mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-11-02 20:52:20 -07:00
Merge branch 'Ultimaker:main' into pro430
This commit is contained in:
Orel
GitHub
commit
2ef645f64d
681 changed files with 204115 additions and 228829 deletions
|
|
@ -29,7 +29,7 @@
|
|||
"machine_center_is_zero": { "default_value": false },
|
||||
"gantry_height": { "value": "0" },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": { "default_value": ";Profil Homepage: https://github.com/NilsRo/Cura_Anycubic_MegaS_Profile\n\n;Slicer Information - (Support for OctoPrint Slicer Estimator)\n;Slicer info:material_guid;{material_guid}\n;Slicer info:material_id;{material_id}\n;Slicer info:material_brand;{material_brand}\n;Slicer info:material_name;{material_name}\n;Slicer info:filament_cost;{filament_cost}\n;Slicer info:material_bed_temperature;{material_bed_temperature}\n;Slicer info:material_bed_temperature_layer_0;{material_bed_temperature_layer_0}\n;Slicer info:material_print_temperature;{material_print_temperature}\n;Slicer info:material_print_temperature_layer_0;{material_print_temperature_layer_0}\n;Slicer info:material_flow;{material_flow}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:machine_nozzle_size;{machine_nozzle_size}\n;Slicer info:wall_thickness;{wall_thickness}\n;Slicer info:speed_print;{speed_print}\n;Slicer info:speed_topbottom;{speed_topbottom}\n;Slicer info:travel_speed;{travel_speed}\n;Slicer info:support;{support}\n;Slicer info:retraction_speed;{retraction_speed}\n;Slicer info:retraction_amount;{retraction_amount}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:infill_pattern;{infill_pattern}\n;Slicer info:infill_sparse_density;{infill_sparse_density}\n;Slicer info:cool_fan_enabled;{cool_fan_enabled}\n;Slicer info:cool_fan_speed;{cool_fan_speed}\n;Slicer info:sliced_at;{day} {date} {time}\nG21 ; metric values \nG90 ; absolute positioning \nM82 ; set extruder to absolute mode \nM107 ; start with the fan off \nM140 S{material_bed_temperature_layer_0} ; Start heating the bed \nG4 S60 ; wait 1 minute \nM104 S{material_print_temperature_layer_0} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0} ; wait for bed \nM109 S{material_print_temperature_layer_0} ; wait for hotend \nM300 S1000 P500 ; BEEP heating done \nG28 X0 Y10 Z0 ; move X/Y to min endstops \nM420 S1 ; Enable leveling \nM420 Z2.0 ; Set leveling fading height to 2 mm \nG0 Z0.15 ; lift nozzle a bit \nG92 E0 ; zero the extruded length \nG1 X50 E20 F500 ; Extrude 20mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F500 ; Retract a little \nG1 X50 F500 ; wipe away from the filament line\nG1 X100 F9000 ; Quickly wipe away from the filament line" },
|
||||
"machine_start_gcode": { "default_value": ";Profil Homepage: https://github.com/NilsRo/Cura_Anycubic_MegaS_Profile\n\n;Slicer Information - (Support for OctoPrint Slicer Estimator)\n;Slicer info:material_guid;{material_guid}\n;Slicer info:material_id;{material_id}\n;Slicer info:material_brand;{material_brand}\n;Slicer info:material_name;{material_name}\n;Slicer info:filament_cost;{filament_cost}\n;Slicer info:material_bed_temperature;{material_bed_temperature}\n;Slicer info:material_bed_temperature_layer_0;{material_bed_temperature_layer_0}\n;Slicer info:material_print_temperature;{material_print_temperature}\n;Slicer info:material_print_temperature_layer_0;{material_print_temperature_layer_0}\n;Slicer info:material_flow;{material_flow}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:machine_nozzle_size;{machine_nozzle_size}\n;Slicer info:wall_thickness;{wall_thickness}\n;Slicer info:speed_print;{speed_print}\n;Slicer info:speed_topbottom;{speed_topbottom}\n;Slicer info:travel_speed;{travel_speed}\n;Slicer info:support;{support}\n;Slicer info:retraction_speed;{retraction_speed}\n;Slicer info:retraction_amount;{retraction_amount}\n;Slicer info:layer_height;{layer_height}\n;Slicer info:infill_pattern;{infill_pattern}\n;Slicer info:infill_sparse_density;{infill_sparse_density}\n;Slicer info:cool_fan_enabled;{cool_fan_enabled}\n;Slicer info:cool_fan_speed;{cool_fan_speed}\n;Slicer info:sliced_at;{day} {date} {time}\nG21 ; metric values \nG90 ; absolute positioning \nM82 ; set extruder to absolute mode \nM900 K0 ; disable lin. adv. if not set in GCODE\nM107 ; start with the fan off \nM140 S{material_bed_temperature_layer_0} ; Start heating the bed \nG4 S60 ; wait 1 minute \nM104 S{material_print_temperature_layer_0} ; start heating the hot end \nM190 S{material_bed_temperature_layer_0} ; wait for bed \nM109 S{material_print_temperature_layer_0} ; wait for hotend \nM300 S1000 P500 ; BEEP heating done \nG28 X0 Y10 Z0 ; move X/Y to min endstops \nM420 S1 ; Enable leveling \nM420 Z2.0 ; Set leveling fading height to 2 mm \nG0 Z0.15 ; lift nozzle a bit \nG92 E0 ; zero the extruded length \nG1 X50 E20 F500 ; Extrude 20mm of filament in a 5cm line. \nG92 E0 ; zero the extruded length again \nG1 E-2 F500 ; Retract a little \nG1 X50 F500 ; wipe away from the filament line\nG1 X100 F9000 ; Quickly wipe away from the filament line" },
|
||||
"machine_end_gcode": { "default_value": "M104 S0 ; Extruder off \nM140 S0 ; Heatbed off \nM107 ; Fan off \nG91 ; relative positioning \nG1 E-5 F300 ; retract a little \nG1 Z+10 E-5 ; X-20 Y-20 F{travel_xy_speed} ; lift print head \nG28 X0 Y0 ; homing \nG1 Y180 F2000 ; reset feedrate \nM84 ; disable stepper motors \nG90 ; absolute positioning \nM300 S440 P200 ; Make Print Completed Tones \nM300 S660 P250 ; beep \nM300 S880 P300 ; beep" },
|
||||
|
||||
"machine_max_acceleration_x": { "value": 3000 },
|
||||
|
|
|
|||
25
resources/definitions/artillery_hornet.def.json
Normal file
25
resources/definitions/artillery_hornet.def.json
Normal file
|
|
@ -0,0 +1,25 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Artillery Hornet",
|
||||
"inherits": "artillery_base",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "Wilds",
|
||||
"platform": "artillery_hornet.stl",
|
||||
"platform_offset": [
|
||||
0,
|
||||
-105.5,
|
||||
0
|
||||
],
|
||||
"quality_definition": "artillery_base"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 25 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_height": { "default_value": 250 },
|
||||
"machine_name": { "default_value": "Artillery Hornet" },
|
||||
"machine_width": { "default_value": 220 }
|
||||
}
|
||||
}
|
||||
65
resources/definitions/biqu_hurakan.def.json
Executable file
65
resources/definitions/biqu_hurakan.def.json
Executable file
|
|
@ -0,0 +1,65 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Biqu Hurakan",
|
||||
"inherits": "biqu_base",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"platform": "BIQU_Hurakan_bed.stl",
|
||||
"has_machine_materials": true,
|
||||
"platform_offset": [
|
||||
0,
|
||||
0,
|
||||
0.01
|
||||
],
|
||||
"quality_definition": "biqu_base"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_print": { "value": 3000 },
|
||||
"acceleration_travel": { "value": 3000 },
|
||||
"coasting_enable": { "value": false },
|
||||
"fill_outline_gaps": { "value": true },
|
||||
"gantry_height": { "value": 35 },
|
||||
"infill_overlap": { "value": 15.0 },
|
||||
"jerk_print": { "value": 12 },
|
||||
"machine_acceleration": { "value": 3000 },
|
||||
"machine_depth": { "value": 235 },
|
||||
"machine_end_gcode": { "default_value": ";BIQU Hurakan end code. More complex. Such wow. Klipper4Life.\r\n\r\nEND_PRINT" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, -35.3],
|
||||
[-31, 25.5],
|
||||
[31, 25.5],
|
||||
[31, -35.5]
|
||||
]
|
||||
},
|
||||
"machine_height": { "value": 270 },
|
||||
"machine_max_acceleration_e": { "value": 10000 },
|
||||
"machine_max_acceleration_x": { "value": 3000 },
|
||||
"machine_max_acceleration_y": { "value": 3000 },
|
||||
"machine_max_acceleration_z": { "value": 100 },
|
||||
"machine_name": { "default_value": "Biqu Hurakan" },
|
||||
"machine_start_gcode": { "default_value": ";BIQU Hurakan start code. Much complex. Very wow. Klipper FTW.\r\n\r\nSTART_PRINT BED_TEMP={material_bed_temperature_layer_0} EXTRUDER_TEMP={material_print_temperature_layer_0}\r\n\r\n; Note: This start/end code is designed to work\r\n; with the stock cfg files provided with the \r\n; BIQU Hurakan. If you alter the macros in the \r\n; cfg files then you may also need to alter this code.\r\n\r\n; Another note: This profile will get you \r\n; part of the way to good prints.\r\n; You still need to tweak settings for each \r\n; different filament that you use.\r\n; Settings such as retraction distance/speed, \r\n; flow, pressure advance, bed/nozzle temperatures\r\n; and others may need to be adjusted.\r\n; Use https://teachingtechyt.github.io/calibration.html to calibrate.\r\n; Also see https://www.youtube.com/watch?v=Ae2G7hl_pZc\r\n; for some good tips." },
|
||||
"machine_width": { "value": 235 },
|
||||
"retract_at_layer_change": { "value": true },
|
||||
"retraction_amount": { "value": 3.0 },
|
||||
"retraction_extrusion_window": { "value": 3.0 },
|
||||
"retraction_speed": { "value": 45 },
|
||||
"roofing_layer_count": { "value": 2 },
|
||||
"skin_overlap": { "value": 15.0 },
|
||||
"speed_layer_0": { "value": 25 },
|
||||
"speed_print": { "value": 120 },
|
||||
"speed_travel": { "value": 200 },
|
||||
"speed_wall_0": { "value": 60 },
|
||||
"speed_wall_x": { "value": 75 },
|
||||
"support_angle": { "value": 45 },
|
||||
"support_enable": { "value": false },
|
||||
"support_infill_rate": { "value": 20 },
|
||||
"support_structure": { "value": "'normal'" },
|
||||
"support_type": { "value": "'buildplate'" },
|
||||
"top_thickness": { "value": 1.0 },
|
||||
"xy_offset_layer_0": { "value": -0.1 }
|
||||
}
|
||||
}
|
||||
28
resources/definitions/creality_cr10smart.def.json
Normal file
28
resources/definitions/creality_cr10smart.def.json
Normal file
|
|
@ -0,0 +1,28 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Creality CR-10 Smart",
|
||||
"inherits": "creality_base",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "ed3d.net",
|
||||
"quality_definition": "creality_base"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 300 },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[32, -32],
|
||||
[32, 34]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 400 },
|
||||
"machine_name": { "default_value": "Creality CR-10 Smart" },
|
||||
"machine_width": { "default_value": 300 }
|
||||
}
|
||||
}
|
||||
32
resources/definitions/creality_sermoonv1.def.json
Normal file
32
resources/definitions/creality_sermoonv1.def.json
Normal file
|
|
@ -0,0 +1,32 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Creality Sermoon V1 & V1 Pro",
|
||||
"inherits": "creality_base",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "Luis Gabriel Gomez",
|
||||
"has_variants": true,
|
||||
"quality_definition": "creality_base"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 25 },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"machine_depth": { "default_value": 175 },
|
||||
"machine_end_gcode": { "default_value": "; -- END GCODE --\nG91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z0.5 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-26, 34],
|
||||
[-26, -32],
|
||||
[32, -32],
|
||||
[32, 34]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 165 },
|
||||
"machine_name": { "default_value": "Creality Sermoon V1" },
|
||||
"machine_start_gcode": { "default_value": "; -- START GCODE --\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y170.0 Z0.28 F1500.0 E12 ;Draw the first line\nG1 X10.4 Y170.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E25 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up" },
|
||||
"machine_width": { "default_value": 175 }
|
||||
}
|
||||
}
|
||||
27
resources/definitions/dxu_umo.def.json
Normal file
27
resources/definitions/dxu_umo.def.json
Normal file
|
|
@ -0,0 +1,27 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "UMO+ DXU",
|
||||
"inherits": "dxu",
|
||||
"overrides": {
|
||||
"machine_disallowed_areas": {
|
||||
"default_value": [
|
||||
[[100, -102.5], [ 110, -102.5], [ 110, -62.5], [100, -62.5]]
|
||||
]
|
||||
},
|
||||
"machine_width": { "default_value": 220 },
|
||||
"machine_depth": { "default_value": 205 },
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_nozzle_heat_up_speed": {
|
||||
"default_value": 1.95
|
||||
},
|
||||
"machine_nozzle_cool_down_speed": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"machine_start_gcode" : {
|
||||
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"; Script based on an original created by tjjfvi (https://github.com/tjjfvi)\\n; An up-to-date version of the tjjfvi's original script can be found\\n; here: https://csi.t6.fyi/\\n; Note - This script will only work in Cura V4.2 and above!\\n; --- Global Settings\\n; layer_height = {layer_height}\\n; smooth_spiralized_contours = {smooth_spiralized_contours}\\n; magic_mesh_surface_mode = {magic_mesh_surface_mode}\\n; machine_extruder_count = {machine_extruder_count}\\n; --- Single Extruder Settings\\n; speed_z_hop = {speed_z_hop}\\n; retraction_amount = {retraction_amount}\\n; retraction_hop = {retraction_hop}\\n; retraction_hop_enabled = {retraction_hop_enabled}\\n; retraction_enable = {retraction_enable}\\n; retraction_speed = {retraction_speed}\\n; retraction_retract_speed = {retraction_retract_speed}\\n; retraction_prime_speed = {retraction_prime_speed}\\n; speed_travel = {speed_travel}\\n\\nM355 S1 P25;turn on case light\\n\\n;material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T{initial_extruder_nr} ;reset filament diameter\\nG28 ;home all\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM104 T{initial_extruder_nr} S{material_standby_temperature, initial_extruder_nr}\\nG0 X25 Y20 F7200 ;change Y20 to Y0 ansonl\\nG0 Z20 F2400\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nG0 X210 Y0 F7200\\nG92 E-12.0 ; increase purge 6.5 to 12\\nG1 E0 F200 ;purge nozzle ;change F45 to F200 like ultimaker code ansonl\\nG1 E-6.5 F1500\\nG1 E0 F1500\\nG1 Y50 F9000 ;add quick movement to Y50 like ultimaker code ansonl\\nM400 ;finish all moves\\nT{initial_extruder_nr}\\n;end of startup sequence\\n\\nM355 S1 P50;turn on case light\""
|
||||
},
|
||||
"machine_end_gcode" : {
|
||||
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \";end code from UM3\\nG91 ;Relative movement\\nG0 F15000 X8.0 Y8.0 Z3.5 E-4.5 ;Wiping+material retraction ;increase bed lower 0.5>5.0 and add Y movement\\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\\nG90 ;Disable relative movement\\n\\nG90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\\nM355 S0 ;turn off case light\""
|
||||
}
|
||||
}
|
||||
}
|
||||
33
resources/definitions/dxu_umo_dual.def.json
Normal file
33
resources/definitions/dxu_umo_dual.def.json
Normal file
|
|
@ -0,0 +1,33 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "UMO+ DXU Dual",
|
||||
"inherits": "dxu_dual",
|
||||
"overrides": {
|
||||
"machine_disallowed_areas": {
|
||||
"default_value": [
|
||||
[[100, -102.5], [ 110, -102.5], [ 110, -62.5], [100, -62.5]]
|
||||
]
|
||||
},
|
||||
"machine_width": { "default_value": 220 },
|
||||
"machine_depth": { "default_value": 205 },
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_nozzle_heat_up_speed": {
|
||||
"default_value": 1.95
|
||||
},
|
||||
"machine_nozzle_cool_down_speed": {
|
||||
"default_value": 0.8
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"machine_start_gcode" : {
|
||||
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"; Script based on an original created by tjjfvi (https://github.com/tjjfvi)\\n; An up-to-date version of the tjjfvi's original script can be found\\n; here: https://csi.t6.fyi/\\n; Note - This script will only work in Cura V4.2 and above!\\n; --- Global Settings\\n; layer_height = {layer_height}\\n; smooth_spiralized_contours = {smooth_spiralized_contours}\\n; magic_mesh_surface_mode = {magic_mesh_surface_mode}\\n; machine_extruder_count = {machine_extruder_count}\\n; --- Single Extruder Settings\\n; speed_z_hop = {speed_z_hop}\\n; retraction_amount = {retraction_amount}\\n; retraction_hop = {retraction_hop}\\n; retraction_hop_enabled = {retraction_hop_enabled}\\n; retraction_enable = {retraction_enable}\\n; retraction_speed = {retraction_speed}\\n; retraction_retract_speed = {retraction_retract_speed}\\n; retraction_prime_speed = {retraction_prime_speed}\\n; speed_travel = {speed_travel}\\n; --- Multi-Extruder Settings\\n; speed_z_hop_0 = {speed_z_hop, 0}\\n; speed_z_hop_1 = {speed_z_hop, 1}\\n; retraction_amount_0 = {retraction_amount, 0}\\n; retraction_amount_1 = {retraction_amount, 1}\\n; retraction_hop_0 = {retraction_hop, 0}\\n; retraction_hop_1 = {retraction_hop, 1}\\n; retraction_hop_enabled_0 = {retraction_hop_enabled, 0}\\n; retraction_hop_enabled_1 = {retraction_hop_enabled, 1}\\n; retraction_prime_speed_0 = {retraction_prime_speed, 0}\\n; retraction_prime_speed_1 = {retraction_prime_speed, 1}\\n; retraction_retract_speed_0 = {retraction_retract_speed, 0}\\n; retraction_retract_speed_1 = {retraction_retract_speed, 1}\\n; retraction_speed_0 = {retraction_speed, 0}\\n; retraction_speed_1 = {retraction_speed, 1}\\n; retraction_enable_0 = {retraction_enable, 0}\\n; retraction_enable_1 = {retraction_enable, 1}\\n; speed_travel_0 = {speed_travel, 0}\\n; speed_travel_1 = {speed_travel, 1}\\n\\nM355 S1 P25;turn on case light\\n\\n;material_bed_temperature={material_bed_temperature} material_print_temperature={material_print_temperature} material_print_temperature_layer_0={material_print_temperature_layer_0}\\nM190 S{material_bed_temperature_layer_0}\\nM104 T0 S{material_standby_temperature, 0}\\nM104 T0 S{material_print_temperature_layer_0, 0}\\nG21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nM200 D0 T0 ;reset filament diameter\\nM200 D0 T1\\nG28 ;home all\\nT1 ; move to the nozzle 2\\nG0 Z20 F2400 ;move the platform to 30mm\\nM109 T1 S{material_print_temperature_layer_0, 1}\\nG0 X210 Y0 F7200 ;change Y20 to Y0 ansonl\\nG92 E0\\nG92 E-12.0 ;prime distance ;increase purge 6.5 to 12\\nG1 E0 F200 ;purge nozzle ;change F45 to F200 like ultimaker code ansonl\\nG1 E-6.5 F1500 ; retract\\nT0 ; move to the nozzle 1\\nM104 T1 S{material_standby_temperature, 1}\\nG0 Z20 F2400\\nM109 T0 S{material_print_temperature_layer_0, 0}\\nG0 X210 Y0 F7200 ;change Y20 to Y0 ansonl\\nG92 E0\\nG92 E-12.0\\nG1 E0 F200 ;purge nozzle\\nG1 E-6.5 F1500\\nM104 T0 S{material_standby_temperature, 0}\\nT{initial_extruder_nr} ;switch to the first nozzle used for print\\nM109 T{initial_extruder_nr} S{material_print_temperature_layer_0, initial_extruder_nr}\\nM400 ;finish all moves\\nG1 E0 F1500\\nG92 E0\\nG1 Y100 F9000 ;add quick movement to Y50 like ultimaker code ansonl\\n;end of startup sequence\\n\\nM355 S1 P50;turn on case light\""
|
||||
},
|
||||
"machine_end_gcode" : {
|
||||
"value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \";end code from UM3\\nG91 ;Relative movement\\nG0 F15000 X8.0 Y8.0 Z3.5 E-4.5 ;Wiping+material retraction ;increase bed lower 0.5>5.0 and add Y movement\\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\\nG90 ;Disable relative movement\\n\\nG90 ;absolute positioning\\nM104 S0 T0 ;extruder heater off\\nM104 S0 T1\\nM140 S0 ;turn off bed\\nT0 ; move to the first head\\nM107 ;fan off\\nM355 S0 ;turn off case light\""
|
||||
}
|
||||
}
|
||||
}
|
||||
File diff suppressed because it is too large
Load diff
|
|
@ -106,7 +106,7 @@
|
|||
"support_type": {"value": "'everywhere'" },
|
||||
"support_angle": {"value": "50"},
|
||||
"support_pattern": {"value": "'grid'"},
|
||||
"support_wall_count": {"value": 0},
|
||||
"support_wall_count": {"value": "1 if (support_structure == 'tree') else 0" },
|
||||
"zig_zaggify_support": {"value": false },
|
||||
"support_infill_rate": {"value": "15 if support_enable else 0"},
|
||||
"support_brim_enable": {"value": true },
|
||||
|
|
|
|||
|
|
@ -130,7 +130,7 @@
|
|||
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
||||
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
|
||||
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
|
||||
"support_wall_count": { "value": 0 },
|
||||
"support_wall_count": {"value": "1 if (support_structure == 'tree') else 0" },
|
||||
"support_brim_enable": { "value": true },
|
||||
"support_brim_width": { "value": 4 },
|
||||
"support_interface_height": { "value": "layer_height * 4" },
|
||||
|
|
|
|||
|
|
@ -93,7 +93,7 @@
|
|||
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
||||
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
|
||||
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
|
||||
"support_wall_count": { "value": 0 },
|
||||
"support_wall_count": {"value": "1 if (support_structure == 'tree') else 0" },
|
||||
"support_brim_enable": { "value": true },
|
||||
"support_brim_width": { "value": 5 },
|
||||
|
||||
|
|
|
|||
|
|
@ -2,299 +2,129 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"visible": false,
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"visible": false,
|
||||
"exclude_materials": [ "generic_hips", "structur3d_dap100silicone" ]
|
||||
"exclude_materials": [
|
||||
"generic_hips",
|
||||
"structur3d_dap100silicone"
|
||||
]
|
||||
},
|
||||
"overrides": {
|
||||
"machine_max_feedrate_e": {
|
||||
"default_value": 45
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
||||
"acceleration_travel_enabled": { "value": false },
|
||||
"bottom_layers": { "value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))" },
|
||||
"bridge_enable_more_layers": { "value": false },
|
||||
"bridge_fan_speed": { "value": "cool_fan_speed_max" },
|
||||
"bridge_fan_speed_2": { "value": "cool_fan_speed_min" },
|
||||
"bridge_fan_speed_3": { "value": "cool_fan_speed_min" },
|
||||
"bridge_settings_enabled": { "value": true },
|
||||
"bridge_skin_density": { "value": "80" },
|
||||
"bridge_skin_density_2": { "value": 100 },
|
||||
"bridge_skin_density_3": { "value": 100 },
|
||||
"bridge_skin_material_flow": { "value": "skin_material_flow" },
|
||||
"bridge_skin_material_flow_2": { "value": "skin_material_flow" },
|
||||
"bridge_skin_material_flow_3": { "value": "skin_material_flow" },
|
||||
"bridge_skin_speed": { "value": "speed_topbottom" },
|
||||
"bridge_skin_speed_2": { "value": "speed_topbottom" },
|
||||
"bridge_skin_speed_3": { "value": "speed_topbottom" },
|
||||
"bridge_skin_support_threshold": { "value": 50 },
|
||||
"bridge_sparse_infill_max_density": { "value": 0 },
|
||||
"bridge_wall_coast": { "value": 0 },
|
||||
"bridge_wall_material_flow": { "value": "wall_material_flow" },
|
||||
"bridge_wall_speed": { "value": "bridge_skin_speed" },
|
||||
"cool_fan_speed_0": { "value": "cool_fan_speed_min" },
|
||||
"gradual_support_infill_step_height": { "value": "4 * layer_height" },
|
||||
"gradual_support_infill_steps": { "value": "2 if support_interface_enable else 0" },
|
||||
"infill_material_flow": { "value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow" },
|
||||
"inset_direction": { "value": "'outside_in'" },
|
||||
"jerk_infill": { "minimum_value_warning": 20 },
|
||||
"jerk_prime_tower": { "minimum_value_warning": 20 },
|
||||
"jerk_print":
|
||||
{
|
||||
"minimum_value_warning": 20,
|
||||
"value": "20"
|
||||
},
|
||||
"material_print_temperature": {
|
||||
"jerk_print_layer_0": { "value": "max(20, jerk_wall_0)" },
|
||||
"jerk_roofing": { "minimum_value_warning": 20 },
|
||||
"jerk_support": { "minimum_value_warning": 20 },
|
||||
"jerk_support_infill": { "minimum_value_warning": 20 },
|
||||
"jerk_support_interface": { "minimum_value_warning": 20 },
|
||||
"jerk_topbottom": { "minimum_value_warning": 20 },
|
||||
"jerk_travel": { "value": "jerk_print" },
|
||||
"jerk_travel_enabled": { "value": false },
|
||||
"jerk_wall": { "minimum_value_warning": 20 },
|
||||
"jerk_wall_0": { "minimum_value_warning": 20 },
|
||||
"layer_height_0": { "value": "max(0.2, layer_height)" },
|
||||
"line_width": { "value": "machine_nozzle_size" },
|
||||
"machine_max_feedrate_e": { "default_value": 45 },
|
||||
"material_bed_temperature":
|
||||
{
|
||||
"maximum_value_warning": "125",
|
||||
"minimum_value": "0"
|
||||
},
|
||||
"material_bed_temperature": {
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "125"
|
||||
},
|
||||
"material_bed_temperature_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "125"
|
||||
},
|
||||
"material_standby_temperature": {
|
||||
"value": "material_print_temperature - 100",
|
||||
"minimum_value": "0"
|
||||
},
|
||||
"extruder_prime_pos_y":
|
||||
"material_bed_temperature_layer_0": { "maximum_value_warning": "125" },
|
||||
"material_print_temperature": { "minimum_value": "0" },
|
||||
"material_standby_temperature":
|
||||
{
|
||||
"minimum_value": "0",
|
||||
"maximum_value": "machine_depth"
|
||||
},
|
||||
"extruder_prime_pos_x":
|
||||
{
|
||||
"minimum_value": "0",
|
||||
"maximum_value": "machine_width"
|
||||
"value": "material_print_temperature - 100"
|
||||
},
|
||||
"meshfix_maximum_deviation": { "value": "machine_nozzle_size / 10" },
|
||||
"meshfix_maximum_resolution": { "value": "max(speed_wall_0 / 75, 0.5)" },
|
||||
"minimum_support_area": { "value": "4.0" },
|
||||
"raft_base_speed": { "value": "raft_speed" },
|
||||
"raft_base_thickness": { "value": "min(machine_nozzle_size * 0.75, 0.3)" },
|
||||
"raft_interface_fan_speed": { "value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2" },
|
||||
"raft_interface_line_width": { "value": "(raft_base_line_width + raft_surface_line_width) / 2" },
|
||||
"raft_interface_speed": { "value": "(raft_surface_speed + raft_base_speed) / 2" },
|
||||
"raft_interface_thickness": { "value": "(raft_base_thickness + raft_surface_thickness) / 2" },
|
||||
"raft_speed": { "value": 15 },
|
||||
"raft_surface_fan_speed": { "value": "cool_fan_speed_min" },
|
||||
"raft_surface_speed": { "value": "speed_topbottom" },
|
||||
"relative_extrusion":
|
||||
{
|
||||
"value": false,
|
||||
"enabled": false
|
||||
},
|
||||
"skin_angles": {
|
||||
"value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]"
|
||||
},
|
||||
"line_width": {
|
||||
"value": "machine_nozzle_size"
|
||||
},
|
||||
"wall_thickness": {
|
||||
"value": "wall_line_width_0 + wall_line_width_x"
|
||||
},
|
||||
"infill_material_flow": {
|
||||
"value": "(1.95-infill_sparse_density / 100 if infill_sparse_density > 95 else 1) * material_flow"
|
||||
},
|
||||
"inset_direction": {
|
||||
"value": "'outside_in'"
|
||||
},
|
||||
"retraction_combing": {
|
||||
"value": "'no_outer_surfaces'"
|
||||
},
|
||||
"retraction_count_max": {
|
||||
"value": 25
|
||||
},
|
||||
"retraction_extrusion_window": {
|
||||
"value": 1
|
||||
},
|
||||
"roofing_layer_count": {
|
||||
"value": "1"
|
||||
},
|
||||
"roofing_material_flow": {
|
||||
"value": "material_flow"
|
||||
},
|
||||
"skin_material_flow": {
|
||||
"value": "0.95 * material_flow"
|
||||
},
|
||||
"support_interface_material_flow": {
|
||||
"value": "skin_material_flow"
|
||||
},
|
||||
"skin_monotonic" : {
|
||||
"value": "roofing_layer_count == 0"
|
||||
},
|
||||
"speed_equalize_flow_width_factor": {
|
||||
"value": "110.0"
|
||||
},
|
||||
"top_layers": {
|
||||
"value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))"
|
||||
},
|
||||
"bottom_layers": {
|
||||
"value": "math.ceil(round(bottom_thickness / resolveOrValue('layer_height'), 4))"
|
||||
},
|
||||
"xy_offset": {
|
||||
"value": "-layer_height * 0.1"
|
||||
},
|
||||
"meshfix_maximum_resolution": {
|
||||
"value": "max(speed_wall_0 / 75, 0.5)"
|
||||
},
|
||||
"meshfix_maximum_deviation": {
|
||||
"value": "machine_nozzle_size / 10"
|
||||
},
|
||||
"jerk_travel_enabled": {
|
||||
"enabled": false,
|
||||
"value": false
|
||||
},
|
||||
"acceleration_travel_enabled": {
|
||||
"value": false
|
||||
},
|
||||
"acceleration_travel": {
|
||||
"value": "acceleration_wall"
|
||||
},
|
||||
"skin_edge_support_thickness": {
|
||||
"value": "4 * layer_height if infill_sparse_density < 30 else 0"
|
||||
},
|
||||
"bridge_settings_enabled": {
|
||||
"value": true
|
||||
},
|
||||
"bridge_skin_support_threshold": {
|
||||
"value": 50
|
||||
},
|
||||
"bridge_sparse_infill_max_density": {
|
||||
"value": 0
|
||||
},
|
||||
"bridge_wall_coast": {
|
||||
"value": 0
|
||||
},
|
||||
"bridge_wall_speed": {
|
||||
"value": "bridge_skin_speed"
|
||||
},
|
||||
"bridge_wall_material_flow": {
|
||||
"value": "wall_material_flow"
|
||||
},
|
||||
"bridge_skin_speed": {
|
||||
"value": "speed_topbottom"
|
||||
},
|
||||
"bridge_skin_material_flow": {
|
||||
"value": "skin_material_flow"
|
||||
},
|
||||
"bridge_skin_density": {
|
||||
"value": "80"
|
||||
},
|
||||
"bridge_fan_speed": {
|
||||
"value": "cool_fan_speed_max"
|
||||
},
|
||||
"bridge_enable_more_layers": {
|
||||
"value": false
|
||||
},
|
||||
"bridge_skin_speed_2": {
|
||||
"value": "speed_topbottom"
|
||||
},
|
||||
"bridge_skin_material_flow_2": {
|
||||
"value": "skin_material_flow"
|
||||
},
|
||||
"bridge_skin_density_2": {
|
||||
"value": 100
|
||||
},
|
||||
"bridge_fan_speed_2": {
|
||||
"value": "cool_fan_speed_min"
|
||||
},
|
||||
"bridge_skin_speed_3": {
|
||||
"value": "speed_topbottom"
|
||||
},
|
||||
"bridge_skin_material_flow_3": {
|
||||
"value": "skin_material_flow"
|
||||
},
|
||||
"bridge_skin_density_3": {
|
||||
"value": 100
|
||||
},
|
||||
"bridge_fan_speed_3": {
|
||||
"value": "cool_fan_speed_min"
|
||||
},
|
||||
"jerk_print": {
|
||||
"value": "20",
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_infill": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_wall": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_wall_0": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_roofing": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_topbottom": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_support": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_support_infill": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_support_interface": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_prime_tower": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_layer_0": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_print_layer_0": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_travel": {
|
||||
"value": "jerk_print",
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_travel_layer_0": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"jerk_skirt_brim": {
|
||||
"minimum_value_warning": 20
|
||||
},
|
||||
"support_wall_count": {
|
||||
"value": "1 if support_structure == 'tree' else 0"
|
||||
},
|
||||
"zig_zaggify_support": {
|
||||
"value": true
|
||||
},
|
||||
"support_infill_rate": {
|
||||
"value": "0 if support_structure == 'tree' else 80 if gradual_support_infill_steps != 0 else 15"
|
||||
},
|
||||
"support_line_distance": {
|
||||
"minimum_value_warning": "0 if support_structure == 'tree' else support_line_width"
|
||||
},
|
||||
"support_initial_layer_line_distance": {
|
||||
"minimum_value_warning": "0 if support_structure == 'tree' else support_line_width"
|
||||
},
|
||||
"gradual_support_infill_steps": {
|
||||
"value": "2 if support_interface_enable else 0"
|
||||
},
|
||||
"gradual_support_infill_step_height": {
|
||||
"value": "4 * layer_height"
|
||||
},
|
||||
"raft_base_speed": {
|
||||
"value": "raft_speed"
|
||||
},
|
||||
"raft_base_thickness": {
|
||||
"value": "min(machine_nozzle_size * 0.75, 0.3)"
|
||||
},
|
||||
"raft_interface_fan_speed": {
|
||||
"value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2"
|
||||
},
|
||||
"raft_interface_line_width": {
|
||||
"value": "(raft_base_line_width + raft_surface_line_width) / 2"
|
||||
},
|
||||
"raft_interface_speed": {
|
||||
"value": "(raft_surface_speed + raft_base_speed) / 2"
|
||||
},
|
||||
"raft_interface_thickness": {
|
||||
"value": "(raft_base_thickness + raft_surface_thickness) / 2"
|
||||
},
|
||||
"raft_speed": {
|
||||
"value": 15
|
||||
},
|
||||
"raft_surface_fan_speed": {
|
||||
"value": "cool_fan_speed"
|
||||
},
|
||||
"raft_surface_speed": {
|
||||
"value": "speed_topbottom"
|
||||
},
|
||||
"support_interface_height": {
|
||||
"value": "2 * layer_height"
|
||||
},
|
||||
"support_offset": {
|
||||
"value": "support_xy_distance if support_interface_enable else 0"
|
||||
},
|
||||
"support_xy_distance": {
|
||||
"value": "1"
|
||||
},
|
||||
"support_xy_distance_overhang": {
|
||||
"value": "0.2"
|
||||
},
|
||||
"minimum_support_area": {
|
||||
"value": "(2 + support_offset)**2"
|
||||
},
|
||||
"support_interface_skip_height": {
|
||||
"value": "layer_height"
|
||||
},
|
||||
"support_interface_pattern": {
|
||||
"value": "'concentric'"
|
||||
},
|
||||
"support_interface_offset": {
|
||||
"value": "support_offset"
|
||||
},
|
||||
"support_use_towers": {
|
||||
"value": false
|
||||
},
|
||||
"support_z_distance": {
|
||||
"value": "0"
|
||||
},
|
||||
"top_bottom_pattern": {
|
||||
"value": "'zigzag'"
|
||||
}
|
||||
"retraction_combing": { "value": "'no_outer_surfaces'" },
|
||||
"retraction_combing_max_distance": { "value": 15 },
|
||||
"retraction_count_max": { "value": 25 },
|
||||
"retraction_extrusion_window": { "value": 1 },
|
||||
"roofing_layer_count": { "value": "1" },
|
||||
"roofing_material_flow": { "value": "material_flow" },
|
||||
"skin_angles": { "value": "[] if infill_pattern not in ['cross', 'cross_3d'] else [20, 110]" },
|
||||
"skin_edge_support_thickness": { "value": "4 * layer_height if infill_sparse_density < 30 else 0" },
|
||||
"skin_material_flow": { "value": "0.95 * material_flow" },
|
||||
"skin_material_flow_layer_0": { "value": "0.85 * material_flow_layer_0" },
|
||||
"skin_monotonic": { "value": "roofing_layer_count == 0" },
|
||||
"speed_equalize_flow_width_factor": { "value": "110.0" },
|
||||
"speed_layer_0": { "value": "min(30, layer_height / layer_height_0 * speed_wall_0)" },
|
||||
"speed_slowdown_layers": { "value": 1 },
|
||||
"speed_travel_layer_0": { "value": "speed_travel" },
|
||||
"support_infill_rate": { "value": "0 if support_structure == 'tree' else 80 if gradual_support_infill_steps != 0 else 15" },
|
||||
"support_initial_layer_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" },
|
||||
"support_interface_height": { "value": "2 * layer_height" },
|
||||
"support_interface_material_flow": { "value": "skin_material_flow" },
|
||||
"support_interface_offset": { "value": "support_offset" },
|
||||
"support_interface_pattern": { "value": "'zigzag'" },
|
||||
"support_interface_skip_height": { "value": "layer_height" },
|
||||
"support_line_distance": { "minimum_value_warning": "0 if support_structure == 'tree' else support_line_width" },
|
||||
"support_offset": { "value": "support_xy_distance if support_interface_enable else 0" },
|
||||
"support_use_towers": { "value": false },
|
||||
"support_wall_count": { "value": "1 if support_structure == 'tree' else 0" },
|
||||
"support_xy_distance": { "value": "1" },
|
||||
"support_xy_distance_overhang": { "value": "0.2" },
|
||||
"support_z_distance": { "value": "0" },
|
||||
"top_layers": { "value": "math.ceil(round(top_thickness / resolveOrValue('layer_height'), 4))" },
|
||||
"wall_0_material_flow_layer_0": { "value": "1.10 * material_flow_layer_0" },
|
||||
"wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" },
|
||||
"wall_x_material_flow_layer_0": { "value": "0.95 * material_flow_layer_0" },
|
||||
"xy_offset": { "value": "-layer_height * 0.1" },
|
||||
"xy_offset_layer_0": { "value": "-wall_line_width_0 / 5 + xy_offset" },
|
||||
"zig_zaggify_support": { "value": true }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -89,6 +89,15 @@
|
|||
},
|
||||
"support_z_distance": {
|
||||
"value": "0.1"
|
||||
},
|
||||
"cool_fan_speed_0": {
|
||||
"value": 0
|
||||
},
|
||||
"layer_height_0": {
|
||||
"value": 0.3
|
||||
},
|
||||
"speed_slowdown_layers": {
|
||||
"value": 2
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -70,7 +70,6 @@
|
|||
"maximum_value": 260
|
||||
},
|
||||
"material_print_temperature_layer_0": {
|
||||
"value": "material_print_temperature",
|
||||
"maximum_value": 260
|
||||
},
|
||||
"machine_start_gcode": { "value": "''" },
|
||||
|
|
|
|||
|
|
@ -82,7 +82,6 @@
|
|||
|
||||
"prime_blob_enable": { "enabled": true, "default_value": true, "value": "resolveOrValue('print_sequence') != 'one_at_a_time'" },
|
||||
"acceleration_enabled": { "value": true },
|
||||
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
||||
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
"acceleration_print": { "value": "3500" },
|
||||
"acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
|
|
@ -91,21 +90,17 @@
|
|||
"acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" },
|
||||
"acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 3500)" },
|
||||
"brim_width": { "value": "3" },
|
||||
"cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" },
|
||||
"cool_fan_speed": { "value": "50" },
|
||||
"cool_fan_speed_max": { "value": "100" },
|
||||
"cool_min_speed": { "value": "5" },
|
||||
"infill_overlap": { "value": "0" },
|
||||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"initial_layer_line_width_factor": { "value": "120" },
|
||||
"jerk_enabled": { "value": "True" },
|
||||
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
||||
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
||||
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
"default_material_print_temperature": { "value": "200" },
|
||||
"material_print_temperature_layer_0": { "value": "material_print_temperature + 5" },
|
||||
"material_bed_temperature": { "maximum_value": "115" },
|
||||
"material_bed_temperature_layer_0": { "maximum_value": "115" },
|
||||
"multiple_mesh_overlap": { "value": "0" },
|
||||
|
|
@ -118,7 +113,6 @@
|
|||
"retraction_min_travel": { "value": "5" },
|
||||
"retraction_prime_speed": { "value": "15" },
|
||||
"skin_overlap": { "value": "10" },
|
||||
"speed_layer_0": { "value": "20" },
|
||||
"speed_prime_tower": { "value": "speed_topbottom" },
|
||||
"speed_print": { "value": "35" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
|
|
|
|||
|
|
@ -62,6 +62,15 @@
|
|||
},
|
||||
"infill_before_walls": {
|
||||
"value": "False"
|
||||
},
|
||||
"cool_fan_speed_0": {
|
||||
"value": 0
|
||||
},
|
||||
"layer_height_0": {
|
||||
"value": 0.3
|
||||
},
|
||||
"speed_slowdown_layers": {
|
||||
"value": 2
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -74,8 +74,6 @@
|
|||
"maximum_value": "150",
|
||||
"value": "150"
|
||||
},
|
||||
|
||||
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
||||
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
"acceleration_print": { "value": "3500" },
|
||||
"acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
|
|
@ -84,7 +82,6 @@
|
|||
"acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" },
|
||||
"acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" },
|
||||
"brim_width": { "value": "3" },
|
||||
"cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" },
|
||||
"cool_fan_speed": { "value": "50" },
|
||||
"cool_fan_speed_max": { "value": "100" },
|
||||
"cool_min_speed": { "value": "5" },
|
||||
|
|
@ -92,7 +89,6 @@
|
|||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"jerk_enabled": { "value": "True" },
|
||||
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
||||
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
||||
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
|
|
@ -108,7 +104,6 @@
|
|||
"retraction_prime_speed": { "value": "15" },
|
||||
"retraction_speed": {"value": "45" },
|
||||
"skin_overlap": { "value": "10" },
|
||||
"speed_layer_0": { "value": "20" },
|
||||
"speed_prime_tower": { "value": "speed_topbottom" },
|
||||
"speed_print": { "value": "35" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
|
|
@ -123,7 +118,6 @@
|
|||
"top_bottom_thickness": { "value": "1" },
|
||||
"travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
|
||||
"wall_0_inset": { "value": "0" },
|
||||
"initial_layer_line_width_factor": { "value": "120" },
|
||||
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
|
||||
}
|
||||
}
|
||||
|
|
|
|||
|
|
@ -77,7 +77,6 @@
|
|||
"value": "150"
|
||||
},
|
||||
"acceleration_enabled": { "value": true },
|
||||
"acceleration_layer_0": { "value": "acceleration_topbottom" },
|
||||
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
"acceleration_print": { "value": "3500" },
|
||||
"acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
|
|
@ -86,7 +85,6 @@
|
|||
"acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" },
|
||||
"acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" },
|
||||
"brim_width": { "value": "3" },
|
||||
"cool_fan_full_at_height": { "value": "layer_height_0 + 4 * layer_height" },
|
||||
"cool_fan_speed": { "value": "50" },
|
||||
"cool_fan_speed_max": { "value": "100" },
|
||||
"cool_min_speed": { "value": "5" },
|
||||
|
|
@ -94,7 +92,6 @@
|
|||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"jerk_enabled": { "value": "True" },
|
||||
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
||||
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
||||
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
|
|
@ -110,7 +107,6 @@
|
|||
"retraction_prime_speed": { "value": "15" },
|
||||
"retraction_speed": {"value": "45" },
|
||||
"skin_overlap": { "value": "10" },
|
||||
"speed_layer_0": { "value": "20" },
|
||||
"speed_prime_tower": { "value": "speed_topbottom" },
|
||||
"speed_print": { "value": "35" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
|
|
@ -126,7 +122,6 @@
|
|||
"travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
|
||||
"wall_0_inset": { "value": "0" },
|
||||
"optimize_wall_printing_order": { "value": "True" },
|
||||
"initial_layer_line_width_factor": { "value": "120" },
|
||||
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },
|
||||
"build_volume_temperature": { "maximum_value": 50 }
|
||||
}
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue