3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-08-08 22:35:03 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 6

Merge branch 'Ultimaker:master' into master

Browse source
This commit is contained in:
x40-Community 2021-08-01 19:58:56 +02:00 • committed by GitHub
commit 2e20ebbbd2
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
144 changed files with 1930 additions and 111 deletions
Download patch file Download diff file Expand all files Collapse all files

2
resources/definitions/biqu_bx_abl.def.json
View file

@ -43,7 +43,7 @@
]
},
"machine_start_gcode": {
"default_value": "; BIQU BX Start G-code\r\n; For inforation on how to tune this profile and get the\r\n; most out of your BX visit: https:\/\/github.com\/looxonline\/Marlin\r\n; For the official github site visit: https:\/\/github.com\/bigtreetech\/BIQU-BX\r\n\r\nM117 Initial homing sequence. ; Home so that the probe is positioned to heat\r\nG28\r\n\r\nM117 Probe heating position\r\nG0 X65 Y5 Z1 ; Move the probe to the heating position.\r\n\r\nM117 Getting the heaters up to temp!\r\nM104 S140 ; Set Extruder temperature, no wait\r\nM140 S60 ; Set Heat Bed temperature\r\nM190 S60 ; Wait for Heat Bed temperature\r\n\r\nM117 Waiting for probe to warm! ; Wait another 90s for the probe to absorb heat.\r\nG4 S90 \r\n\r\nM117 Post warming re-home\r\nG28 ; Home all axes again after warming\r\n\r\nM117 Z-Dance of my people\r\nG34\r\n\r\nM117 ABL Probing\r\nG29\r\n\r\nM900 K0 L0 T0 ;Edit the K and L values if you have calibrated a k factor for your filament\r\nM900 T0 S0\r\n\r\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\r\nG1 X4.1 Y10 Z0.3 F5000.0 ; Move to start position\r\n\r\nM117 Getting the extruder up to temp\r\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\r\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\r\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\r\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\r\n\r\nG92 E0 ; Reset Extruder\r\nM117 Purging\r\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\r\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\r\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\r\nG92 E0 ; Reset Extruder\r\nM117 Lets make\r\nG1 X8 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"
"default_value": "; BIQU BX Start G-code\r\n; For information on how to tune this profile and get the\r\n; most out of your BX visit: https:\/\/github.com\/looxonline\/Marlin\r\n; For the official github site visit: https:\/\/github.com\/bigtreetech\/BIQU-BX\r\n\r\nM117 Initial homing sequence. ; Home so that the probe is positioned to heat\r\nG28\r\n\r\nM117 Probe heating position\r\nG0 X65 Y5 Z1 ; Move the probe to the heating position.\r\n\r\nM117 Getting the heaters up to temp!\r\nM104 S140 ; Set Extruder temperature, no wait\r\nM140 S60 ; Set Heat Bed temperature\r\nM190 S60 ; Wait for Heat Bed temperature\r\n\r\nM117 Waiting for probe to warm! ; Wait another 90s for the probe to absorb heat.\r\nG4 S90 \r\n\r\nM117 Post warming re-home\r\nG28 ; Home all axes again after warming\r\n\r\nM117 Z-Dance of my people\r\nG34\r\n\r\nM117 ABL Probing\r\nG29\r\n\r\nM900 K0 L0 T0 ;Edit the K and L values if you have calibrated a k factor for your filament\r\nM900 T0 S0\r\n\r\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\r\nG1 X4.1 Y10 Z0.3 F5000.0 ; Move to start position\r\n\r\nM117 Getting the extruder up to temp\r\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\r\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\r\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\r\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\r\n\r\nG92 E0 ; Reset Extruder\r\nM117 Purging\r\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\r\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\r\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\r\nG92 E0 ; Reset Extruder\r\nM117 Lets make\r\nG1 X8 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"
},
"gantry_height": { "value": 27.5 }

279
resources/definitions/kingroon_base.def.json Normal file
View file

@ -0,0 +1,279 @@
{
"name": "Kingroon Base Printer",
"version": 2,
"inherits": "fdmprinter",
"metadata": {
"visible": false,
"author": "notamu",
"manufacturer": "Kingroon",
"file_formats": "text/x-gcode",
"first_start_actions": ["MachineSettingsAction"],
"machine_extruder_trains": {
"0": "kingroon_base_extruder_0"
},
"has_materials": true,
"has_variants": true,
"has_machine_quality": true,
"variants_name": "Nozzle Size",
"preferred_variant_name": "0.4mm Nozzle",
"preferred_quality_type": "standard",
"preferred_material": "generic_pla",
"exclude_materials": [
"3D-Fuel_PLA_PRO_Black",
"3D-Fuel_PLA_SnapSupport",
"bestfilament_abs_skyblue",
"bestfilament_petg_orange",
"bestfilament_pla_green",
"chromatik_pla",
"dsm_arnitel2045_175",
"dsm_novamid1070_175",
"emotiontech_abs",
"emotiontech_absx",
"emotiontech_acetate",
"emotiontech_asax",
"emotiontech_copa",
"emotiontech_nylon_1030",
"emotiontech_nylon_1030cf",
"emotiontech_nylon_1070",
"emotiontech_pc",
"emotiontech_petg",
"emotiontech_pla",
"emotiontech_pla_hr_870",
"emotiontech_bvoh",
"emotiontech_hips",
"emotiontech_pva-m",
"emotiontech_pva-s",
"emotiontech_tpu98a",
"eSUN_PLA_PRO_White",
"eSUN_PETG_Black",
"eSUN_PETG_Grey",
"eSUN_PETG_Purple",
"eSUN_PLA_PRO_Black",
"eSUN_PLA_PRO_Grey",
"eSUN_PLA_PRO_Purple",
"fabtotum_abs",
"fabtotum_nylon",
"fabtotum_pla",
"fabtotum_tpu",
"fdplast_pla_olive",
"fdplast_abs_tomato",
"fdplast_petg_gray",
"fiberlogy_hd_pla",
"filo3d_pla",
"filo3d_pla_green",
"filo3d_pla_red",
"generic_cpe_175",
"generic_hips_175",
"generic_nylon_175",
"generic_pc_175",
"generic_pva_175",
"imade3d_petg_175",
"imade3d_pla_175",
"innofill_innoflex60_175",
"layer_one_white_pla",
"layer_one_black_pla",
"layer_one_dark_gray_pla",
"leapfrog_pva_natural",
"leapfrog_abs_natural",
"leapfrog_epla_natural",
"octofiber_pla",
"polyflex_pla",
"polymax_pla",
"polyplus_pla",
"polywood_pla",
"redd_tpe",
"redd_abs",
"redd_asa",
"redd_hips",
"redd_nylon",
"redd_petg",
"redd_pla",
"tizyx_flex",
"tizyx_petg",
"tizyx_pla",
"tizyx_pla_bois",
"tizyx_pva",
"tizyx_abs",
"verbatim_bvoh_175",
"Vertex_Delta_TPU",
"Vertex_Delta_ABS",
"Vertex_Delta_PET",
"Vertex_Delta_PLA",
"Vertex_Delta_PLA_Glitter",
"Vertex_Delta_PLA_Mat",
"Vertex_Delta_PLA_Satin",
"Vertex_Delta_PLA_Wood",
"volumic_support_ultra",
"volumic_abs_ultra",
"volumic_arma_ultra",
"volumic_asa_ultra",
"volumic_br80_ultra",
"volumic_bumper_ultra",
"volumic_cu80_ultra",
"volumic_flex93_ultra",
"volumic_medical_ultra",
"volumic_nylon_ultra",
"volumic_pekk_carbone",
"volumic_petg_ultra",
"volumic_petgcarbone_ultra",
"volumic_pla_ultra",
"volumic_pp_ultra",
"volumic_strong_ultra",
"zyyx_pro_flex",
"zyyx_pro_pla"
]
},
"overrides": {
"machine_name": { "default_value": "Kingroon Base Printer" },
"machine_start_gcode": { "default_value": "G28 ; home all axes\n M117 Purge extruder\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface\n G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position\n G1 X2 Y175.0 Z0.3 F1500.0 E15 ; draw 1st line\n G1 X2 Y175.0 Z0.4 F5000.0 ; move to side a little\n G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line\n G92 E0 ; reset extruder\n G1 Z1.0 F3000 ; move z up little to prevent scratching of surface"},
"machine_end_gcode": { "default_value": "G91; relative positioning\n G1 Z1.0 F3000 ; move z up little to prevent scratching of print\n G90; absolute positioning\n G1 X0 Y200 F1000 ; prepare for part removal\n M104 S0; turn off extruder\n M140 S0 ; turn off bed\n G1 X0 Y300 F1000 ; prepare for part removal\n M84 ; disable motors\n M106 S0 ; turn off fan" },
"machine_width": { "default_value": 180 },
"machine_depth": { "default_value": 180 },
"machine_height": { "default_value": 180 },
"machine_max_feedrate_x": { "default_value": 100 },
"machine_max_feedrate_y": { "default_value": 100 },
"machine_max_feedrate_z": { "default_value": 10 },
"machine_max_feedrate_e": { "default_value": 100 },
"machine_max_acceleration_x": { "default_value": 500 },
"machine_max_acceleration_y": { "default_value": 500 },
"machine_max_acceleration_z": { "default_value": 50 },
"machine_max_acceleration_e": { "default_value": 500 },
"machine_acceleration": { "default_value": 500 },
"machine_max_jerk_xy": { "default_value": 10 },
"machine_max_jerk_z": { "default_value": 0.3 },
"machine_max_jerk_e": { "default_value": 5 },
"machine_heated_bed": { "default_value": true },
"material_diameter": { "default_value": 1.75 },
"acceleration_print": { "value": 500 },
"acceleration_travel": { "value": 500 },
"acceleration_travel_layer_0": { "value": "acceleration_travel" },
"acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
"jerk_print": { "value": 8 },
"jerk_travel": { "value": "jerk_print" },
"jerk_travel_layer_0": { "value": "jerk_travel" },
"acceleration_enabled": { "value": false },
"jerk_enabled": { "value": false },
"default_material_print_temperature": { "maximum_value_warning": "260", "maximum_value": "275" },
"default_material_bed_temperature": { "maximum_value": "150" },
"speed_print": { "value": 60.0 } ,
"speed_infill": { "value": "speed_print" },
"speed_wall": { "value": "speed_print / 2" },
"speed_wall_0": { "value": "speed_wall" },
"speed_wall_x": { "value": "speed_wall" },
"speed_topbottom": { "value": "speed_print / 2" },
"speed_roofing": { "value": "speed_topbottom" },
"speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
"speed_layer_0": { "value": 20.0 },
"speed_print_layer_0": { "value": "speed_layer_0" },
"speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
"speed_prime_tower": { "value": "speed_topbottom" },
"speed_support": { "value": "speed_wall_0" },
"speed_support_interface": { "value": "speed_topbottom" },
"speed_z_hop": { "value": 5 },
"skirt_brim_speed": { "value": "speed_layer_0" },
"line_width": { "value": "machine_nozzle_size * 1.1" },
"optimize_wall_printing_order": { "value": true },
"material_initial_print_temperature": { "value": "material_print_temperature" },
"material_final_print_temperature": { "value": "material_print_temperature" },
"material_flow": { "value": 100 },
"travel_compensate_overlapping_walls_0_enabled": { "value": false },
"z_seam_type": { "value": "'back'" },
"z_seam_corner": { "value": "'z_seam_corner_none'" },
"infill_sparse_density": { "value": "15" },
"infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'cubic'" },
"infill_before_walls": { "value": false },
"infill_overlap": { "value": 30.0 },
"skin_overlap": { "value": 10.0 },
"infill_wipe_dist": { "value": 0.0 },
"wall_0_wipe_dist": { "value": 0.0 },
"fill_perimeter_gaps": { "value": "'everywhere'" },
"fill_outline_gaps": { "value": false },
"filter_out_tiny_gaps": { "value": false },
"retraction_speed": {
"maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
"maximum_value": 200
},
"retraction_retract_speed": {
"maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
"maximum_value": 200
},
"retraction_prime_speed": {
"maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
"maximum_value": 200
},
"retraction_hop_enabled": { "value": true },
"retraction_hop": { "value": "layer_height*2" },
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'infill'" },
"retraction_combing_max_distance": { "value": 30 },
"travel_avoid_other_parts": { "value": true },
"travel_avoid_supports": { "value": true },
"travel_retract_before_outer_wall": { "value": true },
"retraction_amount": { "value": 2 },
"retraction_enable": { "value": true },
"retraction_count_max": { "value": 100 },
"retraction_extrusion_window": { "value": 2 },
"retraction_min_travel": { "value": 1.5 },
"cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
"cool_fan_enabled": { "value": true },
"cool_min_layer_time": { "value": 10 },
"adhesion_type": { "value": "'none' if support_enable else 'skirt'" },
"brim_replaces_support": { "value": false },
"skirt_gap": { "value": 10.0 },
"skirt_line_count": { "value": 4 },
"adaptive_layer_height_variation": { "value": 0.04 },
"adaptive_layer_height_variation_step": { "value": 0.04 },
"meshfix_maximum_resolution": { "value": "0.05" },
"meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
"support_angle": { "value": "math.floor(math.degrees(math.atan(line_width / 2.0 / layer_height)))" },
"support_pattern": { "value": "'zigzag'" },
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
"support_use_towers": { "value": false },
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height * 2" },
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
"support_wall_count": { "value": 1 },
"support_brim_enable": { "value": true },
"support_brim_width": { "value": 4 },
"support_interface_enable": { "value": true },
"support_interface_height": { "value": "layer_height * 4" },
"support_interface_density": { "value": 33.333 },
"support_interface_pattern": { "value": "'grid'" },
"support_interface_skip_height": { "value": 0.2 },
"minimum_support_area": { "value": 2 },
"minimum_interface_area": { "value": 10 },
"top_bottom_thickness": {"value": "layer_height_0 + layer_height * 3" },
"wall_thickness": {"value": "line_width * 2" }
}
}

22
resources/definitions/kingroon_kp3.def.json Normal file
View file

@ -0,0 +1,22 @@
{
"name": "Kingroon KP3",
"version": 2,
"inherits": "kingroon_base",
"overrides": {
"machine_name": { "default_value": "Kingroon KP3" },
"machine_steps_per_mm_x": { "value": 80 },
"machine_steps_per_mm_y": { "value": 80 },
"machine_steps_per_mm_z": { "value": 400 },
"machine_steps_per_mm_e": { "value": 95 },
"retraction_amount": { "value": 4 },
"retraction_speed": { "value": 40 },
"retraction_extrusion_window": { "value": 4 },
"speed_travel": { "value": 100 }
},
"metadata": {
"quality_definition": "kingroon_base",
"visible": true,
"platform": "kingroon_kp3.stl"
}
}

33
resources/definitions/kingroon_kp3s.def.json Normal file
View file

@ -0,0 +1,33 @@
{
"name": "Kingroon KP3S",
"version": 2,
"inherits": "kingroon_base",
"overrides": {
"machine_name": { "default_value": "Kingroon KP3S" },
"machine_steps_per_mm_x": { "value": 160 },
"machine_steps_per_mm_y": { "value": 160 },
"machine_steps_per_mm_z": { "value": 800 },
"machine_steps_per_mm_e": { "value": 764 },
"machine_max_feedrate_x": { "value": 200 },
"machine_max_feedrate_y": { "value": 200 },
"machine_max_feedrate_z": { "value": 4 },
"machine_max_feedrate_e": { "value": 100 },
"machine_max_acceleration_x": { "value": 1000 },
"machine_max_acceleration_y": { "value": 1000 },
"machine_max_acceleration_z": { "value": 100 },
"machine_max_acceleration_e": { "value": 1000 },
"machine_acceleration": { "value": 1000 },
"machine_max_jerk_xy": { "value": 15 },
"machine_max_jerk_z": { "value": 0.4 },
"retraction_amount": { "value": 1 },
"retraction_speed": { "value": 40 },
"retraction_extrusion_window": { "value": 1 },
"speed_z_hop": { "value": 4 }
},
"metadata": {
"quality_definition": "kingroon_base",
"visible": true,
"platform": "kingroon_kp3s.stl"
}
}

59
resources/definitions/seckit_skgo.def.json Normal file
View file

@ -0,0 +1,59 @@
{
"version": 2,
"name": "SecKit SK-Go",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Ernest Lin",
"manufacturer": "SecKit 3DP Design",
"file_formats": "text/x-gcode",
"has_materials": true,
"has_machine_quality": false,
"preferred_quality_type": "normal",
"machine_extruder_trains":
{
"0": "seckit_skgo_extruder_0"
}
},
"overrides": {
"machine_name": { "default_value": "SecKit SK-Go" },
"machine_width": {
"default_value": 310
},
"machine_depth": {
"default_value": 310
},
"machine_height": {
"default_value": 350
},
"machine_center_is_zero": {
"default_value": false
},
"machine_heated_bed": {
"default_value": true
},
"machine_head_with_fans_polygon":
{
"default_value": [
[ -10, 20 ],
[ -10, -20 ],
[ 10, 20 ],
[ 10, -20 ]
]
},
"gantry_height": {
"value": "50"
},
"machine_gcode_flavor": {
"default_value": "RepRap (Marlin/Sprinter)"
},
"machine_start_gcode": {
"default_value": "M569 S1 X Y ; enable StealthChop for Sensorless Homing\nG28 ; Home\nM569 S0 X Y ; disable StealthChop for normal print\nM900 K0.07 ; K factor of linear advance\nG1 Z15.0 F6000 ;Move the platform down 15mm\n;Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0\nG90 ; abs position"
},
"machine_end_gcode": {
"default value": "M104 S0\nM140 S0\nG91 ; relative position\nG1 Z10 F450\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG90 ; abs position\nG1 X10 Y280 F6000\nM84"
}
}
}

59
resources/definitions/seckit_sktank.def.json Normal file
View file

@ -0,0 +1,59 @@
{
"version": 2,
"name": "SecKit SK-Tank",
"inherits": "fdmprinter",
"metadata": {
"visible": true,
"author": "Ernest Lin",
"manufacturer": "SecKit 3DP Design",
"file_formats": "text/x-gcode",
"has_materials": true,
"has_machine_quality": false,
"preferred_quality_type": "normal",
"machine_extruder_trains":
{
"0": "seckit_sktank_extruder_0"
}
},
"overrides": {
"machine_name": { "default_value": "SecKit SK-Tank" },
"machine_width": {
"default_value": 350
},
"machine_depth": {
"default_value": 350
},
"machine_height": {
"default_value": 400
},
"machine_center_is_zero": {
"default_value": false
},
"machine_heated_bed": {
"default_value": true
},
"machine_head_with_fans_polygon":
{
"default_value": [
[ -10, 20 ],
[ -10, -20 ],
[ 10, 20 ],
[ 10, -20 ]
]
},
"gantry_height": {
"value": "50"
},
"machine_gcode_flavor": {
"default_value": "RepRap (RepRap)"
},
"machine_start_gcode": {
"default_value": "G32 ;auto bed tramming and find a correct Z datum\nG29 S1 ;load default mesh\nM572 D0 S0.08 ; Pressure advance\nG1 Z15.0 F6000 ;Move the platform down 15mm\n;Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0"
},
"machine_end_gcode": {
"default value": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG90\nG1 X2 Y300 F6000\n; move bed to the bottom to prevent bed falls\n;G91\n;G1 Z300\nM106 P0 S0\nM18"
}
}
}

3
resources/definitions/ultimaker2_plus_connect.def.json
View file

@ -22,8 +22,7 @@
"0": "ultimaker2_plus_connect_extruder_0"
},
"supports_usb_connection": false,
"supports_network_connection": true,
"supports_material_export": true
"supports_network_connection": true
},
"overrides": {