Added the eryone_er20 3d printer

resources/quality/eryone_er20/eryone_er20_draft.inst.cfg

@@ -0,0 +1,66 @@
+[general]
+version = 4
+name = Draft
+definition = eryone_er20
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = draft
+weight = -2
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1500
+acceleration_travel = 3000
+adhesion_type = brim
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 105
+jerk_enabled = True
+jerk_print = 10
+jerk_travel = 12
+layer_height = 0.3
+layer_height_0 = 0.3
+material_bed_temperature = 60
+material_diameter = 1.75
+default_material_print_temperature = 205
+material_print_temperature = 205
+material_print_temperature_layer_0 = 205
+material_initial_print_temperature = 205
+material_final_print_temperature = 205
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 55
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 80
+speed_support = 60
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_travel = 150
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 50
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_z_distance = 0.3
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.2
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/eryone_er20/eryone_er20_high.inst.cfg

@@ -0,0 +1,79 @@
+[general]
+version = 4
+name = High
+definition = eryone_er20
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = high
+weight = 1
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 500
+acceleration_travel = 3000
+adhesion_type = brim
+brim_width = 6.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 25
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 105
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.15
+layer_height_0 = 0.2
+line_width = 0.42
+material_bed_temperature = 60
+material_diameter = 1.75
+default_material_print_temperature = 205
+material_print_temperature = 205
+material_print_temperature_layer_0 = 205
+material_initial_print_temperature = 205
+material_final_print_temperature = 205
+optimize_wall_printing_order = True
+outer_inset_first = True
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 55
+retraction_combing = noskin
+skin_overlap = 10
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 150
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 50
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_z_distance = 0.3
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.2
+smooth_spiralized_contours = False
+top_bottom_thickness = 1.2
+travel_retract_before_outer_wall = True
+wall_thickness = 1.2
+z_seam_corner = z_seam_corner_weighted
+
+
+
+
+

resources/quality/eryone_er20/eryone_er20_normal.inst.cfg

@@ -0,0 +1,66 @@
+[general]
+version = 4
+name = Normal
+definition = eryone_er20
+
+[metadata]
+setting_version = 15
+type = quality
+quality_type = normal
+weight = 0
+global_quality = True
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1000
+acceleration_travel = 3000
+adhesion_type = brim
+brim_width = 5
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 105
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
+material_bed_temperature = 60
+material_diameter = 1.75
+default_material_print_temperature = 205
+material_print_temperature = 205
+material_print_temperature_layer_0 = 205
+material_initial_print_temperature = 205
+material_final_print_temperature = 205
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 55
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 150
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 50
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_z_distance = 0.3
+support_xy_distance = 0.7
+support_xy_distance_overhang = 0.2
+top_bottom_thickness = 1.2
+wall_thickness = 1.2