLA_Fast_Print.inst.cfg @@ -26,7 +26,7 @@ material_final_print_temperature = =max(-273.15, material_print_temperature - 15 material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg index 90424ee65e..6f15ddf686 100644 --- a/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_CPE_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ jerk_travel = 20 line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 15 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg index 7857ed00e7..e56ee10a98 100644 --- a/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_CPE_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ jerk_travel = 20 line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 20 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing_max_distance = 50 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg index 4194c6f3b7..c8c93a744f 100644 --- a/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_CPE_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ jerk_travel = 20 line_width = =machine_nozzle_size * 0.875 material_print_temperature = =default_material_print_temperature + 17 material_standby_temperature = 100 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing_max_distance = 50 speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg index 87dd876588..70db87df10 100644 --- a/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Draft_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg index 891a20540d..a134533c46 100644 --- a/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Superdraft_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) diff --git a/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg index e009094760..d8c5450478 100644 --- a/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_Nylon_Verydraft_Print.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_standby_temperature = 100 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_acceleration = =acceleration_layer_0 raft_airgap = =round(layer_height_0 * 0.85, 2) raft_interface_thickness = =round(machine_nozzle_size * 0.3 / 0.4, 2) diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg index 947c042b8c..f941d5a55d 100644 --- a/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PETG_Draft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg index 08cb14cb26..d96bf8d17e 100644 --- a/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PETG_Superdraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal raft_margin = 10 retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg index 187ed1f212..53142e5348 100644 --- a/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PETG_Verydraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg index 10b6e8185a..5a4cb62ee2 100644 --- a/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PLA_Draft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg index ed0fc7fd8a..4168b05c61 100644 --- a/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PLA_Superdraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal raft_margin = 10 retract_at_layer_change = False speed_print = 45 diff --git a/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg index 9def9ecb97..af930c749a 100644 --- a/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PLA_Verydraft_Print.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.6 material_final_print_temperature = =max(-273.15, material_print_temperature - 15) material_initial_print_temperature = =max(-273.15, material_print_temperature - 10) material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg index 4c3f60a240..d30007f18d 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg @@ -26,7 +26,7 @@ material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 retract_at_layer_change = False diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg index 1b7c05ac3c..a0a1f806ab 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg @@ -26,7 +26,7 @@ material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 retract_at_layer_change = False diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg index 7cbb60c3aa..cdadd228be 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg @@ -25,7 +25,7 @@ material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 retract_at_layer_change = False diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg index 4994e3f9f4..31baf4022c 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg @@ -30,7 +30,7 @@ material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature + 19 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retract_at_layer_change = False retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg index fd15d041b8..408ad54518 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg @@ -31,7 +31,7 @@ material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =material_print_temperature + 15 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retract_at_layer_change = False retraction_count_max = 12 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg index 5c88fb165f..9fd95f5c32 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg @@ -30,7 +30,7 @@ material_initial_print_temperature = =material_print_temperature material_print_temperature_layer_0 = =material_print_temperature + 17 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retract_at_layer_change = False retraction_count_max = 12 diff --git a/resources/quality/nps/nps_ABS_B.inst.cfg b/resources/quality/nps/nps_ABS_B.inst.cfg index 3f700405bd..520bda4b05 100644 --- a/resources/quality/nps/nps_ABS_B.inst.cfg +++ b/resources/quality/nps/nps_ABS_B.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 100 material_flow = 96 material_print_temperature = =default_material_print_temperature + 13 material_print_temperature_layer_0 = =243 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_ABS_C.inst.cfg b/resources/quality/nps/nps_ABS_C.inst.cfg index 6138e4004c..1131f61d36 100644 --- a/resources/quality/nps/nps_ABS_C.inst.cfg +++ b/resources/quality/nps/nps_ABS_C.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 100 material_flow = 91 material_print_temperature = =default_material_print_temperature + 15 material_print_temperature_layer_0 = =245 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PC_A.inst.cfg b/resources/quality/nps/nps_PC_A.inst.cfg index 8665f8ceae..90cc71d951 100644 --- a/resources/quality/nps/nps_PC_A.inst.cfg +++ b/resources/quality/nps/nps_PC_A.inst.cfg @@ -32,7 +32,7 @@ material_bed_temperature = 110 material_flow = 100 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =280 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PC_B.inst.cfg b/resources/quality/nps/nps_PC_B.inst.cfg index 9ccb5cea53..3761d802d7 100644 --- a/resources/quality/nps/nps_PC_B.inst.cfg +++ b/resources/quality/nps/nps_PC_B.inst.cfg @@ -32,7 +32,7 @@ material_bed_temperature = 110 material_flow = 88 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PC_C.inst.cfg b/resources/quality/nps/nps_PC_C.inst.cfg index 30267d4237..85752e78c2 100644 --- a/resources/quality/nps/nps_PC_C.inst.cfg +++ b/resources/quality/nps/nps_PC_C.inst.cfg @@ -32,7 +32,7 @@ material_bed_temperature = 110 material_flow = 88 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PETG_A.inst.cfg b/resources/quality/nps/nps_PETG_A.inst.cfg index 3cae430f1c..0985dd1b3a 100644 --- a/resources/quality/nps/nps_PETG_A.inst.cfg +++ b/resources/quality/nps/nps_PETG_A.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 80 material_flow = 98 material_print_temperature = =default_material_print_temperature + 20 material_print_temperature_layer_0 = =230 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/nps/nps_PETG_B.inst.cfg b/resources/quality/nps/nps_PETG_B.inst.cfg index 5860f65414..e3a5f165ad 100644 --- a/resources/quality/nps/nps_PETG_B.inst.cfg +++ b/resources/quality/nps/nps_PETG_B.inst.cfg @@ -22,7 +22,7 @@ material_bed_temperature = 80 material_flow = 95 material_print_temperature = =default_material_print_temperature + 20 material_print_temperature_layer_0 = =230 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg index 39ba32a332..0569a356f3 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg index dd0d167e6b..e906508f7f 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg index f894a7dc13..a883aba2ec 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg index 7642489c2a..dc595e8c5d 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg index bf5c18405b..a84b12135f 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg index 6756384e4a..ef6358a6a0 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature +3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg index 978484d813..7a0cd7ee8d 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg index bcec4fe68f..4fa5d070aa 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 0 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg index 85f79ebe7a..7944c44371 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ACETATE_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg index 9b29e49624..fb2ee81c9f 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg index 07a46f0d05..4e63f1513d 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg index 60410d8d34..5e158007ab 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg index 9304630630..f73adbfa51 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg index d39d91c91a..da2aa05237 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg index e716824cf0..e636a5ebee 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg index bd964bed2a..a997ac74dd 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg index cd27f77737..7055e3dadd 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg index 78191af7be..6c66ffd76c 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg index f37a3b4d6d..f451618a28 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_A.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 260 material_print_temperature_layer_0 = 265 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg index 75fed99b1e..5866dad50b 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_B.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg index 51911c3811..502dd8be07 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PC_C.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg index e4596d9def..5279228105 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PEKK_B.inst.cfg @@ -33,7 +33,7 @@ material_flow = 105 material_flow_layer_0 = 120 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg index d0faf6eb66..92c62d2b43 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg index 3a64a52254..92811521ac 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg index debf74ed0d..234d33c2eb 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg index 990d5cf645..76ea2997ba 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg index 82f26cd66d..fc3d8e47ec 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg index a91b035e38..f4bfb4c698 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg index c7194e18d2..82715060a6 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_A.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 10 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg index 078e213a26..ca19b0ee14 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_B.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg index bfb4c46c46..f61b83ab7b 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_PLA_HT_C.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg index 8dd1c17ea6..85097b4506 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 107 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature - 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg index cca98aa599..967f7c21a5 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 103 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg index 5a343d6893..9110650629 100644 --- a/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/HT0_4/s3d_ht0.4_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 101 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg index e6be881341..de6356694f 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg index c4342c149a..ec119cba9f 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg index e3581e0823..0b4df9f3a3 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg index 4c451894bd..ad5d8c8586 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg index 65c2c9e81f..e0600e72d8 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg index 2f5cf9cfa3..5827b15cf9 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature +3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg index 36d6697edb..3ee7204b92 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg index e92561350a..4834ca9eef 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 0 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg index e61775fde0..4850f68dc0 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ACETATE_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg index 020b95dad2..ec7cbcc0fd 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg index 6688d82ec8..6f086f0605 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg index 2c8d6a82d3..ff5016d543 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg index fe012ff873..e324931269 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg index c0adce0f84..5aea3605f5 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg index 5b58c2f37b..24a1faed48 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_BVOH_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg index f986831fd5..d73b6ac796 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg index 5d360b244b..14d3867950 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg index 3875e668f4..26e6ebc4df 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg index d4d0e1c17e..54954ff567 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg index f2bb237ea2..057fb1b8cc 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg index f6780fbded..63f71cff82 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg index 6e726932a6..afef00df11 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg index 7ef50ff5b1..7b81803b0c 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg index 4d4af1e0f7..c0ac99423d 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6CF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg index 0d88c99c85..bd0f177b1b 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_A.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg index de476e6e46..586d49b7db 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg index 3fe7ff347c..16c8c5e6aa 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PA6GF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg index 9dd3039b65..71a70f0849 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_A.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 260 material_print_temperature_layer_0 = 265 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg index 346f33bafb..ad26bba4cb 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_B.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg index 8571e8c4b0..e4da72d39a 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PC_C.inst.cfg @@ -34,7 +34,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 88 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg index 4231e1b3a1..b7bebe13b7 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg index c141a0ab07..f3bc48c8c9 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg index 9cd4262c55..70c2d3044c 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg index 6f49ec9e3b..d52ceb51ea 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 98 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg index 415379417c..6124b1dfed 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg index c4ce86563f..b4a8bc21f4 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg index dc4505591f..a764026ca7 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_A.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 10 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg index 224fa18cd6..11b9d689c8 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_B.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg index 44737981b0..7521ef5d62 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PLA_HT_C.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg index 8bf71b5cf5..6de69d4eba 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg index 3102afdc2c..e2b282ab2a 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg index ad6e361582..60d02fac6d 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-M_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg index b7445aee86..4969aad456 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg index cc849df9ba..7bf8dc30d4 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg index 10cbd3a4cf..27cef2d7c9 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_PVA-S_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.4 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg index 055bbb7623..24e3a1f238 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_A.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 107 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature - 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg index 028586beb4..4211634c6d 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 103 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg index 8bc0b97bc5..bd2c12c3f1 100644 --- a/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_4/s3d_std0.4_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.38 material_flow = 101 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg index ec355cec15..589f27a221 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg index 3ab4df020c..bca586491d 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 98 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg index 455cb44a7b..2e90b6fd6f 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 96 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg index 3475c621c3..e2f63845ee 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg index d7d937fdef..bc9df5fa14 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 98 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg index e83067bdc8..7216eb093c 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ABS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg index 188cddf0d6..a90e755a49 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg index 6127c2ec43..1d54fd6b3c 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 0 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg index ca38be0476..90d3d00507 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ACETATE_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 91 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg index caa9003cb3..ca2b4a9c9e 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 101 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg index a10cbdac7d..b297719ba1 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 99 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg index 85fe174e95..34882ab1af 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_ASA-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg index 9b48be1b8b..07969b958a 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg index 0440a0a34a..ecd3384a5b 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg index 7f124ae4ec..a4a87bc3f3 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_BVOH_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg index f662c41048..c0f93168da 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg index dae0dda098..4116205747 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg index 1079c746ec..df1fb6e2e7 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_COPA_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg index 04991249e9..aa5bfa30f2 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg index 685778f3f1..887a35f80e 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg index ab5eca1d47..a9a4bcb18f 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_HIPS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg index a5a2addbc6..d73114c313 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_Nylon-1030_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg index 6ecc9a3265..e3f0657f1f 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg index 9e060959dd..542f9405b1 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg index 322d30a975..43ff676c46 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6CF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg index 5ae6c32cb8..2cca8a5c45 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_B.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg index 3fbe1f6370..951e26d841 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg index 46aacdf22c..f408c5a293 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PA6GF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg index 6997dae536..8b72022a0d 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_B.inst.cfg @@ -33,7 +33,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 87 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg index 70bb7206af..2540f2bea9 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_C.inst.cfg @@ -33,7 +33,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 87 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg index eb89937ded..c6bd8cc70e 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PC_D.inst.cfg @@ -33,7 +33,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 87 material_print_temperature = 270 material_print_temperature_layer_0 = 275 -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 2 retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg index 4bc567a2d9..02b8e45e22 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg index f08c2e68b7..26e2eb5029 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 92 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg index 4a9a1472b8..f97462d99c 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PETG_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg index 41edbc8e32..540e14ba23 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 93 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg index 10356ad344..af851371a1 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 92 material_print_temperature = =default_material_print_temperature + 8 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg index 9f04791ac2..e2470b9ecf 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 91 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg index 56e09ac385..21c4f9eccc 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_B.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg index 6c8a5462aa..b210d0fd30 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_C.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg index be4a045e0d..6b6a5923ce 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PLA_HT_D.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg index 6b107e9c9b..f677ac9e32 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg index ca169572b9..9ed4c381c9 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg index 7e7a3ed9d1..3f928f436d 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-M_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg index a08e251fe0..d8e702dc7a 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg index 2bcf4d4b1d..53516d4617 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg index 1352a75a8a..e7298a71d3 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_PVA-S_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.6 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg index ad699959aa..cd9de526ec 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_B.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.55 material_flow = 105 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature - 2 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg index 6fdabc1a83..4de06235da 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.55 material_flow = 103 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg index 1954931cc7..431623b7c6 100644 --- a/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_6/s3d_std0.6_TPU98A_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.55 material_flow = 101 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.2 retraction_hop_only_when_collides = False retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg index 913af1994b..e0c29062d7 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 1 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg index 573834fc79..9230df64e3 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 96 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg index 3d5d1781ae..7117a889ed 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS-X_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg index 4910a69272..97d2209bda 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg index 28d395019a..111504ad7b 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 96 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 2 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg index b91ceb1f85..d5322c039a 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ABS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg index 4a32ddceaf..74d0fa3869 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg index e45a8970f7..80dfbe8dbc 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 96 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg index c0a9632b95..26decee7ba 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_ASA-X_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg index bce7e2891f..850458ed36 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg index 0a053f123e..06f9ed6686 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg index 4f167ecacc..36398c0cfc 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_BVOH_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg index 8efea7e264..8dd9bc10fb 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop = 2 retraction_hop_enabled = True diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg index d2f6973da7..fb149908d1 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop = 2 retraction_hop_enabled = True diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg index 57e9fc27a4..47d9a50940 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_COPA_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop = 2 retraction_hop_enabled = True diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg index 2ef4a5b479..e57fefc2b9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg index a7549a851c..0cbddce4c9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg index 322f31e986..965c08e8f9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_HIPS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg index 6f3fa578bf..4062997ba0 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg index ee3166e7da..e6acfe27b8 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg index 05eabcc6a3..602837f410 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6CF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg index d10b2df53b..d5bb0ac8ba 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_C.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg index 181d89f957..022a6f36bf 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg index 38bd72884b..35421e68d6 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PA6GF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg index d8b2e660fc..65217b7ff9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_C.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = 280 material_print_temperature_layer_0 = 285 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_speed = 35 diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg index c39338eeca..118acb433f 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_D.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = 280 material_print_temperature_layer_0 = 285 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_speed = 35 diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg index f88eff1615..c8102ecdf9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PC_E.inst.cfg @@ -35,7 +35,7 @@ material_print_temperature = 280 material_print_temperature_layer_0 = 285 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_min_travel = =2*line_width retraction_speed = 35 diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg index 59a6db473d..df178b1807 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg index 9a94498b12..95973a4428 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg index 2611e1deba..32073574ea 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PETG_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 93 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg index 35644e47a8..4b306434b9 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 99 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg index a820dd8467..99a245dfb4 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 98 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg index a4f135a4fa..d7ecb95748 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg index ee58caf9e6..9a973d225d 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_C.inst.cfg @@ -27,7 +27,7 @@ material_flow = 93 material_initial_print_temperature = =default_material_print_temperature material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg index 6399e7fd1f..6ff6a8dd0e 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_D.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg index e034d49e6e..5f19e2ab77 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PLA_HT_E.inst.cfg @@ -29,7 +29,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg index 632c45a51f..5ea81eab76 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg index e882d42015..cc5ecebffe 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg index 7b52c7bb2d..d133a60b41 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-M_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg index a0fcdc4a52..1e243bbea4 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg index 496e5fe215..54889f9923 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg index 9c676c934b..8f484b0616 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_PVA-S_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.8 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg index 0b4c3c0281..f328b88645 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 105 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg index ffbb925a22..9d11111b78 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 103 material_print_temperature = =default_material_print_temperature + 6 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg index 60af5617e3..ed25c0fb46 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU98A_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 101 material_print_temperature = =default_material_print_temperature + 9 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg index 71581b46ad..0b70ff0384 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_C.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg index bcbb45062a..f519ec66d5 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg index 827ae4a7ba..83c109070a 100644 --- a/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_0_8/s3d_std0.8_TPU_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.7 material_flow = 100 material_print_temperature = =default_material_print_temperature + 7 material_print_temperature_layer_0 = =default_material_print_temperature +3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg index 29f88f6e15..09ffbaed98 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg index 316e5d4447..ff50fd3deb 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg index 44203ad144..fbbc7a0187 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ABS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg index e322951476..95a6d4e732 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg index b4ee9ea985..2c0caa6a06 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg index 708896fdb7..c896adef1b 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_ASA-X_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.4 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg index 63ca3d88ff..0dcc4405d7 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg index 62ed1914db..73dce76c2e 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg index ac9ec6324e..36902a619f 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_BVOH_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg index b225d8a911..b0bc012110 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg index 6e859c8dd0..baf4211645 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg index 6b8ebd9d20..754d20c802 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_HIPS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg index f168d4cf46..717aed8e49 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg index 652876d6b2..d41dea9d7b 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg index 482b99c2f6..b708481aeb 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6CF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg index 551e79a8e4..5e604e6f65 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_D.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg index 5709736147..31f7a30f3f 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_E.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg index 38f3b2b2ef..f35389424c 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PA6GF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg index 54a6d54cc0..902e42aef1 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 95 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg index abdd37d98d..f1fc4dd877 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 95 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg index 50f3b04e16..03c73269f8 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PETG_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 95 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg index 35e9d19957..ddf8abc4c1 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg index 6e59384a4d..77eb559e6e 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg index 9df5f69d75..5053e91cbb 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PLA_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 100 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg index 45b5a9e415..0e658a7bd2 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg index 70ec1234ff..f30a55729c 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg index 6327502027..eca2362651 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-M_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg index d7056a3f11..ec460ac49e 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg index a5ec67621f..1e85473f67 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg index 4ddc98ddd2..9650dac1c0 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_PVA-S_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.0 material_flow = 97 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg index 1b3a77ab8b..38cf5927f0 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_D.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.9 material_flow = 107 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg index be45c084a5..60baaa1038 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_E.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.9 material_flow = 107 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg index c02401c4d5..385d21e44d 100644 --- a/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_0_Experimental/s3d_std1.0_TPU98A_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*0.9 material_flow = 107 material_print_temperature = =default_material_print_temperature + 8 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg index ba91c749d5..ef7573779d 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 103 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg index b1d4c72a34..86e4022a27 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 102 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg index 4fac7e687d..aa2af46845 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ABS_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 101 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature +5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg index 91b4699598..915523eadf 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 1 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg index 8d84bc4fd5..d258496552 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg index eafe3eef80..93420a5103 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_ASA-X_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 7 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg index 3286e7fb08..41764726df 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg index bb164bcd99..2e4bb516b0 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg index 82ad174a95..700c0102c2 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_BVOH_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg index f33abf1ec3..941f0a6c81 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 103 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg index 2edb0e32f8..4cd7728a69 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 102 material_print_temperature = =default_material_print_temperature + 3 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg index 30d7139eb9..01b584afcd 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_HIPS_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 101 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg index 1bf36453d1..a4c6fd4046 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg index f413dd3e17..376c9b1d51 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_G.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg index 9b228f7b05..5e27fec150 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6CF_H.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg index 68c8604a95..5ca32bd655 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_F.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg index 66fc7c2f92..bdebb9a0ac 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_G.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg index aceba867c2..01c65f4586 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PA6GF_H.inst.cfg @@ -37,7 +37,7 @@ material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 5 meshfix_maximum_deviation = 0.04 meshfix_maximum_resolution = 0.5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.1 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg index a34c3a4d45..9a8aaeb18e 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg index bd41a808d0..ba4d2b22ec 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg index 6036150353..2b1b5fb2f9 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PETG_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 95 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg index c150380c74..6e05ba15a6 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 107 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg index 74ce8559d2..56765cb156 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 105 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg index f59b68f675..36d6248682 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PLA_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 103 material_print_temperature = =default_material_print_temperature + 10 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.5 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg index 689c1fe076..d88ff841d0 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg index 514cdcbfde..9bb1258fc8 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg index 123dc9a953..7a662ec6d1 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-M_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg index 9c3f620a2d..767b72a566 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg index 0b841dfb09..da088dc345 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg index adfe816125..1ae6c25ebb 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_PVA-S_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.2 material_flow = 100 material_print_temperature = =default_material_print_temperature material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = True retraction_min_travel = =3*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg index 4b6108e51d..a9eb8331c8 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_F.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.1 material_flow = 111 material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg index 99af35534f..03cb145944 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_G.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.1 material_flow = 111 material_print_temperature = =default_material_print_temperature + 5 material_print_temperature_layer_0 = =default_material_print_temperature + 3 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg index 21043cae58..ac77c87265 100644 --- a/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg +++ b/resources/quality/strateo3d/Standard_1_2_Experimental/s3d_std1.2_TPU98A_H.inst.cfg @@ -24,7 +24,7 @@ line_width = =machine_nozzle_size/machine_nozzle_size*1.1 material_flow = 111 material_print_temperature = =default_material_print_temperature + 8 material_print_temperature_layer_0 = =default_material_print_temperature + 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_extra_prime_amount = 0.3 retraction_hop_only_when_collides = False retraction_min_travel = =2*line_width diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg index ac5f3e5bee..a033f60186 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 110 prime_tower_size = 35 retraction_min_travel = 2 diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg index eca85becc6..a8da0b4092 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg @@ -19,7 +19,7 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 110 prime_tower_size = 35 retraction_hop_enabled = False diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg index 8071d7193e..d807f97293 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg @@ -30,7 +30,7 @@ material_flow_layer_0 = 93 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 110 prime_tower_size = 35 retraction_amount = 5 diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg index 8354fba5e0..51329150b7 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg @@ -30,7 +30,7 @@ material_flow_layer_0 = 93 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 110 prime_tower_size = 35 retraction_amount = 5 diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg index 074632abda..f201d4c632 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg @@ -19,7 +19,7 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 110 prime_tower_size = 35 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index eeb924906f..632a1fb46d 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ machine_min_cool_heat_time_window = 15 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index a64c8298a2..0667ef961d 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index 16be0db845..d93ba61d9d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -2 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 35 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg index 916b283c9c..b92a826f5a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_enable = False +prime_tower_mode = none speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg index 5dcbe80bbb..2fe35f1a2e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_enable = False +prime_tower_mode = none speed_print = 50 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg index 1420880995..fcecc2701b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_enable = False +prime_tower_mode = none speed_print = 55 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg index e0dd43cc28..cf417a84b6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' skin_overlap = 20 speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg index 16ece7c2dd..363a43975e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -1 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg index ca7fd8cbf3..92dae4a19f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' skin_overlap = 10 support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index 5de59e58c9..2540a78b21 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -18,7 +18,7 @@ infill_wipe_dist = 0 layer_height = 0.2 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index b2020831d7..37e8df992d 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -18,7 +18,7 @@ infill_wipe_dist = 0 layer_height = 0.15 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 4be3a9c13a..5ba84b0564 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index 2e24f485d0..0fb115b548 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index 28e8ccbf75..d0d447acdf 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 5113277ab2..e55a49baba 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 636ce41e71..ee55427cf7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index a7c533bfea..15410514cd 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index 1d44e48193..a79b715ee0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -2 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_topbottom = =math.ceil(speed_print * 40 / 70) speed_wall = =math.ceil(speed_print * 55 / 70) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index 6b99ed5a70..a838352f48 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index 97be45babc..e5a10d9222 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_print = 60 speed_topbottom = =math.ceil(speed_print * 30 / 60) diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index f305caa82d..486b74c1b2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 top_bottom_thickness = 1 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index c82043d3af..4293ca81f1 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -24,7 +24,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_amount = 6.5 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index 74a628f7cb..1b396f5417 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index fa9b4c54ea..6c4ee71b82 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -23,7 +23,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg index cffd1e6075..d8fca155d3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 20 speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg index 94fe824f5e..5ea9fe9336 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg index 05a6896646..4e03569ca6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPLA_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none skin_overlap = 10 speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index dcca81f3ef..0443afa3f6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 585ae8eefe..ccae2cc5d8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.4 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index 2280a837ae..9596b00d33 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.3 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 17 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False skin_overlap = 0 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg index b1f867807b..4a7e29ec36 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg index a75ae74ada..5c5b732990 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 15 layer_height = 0.4 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg index c1544a00e2..9a48e11a7b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 15 layer_height = 0.3 material_print_temperature = =default_material_print_temperature + 12 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index a0fc036566..747730c0a7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 547ab013fb..40f0779369 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index b17789ad0f..03116ec10d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg index 3eafff9a07..aab2e25ac2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 7 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing = all speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg index fe36a86948..45ec96e089 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 7 layer_height = 0.4 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing = all speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg index 2bba762e2d..ee92c6add7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 7 layer_height = 0.3 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal retraction_combing = all speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 57a830402a..84a9b9a5fb 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 40f710327f..ae59471ff3 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.4 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index 702c64bb78..2a4c093dca 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -18,7 +18,7 @@ layer_height = 0.3 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 145389fbe4..144a47769b 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index 68d54bd406..cedba132eb 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,7 +16,7 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 2aa79cad79..32f623e432 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' layer_height = 0.3 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 retraction_count_max = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg index a9b7a92918..5e0816ef9a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Draft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none speed_print = 45 support_angle = 70 top_bottom_thickness = =layer_height * 6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg index 16e17c500e..36e25d258a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Superdraft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg index 96dec4f1c5..ffbc413b6e 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPLA_Verydraft_Print.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 35) speed_topbottom = =math.ceil(speed_print * 20 / 35) speed_wall = =math.ceil(speed_print * 25/ 35) diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 859eb3b33a..63dd03590c 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -23,7 +23,7 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 61ace7da80..a81683200f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -23,7 +23,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index e45b8f2d1d..cb0e4358d6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -24,7 +24,7 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg index eab1a39931..64ad8ff7f3 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skin_overlap = 20 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg index ad1e26c7da..2cdc81a5d9 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skin_overlap = 15 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg index e5ae49b17d..fa2b7026a1 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 1 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_infill_sparse_thickness = =3*layer_height diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg index 38334b4358..d16740c8ef 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175/(layer_height*line_width)) support_infill_sparse_thickness = =2*layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg index ec86494397..644f302cde 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pc_0.1mm.inst.cfg @@ -20,7 +20,7 @@ machine_min_cool_heat_time_window = 15 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg index 77082932a5..3fb19b43a2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_pp_0.1mm.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg index 6877d9b6a2..ad25724904 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.06mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg index de1905e410..c0890c9740 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 45 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg index ae5c9bcbc1..fbe263ab43 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.1mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg index 701a2db84d..059d39f6c1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.2mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg index 684336d1eb..cb741764d6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_abs_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 7 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 support_bottom_distance = =support_z_distance support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg index a7a17e5f69..3af6b9a69d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg index a3b8129ed7..1526b46ba5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg index 5c051039d0..999e2ce9c9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.2mm.inst.cfg @@ -16,7 +16,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg index 61073067fc..42b98f5be7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_bam_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg index 880461bccf..864421ed78 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.06mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg index 5dd5e61f82..2591f15abb 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg index 7617b35b3b..ab0354f9ea 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.1mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg index 7ed1fcd298..7ac2d06998 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_cpe-plus_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg index f46f816cfb..1366b0700b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.06mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg index 2c23449373..3dd4cc8cd8 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.15mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg index e0899c8dc2..074a3b66dd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.1mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg index 329bd095d5..cc9c42e572 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pc_0.2mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg index 4b8f9f433b..d313f08887 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg index 5581284de4..73105ed512 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg index 30af138465..b6eac28eb9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg index e5dc960d98..7ee4df3cac 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_topbottom = =math.ceil(speed_print * 40 / 70) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg index 719adc820b..80a564e05a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg index eee8fc31b6..f1c188d7d9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.15mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg index fa87825718..93ce7ac9b1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.1mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg index 6c90ec685f..84dcf31f04 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pp_0.2mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg index b5253cb077..26cce4fcad 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg index 69cf85f349..86d98cfd6c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg index 397992c551..2715630b07 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg index 773da6d3ac..8446a7957f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg index 10e43b5699..8e4d4596af 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_tough-pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg index 312afa0421..4f8a58c974 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.06mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg index ee0525c13e..f854ea8815 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg index b53e8275a2..d854b78f65 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.1mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg index 57413c4b30..9ac0fa149f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.2mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg index 0052ce90cd..2d2c5a2b58 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 7 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg index 8732c3ad63..efec8a9215 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg index e7e50350c0..4de8ea6aa4 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.2mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg index 5ecaa739db..da3e1d0469 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-petg_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg index 2939389a3c..ddc0bd768a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg index 136a3bed42..cd4fc7c176 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg index 2b430c1afb..d5a719e023 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg index dcbb580edb..71f1169b40 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg index fc2a185be4..d7abde7dff 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg index c84c2fb66e..0fd04cc7ac 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg index 2aa24f805d..8ec8119ef6 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg index 47687fb5be..22e6f06262 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg index 151af3ed50..090d3a4839 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.2mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg index 56c097d890..18434874c1 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 14 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg index c2d04c9bad..ff96a0df68 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.2mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg index caf16e5f94..a3d9b394b9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 17 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg index 1cd46fab48..dc46682c39 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe-plus_0.4mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_infill = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg index f9ee324f33..f2ea43800e 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg index f883fe1998..58193faaaf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.3mm.inst.cfg @@ -14,7 +14,7 @@ weight = -3 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 12 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg index a5c059c5e6..7e58326c02 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_cpe_0.4mm.inst.cfg @@ -14,7 +14,7 @@ weight = -4 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg index e7d656dcc4..5b33c9854f 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.2mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg index 08c1f4933b..6ac1edf4e9 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.3mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg index c4d2894885..536a00cc00 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_nylon_0.4mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg index d901c6c0dd..539a8c5a7c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg index 0279882346..bf92354310 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.3mm.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg index 373d6a0b78..138369ef63 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_petg_0.4mm.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg index 1feae070fc..a3935c55f7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg index f93f0848db..9f7162abe0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg index 67f9cdfcf0..997095fcbf 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg index 163f32a36d..1c681aaeb2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg @@ -18,7 +18,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg index 3f75c3366e..e054336e24 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg @@ -18,7 +18,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg index b2c5dab3c4..3afea841d3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg @@ -18,7 +18,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg index 1f706632ce..a59a80d04a 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.2mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none speed_print = 45 speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg index b1437e9160..c840722681 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.3mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg index 7c3c4ff6e9..1865589991 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tough-pla_0.4mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg index 75949f45aa..709e798502 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg @@ -21,7 +21,7 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg index 034bda5d09..12aac8dcd5 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg @@ -22,7 +22,7 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg index e7189d5467..8958aa30c0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg index 9d7b4455d6..79f23f9c2c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg index e2a5c54c66..a187dc3179 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg index 26d3dc7fb8..cc2c57bcff 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-abs_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg index b1dae1cb7a..9649f71775 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg index 4d4ffa0059..a0d9dbdee7 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.3mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg index 5cc6a43e13..840008f60d 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-petg_0.4mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg index 59f8409483..c0719e38b3 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg index a4cdd898f1..8f045a1238 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg index 79dc105f86..b1e8b913fd 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg index a76864a1a3..176cfb2cb2 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg index d364232726..404435e21b 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg index 02a71fa9b7..76724ad958 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-tough-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg index 12b815d5ab..b69ddd1011 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =3 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg index 5390b3ecb7..67a101d2bc 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg index b15b5958a7..66c0486b0f 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg index e273e85eb5..6e36d9578f 100644 --- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg index ea2902cd6c..9b81b09599 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg index bbbad9be1f..e596c6fcd0 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg index 300e2ebaed..5c9671c99e 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg index 84040ede4e..872368142c 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg index 402ae15eba..2b76474e5f 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg index 0c9154a233..dc84108298 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg index e7b72d6cd0..3706d83424 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg index 38c857de5e..6e03ebd7e5 100644 --- a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg index 5779142162..dd81027cfb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pc_0.1mm.inst.cfg @@ -20,7 +20,7 @@ machine_min_cool_heat_time_window = 15 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg index 64b1be79aa..82df5e1ad8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_pp_0.1mm.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg index 573b758705..f96f28e71f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.06mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg index 926ef49922..9cc0a12b5a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 45 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg index 598e83d922..651c780d32 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.1mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg index 5f5e9e2fd3..28bd4cddff 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.2mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 50 / 60) speed_print = 60 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg index 8656a28067..49e70ecb1c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_abs_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature + 7 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 support_bottom_distance = =support_z_distance support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg index a4381e0e3b..b2dd10f321 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_print = 80 speed_topbottom = =math.ceil(speed_print * 30 / 80) speed_wall = =math.ceil(speed_print * 40 / 80) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg index 5f4c480fa4..ba704aa34b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' support_angle = 45 support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg index 9e3c0153b1..ccccb2d3e8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.2mm.inst.cfg @@ -16,7 +16,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg index bd4e13ebaf..cc6e8f9453 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_bam_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_replaces_support = False machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100 +prime_tower_mode = ='normal' if (min(extruderValues('material_surface_energy')) < 100) else 'none' speed_topbottom = =math.ceil(speed_print * 35 / 70) speed_wall = =math.ceil(speed_print * 50 / 70) speed_wall_0 = =math.ceil(speed_wall * 35 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg index a77d1b4233..0b11bc463b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.06mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 8 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg index 805fb08ead..476cdad5ce 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.15mm.inst.cfg @@ -15,7 +15,7 @@ weight = -1 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg index 77f775d672..6a18d6a859 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.1mm.inst.cfg @@ -18,7 +18,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 5 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg index 877c48c42d..dcd01b1084 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_cpe-plus_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 infill_wipe_dist = 0 machine_min_cool_heat_time_window = 15 multiple_mesh_overlap = 0 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True retraction_hop = 0.2 retraction_hop_enabled = False diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg index 0b471a8c75..a28ac8382e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.06mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 20 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg index 6c9710e436..1ed3ad4ab3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.15mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg index 945b77e699..bfc007fd85 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.1mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_print_temperature = =default_material_print_temperature - 10 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg index b523e3c646..b8ad1d3747 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pc_0.2mm.inst.cfg @@ -20,7 +20,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 multiple_mesh_overlap = 0 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_wipe_enabled = True raft_airgap = 0.25 retraction_hop = 2 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg index f34549bc78..e724f809d5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg index 4a9e914b99..2cce79480c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 70 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg index dc73f13bb5..5a730aba3a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg index ead512bb50..a1bde9d68d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_topbottom = =math.ceil(speed_print * 40 / 70) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg index c6641e7a08..e0070ff73b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg index 85e892628d..a392918738 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.15mm.inst.cfg @@ -21,7 +21,7 @@ machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg index 531f946ba8..8e59e505fd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.1mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg index a7f63a76b1..263cee30dd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_pp_0.2mm.inst.cfg @@ -22,7 +22,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 8 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_size = 16 prime_tower_wipe_enabled = True retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg index cf7a8335b8..2bf08e3489 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg index a7dcb61128..3b44a9eb37 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg index f053b33478..3167f39563 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg index 4e98b6005a..238468f784 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 50 speed_roofing = =math.ceil(speed_wall * 20 / 24) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg index 5c6ed28548..208277dc9b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_tough-pla_0.3mm.inst.cfg @@ -22,7 +22,7 @@ infill_sparse_density = 15 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg index a69ff33f76..3f8300e24b 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.06mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.8 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 10 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 50) speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg index 9c7ceca13b..cf2437cc2a 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.8 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg index ca659622cb..a0c9d24dab 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.1mm.inst.cfg @@ -16,7 +16,7 @@ machine_nozzle_cool_down_speed = 0.85 machine_nozzle_heat_up_speed = 1.5 material_final_print_temperature = =material_print_temperature - 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 speed_infill = =math.ceil(speed_print * 40 / 55) speed_print = 55 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg index f430e6bc16..7ae2965c0f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.2mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg index 98ca8927b6..769405708d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 7 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.15 retraction_amount = 6.5 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg index 201c663d5c..5eb8c228c6 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 20 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg index 55696eccb4..125ceab2d7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.2mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg index fe3eeb67ad..dda28b98dd 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-petg_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 20 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none retraction_amount = 8 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg index c2bb123d04..fc03e3f464 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg index 713f94219f..8e77d8d49f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 12 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg index 1e2820f565..1459cec327 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.1mm.inst.cfg @@ -14,7 +14,7 @@ weight = 0 [values] machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_prime_speed = =retraction_speed support_bottom_distance = =support_z_distance diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg index 02d22b06b8..d2a1d5a176 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.2mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg index b0d5d41d0f..7cffc4b104 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 12 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg index 595de835ba..e4ab6230a7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg index 55e724da9d..f4f251df8c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.15mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg index 07c97a632f..902e921ce3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_prime_speed = =retraction_speed speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg index ee0ee279e6..cc3bdb2234 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.2mm.inst.cfg @@ -43,7 +43,7 @@ material_extrusion_cool_down_speed = 0.7 material_max_flowrate = 14 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg index 875bd5a669..9e10ff65b0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_max_flowrate = 14 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = False +prime_tower_mode = none raft_airgap = 0.25 retraction_amount = 6.5 retraction_prime_speed = =retraction_speed diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg index 0dd369e4dd..a7877d90e1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.2mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 20 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg index e6ce183f4a..2b5b521f02 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.3mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 17 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_print = 50 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg index 0c3abc6e3f..ff9a049f7e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe-plus_0.4mm.inst.cfg @@ -17,7 +17,7 @@ brim_width = 14 machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 15 -prime_tower_enable = True +prime_tower_mode = normal retraction_hop = 0.1 retraction_hop_enabled = False speed_infill = =math.ceil(speed_print * 40 / 50) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg index eb6e07e080..a3340f81a8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.2mm.inst.cfg @@ -14,7 +14,7 @@ weight = -2 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg index e7958d9841..7c80d16f24 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.3mm.inst.cfg @@ -14,7 +14,7 @@ weight = -3 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 12 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg index 0683b2959b..18ec3e9dbe 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_cpe_0.4mm.inst.cfg @@ -14,7 +14,7 @@ weight = -4 [values] brim_width = 15 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg index 5a774e0750..798db0dfc8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.2mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg index bed4ac46d7..86d6130a70 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.3mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg index a0d58757da..2d9c3ebabe 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_nylon_0.4mm.inst.cfg @@ -17,7 +17,7 @@ machine_nozzle_cool_down_speed = 0.9 machine_nozzle_heat_up_speed = 1.4 material_print_temperature = =default_material_print_temperature - 5 ooze_shield_angle = 40 -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.45 support_angle = 70 switch_extruder_prime_speed = 30 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg index 6208ad9bec..7f51af7154 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg index 98b0d3f5f8..81d08397f3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.3mm.inst.cfg @@ -15,7 +15,7 @@ weight = -3 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 40 speed_topbottom = =math.ceil(speed_print * 25 / 40) speed_wall = =math.ceil(speed_print * 30 / 40) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg index 156113b809..689455183f 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_petg_0.4mm.inst.cfg @@ -15,7 +15,7 @@ weight = -4 brim_width = 7 cool_fan_speed = 20 material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 33 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 30 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg index 10bf06fbb5..d00e5235ba 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.2mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg index 1a63005ced..a22439011e 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.3mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg index 5e22cee246..7a97620cb4 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pla_0.4mm.inst.cfg @@ -16,7 +16,7 @@ gradual_infill_step_height = =3 * layer_height machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = True +prime_tower_mode = normal speed_infill = =math.ceil(speed_print * 35 / 45) speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg index 149104700e..addcc8e504 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg @@ -18,7 +18,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg index 670ec78d51..dde38061ca 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg @@ -18,7 +18,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg index c9b5c26d64..bab23c5ee1 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg @@ -18,7 +18,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 retraction_count_max = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg index 26c20268ea..1c5161a635 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.2mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = False +prime_tower_mode = none speed_print = 45 speed_topbottom = =round(speed_print * 35 / 45) speed_wall = =round(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg index cc28dc5150..0a4c4ad2c7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.3mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 35) speed_print = 35 speed_topbottom = =math.ceil(speed_print * 20 / 35) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg index eb338d1e1d..2fc8aaf746 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tough-pla_0.4mm.inst.cfg @@ -17,7 +17,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 15 -prime_tower_enable = False +prime_tower_mode = none speed_infill = =math.ceil(speed_print * 30 / 30) speed_print = 30 speed_topbottom = =math.ceil(speed_print * 20 / 30) diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg index 43436cd4c7..132a0e0760 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg @@ -21,7 +21,7 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg index 58b524dd2a..c0b54402f2 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg @@ -22,7 +22,7 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg index d17ec5486a..076f3df437 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg @@ -21,7 +21,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_enable = True +prime_tower_mode = normal prime_tower_flow = 100 retraction_count_max = 15 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg index 9ba4a38c6e..e308015dd8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg index 4ab74980ef..3d7cabe23d 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg index 269d51dd4b..f7ab03fac0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-abs_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 22 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.15 retraction_amount = 4 retraction_prime_speed = 15 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg index 4f56167ffd..692f4f8aa7 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg index 9fdf9a665b..93e4e071f5 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.3mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg index 3368ae6e2d..592c835689 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-petg_0.4mm.inst.cfg @@ -46,7 +46,7 @@ material_flow = 93 material_max_flowrate = 23 material_print_temperature = =default_material_print_temperature - 5 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal retraction_amount = 3.5 retraction_prime_speed = 15 retraction_speed = 45 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg index ca93df9dc1..fd0b6da130 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg index 4461ae0772..a6b7ac0439 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 10 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg index 1acdad53a0..c873edfacb 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 15 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg index 4973ec35bb..413903a8e8 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.2mm.inst.cfg @@ -47,7 +47,7 @@ material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 10 meshfix_maximum_resolution = 0.7 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg index 2bcf3fa82d..f0c5169389 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.3mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg index 3e4693c115..cb12b8740c 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_um-tough-pla_0.4mm.inst.cfg @@ -44,7 +44,7 @@ material_flow = 93 material_max_flowrate = 17 material_print_temperature = =default_material_print_temperature + 15 optimize_wall_printing_order = False -prime_tower_enable = True +prime_tower_mode = normal raft_airgap = 0.25 retraction_amount = 4 retraction_prime_speed = 22 diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg index 2bc28f4c1a..022e91ed9f 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.06mm.inst.cfg @@ -15,7 +15,7 @@ weight = 1 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =3 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg index f5b8c35298..40cf72eff4 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.15mm.inst.cfg @@ -14,7 +14,7 @@ weight = -1 [values] brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg index 6457f97c9c..8b5a3e9f67 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.1mm.inst.cfg @@ -15,7 +15,7 @@ weight = 0 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = =2 * layer_height diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg index eef90f5f17..1ff95a0e3b 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.2mm.inst.cfg @@ -15,7 +15,7 @@ weight = -2 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature + 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_interface_enable = True diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg index e1862ce3c4..58796a07a4 100644 --- a/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_pva_0.3mm.inst.cfg @@ -16,7 +16,7 @@ weight = -3 brim_replaces_support = False cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr)) material_print_temperature = =default_material_print_temperature - 5 -prime_tower_enable = False +prime_tower_mode = none retraction_count_max = 5 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width)) support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg index 8b807c1eb5..b7d9b2a05f 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg index ebc58413e2..e3e8d486b0 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg index 1204be4c15..f01921353b 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg index 6a7d52af4b..0a1cc1204d 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.4_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg index 40d414cbcb..4437f2c531 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg index 6144a2c3f0..3796177bc5 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg index 5bf5d910e8..1ec4911676 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.15mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg index 21407b6e66..36b56b6513 100644 --- a/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_cc0.6_um-pla_0.2mm.inst.cfg @@ -18,7 +18,7 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles' machine_nozzle_cool_down_speed = 0.75 machine_nozzle_heat_up_speed = 1.6 material_print_temperature = =default_material_print_temperature + 10 -prime_tower_enable = True +prime_tower_mode = normal speed_print = 45 speed_topbottom = =math.ceil(speed_print * 35 / 45) speed_wall = =math.ceil(speed_print * 40 / 45) diff --git a/resources/variants/liquid/liquid_vo08.inst.cfg b/resources/variants/liquid/liquid_vo08.inst.cfg index 58cbea1b9d..a69a0f806e 100644 --- a/resources/variants/liquid/liquid_vo08.inst.cfg +++ b/resources/variants/liquid/liquid_vo08.inst.cfg @@ -37,7 +37,7 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 5 material_standby_temperature = 100 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True retract_at_layer_change = =not magic_spiralize retraction_amount = 3 diff --git a/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg b/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg index 4bf51a967a..b66b984346 100644 --- a/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_high_temp_04.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.3 machine_nozzle_id = HT0.4 machine_nozzle_size = 0.4 machine_nozzle_tip_outer_diameter = 1.0 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False support_angle = 45 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg index 3d705453d8..968c7c7262 100644 --- a/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_04.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.3 machine_nozzle_id = Standard 0.4 machine_nozzle_size = 0.4 machine_nozzle_tip_outer_diameter = 1.0 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False support_angle = 60 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg index 3443f64531..9b6d921d70 100644 --- a/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_06.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.4 machine_nozzle_id = Standard 0.6 machine_nozzle_size = 0.6 machine_nozzle_tip_outer_diameter = 1.5 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = False support_angle = 55 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg index f436ce1fe7..11ff582ef1 100644 --- a/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_08.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.5 machine_nozzle_id = Standard 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = True support_angle = 50 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg index b957d58d9f..c9d50d91c3 100644 --- a/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_10.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.6 machine_nozzle_id = Standard 1.0 Experimental machine_nozzle_size = 1.0 machine_nozzle_tip_outer_diameter = 2.5 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = True support_angle = 50 support_use_towers = True diff --git a/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg b/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg index 3a35f9c4a2..f1f03bfcb4 100644 --- a/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg +++ b/resources/variants/strateo3d/strateo3d_standard_12.inst.cfg @@ -14,7 +14,7 @@ layer_height_0 = 0.7 machine_nozzle_id = Standard 1.2 Experimental machine_nozzle_size = 1.2 machine_nozzle_tip_outer_diameter = 3.0 -prime_tower_enable = True +prime_tower_mode = normal retract_at_layer_change = True support_angle = 50 support_use_towers = True diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index 4190aab0cd..baf5f4043a 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 62227f50f6..5250dff5e9 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -26,7 +26,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index 941634e3a6..109cd55a9d 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index 2a88f165e6..c40c69ff62 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -26,7 +26,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker_s3_aa0.8.inst.cfg b/resources/variants/ultimaker_s3_aa0.8.inst.cfg index c30365897b..e8ac3c5714 100644 --- a/resources/variants/ultimaker_s3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker_s3_bb0.8.inst.cfg b/resources/variants/ultimaker_s3_bb0.8.inst.cfg index 34e1b6d308..ef97986a94 100644 --- a/resources/variants/ultimaker_s3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s3_bb0.8.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker_s5_aa0.8.inst.cfg b/resources/variants/ultimaker_s5_aa0.8.inst.cfg index b482c418f0..522723db86 100644 --- a/resources/variants/ultimaker_s5_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker_s5_bb0.8.inst.cfg b/resources/variants/ultimaker_s5_bb0.8.inst.cfg index 660a6b10f4..3cdaa70171 100644 --- a/resources/variants/ultimaker_s5_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s5_bb0.8.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_hop = 2 diff --git a/resources/variants/ultimaker_s7_aa0.8.inst.cfg b/resources/variants/ultimaker_s7_aa0.8.inst.cfg index a5b6a66516..ca6079aeb9 100644 --- a/resources/variants/ultimaker_s7_aa0.8.inst.cfg +++ b/resources/variants/ultimaker_s7_aa0.8.inst.cfg @@ -23,7 +23,7 @@ machine_nozzle_id = AA 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 6.5 diff --git a/resources/variants/ultimaker_s7_bb0.8.inst.cfg b/resources/variants/ultimaker_s7_bb0.8.inst.cfg index 6823fe18a4..06eb01ee0f 100644 --- a/resources/variants/ultimaker_s7_bb0.8.inst.cfg +++ b/resources/variants/ultimaker_s7_bb0.8.inst.cfg @@ -25,7 +25,7 @@ machine_nozzle_id = BB 0.8 machine_nozzle_size = 0.8 machine_nozzle_tip_outer_diameter = 2.0 multiple_mesh_overlap = 0 -prime_tower_enable = False +prime_tower_mode = none prime_tower_wipe_enabled = True raft_surface_layers = 1 retraction_amount = 4.5 From 6c8ee8d98ac82d5e5b0f822f7756e226466a5065 Mon Sep 17 00:00:00 2001 From: wawanbreton Date: Fri, 16 Feb 2024 08:05:52 +0000 Subject: [PATCH 12/12] Applied printer-linter format --- resources/definitions/deltacomb_dc20flux.def.json | 2 +- resources/definitions/deltacomb_dc21flux.def.json | 2 +- resources/definitions/deltacomb_dc30flux.def.json | 2 +- resources/definitions/elegoo_neptune_2D.def.json | 2 +- resources/definitions/lotmaxx_sc60.def.json | 2 +- resources/definitions/strateo3d_IDEX420.def.json | 2 +- resources/definitions/ultimaker_method_base.def.json | 2 +- .../Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg | 2 +- .../Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg | 2 +- resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg | 2 +- .../quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg | 2 +- .../tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg | 2 +- .../tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg | 2 +- .../tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg | 2 +- .../tizyx_evy_dual_global_Normal_Quality.inst.cfg | 2 +- .../tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg | 2 +- resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg | 2 +- .../quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg | 2 +- resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg | 2 +- 42 files changed, 42 insertions(+), 42 deletions(-) diff --git a/resources/definitions/deltacomb_dc20flux.def.json b/resources/definitions/deltacomb_dc20flux.def.json index cc4a38c4d5..50f69636bd 100644 --- a/resources/definitions/deltacomb_dc20flux.def.json +++ b/resources/definitions/deltacomb_dc20flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": "50" }, + "prime_tower_mode": { "value": "normal" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/deltacomb_dc21flux.def.json b/resources/definitions/deltacomb_dc21flux.def.json index dd710af627..e09fbeca63 100644 --- a/resources/definitions/deltacomb_dc21flux.def.json +++ b/resources/definitions/deltacomb_dc21flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": "50" }, + "prime_tower_mode": { "value": "normal" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/deltacomb_dc30flux.def.json b/resources/definitions/deltacomb_dc30flux.def.json index 789af29650..f59bf53a9a 100644 --- a/resources/definitions/deltacomb_dc30flux.def.json +++ b/resources/definitions/deltacomb_dc30flux.def.json @@ -31,8 +31,8 @@ "material_final_print_temperature": { "value": "material_print_temperature" }, "material_initial_print_temperature": { "value": "material_print_temperature" }, "material_standby_temperature": { "value": "material_print_temperature" }, - "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": "50" }, + "prime_tower_mode": { "value": "normal" }, "switch_extruder_retraction_amount": { "value": "0" } } } \ No newline at end of file diff --git a/resources/definitions/elegoo_neptune_2D.def.json b/resources/definitions/elegoo_neptune_2D.def.json index e564acc036..2d5ef0024e 100644 --- a/resources/definitions/elegoo_neptune_2D.def.json +++ b/resources/definitions/elegoo_neptune_2D.def.json @@ -55,8 +55,8 @@ "settable_per_extruder": false }, "prime_blob_enable": { "default_value": false }, - "prime_tower_mode": { "default_value": "normal" }, "prime_tower_min_volume": { "default_value": 90 }, + "prime_tower_mode": { "default_value": "normal" }, "prime_tower_size": { "default_value": 30 }, "raft_airgap": { "default_value": 0.25 }, "raft_margin": { "default_value": 5 }, diff --git a/resources/definitions/lotmaxx_sc60.def.json b/resources/definitions/lotmaxx_sc60.def.json index 697dd911b6..89eeac9b75 100644 --- a/resources/definitions/lotmaxx_sc60.def.json +++ b/resources/definitions/lotmaxx_sc60.def.json @@ -44,8 +44,8 @@ "machine_width": { "default_value": 235 }, "meshfix_maximum_resolution": { "value": 0.25 }, "optimize_wall_printing_order": { "value": true }, - "prime_tower_mode": { "value": "normal" }, "prime_tower_min_volume": { "value": 30 }, + "prime_tower_mode": { "value": "normal" }, "retract_at_layer_change": { "value": false }, "retraction_amount": { "value": 4.5 }, "roofing_layer_count": { "value": 1 }, diff --git a/resources/definitions/strateo3d_IDEX420.def.json b/resources/definitions/strateo3d_IDEX420.def.json index 66ecb9999c..785301c51e 100644 --- a/resources/definitions/strateo3d_IDEX420.def.json +++ b/resources/definitions/strateo3d_IDEX420.def.json @@ -112,8 +112,8 @@ "machine_use_extruder_offset_to_offset_coords": { "default_value": false }, "machine_width": { "default_value": 420 }, "material_diameter": { "default_value": 1.75 }, - "prime_tower_mode": { "default_value": "normal" }, "prime_tower_min_volume": { "default_value": 35.6 }, + "prime_tower_mode": { "default_value": "normal" }, "raft_acceleration": { "value": "machine_acceleration" }, "raft_base_acceleration": { "value": "machine_acceleration" }, "raft_interface_acceleration": { "value": "machine_acceleration" }, diff --git a/resources/definitions/ultimaker_method_base.def.json b/resources/definitions/ultimaker_method_base.def.json index 89aaa1b170..911de6d1b1 100644 --- a/resources/definitions/ultimaker_method_base.def.json +++ b/resources/definitions/ultimaker_method_base.def.json @@ -346,9 +346,9 @@ "prime_tower_base_curve_magnitude": { "value": 2 }, "prime_tower_base_height": { "value": 6 }, "prime_tower_base_size": { "value": 10 }, - "prime_tower_mode": { "value": "none" }, "prime_tower_flow": { "value": "material_flow" }, "prime_tower_line_width": { "value": 1 }, + "prime_tower_mode": { "value": "none" }, "prime_tower_raft_base_line_spacing": { "value": "raft_base_line_width" }, "prime_tower_wipe_enabled": { "value": true }, "print_sequence": { "enabled": false }, diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg index bab34c73b6..54807c88b3 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_brass0.4_abs_natural_standard.inst.cfg @@ -38,8 +38,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg index e0ef960b32..312313c9c5 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/abs/Leapfrog_Bolt_Pro_nozzlex0.4_abs_natural_standard.inst.cfg @@ -38,8 +38,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg index 55c26edccb..485e82345a 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_brass0.4_epla_natural_standard.inst.cfg @@ -36,8 +36,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg index b5fa497a33..7fb90fd093 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/epla/Leapfrog_Bolt_Pro_nozzlex0.4_epla_natural_standard.inst.cfg @@ -36,8 +36,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg index 1bf050b6f2..ce3fe8c60b 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_brass0.4_pva_natural_standard.inst.cfg @@ -35,8 +35,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg index 7cde446656..a95c6ce5d3 100644 --- a/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg +++ b/resources/quality/Leapfrog_Bolt_Pro/pva/Leapfrog_Bolt_Pro_nozzlex0.4_pva_natural_standard.inst.cfg @@ -35,8 +35,8 @@ line_width = 0.4 min_infill_area = 0 optimize_wall_printing_order = True prime_tower_brim_enable = True -prime_tower_mode = normal prime_tower_min_volume = 6 +prime_tower_mode = normal prime_tower_size = 20 prime_tower_wipe_enabled = True retract_at_layer_change = False diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg index d30007f18d..dab7612a6c 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Draft_Print.inst.cfg @@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg index a0a1f806ab..7ec446e803 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Superdraft_Print.inst.cfg @@ -26,9 +26,9 @@ material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg index cdadd228be..9913ea3779 100644 --- a/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_PP_Verydraft_Print.inst.cfg @@ -25,9 +25,9 @@ material_bed_temperature_layer_0 = =material_bed_temperature material_print_temperature_layer_0 = =default_material_print_temperature + 2 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg index 31baf4022c..54d9c23b98 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Draft_Print.inst.cfg @@ -30,8 +30,8 @@ material_print_temperature = =default_material_print_temperature - 2 material_print_temperature_layer_0 = =material_print_temperature + 19 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg index 408ad54518..289e9d48b7 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Superdraft_Print.inst.cfg @@ -31,8 +31,8 @@ material_print_temperature = =default_material_print_temperature + 2 material_print_temperature_layer_0 = =material_print_temperature + 15 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg index 9fd95f5c32..c8cad9bb3f 100644 --- a/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/liquid/liquid_vo0.8_TPU_Verydraft_Print.inst.cfg @@ -30,8 +30,8 @@ material_initial_print_temperature = =material_print_temperature material_print_temperature_layer_0 = =material_print_temperature + 17 material_standby_temperature = 100 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retract_at_layer_change = False retraction_count_max = 12 retraction_extra_prime_amount = 0.5 diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg index a033f60186..538bcfedb9 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.cfg @@ -22,8 +22,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_mode = normal prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_min_travel = 2 skirt_gap = 2 diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg index a8da0b4092..86c4cd1894 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg @@ -19,8 +19,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_mode = normal prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_hop_enabled = False support_enable = True diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg index d807f97293..83ec574663 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg @@ -30,8 +30,8 @@ material_flow_layer_0 = 93 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_mode = normal prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_amount = 5 retraction_hop_enabled = False diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg index 51329150b7..2269a480a5 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg @@ -30,8 +30,8 @@ material_flow_layer_0 = 93 material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_mode = normal prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_amount = 5 retraction_hop_enabled = False diff --git a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg index f201d4c632..4fed169568 100644 --- a/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg +++ b/resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg @@ -19,8 +19,8 @@ material_final_print_temperature = =material_print_temperature material_initial_print_temperature = =material_print_temperature material_print_temperature = =default_material_print_temperature optimize_wall_printing_order = True -prime_tower_mode = normal prime_tower_flow = 110 +prime_tower_mode = normal prime_tower_size = 35 retraction_hop_enabled = False support_enable = True diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index 144a47769b..c9e31486c0 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -16,9 +16,9 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index cedba132eb..e821581360 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -16,9 +16,9 @@ brim_width = 25 infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index 32f623e432..a5817651d8 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -17,9 +17,9 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral' layer_height = 0.3 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index 63dd03590c..d8f7812d75 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -23,8 +23,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index a81683200f..a689035132 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -23,8 +23,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index cb0e4358d6..f4b61cac5d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -24,8 +24,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg index 1c681aaeb2..61ce2bd96c 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.2mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg index e054336e24..6b91c97bda 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.3mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg index 3afea841d3..abbfb2ce02 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pp_0.4mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg index 709e798502..96b82799f0 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.2mm.inst.cfg @@ -21,8 +21,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg index 12aac8dcd5..d53c79de87 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.3mm.inst.cfg @@ -22,8 +22,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg index 8958aa30c0..f9c4e17e91 100644 --- a/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_tpu_0.4mm.inst.cfg @@ -21,8 +21,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg index addcc8e504..1c7b79f8e0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.2mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 11 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 10 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg index dde38061ca..67e35f3eca 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.3mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 13 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 15 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg index bab23c5ee1..53b8786303 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_pp_0.4mm.inst.cfg @@ -18,9 +18,9 @@ material_final_print_temperature = =material_print_temperature - 10 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature + 15 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 prime_tower_min_volume = 20 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 0.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg index 132a0e0760..9451394fb3 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.2mm.inst.cfg @@ -21,8 +21,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 4 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg index c0b54402f2..4b498104e0 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.3mm.inst.cfg @@ -22,8 +22,8 @@ material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 material_print_temperature = =default_material_print_temperature - 2 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg index 076f3df437..48977f6a86 100644 --- a/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg +++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_tpu_0.4mm.inst.cfg @@ -21,8 +21,8 @@ material_final_print_temperature = =material_print_temperature - 10 material_flow = 105 material_initial_print_temperature = =material_print_temperature - 10 multiple_mesh_overlap = 0.2 -prime_tower_mode = normal prime_tower_flow = 100 +prime_tower_mode = normal retraction_count_max = 15 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5