Merge remote-tracking branch 'origin/main' into PP-371-Prevent-wrong-temperature-with-support-materials

2025-08-09 23:05:01 -06:00 · 2024-07-02 08:41:29 +02:00 · 2024-07-02 08:41:29 +02:00 · 2e0bc8c377
commit 2e0bc8c377
parent 03c5eccc73 f7a3b48bcd
119 changed files with 1003 additions and 12902 deletions
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_um-pla_0.1mm.inst.cfg
@ -41,7 +41,6 @@ machine_nozzle_cool_down_speed = 1.3
 machine_nozzle_heat_up_speed = 1.9
 material_extrusion_cool_down_speed = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.06mm.inst.cfg
@ -15,7 +15,6 @@ weight = 1
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature - 5
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.15mm.inst.cfg
@ -14,7 +14,6 @@ weight = -1
 [values]
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 70
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.1mm.inst.cfg
@ -14,7 +14,6 @@ weight = 0
 [values]
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 support_bottom_distance = =support_z_distance
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_topbottom = =math.ceil(speed_print * 40 / 70)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_pla_0.3mm.inst.cfg
@ -22,7 +22,6 @@ infill_sparse_density = 15
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_prime_speed = =retraction_speed
 speed_print = 50
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.06mm.inst.cfg
@ -42,7 +42,6 @@ machine_nozzle_heat_up_speed = 1.9
 material_extrusion_cool_down_speed = 0.7
 material_max_flowrate = 12
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.15mm.inst.cfg
@ -43,7 +43,6 @@ material_extrusion_cool_down_speed = 0.7
 material_max_flowrate = 12
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.1mm.inst.cfg
@ -42,7 +42,6 @@ machine_nozzle_heat_up_speed = 1.9
 material_extrusion_cool_down_speed = 0.7
 material_max_flowrate = 12
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.2mm.inst.cfg
@ -45,7 +45,6 @@ material_max_flowrate = 12
 material_print_temperature = =default_material_print_temperature + 5
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_um-pla_0.3mm.inst.cfg
@ -44,7 +44,6 @@ material_max_flowrate = 12
 material_print_temperature = =default_material_print_temperature + 10
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = False
 raft_airgap = 0.25
 retraction_amount = 6.5
 retraction_prime_speed = =retraction_speed
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.2mm.inst.cfg
@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.3mm.inst.cfg
@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_pla_0.4mm.inst.cfg
@ -16,7 +16,6 @@ gradual_infill_step_height = =3 * layer_height
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 15
-prime_tower_enable = True
 speed_infill = =math.ceil(speed_print * 35 / 45)
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.2mm.inst.cfg
@ -47,7 +47,6 @@ material_max_flowrate = 15
 material_print_temperature = =default_material_print_temperature + 10
 meshfix_maximum_resolution = 0.7
 optimize_wall_printing_order = False
-prime_tower_enable = True
 raft_airgap = 0.25
 retraction_amount = 4
 retraction_prime_speed = 22
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.3mm.inst.cfg
@ -44,7 +44,6 @@ material_flow = 93
 material_max_flowrate = 15
 material_print_temperature = =default_material_print_temperature + 10
 optimize_wall_printing_order = False
-prime_tower_enable = True
 raft_airgap = 0.25
 retraction_amount = 4
 retraction_prime_speed = 22
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_um-pla_0.4mm.inst.cfg
@ -44,7 +44,6 @@ material_flow = 93
 material_max_flowrate = 15
 material_print_temperature = =default_material_print_temperature + 15
 optimize_wall_printing_order = False
-prime_tower_enable = True
 raft_airgap = 0.25
 retraction_amount = 4
 retraction_prime_speed = 22
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.06mm.inst.cfg
@ -12,14 +12,18 @@ variant = BB 0.4
 weight = 1

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
-prime_tower_enable = False
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = =3 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.15mm.inst.cfg
@ -12,13 +12,17 @@ variant = BB 0.4
 weight = -1

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
-prime_tower_enable = False
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.1mm.inst.cfg
@ -12,14 +12,18 @@ variant = BB 0.4
 weight = 0

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
-prime_tower_enable = False
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = =2 * layer_height
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.2mm.inst.cfg
@ -12,13 +12,17 @@ variant = BB 0.4
 weight = -2

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
-prime_tower_enable = False
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_pva_0.3mm.inst.cfg
@ -13,13 +13,18 @@ variant = BB 0.4
 weight = -3

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature - 5
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.2mm.inst.cfg
@ -12,11 +12,16 @@ variant = BB 0.8
 weight = -2

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.3mm.inst.cfg
@ -12,13 +12,18 @@ variant = BB 0.8
 weight = -3

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_infill_sparse_thickness = 0.3
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_pva_0.4mm.inst.cfg
@ -12,12 +12,17 @@ variant = BB 0.8
 weight = -4

 [values]
+acceleration_prime_tower = 1500
 brim_replaces_support = False
 build_volume_temperature = =70 if extruders_enabled_count > 1 else 35
 cool_fan_enabled = =not (support_enable and (extruder_nr == support_infill_extruder_nr))
 default_material_bed_temperature = =0 if extruders_enabled_count > 1 else 60
+initial_layer_line_width_factor = 150
 material_print_temperature = =default_material_print_temperature + 5
+minimum_support_area = 4
 retraction_count_max = 5
 skirt_brim_minimal_length = =min(2000, 175 / (layer_height * line_width))
+speed_prime_tower = 25
+speed_support = 50
 support_interface_enable = True

--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.4_um-pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.15mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
--- a/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_um-pla_0.2mm.inst.cfg
@ -18,7 +18,6 @@ infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
 machine_nozzle_cool_down_speed = 0.75
 machine_nozzle_heat_up_speed = 1.6
 material_print_temperature = =default_material_print_temperature + 10
-prime_tower_enable = True
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 35 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)