From 322e4ac904c320f3323efd5fcc7237a35dcfffab Mon Sep 17 00:00:00 2001 From: RFBomb Date: Mon, 25 Jan 2021 23:06:32 -0500 Subject: [PATCH] Correct syntax error that prevented checkbox showing up --- .../MachineSettingsPrinterTab.qml | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml b/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml index 176119bd68..49f58019d5 100644 --- a/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml +++ b/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml @@ -330,24 +330,25 @@ Item } } - /* - - Proposed fix for this issue: https://github.com/Ultimaker/Cura/issues/9167 - - Allows user to toggle if GCODE coordinates are affected by the extruder offset. - - Machine wide setting. CuraEngine/src/gcodeExport.cpp is not set up to evaluate per extruder currently. - - If it is moved to per-extruder (unlikely), then this should be moved to the extruder tab) - */ + /* + - Proposed fix for this issue: https://github.com/Ultimaker/Cura/issues/9167 + - Allows user to toggle if GCODE coordinates are affected by the extruder offset. + - Machine wide setting. CuraEngine/src/gcodeExport.cpp is not set up to evaluate per extruder currently. + - If it is moved to per-extruder (unlikely), then this should be moved to the extruder tab) + */ Cura.SimpleCheckBox // "GCode Affected By Extruder Offsets" { - id: ApplyExtruderOffsetsToGCodeCheckbox + id: applyExtruderOffsetsCheckbox containerStackId: machineStackId - settingKey: "machine_use_extruder_offset_to_offset_coords" + settingKey: "machine_use_extruder_offset_to_offset_coords" settingStoreIndex: propertyStoreIndex labelText: catalog.i18nc("@label", "Apply Extruder offsets to GCode") labelFont: base.labelFont labelWidth: base.labelWidth forceUpdateOnChangeFunction: forceUpdateFunction } - + + /* The "Shared Heater" feature is temporarily disabled because its implementation is incomplete. Printers with multiple filaments going into one nozzle will keep the inactive filaments retracted at the