diff --git a/LICENSE b/LICENSE index 58777e31af..07b1d92c0e 100644 --- a/LICENSE +++ b/LICENSE @@ -1,661 +1,165 @@ -GNU AFFERO GENERAL PUBLIC LICENSE - Version 3, 19 November 2007 + GNU LESSER GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 Copyright (C) 2007 Free Software Foundation, Inc. Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. - Preamble - - The GNU Affero General Public License is a free, copyleft license for -software and other kinds of works, specifically designed to ensure -cooperation with the community in the case of network server software. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -our General Public Licenses are intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - Developers that use our General Public Licenses protect your rights -with two steps: (1) assert copyright on the software, and (2) offer -you this License which gives you legal permission to copy, distribute -and/or modify the software. - - A secondary benefit of defending all users' freedom is that -improvements made in alternate versions of the program, if they -receive widespread use, become available for other developers to -incorporate. Many developers of free software are heartened and -encouraged by the resulting cooperation. However, in the case of -software used on network servers, this result may fail to come about. -The GNU General Public License permits making a modified version and -letting the public access it on a server without ever releasing its -source code to the public. - - The GNU Affero General Public License is designed specifically to -ensure that, in such cases, the modified source code becomes available -to the community. It requires the operator of a network server to -provide the source code of the modified version running there to the -users of that server. Therefore, public use of a modified version, on -a publicly accessible server, gives the public access to the source -code of the modified version. - - An older license, called the Affero General Public License and -published by Affero, was designed to accomplish similar goals. This is -a different license, not a version of the Affero GPL, but Affero has -released a new version of the Affero GPL which permits relicensing under -this license. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU Affero General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Remote Network Interaction; Use with the GNU General Public License. - - Notwithstanding any other provision of this License, if you modify the -Program, your modified version must prominently offer all users -interacting with it remotely through a computer network (if your version -supports such interaction) an opportunity to receive the Corresponding -Source of your version by providing access to the Corresponding Source -from a network server at no charge, through some standard or customary -means of facilitating copying of software. This Corresponding Source -shall include the Corresponding Source for any work covered by version 3 -of the GNU General Public License that is incorporated pursuant to the -following paragraph. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the work with which it is combined will remain governed by version -3 of the GNU General Public License. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU Affero General Public License from time to time. Such new versions -will be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU Affero General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU Affero General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU Affero General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - - Copyright (C) - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU Affero General Public License as published - by the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU Affero General Public License for more details. - - You should have received a copy of the GNU Affero General Public License - along with this program. If not, see . - -Also add information on how to contact you by electronic and paper mail. - - If your software can interact with users remotely through a computer -network, you should also make sure that it provides a way for users to -get its source. For example, if your program is a web application, its -interface could display a "Source" link that leads users to an archive -of the code. There are many ways you could offer source, and different -solutions will be better for different programs; see section 13 for the -specific requirements. - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU AGPL, see -. + + This version of the GNU Lesser General Public License incorporates +the terms and conditions of version 3 of the GNU General Public +License, supplemented by the additional permissions listed below. + + 0. Additional Definitions. + + As used herein, "this License" refers to version 3 of the GNU Lesser +General Public License, and the "GNU GPL" refers to version 3 of the GNU +General Public License. + + "The Library" refers to a covered work governed by this License, +other than an Application or a Combined Work as defined below. + + An "Application" is any work that makes use of an interface provided +by the Library, but which is not otherwise based on the Library. +Defining a subclass of a class defined by the Library is deemed a mode +of using an interface provided by the Library. + + A "Combined Work" is a work produced by combining or linking an +Application with the Library. The particular version of the Library +with which the Combined Work was made is also called the "Linked +Version". + + The "Minimal Corresponding Source" for a Combined Work means the +Corresponding Source for the Combined Work, excluding any source code +for portions of the Combined Work that, considered in isolation, are +based on the Application, and not on the Linked Version. + + The "Corresponding Application Code" for a Combined Work means the +object code and/or source code for the Application, including any data +and utility programs needed for reproducing the Combined Work from the +Application, but excluding the System Libraries of the Combined Work. + + 1. Exception to Section 3 of the GNU GPL. + + You may convey a covered work under sections 3 and 4 of this License +without being bound by section 3 of the GNU GPL. + + 2. Conveying Modified Versions. + + If you modify a copy of the Library, and, in your modifications, a +facility refers to a function or data to be supplied by an Application +that uses the facility (other than as an argument passed when the +facility is invoked), then you may convey a copy of the modified +version: + + a) under this License, provided that you make a good faith effort to + ensure that, in the event an Application does not supply the + function or data, the facility still operates, and performs + whatever part of its purpose remains meaningful, or + + b) under the GNU GPL, with none of the additional permissions of + this License applicable to that copy. + + 3. Object Code Incorporating Material from Library Header Files. + + The object code form of an Application may incorporate material from +a header file that is part of the Library. You may convey such object +code under terms of your choice, provided that, if the incorporated +material is not limited to numerical parameters, data structure +layouts and accessors, or small macros, inline functions and templates +(ten or fewer lines in length), you do both of the following: + + a) Give prominent notice with each copy of the object code that the + Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the object code with a copy of the GNU GPL and this license + document. + + 4. Combined Works. + + You may convey a Combined Work under terms of your choice that, +taken together, effectively do not restrict modification of the +portions of the Library contained in the Combined Work and reverse +engineering for debugging such modifications, if you also do each of +the following: + + a) Give prominent notice with each copy of the Combined Work that + the Library is used in it and that the Library and its use are + covered by this License. + + b) Accompany the Combined Work with a copy of the GNU GPL and this license + document. + + c) For a Combined Work that displays copyright notices during + execution, include the copyright notice for the Library among + these notices, as well as a reference directing the user to the + copies of the GNU GPL and this license document. + + d) Do one of the following: + + 0) Convey the Minimal Corresponding Source under the terms of this + License, and the Corresponding Application Code in a form + suitable for, and under terms that permit, the user to + recombine or relink the Application with a modified version of + the Linked Version to produce a modified Combined Work, in the + manner specified by section 6 of the GNU GPL for conveying + Corresponding Source. + + 1) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (a) uses at run time + a copy of the Library already present on the user's computer + system, and (b) will operate properly with a modified version + of the Library that is interface-compatible with the Linked + Version. + + e) Provide Installation Information, but only if you would otherwise + be required to provide such information under section 6 of the + GNU GPL, and only to the extent that such information is + necessary to install and execute a modified version of the + Combined Work produced by recombining or relinking the + Application with a modified version of the Linked Version. (If + you use option 4d0, the Installation Information must accompany + the Minimal Corresponding Source and Corresponding Application + Code. If you use option 4d1, you must provide the Installation + Information in the manner specified by section 6 of the GNU GPL + for conveying Corresponding Source.) + + 5. Combined Libraries. + + You may place library facilities that are a work based on the +Library side by side in a single library together with other library +facilities that are not Applications and are not covered by this +License, and convey such a combined library under terms of your +choice, if you do both of the following: + + a) Accompany the combined library with a copy of the same work based + on the Library, uncombined with any other library facilities, + conveyed under the terms of this License. + + b) Give prominent notice with the combined library that part of it + is a work based on the Library, and explaining where to find the + accompanying uncombined form of the same work. + + 6. Revised Versions of the GNU Lesser General Public License. + + The Free Software Foundation may publish revised and/or new versions +of the GNU Lesser General Public License from time to time. Such new +versions will be similar in spirit to the present version, but may +differ in detail to address new problems or concerns. + + Each version is given a distinguishing version number. If the +Library as you received it specifies that a certain numbered version +of the GNU Lesser General Public License "or any later version" +applies to it, you have the option of following the terms and +conditions either of that published version or of any later version +published by the Free Software Foundation. If the Library as you +received it does not specify a version number of the GNU Lesser +General Public License, you may choose any version of the GNU Lesser +General Public License ever published by the Free Software Foundation. + + If the Library as you received it specifies that a proxy can decide +whether future versions of the GNU Lesser General Public License shall +apply, that proxy's public statement of acceptance of any version is +permanent authorization for you to choose that version for the +Library. \ No newline at end of file diff --git a/cmake/CuraTests.cmake b/cmake/CuraTests.cmake index eca96257cc..a8af16c28c 100644 --- a/cmake/CuraTests.cmake +++ b/cmake/CuraTests.cmake @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. enable_testing() include(CMakeParseArguments) diff --git a/cura/ArrangeObjectsJob.py b/cura/ArrangeObjectsJob.py index 8a3bb2daa8..d650fd7f57 100755 --- a/cura/ArrangeObjectsJob.py +++ b/cura/ArrangeObjectsJob.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Job import Job from UM.Scene.SceneNode import SceneNode diff --git a/cura/BuildVolume.py b/cura/BuildVolume.py index 4e55528f5d..e87bfebd94 100755 --- a/cura/BuildVolume.py +++ b/cura/BuildVolume.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from cura.Settings.ExtruderManager import ExtruderManager from UM.Settings.ContainerRegistry import ContainerRegistry diff --git a/cura/CameraAnimation.py b/cura/CameraAnimation.py index c6051c58d1..1d91613edf 100644 --- a/cura/CameraAnimation.py +++ b/cura/CameraAnimation.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import QVariantAnimation, QEasingCurve diff --git a/cura/ConvexHullDecorator.py b/cura/ConvexHullDecorator.py index 70f77d9712..8726ecb6e6 100644 --- a/cura/ConvexHullDecorator.py +++ b/cura/ConvexHullDecorator.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Application import Application from UM.Math.Polygon import Polygon diff --git a/cura/ConvexHullNode.py b/cura/ConvexHullNode.py index 84becd0da3..cc4720c197 100644 --- a/cura/ConvexHullNode.py +++ b/cura/ConvexHullNode.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Application import Application from UM.Scene.SceneNode import SceneNode diff --git a/cura/CuraActions.py b/cura/CuraActions.py index d46448dcec..b51728f028 100644 --- a/cura/CuraActions.py +++ b/cura/CuraActions.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import QObject, QUrl from PyQt5.QtGui import QDesktopServices diff --git a/cura/CuraApplication.py b/cura/CuraApplication.py index c4f3217a1a..9e016561d5 100755 --- a/cura/CuraApplication.py +++ b/cura/CuraApplication.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtNetwork import QLocalServer from PyQt5.QtNetwork import QLocalSocket @@ -211,7 +211,7 @@ class CuraApplication(QtApplication): self.setRequiredPlugins([ "CuraEngineBackend", - "MeshView", + "SolidView", "LayerView", "STLReader", "SelectionTool", diff --git a/cura/CuraSplashScreen.py b/cura/CuraSplashScreen.py index f340c01623..2b79646408 100644 --- a/cura/CuraSplashScreen.py +++ b/cura/CuraSplashScreen.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from threading import Thread, Event diff --git a/cura/CuraVersion.py.in b/cura/CuraVersion.py.in index fb66275395..c489485c2c 100644 --- a/cura/CuraVersion.py.in +++ b/cura/CuraVersion.py.in @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. CuraVersion = "@CURA_VERSION@" CuraBuildType = "@CURA_BUILDTYPE@" diff --git a/cura/LayerData.py b/cura/LayerData.py index 03dc6da45f..796e71cbdc 100644 --- a/cura/LayerData.py +++ b/cura/LayerData.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Mesh.MeshData import MeshData diff --git a/cura/LayerDataBuilder.py b/cura/LayerDataBuilder.py index a5da57d42b..6e50611e64 100755 --- a/cura/LayerDataBuilder.py +++ b/cura/LayerDataBuilder.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from .Layer import Layer from .LayerPolygon import LayerPolygon diff --git a/cura/LayerPolygon.py b/cura/LayerPolygon.py index d6ab854169..7f41351b7f 100644 --- a/cura/LayerPolygon.py +++ b/cura/LayerPolygon.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Application import Application from typing import Any diff --git a/cura/MachineAction.py b/cura/MachineAction.py index c4553bc1e4..bc7b17af85 100644 --- a/cura/MachineAction.py +++ b/cura/MachineAction.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import QObject, pyqtSlot, pyqtProperty, pyqtSignal, QUrl from PyQt5.QtQml import QQmlComponent, QQmlContext diff --git a/cura/MachineActionManager.py b/cura/MachineActionManager.py index ad9c91ec46..27b08ba8a1 100644 --- a/cura/MachineActionManager.py +++ b/cura/MachineActionManager.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Logger import Logger from UM.PluginRegistry import PluginRegistry # So MachineAction can be added as plugin type diff --git a/cura/MultiplyObjectsJob.py b/cura/MultiplyObjectsJob.py index c986439a5b..721c0e4c07 100644 --- a/cura/MultiplyObjectsJob.py +++ b/cura/MultiplyObjectsJob.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Job import Job from UM.Scene.SceneNode import SceneNode diff --git a/cura/OneAtATimeIterator.py b/cura/OneAtATimeIterator.py index b700fe83b3..44f8d2766a 100644 --- a/cura/OneAtATimeIterator.py +++ b/cura/OneAtATimeIterator.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Scene.Iterator import Iterator from UM.Scene.SceneNode import SceneNode diff --git a/cura/PlatformPhysics.py b/cura/PlatformPhysics.py index 5eee8d8a55..23197dac24 100755 --- a/cura/PlatformPhysics.py +++ b/cura/PlatformPhysics.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import QTimer diff --git a/cura/PlatformPhysicsOperation.py b/cura/PlatformPhysicsOperation.py index 57206226e2..75c5b437bc 100644 --- a/cura/PlatformPhysicsOperation.py +++ b/cura/PlatformPhysicsOperation.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Operations.Operation import Operation from UM.Operations.GroupedOperation import GroupedOperation diff --git a/cura/PrintInformation.py b/cura/PrintInformation.py index 155d0a6d02..80abd0c356 100644 --- a/cura/PrintInformation.py +++ b/cura/PrintInformation.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import QObject, pyqtSignal, pyqtProperty from UM.FlameProfiler import pyqtSlot diff --git a/cura/PrinterOutputDevice.py b/cura/PrinterOutputDevice.py index ea00122105..c6e98257ba 100644 --- a/cura/PrinterOutputDevice.py +++ b/cura/PrinterOutputDevice.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.i18n import i18nCatalog from UM.OutputDevice.OutputDevice import OutputDevice diff --git a/cura/ProfileReader.py b/cura/ProfileReader.py index 266abd50a4..d4600ed99f 100644 --- a/cura/ProfileReader.py +++ b/cura/ProfileReader.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.PluginObject import PluginObject diff --git a/cura/ProfileWriter.py b/cura/ProfileWriter.py index 276e2b80a3..5f81dc28c3 100644 --- a/cura/ProfileWriter.py +++ b/cura/ProfileWriter.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from UM.PluginObject import PluginObject diff --git a/cura/QualityManager.py b/cura/QualityManager.py index c0b5afb71e..b6d47d919b 100644 --- a/cura/QualityManager.py +++ b/cura/QualityManager.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. # This collects a lot of quality and quality changes related code which was split between ContainerManager # and the MachineManager and really needs to usable from both. diff --git a/cura/SetParentOperation.py b/cura/SetParentOperation.py index e2fb18feff..612c02f18d 100644 --- a/cura/SetParentOperation.py +++ b/cura/SetParentOperation.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from UM.Scene.SceneNode import SceneNode from UM.Operations import Operation diff --git a/cura/Settings/ContainerManager.py b/cura/Settings/ContainerManager.py index 59b73eec4c..85aed93cf6 100644 --- a/cura/Settings/ContainerManager.py +++ b/cura/Settings/ContainerManager.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import os.path import urllib diff --git a/cura/Settings/ContainerSettingsModel.py b/cura/Settings/ContainerSettingsModel.py index 5d7a252a4f..2c4bef6464 100644 --- a/cura/Settings/ContainerSettingsModel.py +++ b/cura/Settings/ContainerSettingsModel.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Application import Application from UM.Qt.ListModel import ListModel diff --git a/cura/Settings/CuraContainerRegistry.py b/cura/Settings/CuraContainerRegistry.py index 1c2d76c3b2..12f27e8156 100644 --- a/cura/Settings/CuraContainerRegistry.py +++ b/cura/Settings/CuraContainerRegistry.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import os import os.path diff --git a/cura/Settings/CuraContainerStack.py b/cura/Settings/CuraContainerStack.py index eeb170c489..2d3bf683f6 100755 --- a/cura/Settings/CuraContainerStack.py +++ b/cura/Settings/CuraContainerStack.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import os.path diff --git a/cura/Settings/CuraStackBuilder.py b/cura/Settings/CuraStackBuilder.py index 6ff4051db7..32d6cd3cd7 100644 --- a/cura/Settings/CuraStackBuilder.py +++ b/cura/Settings/CuraStackBuilder.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Logger import Logger diff --git a/cura/Settings/Exceptions.py b/cura/Settings/Exceptions.py index a30059b2e7..0a869cf922 100644 --- a/cura/Settings/Exceptions.py +++ b/cura/Settings/Exceptions.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. ## Raised when trying to perform an operation like add on a stack that does not allow that. diff --git a/cura/Settings/ExtruderManager.py b/cura/Settings/ExtruderManager.py index b16a88f1a9..93e781cd5e 100755 --- a/cura/Settings/ExtruderManager.py +++ b/cura/Settings/ExtruderManager.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import pyqtSignal, pyqtProperty, QObject, QVariant #For communicating data and events to Qt. from UM.FlameProfiler import pyqtSlot diff --git a/cura/Settings/ExtruderStack.py b/cura/Settings/ExtruderStack.py index 0319b2a9ba..d8ff6645a8 100644 --- a/cura/Settings/ExtruderStack.py +++ b/cura/Settings/ExtruderStack.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from typing import Any, TYPE_CHECKING, Optional diff --git a/cura/Settings/ExtrudersModel.py b/cura/Settings/ExtrudersModel.py index 26943e61ca..1d3d23ea56 100644 --- a/cura/Settings/ExtrudersModel.py +++ b/cura/Settings/ExtrudersModel.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import Qt, pyqtSignal, pyqtProperty, QTimer from typing import Iterable diff --git a/cura/Settings/GlobalStack.py b/cura/Settings/GlobalStack.py index bee82e2272..2eb951f721 100755 --- a/cura/Settings/GlobalStack.py +++ b/cura/Settings/GlobalStack.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from typing import Any, Dict, Optional diff --git a/cura/Settings/MachineManager.py b/cura/Settings/MachineManager.py index e323b3ff98..ce9cdc7de7 100755 --- a/cura/Settings/MachineManager.py +++ b/cura/Settings/MachineManager.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. #Type hinting. from typing import Union, List, Dict diff --git a/cura/Settings/MachineNameValidator.py b/cura/Settings/MachineNameValidator.py index dcb83b7a4c..19b29feac4 100644 --- a/cura/Settings/MachineNameValidator.py +++ b/cura/Settings/MachineNameValidator.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import pyqtSlot, pyqtProperty, QObject, pyqtSignal, QRegExp from PyQt5.QtGui import QValidator diff --git a/cura/Settings/MaterialManager.py b/cura/Settings/MaterialManager.py index e2f91622c8..80d2723438 100644 --- a/cura/Settings/MaterialManager.py +++ b/cura/Settings/MaterialManager.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import QObject, pyqtSlot #To expose data to QML. diff --git a/cura/Settings/MaterialSettingsVisibilityHandler.py b/cura/Settings/MaterialSettingsVisibilityHandler.py index b97987a18e..44569ea0c3 100644 --- a/cura/Settings/MaterialSettingsVisibilityHandler.py +++ b/cura/Settings/MaterialSettingsVisibilityHandler.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. import UM.Settings.Models.SettingVisibilityHandler diff --git a/cura/Settings/MaterialsModel.py b/cura/Settings/MaterialsModel.py index 75eeb6c281..bee9307b53 100644 --- a/cura/Settings/MaterialsModel.py +++ b/cura/Settings/MaterialsModel.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Settings.ContainerRegistry import ContainerRegistry #To listen for changes to the materials. from UM.Settings.Models.InstanceContainersModel import InstanceContainersModel #We're extending this class. diff --git a/cura/Settings/ProfilesModel.py b/cura/Settings/ProfilesModel.py index 71426d40f4..2600645b91 100644 --- a/cura/Settings/ProfilesModel.py +++ b/cura/Settings/ProfilesModel.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from collections import OrderedDict diff --git a/cura/Settings/QualityAndUserProfilesModel.py b/cura/Settings/QualityAndUserProfilesModel.py index d0d0f2cae2..6b898b4934 100644 --- a/cura/Settings/QualityAndUserProfilesModel.py +++ b/cura/Settings/QualityAndUserProfilesModel.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Application import Application from cura.QualityManager import QualityManager diff --git a/cura/Settings/QualitySettingsModel.py b/cura/Settings/QualitySettingsModel.py index a3dd6925e5..7c7550ed50 100644 --- a/cura/Settings/QualitySettingsModel.py +++ b/cura/Settings/QualitySettingsModel.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import collections diff --git a/cura/Settings/SetObjectExtruderOperation.py b/cura/Settings/SetObjectExtruderOperation.py index 31c996529a..25c1c6b759 100644 --- a/cura/Settings/SetObjectExtruderOperation.py +++ b/cura/Settings/SetObjectExtruderOperation.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Scene.SceneNode import SceneNode from UM.Operations.Operation import Operation diff --git a/cura/Settings/SettingInheritanceManager.py b/cura/Settings/SettingInheritanceManager.py index d3a1655889..8c9f5b20d6 100644 --- a/cura/Settings/SettingInheritanceManager.py +++ b/cura/Settings/SettingInheritanceManager.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import QObject, pyqtProperty, pyqtSignal from UM.FlameProfiler import pyqtSlot diff --git a/cura/Settings/SettingOverrideDecorator.py b/cura/Settings/SettingOverrideDecorator.py index 2a69353885..4e0893a35f 100644 --- a/cura/Settings/SettingOverrideDecorator.py +++ b/cura/Settings/SettingOverrideDecorator.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import copy diff --git a/cura/Settings/UserProfilesModel.py b/cura/Settings/UserProfilesModel.py index b9c9bef89f..1979a59e27 100644 --- a/cura/Settings/UserProfilesModel.py +++ b/cura/Settings/UserProfilesModel.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Application import Application from cura.QualityManager import QualityManager diff --git a/cura/Settings/__init__.py b/cura/Settings/__init__.py index c00ee15ebf..4713b1c1d0 100644 --- a/cura/Settings/__init__.py +++ b/cura/Settings/__init__.py @@ -1,2 +1,2 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. diff --git a/cura_app.py b/cura_app.py index ef9190a1fe..6869fd2111 100755 --- a/cura_app.py +++ b/cura_app.py @@ -1,7 +1,7 @@ #!/usr/bin/env python3 # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import os import sys import platform diff --git a/plugins/3MFReader/ThreeMFReader.py b/plugins/3MFReader/ThreeMFReader.py index 57b3b9e0fd..a34bf771d7 100755 --- a/plugins/3MFReader/ThreeMFReader.py +++ b/plugins/3MFReader/ThreeMFReader.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import os.path import zipfile diff --git a/plugins/3MFReader/ThreeMFWorkspaceReader.py b/plugins/3MFReader/ThreeMFWorkspaceReader.py index 647d731d46..f37fd54680 100755 --- a/plugins/3MFReader/ThreeMFWorkspaceReader.py +++ b/plugins/3MFReader/ThreeMFWorkspaceReader.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Workspace.WorkspaceReader import WorkspaceReader from UM.Application import Application diff --git a/plugins/3MFReader/WorkspaceDialog.py b/plugins/3MFReader/WorkspaceDialog.py index b77e687885..d80fc8b8b5 100644 --- a/plugins/3MFReader/WorkspaceDialog.py +++ b/plugins/3MFReader/WorkspaceDialog.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import QUrl, pyqtSignal, QObject, pyqtProperty, QCoreApplication from UM.FlameProfiler import pyqtSlot diff --git a/plugins/3MFReader/WorkspaceDialog.qml b/plugins/3MFReader/WorkspaceDialog.qml index 2363f16b9d..dc3b5f7823 100644 --- a/plugins/3MFReader/WorkspaceDialog.qml +++ b/plugins/3MFReader/WorkspaceDialog.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/plugins/3MFReader/__init__.py b/plugins/3MFReader/__init__.py index 9ed15cf43f..9da54586a3 100644 --- a/plugins/3MFReader/__init__.py +++ b/plugins/3MFReader/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from typing import Dict import sys diff --git a/plugins/3MFWriter/ThreeMFWorkspaceWriter.py b/plugins/3MFWriter/ThreeMFWorkspaceWriter.py index aaa590cbaf..9c143f0057 100644 --- a/plugins/3MFWriter/ThreeMFWorkspaceWriter.py +++ b/plugins/3MFWriter/ThreeMFWorkspaceWriter.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Workspace.WorkspaceWriter import WorkspaceWriter from UM.Application import Application diff --git a/plugins/3MFWriter/ThreeMFWriter.py b/plugins/3MFWriter/ThreeMFWriter.py index 34d47f527b..a764d30fac 100644 --- a/plugins/3MFWriter/ThreeMFWriter.py +++ b/plugins/3MFWriter/ThreeMFWriter.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from UM.Mesh.MeshWriter import MeshWriter from UM.Math.Vector import Vector diff --git a/plugins/3MFWriter/__init__.py b/plugins/3MFWriter/__init__.py index 7395e54502..e779628f7e 100644 --- a/plugins/3MFWriter/__init__.py +++ b/plugins/3MFWriter/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. import sys from UM.Logger import Logger diff --git a/plugins/AutoSave/AutoSave.py b/plugins/AutoSave/AutoSave.py index 2aa49e3da1..331f328f2d 100644 --- a/plugins/AutoSave/AutoSave.py +++ b/plugins/AutoSave/AutoSave.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import QTimer diff --git a/plugins/AutoSave/__init__.py b/plugins/AutoSave/__init__.py index dbf39e08cf..d7ee0736a2 100644 --- a/plugins/AutoSave/__init__.py +++ b/plugins/AutoSave/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import AutoSave diff --git a/plugins/ChangeLogPlugin/ChangeLog.py b/plugins/ChangeLogPlugin/ChangeLog.py index 6fc3fd148c..8d1e54f40c 100644 --- a/plugins/ChangeLogPlugin/ChangeLog.py +++ b/plugins/ChangeLogPlugin/ChangeLog.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.i18n import i18nCatalog from UM.Extension import Extension diff --git a/plugins/ChangeLogPlugin/ChangeLog.qml b/plugins/ChangeLogPlugin/ChangeLog.qml index c9d3eb32ba..512687f15a 100644 --- a/plugins/ChangeLogPlugin/ChangeLog.qml +++ b/plugins/ChangeLogPlugin/ChangeLog.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.3 diff --git a/plugins/ChangeLogPlugin/__init__.py b/plugins/ChangeLogPlugin/__init__.py index dbeac8cb2d..97d9e411e5 100644 --- a/plugins/ChangeLogPlugin/__init__.py +++ b/plugins/ChangeLogPlugin/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import ChangeLog diff --git a/plugins/CuraEngineBackend/CuraEngineBackend.py b/plugins/CuraEngineBackend/CuraEngineBackend.py index cb7d333cde..c89f476fa9 100755 --- a/plugins/CuraEngineBackend/CuraEngineBackend.py +++ b/plugins/CuraEngineBackend/CuraEngineBackend.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Backend.Backend import Backend, BackendState from UM.Application import Application diff --git a/plugins/CuraEngineBackend/ProcessGCodeJob.py b/plugins/CuraEngineBackend/ProcessGCodeJob.py index 697d20b053..4974907c30 100644 --- a/plugins/CuraEngineBackend/ProcessGCodeJob.py +++ b/plugins/CuraEngineBackend/ProcessGCodeJob.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Job import Job from UM.Application import Application diff --git a/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py b/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py index 302abc330a..c9fac23d91 100644 --- a/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py +++ b/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py @@ -1,5 +1,5 @@ #Copyright (c) 2017 Ultimaker B.V. -#Cura is released under the terms of the AGPLv3 or higher. +#Cura is released under the terms of the LGPLv3 or higher. import gc diff --git a/plugins/CuraEngineBackend/StartSliceJob.py b/plugins/CuraEngineBackend/StartSliceJob.py index 7f5311dd44..a53daa4e63 100644 --- a/plugins/CuraEngineBackend/StartSliceJob.py +++ b/plugins/CuraEngineBackend/StartSliceJob.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import numpy from string import Formatter diff --git a/plugins/CuraEngineBackend/__init__.py b/plugins/CuraEngineBackend/__init__.py index a5269d03cd..046c8f76a9 100644 --- a/plugins/CuraEngineBackend/__init__.py +++ b/plugins/CuraEngineBackend/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. #Shoopdawoop from . import CuraEngineBackend diff --git a/plugins/CuraProfileReader/CuraProfileReader.py b/plugins/CuraProfileReader/CuraProfileReader.py index f3ac6bab8a..5631d138aa 100644 --- a/plugins/CuraProfileReader/CuraProfileReader.py +++ b/plugins/CuraProfileReader/CuraProfileReader.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser from UM.PluginRegistry import PluginRegistry diff --git a/plugins/CuraProfileReader/__init__.py b/plugins/CuraProfileReader/__init__.py index bbf446fc5f..47149d3135 100644 --- a/plugins/CuraProfileReader/__init__.py +++ b/plugins/CuraProfileReader/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import CuraProfileReader diff --git a/plugins/CuraProfileWriter/CuraProfileWriter.py b/plugins/CuraProfileWriter/CuraProfileWriter.py index cd3681b86f..864a9b602c 100644 --- a/plugins/CuraProfileWriter/CuraProfileWriter.py +++ b/plugins/CuraProfileWriter/CuraProfileWriter.py @@ -1,6 +1,6 @@ # Copyright (c) 2015 Ultimaker B.V. # Copyright (c) 2013 David Braam -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from UM.Logger import Logger from UM.SaveFile import SaveFile diff --git a/plugins/CuraProfileWriter/__init__.py b/plugins/CuraProfileWriter/__init__.py index 244ba580cd..3500106c20 100644 --- a/plugins/CuraProfileWriter/__init__.py +++ b/plugins/CuraProfileWriter/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from . import CuraProfileWriter diff --git a/plugins/FirmwareUpdateChecker/FirmwareUpdateChecker.py b/plugins/FirmwareUpdateChecker/FirmwareUpdateChecker.py index 1c099705b1..5ee3493549 100644 --- a/plugins/FirmwareUpdateChecker/FirmwareUpdateChecker.py +++ b/plugins/FirmwareUpdateChecker/FirmwareUpdateChecker.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Extension import Extension from UM.Preferences import Preferences diff --git a/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py b/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py index 319934b211..8f299761fc 100644 --- a/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py +++ b/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Preferences import Preferences from UM.Application import Application diff --git a/plugins/FirmwareUpdateChecker/__init__.py b/plugins/FirmwareUpdateChecker/__init__.py index b7343dc565..3fae15e826 100644 --- a/plugins/FirmwareUpdateChecker/__init__.py +++ b/plugins/FirmwareUpdateChecker/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.i18n import i18nCatalog diff --git a/plugins/GCodeProfileReader/GCodeProfileReader.py b/plugins/GCodeProfileReader/GCodeProfileReader.py index 0abbcfc833..9d7f0059f9 100644 --- a/plugins/GCodeProfileReader/GCodeProfileReader.py +++ b/plugins/GCodeProfileReader/GCodeProfileReader.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import re #Regular expressions for parsing escape characters in the settings. import json diff --git a/plugins/GCodeProfileReader/__init__.py b/plugins/GCodeProfileReader/__init__.py index a5912e3cb3..d690848c96 100644 --- a/plugins/GCodeProfileReader/__init__.py +++ b/plugins/GCodeProfileReader/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import GCodeProfileReader diff --git a/plugins/GCodeReader/GCodeReader.py b/plugins/GCodeReader/GCodeReader.py index 115b802b4d..9107ec3258 100755 --- a/plugins/GCodeReader/GCodeReader.py +++ b/plugins/GCodeReader/GCodeReader.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Aleph Objects, Inc. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Application import Application from UM.Backend import Backend diff --git a/plugins/GCodeReader/__init__.py b/plugins/GCodeReader/__init__.py index 7cabeaf5a8..999dd37a37 100644 --- a/plugins/GCodeReader/__init__.py +++ b/plugins/GCodeReader/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Aleph Objects, Inc. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import GCodeReader diff --git a/plugins/GCodeWriter/GCodeWriter.py b/plugins/GCodeWriter/GCodeWriter.py index 61bd682de0..3860590ef7 100644 --- a/plugins/GCodeWriter/GCodeWriter.py +++ b/plugins/GCodeWriter/GCodeWriter.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Mesh.MeshWriter import MeshWriter from UM.Logger import Logger diff --git a/plugins/GCodeWriter/__init__.py b/plugins/GCodeWriter/__init__.py index 904deb1c19..a89332a371 100644 --- a/plugins/GCodeWriter/__init__.py +++ b/plugins/GCodeWriter/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import GCodeWriter diff --git a/plugins/ImageReader/ConfigUI.qml b/plugins/ImageReader/ConfigUI.qml index bcaf47b1fe..d2caec0220 100644 --- a/plugins/ImageReader/ConfigUI.qml +++ b/plugins/ImageReader/ConfigUI.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/plugins/ImageReader/ImageReader.py b/plugins/ImageReader/ImageReader.py index 04dce9f439..b419c0b496 100644 --- a/plugins/ImageReader/ImageReader.py +++ b/plugins/ImageReader/ImageReader.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import numpy diff --git a/plugins/ImageReader/ImageReaderUI.py b/plugins/ImageReader/ImageReaderUI.py index dc8d7015b6..40ea15f7a0 100644 --- a/plugins/ImageReader/ImageReaderUI.py +++ b/plugins/ImageReader/ImageReaderUI.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import os import threading diff --git a/plugins/ImageReader/__init__.py b/plugins/ImageReader/__init__.py index d1fb77859e..ea6ff8cceb 100644 --- a/plugins/ImageReader/__init__.py +++ b/plugins/ImageReader/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import ImageReader diff --git a/plugins/LayerView/LayerPass.py b/plugins/LayerView/LayerPass.py index 51a35fb48a..963c8c75c8 100755 --- a/plugins/LayerView/LayerPass.py +++ b/plugins/LayerView/LayerPass.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator from UM.Resources import Resources diff --git a/plugins/LayerView/LayerView.py b/plugins/LayerView/LayerView.py index f79bf5b929..d23dd90915 100755 --- a/plugins/LayerView/LayerView.py +++ b/plugins/LayerView/LayerView.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import sys diff --git a/plugins/LayerView/LayerView.qml b/plugins/LayerView/LayerView.qml index ecee766b2e..7b2b7ac2c2 100755 --- a/plugins/LayerView/LayerView.qml +++ b/plugins/LayerView/LayerView.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.2 diff --git a/plugins/LayerView/__init__.py b/plugins/LayerView/__init__.py index d1c655d223..da1a5aed19 100644 --- a/plugins/LayerView/__init__.py +++ b/plugins/LayerView/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import LayerView, LayerViewProxy from PyQt5.QtQml import qmlRegisterType, qmlRegisterSingletonType diff --git a/plugins/LegacyProfileReader/LegacyProfileReader.py b/plugins/LegacyProfileReader/LegacyProfileReader.py index 38cd9fd3c9..3d680f2b97 100644 --- a/plugins/LegacyProfileReader/LegacyProfileReader.py +++ b/plugins/LegacyProfileReader/LegacyProfileReader.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser # For reading the legacy profile INI files. import json # For reading the Dictionary of Doom. diff --git a/plugins/LegacyProfileReader/__init__.py b/plugins/LegacyProfileReader/__init__.py index 10dd298864..11157f7260 100644 --- a/plugins/LegacyProfileReader/__init__.py +++ b/plugins/LegacyProfileReader/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import LegacyProfileReader diff --git a/plugins/MachineSettingsAction/MachineSettingsAction.py b/plugins/MachineSettingsAction/MachineSettingsAction.py index 832e247d19..2c7e7c1fc0 100755 --- a/plugins/MachineSettingsAction/MachineSettingsAction.py +++ b/plugins/MachineSettingsAction/MachineSettingsAction.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import pyqtProperty, pyqtSignal from UM.FlameProfiler import pyqtSlot @@ -112,7 +112,13 @@ class MachineSettingsAction(MachineAction): if not self._global_container_stack: return 0 - return len(self._global_container_stack.getMetaDataEntry("machine_extruder_trains")) + # If there is a printer that originally is multi-extruder, it's not allowed to change the number of extruders + # It's just allowed in case of Custom FDM printers + definition_container = self._global_container_stack.getBottom() + if definition_container.getId() == "custom": + return len(self._global_container_stack.getMetaDataEntry("machine_extruder_trains")) + return 0 + @pyqtSlot(int) def setMachineExtruderCount(self, extruder_count): diff --git a/plugins/MachineSettingsAction/MachineSettingsAction.qml b/plugins/MachineSettingsAction/MachineSettingsAction.qml index dc4a3c0302..613a28f3b7 100644 --- a/plugins/MachineSettingsAction/MachineSettingsAction.qml +++ b/plugins/MachineSettingsAction/MachineSettingsAction.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/plugins/MachineSettingsAction/__init__.py b/plugins/MachineSettingsAction/__init__.py index 1c4464e9b2..b1c4a75fec 100644 --- a/plugins/MachineSettingsAction/__init__.py +++ b/plugins/MachineSettingsAction/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import MachineSettingsAction diff --git a/plugins/PerObjectSettingsTool/PerObjectCategory.qml b/plugins/PerObjectSettingsTool/PerObjectCategory.qml index be7af3256d..2dc4ba6326 100644 --- a/plugins/PerObjectSettingsTool/PerObjectCategory.qml +++ b/plugins/PerObjectSettingsTool/PerObjectCategory.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/plugins/PerObjectSettingsTool/PerObjectItem.qml b/plugins/PerObjectSettingsTool/PerObjectItem.qml index b40106abce..559ad2bf81 100644 --- a/plugins/PerObjectSettingsTool/PerObjectItem.qml +++ b/plugins/PerObjectSettingsTool/PerObjectItem.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Layouts 1.1 diff --git a/plugins/PerObjectSettingsTool/PerObjectSettingVisibilityHandler.py b/plugins/PerObjectSettingsTool/PerObjectSettingVisibilityHandler.py index 65159888b0..badca13468 100644 --- a/plugins/PerObjectSettingsTool/PerObjectSettingVisibilityHandler.py +++ b/plugins/PerObjectSettingsTool/PerObjectSettingVisibilityHandler.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from PyQt5.QtCore import QObject, pyqtProperty, pyqtSignal diff --git a/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml b/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml index 89c082f19c..c15431c9e2 100644 --- a/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml +++ b/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.2 diff --git a/plugins/PerObjectSettingsTool/PerObjectSettingsTool.py b/plugins/PerObjectSettingsTool/PerObjectSettingsTool.py index b2d14942ba..d0cb53c4f8 100644 --- a/plugins/PerObjectSettingsTool/PerObjectSettingsTool.py +++ b/plugins/PerObjectSettingsTool/PerObjectSettingsTool.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from UM.Tool import Tool from UM.Scene.Selection import Selection diff --git a/plugins/PerObjectSettingsTool/__init__.py b/plugins/PerObjectSettingsTool/__init__.py index 214820acf2..acfc35815e 100644 --- a/plugins/PerObjectSettingsTool/__init__.py +++ b/plugins/PerObjectSettingsTool/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from . import PerObjectSettingsTool from . import PerObjectSettingVisibilityHandler diff --git a/plugins/PluginBrowser/PluginBrowser.py b/plugins/PluginBrowser/PluginBrowser.py index 2d4a753014..7a3b52b99f 100644 --- a/plugins/PluginBrowser/PluginBrowser.py +++ b/plugins/PluginBrowser/PluginBrowser.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# PluginBrowser is released under the terms of the AGPLv3 or higher. +# PluginBrowser is released under the terms of the LGPLv3 or higher. from UM.Extension import Extension from UM.i18n import i18nCatalog from UM.Logger import Logger diff --git a/plugins/PluginBrowser/__init__.py b/plugins/PluginBrowser/__init__.py index 19013bd06d..d414c36a99 100644 --- a/plugins/PluginBrowser/__init__.py +++ b/plugins/PluginBrowser/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# PluginBrowser is released under the terms of the AGPLv3 or higher. +# PluginBrowser is released under the terms of the LGPLv3 or higher. from . import PluginBrowser diff --git a/plugins/RemovableDriveOutputDevice/LinuxRemovableDrivePlugin.py b/plugins/RemovableDriveOutputDevice/LinuxRemovableDrivePlugin.py index 46e3dafb71..cf889ebb12 100644 --- a/plugins/RemovableDriveOutputDevice/LinuxRemovableDrivePlugin.py +++ b/plugins/RemovableDriveOutputDevice/LinuxRemovableDrivePlugin.py @@ -1,6 +1,6 @@ # Copyright (c) 2015 Ultimaker B.V. # Copyright (c) 2013 David Braam -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from . import RemovableDrivePlugin diff --git a/plugins/RemovableDriveOutputDevice/OSXRemovableDrivePlugin.py b/plugins/RemovableDriveOutputDevice/OSXRemovableDrivePlugin.py index 6d8b5021ae..d87499273b 100644 --- a/plugins/RemovableDriveOutputDevice/OSXRemovableDrivePlugin.py +++ b/plugins/RemovableDriveOutputDevice/OSXRemovableDrivePlugin.py @@ -1,6 +1,6 @@ # Copyright (c) 2015 Ultimaker B.V. # Copyright (c) 2013 David Braam -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from . import RemovableDrivePlugin diff --git a/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py b/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py index e9ee47e810..ff930e2c31 100644 --- a/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py +++ b/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import os.path diff --git a/plugins/RemovableDriveOutputDevice/RemovableDrivePlugin.py b/plugins/RemovableDriveOutputDevice/RemovableDrivePlugin.py index 2fbd554849..7f924b8ee5 100644 --- a/plugins/RemovableDriveOutputDevice/RemovableDrivePlugin.py +++ b/plugins/RemovableDriveOutputDevice/RemovableDrivePlugin.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. import threading import time diff --git a/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py b/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py index 1c15990bf1..7a3e1ab5c1 100644 --- a/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py +++ b/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py @@ -1,6 +1,6 @@ # Copyright (c) 2015 Ultimaker B.V. # Copyright (c) 2013 David Braam -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from . import RemovableDrivePlugin import string diff --git a/plugins/RemovableDriveOutputDevice/__init__.py b/plugins/RemovableDriveOutputDevice/__init__.py index 8b46074066..dc547b7bcc 100644 --- a/plugins/RemovableDriveOutputDevice/__init__.py +++ b/plugins/RemovableDriveOutputDevice/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Platform import Platform from UM.Logger import Logger diff --git a/plugins/SliceInfoPlugin/SliceInfo.py b/plugins/SliceInfoPlugin/SliceInfo.py index a4859f6d7f..0514c4dacf 100755 --- a/plugins/SliceInfoPlugin/SliceInfo.py +++ b/plugins/SliceInfoPlugin/SliceInfo.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from cura.CuraApplication import CuraApplication from cura.Settings.ExtruderManager import ExtruderManager diff --git a/plugins/SliceInfoPlugin/SliceInfoJob.py b/plugins/SliceInfoPlugin/SliceInfoJob.py index 0ef390d058..a5667c1c13 100644 --- a/plugins/SliceInfoPlugin/SliceInfoJob.py +++ b/plugins/SliceInfoPlugin/SliceInfoJob.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Job import Job from UM.Logger import Logger from UM.Platform import Platform diff --git a/plugins/SliceInfoPlugin/__init__.py b/plugins/SliceInfoPlugin/__init__.py index 90ecfcef17..7f1dfa5336 100644 --- a/plugins/SliceInfoPlugin/__init__.py +++ b/plugins/SliceInfoPlugin/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import SliceInfo from UM.i18n import i18nCatalog catalog = i18nCatalog("cura") diff --git a/plugins/SolidView/SolidView.py b/plugins/SolidView/SolidView.py index 04a0afd77b..8f0c9a4dc1 100644 --- a/plugins/SolidView/SolidView.py +++ b/plugins/SolidView/SolidView.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.View.View import View from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator diff --git a/plugins/SolidView/__init__.py b/plugins/SolidView/__init__.py index 28ef124dcf..db2e48f489 100644 --- a/plugins/SolidView/__init__.py +++ b/plugins/SolidView/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import SolidView diff --git a/plugins/UM3NetworkPrinting/ClusterControlItem.qml b/plugins/UM3NetworkPrinting/ClusterControlItem.qml new file mode 100644 index 0000000000..6558720943 --- /dev/null +++ b/plugins/UM3NetworkPrinting/ClusterControlItem.qml @@ -0,0 +1,243 @@ +import QtQuick 2.2 +import QtQuick.Controls 1.4 + +import UM 1.3 as UM +import Cura 1.0 as Cura + +Component +{ + Item + { + id: base + property var manager: Cura.MachineManager.printerOutputDevices[0] + anchors.fill: parent + property var lineColor: "#DCDCDC" // TODO: Should be linked to theme. + property var cornerRadius: 4 // TODO: Should be linked to theme. + + visible: manager != null + + UM.I18nCatalog + { + id: catalog + name: "cura" + } + + Label + { + id: activePrintersLabel + font: UM.Theme.getFont("large") + anchors.horizontalCenter: parent.horizontalCenter + text: Cura.MachineManager.printerOutputDevices[0].name + } + Label + { + id: printerGroupLabel + anchors.top: activePrintersLabel.bottom + text: catalog.i18nc("@label", "PRINTER GROUP") + anchors.horizontalCenter: parent.horizontalCenter + font: UM.Theme.getFont("very_small") + opacity: 0.65 + } + + Rectangle + { + id: printJobArea + border.width: UM.Theme.getSize("default_lining").width + border.color: lineColor + anchors.top: printerGroupLabel.bottom + anchors.topMargin: UM.Theme.getSize("default_margin").height + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.right: parent.right + anchors.rightMargin:UM.Theme.getSize("default_margin").width + radius: cornerRadius + height: childrenRect.height + + Item + { + id: printJobTitleBar + width: parent.width + height: printJobTitleLabel.height + 2 * UM.Theme.getSize("default_margin").height + + Label + { + id: printJobTitleLabel + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.top: parent.top + anchors.topMargin: UM.Theme.getSize("default_margin").height + text: catalog.i18nc("@title", "Print jobs") + font: UM.Theme.getFont("default") + opacity: 0.75 + } + Rectangle + { + anchors.bottom: parent.bottom + height: UM.Theme.getSize("default_lining").width + color: lineColor + width: parent.width + } + } + + Column + { + id: printJobColumn + anchors.top: printJobTitleBar.bottom + anchors.topMargin: UM.Theme.getSize("default_margin").height + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.right: parent.right + anchors.rightMargin: UM.Theme.getSize("default_margin").width + //TODO; It's probably nicer to do this with a dynamic data model instead of hardcoding this. + //But you know the drill; time constraints don't result in elegant code. + Item + { + width: parent.width + height: childrenRect.height + opacity: 0.65 + Label + { + text: catalog.i18nc("@label", "Printing") + font: UM.Theme.getFont("very_small") + + } + Label + { + text: manager.numJobsPrinting + font: UM.Theme.getFont("small") + anchors.right: parent.right + } + } + Item + { + width: parent.width + height: childrenRect.height + opacity: 0.65 + Label + { + text: catalog.i18nc("@label", "Queued") + font: UM.Theme.getFont("very_small") + } + Label + { + text: manager.numJobsQueued + font: UM.Theme.getFont("small") + anchors.right: parent.right + } + } + } + OpenPanelButton + { + anchors.top: printJobColumn.bottom + anchors.left: parent.left + anchors.right: parent.right + anchors.margins: UM.Theme.getSize("default_margin").height + id: configButton + onClicked: base.manager.openPrintJobControlPanel() + text: catalog.i18nc("@action:button", "View print jobs") + } + + Item + { + // spacer + anchors.top: configButton.bottom + width: UM.Theme.getSize("default_margin").width + height: UM.Theme.getSize("default_margin").height + } + } + + + Rectangle + { + id: printersArea + border.width: UM.Theme.getSize("default_lining").width + border.color: lineColor + anchors.top: printJobArea.bottom + anchors.topMargin: UM.Theme.getSize("default_margin").height + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.right: parent.right + anchors.rightMargin:UM.Theme.getSize("default_margin").width + radius: cornerRadius + height: childrenRect.height + + Item + { + id: printersTitleBar + width: parent.width + height: printJobTitleLabel.height + 2 * UM.Theme.getSize("default_margin").height + + Label + { + id: printersTitleLabel + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.top: parent.top + anchors.topMargin: UM.Theme.getSize("default_margin").height + text: catalog.i18nc("@label:title", "Printers") + font: UM.Theme.getFont("default") + opacity: 0.75 + } + Rectangle + { + anchors.bottom: parent.bottom + height: UM.Theme.getSize("default_lining").width + color: lineColor + width: parent.width + } + } + Column + { + id: printersColumn + anchors.top: printersTitleBar.bottom + anchors.topMargin: UM.Theme.getSize("default_margin").height + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.right: parent.right + anchors.rightMargin: UM.Theme.getSize("default_margin").width + + Repeater + { + model: manager.connectedPrintersTypeCount + Item + { + width: parent.width + height: childrenRect.height + opacity: 0.65 + Label + { + text: modelData.machine_type + font: UM.Theme.getFont("very_small") + } + + Label + { + text: modelData.count + font: UM.Theme.getFont("small") + anchors.right: parent.right + } + } + } + } + OpenPanelButton + { + anchors.top: printersColumn.bottom + anchors.left: parent.left + anchors.right: parent.right + anchors.margins: UM.Theme.getSize("default_margin").height + id: printerConfigButton + onClicked: base.manager.openPrinterControlPanel() + + text: catalog.i18nc("@action:button", "View printers") + } + + Item + { + // spacer + anchors.top: printerConfigButton.bottom + width: UM.Theme.getSize("default_margin").width + height: UM.Theme.getSize("default_margin").height + } + } + } +} \ No newline at end of file diff --git a/plugins/UM3NetworkPrinting/ClusterMonitorItem.qml b/plugins/UM3NetworkPrinting/ClusterMonitorItem.qml new file mode 100644 index 0000000000..d39cdab81e --- /dev/null +++ b/plugins/UM3NetworkPrinting/ClusterMonitorItem.qml @@ -0,0 +1,108 @@ +import QtQuick 2.2 +import QtQuick.Controls 1.4 +import QtQuick.Controls.Styles 1.4 + +import UM 1.3 as UM +import Cura 1.0 as Cura + +Component +{ + Rectangle + { + width: maximumWidth + height: maximumHeight + color: "#FFFFFF" // TODO; Should not be hardcoded. + + property var emphasisColor: "#44c0ff" //TODO: should be linked to theme. + property var lineColor: "#DCDCDC" // TODO: Should be linked to theme. + property var cornerRadius: 4 // TODO: Should be linked to theme. + UM.I18nCatalog + { + id: catalog + name: "cura" + } + + Label + { + id: activePrintersLabel + font: UM.Theme.getFont("large") + + text: + { + if (OutputDevice.connectedPrinters.length == 0){ + return catalog.i18nc("@label: arg 1 is group name", "%1 is not set up to host a group of connected Ultimaker 3 printers").arg(Cura.MachineManager.printerOutputDevices[0].name) + } else { + return "" + } + } + anchors.left: parent.left + anchors.right: parent.right + anchors.top: parent.top + anchors.horizontalCenter: parent.horizontalCenter + anchors.topMargin: UM.Theme.getSize("default_margin").height + + visible: OutputDevice.connectedPrinters.length == 0 + } + + Item + { + anchors.topMargin: UM.Theme.getSize("default_margin").height + anchors.top: parent.top + anchors.horizontalCenter: parent.horizontalCenter + + width: Math.min(800, maximumWidth) + height: children.height + visible: OutputDevice.connectedPrinters.length != 0 + + Label + { + id: addRemovePrintersLabel + anchors.right: parent.right + text: "Add / remove printers" + } + + MouseArea + { + anchors.fill: addRemovePrintersLabel + onClicked: Cura.MachineManager.printerOutputDevices[0].openPrinterControlPanel() + } + } + + + ScrollView + { + id: printerScrollView + anchors.margins: UM.Theme.getSize("default_margin").width + anchors.top: activePrintersLabel.bottom + anchors.bottom: parent.bottom + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_lining").width // To ensure border can be drawn. + anchors.rightMargin: UM.Theme.getSize("default_lining").width + anchors.right: parent.right + + ListView + { + anchors.fill: parent + spacing: -UM.Theme.getSize("default_lining").height + + model: OutputDevice.connectedPrinters + + delegate: PrinterInfoBlock + { + printer: modelData + width: Math.min(800, maximumWidth) + height: 125 + + // Add a 1 pix margin, as the border is sometimes cut off otherwise. + anchors.horizontalCenter: parent.horizontalCenter + } + } + } + + PrinterVideoStream + { + visible: OutputDevice.selectedPrinterName != "" + anchors.fill:parent + } + } +} diff --git a/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml b/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml index 216423b5d1..5ea7d77d8a 100644 --- a/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml +++ b/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml @@ -272,6 +272,28 @@ Cura.MachineAction text: base.selectedPrinter ? base.selectedPrinter.ipAddress : "" } } + + Label + { + width: parent.width + wrapMode: Text.WordWrap + text:{ + // The property cluster size does not exist for older UM3 devices. + if(base.selectedPrinter.clusterSize == null || base.selectedPrinter.clusterSize == 1) + { + return ""; + } + else if (base.selectedPrinter.clusterSize === 0) + { + return catalog.i18nc("@label", "Cura Connect: This printer is not set up to host a group of connected Ultimaker 3 printers."); + } + else + { + return catalog.i18nc("@label", "Cura Connect: This printer is set up to host a group of %1 connected Ultimaker 3 printers".arg(base.selectedPrinter.clusterSize)); + } + } + + } Label { width: parent.width diff --git a/plugins/UM3NetworkPrinting/NetworkClusterPrinterOutputDevice.py b/plugins/UM3NetworkPrinting/NetworkClusterPrinterOutputDevice.py new file mode 100644 index 0000000000..55f9d1247b --- /dev/null +++ b/plugins/UM3NetworkPrinting/NetworkClusterPrinterOutputDevice.py @@ -0,0 +1,638 @@ +import datetime +import getpass +import gzip +import json +import os +import os.path +import time + +from enum import Enum +from PyQt5.QtNetwork import QNetworkRequest, QHttpPart, QHttpMultiPart +from PyQt5.QtCore import QUrl, QByteArray, pyqtSlot, pyqtProperty, QCoreApplication, QTimer, pyqtSignal, QObject +from PyQt5.QtGui import QDesktopServices +from PyQt5.QtNetwork import QNetworkAccessManager, QNetworkReply +from PyQt5.QtQml import QQmlComponent, QQmlContext +from UM.Application import Application +from UM.Logger import Logger +from UM.Message import Message +from UM.OutputDevice import OutputDeviceError +from UM.i18n import i18nCatalog + +from . import NetworkPrinterOutputDevice + + +i18n_catalog = i18nCatalog("cura") + + +class OutputStage(Enum): + ready = 0 + uploading = 2 + + +class NetworkClusterPrinterOutputDevice(NetworkPrinterOutputDevice.NetworkPrinterOutputDevice): + printJobsChanged = pyqtSignal() + printersChanged = pyqtSignal() + selectedPrinterChanged = pyqtSignal() + + def __init__(self, key, address, properties, api_prefix, plugin_path): + super().__init__(key, address, properties, api_prefix) + # Store the address of the master. + self._master_address = address + name_property = properties.get(b"name", b"") + if name_property: + name = name_property.decode("utf-8") + else: + name = key + + self._plugin_path = plugin_path + + self.setName(name) + description = i18n_catalog.i18nc("@action:button Preceded by 'Ready to'.", "Print over network") + self.setShortDescription(description) + self.setDescription(description) + + self._stage = OutputStage.ready + host_override = os.environ.get("CLUSTER_OVERRIDE_HOST", "") + if host_override: + Logger.log( + "w", + "Environment variable CLUSTER_OVERRIDE_HOST is set to [%s], cluster hosts are now set to this host", + host_override) + self._host = "http://" + host_override + else: + self._host = "http://" + address + + # is the same as in NetworkPrinterOutputDevicePlugin + self._cluster_api_version = "1" + self._cluster_api_prefix = "/cluster-api/v" + self._cluster_api_version + "/" + self._api_base_uri = self._host + self._cluster_api_prefix + + self._file_name = None + self._progress_message = None + self._request = None + self._reply = None + + # The main reason to keep the 'multipart' form data on the object + # is to prevent the Python GC from claiming it too early. + self._multipart = None + + self._print_view = None + self._request_job = [] + + self._monitor_view_qml_path = os.path.join(os.path.dirname(os.path.abspath(__file__)), "ClusterMonitorItem.qml") + self._control_view_qml_path = os.path.join(os.path.dirname(os.path.abspath(__file__)), "ClusterControlItem.qml") + + self._print_jobs = [] + self._print_job_by_printer_uuid = {} + self._print_job_by_uuid = {} # Print jobs by their own uuid + self._printers = [] + self._printers_dict = {} # by unique_name + + self._connected_printers_type_count = [] + self._automatic_printer = {"unique_name": "", "friendly_name": "Automatic"} # empty unique_name IS automatic selection + self._selected_printer = self._automatic_printer + + self._cluster_status_update_timer = QTimer() + self._cluster_status_update_timer.setInterval(5000) + self._cluster_status_update_timer.setSingleShot(False) + self._cluster_status_update_timer.timeout.connect(self._requestClusterStatus) + + self._can_pause = False + self._can_abort = False + self._can_pre_heat_bed = False + self._cluster_size = int(properties.get(b"cluster_size", 0)) + + self._cleanupRequest() + + #These are texts that are to be translated for future features. + temporary_translation = i18n_catalog.i18n("This printer is not set up to host a group of connected Ultimaker 3 printers.") + temporary_translation2 = i18n_catalog.i18nc("Count is number of printers.", "This printer is the host for a group of {count} connected Ultimaker 3 printers.").format(count = 3) + temporary_translation3 = i18n_catalog.i18n("{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate.") #When finished. + temporary_translation4 = i18n_catalog.i18n("{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing.") #When configuration changed. + + @pyqtProperty(QObject, notify=selectedPrinterChanged) + def controlItem(self): + # TODO: Probably not the nicest way to do this. This needs to be done better at some point in time. + if not self._control_component: + self._createControlViewFromQML() + name = self._selected_printer.get("friendly_name") + if name == self._automatic_printer.get("friendly_name") or name == "": + return self._control_item + # Let cura use the default. + return None + + @pyqtSlot(int, result = str) + def getTimeCompleted(self, time_remaining): + current_time = time.time() + datetime_completed = datetime.datetime.fromtimestamp(current_time + time_remaining) + return "{hour:02d}:{minute:02d}".format(hour = datetime_completed.hour, minute = datetime_completed.minute) + + @pyqtSlot(int, result = str) + def getDateCompleted(self, time_remaining): + current_time = time.time() + datetime_completed = datetime.datetime.fromtimestamp(current_time + time_remaining) + return (datetime_completed.strftime("%a %b ") + "{day}".format(day=datetime_completed.day)).upper() + + @pyqtProperty(int, constant = True) + def clusterSize(self): + return self._cluster_size + + @pyqtProperty(str, notify=selectedPrinterChanged) + def name(self): + # Show the name of the selected printer. + # This is not the nicest way to do this, but changes to the Cura UI are required otherwise. + name = self._selected_printer.get("friendly_name") + if name != self._automatic_printer.get("friendly_name"): + return name + # Return name of cluster master. + return self._properties.get(b"name", b"").decode("utf-8") + + def connect(self): + super().connect() + self._cluster_status_update_timer.start() + + def close(self): + super().close() + self._cluster_status_update_timer.stop() + + def _requestClusterStatus(self): + # TODO: Handle timeout. We probably want to know if the cluster is still reachable or not. + url = QUrl(self._api_base_uri + "print_jobs/") + print_jobs_request = QNetworkRequest(url) + self._addUserAgentHeader(print_jobs_request) + self._manager.get(print_jobs_request) + # See _finishedPrintJobsRequest() + + url = QUrl(self._api_base_uri + "printers/") + printers_request = QNetworkRequest(url) + self._addUserAgentHeader(printers_request) + self._manager.get(printers_request) + # See _finishedPrintersRequest() + + def _finishedPrintJobsRequest(self, reply): + try: + json_data = json.loads(bytes(reply.readAll()).decode("utf-8")) + except json.decoder.JSONDecodeError: + Logger.log("w", "Received an invalid print job state message: Not valid JSON.") + return + self.setPrintJobs(json_data) + + def _finishedPrintersRequest(self, reply): + try: + json_data = json.loads(bytes(reply.readAll()).decode("utf-8")) + except json.decoder.JSONDecodeError: + Logger.log("w", "Received an invalid print job state message: Not valid JSON.") + return + self.setPrinters(json_data) + + def materialHotendChangedMessage(self, callback): + pass # Do nothing. + + def _startCameraStream(self): + ## Request new image + url = QUrl("http://" + self._printers_dict[self._selected_printer["unique_name"]]["ip_address"] + ":8080/?action=stream") + self._image_request = QNetworkRequest(url) + self._addUserAgentHeader(self._image_request) + self._image_reply = self._manager.get(self._image_request) + self._image_reply.downloadProgress.connect(self._onStreamDownloadProgress) + + def spawnPrintView(self): + if self._print_view is None: + path = QUrl.fromLocalFile(os.path.join(self._plugin_path, "PrintWindow.qml")) + component = QQmlComponent(Application.getInstance()._engine, path) + + self._print_context = QQmlContext(Application.getInstance()._engine.rootContext()) + self._print_context.setContextProperty("OutputDevice", self) + self._print_view = component.create(self._print_context) + + if component.isError(): + Logger.log("e", " Errors creating component: \n%s", "\n".join( + [e.toString() for e in component.errors()])) + + if self._print_view is not None: + self._print_view.show() + + ## Store job info, show Print view for settings + def requestWrite(self, nodes, file_name=None, filter_by_machine=False, file_handler=None, **kwargs): + self._selected_printer = self._automatic_printer # reset to default option + self._request_job = [nodes, file_name, filter_by_machine, file_handler, kwargs] + + if self._stage != OutputStage.ready: + if self._error_message: + self._error_message.hide() + self._error_message = Message( + i18n_catalog.i18nc("@info:status", + "Sending new jobs (temporarily) blocked, still sending the previous print job.")) + self._error_message.show() + return + + if len(self._printers) > 1: + self.spawnPrintView() # Ask user how to print it. + elif len(self._printers) == 1: + # If there is only one printer, don't bother asking. + self.selectAutomaticPrinter() + self.sendPrintJob() + else: + # Cluster has no printers, warn the user of this. + if self._error_message: + self._error_message.hide() + self._error_message = Message( + i18n_catalog.i18nc("@info:status", + "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers.")) + self._error_message.show() + + ## Actually send the print job, called from the dialog + # :param: require_printer_name: name of printer, or "" + @pyqtSlot() + def sendPrintJob(self): + nodes, file_name, filter_by_machine, file_handler, kwargs = self._request_job + require_printer_name = self._selected_printer["unique_name"] + + self._send_gcode_start = time.time() + Logger.log("d", "Sending print job [%s] to host..." % file_name) + + if self._stage != OutputStage.ready: + Logger.log("d", "Unable to send print job as the state is %s", self._stage) + raise OutputDeviceError.DeviceBusyError() + self._stage = OutputStage.uploading + + self._file_name = "%s.gcode.gz" % file_name + self._showProgressMessage() + + self._request = self._buildSendPrintJobHttpRequest(require_printer_name) + self._reply = self._manager.post(self._request, self._multipart) + self._reply.uploadProgress.connect(self._onUploadProgress) + # See _finishedPostPrintJobRequest() + + def _buildSendPrintJobHttpRequest(self, require_printer_name): + api_url = QUrl(self._api_base_uri + "print_jobs/") + request = QNetworkRequest(api_url) + # Create multipart request and add the g-code. + self._multipart = QHttpMultiPart(QHttpMultiPart.FormDataType) + + # Add gcode + part = QHttpPart() + part.setHeader(QNetworkRequest.ContentDispositionHeader, + 'form-data; name="file"; filename="%s"' % self._file_name) + + gcode = getattr(Application.getInstance().getController().getScene(), "gcode_list") + compressed_gcode = self._compressGcode(gcode) + if compressed_gcode is None: + return # User aborted print, so stop trying. + + part.setBody(compressed_gcode) + self._multipart.append(part) + + # require_printer_name "" means automatic + if require_printer_name: + self._multipart.append(self.__createKeyValueHttpPart("require_printer_name", require_printer_name)) + user_name = self.__get_username() + if user_name is None: + user_name = "unknown" + self._multipart.append(self.__createKeyValueHttpPart("owner", user_name)) + + self._addUserAgentHeader(request) + return request + + def _compressGcode(self, gcode): + self._compressing_print = True + batched_line = "" + max_chars_per_line = int(1024 * 1024 / 4) # 1 / 4 MB + + byte_array_file_data = b"" + + def _compressDataAndNotifyQt(data_to_append): + compressed_data = gzip.compress(data_to_append.encode("utf-8")) + QCoreApplication.processEvents() # Ensure that the GUI does not freeze. + # Pretend that this is a response, as zipping might take a bit of time. + self._last_response_time = time.time() + return compressed_data + + if gcode is None: + Logger.log("e", "Unable to find sliced gcode, returning empty.") + return byte_array_file_data + + for line in gcode: + if not self._compressing_print: + self._progress_message.hide() + return # Stop trying to zip, abort was called. + batched_line += line + # if the gcode was read from a gcode file, self._gcode will be a list of all lines in that file. + # Compressing line by line in this case is extremely slow, so we need to batch them. + if len(batched_line) < max_chars_per_line: + continue + byte_array_file_data += _compressDataAndNotifyQt(batched_line) + batched_line = "" + + # Also compress the leftovers. + if batched_line: + byte_array_file_data += _compressDataAndNotifyQt(batched_line) + + return byte_array_file_data + + def __createKeyValueHttpPart(self, key, value): + metadata_part = QHttpPart() + metadata_part.setHeader(QNetworkRequest.ContentTypeHeader, 'text/plain') + metadata_part.setHeader(QNetworkRequest.ContentDispositionHeader, 'form-data; name="%s"' % (key)) + metadata_part.setBody(bytearray(value, "utf8")) + return metadata_part + + def __get_username(self): + try: + return getpass.getuser() + except: + Logger.log("d", "Could not get the system user name, returning 'unknown' instead.") + return None + + def _finishedPrintJobPostRequest(self, reply): + self._stage = OutputStage.ready + if self._progress_message: + self._progress_message.hide() + self._progress_message = None + self.writeFinished.emit(self) + + if reply.error(): + self._showRequestFailedMessage(reply) + self.writeError.emit(self) + else: + self._showRequestSucceededMessage() + self.writeSuccess.emit(self) + + self._cleanupRequest() + + def _showRequestFailedMessage(self, reply): + if reply is not None: + Logger.log("w", "Unable to send print job to group {cluster_name}: {error_string} ({error})".format( + cluster_name = self.getName(), + error_string = str(reply.errorString()), + error = str(reply.error()))) + error_message_template = i18n_catalog.i18nc("@info:status", "Unable to send print job to group {cluster_name}.") + message = Message(text=error_message_template.format( + cluster_name = self.getName())) + message.show() + + def _showRequestSucceededMessage(self): + confirmation_message_template = i18n_catalog.i18nc( + "@info:status", + "Sent {file_name} to group {cluster_name}." + ) + file_name = os.path.basename(self._file_name).split(".")[0] + message_text = confirmation_message_template.format(cluster_name = self.getName(), file_name = file_name) + message = Message(text=message_text) + button_text = i18n_catalog.i18nc("@action:button", "Show print jobs") + button_tooltip = i18n_catalog.i18nc("@info:tooltip", "Opens the print jobs interface in your browser.") + message.addAction("open_browser", button_text, "globe", button_tooltip) + message.actionTriggered.connect(self._onMessageActionTriggered) + message.show() + + def setPrintJobs(self, print_jobs): + #TODO: hack, last seen messes up the check, so drop it. + for job in print_jobs: + del job["last_seen"] + # Strip any extensions + job["name"] = self._removeGcodeExtension(job["name"]) + + if self._print_jobs != print_jobs: + old_print_jobs = self._print_jobs + self._print_jobs = print_jobs + + self._notifyFinishedPrintJobs(old_print_jobs, print_jobs) + + # Yes, this is a hacky way of doing it, but it's quick and the API doesn't give the print job per printer + # for some reason. ugh. + self._print_job_by_printer_uuid = {} + self._print_job_by_uuid = {} + for print_job in print_jobs: + if "printer_uuid" in print_job and print_job["printer_uuid"] is not None: + self._print_job_by_printer_uuid[print_job["printer_uuid"]] = print_job + self._print_job_by_uuid[print_job["uuid"]] = print_job + self.printJobsChanged.emit() + + def _removeGcodeExtension(self, name): + parts = name.split(".") + if parts[-1].upper() == "GZ": + parts = parts[:-1] + if parts[-1].upper() == "GCODE": + parts = parts[:-1] + return ".".join(parts) + + def _notifyFinishedPrintJobs(self, old_print_jobs, new_print_jobs): + """Notify the user when any of their print jobs have just completed. + + Arguments: + + old_print_jobs -- the previous list of print job status information as returned by the cluster REST API. + new_print_jobs -- the current list of print job status information as returned by the cluster REST API. + """ + if old_print_jobs is None: + return + + username = self.__get_username() + if username is None: + return + + our_old_print_jobs = self.__filterOurPrintJobs(old_print_jobs) + our_old_not_finished_print_jobs = [pj for pj in our_old_print_jobs if pj["status"] != "wait_cleanup"] + + our_new_print_jobs = self.__filterOurPrintJobs(new_print_jobs) + our_new_finished_print_jobs = [pj for pj in our_new_print_jobs if pj["status"] == "wait_cleanup"] + + old_not_finished_print_job_uuids = set([pj["uuid"] for pj in our_old_not_finished_print_jobs]) + + for print_job in our_new_finished_print_jobs: + if print_job["uuid"] in old_not_finished_print_job_uuids: + + printer_name = self.__getPrinterNameFromUuid(print_job["printer_uuid"]) + if printer_name is None: + printer_name = i18n_catalog.i18nc("@info:status", "Unknown printer") + + message_text = (i18n_catalog.i18nc("@info:status", + "Printer '{printer_name}' has finished printing '{job_name}'.") + .format(printer_name=printer_name, job_name=print_job["name"])) + message = Message(text=message_text, title=i18n_catalog.i18nc("@info:status", "Print finished")) + Application.getInstance().showMessage(message) + Application.getInstance().showToastMessage( + i18n_catalog.i18nc("@info:status", "Print finished"), + message_text) + + def __filterOurPrintJobs(self, print_jobs): + username = self.__get_username() + return [print_job for print_job in print_jobs if print_job["owner"] == username] + + def __getPrinterNameFromUuid(self, printer_uuid): + for printer in self._printers: + if printer["uuid"] == printer_uuid: + return printer["friendly_name"] + return None + + def setPrinters(self, printers): + if self._printers != printers: + self._connected_printers_type_count = [] + printers_count = {} + self._printers = printers + self._printers_dict = dict((p["unique_name"], p) for p in printers) # for easy lookup by unique_name + + for printer in printers: + variant = printer["machine_variant"] + if variant in printers_count: + printers_count[variant] += 1 + else: + printers_count[variant] = 1 + for type in printers_count: + self._connected_printers_type_count.append({"machine_type": type, "count": printers_count[type]}) + self.printersChanged.emit() + + @pyqtProperty("QVariantList", notify=printersChanged) + def connectedPrintersTypeCount(self): + return self._connected_printers_type_count + + @pyqtProperty("QVariantList", notify=printersChanged) + def connectedPrinters(self): + return self._printers + + @pyqtProperty(int, notify=printJobsChanged) + def numJobsPrinting(self): + num_jobs_printing = 0 + for job in self._print_jobs: + if job["status"] == "printing": + num_jobs_printing += 1 + return num_jobs_printing + + @pyqtProperty(int, notify=printJobsChanged) + def numJobsQueued(self): + num_jobs_queued = 0 + for job in self._print_jobs: + if job["status"] == "queued": + num_jobs_queued += 1 + return num_jobs_queued + + @pyqtProperty("QVariantMap", notify=printJobsChanged) + def printJobsByUUID(self): + return self._print_job_by_uuid + + @pyqtProperty("QVariantMap", notify=printJobsChanged) + def printJobsByPrinterUUID(self): + return self._print_job_by_printer_uuid + + @pyqtProperty("QVariantList", notify=printJobsChanged) + def printJobs(self): + return self._print_jobs + + @pyqtProperty("QVariantList", notify=printersChanged) + def printers(self): + return [self._automatic_printer, ] + self._printers + + @pyqtSlot(str, str) + def selectPrinter(self, unique_name, friendly_name): + self.stopCamera() + self._selected_printer = {"unique_name": unique_name, "friendly_name": friendly_name} + Logger.log("d", "Selected printer: %s %s", friendly_name, unique_name) + # TODO: Probably not the nicest way to do this. This needs to be done better at some point in time. + if unique_name == "": + self._address = self._master_address + else: + self._address = self._printers_dict[self._selected_printer["unique_name"]]["ip_address"] + + self.selectedPrinterChanged.emit() + + def _updateJobState(self, job_state): + name = self._selected_printer.get("friendly_name") + if name == "" or name == "Automatic": + # TODO: This is now a bit hacked; If no printer is selected, don't show job state. + if self._job_state != "": + self._job_state = "" + self.jobStateChanged.emit() + else: + if self._job_state != job_state: + self._job_state = job_state + self.jobStateChanged.emit() + + @pyqtSlot() + def selectAutomaticPrinter(self): + self.stopCamera() + self._selected_printer = self._automatic_printer + self.selectedPrinterChanged.emit() + + @pyqtProperty("QVariant", notify=selectedPrinterChanged) + def selectedPrinterName(self): + return self._selected_printer.get("unique_name", "") + + def getPrintJobsUrl(self): + return self._host + "/print_jobs" + + def getPrintersUrl(self): + return self._host + "/printers" + + def _showProgressMessage(self): + progress_message_template = i18n_catalog.i18nc("@info:progress", + "Sending {file_name} to group {cluster_name}") + file_name = os.path.basename(self._file_name).split(".")[0] + self._progress_message = Message(progress_message_template.format(file_name = file_name, cluster_name = self.getName()), 0, False, -1) + self._progress_message.addAction("Abort", i18n_catalog.i18nc("@action:button", "Cancel"), None, "") + self._progress_message.actionTriggered.connect(self._onMessageActionTriggered) + self._progress_message.show() + + def _addUserAgentHeader(self, request): + request.setRawHeader(b"User-agent", b"CuraPrintClusterOutputDevice Plugin") + + def _cleanupRequest(self): + self._reply = None + self._request = None + self._multipart = None + self._stage = OutputStage.ready + self._file_name = None + + def _onFinished(self, reply): + super()._onFinished(reply) + reply_url = reply.url().toString() + status_code = reply.attribute(QNetworkRequest.HttpStatusCodeAttribute) + if status_code == 500: + Logger.log("w", "Request to {url} returned a 500.".format(url = reply_url)) + return + if reply.error() == QNetworkReply.ContentOperationNotPermittedError: + # It was probably "/api/v1/materials" for legacy UM3 + return + if reply.error() == QNetworkReply.ContentNotFoundError: + # It was probably "/api/v1/print_job" for legacy UM3 + return + + if reply.operation() == QNetworkAccessManager.PostOperation: + if self._cluster_api_prefix + "print_jobs" in reply_url: + self._finishedPrintJobPostRequest(reply) + return + + # We need to do this check *after* we process the post operation! + # If the sending of g-code is cancelled by the user it will result in an error, but we do need to handle this. + if reply.error() != QNetworkReply.NoError: + Logger.log("e", "After requesting [%s] we got a network error [%s]. Not processing anything...", reply_url, reply.error()) + return + + elif reply.operation() == QNetworkAccessManager.GetOperation: + if self._cluster_api_prefix + "print_jobs" in reply_url: + self._finishedPrintJobsRequest(reply) + elif self._cluster_api_prefix + "printers" in reply_url: + self._finishedPrintersRequest(reply) + + @pyqtSlot() + def openPrintJobControlPanel(self): + Logger.log("d", "Opening print job control panel...") + QDesktopServices.openUrl(QUrl(self.getPrintJobsUrl())) + + @pyqtSlot() + def openPrinterControlPanel(self): + Logger.log("d", "Opening printer control panel...") + QDesktopServices.openUrl(QUrl(self.getPrintersUrl())) + + def _onMessageActionTriggered(self, message, action): + if action == "open_browser": + QDesktopServices.openUrl(QUrl(self.getPrintJobsUrl())) + + if action == "Abort": + Logger.log("d", "User aborted sending print to remote.") + self._progress_message.hide() + self._compressing_print = False + self._stage = OutputStage.ready + if self._reply: + self._reply.abort() + self._reply = None + Application.getInstance().showPrintMonitor.emit(False) diff --git a/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py b/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py index 8c7a07ef4b..d489402d8e 100755 --- a/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py +++ b/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.i18n import i18nCatalog from UM.Application import Application @@ -17,7 +17,7 @@ import cura.Settings.ExtruderManager from PyQt5.QtNetwork import QHttpMultiPart, QHttpPart, QNetworkRequest, QNetworkAccessManager, QNetworkReply from PyQt5.QtCore import QUrl, QTimer, pyqtSignal, pyqtProperty, pyqtSlot, QCoreApplication -from PyQt5.QtGui import QImage +from PyQt5.QtGui import QImage, QColor from PyQt5.QtWidgets import QMessageBox import json @@ -102,7 +102,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice): self._target_bed_temperature = 0 self._processing_preheat_requests = True - self.setPriority(2) # Make sure the output device gets selected above local file output + self.setPriority(3) # Make sure the output device gets selected above local file output self.setName(key) self.setShortDescription(i18n_catalog.i18nc("@action:button Preceded by 'Ready to'.", "Print over network")) self.setDescription(i18n_catalog.i18nc("@properties:tooltip", "Print over network")) @@ -1007,7 +1007,8 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice): reply_url = reply.url().toString() if reply.operation() == QNetworkAccessManager.GetOperation: - if "printer" in reply_url: # Status update from printer. + # "printer" is also in "printers", therefore _api_prefix is added. + if self._api_prefix + "printer" in reply_url: # Status update from printer. if status_code == 200: if self._connection_state == ConnectionState.connecting: self.setConnectionState(ConnectionState.connected) @@ -1025,7 +1026,7 @@ class NetworkPrinterOutputDevice(PrinterOutputDevice): else: Logger.log("w", "We got an unexpected status (%s) while requesting printer state", status_code) pass # TODO: Handle errors - elif "print_job" in reply_url: # Status update from print_job: + elif self._api_prefix + "print_job" in reply_url: # Status update from print_job: if status_code == 200: try: json_data = json.loads(bytes(reply.readAll()).decode("utf-8")) diff --git a/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevicePlugin.py b/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevicePlugin.py index 5f2ed1badc..0ed745d9d8 100644 --- a/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevicePlugin.py +++ b/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevicePlugin.py @@ -1,26 +1,31 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. - -from UM.OutputDevice.OutputDevicePlugin import OutputDevicePlugin -from . import NetworkPrinterOutputDevice - -from zeroconf import Zeroconf, ServiceBrowser, ServiceStateChange, ServiceInfo # type: ignore -from UM.Logger import Logger -from UM.Signal import Signal, signalemitter -from UM.Application import Application -from UM.Preferences import Preferences - -from PyQt5.QtNetwork import QNetworkRequest, QNetworkAccessManager, QNetworkReply -from PyQt5.QtCore import QUrl +# Cura is released under the terms of the LGPLv3 or higher. +import os import time import json +from PyQt5.QtCore import QObject, pyqtProperty, pyqtSignal, pyqtSlot +from PyQt5.QtCore import QUrl +from PyQt5.QtGui import QDesktopServices +from PyQt5.QtNetwork import QNetworkRequest, QNetworkAccessManager, QNetworkReply +from PyQt5.QtQml import QQmlComponent, QQmlContext +from UM.Application import Application +from UM.Logger import Logger +from UM.OutputDevice.OutputDevicePlugin import OutputDevicePlugin +from UM.PluginRegistry import PluginRegistry +from UM.Preferences import Preferences +from UM.Signal import Signal, signalemitter +from zeroconf import Zeroconf, ServiceBrowser, ServiceStateChange, ServiceInfo # type: ignore + +from . import NetworkPrinterOutputDevice, NetworkClusterPrinterOutputDevice + + ## This plugin handles the connection detection & creation of output device objects for the UM3 printer. # Zero-Conf is used to detect printers, which are saved in a dict. # If we discover a printer that has the same key as the active machine instance a connection is made. @signalemitter -class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin): +class NetworkPrinterOutputDevicePlugin(QObject, OutputDevicePlugin): def __init__(self): super().__init__() self._zero_conf = None @@ -29,6 +34,8 @@ class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin): self._api_version = "1" self._api_prefix = "/api/v" + self._api_version + "/" + self._cluster_api_version = "1" + self._cluster_api_prefix = "/cluster-api/v" + self._cluster_api_version + "/" self._network_manager = QNetworkAccessManager() self._network_manager.finished.connect(self._onNetworkRequestFinished) @@ -47,6 +54,8 @@ class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin): self._preferences.addPreference("um3networkprinting/manual_instances", "") # A comma-separated list of ip adresses or hostnames self._manual_instances = self._preferences.getValue("um3networkprinting/manual_instances").split(",") + self._network_requests_buffer = {} # store api responses until data is complete + addPrinterSignal = Signal() removePrinterSignal = Signal() printerListChanged = Signal() @@ -91,6 +100,7 @@ class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin): self.addPrinter(instance_name, address, properties) self.checkManualPrinter(address) + self.checkClusterPrinter(address) def removeManualPrinter(self, key, address = None): if key in self._printers: @@ -105,18 +115,26 @@ class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin): def checkManualPrinter(self, address): # Check if a printer exists at this address # If a printer responds, it will replace the preliminary printer created above - url = QUrl("http://" + address + self._api_prefix + "system") + # origin=manual is for tracking back the origin of the call + url = QUrl("http://" + address + self._api_prefix + "system?origin=manual_name") name_request = QNetworkRequest(url) self._network_manager.get(name_request) + def checkClusterPrinter(self, address): + cluster_url = QUrl("http://" + address + self._cluster_api_prefix + "printers/?origin=check_cluster") + cluster_request = QNetworkRequest(cluster_url) + self._network_manager.get(cluster_request) + ## Handler for all requests that have finished. def _onNetworkRequestFinished(self, reply): reply_url = reply.url().toString() status_code = reply.attribute(QNetworkRequest.HttpStatusCodeAttribute) if reply.operation() == QNetworkAccessManager.GetOperation: - if "system" in reply_url: # Name returned from printer. + address = reply.url().host() + if "origin=manual_name" in reply_url: # Name returned from printer. if status_code == 200: + try: system_info = json.loads(bytes(reply.readAll()).decode("utf-8")) except json.JSONDecodeError: @@ -125,28 +143,51 @@ class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin): except UnicodeDecodeError: Logger.log("e", "Printer returned incorrect UTF-8.") return - address = reply.url().host() - instance_name = "manual:%s" % address - machine = "unknown" - if "variant" in system_info: - variant = system_info["variant"] - if variant == "Ultimaker 3": - machine = "9066" - elif variant == "Ultimaker 3 Extended": - machine = "9511" - properties = { - b"name": system_info["name"].encode("utf-8"), - b"address": address.encode("utf-8"), - b"firmware_version": system_info["firmware"].encode("utf-8"), - b"manual": b"true", - b"machine": machine.encode("utf-8") - } - if instance_name in self._printers: - # Only replace the printer if it is still in the list of (manual) printers - self.removePrinter(instance_name) - self.addPrinter(instance_name, address, properties) + if address not in self._network_requests_buffer: + self._network_requests_buffer[address] = {} + self._network_requests_buffer[address]["system"] = system_info + elif "origin=check_cluster" in reply_url: + if address not in self._network_requests_buffer: + self._network_requests_buffer[address] = {} + if status_code == 200: + # We know it's a cluster printer + Logger.log("d", "Cluster printer detected: [%s]", reply.url()) + self._network_requests_buffer[address]["cluster"] = True + else: + Logger.log("d", "This url is not from a cluster printer: [%s]", reply.url()) + self._network_requests_buffer[address]["cluster"] = False + + # Both the system call and cluster call are finished + if (address in self._network_requests_buffer and + "system" in self._network_requests_buffer[address] and + "cluster" in self._network_requests_buffer[address]): + + instance_name = "manual:%s" % address + system_info = self._network_requests_buffer[address]["system"] + is_cluster = self._network_requests_buffer[address]["cluster"] + machine = "unknown" + if "variant" in system_info: + variant = system_info["variant"] + if variant == "Ultimaker 3": + machine = "9066" + elif variant == "Ultimaker 3 Extended": + machine = "9511" + + properties = { + b"name": system_info["name"].encode("utf-8"), + b"address": address.encode("utf-8"), + b"firmware_version": system_info["firmware"].encode("utf-8"), + b"manual": b"true", + b"machine": machine.encode("utf-8") + } + if instance_name in self._printers: + # Only replace the printer if it is still in the list of (manual) printers + self.removePrinter(instance_name) + self.addPrinter(instance_name, address, properties, force_cluster=is_cluster) + + del self._network_requests_buffer[address] ## Stop looking for devices on network. def stop(self): @@ -175,8 +216,13 @@ class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin): self._printers[key].connectionStateChanged.disconnect(self._onPrinterConnectionStateChanged) ## Because the model needs to be created in the same thread as the QMLEngine, we use a signal. - def addPrinter(self, name, address, properties): - printer = NetworkPrinterOutputDevice.NetworkPrinterOutputDevice(name, address, properties, self._api_prefix) + def addPrinter(self, name, address, properties, force_cluster=False): + cluster_size = int(properties.get(b"cluster_size", -1)) + if force_cluster or cluster_size >= 0: + printer = NetworkClusterPrinterOutputDevice.NetworkClusterPrinterOutputDevice( + name, address, properties, self._api_prefix, self._plugin_path) + else: + printer = NetworkPrinterOutputDevice.NetworkPrinterOutputDevice(name, address, properties, self._api_prefix) self._printers[printer.getKey()] = printer global_container_stack = Application.getInstance().getGlobalContainerStack() if global_container_stack and printer.getKey() == global_container_stack.getMetaDataEntry("um_network_key"): @@ -237,4 +283,22 @@ class NetworkPrinterOutputDevicePlugin(OutputDevicePlugin): elif state_change == ServiceStateChange.Removed: Logger.log("d", "Bonjour service removed: %s" % name) - self.removePrinterSignal.emit(str(name)) \ No newline at end of file + self.removePrinterSignal.emit(str(name)) + + ## For cluster below + def _get_plugin_directory_name(self): + current_file_absolute_path = os.path.realpath(__file__) + directory_path = os.path.dirname(current_file_absolute_path) + _, directory_name = os.path.split(directory_path) + return directory_name + + @property + def _plugin_path(self): + return PluginRegistry.getInstance().getPluginPath(self._get_plugin_directory_name()) + + @pyqtSlot() + def openControlPanel(self): + Logger.log("d", "Opening print jobs web UI...") + selected_device = self.getOutputDeviceManager().getActiveDevice() + if isinstance(selected_device, NetworkClusterPrinterOutputDevice.NetworkClusterPrinterOutputDevice): + QDesktopServices.openUrl(QUrl(selected_device.getPrintJobsUrl())) diff --git a/plugins/UM3NetworkPrinting/OpenPanelButton.qml b/plugins/UM3NetworkPrinting/OpenPanelButton.qml new file mode 100644 index 0000000000..3915c1f9eb --- /dev/null +++ b/plugins/UM3NetworkPrinting/OpenPanelButton.qml @@ -0,0 +1,18 @@ +import QtQuick 2.2 +import QtQuick.Controls 1.1 +import QtQuick.Controls.Styles 1.1 + +import UM 1.1 as UM + +Button { + objectName: "openPanelSaveAreaButton" + id: openPanelSaveAreaButton + + UM.I18nCatalog { id: catalog; name: "cura"; } + + height: UM.Theme.getSize("save_button_save_to_button").height + tooltip: catalog.i18nc("@info:tooltip", "Opens the print jobs page with your default web browser.") + text: catalog.i18nc("@action:button", "View print jobs") + + style: UM.Theme.styles.sidebar_action_button +} diff --git a/plugins/UM3NetworkPrinting/PrintCoreConfiguration.qml b/plugins/UM3NetworkPrinting/PrintCoreConfiguration.qml new file mode 100644 index 0000000000..624c02f735 --- /dev/null +++ b/plugins/UM3NetworkPrinting/PrintCoreConfiguration.qml @@ -0,0 +1,33 @@ +import QtQuick 2.2 +import QtQuick.Controls 1.4 +import QtQuick.Controls.Styles 1.4 + +import UM 1.2 as UM + + +Item +{ + id: extruderInfo + property var printCoreConfiguration + + width: parent.width / 2 + height: childrenRect.height + Label + { + id: materialLabel + text: printCoreConfiguration.material.material + " (" + printCoreConfiguration.material.color + ")" + elide: Text.ElideRight + width: parent.width + font: UM.Theme.getFont("very_small") + } + Label + { + id: printCoreLabel + text: printCoreConfiguration.print_core_id + anchors.top: materialLabel.bottom + elide: Text.ElideRight + width: parent.width + font: UM.Theme.getFont("very_small") + opacity: 0.5 + } +} diff --git a/plugins/UM3NetworkPrinting/PrintWindow.qml b/plugins/UM3NetworkPrinting/PrintWindow.qml new file mode 100644 index 0000000000..940993556f --- /dev/null +++ b/plugins/UM3NetworkPrinting/PrintWindow.qml @@ -0,0 +1,103 @@ +// Copyright (c) 2015 Ultimaker B.V. +// Cura is released under the terms of the LGPLv3 or higher. + +import QtQuick 2.2 +import QtQuick.Window 2.2 +import QtQuick.Controls 1.2 + +import UM 1.1 as UM + +UM.Dialog +{ + id: base; + + minimumWidth: 500 + minimumHeight: 140 + maximumWidth: minimumWidth + maximumHeight: minimumHeight + width: minimumWidth + height: minimumHeight + + visible: true + modality: Qt.ApplicationModal + + title: catalog.i18nc("@title:window","Print over network") + + Column + { + id: printerSelection + anchors.fill: parent + anchors.top: parent.top + anchors.topMargin: UM.Theme.getSize("default_margin").height + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.rightMargin: UM.Theme.getSize("default_margin").width + height: 50 + + Label + { + id: manualPrinterSelectionLabel + anchors + { + left: parent.left + topMargin: UM.Theme.getSize("default_margin").height + right: parent.right + } + text: "Printer selection" + wrapMode: Text.Wrap + height: 20 + } + + ComboBox + { + id: printerSelectionCombobox + model: OutputDevice.printers + textRole: "friendly_name" + + width: parent.width + height: 40 + Behavior on height { NumberAnimation { duration: 100 } } + + onActivated: + { + var printerData = OutputDevice.printers[index]; + OutputDevice.selectPrinter(printerData.unique_name, printerData.friendly_name); + } + } + + SystemPalette + { + id: palette + } + + UM.I18nCatalog { id: catalog; name: "cura"; } + } + + leftButtons: [ + Button + { + text: catalog.i18nc("@action:button","Cancel") + enabled: true + onClicked: { + base.visible = false; + // reset to defaults + OutputDevice.selectAutomaticPrinter() + printerSelectionCombobox.currentIndex = 0 + } + } + ] + + rightButtons: [ + Button + { + text: catalog.i18nc("@action:button","Print") + enabled: true + onClicked: { + base.visible = false; + OutputDevice.sendPrintJob(); + // reset to defaults + OutputDevice.selectAutomaticPrinter() + printerSelectionCombobox.currentIndex = 0 + } + } + ] +} diff --git a/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml b/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml new file mode 100644 index 0000000000..bab7db41d4 --- /dev/null +++ b/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml @@ -0,0 +1,345 @@ +import QtQuick 2.2 +import QtQuick.Controls 1.4 +import QtQuick.Controls.Styles 1.4 + +import UM 1.3 as UM + + +Rectangle +{ + function strPadLeft(string, pad, length) + { + return (new Array(length + 1).join(pad) + string).slice(-length); + } + + function getPrettyTime(time) + { + var hours = Math.floor(time / 3600) + time -= hours * 3600 + var minutes = Math.floor(time / 60); + time -= minutes * 60 + var seconds = Math.floor(time); + + var finalTime = strPadLeft(hours, "0", 2) + ':' + strPadLeft(minutes,'0',2)+ ':' + strPadLeft(seconds,'0',2); + return finalTime; + } + + function formatPrintJobPercent(printJob) + { + if (printJob == null) + { + return ""; + } + if (printJob.time_total === 0) + { + return ""; + } + return Math.min(100, Math.round(printJob.time_elapsed / printJob.time_total * 100)) + "%"; + } + + + id: printerDelegate + property var printer + + border.width: UM.Theme.getSize("default_lining").width + border.color: mouse.containsMouse ? UM.Theme.getColor("setting_control_border_highlight") : lineColor + z: mouse.containsMouse ? 1 : 0 // Push this item up a bit on mouse over to ensure that the highlighted bottom border is visible. + + property var printJob: + { + if (printer.reserved_by != null) + { + // Look in another list. + return OutputDevice.printJobsByUUID[printer.reserved_by] + } + return OutputDevice.printJobsByPrinterUUID[printer.uuid] + } + + MouseArea + { + id: mouse + anchors.fill:parent + onClicked: OutputDevice.selectPrinter(printer.unique_name, printer.friendly_name) + hoverEnabled: true; + + // Only clickable if no printer is selected + enabled: OutputDevice.selectedPrinterName == "" + } + + Row + { + anchors.left: parent.left + anchors.right: parent.right + anchors.top: parent.top + anchors.bottom: parent.bottom + anchors.margins: UM.Theme.getSize("default_margin").width + + Rectangle + { + width: parent.width / 3 + height: parent.height + + Label // Print job name + { + id: jobNameLabel + anchors.top: parent.top + anchors.left: parent.left + text: printJob != null ? printJob.name : "" + font: UM.Theme.getFont("default_bold") + } + + Label + { + id: jobOwnerLabel + anchors.top: jobNameLabel.bottom + text: printJob != null ? printJob.owner : "" + opacity: 0.50 + } + + Label + { + id: totalTimeLabel + anchors.bottom: parent.bottom + text: printJob != null ? getPrettyTime(printJob.time_total) : "" + opacity: 0.65 + font: UM.Theme.getFont("default") + } + } + + Rectangle + { + width: parent.width / 3 * 2 + height: parent.height + + Label // Friendly machine name + { + id: printerNameLabel + anchors.top: parent.top + anchors.left: parent.left + width: parent.width / 2 - UM.Theme.getSize("default_margin").width - showCameraIcon.width + text: printer.friendly_name + font: UM.Theme.getFont("default_bold") + elide: Text.ElideRight + } + + Label // Machine variant + { + id: printerTypeLabel + anchors.top: printerNameLabel.bottom + width: parent.width / 2 - UM.Theme.getSize("default_margin").width + text: printer.machine_variant + anchors.left: parent.left + elide: Text.ElideRight + font: UM.Theme.getFont("very_small") + opacity: 0.50 + } + + Rectangle // Camera icon + { + id: showCameraIcon + width: 40 + height: width + radius: width + anchors.right: printProgressArea.left + anchors.rightMargin: UM.Theme.getSize("default_margin").width + color: emphasisColor + UM.RecolorImage + { + anchors.verticalCenter: parent.verticalCenter + anchors.horizontalCenter: parent.horizontalCenter + source: "camera-icon.svg" + width: sourceSize.width + height: sourceSize.height * width / sourceSize.width + color: "white" + } + } + + Row // PrintCode config + { + id: extruderInfo + anchors.bottom: parent.bottom + + width: parent.width / 2 - UM.Theme.getSize("default_margin").width + height: childrenRect.height + spacing: 10 + + PrintCoreConfiguration + { + id: leftExtruderInfo + width: (parent.width-1) / 2 + printCoreConfiguration: printer.configuration[0] + } + + Rectangle + { + id: extruderSeperator + width: 1 + height: parent.height + color: lineColor + } + + PrintCoreConfiguration + { + id: rightExtruderInfo + width: (parent.width-1) / 2 + printCoreConfiguration: printer.configuration[1] + } + } + + Rectangle // Print progress + { + id: printProgressArea + anchors.right: parent.right + anchors.top: parent.top + height: showExtended ? parent.height: printProgressTitleBar.height + width: parent.width / 2 - UM.Theme.getSize("default_margin").width + border.width: UM.Theme.getSize("default_lining").width + border.color: lineColor + radius: cornerRadius + property var showExtended: { + if(printJob!= null) + { + var extendStates = ["sent_to_printer", "wait_for_configuration", "printing", "pre_print", "post_print", "wait_cleanup"]; + return extendStates.indexOf(printJob.status) !== -1; + } + return false + } + visible: + { + return true + } + + Item // Status and Percent + { + id: printProgressTitleBar + width: parent.width + //border.width: UM.Theme.getSize("default_lining").width + //border.color: lineColor + height: 40 + anchors.left: parent.left + + Label + { + id: statusText + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.verticalCenter: parent.verticalCenter + anchors.right: progressText.left + anchors.rightMargin: UM.Theme.getSize("default_margin").width + text: { + if(printJob != null) + { + if(printJob.status == "printing" || printJob.status == "post_print") + { + return catalog.i18nc("@label:status", "Printing") + } + else if(printJob.status == "wait_for_configuration") + { + return catalog.i18nc("@label:status", "Reserved") + } + else if(printJob.status == "wait_cleanup") + { + return catalog.i18nc("@label:status", "Finished") + } + else if (printJob.status == "pre_print" || printJob.status == "sent_to_printer") + { + return catalog.i18nc("@label:status", "Preparing") + } + else + { + return "" + } + } + return catalog.i18nc("@label:status", "Available") + } + + elide: Text.ElideRight + + font: UM.Theme.getFont("small") + } + Label + { + id: progressText + anchors.right: parent.right + anchors.rightMargin: UM.Theme.getSize("default_margin").width + + anchors.top: statusText.top + + text: formatPrintJobPercent(printJob) + visible: printJob != null && (["printing", "post_print", "pre_print", "sent_to_printer"].indexOf(printJob.status) !== -1) + opacity: 0.65 + font: UM.Theme.getFont("very_small") + } + Rectangle + { + //TODO: This will become a progress bar in the future + width: parent.width + height: UM.Theme.getSize("default_lining").height + anchors.bottom: parent.bottom + anchors.left: parent.left + visible: printProgressArea.showExtended + color: lineColor + } + } + + Column + { + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_margin").width + + anchors.top: printProgressTitleBar.bottom + anchors.topMargin: UM.Theme.getSize("default_margin").height + + width: parent.width - 2 * UM.Theme.getSize("default_margin").width + + visible: printJob != null && (["wait_cleanup", "printing", "pre_print", "wait_for_configuration"].indexOf(printJob.status) !== -1) + + Label // Status detail + { + text: + { + if(printJob != null) + { + if(printJob.status == "printing" ) + { + return catalog.i18nc("@label", "Finishes at: ") + OutputDevice.getTimeCompleted(printJob.time_total - printJob.time_elapsed) + } + if(printJob.status == "wait_cleanup") + { + return catalog.i18nc("@label", "Clear build plate") + } + if(printJob.status == "sent_to_printer" || printJob.status == "pre_print") + { + return catalog.i18nc("@label", "Preparing to print") + } + if(printJob.status == "wait_for_configuration") + { + return catalog.i18nc("@label", "Not accepting print jobs") + } + } + return "" + } + elide: Text.ElideRight + font: UM.Theme.getFont("default") + } + + Label // Status 2nd row + { + text: { + if(printJob != null) { + if(printJob.status == "printing" ) + { + return OutputDevice.getDateCompleted(printJob.time_total - printJob.time_elapsed) + } + } + return ""; + } + + elide: Text.ElideRight + font: UM.Theme.getFont("default") + } + } + } + } + } +} diff --git a/plugins/UM3NetworkPrinting/PrinterTile.qml b/plugins/UM3NetworkPrinting/PrinterTile.qml new file mode 100644 index 0000000000..f240f3034f --- /dev/null +++ b/plugins/UM3NetworkPrinting/PrinterTile.qml @@ -0,0 +1,54 @@ +import QtQuick 2.2 +import QtQuick.Controls 1.4 +import QtQuick.Controls.Styles 1.4 + +import UM 1.3 as UM +import Cura 1.0 as Cura + +Rectangle +{ + id: base + width: 250 + height: 250 + signal clicked() + MouseArea + { + anchors.fill:parent + onClicked: base.clicked() + } + Rectangle + { + // TODO: Actually add UM icon / picture + width: 100 + height: 100 + border.width: UM.Theme.getSize("default_lining").width + anchors.horizontalCenter: parent.horizontalCenter + anchors.top: parent.top + anchors.topMargin: UM.Theme.getSize("default_margin").height + } + Label + { + id: nameLabel + anchors.bottom: ipLabel.top + anchors.bottomMargin: UM.Theme.getSize("default_margin").height + anchors.left: parent.left + anchors.right: parent.right + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.rightMargin: UM.Theme.getSize("default_margin").width + text: modelData.friendly_name.toString() + font: UM.Theme.getFont("large") + elide: Text.ElideMiddle; + height: UM.Theme.getSize("section").height; + } + Label + { + id: ipLabel + text: modelData.ip_address.toString() + anchors.bottom: parent.bottom + anchors.bottomMargin: UM.Theme.getSize("default_margin").height + font: UM.Theme.getFont("default") + height:10 + anchors.horizontalCenter: parent.horizontalCenter + } +} + diff --git a/plugins/UM3NetworkPrinting/PrinterVideoStream.qml b/plugins/UM3NetworkPrinting/PrinterVideoStream.qml new file mode 100644 index 0000000000..4f138ee8d1 --- /dev/null +++ b/plugins/UM3NetworkPrinting/PrinterVideoStream.qml @@ -0,0 +1,91 @@ +import QtQuick 2.2 +import QtQuick.Controls 1.4 +import QtQuick.Controls.Styles 1.4 + +import UM 1.3 as UM + + +Item +{ + Rectangle + { + anchors.fill:parent + color: UM.Theme.getColor("viewport_overlay") + opacity: 0.5 + } + + MouseArea + { + anchors.fill: parent + onClicked: OutputDevice.selectAutomaticPrinter() + z: 0 + } + + Button + { + id: backButton + anchors.bottom: cameraImage.top + anchors.bottomMargin: UM.Theme.getSize("default_margin").width + anchors.right: cameraImage.right + + // TODO: Harcoded sizes + width: 20 + height: 20 + + onClicked: OutputDevice.selectAutomaticPrinter() + + style: ButtonStyle + { + label: Item + { + UM.RecolorImage + { + anchors.verticalCenter: parent.verticalCenter + anchors.horizontalCenter: parent.horizontalCenter + width: control.width + height: control.height + sourceSize.width: width + sourceSize.height: width + source: UM.Theme.getIcon("cross1") + } + } + background: Item {} + } + } + + Image + { + id: cameraImage + width: Math.min(sourceSize.width === 0 ? 800 : sourceSize.width, maximumWidth) + height: (sourceSize.height === 0 ? 600 : sourceSize.height) * width / sourceSize.width + anchors.horizontalCenter: parent.horizontalCenter + anchors.verticalCenter: parent.verticalCenter + z: 1 + onVisibleChanged: + { + if(visible) + { + OutputDevice.startCamera() + } else + { + OutputDevice.stopCamera() + } + } + source: + { + if(OutputDevice.cameraImage) + { + return OutputDevice.cameraImage; + } + return ""; + } + } + + MouseArea + { + anchors.fill: cameraImage + onClicked: { /* no-op */ } + z: 1 + } + +} diff --git a/plugins/UM3NetworkPrinting/__init__.py b/plugins/UM3NetworkPrinting/__init__.py index 667733649b..37f863bd00 100644 --- a/plugins/UM3NetworkPrinting/__init__.py +++ b/plugins/UM3NetworkPrinting/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import NetworkPrinterOutputDevicePlugin from . import DiscoverUM3Action from UM.i18n import i18nCatalog diff --git a/plugins/UM3NetworkPrinting/camera-icon.svg b/plugins/UM3NetworkPrinting/camera-icon.svg new file mode 100644 index 0000000000..2aafc4b6f4 --- /dev/null +++ b/plugins/UM3NetworkPrinting/camera-icon.svg @@ -0,0 +1,3 @@ + + + diff --git a/plugins/USBPrinting/FirmwareUpdateWindow.qml b/plugins/USBPrinting/FirmwareUpdateWindow.qml index 0e23348d60..44218b61b1 100644 --- a/plugins/USBPrinting/FirmwareUpdateWindow.qml +++ b/plugins/USBPrinting/FirmwareUpdateWindow.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Window 2.2 diff --git a/plugins/USBPrinting/USBPrinterOutputDevice.py b/plugins/USBPrinting/USBPrinterOutputDevice.py index 4d3b8446a3..06efd4d55b 100644 --- a/plugins/USBPrinting/USBPrinterOutputDevice.py +++ b/plugins/USBPrinting/USBPrinterOutputDevice.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from .avr_isp import stk500v2, ispBase, intelHex import serial # type: ignore diff --git a/plugins/USBPrinting/USBPrinterOutputDeviceManager.py b/plugins/USBPrinting/USBPrinterOutputDeviceManager.py index 430ec1d844..fe9095a08b 100644 --- a/plugins/USBPrinting/USBPrinterOutputDeviceManager.py +++ b/plugins/USBPrinting/USBPrinterOutputDeviceManager.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from UM.Signal import Signal, signalemitter from . import USBPrinterOutputDevice diff --git a/plugins/USBPrinting/__init__.py b/plugins/USBPrinting/__init__.py index 990a59fdf3..1cc45c3c3b 100644 --- a/plugins/USBPrinting/__init__.py +++ b/plugins/USBPrinting/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import USBPrinterOutputDeviceManager from PyQt5.QtQml import qmlRegisterType, qmlRegisterSingletonType diff --git a/plugins/UltimakerMachineActions/BedLevelMachineAction.qml b/plugins/UltimakerMachineActions/BedLevelMachineAction.qml index 6c34212cf9..262d5df376 100644 --- a/plugins/UltimakerMachineActions/BedLevelMachineAction.qml +++ b/plugins/UltimakerMachineActions/BedLevelMachineAction.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/plugins/UltimakerMachineActions/UM2UpgradeSelection.py b/plugins/UltimakerMachineActions/UM2UpgradeSelection.py index 6c972efbf0..c84033a98e 100644 --- a/plugins/UltimakerMachineActions/UM2UpgradeSelection.py +++ b/plugins/UltimakerMachineActions/UM2UpgradeSelection.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from UM.Settings.ContainerRegistry import ContainerRegistry from UM.Settings.InstanceContainer import InstanceContainer diff --git a/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml b/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml index 5e0096c6b0..988c9d6128 100644 --- a/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml +++ b/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/plugins/UltimakerMachineActions/UMOUpgradeSelection.py b/plugins/UltimakerMachineActions/UMOUpgradeSelection.py index bcef734f61..f6275e5b56 100644 --- a/plugins/UltimakerMachineActions/UMOUpgradeSelection.py +++ b/plugins/UltimakerMachineActions/UMOUpgradeSelection.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Uranium is released under the terms of the AGPLv3 or higher. +# Uranium is released under the terms of the LGPLv3 or higher. from UM.Settings.ContainerRegistry import ContainerRegistry from cura.MachineAction import MachineAction diff --git a/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml b/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml index abb7588a39..2b973ca1bb 100644 --- a/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml +++ b/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/plugins/UltimakerMachineActions/UpgradeFirmwareMachineAction.qml b/plugins/UltimakerMachineActions/UpgradeFirmwareMachineAction.qml index 153d8254ef..72a77e992d 100644 --- a/plugins/UltimakerMachineActions/UpgradeFirmwareMachineAction.qml +++ b/plugins/UltimakerMachineActions/UpgradeFirmwareMachineAction.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/plugins/UltimakerMachineActions/__init__.py b/plugins/UltimakerMachineActions/__init__.py index 33b85387a4..864c501392 100644 --- a/plugins/UltimakerMachineActions/__init__.py +++ b/plugins/UltimakerMachineActions/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import BedLevelMachineAction from . import UpgradeFirmwareMachineAction diff --git a/plugins/VersionUpgrade/VersionUpgrade21to22/MachineInstance.py b/plugins/VersionUpgrade/VersionUpgrade21to22/MachineInstance.py index faf9105cff..4a75b23c2f 100644 --- a/plugins/VersionUpgrade/VersionUpgrade21to22/MachineInstance.py +++ b/plugins/VersionUpgrade/VersionUpgrade21to22/MachineInstance.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import UM.VersionUpgrade #To indicate that a file is of incorrect format. import UM.VersionUpgradeManager #To schedule more files to be upgraded. diff --git a/plugins/VersionUpgrade/VersionUpgrade21to22/Preferences.py b/plugins/VersionUpgrade/VersionUpgrade21to22/Preferences.py index 13c98395f2..842499da86 100644 --- a/plugins/VersionUpgrade/VersionUpgrade21to22/Preferences.py +++ b/plugins/VersionUpgrade/VersionUpgrade21to22/Preferences.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser #To read config files. import io #To output config files to string. diff --git a/plugins/VersionUpgrade/VersionUpgrade21to22/Profile.py b/plugins/VersionUpgrade/VersionUpgrade21to22/Profile.py index 7cc404de6b..4316d5cafb 100644 --- a/plugins/VersionUpgrade/VersionUpgrade21to22/Profile.py +++ b/plugins/VersionUpgrade/VersionUpgrade21to22/Profile.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser #To read config files. import io #To write config files to strings as if they were files. diff --git a/plugins/VersionUpgrade/VersionUpgrade21to22/VersionUpgrade21to22.py b/plugins/VersionUpgrade/VersionUpgrade21to22/VersionUpgrade21to22.py index 055d28b3ab..d8036491bf 100644 --- a/plugins/VersionUpgrade/VersionUpgrade21to22/VersionUpgrade21to22.py +++ b/plugins/VersionUpgrade/VersionUpgrade21to22/VersionUpgrade21to22.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser #To get version numbers from config files. diff --git a/plugins/VersionUpgrade/VersionUpgrade21to22/__init__.py b/plugins/VersionUpgrade/VersionUpgrade21to22/__init__.py index b153bcf3ce..435621ec54 100644 --- a/plugins/VersionUpgrade/VersionUpgrade21to22/__init__.py +++ b/plugins/VersionUpgrade/VersionUpgrade21to22/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import VersionUpgrade21to22 diff --git a/plugins/VersionUpgrade/VersionUpgrade22to24/VersionUpgrade.py b/plugins/VersionUpgrade/VersionUpgrade22to24/VersionUpgrade.py index 9d508e553b..19f0563f10 100644 --- a/plugins/VersionUpgrade/VersionUpgrade22to24/VersionUpgrade.py +++ b/plugins/VersionUpgrade/VersionUpgrade22to24/VersionUpgrade.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser #To get version numbers from config files. import os diff --git a/plugins/VersionUpgrade/VersionUpgrade22to24/__init__.py b/plugins/VersionUpgrade/VersionUpgrade22to24/__init__.py index d7ac4ef452..fbdbf92a4b 100644 --- a/plugins/VersionUpgrade/VersionUpgrade22to24/__init__.py +++ b/plugins/VersionUpgrade/VersionUpgrade22to24/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import VersionUpgrade diff --git a/plugins/VersionUpgrade/VersionUpgrade25to26/VersionUpgrade25to26.py b/plugins/VersionUpgrade/VersionUpgrade25to26/VersionUpgrade25to26.py index 5b3632a095..2c598ad766 100644 --- a/plugins/VersionUpgrade/VersionUpgrade25to26/VersionUpgrade25to26.py +++ b/plugins/VersionUpgrade/VersionUpgrade25to26/VersionUpgrade25to26.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser #To parse the files we need to upgrade and write the new files. import io #To serialise configparser output to a string. diff --git a/plugins/VersionUpgrade/VersionUpgrade25to26/__init__.py b/plugins/VersionUpgrade/VersionUpgrade25to26/__init__.py index 451b5f325d..3014eca4a2 100644 --- a/plugins/VersionUpgrade/VersionUpgrade25to26/__init__.py +++ b/plugins/VersionUpgrade/VersionUpgrade25to26/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import VersionUpgrade25to26 diff --git a/plugins/VersionUpgrade/VersionUpgrade25to26/tests/TestVersionUpgrade25to26.py b/plugins/VersionUpgrade/VersionUpgrade25to26/tests/TestVersionUpgrade25to26.py index 78cd8a03c5..9d7c7646cc 100644 --- a/plugins/VersionUpgrade/VersionUpgrade25to26/tests/TestVersionUpgrade25to26.py +++ b/plugins/VersionUpgrade/VersionUpgrade25to26/tests/TestVersionUpgrade25to26.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser #To check whether the appropriate exceptions are raised. import pytest #To register tests with. diff --git a/plugins/VersionUpgrade/VersionUpgrade26to27/VersionUpgrade26to27.py b/plugins/VersionUpgrade/VersionUpgrade26to27/VersionUpgrade26to27.py index 4df64af95b..a2d78d8d9f 100644 --- a/plugins/VersionUpgrade/VersionUpgrade26to27/VersionUpgrade26to27.py +++ b/plugins/VersionUpgrade/VersionUpgrade26to27/VersionUpgrade26to27.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser #To parse the files we need to upgrade and write the new files. import io #To serialise configparser output to a string. diff --git a/plugins/VersionUpgrade/VersionUpgrade26to27/__init__.py b/plugins/VersionUpgrade/VersionUpgrade26to27/__init__.py index 27de4ad8c1..699faacab6 100644 --- a/plugins/VersionUpgrade/VersionUpgrade26to27/__init__.py +++ b/plugins/VersionUpgrade/VersionUpgrade26to27/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import VersionUpgrade26to27 diff --git a/plugins/VersionUpgrade/VersionUpgrade26to27/tests/TestVersionUpgrade26to27.py b/plugins/VersionUpgrade/VersionUpgrade26to27/tests/TestVersionUpgrade26to27.py index f8e3561b38..eebaca23c6 100644 --- a/plugins/VersionUpgrade/VersionUpgrade26to27/tests/TestVersionUpgrade26to27.py +++ b/plugins/VersionUpgrade/VersionUpgrade26to27/tests/TestVersionUpgrade26to27.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser #To check whether the appropriate exceptions are raised. import pytest #To register tests with. diff --git a/plugins/VersionUpgrade/VersionUpgrade27to30/VersionUpgrade27to30.py b/plugins/VersionUpgrade/VersionUpgrade27to30/VersionUpgrade27to30.py index 853be63966..c8fbcf207e 100644 --- a/plugins/VersionUpgrade/VersionUpgrade27to30/VersionUpgrade27to30.py +++ b/plugins/VersionUpgrade/VersionUpgrade27to30/VersionUpgrade27to30.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser #To parse preference files. import io #To serialise the preference files afterwards. diff --git a/plugins/VersionUpgrade/VersionUpgrade27to30/__init__.py b/plugins/VersionUpgrade/VersionUpgrade27to30/__init__.py index ece6cb83f2..2247efd1c9 100644 --- a/plugins/VersionUpgrade/VersionUpgrade27to30/__init__.py +++ b/plugins/VersionUpgrade/VersionUpgrade27to30/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import VersionUpgrade27to30 diff --git a/plugins/VersionUpgrade/VersionUpgrade27to30/tests/TestVersionUpgrade27to30.py b/plugins/VersionUpgrade/VersionUpgrade27to30/tests/TestVersionUpgrade27to30.py index 86127df24f..cae08ebcfd 100644 --- a/plugins/VersionUpgrade/VersionUpgrade27to30/tests/TestVersionUpgrade27to30.py +++ b/plugins/VersionUpgrade/VersionUpgrade27to30/tests/TestVersionUpgrade27to30.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import configparser #To parse the resulting config files. import pytest #To register tests with. diff --git a/plugins/X3DReader/X3DReader.py b/plugins/X3DReader/X3DReader.py index f78023dfab..e4a59dcdaa 100644 --- a/plugins/X3DReader/X3DReader.py +++ b/plugins/X3DReader/X3DReader.py @@ -1,5 +1,5 @@ # Contributed by Seva Alekseyev with National Institutes of Health, 2016 -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from math import pi, sin, cos, sqrt diff --git a/plugins/XRayView/XRayPass.py b/plugins/XRayView/XRayPass.py index 6700ee51a5..38c88a256e 100644 --- a/plugins/XRayView/XRayPass.py +++ b/plugins/XRayView/XRayPass.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import os.path diff --git a/plugins/XRayView/XRayView.py b/plugins/XRayView/XRayView.py index 931ecb1975..ed8d14b8b4 100644 --- a/plugins/XRayView/XRayView.py +++ b/plugins/XRayView/XRayView.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import os.path diff --git a/plugins/XRayView/__init__.py b/plugins/XRayView/__init__.py index 14ab84ea4b..f56351ec48 100644 --- a/plugins/XRayView/__init__.py +++ b/plugins/XRayView/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import XRayView diff --git a/plugins/XmlMaterialProfile/XmlMaterialProfile.py b/plugins/XmlMaterialProfile/XmlMaterialProfile.py index a9acf9bec9..12fa1c9ef4 100644 --- a/plugins/XmlMaterialProfile/XmlMaterialProfile.py +++ b/plugins/XmlMaterialProfile/XmlMaterialProfile.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import copy import io diff --git a/plugins/XmlMaterialProfile/XmlMaterialUpgrader.py b/plugins/XmlMaterialProfile/XmlMaterialUpgrader.py index c93c476c2e..c882239dba 100644 --- a/plugins/XmlMaterialProfile/XmlMaterialUpgrader.py +++ b/plugins/XmlMaterialProfile/XmlMaterialUpgrader.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import xml.etree.ElementTree as ET diff --git a/plugins/XmlMaterialProfile/__init__.py b/plugins/XmlMaterialProfile/__init__.py index 69c64193b7..8173e9dd04 100644 --- a/plugins/XmlMaterialProfile/__init__.py +++ b/plugins/XmlMaterialProfile/__init__.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from . import XmlMaterialProfile from . import XmlMaterialUpgrader diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index fba6678bff..06bc04b1fe 100755 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -4094,7 +4094,7 @@ "raft_smoothing": { "label": "Raft Smoothing", - "description": "This setting control how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle.", + "description": "This setting controls how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle.", "unit": "mm", "type": "float", "default_value": 5, diff --git a/resources/i18n/de_DE/cura.po b/resources/i18n/de_DE/cura.po index e9ca7712aa..72e04b2b61 100644 --- a/resources/i18n/de_DE/cura.po +++ b/resources/i18n/de_DE/cura.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:30+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: German\n" "Language: de_DE\n" @@ -24,7 +24,7 @@ msgstr "Geräteeinstellungen" #: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" -msgstr "" +msgstr "Röntgen-Ansicht" #: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" @@ -39,17 +39,17 @@ msgstr "G-Code-Datei" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:65 msgctxt "@action:button" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Mit Doodle3D WLAN-Box drucken" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:66 msgctxt "@properties:tooltip" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Mit Doodle3D WLAN-Box drucken" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:86 msgctxt "@info:status" msgid "Connecting to Doodle3D Connect" -msgstr "" +msgstr "Zu Doodle3D Connect verbinden" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:87 #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:155 @@ -73,32 +73,32 @@ msgstr "Abbrechen" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:154 msgctxt "@info:status" msgid "Sending data to Doodle3D Connect" -msgstr "" +msgstr "Daten werden zu Doodle3D Connect gesendet" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:161 msgctxt "@info:status" msgid "Unable to send data to Doodle3D Connect. Is another job still active?" -msgstr "" +msgstr "Daten können nicht zu Doodle3D Connect gesendet werden. Ist noch ein weiterer Auftrag in Bearbeitung?" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:175 msgctxt "@info:status" msgid "Storing data on Doodle3D Connect" -msgstr "" +msgstr "Daten werden auf Doodle3D Connect gespeichert" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:213 msgctxt "@info:status" msgid "File sent to Doodle3D Connect" -msgstr "" +msgstr "Datei wurde zu Doodle3D Connect gesendet" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@action:button" msgid "Open Connect.." -msgstr "" +msgstr "Connect wird geöffnet ..." #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@info:tooltip" msgid "Open the Doodle3D Connect web interface" -msgstr "" +msgstr "Doodle3D Connect Web-Schnittstelle öffnen" #: /home/ruben/Projects/Cura/plugins/ChangeLogPlugin/ChangeLog.py:35 msgctxt "@item:inmenu" @@ -143,7 +143,7 @@ msgstr "Es kann kein neuer Auftrag gestartet werden, da der Drucker beschäftigt #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:153 msgctxt "@info:title" msgid "Print Details" -msgstr "" +msgstr "Druckdetails" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:status" @@ -153,7 +153,7 @@ msgstr "Der Drucker unterstützt keinen USB-Druck, da er die UltiGCode-Variante #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:title" msgid "USB Printing" -msgstr "" +msgstr "USB-Drucken" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:460 msgctxt "@info:status" @@ -168,7 +168,7 @@ msgstr "Es kann kein neuer Auftrag gestartet werden, da der Drucker keinen Druck #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1296 msgctxt "@info:title" msgid "Warning" -msgstr "" +msgstr "Warnhinweis" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:108 msgctxt "@info" @@ -184,7 +184,7 @@ msgstr "Die für den Drucker unter %s erforderliche Firmware wurde nicht gefunde #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:122 msgctxt "@info:title" msgid "Printer Firmware" -msgstr "" +msgstr "Drucker-Firmware" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." @@ -201,25 +201,25 @@ msgstr "Auf Wechseldatenträger speichern {0}" #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" -msgstr "" +msgstr "Wird auf Wechseldatenträger gespeichert {0}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:89 msgctxt "@info:title" msgid "Saving" -msgstr "" +msgstr "Wird gespeichert" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:99 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:102 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" -msgstr "" +msgstr "Konnte nicht als {0} gespeichert werden: {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:118 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." -msgstr "" +msgstr "Bei dem Versuch, auf {device} zu schreiben, wurde ein Dateiname nicht gefunden." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:131 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146 @@ -236,7 +236,7 @@ msgstr "Konnte nicht auf dem Wechseldatenträger gespeichert werden {0}: {1}" #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1305 msgctxt "@info:title" msgid "Error" -msgstr "" +msgstr "Fehler" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 #, python-brace-format @@ -247,7 +247,7 @@ msgstr "Auf Wechseldatenträger {0} gespeichert als {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 msgctxt "@info:title" msgid "File Saved" -msgstr "" +msgstr "Datei wurde gespeichert" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 msgctxt "@action:button" @@ -269,7 +269,7 @@ msgstr "Ausgeworfen {0}. Sie können den Datenträger jetzt sicher entfernen." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:156 msgctxt "@info:title" msgid "Safely Remove Hardware" -msgstr "" +msgstr "Hardware sicher entfernen" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:158 #, python-brace-format @@ -304,7 +304,7 @@ msgstr "Zugriff auf Drucker erforderlich. Bestätigen Sie den Zugriff auf den Dr #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:157 msgctxt "@info:title" msgid "Connection status" -msgstr "" +msgstr "Verbindungsstatus" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:158 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:158 @@ -319,7 +319,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:500 msgctxt "@info:title" msgid "Connection Status" -msgstr "" +msgstr "Verbindungsstatus" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:159 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:159 @@ -417,7 +417,7 @@ msgstr "Es kann kein neuer Druckauftrag gestartet werden, da der Drucker beschä #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:650 msgctxt "@info:title" msgid "Printer Status" -msgstr "" +msgstr "Druckerstatus" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:674 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:660 @@ -488,7 +488,7 @@ msgstr "Daten werden zum Drucker gesendet" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:839 msgctxt "@info:title" msgid "Sending Data" -msgstr "" +msgstr "Daten werden gesendet" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:908 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:890 @@ -547,73 +547,73 @@ msgstr "Anschluss über Netzwerk" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:103 msgid "This printer is not set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Dieser Drucker ist nicht für das Hosten einer Gruppe verbundener Ultimaker 3-Drucker eingerichtet." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:104 #, python-brace-format msgctxt "Count is number of printers." msgid "This printer is the host for a group of {count} connected Ultimaker 3 printers." -msgstr "" +msgstr "Dieser Drucker ist der Host für eine Gruppe von {count} verbundenen Ultimaker 3-Druckern." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:105 #, python-brace-format msgid "{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate." -msgstr "" +msgstr "{printer_name} hat den Druck von '{job_name}‘ beendet. Bitte holen Sie den Druck ab und bestätigen Sie das Räumen des Druckbetts." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:106 #, python-brace-format msgid "{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing." -msgstr "" +msgstr "{printer_name} ist für das Drucken von '{job_name}‘ reserviert. Bitte ändern Sie die Druckerkonfiguration passend für den Auftrag, um mit dem Drucken zu beginnen." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:196 msgctxt "@info:status" msgid "Sending new jobs (temporarily) blocked, still sending the previous print job." -msgstr "" +msgstr "Das Senden neuer Aufträge ist (vorübergehend) blockiert; der vorherige Druckauftrag wird noch gesendet." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:212 msgctxt "@info:status" msgid "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Es kann kein neuer Druckauftrag gesendet werden: Dieser 3D-Drucker ist (noch) nicht für das Hosten einer Gruppe verbundener Ultimaker 3-Drucker eingerichtet." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:425 #, python-brace-format msgctxt "@info:progress" msgid "Sending {file_name} to group {cluster_name}" -msgstr "" +msgstr "{file_name} wird an Gruppe {cluster_name} gesendet" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:498 #, python-brace-format msgctxt "@info:status" msgid "Sent {file_name} to group {cluster_name}." -msgstr "" +msgstr "{file_name} wurde an Gruppe {cluster_name} gesendet." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:503 msgctxt "@action:button" msgid "Show print jobs" -msgstr "" +msgstr "Druckaufträge anzeigen" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:504 msgctxt "@info:tooltip" msgid "Opens the print jobs interface in your browser." -msgstr "" +msgstr "Öffnet die Schaltfläche für Druckaufträge in Ihrem Browser." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:520 #, python-brace-format msgctxt "@info:status" msgid "Unable to send print job to group {cluster_name}." -msgstr "" +msgstr "Es können keine Druckaufträge an die Gruppe {cluster_name} gesendet werden." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:71 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "To ensure that your {machine_name} is equipped with the latest features it is recommended to update the firmware regularly. This can be done on the {machine_name} (when connected to the network) or via USB." -msgstr "" +msgstr "Um sicherzustellen, dass Ihr {machine_name} mit den neuesten Funktionen ausgestattet ist, wird empfohlen, die Firmware regelmäßig zu aktualisieren Dies kann auf dem {machine_name} (bei Anschluss an ein Netzwerk) oder über USB erfolgen." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:72 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s firmware available" -msgstr "" +msgstr "Neue Firmware für %s verfügbar" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:73 #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:149 @@ -624,7 +624,7 @@ msgstr "Download" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:83 msgctxt "@info" msgid "Could not access update information." -msgstr "" +msgstr "Zugriff auf Update-Informationen nicht möglich." #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:199 msgctxt "@info:status" @@ -663,7 +663,7 @@ msgstr "Cura erfasst anonymisierte Slice-Informationen. Sie können dies in den #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:46 msgctxt "@info:title" msgid "Collecting Data" -msgstr "" +msgstr "Daten werden erfasst" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:48 msgctxt "@action:button" @@ -684,7 +684,7 @@ msgstr "G-Code-Datei" #: /home/ruben/Projects/Cura/plugins/LayerView/__init__.py:13 msgctxt "@item:inlistbox" msgid "Layer view" -msgstr "" +msgstr "Schichtenansicht" #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:93 msgctxt "@info:status" @@ -694,7 +694,7 @@ msgstr "Cura zeigt die Schichten nicht akkurat an, wenn Wire Printing aktiviert #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:94 msgctxt "@info:title" msgid "Layer View" -msgstr "" +msgstr "Schichtenansicht" #: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" @@ -724,7 +724,7 @@ msgstr "GIF-Bilddatei" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." -msgstr "" +msgstr "Slicing mit dem aktuellen Material nicht möglich, da es mit der gewählten Maschine oder Konfiguration nicht kompatibel ist." #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:297 @@ -732,7 +732,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:316 msgctxt "@info:title" msgid "Unable to slice" -msgstr "" +msgstr "Slicing nicht möglich" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:296 #, python-brace-format @@ -759,7 +759,7 @@ msgstr "Schichten werden verarbeitet" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:238 msgctxt "@info:title" msgid "Information" -msgstr "" +msgstr "Informationen" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" @@ -798,18 +798,18 @@ msgstr "Düse" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:28 msgctxt "@menuitem" msgid "Browse plugins" -msgstr "" +msgstr "Plugins durchsuchen" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:163 #, python-brace-format msgctxt "@info:status" msgid "Failed to get plugin ID from {0}" -msgstr "" +msgstr "Plugin-ID von {0} wurde nicht erhalten" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:164 msgctxt "@info:tile" msgid "Warning" -msgstr "" +msgstr "Warnhinweis" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:202 msgctxt "@window:title" @@ -819,7 +819,7 @@ msgstr "Plugin-Browser" #: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" -msgstr "" +msgstr "Solide Ansicht" #: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" @@ -835,7 +835,7 @@ msgstr "G-Code parsen" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:370 msgctxt "@info:title" msgid "G-code Details" -msgstr "" +msgstr "G-Code-Details" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:368 msgctxt "@info:generic" @@ -917,7 +917,7 @@ msgstr "Stützstruktur" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:95 msgctxt "@tooltip" msgid "Skirt" -msgstr "" +msgstr "Skirt" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:96 msgctxt "@tooltip" @@ -958,7 +958,7 @@ msgstr "Neue Position für Objekte finden" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:34 msgctxt "@info:title" msgid "Finding Location" -msgstr "" +msgstr "Position finden" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:89 #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 @@ -969,7 +969,7 @@ msgstr "Innerhalb der Druckabmessung für alle Objekte konnte keine Position gef #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:90 msgctxt "@info:title" msgid "Can't Find Location" -msgstr "" +msgstr "Kann Position nicht finden" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:431 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:112 @@ -982,7 +982,7 @@ msgstr "Datei bereits vorhanden" #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" -msgstr "" +msgstr "Die Datei {0} ist bereits vorhanden. Soll die Datei wirklich überschrieben werden?" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:815 msgctxt "@label" @@ -1003,7 +1003,7 @@ msgstr "Das gewählte Material ist mit der gewählten Maschine oder Konfiguratio #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:title" msgid "Incompatible Material" -msgstr "" +msgstr "Material nicht kompatibel" #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:status Has a cancel button next to it." @@ -1024,24 +1024,24 @@ msgstr "Änderung des Materialdurchmessers rückgängig machen" #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" -msgstr "" +msgstr "Export des Profils nach {0} fehlgeschlagen: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:150 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." -msgstr "" +msgstr "Export des Profils nach {0} fehlgeschlagen: Fehlermeldung von Writer-Plugin" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:155 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" -msgstr "" +msgstr "Profil wurde nach {0} exportiert" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 msgctxt "@info:title" msgid "Export Details" -msgstr "" +msgstr "Exportdetails" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:182 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:204 @@ -1050,7 +1050,7 @@ msgstr "" #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to import profile from {0}: {1}" -msgstr "" +msgstr "Import des Profils aus Datei {0} fehlgeschlagen: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:215 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:251 @@ -1089,7 +1089,7 @@ msgstr "Die Höhe der Druckabmessung wurde aufgrund des Wertes der Einstellung #: /home/ruben/Projects/Cura/cura/BuildVolume.py:102 msgctxt "@info:title" msgid "Build Volume" -msgstr "" +msgstr "Produktabmessungen" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:34 msgctxt "@info:status" @@ -1100,7 +1100,7 @@ msgstr "Objekte vervielfältigen und platzieren" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 msgctxt "@info:title" msgid "Placing Object" -msgstr "" +msgstr "Objekt-Platzierung" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:54 msgctxt "@title:window" @@ -1113,10 +1113,7 @@ msgid "" "

A fatal exception has occurred that we could not recover from!

\n" "

Please use the information below to post a bug report at http://github.com/Ultimaker/Cura/issues

\n" " " -msgstr "" -"

Ein schwerer Ausnahmezustand ist aufgetreten, den wir nicht beseitigen konnten!

\n" -"

Bitte senden Sie einen Fehlerbericht an folgende URL http://github.com/Ultimaker/Cura/issues

\n" -" " +msgstr "

Ein schwerer Ausnahmezustand ist aufgetreten, den wir nicht beseitigen konnten!

\n

Bitte senden Sie einen Fehlerbericht an folgende URL http://github.com/Ultimaker/Cura/issues

\n " #: /home/ruben/Projects/Cura/cura/CrashHandler.py:112 msgctxt "@action:button" @@ -1418,10 +1415,7 @@ msgid "" "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n" "\n" "Select your printer from the list below:" -msgstr "" -"Um über das Netzwerk direkt auf Ihrem Drucker zu drucken, stellen Sie bitte sicher, dass der Drucker mit dem Netzwerkkabel verbunden ist oder verbinden Sie Ihren Drucker mit Ihrem WLAN-Netzwerk. Wenn Sie Cura nicht mit Ihrem Drucker verbinden, können Sie dennoch ein USB-Laufwerk für die Übertragung von G-Code-Dateien auf Ihren Drucker verwenden.\n" -"\n" -"Wählen Sie Ihren Drucker aus der folgenden Liste:" +msgstr "Um über das Netzwerk direkt auf Ihrem Drucker zu drucken, stellen Sie bitte sicher, dass der Drucker mit dem Netzwerkkabel verbunden ist oder verbinden Sie Ihren Drucker mit Ihrem WLAN-Netzwerk. Wenn Sie Cura nicht mit Ihrem Drucker verbinden, können Sie dennoch ein USB-Laufwerk für die Übertragung von G-Code-Dateien auf Ihren Drucker verwenden.\n\nWählen Sie Ihren Drucker aus der folgenden Liste:" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:75 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:75 @@ -1547,17 +1541,17 @@ msgstr "Konfiguration aktivieren" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:284 msgctxt "@label" msgid "This printer is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "Dieser Drucker ist nicht für das Hosten einer Gruppe verbundener Ultimaker 3-Drucker eingerichtet" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:287 msgctxt "@label" msgid "This printer is the host for a group of %1 connected Ultimaker 3 printers" -msgstr "" +msgstr "Dieser Drucker ist der Host für eine Gruppe von %1 verbundenen Ultimaker 3-Druckern" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:24 msgctxt "@title:window" msgid "Print over network" -msgstr "" +msgstr "Drucken über Netzwerk" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:92 msgctxt "@action:button" @@ -1567,98 +1561,98 @@ msgstr "Drucken" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:50 msgctxt "@label: arg 1 is group name" msgid "%1 is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "%1 ist nicht für das Hosten einer Gruppe verbundener Ultimaker 3-Drucker eingerichtet" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:311 msgctxt "@label:status" msgid "Printing" -msgstr "" +msgstr "Drucken" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:315 msgctxt "@label:status" msgid "Reserved" -msgstr "" +msgstr "Reserviert" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:317 msgctxt "@label:status" msgid "Finished" -msgstr "" +msgstr "Beendet" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:320 msgctxt "@label:status" msgid "Preparing" -msgstr "" +msgstr "Vorbereitung" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:327 msgctxt "@label:status" msgid "Available" -msgstr "" +msgstr "Verfügbar" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:367 msgctxt "@label" msgid "Completed on: " -msgstr "" +msgstr "Fertiggestellt am: " #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:371 msgctxt "@label" msgid "Clear build plate" -msgstr "" +msgstr "Druckplatte räumen" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:375 msgctxt "@label" msgid "Preparing to print" -msgstr "" +msgstr "Vorbereitung für den Druck" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:379 msgctxt "@label" msgid "Not accepting print jobs" -msgstr "" +msgstr "Akzeptiert keine Druckaufträge" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:14 msgctxt "@info:tooltip" msgid "Opens the print jobs page with your default web browser." -msgstr "" +msgstr "Öffnet die Seite für Druckaufträge mit Ihrem Standard-Webbrowser." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:15 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:154 msgctxt "@action:button" msgid "View print jobs" -msgstr "" +msgstr "Druckaufträge anzeigen" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:36 msgctxt "@label" msgid "PRINTER GROUP" -msgstr "" +msgstr "DRUCKERGRUPPE" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:69 msgctxt "@title" msgid "Print jobs" -msgstr "" +msgstr "Druckaufträge" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:100 msgctxt "@label" msgid "Printing" -msgstr "" +msgstr "Drucken" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:118 msgctxt "@label" msgid "Queued" -msgstr "" +msgstr "In Warteschlange" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:135 msgctxt "@label" msgid "Waiting for configuration change" -msgstr "" +msgstr "Warten auf eine Konfigurationsänderung" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:194 msgctxt "@label:title" msgid "Printers" -msgstr "" +msgstr "Drucker" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:247 msgctxt "@action:button" msgid "View printers" -msgstr "" +msgstr "Drucker anzeigen" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/ConfigDialog.qml:20 msgctxt "@title:window" @@ -2049,7 +2043,7 @@ msgstr "Installiert" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:199 msgctxt "@title:window" msgid "Plugin License Agreement" -msgstr "" +msgstr "Plugin für Lizenzvereinbarung" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:220 msgctxt "@label" @@ -2057,17 +2051,17 @@ msgid "" " plugin contains a license.\n" "You need to accept this license to install this plugin.\n" "Do you agree with the terms below?" -msgstr "" +msgstr " Das Plugin enthält eine Lizenz.\nSie müssen diese Lizenz akzeptieren, um das Plugin zu installieren.\nStimmen Sie den nachfolgenden Bedingungen zu?" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:242 msgctxt "@action:button" msgid "Accept" -msgstr "" +msgstr "Akzeptieren" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:253 msgctxt "@action:button" msgid "Decline" -msgstr "" +msgstr "Ablehnen" #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml:25 #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:25 @@ -2322,9 +2316,7 @@ msgctxt "@text:window" msgid "" "You have customized some profile settings.\n" "Would you like to keep or discard those settings?" -msgstr "" -"Sie haben einige Profileinstellungen angepasst.\n" -"Möchten Sie diese Einstellungen übernehmen oder verwerfen?" +msgstr "Sie haben einige Profileinstellungen angepasst.\nMöchten Sie diese Einstellungen übernehmen oder verwerfen?" #: /home/ruben/Projects/Cura/resources/qml/DiscardOrKeepProfileChangesDialog.qml:110 msgctxt "@title:column" @@ -2908,12 +2900,12 @@ msgstr "Material importieren" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:320 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" -msgstr "" +msgstr "Material konnte nicht importiert werden %1: %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:324 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" -msgstr "" +msgstr "Material wurde erfolgreich importiert %1" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:343 #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:358 @@ -2924,12 +2916,12 @@ msgstr "Material exportieren" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:362 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" -msgstr "" +msgstr "Exportieren des Materials nach %1: %2 schlug fehl" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:368 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" -msgstr "" +msgstr "Material erfolgreich nach %1 exportiert" #: /home/ruben/Projects/Cura/resources/qml/AddMachineDialog.qml:18 #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:766 @@ -2962,9 +2954,7 @@ msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" -msgstr "" -"Cura wurde von Ultimaker B.V. in Zusammenarbeit mit der Community entwickelt.\n" -"Cura verwendet mit Stolz die folgenden Open Source-Projekte:" +msgstr "Cura wurde von Ultimaker B.V. in Zusammenarbeit mit der Community entwickelt.\nCura verwendet mit Stolz die folgenden Open Source-Projekte:" #: /home/ruben/Projects/Cura/resources/qml/AboutDialog.qml:118 msgctxt "@label" @@ -3067,10 +3057,7 @@ msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." -msgstr "" -"Einige Einstellungs-/Überschreibungswerte unterscheiden sich von den im Profil gespeicherten Werten.\n" -"\n" -"Klicken Sie, um den Profilmanager zu öffnen." +msgstr "Einige Einstellungs-/Überschreibungswerte unterscheiden sich von den im Profil gespeicherten Werten.\n\nKlicken Sie, um den Profilmanager zu öffnen." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:145 msgctxt "@label:textbox" @@ -3108,10 +3095,7 @@ msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." -msgstr "" -"Einige ausgeblendete Einstellungen verwenden Werte, die von ihren normalen, berechneten Werten abweichen.\n" -"\n" -"Klicken Sie, um diese Einstellungen sichtbar zu machen." +msgstr "Einige ausgeblendete Einstellungen verwenden Werte, die von ihren normalen, berechneten Werten abweichen.\n\nKlicken Sie, um diese Einstellungen sichtbar zu machen." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:62 msgctxt "@label Header for list of settings." @@ -3139,10 +3123,7 @@ msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." -msgstr "" -"Diese Einstellung hat einen vom Profil abweichenden Wert.\n" -"\n" -"Klicken Sie, um den Wert des Profils wiederherzustellen." +msgstr "Diese Einstellung hat einen vom Profil abweichenden Wert.\n\nKlicken Sie, um den Wert des Profils wiederherzustellen." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:284 msgctxt "@label" @@ -3150,10 +3131,7 @@ msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." -msgstr "" -"Diese Einstellung wird normalerweise berechnet; aktuell ist jedoch ein Absolutwert eingestellt.\n" -"\n" -"Klicken Sie, um den berechneten Wert wiederherzustellen." +msgstr "Diese Einstellung wird normalerweise berechnet; aktuell ist jedoch ein Absolutwert eingestellt.\n\nKlicken Sie, um den berechneten Wert wiederherzustellen." #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:118 msgctxt "@label:listbox" @@ -3165,9 +3143,7 @@ msgctxt "@label:listbox" msgid "" "Print Setup disabled\n" "G-code files cannot be modified" -msgstr "" -"Druckeinrichtung deaktiviert\n" -"G-Code-Dateien können nicht geändert werden" +msgstr "Druckeinrichtung deaktiviert\nG-Code-Dateien können nicht geändert werden" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:326 msgctxt "@label" @@ -3177,22 +3153,22 @@ msgstr "00 Stunden 00 Minuten" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:344 msgctxt "@tooltip" msgid "Time information" -msgstr "" +msgstr "Zeitangaben" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:370 msgctxt "@description" msgid "Print time" -msgstr "" +msgstr "Druckzeit" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:409 msgctxt "@label" msgid "%1m / ~ %2g / ~ %4 %3" -msgstr "" +msgstr "%1m / ~ %2g / ~ %4 %3" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:414 msgctxt "@label" msgid "%1m / ~ %2g" -msgstr "" +msgstr "%1m / ~ %2g" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:476 msgctxt "@tooltip" @@ -3252,12 +3228,12 @@ msgstr "Es ist kein Drucker verbunden" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:157 msgctxt "@label" msgid "Extruder" -msgstr "" +msgstr "Extruder" #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:120 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." -msgstr "" +msgstr "Die Zieltemperatur des Hotend. Das Hotend wird auf diese Temperatur aufgeheizt oder abgekühlt. Wenn der Wert 0 beträgt, wird die Hotend-Heizung ausgeschaltet." #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:152 msgctxt "@tooltip" @@ -3726,27 +3702,27 @@ msgstr "Vorbereiten" #: /home/ruben/Projects/Cura/resources/qml/Topbar.qml:79 msgctxt "@title:tab" msgid "Monitor" -msgstr "" +msgstr "Überwachen" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:50 msgctxt "@label" msgid "Layer Height" -msgstr "" +msgstr "Schichtdicke" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:62 msgctxt "@label" msgid "Print Speed" -msgstr "" +msgstr "Druckgeschwindigkeit" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:73 msgctxt "@label" msgid "Slower" -msgstr "" +msgstr "Langsamer" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:85 msgctxt "@label" msgid "Faster" -msgstr "" +msgstr "Schneller" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:416 msgctxt "@label" @@ -3761,7 +3737,7 @@ msgstr "Die graduelle Füllung steigert die Menge der Füllung nach oben hin sch #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:602 msgctxt "@label" msgid "Enable gradual" -msgstr "" +msgstr "Graduell aktivieren" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:668 msgctxt "@label" @@ -3838,7 +3814,7 @@ msgstr "Material" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:374 msgctxt "@label" msgid "Check material compatibility" -msgstr "" +msgstr "\n" "Language-Team: Spanish\n" "Language: es_ES\n" @@ -24,7 +24,7 @@ msgstr "Ajustes de la máquina" #: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" -msgstr "" +msgstr "Vista de rayos X" #: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" @@ -39,17 +39,17 @@ msgstr "Archivo GCode" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:65 msgctxt "@action:button" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Imprimir con un enrutador Doodle3D" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:66 msgctxt "@properties:tooltip" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Imprimir con un enrutador Doodle3D" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:86 msgctxt "@info:status" msgid "Connecting to Doodle3D Connect" -msgstr "" +msgstr "Conectar con Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:87 #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:155 @@ -73,32 +73,32 @@ msgstr "Cancelar" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:154 msgctxt "@info:status" msgid "Sending data to Doodle3D Connect" -msgstr "" +msgstr "Enviando datos a Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:161 msgctxt "@info:status" msgid "Unable to send data to Doodle3D Connect. Is another job still active?" -msgstr "" +msgstr "No se pueden enviar datos a Doodle3D Connect. ¿Hay otro trabajo que todavía esté activo?" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:175 msgctxt "@info:status" msgid "Storing data on Doodle3D Connect" -msgstr "" +msgstr "Guardando datos en Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:213 msgctxt "@info:status" msgid "File sent to Doodle3D Connect" -msgstr "" +msgstr "Archivo enviado a Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@action:button" msgid "Open Connect.." -msgstr "" +msgstr "Abrir Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@info:tooltip" msgid "Open the Doodle3D Connect web interface" -msgstr "" +msgstr "Abrir la interfaz web de Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/ChangeLogPlugin/ChangeLog.py:35 msgctxt "@item:inmenu" @@ -143,7 +143,7 @@ msgstr "No se puede iniciar un trabajo nuevo porque la impresora está ocupada o #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:153 msgctxt "@info:title" msgid "Print Details" -msgstr "" +msgstr "Datos de impresión" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:status" @@ -153,7 +153,7 @@ msgstr "Esta impresora no es compatible con la impresión USB porque utiliza el #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:title" msgid "USB Printing" -msgstr "" +msgstr "Impresión USB" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:460 msgctxt "@info:status" @@ -168,7 +168,7 @@ msgstr "No se puede iniciar un trabajo nuevo porque la impresora no es compatibl #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1296 msgctxt "@info:title" msgid "Warning" -msgstr "" +msgstr "Advertencia" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:108 msgctxt "@info" @@ -184,7 +184,7 @@ msgstr "No se pudo encontrar el firmware necesario para la impresora en %s." #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:122 msgctxt "@info:title" msgid "Printer Firmware" -msgstr "" +msgstr "Firmware de la impresora" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." @@ -201,25 +201,25 @@ msgstr "Guardar en unidad extraíble {0}" #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" -msgstr "" +msgstr "Guardando en unidad extraíble {0}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:89 msgctxt "@info:title" msgid "Saving" -msgstr "" +msgstr "Guardando" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:99 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:102 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" -msgstr "" +msgstr "No se pudo guardar en {0}: {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:118 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." -msgstr "" +msgstr "No se pudo encontrar un nombre de archivo al tratar de escribir en {device}." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:131 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146 @@ -236,7 +236,7 @@ msgstr "No se pudo guardar en unidad extraíble {0}: {1}" #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1305 msgctxt "@info:title" msgid "Error" -msgstr "" +msgstr "Error" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 #, python-brace-format @@ -247,7 +247,7 @@ msgstr "Guardado en unidad extraíble {0} como {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 msgctxt "@info:title" msgid "File Saved" -msgstr "" +msgstr "Archivo guardado" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 msgctxt "@action:button" @@ -269,7 +269,7 @@ msgstr "Expulsado {0}. Ahora puede retirar de forma segura la unidad." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:156 msgctxt "@info:title" msgid "Safely Remove Hardware" -msgstr "" +msgstr "Retirar de forma segura el hardware" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:158 #, python-brace-format @@ -304,7 +304,7 @@ msgstr "Acceso a la impresora solicitado. Apruebe la solicitud en la impresora." #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:157 msgctxt "@info:title" msgid "Connection status" -msgstr "" +msgstr "Estado de la conexión" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:158 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:158 @@ -319,7 +319,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:500 msgctxt "@info:title" msgid "Connection Status" -msgstr "" +msgstr "Estado de la conexión" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:159 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:159 @@ -417,7 +417,7 @@ msgstr "No se puede iniciar un trabajo nuevo de impresión, la impresora está o #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:650 msgctxt "@info:title" msgid "Printer Status" -msgstr "" +msgstr "Estado de la impresora" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:674 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:660 @@ -488,7 +488,7 @@ msgstr "Enviando datos a la impresora" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:839 msgctxt "@info:title" msgid "Sending Data" -msgstr "" +msgstr "Enviando datos" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:908 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:890 @@ -547,73 +547,73 @@ msgstr "Conectar a través de la red" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:103 msgid "This printer is not set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "La impresora no está configurada para alojar un grupo de impresoras conectadas de Ultimaker 3." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:104 #, python-brace-format msgctxt "Count is number of printers." msgid "This printer is the host for a group of {count} connected Ultimaker 3 printers." -msgstr "" +msgstr "La impresora aloja un grupo de {count} impresoras conectadas de Ultimaker 3." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:105 #, python-brace-format msgid "{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate." -msgstr "" +msgstr "{printer_name} ha terminado de imprimir «{job_name}». Recoja el impreso y confirme que ha borrado la placa de impresión." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:106 #, python-brace-format msgid "{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing." -msgstr "" +msgstr "{printer_name} está reservada para imprimir «{job_name}». Modifique la configuración de la impresora de modo que se adapte al trabajo para comenzar la impresión." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:196 msgctxt "@info:status" msgid "Sending new jobs (temporarily) blocked, still sending the previous print job." -msgstr "" +msgstr "Envío de nuevos trabajos (temporalmente) bloqueado; se sigue enviando el trabajo de impresión previo." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:212 msgctxt "@info:status" msgid "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "No se pudo enviar el nuevo trabajo de impresión: esta impresora 3D (todavía) no está configurada para alojar un grupo de impresoras de Ultimaker 3 conectadas." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:425 #, python-brace-format msgctxt "@info:progress" msgid "Sending {file_name} to group {cluster_name}" -msgstr "" +msgstr "Enviando {file_name} al grupo {cluster_name}" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:498 #, python-brace-format msgctxt "@info:status" msgid "Sent {file_name} to group {cluster_name}." -msgstr "" +msgstr "Enviar {file_name} al grupo {cluster_name}." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:503 msgctxt "@action:button" msgid "Show print jobs" -msgstr "" +msgstr "Mostrar trabajos de impresión" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:504 msgctxt "@info:tooltip" msgid "Opens the print jobs interface in your browser." -msgstr "" +msgstr "Abre la interfaz de trabajos de impresión en el navegador." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:520 #, python-brace-format msgctxt "@info:status" msgid "Unable to send print job to group {cluster_name}." -msgstr "" +msgstr "No se puede enviar el trabajo de impresión al grupo {cluster_name}." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:71 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "To ensure that your {machine_name} is equipped with the latest features it is recommended to update the firmware regularly. This can be done on the {machine_name} (when connected to the network) or via USB." -msgstr "" +msgstr "Para garantizar que su {machine_name} disponga de las prestaciones más recientes, se recomienda actualizar el firmware con regularidad. Esto se puede hacer en la {machine_name} (cuando esté conectada a la red) o vía USB." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:72 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s firmware available" -msgstr "" +msgstr "Nuevo firmware de %s disponible" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:73 #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:149 @@ -624,7 +624,7 @@ msgstr "Descargar" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:83 msgctxt "@info" msgid "Could not access update information." -msgstr "" +msgstr "No se pudo acceder a la información actualizada." #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:199 msgctxt "@info:status" @@ -663,7 +663,7 @@ msgstr "Cura recopila de forma anónima información de la segmentación. Puede #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:46 msgctxt "@info:title" msgid "Collecting Data" -msgstr "" +msgstr "Recopilando datos" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:48 msgctxt "@action:button" @@ -684,7 +684,7 @@ msgstr "Archivo GCode" #: /home/ruben/Projects/Cura/plugins/LayerView/__init__.py:13 msgctxt "@item:inlistbox" msgid "Layer view" -msgstr "" +msgstr "Vista de capas" #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:93 msgctxt "@info:status" @@ -694,7 +694,7 @@ msgstr "Cura no muestra correctamente las capas si la impresión de alambre est #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:94 msgctxt "@info:title" msgid "Layer View" -msgstr "" +msgstr "Vista de capas" #: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" @@ -724,7 +724,7 @@ msgstr "Imagen GIF" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." -msgstr "" +msgstr "No se puede segmentar con el material actual, ya que es incompatible con el dispositivo o la configuración seleccionados." #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:297 @@ -732,7 +732,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:316 msgctxt "@info:title" msgid "Unable to slice" -msgstr "" +msgstr "No se puede segmentar" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:296 #, python-brace-format @@ -759,7 +759,7 @@ msgstr "Procesando capas" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:238 msgctxt "@info:title" msgid "Information" -msgstr "" +msgstr "Información" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" @@ -798,18 +798,18 @@ msgstr "Tobera" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:28 msgctxt "@menuitem" msgid "Browse plugins" -msgstr "" +msgstr "Examinar complementos" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:163 #, python-brace-format msgctxt "@info:status" msgid "Failed to get plugin ID from {0}" -msgstr "" +msgstr "No se pudo obtener la ID del complemento de {0}" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:164 msgctxt "@info:tile" msgid "Warning" -msgstr "" +msgstr "Advertencia" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:202 msgctxt "@window:title" @@ -819,7 +819,7 @@ msgstr "Explorador de complementos" #: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" -msgstr "" +msgstr "Vista de sólidos" #: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" @@ -835,7 +835,7 @@ msgstr "Analizar GCode" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:370 msgctxt "@info:title" msgid "G-code Details" -msgstr "" +msgstr "Datos de GCode" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:368 msgctxt "@info:generic" @@ -917,7 +917,7 @@ msgstr "Soporte" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:95 msgctxt "@tooltip" msgid "Skirt" -msgstr "" +msgstr "Falda" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:96 msgctxt "@tooltip" @@ -958,7 +958,7 @@ msgstr "Buscando nueva ubicación para los objetos" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:34 msgctxt "@info:title" msgid "Finding Location" -msgstr "" +msgstr "Buscando ubicación" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:89 #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 @@ -969,7 +969,7 @@ msgstr "No se puede encontrar una ubicación dentro del volumen de impresión pa #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:90 msgctxt "@info:title" msgid "Can't Find Location" -msgstr "" +msgstr "No se puede encontrar la ubicación" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:431 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:112 @@ -982,7 +982,7 @@ msgstr "El archivo ya existe" #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" -msgstr "" +msgstr "El archivo {0} ya existe. ¿Está seguro de que desea sobrescribirlo?" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:815 msgctxt "@label" @@ -1003,7 +1003,7 @@ msgstr "El material seleccionado no es compatible con la máquina o la configura #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:title" msgid "Incompatible Material" -msgstr "" +msgstr "Material incompatible" #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:status Has a cancel button next to it." @@ -1024,24 +1024,24 @@ msgstr "Deshacer cambio del diámetro del material." #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" -msgstr "" +msgstr "Error al exportar el perfil a {0}: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:150 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." -msgstr "" +msgstr "Error al exportar el perfil a {0}: Error en el complemento de escritura." #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:155 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" -msgstr "" +msgstr "Perfil exportado a {0}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 msgctxt "@info:title" msgid "Export Details" -msgstr "" +msgstr "Datos de exportación" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:182 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:204 @@ -1050,7 +1050,7 @@ msgstr "" #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to import profile from {0}: {1}" -msgstr "" +msgstr "Error al importar el perfil de {0}: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:215 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:251 @@ -1089,7 +1089,7 @@ msgstr "La altura del volumen de impresión se ha reducido debido al valor del a #: /home/ruben/Projects/Cura/cura/BuildVolume.py:102 msgctxt "@info:title" msgid "Build Volume" -msgstr "" +msgstr "Volumen de impresión" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:34 msgctxt "@info:status" @@ -1100,7 +1100,7 @@ msgstr "Multiplicar y colocar objetos" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 msgctxt "@info:title" msgid "Placing Object" -msgstr "" +msgstr "Colocando objeto" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:54 msgctxt "@title:window" @@ -1113,10 +1113,7 @@ msgid "" "

A fatal exception has occurred that we could not recover from!

\n" "

Please use the information below to post a bug report at http://github.com/Ultimaker/Cura/issues

\n" " " -msgstr "" -"

Se ha producido una excepción fatal de la que no podemos recuperarnos.

\n" -"

Use la siguiente información para enviar un informe de error a http://github.com/Ultimaker/Cura/issues

\n" -" " +msgstr "

Se ha producido una excepción fatal de la que no podemos recuperarnos.

\n

Use la siguiente información para enviar un informe de error a http://github.com/Ultimaker/Cura/issues

\n " #: /home/ruben/Projects/Cura/cura/CrashHandler.py:112 msgctxt "@action:button" @@ -1418,10 +1415,7 @@ msgid "" "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n" "\n" "Select your printer from the list below:" -msgstr "" -"Para imprimir directamente en la impresora a través de la red, asegúrese de que esta está conectada a la red utilizando un cable de red o conéctela a la red wifi. Si no conecta Cura con la impresora, también puede utilizar una unidad USB para transferir archivos GCode a la impresora.\n" -"\n" -"Seleccione la impresora de la siguiente lista:" +msgstr "Para imprimir directamente en la impresora a través de la red, asegúrese de que esta está conectada a la red utilizando un cable de red o conéctela a la red wifi. Si no conecta Cura con la impresora, también puede utilizar una unidad USB para transferir archivos GCode a la impresora.\n\nSeleccione la impresora de la siguiente lista:" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:75 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:75 @@ -1547,17 +1541,17 @@ msgstr "Activar configuración" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:284 msgctxt "@label" msgid "This printer is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "La impresora no está configurada para alojar un grupo de impresoras conectadas de Ultimaker 3" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:287 msgctxt "@label" msgid "This printer is the host for a group of %1 connected Ultimaker 3 printers" -msgstr "" +msgstr "La impresora aloja un grupo de %1 impresoras conectadas de Ultimaker 3" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:24 msgctxt "@title:window" msgid "Print over network" -msgstr "" +msgstr "Imprimir a través de la red" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:92 msgctxt "@action:button" @@ -1567,98 +1561,98 @@ msgstr "Imprimir" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:50 msgctxt "@label: arg 1 is group name" msgid "%1 is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "%1 no está configurada para alojar un grupo de impresoras conectadas de Ultimaker 3" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:311 msgctxt "@label:status" msgid "Printing" -msgstr "" +msgstr "Imprimiendo" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:315 msgctxt "@label:status" msgid "Reserved" -msgstr "" +msgstr "Reservado" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:317 msgctxt "@label:status" msgid "Finished" -msgstr "" +msgstr "Terminado" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:320 msgctxt "@label:status" msgid "Preparing" -msgstr "" +msgstr "Preparando" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:327 msgctxt "@label:status" msgid "Available" -msgstr "" +msgstr "Disponible" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:367 msgctxt "@label" msgid "Completed on: " -msgstr "" +msgstr "Completado el: " #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:371 msgctxt "@label" msgid "Clear build plate" -msgstr "" +msgstr "Borrar placa de impresión" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:375 msgctxt "@label" msgid "Preparing to print" -msgstr "" +msgstr "Preparando para impresión" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:379 msgctxt "@label" msgid "Not accepting print jobs" -msgstr "" +msgstr "No se aceptan trabajos de impresión" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:14 msgctxt "@info:tooltip" msgid "Opens the print jobs page with your default web browser." -msgstr "" +msgstr "Abre la página de trabajos de impresión en su navegador web por defecto." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:15 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:154 msgctxt "@action:button" msgid "View print jobs" -msgstr "" +msgstr "Ver trabajos de impresión" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:36 msgctxt "@label" msgid "PRINTER GROUP" -msgstr "" +msgstr "GRUPO DE IMPRESORAS" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:69 msgctxt "@title" msgid "Print jobs" -msgstr "" +msgstr "Trabajos de impresión" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:100 msgctxt "@label" msgid "Printing" -msgstr "" +msgstr "Imprimiendo" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:118 msgctxt "@label" msgid "Queued" -msgstr "" +msgstr "En cola" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:135 msgctxt "@label" msgid "Waiting for configuration change" -msgstr "" +msgstr "Esperando a que se cambie la configuración" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:194 msgctxt "@label:title" msgid "Printers" -msgstr "" +msgstr "Impresoras" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:247 msgctxt "@action:button" msgid "View printers" -msgstr "" +msgstr "Ver impresoras" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/ConfigDialog.qml:20 msgctxt "@title:window" @@ -2049,7 +2043,7 @@ msgstr "Instalado" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:199 msgctxt "@title:window" msgid "Plugin License Agreement" -msgstr "" +msgstr "Acuerdo de licencia de complemento" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:220 msgctxt "@label" @@ -2057,17 +2051,17 @@ msgid "" " plugin contains a license.\n" "You need to accept this license to install this plugin.\n" "Do you agree with the terms below?" -msgstr "" +msgstr " El complemento incluye una licencia.\nDebe aceptar dicha licencia para instalar el complemento.\n¿Acepta las siguientes condiciones?" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:242 msgctxt "@action:button" msgid "Accept" -msgstr "" +msgstr "Aceptar" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:253 msgctxt "@action:button" msgid "Decline" -msgstr "" +msgstr "Rechazar" #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml:25 #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:25 @@ -2322,9 +2316,7 @@ msgctxt "@text:window" msgid "" "You have customized some profile settings.\n" "Would you like to keep or discard those settings?" -msgstr "" -"Ha personalizado parte de los ajustes del perfil.\n" -"¿Desea descartar los cambios o guardarlos?" +msgstr "Ha personalizado parte de los ajustes del perfil.\n¿Desea descartar los cambios o guardarlos?" #: /home/ruben/Projects/Cura/resources/qml/DiscardOrKeepProfileChangesDialog.qml:110 msgctxt "@title:column" @@ -2908,12 +2900,12 @@ msgstr "Importar material" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:320 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" -msgstr "" +msgstr "No se pudo importar el material en %1: %2." #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:324 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" -msgstr "" +msgstr "El material se ha importado correctamente en %1." #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:343 #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:358 @@ -2924,12 +2916,12 @@ msgstr "Exportar material" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:362 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" -msgstr "" +msgstr "Se ha producido un error al exportar el material a %1: %2." #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:368 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" -msgstr "" +msgstr "El material se ha exportado correctamente a %1." #: /home/ruben/Projects/Cura/resources/qml/AddMachineDialog.qml:18 #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:766 @@ -2962,9 +2954,7 @@ msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" -msgstr "" -"Ultimaker B.V. ha desarrollado Cura en cooperación con la comunidad.\n" -"Cura se enorgullece de utilizar los siguientes proyectos de código abierto:" +msgstr "Ultimaker B.V. ha desarrollado Cura en cooperación con la comunidad.\nCura se enorgullece de utilizar los siguientes proyectos de código abierto:" #: /home/ruben/Projects/Cura/resources/qml/AboutDialog.qml:118 msgctxt "@label" @@ -3067,10 +3057,7 @@ msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." -msgstr "" -"Algunos valores de los ajustes o sobrescrituras son distintos a los valores almacenados en el perfil.\n" -"\n" -"Haga clic para abrir el administrador de perfiles." +msgstr "Algunos valores de los ajustes o sobrescrituras son distintos a los valores almacenados en el perfil.\n\nHaga clic para abrir el administrador de perfiles." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:145 msgctxt "@label:textbox" @@ -3108,10 +3095,7 @@ msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." -msgstr "" -"Algunos ajustes ocultos utilizan valores diferentes de los valores normales calculados.\n" -"\n" -"Haga clic para mostrar estos ajustes." +msgstr "Algunos ajustes ocultos utilizan valores diferentes de los valores normales calculados.\n\nHaga clic para mostrar estos ajustes." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:62 msgctxt "@label Header for list of settings." @@ -3139,10 +3123,7 @@ msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." -msgstr "" -"Este ajuste tiene un valor distinto del perfil.\n" -"\n" -"Haga clic para restaurar el valor del perfil." +msgstr "Este ajuste tiene un valor distinto del perfil.\n\nHaga clic para restaurar el valor del perfil." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:284 msgctxt "@label" @@ -3150,10 +3131,7 @@ msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." -msgstr "" -"Este ajuste se calcula normalmente pero actualmente tiene un valor absoluto establecido.\n" -"\n" -"Haga clic para restaurar el valor calculado." +msgstr "Este ajuste se calcula normalmente pero actualmente tiene un valor absoluto establecido.\n\nHaga clic para restaurar el valor calculado." #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:118 msgctxt "@label:listbox" @@ -3165,9 +3143,7 @@ msgctxt "@label:listbox" msgid "" "Print Setup disabled\n" "G-code files cannot be modified" -msgstr "" -"Ajustes de impresión deshabilitados\n" -"No se pueden modificar los archivos GCode" +msgstr "Ajustes de impresión deshabilitados\nNo se pueden modificar los archivos GCode" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:326 msgctxt "@label" @@ -3177,22 +3153,22 @@ msgstr "00h 00min" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:344 msgctxt "@tooltip" msgid "Time information" -msgstr "" +msgstr "Información sobre el tiempo" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:370 msgctxt "@description" msgid "Print time" -msgstr "" +msgstr "Tiempo de impresión" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:409 msgctxt "@label" msgid "%1m / ~ %2g / ~ %4 %3" -msgstr "" +msgstr "%1m / ~ %2g/ ~ %4 %3" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:414 msgctxt "@label" msgid "%1m / ~ %2g" -msgstr "" +msgstr "%1m / ~ %2g" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:476 msgctxt "@tooltip" @@ -3252,12 +3228,12 @@ msgstr "No hay ninguna impresora conectada" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:157 msgctxt "@label" msgid "Extruder" -msgstr "" +msgstr "Extrusor" #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:120 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." -msgstr "" +msgstr "Temperatura objetivo del extremo caliente. El extremo caliente se calentará o enfriará en función de esta temperatura. Si el valor es 0, el calentamiento del extremo caliente se desactivará." #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:152 msgctxt "@tooltip" @@ -3726,27 +3702,27 @@ msgstr "Preparar" #: /home/ruben/Projects/Cura/resources/qml/Topbar.qml:79 msgctxt "@title:tab" msgid "Monitor" -msgstr "" +msgstr "Supervisar" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:50 msgctxt "@label" msgid "Layer Height" -msgstr "" +msgstr "Altura de capa" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:62 msgctxt "@label" msgid "Print Speed" -msgstr "" +msgstr "Velocidad de impresión" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:73 msgctxt "@label" msgid "Slower" -msgstr "" +msgstr "Más lento" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:85 msgctxt "@label" msgid "Faster" -msgstr "" +msgstr "Más rápido" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:416 msgctxt "@label" @@ -3761,7 +3737,7 @@ msgstr "Un relleno gradual aumentará gradualmente la cantidad de relleno hacia #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:602 msgctxt "@label" msgid "Enable gradual" -msgstr "" +msgstr "Habilitar gradual" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:668 msgctxt "@label" @@ -3838,7 +3814,7 @@ msgstr "Material" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:374 msgctxt "@label" msgid "Check material compatibility" -msgstr "" +msgstr "Comprobar la compatibilidad de los materiales" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:394 msgctxt "@tooltip" @@ -3898,12 +3874,12 @@ msgstr "God Mode" #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box." -msgstr "" +msgstr "Acepta códigos GCode y los envía a un enrutador Doodle3D por medio de wifi." #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "name" msgid "Doodle3D WiFi-Box" -msgstr "" +msgstr "Enrutador Doodle3D" #: ChangeLogPlugin/plugin.json msgctxt "description" @@ -3958,17 +3934,17 @@ msgstr "Conexión de red UM3" #: CuraPrintClusterUpload/plugin.json msgctxt "name" msgid "UM3 Network Connection (Cluster)" -msgstr "" +msgstr "Conexión de red UM3 (grupo)" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." -msgstr "" +msgstr "Busca actualizaciones de firmware." #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" -msgstr "" +msgstr "Buscador de actualizaciones de firmware" #: CuraSolidWorksPlugin/plugin.json msgctxt "description" @@ -4063,12 +4039,12 @@ msgstr "Actualización de la versión 2.5 a la 2.6" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." -msgstr "" +msgstr "Actualiza la configuración de Cura 2.7 a Cura 3.0." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" -msgstr "" +msgstr "Actualización de la versión 2.7 a la 3.0" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" @@ -4973,4 +4949,4 @@ msgstr "Lector de perfiles de Cura" #~ msgctxt "@label:" #~ msgid "Print Again" -#~ msgstr "Volver a imprimir" +#~ msgstr "Volver a imprimir" \ No newline at end of file diff --git a/resources/i18n/es_ES/fdmprinter.def.json.po b/resources/i18n/es_ES/fdmprinter.def.json.po index eed272eb61..b472fd44a7 100644 --- a/resources/i18n/es_ES/fdmprinter.def.json.po +++ b/resources/i18n/es_ES/fdmprinter.def.json.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:31+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: Spanish\n" "Language: es_ES\n" @@ -56,9 +56,7 @@ msgctxt "machine_start_gcode description" msgid "" "Gcode commands to be executed at the very start - separated by \n" "." -msgstr "" -"Los comandos de Gcode que se ejecutarán justo al inicio, separados por \n" -"." +msgstr "Los comandos de Gcode que se ejecutarán justo al inicio - separados por \n." #: fdmprinter.def.json msgctxt "machine_end_gcode label" @@ -70,9 +68,7 @@ msgctxt "machine_end_gcode description" msgid "" "Gcode commands to be executed at the very end - separated by \n" "." -msgstr "" -"Los comandos de Gcode que se ejecutarán justo al final, separados por \n" -"." +msgstr "Los comandos de Gcode que se ejecutarán justo al final - separados por \n." #: fdmprinter.def.json msgctxt "material_guid label" @@ -1122,7 +1118,7 @@ msgstr "Aleatoria" #: fdmprinter.def.json msgctxt "z_seam_type option sharpest_corner" msgid "Sharpest Corner" -msgstr "" +msgstr "Esquina más pronunciada" #: fdmprinter.def.json msgctxt "z_seam_x label" @@ -1147,32 +1143,32 @@ msgstr "Coordenada Y de la posición cerca de donde se comienza a imprimir cada #: fdmprinter.def.json msgctxt "z_seam_corner label" msgid "Seam Corner Preference" -msgstr "" +msgstr "Preferencia de esquina de costura" #: fdmprinter.def.json msgctxt "z_seam_corner description" msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner." -msgstr "" +msgstr "Controlar si las esquinas del contorno del modelo influyen en la posición de la costura. «Ninguno» significa que las esquinas no influyen en la posición de la costura. «Ocultar costura» significa que es probable que la costura se realice en una esquina interior. «Mostrar costura» significa que es probable que la costura sea en una esquina exterior. «Ocultar o mostrar costura» significa que es probable que la costura se realice en una esquina interior o exterior." #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_none" msgid "None" -msgstr "" +msgstr "Ninguno" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_inner" msgid "Hide Seam" -msgstr "" +msgstr "Ocultar costura" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" -msgstr "" +msgstr "Mostrar costura" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_any" msgid "Hide or Expose Seam" -msgstr "" +msgstr "Ocultar o mostrar costura" #: fdmprinter.def.json msgctxt "z_seam_relative label" @@ -1252,7 +1248,7 @@ msgstr "Patrón de relleno" #: fdmprinter.def.json msgctxt "infill_pattern description" msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, cubic, octet, quarter cubic and concentric patterns are fully printed every layer. Cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction." -msgstr "" +msgstr "Patrón del material de relleno de la impresión. El relleno de línea y zigzag cambia de dirección en capas alternas, con lo que se reduce el coste del material. Los patrones de rejilla, triángulo, cúbico, de octeto, cúbico bitruncado y concéntrico se imprimen en todas las capas por completo. El relleno cúbico, cúbico bitruncado y de octeto cambian en cada capa para proporcionar una distribución de fuerza equitativa en cada dirección." #: fdmprinter.def.json msgctxt "infill_pattern option grid" @@ -1282,12 +1278,12 @@ msgstr "Subdivisión cúbica" #: fdmprinter.def.json msgctxt "infill_pattern option tetrahedral" msgid "Octet" -msgstr "" +msgstr "Octeto" #: fdmprinter.def.json msgctxt "infill_pattern option quarter_cubic" msgid "Quarter Cubic" -msgstr "" +msgstr "Cúbico bitruncado" #: fdmprinter.def.json msgctxt "infill_pattern option concentric" @@ -1307,22 +1303,22 @@ msgstr "Zigzag" #: fdmprinter.def.json msgctxt "infill_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Cruz" #: fdmprinter.def.json msgctxt "infill_pattern option cross_3d" msgid "Cross 3D" -msgstr "" +msgstr "Cruz 3D" #: fdmprinter.def.json msgctxt "zig_zaggify_infill label" msgid "Connect Infill Lines" -msgstr "" +msgstr "Conectar líneas de relleno" #: fdmprinter.def.json msgctxt "zig_zaggify_infill description" msgid "Connect the ends where the infill pattern meets the inner wall using a lines which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduces the effects on infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used." -msgstr "" +msgstr "Conectar los extremos donde los patrones de relleno se juntan con la pared interior usando una línea que siga la forma de esta. Habilitar este ajuste puede lograr que el relleno se adhiera mejor a las paredes y reduce el efecto del relleno sobre la calidad de las superficies verticales. Deshabilitar este ajuste reduce la cantidad de material utilizado." #: fdmprinter.def.json msgctxt "infill_angles label" @@ -1447,32 +1443,32 @@ msgstr "No genere áreas con un relleno inferior a este (utilice forro)." #: fdmprinter.def.json msgctxt "skin_preshrink label" msgid "Skin Removal Width" -msgstr "" +msgstr "Anchura de retirada del forro" #: fdmprinter.def.json msgctxt "skin_preshrink description" msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "Anchura máxima de las áreas de forro que se deben retirar. Todas las áreas de forro inferiores a este valor desaparecerán. Esto puede contribuir a limitar el tiempo y el material empleados en imprimir el forro superior/inferior en las superficies inclinadas del modelo." #: fdmprinter.def.json msgctxt "top_skin_preshrink label" msgid "Top Skin Removal Width" -msgstr "" +msgstr "Anchura de retirada del forro superior" #: fdmprinter.def.json msgctxt "top_skin_preshrink description" msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model." -msgstr "" +msgstr "Anchura máxima de las áreas superiores de forro que se deben retirar. Todas las áreas de forro inferiores a este valor desaparecerán. Esto puede contribuir a limitar el tiempo y el material empleados en imprimir el forro superior en las superficies inclinadas del modelo." #: fdmprinter.def.json msgctxt "bottom_skin_preshrink label" msgid "Bottom Skin Removal Width" -msgstr "" +msgstr "Anchura de retirada del forro inferior" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink description" msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "Anchura máxima de las áreas inferiores de forro que se deben retirar. Todas las áreas de forro inferiores a este valor desaparecerán. Esto puede contribuir a limitar el tiempo y el material empleados en imprimir el forro inferior en las superficies inclinadas del modelo." #: fdmprinter.def.json msgctxt "expand_skins_expand_distance label" @@ -1482,27 +1478,27 @@ msgstr "Distancia de expansión del forro" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance description" msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "La distancia a la que los forros se expanden en el relleno. Los valores superiores hacen que el forro se adhiera mejor al patrón de relleno y que las paredes de las capas vecinas se adhieran mejor al forro. Los valores inferiores ahorran material." #: fdmprinter.def.json msgctxt "top_skin_expand_distance label" msgid "Top Skin Expand Distance" -msgstr "" +msgstr "Distancia de expansión del forro superior" #: fdmprinter.def.json msgctxt "top_skin_expand_distance description" msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "La distancia a la que los forros superiores se expanden en el relleno. Los valores superiores hacen que el forro se adhiera mejor al patrón de relleno y que las paredes de la capa superior se adhieran mejor al forro. Los valores inferiores ahorran material." #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance label" msgid "Bottom Skin Expand Distance" -msgstr "" +msgstr "Distancia de expansión del forro inferior" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance description" msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used." -msgstr "" +msgstr "La distancia a la que los forros inferiores se expanden en el relleno. Los valores superiores hacen que el forro se adhiera mejor al patrón de relleno y que el forro se adhiera mejor a las paredes de la capa inferior. Los valores inferiores ahorran material." #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion label" @@ -2822,7 +2818,7 @@ msgstr "Zigzag" #: fdmprinter.def.json msgctxt "support_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Cruz" #: fdmprinter.def.json msgctxt "support_connect_zigzags label" @@ -2837,32 +2833,32 @@ msgstr "Conectar los zigzags. Esto aumentará la resistencia de la estructura de #: fdmprinter.def.json msgctxt "support_skip_some_zags label" msgid "Break Up Support In Chunks" -msgstr "" +msgstr "Descomponer el soporte en pedazos" #: fdmprinter.def.json msgctxt "support_skip_some_zags description" msgid "Skip some support line connections to make the support structure easier to break away. This setting is applicable to the Zig Zag support infill pattern." -msgstr "" +msgstr "Omitir algunas conexiones de línea de soporte para que la estructura de soporte sea más fácil de descomponer. Este ajuste es aplicable al patrón de relleno del soporte en zigzag." #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm label" msgid "Support Chunk Size" -msgstr "" +msgstr "Tamaño de los pedazos de soporte" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm description" msgid "Leave out a connection between support lines once every N millimeter to make the support structure easier to break away." -msgstr "" +msgstr "Omitir una conexión entre líneas de soporte una vez cada N milímetros a fin de lograr que la estructura de soporte resulte más fácil de descomponer." #: fdmprinter.def.json msgctxt "support_zag_skip_count label" msgid "Support Chunk Line Count" -msgstr "" +msgstr "Recuento de líneas de pedazos del soporte" #: fdmprinter.def.json msgctxt "support_zag_skip_count description" msgid "Skip one in every N connection lines to make the support structure easier to break away." -msgstr "" +msgstr "Omitir una de cada N líneas de conexión para que la estructura de soporte se descomponga fácilmente." #: fdmprinter.def.json msgctxt "support_infill_rate label" @@ -3404,9 +3400,7 @@ msgctxt "skirt_gap description" msgid "" "The horizontal distance between the skirt and the first layer of the print.\n" "This is the minimum distance, multiple skirt lines will extend outwards from this distance." -msgstr "" -"La distancia horizontal entre la falda y la primera capa de la impresión.\n" -"Esta es la distancia mínima; múltiples líneas de falda se extenderán hacia el exterior a partir de esta distancia." +msgstr "La distancia horizontal entre la falda y la primera capa de la impresión.\nEsta es la distancia mínima; múltiples líneas de falda se extenderán hacia el exterior a partir de esta distancia." #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length label" @@ -3451,22 +3445,22 @@ msgstr "Imprimir solo el borde en el exterior del modelo. Esto reduce el número #: fdmprinter.def.json msgctxt "z_offset_layer_0 label" msgid "Initial Layer Z Offset" -msgstr "" +msgstr "Desplazamiento Z de la capa inicial" #: fdmprinter.def.json msgctxt "z_offset_layer_0 description" msgid "The extruder is offset from the normal height of the first layer by this amount. It can be positive (raised) or negative (lowered). Some filament types adhere to the build plate better if the extruder is raised slightly." -msgstr "" +msgstr "El extrusor se desplaza de la altura normal de la primera capa con este valor, el cual puede ser positivo (elevado) o negativo (bajo). Algunas clases de filamentos se adhieren mejor a la placa de impresión si se levanta ligeramente el extrusor." #: fdmprinter.def.json msgctxt "z_offset_taper_layers label" msgid "Z Offset Taper Layers" -msgstr "" +msgstr "Desplazamiento Z de capas en disminución" #: fdmprinter.def.json msgctxt "z_offset_taper_layers description" msgid "When non-zero, the Z offset is reduced to 0 over that many layers. A value of 0 means that the Z offset remains constant for all the layers in the print." -msgstr "" +msgstr "Si no es cero, el desplazamiento Z se reduce a cero en las capas. Un valor de cero implica que el desplazamiento Z se mantiene constante en todas las capas de impresión." #: fdmprinter.def.json msgctxt "raft_margin label" @@ -3481,12 +3475,12 @@ msgstr "Si la balsa está habilitada, esta es el área adicional de la balsa alr #: fdmprinter.def.json msgctxt "raft_smoothing label" msgid "Raft Smoothing" -msgstr "" +msgstr "Suavizado de la balsa" #: fdmprinter.def.json msgctxt "raft_smoothing description" msgid "This setting control how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle." -msgstr "" +msgstr "Este ajuste controla la medida en que se redondean las esquinas interiores en el contorno de la balsa. Las esquinas hacia el interior se redondean en semicírculo con un radio equivalente al valor aquí indicado. Este ajuste también elimina los orificios del contorno de la balsa que sean más pequeños que dicho círculo." #: fdmprinter.def.json msgctxt "raft_airgap label" @@ -4166,12 +4160,12 @@ msgstr "Suavice los contornos espiralizados para reducir la visibilidad de la co #: fdmprinter.def.json msgctxt "relative_extrusion label" msgid "Relative Extrusion" -msgstr "" +msgstr "Extrusión relativa" #: fdmprinter.def.json msgctxt "relative_extrusion description" msgid "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the Gcode. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any Gcode script is output." -msgstr "" +msgstr "Utilizar la extrusión relativa en lugar de la extrusión absoluta. El uso de pasos de extrusión relativos permite un procesamiento posterior más sencillo del GCode. Sin embargo, no es compatible con todas las impresoras y puede causar ligeras desviaciones en la cantidad de material depositado si se compara con los pasos de extrusión absolutos. Con independencia de este ajuste, el modo de extrusión se ajustará siempre en absoluto antes de la salida de cualquier secuencia GCode." #: fdmprinter.def.json msgctxt "experimental label" @@ -4186,12 +4180,12 @@ msgstr "Experimental" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" -msgstr "" +msgstr "Optimizar el orden de impresión de paredes" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order description" msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization." -msgstr "" +msgstr "Optimizar el orden en el que se imprimen las paredes a fin de reducir el número de retracciones y la distancia recorrida. La mayoría de los componentes se beneficiarán si este ajuste está habilitado pero, en algunos casos, se puede tardar más, por lo que deben compararse las previsiones de tiempo de impresión con y sin optimización." #: fdmprinter.def.json msgctxt "draft_shield_enabled label" @@ -4316,22 +4310,22 @@ msgstr "Alterna la dirección en la que se imprimen las capas superiores/inferio #: fdmprinter.def.json msgctxt "cross_infill_pocket_size label" msgid "Cross 3D Pocket Size" -msgstr "" +msgstr "Tamaño de las bolsas 3D en cruces" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size description" msgid "The size of pockets at four-way crossings in the cross 3D pattern at heights where the pattern is touching itself." -msgstr "" +msgstr "Tamaño de las bolsas en cruces del patrón de cruz 3D en las alturas en las que el patrón coincide consigo mismo." #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly label" msgid "Alternate Cross 3D Pockets" -msgstr "" +msgstr "Alternar bolsas 3D en cruz" #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly description" msgid "Only apply pockets at half of the four-way crossings in the cross 3D pattern and alternate the location of the pockets between heights where the pattern is touching itself." -msgstr "" +msgstr "Solo se aplica a mitad de los cruces en patrones de cruz 3D y alterna la ubicación de las bolsas entre las alturas a las que el patrón coincide consigo mismo." #: fdmprinter.def.json msgctxt "spaghetti_infill_enabled label" @@ -4633,9 +4627,7 @@ msgctxt "wireframe_up_half_speed description" msgid "" "Distance of an upward move which is extruded with half speed.\n" "This can cause better adhesion to previous layers, while not heating the material in those layers too much. Only applies to Wire Printing." -msgstr "" -"Distancia de un movimiento ascendente que se extrude a media velocidad.\n" -"Esto puede causar una mejor adherencia a las capas anteriores, aunque no calienta demasiado el material en esas capas. Solo se aplica a la impresión de alambre." +msgstr "Distancia de un movimiento ascendente que se extrude a media velocidad.\nEsto puede causar una mejor adherencia a las capas anteriores, aunque no calienta demasiado el material en esas capas. Solo se aplica a la impresión de alambre." #: fdmprinter.def.json msgctxt "wireframe_top_jump label" @@ -4755,12 +4747,12 @@ msgstr "Pasar por la superficie superior una vez más, pero sin extruir material #: fdmprinter.def.json msgctxt "ironing_only_highest_layer label" msgid "Iron Only Highest Layer" -msgstr "" +msgstr "Planchar solo la capa superior" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer description" msgid "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish." -msgstr "" +msgstr "Planchar únicamente la última capa de la malla. De este modo se ahorra tiempo si las capas inferiores no requieren un acabado superficial suave." #: fdmprinter.def.json msgctxt "ironing_pattern label" @@ -5124,4 +5116,4 @@ msgstr "Matriz de transformación que se aplicará al modelo cuando se cargue de #~ msgctxt "multiple_mesh_overlap label" #~ msgid "Dual Extrusion Overlap" -#~ msgstr "Superposición de extrusión doble" +#~ msgstr "Superposición de extrusión doble" \ No newline at end of file diff --git a/resources/i18n/fi_FI/cura.po b/resources/i18n/fi_FI/cura.po index 06979a8d4f..74788a4c3f 100644 --- a/resources/i18n/fi_FI/cura.po +++ b/resources/i18n/fi_FI/cura.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:30+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: Finnish\n" "Language: fi_FI\n" @@ -24,7 +24,7 @@ msgstr "Laitteen asetukset" #: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" -msgstr "" +msgstr "Kerrosnäkymä" #: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" @@ -39,17 +39,17 @@ msgstr "GCode-tiedosto" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:65 msgctxt "@action:button" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Tulostus Doodle3D WiFi-Boxin avulla" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:66 msgctxt "@properties:tooltip" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Tulostus Doodle3D WiFi-Boxin avulla" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:86 msgctxt "@info:status" msgid "Connecting to Doodle3D Connect" -msgstr "" +msgstr "Yhteyden muodostaminen Doodle3D Connectiin" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:87 #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:155 @@ -73,32 +73,32 @@ msgstr "Peruuta" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:154 msgctxt "@info:status" msgid "Sending data to Doodle3D Connect" -msgstr "" +msgstr "Lähetetään tietoja Doodle3D Connectiin" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:161 msgctxt "@info:status" msgid "Unable to send data to Doodle3D Connect. Is another job still active?" -msgstr "" +msgstr "Tietojen lähetys Doodle3D Connectiin ei onnistu. Onko toinen työ yhä aktiivinen?" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:175 msgctxt "@info:status" msgid "Storing data on Doodle3D Connect" -msgstr "" +msgstr "Tietoja tallennetaan Doodle3D Connectiin" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:213 msgctxt "@info:status" msgid "File sent to Doodle3D Connect" -msgstr "" +msgstr "Tiedosto lähetetty Doodle3D Connectiin" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@action:button" msgid "Open Connect.." -msgstr "" +msgstr "Avaa Connect..." #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@info:tooltip" msgid "Open the Doodle3D Connect web interface" -msgstr "" +msgstr "Avaa Doodle3D Connect -verkkoliittymä" #: /home/ruben/Projects/Cura/plugins/ChangeLogPlugin/ChangeLog.py:35 msgctxt "@item:inmenu" @@ -143,7 +143,7 @@ msgstr "Uuden työn aloittaminen ei onnistu, koska tulostin on varattu tai sitä #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:153 msgctxt "@info:title" msgid "Print Details" -msgstr "" +msgstr "Tulostustiedot" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:status" @@ -153,7 +153,7 @@ msgstr "Tämä tulostin ei tue USB-tulostusta, koska se käyttää UltiGCode-tyy #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:title" msgid "USB Printing" -msgstr "" +msgstr "USB-tulostus" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:460 msgctxt "@info:status" @@ -168,7 +168,7 @@ msgstr "Uuden työn aloittaminen ei onnistu, koska tulostin ei tue USB-tulostust #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1296 msgctxt "@info:title" msgid "Warning" -msgstr "" +msgstr "Varoitus" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:108 msgctxt "@info" @@ -184,7 +184,7 @@ msgstr "Tulostimelle ei löydetty laiteohjelmistoa (%s)." #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:122 msgctxt "@info:title" msgid "Printer Firmware" -msgstr "" +msgstr "Tulostimen laiteohjelmisto" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." @@ -201,25 +201,25 @@ msgstr "Tallenna siirrettävälle asemalle {0}" #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" -msgstr "" +msgstr "Tallennetaan siirrettävälle asemalle {0}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:89 msgctxt "@info:title" msgid "Saving" -msgstr "" +msgstr "Tallennetaan" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:99 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:102 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" -msgstr "" +msgstr "Ei voitu tallentaa tiedostoon {0}: {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:118 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." -msgstr "" +msgstr "Ei löydetty tiedostonimeä yritettäessä kirjoittaa laitteeseen {device}." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:131 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146 @@ -236,7 +236,7 @@ msgstr "Ei voitu tallentaa siirrettävälle asemalle {0}: {1}" #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1305 msgctxt "@info:title" msgid "Error" -msgstr "" +msgstr "Virhe" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 #, python-brace-format @@ -247,7 +247,7 @@ msgstr "Tallennettu siirrettävälle asemalle {0} nimellä {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 msgctxt "@info:title" msgid "File Saved" -msgstr "" +msgstr "Tiedosto tallennettu" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 msgctxt "@action:button" @@ -269,7 +269,7 @@ msgstr "Poistettu {0}. Voit nyt poistaa aseman turvallisesti." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:156 msgctxt "@info:title" msgid "Safely Remove Hardware" -msgstr "" +msgstr "Poista laite turvallisesti" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:158 #, python-brace-format @@ -304,7 +304,7 @@ msgstr "Tulostimen käyttöoikeutta pyydetty. Hyväksy tulostimen pyyntö" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:157 msgctxt "@info:title" msgid "Connection status" -msgstr "" +msgstr "Yhteyden tila" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:158 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:158 @@ -319,7 +319,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:500 msgctxt "@info:title" msgid "Connection Status" -msgstr "" +msgstr "Yhteyden tila" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:159 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:159 @@ -417,7 +417,7 @@ msgstr "Uuden tulostustyön aloittaminen ei onnistu, koska tulostin on varattu. #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:650 msgctxt "@info:title" msgid "Printer Status" -msgstr "" +msgstr "Tulostimen tila" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:674 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:660 @@ -488,7 +488,7 @@ msgstr "Lähetetään tietoja tulostimeen" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:839 msgctxt "@info:title" msgid "Sending Data" -msgstr "" +msgstr "Lähetetään tietoja" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:908 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:890 @@ -547,73 +547,73 @@ msgstr "Yhdistä verkon kautta" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:103 msgid "This printer is not set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Tätä tulostinta ei ole määritetty yhdistetyn Ultimaker 3 -tulostinryhmän isännäksi." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:104 #, python-brace-format msgctxt "Count is number of printers." msgid "This printer is the host for a group of {count} connected Ultimaker 3 printers." -msgstr "" +msgstr "Tämä tulostin on {count} tulostimen yhdistetyn Ultimaker 3 -ryhmän isäntä." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:105 #, python-brace-format msgid "{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate." -msgstr "" +msgstr "{printer_name} on tulostanut työn {job_name}. Nouda työ ja vahvista alustan tyhjennys." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:106 #, python-brace-format msgid "{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing." -msgstr "" +msgstr "{printer_name} on varattu työn {job_name} tulostamiseen. Muuta tulostimen määritys vastaamaan työtä, jotta tulostus alkaa." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:196 msgctxt "@info:status" msgid "Sending new jobs (temporarily) blocked, still sending the previous print job." -msgstr "" +msgstr "Uusien töiden lähettäminen (tilapäisesti) estetty, edellistä tulostustyötä lähetetään vielä." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:212 msgctxt "@info:status" msgid "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Uuden tulostustyön lähetys ei onnistu: tätä 3D-tulostinta ei ole (vielä) määritetty yhdistetyn Ultimaker 3 -tulostinryhmän isännäksi." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:425 #, python-brace-format msgctxt "@info:progress" msgid "Sending {file_name} to group {cluster_name}" -msgstr "" +msgstr "Lähetetään tiedostoa {file_name} ryhmään {cluster_name}" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:498 #, python-brace-format msgctxt "@info:status" msgid "Sent {file_name} to group {cluster_name}." -msgstr "" +msgstr "Lähetettiin {file_name} ryhmään {cluster_name}." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:503 msgctxt "@action:button" msgid "Show print jobs" -msgstr "" +msgstr "Näytä tulostustyöt" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:504 msgctxt "@info:tooltip" msgid "Opens the print jobs interface in your browser." -msgstr "" +msgstr "Avaa tulostustöiden käyttöliittymän selaimessa." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:520 #, python-brace-format msgctxt "@info:status" msgid "Unable to send print job to group {cluster_name}." -msgstr "" +msgstr "Tulostustyön lähetys ryhmään {cluster_name} ei onnistu." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:71 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "To ensure that your {machine_name} is equipped with the latest features it is recommended to update the firmware regularly. This can be done on the {machine_name} (when connected to the network) or via USB." -msgstr "" +msgstr "On suositeltavaa päivittää laiteohjelmisto säännöllisesti, jotta voidaan varmistaa, että laitteessa {machine_name} on viimeisimmät ominaisuudet. Tämä voidaan tehdä laitteessa {machine_name} (verkkoon yhdistettynä) tai USB:n kautta." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:72 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s firmware available" -msgstr "" +msgstr "Uusi tulostimen %s laiteohjelmisto saatavilla" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:73 #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:149 @@ -624,7 +624,7 @@ msgstr "Lataa" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:83 msgctxt "@info" msgid "Could not access update information." -msgstr "" +msgstr "Päivitystietoja ei löytynyt." #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:199 msgctxt "@info:status" @@ -663,7 +663,7 @@ msgstr "Cura kerää anonyymejä viipalointiin liittyviä tilastotietoja. Tämä #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:46 msgctxt "@info:title" msgid "Collecting Data" -msgstr "" +msgstr "Kerätään tietoja" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:48 msgctxt "@action:button" @@ -684,7 +684,7 @@ msgstr "GCode-tiedosto" #: /home/ruben/Projects/Cura/plugins/LayerView/__init__.py:13 msgctxt "@item:inlistbox" msgid "Layer view" -msgstr "" +msgstr "Kerrosnäkymä" #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:93 msgctxt "@info:status" @@ -694,7 +694,7 @@ msgstr "Cura ei näytä kerroksia täsmällisesti, kun rautalankatulostus on kä #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:94 msgctxt "@info:title" msgid "Layer View" -msgstr "" +msgstr "Kerrosnäkymä" #: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" @@ -724,7 +724,7 @@ msgstr "GIF-kuva" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." -msgstr "" +msgstr "Viipalointi ei onnistu nykyisellä materiaalilla, sillä se ei sovellu käytettäväksi valitun laitteen tai kokoonpanon kanssa." #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:297 @@ -732,7 +732,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:316 msgctxt "@info:title" msgid "Unable to slice" -msgstr "" +msgstr "Viipalointi ei onnistu" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:296 #, python-brace-format @@ -759,7 +759,7 @@ msgstr "Käsitellään kerroksia" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:238 msgctxt "@info:title" msgid "Information" -msgstr "" +msgstr "Tiedot" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" @@ -798,18 +798,18 @@ msgstr "Suutin" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:28 msgctxt "@menuitem" msgid "Browse plugins" -msgstr "" +msgstr "Selaa lisäosia" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:163 #, python-brace-format msgctxt "@info:status" msgid "Failed to get plugin ID from {0}" -msgstr "" +msgstr "Lisäosan tunnuksen hankkiminen epäonnistui tiedostosta {0}" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:164 msgctxt "@info:tile" msgid "Warning" -msgstr "" +msgstr "Varoitus" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:202 msgctxt "@window:title" @@ -819,7 +819,7 @@ msgstr "Lisäosien selain" #: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" -msgstr "" +msgstr "Kiinteä näkymä" #: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" @@ -835,7 +835,7 @@ msgstr "G-coden jäsennys" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:370 msgctxt "@info:title" msgid "G-code Details" -msgstr "" +msgstr "G-coden tiedot" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:368 msgctxt "@info:generic" @@ -917,7 +917,7 @@ msgstr "Tuki" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:95 msgctxt "@tooltip" msgid "Skirt" -msgstr "" +msgstr "Helma" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:96 msgctxt "@tooltip" @@ -958,7 +958,7 @@ msgstr "Uusien paikkojen etsiminen kappaleille" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:34 msgctxt "@info:title" msgid "Finding Location" -msgstr "" +msgstr "Etsitään paikkaa" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:89 #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 @@ -969,7 +969,7 @@ msgstr "Kaikille kappaleille ei löydy paikkaa tulostustilavuudessa." #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:90 msgctxt "@info:title" msgid "Can't Find Location" -msgstr "" +msgstr "Paikkaa ei löydy" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:431 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:112 @@ -982,7 +982,7 @@ msgstr "Tiedosto on jo olemassa" #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" -msgstr "" +msgstr "Tiedosto {0} on jo olemassa. Haluatko varmasti kirjoittaa sen päälle?" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:815 msgctxt "@label" @@ -1003,7 +1003,7 @@ msgstr "Valittu materiaali ei sovellu käytettäväksi valitun laitteen tai koko #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:title" msgid "Incompatible Material" -msgstr "" +msgstr "Yhteensopimaton materiaali" #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:status Has a cancel button next to it." @@ -1024,24 +1024,24 @@ msgstr "Kumoa materiaalin halkaisijan muutokset." #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" -msgstr "" +msgstr "Profiilin vienti epäonnistui tiedostoon {0}: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:150 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." -msgstr "" +msgstr "Profiilin vienti epäonnistui tiedostoon {0}: Kirjoitin-lisäosa ilmoitti virheestä." #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:155 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" -msgstr "" +msgstr "Profiili viety tiedostoon {0}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 msgctxt "@info:title" msgid "Export Details" -msgstr "" +msgstr "Viennin tiedot" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:182 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:204 @@ -1050,7 +1050,7 @@ msgstr "" #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to import profile from {0}: {1}" -msgstr "" +msgstr "Profiilin tuonti epäonnistui tiedostosta {0}: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:215 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:251 @@ -1089,7 +1089,7 @@ msgstr "Tulostustilavuuden korkeutta on vähennetty tulostusjärjestysasetuksen #: /home/ruben/Projects/Cura/cura/BuildVolume.py:102 msgctxt "@info:title" msgid "Build Volume" -msgstr "" +msgstr "Tulostustilavuus" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:34 msgctxt "@info:status" @@ -1100,7 +1100,7 @@ msgstr "Kappaleiden kertominen ja sijoittelu" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 msgctxt "@info:title" msgid "Placing Object" -msgstr "" +msgstr "Sijoitetaan kappaletta" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:54 msgctxt "@title:window" @@ -1113,10 +1113,7 @@ msgid "" "

A fatal exception has occurred that we could not recover from!

\n" "

Please use the information below to post a bug report at http://github.com/Ultimaker/Cura/issues

\n" " " -msgstr "" -"

Tapahtui vakava poikkeus, josta palautuminen ei onnistunut!

\n" -"

Tee virheraportti alla olevien tietojen perusteella osoitteessa http://github.com/Ultimaker/Cura/issues

\n" -" " +msgstr "

Tapahtui vakava poikkeus, josta palautuminen ei onnistunut!

\n

Tee virheraportti alla olevien tietojen perusteella osoitteessa http://github.com/Ultimaker/Cura/issues

\n " #: /home/ruben/Projects/Cura/cura/CrashHandler.py:112 msgctxt "@action:button" @@ -1418,10 +1415,7 @@ msgid "" "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n" "\n" "Select your printer from the list below:" -msgstr "" -"Tulosta suoraan tulostimeen verkon kautta yhdistämällä tulostin verkkoon verkkokaapelilla tai yhdistämällä tulostin Wi-Fi-verkkoon. Jos Curaa ei yhdistetä tulostimeen, GCode-tiedostot voidaan silti siirtää tulostimeen USB-aseman avulla.\n" -"\n" -"Valitse tulostin alla olevasta luettelosta:" +msgstr "Tulosta suoraan tulostimeen verkon kautta yhdistämällä tulostin verkkoon verkkokaapelilla tai yhdistämällä tulostin Wi-Fi-verkkoon. Jos Curaa ei yhdistetä tulostimeen, GCode-tiedostot voidaan silti siirtää tulostimeen USB-aseman avulla.\n\nValitse tulostin alla olevasta luettelosta:" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:75 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:75 @@ -1547,17 +1541,17 @@ msgstr "Aktivoi määritys" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:284 msgctxt "@label" msgid "This printer is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "Tätä tulostinta ei ole määritetty yhdistetyn Ultimaker 3 -tulostinryhmän isännäksi" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:287 msgctxt "@label" msgid "This printer is the host for a group of %1 connected Ultimaker 3 printers" -msgstr "" +msgstr "Tämä tulostin on %1 tulostimen yhdistetyn Ultimaker 3 -ryhmän isäntä" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:24 msgctxt "@title:window" msgid "Print over network" -msgstr "" +msgstr "Tulosta verkon kautta" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:92 msgctxt "@action:button" @@ -1567,98 +1561,98 @@ msgstr "Tulosta" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:50 msgctxt "@label: arg 1 is group name" msgid "%1 is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "%1 ei ole määritetty yhdistetyn Ultimaker 3 -tulostinryhmän isännäksi" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:311 msgctxt "@label:status" msgid "Printing" -msgstr "" +msgstr "Tulostetaan" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:315 msgctxt "@label:status" msgid "Reserved" -msgstr "" +msgstr "Varattu" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:317 msgctxt "@label:status" msgid "Finished" -msgstr "" +msgstr "Valmis" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:320 msgctxt "@label:status" msgid "Preparing" -msgstr "" +msgstr "Valmistellaan" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:327 msgctxt "@label:status" msgid "Available" -msgstr "" +msgstr "Saatavilla" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:367 msgctxt "@label" msgid "Completed on: " -msgstr "" +msgstr "Valmistunut: " #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:371 msgctxt "@label" msgid "Clear build plate" -msgstr "" +msgstr "Tyhjennä alusta" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:375 msgctxt "@label" msgid "Preparing to print" -msgstr "" +msgstr "Valmistellaan tulostusta" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:379 msgctxt "@label" msgid "Not accepting print jobs" -msgstr "" +msgstr "Ei hyväksy tulostustöitä" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:14 msgctxt "@info:tooltip" msgid "Opens the print jobs page with your default web browser." -msgstr "" +msgstr "Avaa tulostöiden sivun oletusselaimessa." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:15 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:154 msgctxt "@action:button" msgid "View print jobs" -msgstr "" +msgstr "Näytä tulostustyöt" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:36 msgctxt "@label" msgid "PRINTER GROUP" -msgstr "" +msgstr "TULOSTINRYHMÄ" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:69 msgctxt "@title" msgid "Print jobs" -msgstr "" +msgstr "Tulostustyöt" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:100 msgctxt "@label" msgid "Printing" -msgstr "" +msgstr "Tulostetaan" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:118 msgctxt "@label" msgid "Queued" -msgstr "" +msgstr "Jonossa" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:135 msgctxt "@label" msgid "Waiting for configuration change" -msgstr "" +msgstr "Odotetaan määrityksen muutosta" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:194 msgctxt "@label:title" msgid "Printers" -msgstr "" +msgstr "Tulostimet" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:247 msgctxt "@action:button" msgid "View printers" -msgstr "" +msgstr "Näytä tulostimet" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/ConfigDialog.qml:20 msgctxt "@title:window" @@ -2049,7 +2043,7 @@ msgstr "Asennettu" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:199 msgctxt "@title:window" msgid "Plugin License Agreement" -msgstr "" +msgstr "Lisäosan lisenssisopimus" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:220 msgctxt "@label" @@ -2057,17 +2051,17 @@ msgid "" " plugin contains a license.\n" "You need to accept this license to install this plugin.\n" "Do you agree with the terms below?" -msgstr "" +msgstr " lisäosa sisältää lisenssin.\nLisenssi on hyväksyttävä lisäosan asentamista varten.\nHyväksytkö alla olevat ehdot?" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:242 msgctxt "@action:button" msgid "Accept" -msgstr "" +msgstr "Hyväksy" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:253 msgctxt "@action:button" msgid "Decline" -msgstr "" +msgstr "Hylkää" #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml:25 #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:25 @@ -2322,9 +2316,7 @@ msgctxt "@text:window" msgid "" "You have customized some profile settings.\n" "Would you like to keep or discard those settings?" -msgstr "" -"Olet mukauttanut profiilin asetuksia.\n" -"Haluatko säilyttää vai hylätä nämä asetukset?" +msgstr "Olet mukauttanut profiilin asetuksia.\nHaluatko säilyttää vai hylätä nämä asetukset?" #: /home/ruben/Projects/Cura/resources/qml/DiscardOrKeepProfileChangesDialog.qml:110 msgctxt "@title:column" @@ -2908,12 +2900,12 @@ msgstr "Tuo materiaali" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:320 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" -msgstr "" +msgstr "Materiaalin tuominen epäonnistui: %1: %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:324 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" -msgstr "" +msgstr "Materiaalin tuominen onnistui: %1" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:343 #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:358 @@ -2924,12 +2916,12 @@ msgstr "Vie materiaali" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:362 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" -msgstr "" +msgstr "Materiaalin vieminen epäonnistui kohteeseen %1: %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:368 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" -msgstr "" +msgstr "Materiaalin vieminen onnistui kohteeseen %1" #: /home/ruben/Projects/Cura/resources/qml/AddMachineDialog.qml:18 #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:766 @@ -2962,9 +2954,7 @@ msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" -msgstr "" -"Cura-ohjelman on kehittänyt Ultimaker B.V. yhteistyössä käyttäjäyhteisön kanssa.\n" -"Cura hyödyntää seuraavia avoimeen lähdekoodiin perustuvia projekteja:" +msgstr "Cura-ohjelman on kehittänyt Ultimaker B.V. yhteistyössä käyttäjäyhteisön kanssa.\nCura hyödyntää seuraavia avoimeen lähdekoodiin perustuvia projekteja:" #: /home/ruben/Projects/Cura/resources/qml/AboutDialog.qml:118 msgctxt "@label" @@ -3067,10 +3057,7 @@ msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." -msgstr "" -"Jotkut asetusten ja ohitusten arvot eroavat profiiliin tallennetuista arvoista.\n" -"\n" -"Avaa profiilin hallinta napsauttamalla." +msgstr "Jotkut asetusten ja ohitusten arvot eroavat profiiliin tallennetuista arvoista.\n\nAvaa profiilin hallinta napsauttamalla." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:145 msgctxt "@label:textbox" @@ -3108,10 +3095,7 @@ msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." -msgstr "" -"Jotkin piilotetut asetukset käyttävät arvoja, jotka eroavat normaaleista lasketuista arvoista.\n" -"\n" -"Tee asetuksista näkyviä napsauttamalla." +msgstr "Jotkin piilotetut asetukset käyttävät arvoja, jotka eroavat normaaleista lasketuista arvoista.\n\nTee asetuksista näkyviä napsauttamalla." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:62 msgctxt "@label Header for list of settings." @@ -3139,10 +3123,7 @@ msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." -msgstr "" -"Tämän asetuksen arvo eroaa profiilin arvosta.\n" -"\n" -"Palauta profiilin arvo napsauttamalla." +msgstr "Tämän asetuksen arvo eroaa profiilin arvosta.\n\nPalauta profiilin arvo napsauttamalla." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:284 msgctxt "@label" @@ -3150,10 +3131,7 @@ msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." -msgstr "" -"Tämä asetus on normaalisti laskettu, mutta sillä on tällä hetkellä absoluuttinen arvo.\n" -"\n" -"Palauta laskettu arvo napsauttamalla." +msgstr "Tämä asetus on normaalisti laskettu, mutta sillä on tällä hetkellä absoluuttinen arvo.\n\nPalauta laskettu arvo napsauttamalla." #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:118 msgctxt "@label:listbox" @@ -3165,9 +3143,7 @@ msgctxt "@label:listbox" msgid "" "Print Setup disabled\n" "G-code files cannot be modified" -msgstr "" -"Tulostuksen asennus ei käytössä\n" -"G-code-tiedostoja ei voida muokata" +msgstr "Tulostuksen asennus ei käytössä\nG-code-tiedostoja ei voida muokata" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:326 msgctxt "@label" @@ -3177,22 +3153,22 @@ msgstr "00 h 00 min" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:344 msgctxt "@tooltip" msgid "Time information" -msgstr "" +msgstr "Aikatiedot" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:370 msgctxt "@description" msgid "Print time" -msgstr "" +msgstr "Tulostusaika" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:409 msgctxt "@label" msgid "%1m / ~ %2g / ~ %4 %3" -msgstr "" +msgstr "%1 m / ~ %2 g / ~ %4 %3" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:414 msgctxt "@label" msgid "%1m / ~ %2g" -msgstr "" +msgstr "%1 m / ~ %2 g" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:476 msgctxt "@tooltip" @@ -3252,12 +3228,12 @@ msgstr "Ei tulostinta yhdistettynä" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:157 msgctxt "@label" msgid "Extruder" -msgstr "" +msgstr "Suulake" #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:120 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." -msgstr "" +msgstr "Kuuman pään kohdelämpötila. Kuuma pää lämpenee tai viilenee kohti tätä lämpötilaa. Jos asetus on 0, kuuman pään lämmitys sammutetaan." #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:152 msgctxt "@tooltip" @@ -3726,27 +3702,27 @@ msgstr "Valmistele" #: /home/ruben/Projects/Cura/resources/qml/Topbar.qml:79 msgctxt "@title:tab" msgid "Monitor" -msgstr "" +msgstr "Valvo" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:50 msgctxt "@label" msgid "Layer Height" -msgstr "" +msgstr "Kerroksen korkeus" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:62 msgctxt "@label" msgid "Print Speed" -msgstr "" +msgstr "Tulostusnopeus" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:73 msgctxt "@label" msgid "Slower" -msgstr "" +msgstr "Hitaammin" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:85 msgctxt "@label" msgid "Faster" -msgstr "" +msgstr "Nopeammin" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:416 msgctxt "@label" @@ -3761,7 +3737,7 @@ msgstr "Asteittainen täyttö lisää täytön tiheyttä vähitellen yläosaa ko #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:602 msgctxt "@label" msgid "Enable gradual" -msgstr "" +msgstr "Ota asteittainen käyttöön" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:668 msgctxt "@label" @@ -3838,7 +3814,7 @@ msgstr "Materiaali" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:374 msgctxt "@label" msgid "Check material compatibility" -msgstr "" +msgstr "Tarkista materiaalin yhteensopivuus" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:394 msgctxt "@tooltip" @@ -3898,12 +3874,12 @@ msgstr "Jumala-tila" #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box." -msgstr "" +msgstr "Hyväksyy GCode-määrittelyt ja lähettää ne Wi-Fi-yhteyden kautta Doodle3D WiFi-Boxiin." #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "name" msgid "Doodle3D WiFi-Box" -msgstr "" +msgstr "Doodle3D WiFi-Box" #: ChangeLogPlugin/plugin.json msgctxt "description" @@ -3958,17 +3934,17 @@ msgstr "UM3-verkkoyhteys" #: CuraPrintClusterUpload/plugin.json msgctxt "name" msgid "UM3 Network Connection (Cluster)" -msgstr "" +msgstr "UM3-verkkoyhteys (klusteri)" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." -msgstr "" +msgstr "Tarkistaa laiteohjelmistopäivitykset." #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" -msgstr "" +msgstr "Laiteohjelmiston päivitysten tarkistus" #: CuraSolidWorksPlugin/plugin.json msgctxt "description" @@ -4063,12 +4039,12 @@ msgstr "Päivitys versiosta 2.5 versioon 2.6" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." -msgstr "" +msgstr "Päivittää kokoonpanon versiosta Cura 2.7 versioon Cura 3.0." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" -msgstr "" +msgstr "Päivitys versiosta 2.7 versioon 3.0" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" @@ -4973,4 +4949,4 @@ msgstr "Cura-profiilin lukija" #~ msgctxt "@label:" #~ msgid "Print Again" -#~ msgstr "Tulosta uudelleen" +#~ msgstr "Tulosta uudelleen" \ No newline at end of file diff --git a/resources/i18n/fi_FI/fdmprinter.def.json.po b/resources/i18n/fi_FI/fdmprinter.def.json.po index c2277a7d66..fb73e2e39d 100644 --- a/resources/i18n/fi_FI/fdmprinter.def.json.po +++ b/resources/i18n/fi_FI/fdmprinter.def.json.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:31+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: Finnish\n" "Language: fi_FI\n" @@ -56,9 +56,7 @@ msgctxt "machine_start_gcode description" msgid "" "Gcode commands to be executed at the very start - separated by \n" "." -msgstr "" -"GCode-komennot, jotka suoritetaan aivan alussa – eroteltuina merkillä \n" -"." +msgstr "GCode-komennot, jotka suoritetaan aivan alussa – eroteltuina merkillä \n." #: fdmprinter.def.json msgctxt "machine_end_gcode label" @@ -70,9 +68,7 @@ msgctxt "machine_end_gcode description" msgid "" "Gcode commands to be executed at the very end - separated by \n" "." -msgstr "" -"GCode-komennot, jotka suoritetaan aivan lopussa – eroteltuina merkillä \n" -"." +msgstr "GCode-komennot, jotka suoritetaan aivan lopussa – eroteltuina merkillä \n." #: fdmprinter.def.json msgctxt "material_guid label" @@ -1122,7 +1118,7 @@ msgstr "Satunnainen" #: fdmprinter.def.json msgctxt "z_seam_type option sharpest_corner" msgid "Sharpest Corner" -msgstr "" +msgstr "Terävin kulma" #: fdmprinter.def.json msgctxt "z_seam_x label" @@ -1147,32 +1143,32 @@ msgstr "Y-koordinaatti kohdalle, jonka läheltä aloitetaan kunkin kerroksen osu #: fdmprinter.def.json msgctxt "z_seam_corner label" msgid "Seam Corner Preference" -msgstr "" +msgstr "Saumakulmien asetus" #: fdmprinter.def.json msgctxt "z_seam_corner description" msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner." -msgstr "" +msgstr "Määritä, vaikuttavatko mallin ulkolinjan kulmat sauman sijaintiin. Ei mitään tarkoittaa, että kulmilla ei ole vaikutusta sauman sijaintiin. Piilota sauma -valinnalla sauman sijainti sisäkulmassa on todennäköisempää. Paljasta sauma -valinnalla sauman sijainti ulkokulmassa on todennäköisempää. Piilota tai paljasta sauma -valinnalla sauman sijainti sisä- tai ulkokulmassa on todennäköisempää." #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_none" msgid "None" -msgstr "" +msgstr "Ei mitään" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_inner" msgid "Hide Seam" -msgstr "" +msgstr "Piilota sauma" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" -msgstr "" +msgstr "Paljasta sauma" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_any" msgid "Hide or Expose Seam" -msgstr "" +msgstr "Piilota tai paljasta sauma" #: fdmprinter.def.json msgctxt "z_seam_relative label" @@ -1252,7 +1248,7 @@ msgstr "Täyttökuvio" #: fdmprinter.def.json msgctxt "infill_pattern description" msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, cubic, octet, quarter cubic and concentric patterns are fully printed every layer. Cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction." -msgstr "" +msgstr "Tulostettava täyttömateriaalin kuvio. Linja- ja siksak-täytöt vaihtavat suuntaa kerrosten välillä, mikä vähentää materiaalikustannuksia. Ristikko-, kolmio-, kuutio-, oktetti-, neljänneskuutio- ja samankeskinen-kuviot tulostetaan kokonaisuudessaan kuhunkin kerrokseen. Kuutio-, neljänneskuutio- ja oktettitäytöt muuttuvat kerroksittain, jotta vahvuus jakautuu tasaisemmin kussakin suunnassa." #: fdmprinter.def.json msgctxt "infill_pattern option grid" @@ -1282,12 +1278,12 @@ msgstr "Kuution alajako" #: fdmprinter.def.json msgctxt "infill_pattern option tetrahedral" msgid "Octet" -msgstr "" +msgstr "Oktetti" #: fdmprinter.def.json msgctxt "infill_pattern option quarter_cubic" msgid "Quarter Cubic" -msgstr "" +msgstr "Neljänneskuutio" #: fdmprinter.def.json msgctxt "infill_pattern option concentric" @@ -1307,22 +1303,22 @@ msgstr "Siksak" #: fdmprinter.def.json msgctxt "infill_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Risti" #: fdmprinter.def.json msgctxt "infill_pattern option cross_3d" msgid "Cross 3D" -msgstr "" +msgstr "Risti 3D" #: fdmprinter.def.json msgctxt "zig_zaggify_infill label" msgid "Connect Infill Lines" -msgstr "" +msgstr "Yhdistä täyttölinjat" #: fdmprinter.def.json msgctxt "zig_zaggify_infill description" msgid "Connect the ends where the infill pattern meets the inner wall using a lines which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduces the effects on infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used." -msgstr "" +msgstr "Yhdistä päät, joissa täyttökuvio kohtaa sisäseinämän käyttämällä linjoja, jotka seuraavat sisäseinämän muotoa. Tämän asetuksen ottaminen käyttöön voi saada täytön tarttumaan seinämiin paremmin ja vähentää täytön vaikutusta pystypintojen laatuun. Tämän asetuksen poistaminen käytöstä vähentää käytettävän materiaalin määrää." #: fdmprinter.def.json msgctxt "infill_angles label" @@ -1447,32 +1443,32 @@ msgstr "Älä muodosta tätä pienempiä täyttöalueita (käytä sen sijaan pin #: fdmprinter.def.json msgctxt "skin_preshrink label" msgid "Skin Removal Width" -msgstr "" +msgstr "Pintakalvon poistoleveys" #: fdmprinter.def.json msgctxt "skin_preshrink description" msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "Suurin poistettavien pintakalvoalueiden leveys. Kaikki tätä arvoa pienemmät pintakalvoalueet poistuvat. Tästä voi olla apua mallin kaltevien pintojen ylä-/alapintakalvon tulostukseen käytettävän ajan ja materiaalin rajoittamisessa." #: fdmprinter.def.json msgctxt "top_skin_preshrink label" msgid "Top Skin Removal Width" -msgstr "" +msgstr "Yläpintakalvon poistoleveys" #: fdmprinter.def.json msgctxt "top_skin_preshrink description" msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model." -msgstr "" +msgstr "Suurin poistettavien yläpintakalvoalueiden leveys. Kaikki tätä arvoa pienemmät pintakalvoalueet poistuvat. Tästä voi olla apua mallin kaltevien pintojen yläpintakalvon tulostukseen käytettävän ajan ja materiaalin rajoittamisessa." #: fdmprinter.def.json msgctxt "bottom_skin_preshrink label" msgid "Bottom Skin Removal Width" -msgstr "" +msgstr "Alapintakalvon poistoleveys" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink description" msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "Suurin poistettavien alapintakalvoalueiden leveys. Kaikki tätä arvoa pienemmät pintakalvoalueet poistuvat. Tästä voi olla apua mallin kaltevien pintojen alapintakalvon tulostukseen käytettävän ajan ja materiaalin rajoittamisessa." #: fdmprinter.def.json msgctxt "expand_skins_expand_distance label" @@ -1482,27 +1478,27 @@ msgstr "Pintakalvon laajennuksen etäisyys" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance description" msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "Etäisyys, jonka verran pintakalvot laajentuvat täyttöön. Suuremmat arvot saavat pintakalvon kiinnittymään paremmin täyttökuvioon ja viereisten kerrosten seinämät tarttumaan paremmin pintakalvoon. Pienemmät arvot vähentävät käytettävän materiaalin määrää." #: fdmprinter.def.json msgctxt "top_skin_expand_distance label" msgid "Top Skin Expand Distance" -msgstr "" +msgstr "Yläpintakalvon laajennuksen etäisyys" #: fdmprinter.def.json msgctxt "top_skin_expand_distance description" msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "Etäisyys, jonka verran yläpintakalvot laajentuvat täyttöön. Suuremmat arvot saavat pintakalvon kiinnittymään paremmin täyttökuvioon ja yllä olevan kerroksen seinämät tarttumaan paremmin pintakalvoon. Pienemmät arvot vähentävät käytettävän materiaalin määrää." #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance label" msgid "Bottom Skin Expand Distance" -msgstr "" +msgstr "Alapintakalvon laajennuksen etäisyys" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance description" msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used." -msgstr "" +msgstr "Etäisyys, jonka verran alapintakalvot laajentuvat täyttöön. Suuremmat arvot saavat pintakalvon kiinnittymään paremmin täyttökuvioon ja tarttumaan paremmin alla olevan kerroksen seinämiin. Pienemmät arvot vähentävät käytettävän materiaalin määrää." #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion label" @@ -2822,7 +2818,7 @@ msgstr "Siksak" #: fdmprinter.def.json msgctxt "support_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Risti" #: fdmprinter.def.json msgctxt "support_connect_zigzags label" @@ -2837,32 +2833,32 @@ msgstr "Yhdistä siksakit. Tämä lisää siksak-tukirakenteen lujuutta." #: fdmprinter.def.json msgctxt "support_skip_some_zags label" msgid "Break Up Support In Chunks" -msgstr "" +msgstr "Riko tuki lohkoihin" #: fdmprinter.def.json msgctxt "support_skip_some_zags description" msgid "Skip some support line connections to make the support structure easier to break away. This setting is applicable to the Zig Zag support infill pattern." -msgstr "" +msgstr "Ohita jotkin tukilinjojen yhdistämiset, jotta tukirakenne on helpompi rikkoa. Tämä asetus soveltuu siksak-tukitäyttökuvioon." #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm label" msgid "Support Chunk Size" -msgstr "" +msgstr "Tukilohkon koko" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm description" msgid "Leave out a connection between support lines once every N millimeter to make the support structure easier to break away." -msgstr "" +msgstr "Jätä tukilinjojen välinen yhdistäminen pois joka N. millimetri, jotta tukirakenne on helpompi rikkoa." #: fdmprinter.def.json msgctxt "support_zag_skip_count label" msgid "Support Chunk Line Count" -msgstr "" +msgstr "Tukilohkolinjaluku" #: fdmprinter.def.json msgctxt "support_zag_skip_count description" msgid "Skip one in every N connection lines to make the support structure easier to break away." -msgstr "" +msgstr "Ohita joka N. yhdistämislinja, jotta tukirakenne on helpompi rikkoa." #: fdmprinter.def.json msgctxt "support_infill_rate label" @@ -3404,9 +3400,7 @@ msgctxt "skirt_gap description" msgid "" "The horizontal distance between the skirt and the first layer of the print.\n" "This is the minimum distance, multiple skirt lines will extend outwards from this distance." -msgstr "" -"Vaakasuora etäisyys helman ja tulosteen ensimmäisen kerroksen välillä.\n" -"Tämä on minimietäisyys; useampia helmalinjoja käytettäessä ne ulottuvat tämän etäisyyden ulkopuolelle." +msgstr "Vaakasuora etäisyys helman ja tulosteen ensimmäisen kerroksen välillä.\nTämä on minimietäisyys; useampia helmalinjoja käytettäessä ne ulottuvat tämän etäisyyden ulkopuolelle." #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length label" @@ -3451,22 +3445,22 @@ msgstr "Tulostaa reunuksen vain mallin ulkopuolelle. Tämä vähentää myöhemm #: fdmprinter.def.json msgctxt "z_offset_layer_0 label" msgid "Initial Layer Z Offset" -msgstr "" +msgstr "Alkukerroksen Z-siirtymä" #: fdmprinter.def.json msgctxt "z_offset_layer_0 description" msgid "The extruder is offset from the normal height of the first layer by this amount. It can be positive (raised) or negative (lowered). Some filament types adhere to the build plate better if the extruder is raised slightly." -msgstr "" +msgstr "Suulaketta siirretään ensimmäisen kerroksen normaalista korkeudesta tällä määrällä. Se voi olla positiivinen (nostettu) tai negatiivinen (laskettu). Jotkin tulostuslankatyypit tarttuvat alustaan paremmin, jos suulaketta nostetaan hieman." #: fdmprinter.def.json msgctxt "z_offset_taper_layers label" msgid "Z Offset Taper Layers" -msgstr "" +msgstr "Z-siirtymän kapenevat kerrokset" #: fdmprinter.def.json msgctxt "z_offset_taper_layers description" msgid "When non-zero, the Z offset is reduced to 0 over that many layers. A value of 0 means that the Z offset remains constant for all the layers in the print." -msgstr "" +msgstr "Kun tämä ei ole nolla, Z-siirtymä pienenee nollaan niin monen kerroksen matkalla. Kun arvo on 0, Z-siirtymä pysyy vakiona kaikille tulostuksen kerroksille." #: fdmprinter.def.json msgctxt "raft_margin label" @@ -3481,12 +3475,12 @@ msgstr "Jos pohjaristikko on otettu käyttöön, tämä on ylimääräinen risti #: fdmprinter.def.json msgctxt "raft_smoothing label" msgid "Raft Smoothing" -msgstr "" +msgstr "Pohjaristikon tasoitus" #: fdmprinter.def.json msgctxt "raft_smoothing description" msgid "This setting control how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle." -msgstr "" +msgstr "Tällä asetuksella säädetään, kuinka paljon pohjaristikon ulkolinjan sisäkulmia pyöristetään. Sisäpuoliset kulmat pyöristetään puoliympyräksi, jonka säde on yhtä suuri kuin tässä annettu arvo. Asetuksella myös poistetaan pohjaristikon ulkolinjan reiät, jotka ovat pienempiä kuin tällainen ympyrä." #: fdmprinter.def.json msgctxt "raft_airgap label" @@ -4166,12 +4160,12 @@ msgstr "Vähennä Z-sauman näkyvyyttä tasoittamalla kierukoidut ääriviivat ( #: fdmprinter.def.json msgctxt "relative_extrusion label" msgid "Relative Extrusion" -msgstr "" +msgstr "Suhteellinen pursotus" #: fdmprinter.def.json msgctxt "relative_extrusion description" msgid "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the Gcode. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any Gcode script is output." -msgstr "" +msgstr "Käytä suhteellista pursotusta absoluuttisen pursotuksen sijaan. Suhteellisten E-askelten käyttö helpottaa Gcoden jälkikäsittelyä. Kaikki tulostimet eivät kuitenkaan tue sitä, ja se saattaa aiheuttaa hyvin vähäisiä poikkeamia materiaalin määrässä absoluuttisiin E-askeliin verrattuna. Tästä asetuksesta riippumatta pursotustila on aina absoluuttinen, ennen kuin mitään Gcode-komentosarjaa tuotetaan." #: fdmprinter.def.json msgctxt "experimental label" @@ -4186,12 +4180,12 @@ msgstr "kokeellinen!" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" -msgstr "" +msgstr "Optimoi seinämien tulostusjärjestys" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order description" msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization." -msgstr "" +msgstr "Optimoi seinämien tulostusjärjestys takaisinvetojen ja kuljetun etäisyyden vähentämiseksi. Useimmat osat hyötyvät tämän asetuksen käytöstä, mutta joissakin saattaa kestää kauemmin, joten vertaa tulostusajan arvioita optimointia käytettäessä ja ilman sitä." #: fdmprinter.def.json msgctxt "draft_shield_enabled label" @@ -4316,22 +4310,22 @@ msgstr "Muuttaa ylä-/alakerrosten tulostussuuntaa. Normaalisti ne tulostetaan v #: fdmprinter.def.json msgctxt "cross_infill_pocket_size label" msgid "Cross 3D Pocket Size" -msgstr "" +msgstr "Risti 3D:n taskujen koko" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size description" msgid "The size of pockets at four-way crossings in the cross 3D pattern at heights where the pattern is touching itself." -msgstr "" +msgstr "Taskujen koko nelisuuntaisissa risteyksissä risti 3D -kuviossa korkeuksissa, joissa kuvio koskettaa itseään." #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly label" msgid "Alternate Cross 3D Pockets" -msgstr "" +msgstr "Vuoroittaiset risti 3D -taskut" #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly description" msgid "Only apply pockets at half of the four-way crossings in the cross 3D pattern and alternate the location of the pockets between heights where the pattern is touching itself." -msgstr "" +msgstr "Käytä taskuja vain puolessa nelisuuntaisista risteyksistä risti 3D -kuviossa ja vuorottele taskujen sijainnit sellaisten korkeuksien välillä, joissa kuvio koskettaa itseään." #: fdmprinter.def.json msgctxt "spaghetti_infill_enabled label" @@ -4633,9 +4627,7 @@ msgctxt "wireframe_up_half_speed description" msgid "" "Distance of an upward move which is extruded with half speed.\n" "This can cause better adhesion to previous layers, while not heating the material in those layers too much. Only applies to Wire Printing." -msgstr "" -"Puolella nopeudella pursotetun nousuliikkeen etäisyys.\n" -"Se voi parantaa tarttuvuutta edellisiin kerroksiin kuumentamatta materiaalia liikaa kyseisissä kerroksissa. Koskee vain rautalankamallin tulostusta." +msgstr "Puolella nopeudella pursotetun nousuliikkeen etäisyys.\nSe voi parantaa tarttuvuutta edellisiin kerroksiin kuumentamatta materiaalia liikaa kyseisissä kerroksissa. Koskee vain rautalankamallin tulostusta." #: fdmprinter.def.json msgctxt "wireframe_top_jump label" @@ -4755,12 +4747,12 @@ msgstr "Yläpinnan läpikäynti yhden ylimääräisen kerran ilman materiaalin p #: fdmprinter.def.json msgctxt "ironing_only_highest_layer label" msgid "Iron Only Highest Layer" -msgstr "" +msgstr "Silitä vain korkein kerros" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer description" msgid "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish." -msgstr "" +msgstr "Suorita silitys vain verkon viimeisessä kerroksessa. Tämä säästää aikaa, jos alemmat kerrokset eivät edellytä sileää pintaviimeistelyä." #: fdmprinter.def.json msgctxt "ironing_pattern label" @@ -5124,4 +5116,4 @@ msgstr "Mallissa käytettävä muunnosmatriisi, kun malli ladataan tiedostosta." #~ msgctxt "multiple_mesh_overlap label" #~ msgid "Dual Extrusion Overlap" -#~ msgstr "Kaksoispursotuksen limitys" +#~ msgstr "Kaksoispursotuksen limitys" \ No newline at end of file diff --git a/resources/i18n/fr_FR/cura.po b/resources/i18n/fr_FR/cura.po index 21dd2e9882..d5cc344828 100644 --- a/resources/i18n/fr_FR/cura.po +++ b/resources/i18n/fr_FR/cura.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:30+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: French\n" "Language: fr_FR\n" @@ -24,7 +24,7 @@ msgstr "Paramètres de la machine" #: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" -msgstr "" +msgstr "Visualisation par rayons X" #: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" @@ -39,17 +39,17 @@ msgstr "Fichier GCode" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:65 msgctxt "@action:button" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Imprimer avec Doodle3D WiFi-Box" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:66 msgctxt "@properties:tooltip" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Imprimer avec Doodle3D WiFi-Box" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:86 msgctxt "@info:status" msgid "Connecting to Doodle3D Connect" -msgstr "" +msgstr "Connexion avec Doodle3D Connecter..." #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:87 #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:155 @@ -73,32 +73,32 @@ msgstr "Annuler" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:154 msgctxt "@info:status" msgid "Sending data to Doodle3D Connect" -msgstr "" +msgstr "Envoi de données vers Doodle3D Connecter..." #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:161 msgctxt "@info:status" msgid "Unable to send data to Doodle3D Connect. Is another job still active?" -msgstr "" +msgstr "Impossible d'envoyer les données à Doodle3D Connect. Une autre tâche est-elle toujours active ?" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:175 msgctxt "@info:status" msgid "Storing data on Doodle3D Connect" -msgstr "" +msgstr "Enregistrement de données dans Doodle3D Connecter..." #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:213 msgctxt "@info:status" msgid "File sent to Doodle3D Connect" -msgstr "" +msgstr "Fichier envoyé vers Doodle3D Connecter" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@action:button" msgid "Open Connect.." -msgstr "" +msgstr "Ouvrir Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@info:tooltip" msgid "Open the Doodle3D Connect web interface" -msgstr "" +msgstr "Ouvrir l'interface web Doodle3D Connecter" #: /home/ruben/Projects/Cura/plugins/ChangeLogPlugin/ChangeLog.py:35 msgctxt "@item:inmenu" @@ -143,7 +143,7 @@ msgstr "Impossible de démarrer une nouvelle tâche car l'imprimante est occupé #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:153 msgctxt "@info:title" msgid "Print Details" -msgstr "" +msgstr "Imprimer les détails" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:status" @@ -153,7 +153,7 @@ msgstr "L'imprimante ne prend pas en charge l'impression par USB car elle utilis #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:title" msgid "USB Printing" -msgstr "" +msgstr "Impression par USB" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:460 msgctxt "@info:status" @@ -168,7 +168,7 @@ msgstr "Impossible de démarrer une nouvelle tâche car l'imprimante ne prend pa #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1296 msgctxt "@info:title" msgid "Warning" -msgstr "" +msgstr "Avertissement" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:108 msgctxt "@info" @@ -184,7 +184,7 @@ msgstr "Impossible de trouver le firmware requis pour l'imprimante sur %s." #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:122 msgctxt "@info:title" msgid "Printer Firmware" -msgstr "" +msgstr "Firmware de l'imprimante" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." @@ -201,25 +201,25 @@ msgstr "Enregistrer sur un lecteur amovible {0}" #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" -msgstr "" +msgstr "Enregistrement sur le lecteur amovible {0}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:89 msgctxt "@info:title" msgid "Saving" -msgstr "" +msgstr "Enregistrement..." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:99 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:102 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" -msgstr "" +msgstr "Impossible d'enregistrer {0} : {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:118 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." -msgstr "" +msgstr "Impossible de trouver un nom de fichier lors d'une tentative d'écriture sur {device}." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:131 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146 @@ -236,7 +236,7 @@ msgstr "Impossible d'enregistrer sur le lecteur {0}: {1}" #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1305 msgctxt "@info:title" msgid "Error" -msgstr "" +msgstr "Erreur" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 #, python-brace-format @@ -247,7 +247,7 @@ msgstr "Enregistré sur le lecteur amovible {0} sous {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 msgctxt "@info:title" msgid "File Saved" -msgstr "" +msgstr "Fichier enregistré" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 msgctxt "@action:button" @@ -269,7 +269,7 @@ msgstr "Lecteur {0} éjecté. Vous pouvez maintenant le retirer en tout sécurit #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:156 msgctxt "@info:title" msgid "Safely Remove Hardware" -msgstr "" +msgstr "Retirez le lecteur en toute sécurité" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:158 #, python-brace-format @@ -304,7 +304,7 @@ msgstr "Accès à l'imprimante demandé. Veuillez approuver la demande sur l'imp #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:157 msgctxt "@info:title" msgid "Connection status" -msgstr "" +msgstr "Statut de la connexion" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:158 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:158 @@ -319,7 +319,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:500 msgctxt "@info:title" msgid "Connection Status" -msgstr "" +msgstr "Statut de la connexion" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:159 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:159 @@ -417,7 +417,7 @@ msgstr "Impossible de démarrer une nouvelle tâche d'impression car l'imprimant #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:650 msgctxt "@info:title" msgid "Printer Status" -msgstr "" +msgstr "Statut de l'imprimante" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:674 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:660 @@ -488,7 +488,7 @@ msgstr "Envoi des données à l'imprimante" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:839 msgctxt "@info:title" msgid "Sending Data" -msgstr "" +msgstr "Envoi des données..." #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:908 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:890 @@ -547,73 +547,73 @@ msgstr "Connecter via le réseau" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:103 msgid "This printer is not set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "L'imprimante n'est pas configurée pour héberger un groupe d'imprimantes connectées Ultimaker 3." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:104 #, python-brace-format msgctxt "Count is number of printers." msgid "This printer is the host for a group of {count} connected Ultimaker 3 printers." -msgstr "" +msgstr "L'imprimante n'est pas configurée pour héberger un groupe de {count} imprimantes connectées Ultimaker 3." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:105 #, python-brace-format msgid "{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate." -msgstr "" +msgstr "{printer_name} a terminé d'imprimer '{job_name}'. Veuillez enlever l'impression et confirmer avoir débarrassé le plateau." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:106 #, python-brace-format msgid "{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing." -msgstr "" +msgstr "{printer_name} est réservé pour imprimer '{job_name}'. Veuillez modifier la configuration de l'imprimante pour qu'elle corresponde à la tâche et commence l'impression." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:196 msgctxt "@info:status" msgid "Sending new jobs (temporarily) blocked, still sending the previous print job." -msgstr "" +msgstr "Envoi de nouvelles tâches (temporairement) bloqué, envoi de la tâche d'impression précédente en cours." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:212 msgctxt "@info:status" msgid "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Impossible d'envoyer une nouvelle tâche d'impression : cette imprimante 3D n'est pas (encore) configurée pour héberger un groupe d'imprimantes connectées Ultimaker 3." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:425 #, python-brace-format msgctxt "@info:progress" msgid "Sending {file_name} to group {cluster_name}" -msgstr "" +msgstr "Envoi de {file_name} vers le groupe {cluster_name}..." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:498 #, python-brace-format msgctxt "@info:status" msgid "Sent {file_name} to group {cluster_name}." -msgstr "" +msgstr "{file_name} envoyé vers le groupe {cluster_name}." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:503 msgctxt "@action:button" msgid "Show print jobs" -msgstr "" +msgstr "Afficher les tâches d'impression" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:504 msgctxt "@info:tooltip" msgid "Opens the print jobs interface in your browser." -msgstr "" +msgstr "Ouvre l'interface d'impression des tâches dans votre navigateur." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:520 #, python-brace-format msgctxt "@info:status" msgid "Unable to send print job to group {cluster_name}." -msgstr "" +msgstr "Impossible d'envoyer la tâche d'impression vers le groupe {cluster_name}." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:71 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "To ensure that your {machine_name} is equipped with the latest features it is recommended to update the firmware regularly. This can be done on the {machine_name} (when connected to the network) or via USB." -msgstr "" +msgstr "Pour s'assurer que votre {machine_name} est pourvue des dernières fonctionnalités, il est recommandé de mettre régulièrement à jour le firmware. Cela peut se faire sur la {machine_name} (lorsque connectée au réseau) ou via USB." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:72 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s firmware available" -msgstr "" +msgstr "Nouveau firmware %s disponible" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:73 #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:149 @@ -624,7 +624,7 @@ msgstr "Télécharger" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:83 msgctxt "@info" msgid "Could not access update information." -msgstr "" +msgstr "Impossible d'accéder aux informations de mise à jour." #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:199 msgctxt "@info:status" @@ -663,7 +663,7 @@ msgstr "Cura collecte des statistiques anonymes sur le découpage. Vous pouvez d #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:46 msgctxt "@info:title" msgid "Collecting Data" -msgstr "" +msgstr "Collecte des données..." #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:48 msgctxt "@action:button" @@ -684,7 +684,7 @@ msgstr "Fichier GCode" #: /home/ruben/Projects/Cura/plugins/LayerView/__init__.py:13 msgctxt "@item:inlistbox" msgid "Layer view" -msgstr "" +msgstr "Vue en couches" #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:93 msgctxt "@info:status" @@ -694,7 +694,7 @@ msgstr "Cura n'affiche pas les couches avec précision lorsque l'impression fila #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:94 msgctxt "@info:title" msgid "Layer View" -msgstr "" +msgstr "Vue en couches" #: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" @@ -724,7 +724,7 @@ msgstr "Image GIF" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." -msgstr "" +msgstr "Impossible de découper le matériau actuel, car celui-ci est incompatible avec la machine ou la configuration sélectionnée." #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:297 @@ -732,7 +732,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:316 msgctxt "@info:title" msgid "Unable to slice" -msgstr "" +msgstr "Impossible de découper" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:296 #, python-brace-format @@ -759,7 +759,7 @@ msgstr "Traitement des couches" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:238 msgctxt "@info:title" msgid "Information" -msgstr "" +msgstr "Informations" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" @@ -798,18 +798,18 @@ msgstr "Buse" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:28 msgctxt "@menuitem" msgid "Browse plugins" -msgstr "" +msgstr "Parcourir les plug-ins" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:163 #, python-brace-format msgctxt "@info:status" msgid "Failed to get plugin ID from {0}" -msgstr "" +msgstr "Échec de l'obtention de l'identifiant du plug-in au départ de {0}" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:164 msgctxt "@info:tile" msgid "Warning" -msgstr "" +msgstr "Avertissement" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:202 msgctxt "@window:title" @@ -819,7 +819,7 @@ msgstr "Navigateur de plug-ins" #: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" -msgstr "" +msgstr "Vue solide" #: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" @@ -835,7 +835,7 @@ msgstr "Analyse du G-Code" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:370 msgctxt "@info:title" msgid "G-code Details" -msgstr "" +msgstr "Détails G-Code" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:368 msgctxt "@info:generic" @@ -917,7 +917,7 @@ msgstr "Support" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:95 msgctxt "@tooltip" msgid "Skirt" -msgstr "" +msgstr "Jupe" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:96 msgctxt "@tooltip" @@ -958,7 +958,7 @@ msgstr "Recherche d'un nouvel emplacement pour les objets" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:34 msgctxt "@info:title" msgid "Finding Location" -msgstr "" +msgstr "Recherche d'emplacement..." #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:89 #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 @@ -969,7 +969,7 @@ msgstr "Impossible de trouver un emplacement dans le volume d'impression pour to #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:90 msgctxt "@info:title" msgid "Can't Find Location" -msgstr "" +msgstr "Impossible de trouver un emplacement" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:431 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:112 @@ -982,7 +982,7 @@ msgstr "Le fichier existe déjà" #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" -msgstr "" +msgstr "Le fichier {0} existe déjà. Êtes-vous sûr de vouloir le remplacer ?" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:815 msgctxt "@label" @@ -1003,7 +1003,7 @@ msgstr "Le matériau sélectionné est incompatible avec la machine ou la config #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:title" msgid "Incompatible Material" -msgstr "" +msgstr "Matériau incompatible" #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:status Has a cancel button next to it." @@ -1024,24 +1024,24 @@ msgstr "Annuler la modification du diamètre du matériau." #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" -msgstr "" +msgstr "Échec de l'exportation du profil vers {0} : {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:150 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." -msgstr "" +msgstr "Échec de l'exportation du profil vers {0} : le plug-in du générateur a rapporté une erreur." #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:155 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" -msgstr "" +msgstr "Profil exporté vers {0}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 msgctxt "@info:title" msgid "Export Details" -msgstr "" +msgstr "Exporter les détails" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:182 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:204 @@ -1050,7 +1050,7 @@ msgstr "" #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to import profile from {0}: {1}" -msgstr "" +msgstr "Échec de l'importation du profil depuis le fichier {0} : {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:215 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:251 @@ -1089,7 +1089,7 @@ msgstr "La hauteur du volume d'impression a été réduite en raison de la valeu #: /home/ruben/Projects/Cura/cura/BuildVolume.py:102 msgctxt "@info:title" msgid "Build Volume" -msgstr "" +msgstr "Volume d'impression" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:34 msgctxt "@info:status" @@ -1100,7 +1100,7 @@ msgstr "Multiplication et placement d'objets" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 msgctxt "@info:title" msgid "Placing Object" -msgstr "" +msgstr "Placement de l'objet..." #: /home/ruben/Projects/Cura/cura/CrashHandler.py:54 msgctxt "@title:window" @@ -1113,10 +1113,7 @@ msgid "" "

A fatal exception has occurred that we could not recover from!

\n" "

Please use the information below to post a bug report at http://github.com/Ultimaker/Cura/issues

\n" " " -msgstr "" -"

Une erreur fatale que nous ne pouvons résoudre s'est produite !

\n" -"

Veuillez utiliser les informations ci-dessous pour envoyer un rapport d'erreur à http://github.com/Ultimaker/Cura/issues

\n" -" " +msgstr "

Une erreur fatale que nous ne pouvons résoudre s'est produite !

\n

Veuillez utiliser les informations ci-dessous pour envoyer un rapport d'erreur à http://github.com/Ultimaker/Cura/issues

\n " #: /home/ruben/Projects/Cura/cura/CrashHandler.py:112 msgctxt "@action:button" @@ -1418,10 +1415,7 @@ msgid "" "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n" "\n" "Select your printer from the list below:" -msgstr "" -"Pour imprimer directement sur votre imprimante sur le réseau, assurez-vous que votre imprimante est connectée au réseau via un câble réseau ou en connectant votre imprimante à votre réseau Wi-Fi. Si vous ne connectez pas Cura avec votre imprimante, vous pouvez utiliser une clé USB pour transférer les fichiers g-code sur votre imprimante.\n" -"\n" -"Sélectionnez votre imprimante dans la liste ci-dessous :" +msgstr "Pour imprimer directement sur votre imprimante sur le réseau, assurez-vous que votre imprimante est connectée au réseau via un câble réseau ou en connectant votre imprimante à votre réseau Wi-Fi. Si vous ne connectez pas Cura avec votre imprimante, vous pouvez utiliser une clé USB pour transférer les fichiers g-code sur votre imprimante.\n\nSélectionnez votre imprimante dans la liste ci-dessous :" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:75 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:75 @@ -1547,17 +1541,17 @@ msgstr "Activer la configuration" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:284 msgctxt "@label" msgid "This printer is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "Cette imprimante n'est pas configurée pour héberger un groupe d'imprimantes connectées Ultimaker 3." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:287 msgctxt "@label" msgid "This printer is the host for a group of %1 connected Ultimaker 3 printers" -msgstr "" +msgstr "L'imprimante n'est pas configurée pour héberger un groupe de %1 imprimantes connectées Ultimaker 3." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:24 msgctxt "@title:window" msgid "Print over network" -msgstr "" +msgstr "Imprimer sur le réseau" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:92 msgctxt "@action:button" @@ -1567,98 +1561,98 @@ msgstr "Imprimer" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:50 msgctxt "@label: arg 1 is group name" msgid "%1 is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "%1 n'est pas configurée pour héberger un groupe d'imprimantes connectées Ultimaker 3." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:311 msgctxt "@label:status" msgid "Printing" -msgstr "" +msgstr "Impression..." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:315 msgctxt "@label:status" msgid "Reserved" -msgstr "" +msgstr "Réservée" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:317 msgctxt "@label:status" msgid "Finished" -msgstr "" +msgstr "Terminé" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:320 msgctxt "@label:status" msgid "Preparing" -msgstr "" +msgstr "Préparation..." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:327 msgctxt "@label:status" msgid "Available" -msgstr "" +msgstr "Disponible" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:367 msgctxt "@label" msgid "Completed on: " -msgstr "" +msgstr "Finalisé sur : " #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:371 msgctxt "@label" msgid "Clear build plate" -msgstr "" +msgstr "Enlever les objets du plateau" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:375 msgctxt "@label" msgid "Preparing to print" -msgstr "" +msgstr "Préparation de l'impression..." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:379 msgctxt "@label" msgid "Not accepting print jobs" -msgstr "" +msgstr "Non acceptation des tâches d'impression" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:14 msgctxt "@info:tooltip" msgid "Opens the print jobs page with your default web browser." -msgstr "" +msgstr "Ouvre la page des tâches d'impression avec votre navigateur web." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:15 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:154 msgctxt "@action:button" msgid "View print jobs" -msgstr "" +msgstr "Afficher les tâches d'impression" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:36 msgctxt "@label" msgid "PRINTER GROUP" -msgstr "" +msgstr "GROUPE D'IMPRIMANTES" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:69 msgctxt "@title" msgid "Print jobs" -msgstr "" +msgstr "Imprimer les tâches" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:100 msgctxt "@label" msgid "Printing" -msgstr "" +msgstr "Impression..." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:118 msgctxt "@label" msgid "Queued" -msgstr "" +msgstr "Mis en file d'attente" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:135 msgctxt "@label" msgid "Waiting for configuration change" -msgstr "" +msgstr "En attente de modification de configuration" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:194 msgctxt "@label:title" msgid "Printers" -msgstr "" +msgstr "Imprimantes" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:247 msgctxt "@action:button" msgid "View printers" -msgstr "" +msgstr "Afficher les imprimantes" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/ConfigDialog.qml:20 msgctxt "@title:window" @@ -2049,7 +2043,7 @@ msgstr "Installé" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:199 msgctxt "@title:window" msgid "Plugin License Agreement" -msgstr "" +msgstr "Plug-in d'accord de licence" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:220 msgctxt "@label" @@ -2057,17 +2051,17 @@ msgid "" " plugin contains a license.\n" "You need to accept this license to install this plugin.\n" "Do you agree with the terms below?" -msgstr "" +msgstr " le plug-in contient une licence.\nVous devez approuver cette licence pour installer ce plug-in.\nAcceptez-vous les clauses ci-dessous ?" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:242 msgctxt "@action:button" msgid "Accept" -msgstr "" +msgstr "Accepter" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:253 msgctxt "@action:button" msgid "Decline" -msgstr "" +msgstr "Refuser" #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml:25 #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:25 @@ -2322,9 +2316,7 @@ msgctxt "@text:window" msgid "" "You have customized some profile settings.\n" "Would you like to keep or discard those settings?" -msgstr "" -"Vous avez personnalisé certains paramètres du profil.\n" -"Souhaitez-vous conserver ces changements, ou les annuler ?" +msgstr "Vous avez personnalisé certains paramètres du profil.\nSouhaitez-vous conserver ces changements, ou les annuler ?" #: /home/ruben/Projects/Cura/resources/qml/DiscardOrKeepProfileChangesDialog.qml:110 msgctxt "@title:column" @@ -2908,12 +2900,12 @@ msgstr "Importer un matériau" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:320 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" -msgstr "" +msgstr "Impossible d'importer le matériau %1 : %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:324 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" -msgstr "" +msgstr "Matériau %1 importé avec succès" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:343 #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:358 @@ -2924,12 +2916,12 @@ msgstr "Exporter un matériau" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:362 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" -msgstr "" +msgstr "Échec de l'exportation de matériau vers %1 : %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:368 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" -msgstr "" +msgstr "Matériau exporté avec succès vers %1" #: /home/ruben/Projects/Cura/resources/qml/AddMachineDialog.qml:18 #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:766 @@ -2962,9 +2954,7 @@ msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" -msgstr "" -"Cura a été développé par Ultimaker B.V. en coopération avec la communauté Ultimaker.\n" -"Cura est fier d'utiliser les projets open source suivants :" +msgstr "Cura a été développé par Ultimaker B.V. en coopération avec la communauté Ultimaker.\nCura est fier d'utiliser les projets open source suivants :" #: /home/ruben/Projects/Cura/resources/qml/AboutDialog.qml:118 msgctxt "@label" @@ -3067,10 +3057,7 @@ msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." -msgstr "" -"Certaines valeurs de paramètre / forçage sont différentes des valeurs enregistrées dans le profil. \n" -"\n" -"Cliquez pour ouvrir le gestionnaire de profils." +msgstr "Certaines valeurs de paramètre / forçage sont différentes des valeurs enregistrées dans le profil. \n\nCliquez pour ouvrir le gestionnaire de profils." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:145 msgctxt "@label:textbox" @@ -3108,10 +3095,7 @@ msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." -msgstr "" -"Certains paramètres masqués utilisent des valeurs différentes de leur valeur normalement calculée.\n" -"\n" -"Cliquez pour rendre ces paramètres visibles." +msgstr "Certains paramètres masqués utilisent des valeurs différentes de leur valeur normalement calculée.\n\nCliquez pour rendre ces paramètres visibles." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:62 msgctxt "@label Header for list of settings." @@ -3139,10 +3123,7 @@ msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." -msgstr "" -"Ce paramètre possède une valeur qui est différente du profil.\n" -"\n" -"Cliquez pour restaurer la valeur du profil." +msgstr "Ce paramètre possède une valeur qui est différente du profil.\n\nCliquez pour restaurer la valeur du profil." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:284 msgctxt "@label" @@ -3150,10 +3131,7 @@ msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." -msgstr "" -"Ce paramètre est normalement calculé mais il possède actuellement une valeur absolue définie.\n" -"\n" -"Cliquez pour restaurer la valeur calculée." +msgstr "Ce paramètre est normalement calculé mais il possède actuellement une valeur absolue définie.\n\nCliquez pour restaurer la valeur calculée." #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:118 msgctxt "@label:listbox" @@ -3165,9 +3143,7 @@ msgctxt "@label:listbox" msgid "" "Print Setup disabled\n" "G-code files cannot be modified" -msgstr "" -"Configuration de l'impression désactivée\n" -"Les fichiers G-Code ne peuvent pas être modifiés" +msgstr "Configuration de l'impression désactivée\nLes fichiers G-Code ne peuvent pas être modifiés" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:326 msgctxt "@label" @@ -3177,22 +3153,22 @@ msgstr "00 h 00 min" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:344 msgctxt "@tooltip" msgid "Time information" -msgstr "" +msgstr "Information horaire" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:370 msgctxt "@description" msgid "Print time" -msgstr "" +msgstr "Imprimer l'heure" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:409 msgctxt "@label" msgid "%1m / ~ %2g / ~ %4 %3" -msgstr "" +msgstr "%1m / ~ %2g / ~ %4 %3" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:414 msgctxt "@label" msgid "%1m / ~ %2g" -msgstr "" +msgstr "%1m / ~ %2g" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:476 msgctxt "@tooltip" @@ -3252,12 +3228,12 @@ msgstr "Aucune imprimante n'est connectée" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:157 msgctxt "@label" msgid "Extruder" -msgstr "" +msgstr "Extrudeuse" #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:120 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." -msgstr "" +msgstr "Température cible de l'extrémité chauffante. L'extrémité chauffante sera chauffée ou refroidie pour tendre vers cette température. Si la valeur est 0, le chauffage de l'extrémité chauffante sera coupé." #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:152 msgctxt "@tooltip" @@ -3726,27 +3702,27 @@ msgstr "Préparer" #: /home/ruben/Projects/Cura/resources/qml/Topbar.qml:79 msgctxt "@title:tab" msgid "Monitor" -msgstr "" +msgstr "Surveiller" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:50 msgctxt "@label" msgid "Layer Height" -msgstr "" +msgstr "Hauteur de la couche" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:62 msgctxt "@label" msgid "Print Speed" -msgstr "" +msgstr "Vitesse d’impression" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:73 msgctxt "@label" msgid "Slower" -msgstr "" +msgstr "Ralentir" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:85 msgctxt "@label" msgid "Faster" -msgstr "" +msgstr "Accélérer" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:416 msgctxt "@label" @@ -3761,7 +3737,7 @@ msgstr "Un remplissage graduel augmentera la quantité de remplissage vers le ha #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:602 msgctxt "@label" msgid "Enable gradual" -msgstr "" +msgstr "Permettre le remplissage graduel" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:668 msgctxt "@label" @@ -3838,7 +3814,7 @@ msgstr "Matériau" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:374 msgctxt "@label" msgid "Check material compatibility" -msgstr "" +msgstr "Vérifier la compatibilité du matériau" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:394 msgctxt "@tooltip" @@ -3898,12 +3874,12 @@ msgstr "Mode God" #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box." -msgstr "" +msgstr "Accepte les G-Code et les envoie par Wi-Fi à une box WiFi Doodle3D." #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "name" msgid "Doodle3D WiFi-Box" -msgstr "" +msgstr "Box WiFi Doodle3D" #: ChangeLogPlugin/plugin.json msgctxt "description" @@ -3958,17 +3934,17 @@ msgstr "Connexion au réseau UM3" #: CuraPrintClusterUpload/plugin.json msgctxt "name" msgid "UM3 Network Connection (Cluster)" -msgstr "" +msgstr "Connexion au réseau UM3 (Cluster)" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." -msgstr "" +msgstr "Vérifie les mises à jour du firmware." #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" -msgstr "" +msgstr "Vérificateur des mises à jour du firmware" #: CuraSolidWorksPlugin/plugin.json msgctxt "description" @@ -4063,12 +4039,12 @@ msgstr "Mise à niveau de 2.5 vers 2.6" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." -msgstr "" +msgstr "Met à niveau les configurations, de Cura 2.7 vers Cura 3.0." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" -msgstr "" +msgstr "Mise à niveau de version, de 2.7 vers 3.0" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" @@ -4972,4 +4948,4 @@ msgstr "Lecteur de profil Cura" #~ msgctxt "@label:" #~ msgid "Print Again" -#~ msgstr "Imprimer à nouveau" +#~ msgstr "Imprimer à nouveau" \ No newline at end of file diff --git a/resources/i18n/fr_FR/fdmprinter.def.json.po b/resources/i18n/fr_FR/fdmprinter.def.json.po index 13df6ba204..0a4a135b99 100644 --- a/resources/i18n/fr_FR/fdmprinter.def.json.po +++ b/resources/i18n/fr_FR/fdmprinter.def.json.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:31+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: French\n" "Language: fr_FR\n" @@ -56,9 +56,7 @@ msgctxt "machine_start_gcode description" msgid "" "Gcode commands to be executed at the very start - separated by \n" "." -msgstr "" -"Commandes Gcode à exécuter au tout début, séparées par \n" -"." +msgstr "Commandes Gcode à exécuter au tout début, séparées par \n." #: fdmprinter.def.json msgctxt "machine_end_gcode label" @@ -70,9 +68,7 @@ msgctxt "machine_end_gcode description" msgid "" "Gcode commands to be executed at the very end - separated by \n" "." -msgstr "" -"Commandes Gcode à exécuter à la toute fin, séparées par \n" -"." +msgstr "Commandes Gcode à exécuter à la toute fin, séparées par \n." #: fdmprinter.def.json msgctxt "material_guid label" @@ -1122,7 +1118,7 @@ msgstr "Aléatoire" #: fdmprinter.def.json msgctxt "z_seam_type option sharpest_corner" msgid "Sharpest Corner" -msgstr "" +msgstr "Angle le plus aigu" #: fdmprinter.def.json msgctxt "z_seam_x label" @@ -1147,32 +1143,32 @@ msgstr "Coordonnée Y de la position près de laquelle démarrer l'impression de #: fdmprinter.def.json msgctxt "z_seam_corner label" msgid "Seam Corner Preference" -msgstr "" +msgstr "Préférence de jointure d'angle" #: fdmprinter.def.json msgctxt "z_seam_corner description" msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner." -msgstr "" +msgstr "Vérifie si les angles du contour du modèle influencent l'emplacement de la jointure. « Aucune » signifie que les angles n'ont aucune influence sur l'emplacement de la jointure. « Masquer jointure » génère généralement le positionnement de la jointure sur un angle intérieur. « Exposer jointure » génère généralement le positionnement de la jointure sur un angle extérieur. « Masquer ou exposer jointure » génère généralement le positionnement de la jointure sur un angle intérieur ou extérieur." #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_none" msgid "None" -msgstr "" +msgstr "Aucun" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_inner" msgid "Hide Seam" -msgstr "" +msgstr "Masquer jointure" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" -msgstr "" +msgstr "Exposer jointure" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_any" msgid "Hide or Expose Seam" -msgstr "" +msgstr "Masquer ou exposer jointure" #: fdmprinter.def.json msgctxt "z_seam_relative label" @@ -1252,7 +1248,7 @@ msgstr "Motif de remplissage" #: fdmprinter.def.json msgctxt "infill_pattern description" msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, cubic, octet, quarter cubic and concentric patterns are fully printed every layer. Cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction." -msgstr "" +msgstr "Le motif du matériau de remplissage de l'impression. La ligne et le remplissage en zigzag changent de sens à chaque alternance de couche, réduisant ainsi les coûts matériels. Les motifs en grille, en triangle, octaédriques, quart cubiques et concentriques sont entièrement imprimés sur chaque couche. Le remplissage cubique, quart cubique et octaédrique change à chaque couche afin d'offrir une répartition plus égale de la solidité dans chaque direction." #: fdmprinter.def.json msgctxt "infill_pattern option grid" @@ -1282,12 +1278,12 @@ msgstr "Subdivision cubique" #: fdmprinter.def.json msgctxt "infill_pattern option tetrahedral" msgid "Octet" -msgstr "" +msgstr "Octaédrique" #: fdmprinter.def.json msgctxt "infill_pattern option quarter_cubic" msgid "Quarter Cubic" -msgstr "" +msgstr "Quart cubique" #: fdmprinter.def.json msgctxt "infill_pattern option concentric" @@ -1307,22 +1303,22 @@ msgstr "Zig Zag" #: fdmprinter.def.json msgctxt "infill_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Entrecroisé" #: fdmprinter.def.json msgctxt "infill_pattern option cross_3d" msgid "Cross 3D" -msgstr "" +msgstr "Entrecroisé 3D" #: fdmprinter.def.json msgctxt "zig_zaggify_infill label" msgid "Connect Infill Lines" -msgstr "" +msgstr "Relier les lignes de remplissage" #: fdmprinter.def.json msgctxt "zig_zaggify_infill description" msgid "Connect the ends where the infill pattern meets the inner wall using a lines which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduces the effects on infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used." -msgstr "" +msgstr "Relie les extrémités où le motif de remplissage touche la paroi interne, à l'aide de lignes épousant la forme de la paroi interne. Activer ce paramètre peut faire mieux coller le remplissage aux parois, et réduit les effets du remplissage sur la qualité des surfaces verticales. Désactiver ce paramètre diminue la quantité de matière utilisée." #: fdmprinter.def.json msgctxt "infill_angles label" @@ -1447,32 +1443,32 @@ msgstr "Ne pas générer de zones de remplissage plus petites que cela (utiliser #: fdmprinter.def.json msgctxt "skin_preshrink label" msgid "Skin Removal Width" -msgstr "" +msgstr "Largeur de retrait de la couche extérieure" #: fdmprinter.def.json msgctxt "skin_preshrink description" msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "La plus grande largeur des zones de la couche extérieure à faire disparaître. Toute zone de la couche extérieure plus étroite que cette valeur disparaîtra. Ceci peut aider à limiter le temps et la quantité de matière utilisés pour imprimer la couche extérieure supérieure/inférieure sur les surfaces obliques du modèle." #: fdmprinter.def.json msgctxt "top_skin_preshrink label" msgid "Top Skin Removal Width" -msgstr "" +msgstr "Largeur de retrait de la couche extérieure supérieure" #: fdmprinter.def.json msgctxt "top_skin_preshrink description" msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model." -msgstr "" +msgstr "La plus grande largeur des zones de la couche extérieure supérieure à faire disparaître. Toute zone de la couche extérieure plus étroite que cette valeur disparaîtra. Ceci peut aider à limiter le temps et la quantité de matière utilisés pour imprimer la couche extérieure supérieure sur les surfaces obliques du modèle." #: fdmprinter.def.json msgctxt "bottom_skin_preshrink label" msgid "Bottom Skin Removal Width" -msgstr "" +msgstr "Largeur de retrait de la couche extérieure inférieure" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink description" msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "La plus grande largeur des zones de la couche extérieure inférieure à faire disparaître. Toute zone de la couche extérieure plus étroite que cette valeur disparaîtra. Ceci peut aider à limiter le temps et la quantité de matière utilisés pour imprimer la couche extérieure inférieure sur les surfaces obliques du modèle." #: fdmprinter.def.json msgctxt "expand_skins_expand_distance label" @@ -1482,27 +1478,27 @@ msgstr "Distance d'expansion de la couche extérieure" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance description" msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "La distance à laquelle les couches extérieures s'étendent à l'intérieur du remplissage. Des valeurs élevées lient mieux la couche extérieure au motif de remplissage et font mieux adhérer à cette couche les parois des couches voisines. Des valeurs faibles économisent la quantité de matériau utilisé." #: fdmprinter.def.json msgctxt "top_skin_expand_distance label" msgid "Top Skin Expand Distance" -msgstr "" +msgstr "Distance d'expansion de la couche extérieure supérieure" #: fdmprinter.def.json msgctxt "top_skin_expand_distance description" msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "La distance à laquelle les couches extérieures supérieures s'étendent à l'intérieur du remplissage. Des valeurs élevées lient mieux la couche extérieure au motif de remplissage et font mieux adhérer à cette couche les parois de la couche supérieure. Des valeurs faibles économisent la quantité de matériau utilisé." #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance label" msgid "Bottom Skin Expand Distance" -msgstr "" +msgstr "Distance d'expansion de la couche extérieure inférieure" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance description" msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used." -msgstr "" +msgstr "La distance à laquelle les couches extérieures inférieures s'étendent à l'intérieur du remplissage. Des valeurs élevées lient mieux la couche extérieure au motif de remplissage et font mieux adhérer à cette couche les parois de la couche inférieure. Des valeurs faibles économisent la quantité de matériau utilisé." #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion label" @@ -2822,7 +2818,7 @@ msgstr "Zig Zag" #: fdmprinter.def.json msgctxt "support_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Entrecroisé" #: fdmprinter.def.json msgctxt "support_connect_zigzags label" @@ -2837,32 +2833,32 @@ msgstr "Relie les zigzags. Cela augmente la solidité des supports en zigzag." #: fdmprinter.def.json msgctxt "support_skip_some_zags label" msgid "Break Up Support In Chunks" -msgstr "" +msgstr "Démantèlement du support en morceaux" #: fdmprinter.def.json msgctxt "support_skip_some_zags description" msgid "Skip some support line connections to make the support structure easier to break away. This setting is applicable to the Zig Zag support infill pattern." -msgstr "" +msgstr "Ignorer certaines connexions de ligne du support pour rendre la structure de support plus facile à casser. Ce paramètre s'applique au motif de remplissage du support en zigzag." #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm label" msgid "Support Chunk Size" -msgstr "" +msgstr "Taille de morceaux du support" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm description" msgid "Leave out a connection between support lines once every N millimeter to make the support structure easier to break away." -msgstr "" +msgstr "Ignorer une connexion entre lignes du support tous les N millimètres, pour rendre la structure de support plus facile à casser." #: fdmprinter.def.json msgctxt "support_zag_skip_count label" msgid "Support Chunk Line Count" -msgstr "" +msgstr "Comptage des lignes de morceaux du support" #: fdmprinter.def.json msgctxt "support_zag_skip_count description" msgid "Skip one in every N connection lines to make the support structure easier to break away." -msgstr "" +msgstr "Ignorer une ligne de connexion sur N pour rendre la structure de support plus facile à casser." #: fdmprinter.def.json msgctxt "support_infill_rate label" @@ -3404,9 +3400,7 @@ msgctxt "skirt_gap description" msgid "" "The horizontal distance between the skirt and the first layer of the print.\n" "This is the minimum distance, multiple skirt lines will extend outwards from this distance." -msgstr "" -"La distance horizontale entre la jupe et la première couche de l’impression.\n" -"Il s’agit de la distance minimale séparant la jupe de l’objet. Si la jupe a d’autres lignes, celles-ci s’étendront vers l’extérieur." +msgstr "La distance horizontale entre la jupe et la première couche de l’impression.\nIl s’agit de la distance minimale séparant la jupe de l’objet. Si la jupe a d’autres lignes, celles-ci s’étendront vers l’extérieur." #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length label" @@ -3451,22 +3445,22 @@ msgstr "Imprimer uniquement la bordure sur l'extérieur du modèle. Cela réduit #: fdmprinter.def.json msgctxt "z_offset_layer_0 label" msgid "Initial Layer Z Offset" -msgstr "" +msgstr "Décalage en Z de la couche initiale" #: fdmprinter.def.json msgctxt "z_offset_layer_0 description" msgid "The extruder is offset from the normal height of the first layer by this amount. It can be positive (raised) or negative (lowered). Some filament types adhere to the build plate better if the extruder is raised slightly." -msgstr "" +msgstr "L'extrudeuse est décalée de cette valeur à partir de la hauteur normale de la première couche. Elle peut être positive (relevée) ou négative (abaissée). Certains types de filament adhèrent mieux au plateau si l'extrudeuse est légèrement relevée." #: fdmprinter.def.json msgctxt "z_offset_taper_layers label" msgid "Z Offset Taper Layers" -msgstr "" +msgstr "Couches biseautées de décalage en Z" #: fdmprinter.def.json msgctxt "z_offset_taper_layers description" msgid "When non-zero, the Z offset is reduced to 0 over that many layers. A value of 0 means that the Z offset remains constant for all the layers in the print." -msgstr "" +msgstr "Si non nul, le décalage en Z est ramené à 0 sur un grand nombre de couches. Une valeur égale à 0 signifie que le décalage en Z reste constant pour toutes les couches de l'impression." #: fdmprinter.def.json msgctxt "raft_margin label" @@ -3481,12 +3475,12 @@ msgstr "Si vous avez appliqué un radeau, alors il s’agit de l’espace de rad #: fdmprinter.def.json msgctxt "raft_smoothing label" msgid "Raft Smoothing" -msgstr "" +msgstr "Lissage de radeau" #: fdmprinter.def.json msgctxt "raft_smoothing description" msgid "This setting control how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle." -msgstr "" +msgstr "Ce paramètre définit combien d'angles intérieurs sont arrondis dans le contour de radeau. Les angles internes sont arrondis en un demi-cercle avec un rayon égal à la valeur indiquée ici. Ce paramètre élimine également les cavités dans le contour de radeau qui sont d'une taille inférieure à ce cercle." #: fdmprinter.def.json msgctxt "raft_airgap label" @@ -4166,12 +4160,12 @@ msgstr "Lisser les contours spiralisés pour réduire la visibilité de la joint #: fdmprinter.def.json msgctxt "relative_extrusion label" msgid "Relative Extrusion" -msgstr "" +msgstr "Extrusion relative" #: fdmprinter.def.json msgctxt "relative_extrusion description" msgid "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the Gcode. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any Gcode script is output." -msgstr "" +msgstr "Utiliser l'extrusion relative au lieu de l'extrusion absolue. L'utilisation de pas E relatifs facilite le post-traitement du G-code. Toutefois, elle n'est pas supportée par toutes les imprimantes et peut occasionner de très légers écarts dans la quantité de matériau déposé, en comparaison avec des pas E absolus. Indépendamment de ce paramètre, le mode d'extrusion sera défini par défaut comme absolu avant qu'un quelconque script de G-code soit produit." #: fdmprinter.def.json msgctxt "experimental label" @@ -4186,12 +4180,12 @@ msgstr "expérimental !" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" -msgstr "" +msgstr "Optimiser l'ordre d'impression des parois" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order description" msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization." -msgstr "" +msgstr "Optimiser l'ordre dans lequel des parois sont imprimées de manière à réduire le nombre de retraits et les distances parcourues. La plupart des pièces bénéficieront de cette possibilité, mais certaines peuvent en fait prendre plus de temps à l'impression ; veuillez dès lors comparer les estimations de durée d'impression avec et sans optimisation." #: fdmprinter.def.json msgctxt "draft_shield_enabled label" @@ -4316,22 +4310,22 @@ msgstr "Alterne le sens d'impression des couches du dessus/dessous. Elles sont g #: fdmprinter.def.json msgctxt "cross_infill_pocket_size label" msgid "Cross 3D Pocket Size" -msgstr "" +msgstr "Taille de poches entrecroisées 3D" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size description" msgid "The size of pockets at four-way crossings in the cross 3D pattern at heights where the pattern is touching itself." -msgstr "" +msgstr "La taille de poches aux croisements à quatre branches dans le motif entrecroisé 3D, à des hauteurs où le motif se touche lui-même." #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly label" msgid "Alternate Cross 3D Pockets" -msgstr "" +msgstr "Alterner les poches entrecroisées 3D" #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly description" msgid "Only apply pockets at half of the four-way crossings in the cross 3D pattern and alternate the location of the pockets between heights where the pattern is touching itself." -msgstr "" +msgstr "Ne réalise des poches que sur la moitié des croisements à quatre branches dans le motif entrecroisé 3D et alterne l'emplacement des poches entre les hauteurs où le motif se touche lui-même." #: fdmprinter.def.json msgctxt "spaghetti_infill_enabled label" @@ -4633,9 +4627,7 @@ msgctxt "wireframe_up_half_speed description" msgid "" "Distance of an upward move which is extruded with half speed.\n" "This can cause better adhesion to previous layers, while not heating the material in those layers too much. Only applies to Wire Printing." -msgstr "" -"Distance d’un déplacement ascendant qui est extrudé à mi-vitesse.\n" -"Cela peut permettre une meilleure adhérence aux couches précédentes sans surchauffer le matériau dans ces couches. Uniquement applicable à l'impression filaire." +msgstr "Distance d’un déplacement ascendant qui est extrudé à mi-vitesse.\nCela peut permettre une meilleure adhérence aux couches précédentes sans surchauffer le matériau dans ces couches. Uniquement applicable à l'impression filaire." #: fdmprinter.def.json msgctxt "wireframe_top_jump label" @@ -4755,12 +4747,12 @@ msgstr "Aller au-dessus de la surface supérieure une fois supplémentaire, mais #: fdmprinter.def.json msgctxt "ironing_only_highest_layer label" msgid "Iron Only Highest Layer" -msgstr "" +msgstr "N'étirer que la couche supérieure" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer description" msgid "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish." -msgstr "" +msgstr "N'exécute un étirage que sur l'ultime couche du maillage. Ceci économise du temps si les couches inférieures ne nécessitent pas de fini lisse de surface." #: fdmprinter.def.json msgctxt "ironing_pattern label" @@ -5124,4 +5116,4 @@ msgstr "Matrice de transformation à appliquer au modèle lors de son chargement #~ msgctxt "multiple_mesh_overlap label" #~ msgid "Dual Extrusion Overlap" -#~ msgstr "Chevauchement de double extrusion" +#~ msgstr "Chevauchement de double extrusion" \ No newline at end of file diff --git a/resources/i18n/it_IT/cura.po b/resources/i18n/it_IT/cura.po index 98c7db5fcc..aca74f4611 100644 --- a/resources/i18n/it_IT/cura.po +++ b/resources/i18n/it_IT/cura.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:30+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: Italian\n" "Language: it_IT\n" @@ -24,7 +24,7 @@ msgstr "Impostazioni macchina" #: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" -msgstr "" +msgstr "Vista ai raggi X" #: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" @@ -39,17 +39,17 @@ msgstr "File GCode" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:65 msgctxt "@action:button" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Stampa con Doodle3D WiFi-Box" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:66 msgctxt "@properties:tooltip" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Stampa con Doodle3D WiFi-Box" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:86 msgctxt "@info:status" msgid "Connecting to Doodle3D Connect" -msgstr "" +msgstr "Collegamento a Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:87 #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:155 @@ -73,32 +73,32 @@ msgstr "Annulla" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:154 msgctxt "@info:status" msgid "Sending data to Doodle3D Connect" -msgstr "" +msgstr "Invio dati a Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:161 msgctxt "@info:status" msgid "Unable to send data to Doodle3D Connect. Is another job still active?" -msgstr "" +msgstr "Impossibile inviare dati a Doodle3D Connect. C'è un altro processo in corso?" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:175 msgctxt "@info:status" msgid "Storing data on Doodle3D Connect" -msgstr "" +msgstr "Memorizzazione dati su Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:213 msgctxt "@info:status" msgid "File sent to Doodle3D Connect" -msgstr "" +msgstr "File inviato a Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@action:button" msgid "Open Connect.." -msgstr "" +msgstr "Apri Connect.." #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@info:tooltip" msgid "Open the Doodle3D Connect web interface" -msgstr "" +msgstr "Apri interfaccia web Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/ChangeLogPlugin/ChangeLog.py:35 msgctxt "@item:inmenu" @@ -143,7 +143,7 @@ msgstr "Impossibile avviare un nuovo processo di stampa perché la stampante è #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:153 msgctxt "@info:title" msgid "Print Details" -msgstr "" +msgstr "Dettagli stampa" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:status" @@ -153,7 +153,7 @@ msgstr "Questa stampante non supporta la stampa tramite USB in quanto utilizza l #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:title" msgid "USB Printing" -msgstr "" +msgstr "Stampa USB" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:460 msgctxt "@info:status" @@ -168,7 +168,7 @@ msgstr "Impossibile avviare un nuovo processo di stampa perché la stampante non #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1296 msgctxt "@info:title" msgid "Warning" -msgstr "" +msgstr "Avvertenza" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:108 msgctxt "@info" @@ -184,7 +184,7 @@ msgstr "Impossibile trovare il firmware richiesto per la stampante a %s." #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:122 msgctxt "@info:title" msgid "Printer Firmware" -msgstr "" +msgstr "Firmware stampante" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." @@ -201,25 +201,25 @@ msgstr "Salva su unità rimovibile {0}" #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" -msgstr "" +msgstr "Salvataggio su unità rimovibile {0}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:89 msgctxt "@info:title" msgid "Saving" -msgstr "" +msgstr "Salvataggio in corso" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:99 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:102 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" -msgstr "" +msgstr "Impossibile salvare {0}: {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:118 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." -msgstr "" +msgstr "Impossibile trovare un nome file durante il tentativo di scrittura su {device}." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:131 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146 @@ -236,7 +236,7 @@ msgstr "Impossibile salvare su unità rimovibile {0}: {1}" #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1305 msgctxt "@info:title" msgid "Error" -msgstr "" +msgstr "Errore" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 #, python-brace-format @@ -247,7 +247,7 @@ msgstr "Salvato su unità rimovibile {0} come {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 msgctxt "@info:title" msgid "File Saved" -msgstr "" +msgstr "File salvato" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 msgctxt "@action:button" @@ -269,7 +269,7 @@ msgstr "Espulso {0}. È ora possibile rimuovere in modo sicuro l'unità." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:156 msgctxt "@info:title" msgid "Safely Remove Hardware" -msgstr "" +msgstr "Rimozione sicura dell'hardware" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:158 #, python-brace-format @@ -304,7 +304,7 @@ msgstr "Richiesto accesso alla stampante. Approvare la richiesta sulla stampante #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:157 msgctxt "@info:title" msgid "Connection status" -msgstr "" +msgstr "Stato di connessione" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:158 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:158 @@ -319,7 +319,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:500 msgctxt "@info:title" msgid "Connection Status" -msgstr "" +msgstr "Stato di connessione" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:159 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:159 @@ -417,7 +417,7 @@ msgstr "Impossibile avviare un nuovo processo di stampa perché la stampante è #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:650 msgctxt "@info:title" msgid "Printer Status" -msgstr "" +msgstr "Stato stampante" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:674 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:660 @@ -488,7 +488,7 @@ msgstr "Invio dati alla stampante in corso" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:839 msgctxt "@info:title" msgid "Sending Data" -msgstr "" +msgstr "Invio dati" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:908 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:890 @@ -547,73 +547,73 @@ msgstr "Collega tramite rete" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:103 msgid "This printer is not set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Questa stampante non è configurata per supportare la connessione di un gruppo di stampanti Ultimaker 3." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:104 #, python-brace-format msgctxt "Count is number of printers." msgid "This printer is the host for a group of {count} connected Ultimaker 3 printers." -msgstr "" +msgstr "Questa stampante fa da host per un gruppo di {count} stampanti Ultimaker 3 connesse." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:105 #, python-brace-format msgid "{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate." -msgstr "" +msgstr "{printer_name} ha terminato la stampa '{job_name}'. Raccogliere la stampa e confermare la liberazione del piano di stampa." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:106 #, python-brace-format msgid "{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing." -msgstr "" +msgstr "{printer_name} è riservata per la stampa di '{job_name}'. Modificare la configurazione della stampante in modo che corrisponda al lavoro da eseguire per avviare il processo di stampa." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:196 msgctxt "@info:status" msgid "Sending new jobs (temporarily) blocked, still sending the previous print job." -msgstr "" +msgstr "Invio nuovi processi (temporaneamente) bloccato, invio in corso precedente processo di stampa." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:212 msgctxt "@info:status" msgid "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Impossibile inviare nuovo processo di stampa: questa stampante 3D non è (ancora) configurata per supportare la connessione di un gruppo di stampanti Ultimaker 3." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:425 #, python-brace-format msgctxt "@info:progress" msgid "Sending {file_name} to group {cluster_name}" -msgstr "" +msgstr "Invio {file_name} a gruppo {cluster_name}" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:498 #, python-brace-format msgctxt "@info:status" msgid "Sent {file_name} to group {cluster_name}." -msgstr "" +msgstr "Inviato {file_name} a gruppo {cluster_name}." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:503 msgctxt "@action:button" msgid "Show print jobs" -msgstr "" +msgstr "Mostra processi di stampa" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:504 msgctxt "@info:tooltip" msgid "Opens the print jobs interface in your browser." -msgstr "" +msgstr "Apre l'interfaccia processi di stampa sul browser." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:520 #, python-brace-format msgctxt "@info:status" msgid "Unable to send print job to group {cluster_name}." -msgstr "" +msgstr "Impossibile inviare processo di stampa a gruppo {cluster_name}." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:71 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "To ensure that your {machine_name} is equipped with the latest features it is recommended to update the firmware regularly. This can be done on the {machine_name} (when connected to the network) or via USB." -msgstr "" +msgstr "Per verificare che la vostra {machine_name} sia dotata delle funzionalità più recenti, si consiglia di aggiornare periodicamente il firmware. Questo può essere fatto sulla {machine_name} (quando connessa alla rete) o via USB." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:72 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s firmware available" -msgstr "" +msgstr "Nuovo firmware %s disponibile" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:73 #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:149 @@ -624,7 +624,7 @@ msgstr "Download" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:83 msgctxt "@info" msgid "Could not access update information." -msgstr "" +msgstr "Non è possibile accedere alle informazioni di aggiornamento." #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:199 msgctxt "@info:status" @@ -663,7 +663,7 @@ msgstr "Cura acquisisce dati statistici elaborati in forma anonima. L'acquisizio #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:46 msgctxt "@info:title" msgid "Collecting Data" -msgstr "" +msgstr "Acquisizione dati" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:48 msgctxt "@action:button" @@ -684,7 +684,7 @@ msgstr "File G-Code" #: /home/ruben/Projects/Cura/plugins/LayerView/__init__.py:13 msgctxt "@item:inlistbox" msgid "Layer view" -msgstr "" +msgstr "Visualizzazione strato" #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:93 msgctxt "@info:status" @@ -694,7 +694,7 @@ msgstr "Cura non visualizza in modo accurato gli strati se la funzione Wire Prin #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:94 msgctxt "@info:title" msgid "Layer View" -msgstr "" +msgstr "Visualizzazione strato" #: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" @@ -724,7 +724,7 @@ msgstr "Immagine GIF" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." -msgstr "" +msgstr "Impossibile eseguire il sezionamento con il materiale corrente in quanto incompatibile con la macchina o la configurazione selezionata." #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:297 @@ -732,7 +732,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:316 msgctxt "@info:title" msgid "Unable to slice" -msgstr "" +msgstr "Sezionamento impossibile" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:296 #, python-brace-format @@ -759,7 +759,7 @@ msgstr "Elaborazione dei livelli" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:238 msgctxt "@info:title" msgid "Information" -msgstr "" +msgstr "Informazioni" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" @@ -798,18 +798,18 @@ msgstr "Ugello" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:28 msgctxt "@menuitem" msgid "Browse plugins" -msgstr "" +msgstr "Sfoglia plugin" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:163 #, python-brace-format msgctxt "@info:status" msgid "Failed to get plugin ID from {0}" -msgstr "" +msgstr "Impossibile ottenere ID plugin da {0}" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:164 msgctxt "@info:tile" msgid "Warning" -msgstr "" +msgstr "Avvertenza" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:202 msgctxt "@window:title" @@ -819,7 +819,7 @@ msgstr "Browser plugin" #: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" -msgstr "" +msgstr "Visualizzazione compatta" #: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" @@ -835,7 +835,7 @@ msgstr "Parsing codice G" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:370 msgctxt "@info:title" msgid "G-code Details" -msgstr "" +msgstr "Dettagli codice G" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:368 msgctxt "@info:generic" @@ -917,7 +917,7 @@ msgstr "Supporto" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:95 msgctxt "@tooltip" msgid "Skirt" -msgstr "" +msgstr "Skirt" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:96 msgctxt "@tooltip" @@ -958,7 +958,7 @@ msgstr "Ricerca nuova posizione per gli oggetti" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:34 msgctxt "@info:title" msgid "Finding Location" -msgstr "" +msgstr "Ricerca posizione" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:89 #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 @@ -969,7 +969,7 @@ msgstr "Impossibile individuare una posizione nel volume di stampa per tutti gli #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:90 msgctxt "@info:title" msgid "Can't Find Location" -msgstr "" +msgstr "Impossibile individuare posizione" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:431 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:112 @@ -982,7 +982,7 @@ msgstr "Il file esiste già" #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" -msgstr "" +msgstr "Il file {0} esiste già. Sei sicuro di volerlo sovrascrivere?" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:815 msgctxt "@label" @@ -1003,7 +1003,7 @@ msgstr "Il materiale selezionato è incompatibile con la macchina o la configura #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:title" msgid "Incompatible Material" -msgstr "" +msgstr "Materiale incompatibile" #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:status Has a cancel button next to it." @@ -1024,24 +1024,24 @@ msgstr "Annulla modifica del diametro del materiale." #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" -msgstr "" +msgstr "Impossibile esportare il profilo su {0}: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:150 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." -msgstr "" +msgstr "Impossibile esportare il profilo su {0}: Rilevata anomalia durante scrittura plugin." #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:155 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" -msgstr "" +msgstr "Profilo esportato su {0}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 msgctxt "@info:title" msgid "Export Details" -msgstr "" +msgstr "Dettagli esportazione" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:182 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:204 @@ -1050,7 +1050,7 @@ msgstr "" #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to import profile from {0}: {1}" -msgstr "" +msgstr "Impossibile importare il profilo da {0}: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:215 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:251 @@ -1089,7 +1089,7 @@ msgstr "L’altezza del volume di stampa è stata ridotta a causa del valore del #: /home/ruben/Projects/Cura/cura/BuildVolume.py:102 msgctxt "@info:title" msgid "Build Volume" -msgstr "" +msgstr "Volume di stampa" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:34 msgctxt "@info:status" @@ -1100,7 +1100,7 @@ msgstr "Moltiplicazione e collocazione degli oggetti" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 msgctxt "@info:title" msgid "Placing Object" -msgstr "" +msgstr "Sistemazione oggetto" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:54 msgctxt "@title:window" @@ -1113,10 +1113,7 @@ msgid "" "

A fatal exception has occurred that we could not recover from!

\n" "

Please use the information below to post a bug report at http://github.com/Ultimaker/Cura/issues

\n" " " -msgstr "" -"

Si è verificata un'eccezione fatale che non stato possibile superare!

\n" -"

Utilizzare le informazioni sotto riportate per inviare un rapporto sull'errore a http://github.com/Ultimaker/Cura/issues

\n" -" " +msgstr "

Si è verificata un'eccezione fatale che non stato possibile superare!

\n

Utilizzare le informazioni sotto riportate per inviare un rapporto sull'errore a http://github.com/Ultimaker/Cura/issues

\n " #: /home/ruben/Projects/Cura/cura/CrashHandler.py:112 msgctxt "@action:button" @@ -1418,10 +1415,7 @@ msgid "" "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n" "\n" "Select your printer from the list below:" -msgstr "" -"Per stampare direttamente sulla stampante in rete, verificare che la stampante desiderata sia collegata alla rete mediante un cavo di rete o mediante collegamento alla rete WIFI. Se si collega Cura alla stampante, è comunque possibile utilizzare una chiavetta USB per trasferire i file codice G alla stampante.\n" -"\n" -"Selezionare la stampante dall’elenco seguente:" +msgstr "Per stampare direttamente sulla stampante in rete, verificare che la stampante desiderata sia collegata alla rete mediante un cavo di rete o mediante collegamento alla rete WIFI. Se si collega Cura alla stampante, è comunque possibile utilizzare una chiavetta USB per trasferire i file codice G alla stampante.\n\nSelezionare la stampante dall’elenco seguente:" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:75 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:75 @@ -1547,17 +1541,17 @@ msgstr "Attiva la configurazione" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:284 msgctxt "@label" msgid "This printer is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "Questa stampante non è configurata per supportare la connessione di un gruppo di stampanti Ultimaker 3" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:287 msgctxt "@label" msgid "This printer is the host for a group of %1 connected Ultimaker 3 printers" -msgstr "" +msgstr "Questa stampante fa da host per un gruppo di %1 stampanti Ultimaker 3 connesse" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:24 msgctxt "@title:window" msgid "Print over network" -msgstr "" +msgstr "Stampa sulla rete" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:92 msgctxt "@action:button" @@ -1567,98 +1561,98 @@ msgstr "Stampa" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:50 msgctxt "@label: arg 1 is group name" msgid "%1 is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "%1 non è configurata per supportare la connessione di un gruppo di stampanti Ultimaker 3" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:311 msgctxt "@label:status" msgid "Printing" -msgstr "" +msgstr "Stampa in corso" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:315 msgctxt "@label:status" msgid "Reserved" -msgstr "" +msgstr "Riservato" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:317 msgctxt "@label:status" msgid "Finished" -msgstr "" +msgstr "Terminato" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:320 msgctxt "@label:status" msgid "Preparing" -msgstr "" +msgstr "Preparazione in corso" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:327 msgctxt "@label:status" msgid "Available" -msgstr "" +msgstr "Disponibile" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:367 msgctxt "@label" msgid "Completed on: " -msgstr "" +msgstr "Completato su: " #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:371 msgctxt "@label" msgid "Clear build plate" -msgstr "" +msgstr "Cancellare piano di stampa" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:375 msgctxt "@label" msgid "Preparing to print" -msgstr "" +msgstr "Preparazione della stampa" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:379 msgctxt "@label" msgid "Not accepting print jobs" -msgstr "" +msgstr "Mancata accettazione processi di stampa" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:14 msgctxt "@info:tooltip" msgid "Opens the print jobs page with your default web browser." -msgstr "" +msgstr "Apre la pagina processi di stampa con il browser web predefinito." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:15 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:154 msgctxt "@action:button" msgid "View print jobs" -msgstr "" +msgstr "Visualizza processi di stampa" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:36 msgctxt "@label" msgid "PRINTER GROUP" -msgstr "" +msgstr "GRUPPO STAMPANTI" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:69 msgctxt "@title" msgid "Print jobs" -msgstr "" +msgstr "Processi di stampa" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:100 msgctxt "@label" msgid "Printing" -msgstr "" +msgstr "Stampa in corso" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:118 msgctxt "@label" msgid "Queued" -msgstr "" +msgstr "Coda di stampa" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:135 msgctxt "@label" msgid "Waiting for configuration change" -msgstr "" +msgstr "In attesa di modifica configurazione" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:194 msgctxt "@label:title" msgid "Printers" -msgstr "" +msgstr "Stampanti" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:247 msgctxt "@action:button" msgid "View printers" -msgstr "" +msgstr "Visualizza stampanti" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/ConfigDialog.qml:20 msgctxt "@title:window" @@ -2049,7 +2043,7 @@ msgstr "Installa" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:199 msgctxt "@title:window" msgid "Plugin License Agreement" -msgstr "" +msgstr "Accordo di licenza plugin" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:220 msgctxt "@label" @@ -2057,17 +2051,17 @@ msgid "" " plugin contains a license.\n" "You need to accept this license to install this plugin.\n" "Do you agree with the terms below?" -msgstr "" +msgstr " I plugin contengono una licenza.\nÈ necessario accettare questa licenza per poter installare il plugin.\nAccetti i termini sotto riportati?" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:242 msgctxt "@action:button" msgid "Accept" -msgstr "" +msgstr "Accetto" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:253 msgctxt "@action:button" msgid "Decline" -msgstr "" +msgstr "Non accetto" #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml:25 #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:25 @@ -2322,9 +2316,7 @@ msgctxt "@text:window" msgid "" "You have customized some profile settings.\n" "Would you like to keep or discard those settings?" -msgstr "" -"Sono state personalizzate alcune impostazioni del profilo.\n" -"Mantenere o eliminare tali impostazioni?" +msgstr "Sono state personalizzate alcune impostazioni del profilo.\nMantenere o eliminare tali impostazioni?" #: /home/ruben/Projects/Cura/resources/qml/DiscardOrKeepProfileChangesDialog.qml:110 msgctxt "@title:column" @@ -2908,12 +2900,12 @@ msgstr "Importa materiale" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:320 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" -msgstr "" +msgstr "Impossibile importare materiale {1}: %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:324 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" -msgstr "" +msgstr "Materiale importato correttamente %1" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:343 #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:358 @@ -2924,12 +2916,12 @@ msgstr "Esporta materiale" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:362 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" -msgstr "" +msgstr "Impossibile esportare il materiale su %1: %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:368 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" -msgstr "" +msgstr "Materiale esportato correttamente su %1" #: /home/ruben/Projects/Cura/resources/qml/AddMachineDialog.qml:18 #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:766 @@ -2962,9 +2954,7 @@ msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" -msgstr "" -"Cura è stato sviluppato da Ultimaker B.V. in cooperazione con la comunità.\n" -"Cura è orgogliosa di utilizzare i seguenti progetti open source:" +msgstr "Cura è stato sviluppato da Ultimaker B.V. in cooperazione con la comunità.\nCura è orgogliosa di utilizzare i seguenti progetti open source:" #: /home/ruben/Projects/Cura/resources/qml/AboutDialog.qml:118 msgctxt "@label" @@ -3067,10 +3057,7 @@ msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." -msgstr "" -"Alcuni valori di impostazione/esclusione sono diversi dai valori memorizzati nel profilo.\n" -"\n" -"Fare clic per aprire la gestione profili." +msgstr "Alcuni valori di impostazione/esclusione sono diversi dai valori memorizzati nel profilo.\n\nFare clic per aprire la gestione profili." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:145 msgctxt "@label:textbox" @@ -3108,10 +3095,7 @@ msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." -msgstr "" -"Alcune impostazioni nascoste utilizzano valori diversi dal proprio valore normale calcolato.\n" -"\n" -"Fare clic per rendere visibili queste impostazioni." +msgstr "Alcune impostazioni nascoste utilizzano valori diversi dal proprio valore normale calcolato.\n\nFare clic per rendere visibili queste impostazioni." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:62 msgctxt "@label Header for list of settings." @@ -3139,10 +3123,7 @@ msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." -msgstr "" -"Questa impostazione ha un valore diverso dal profilo.\n" -"\n" -"Fare clic per ripristinare il valore del profilo." +msgstr "Questa impostazione ha un valore diverso dal profilo.\n\nFare clic per ripristinare il valore del profilo." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:284 msgctxt "@label" @@ -3150,10 +3131,7 @@ msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." -msgstr "" -"Questa impostazione normalmente viene calcolata, ma attualmente ha impostato un valore assoluto.\n" -"\n" -"Fare clic per ripristinare il valore calcolato." +msgstr "Questa impostazione normalmente viene calcolata, ma attualmente ha impostato un valore assoluto.\n\nFare clic per ripristinare il valore calcolato." #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:118 msgctxt "@label:listbox" @@ -3165,9 +3143,7 @@ msgctxt "@label:listbox" msgid "" "Print Setup disabled\n" "G-code files cannot be modified" -msgstr "" -"Impostazione di stampa disabilitata\n" -"I file codice G non possono essere modificati" +msgstr "Impostazione di stampa disabilitata\nI file codice G non possono essere modificati" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:326 msgctxt "@label" @@ -3177,22 +3153,22 @@ msgstr "00h 00min" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:344 msgctxt "@tooltip" msgid "Time information" -msgstr "" +msgstr "Informazioni su tempo" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:370 msgctxt "@description" msgid "Print time" -msgstr "" +msgstr "Tempo di stampa" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:409 msgctxt "@label" msgid "%1m / ~ %2g / ~ %4 %3" -msgstr "" +msgstr "%1m / ~ %2g / ~ %4 %3" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:414 msgctxt "@label" msgid "%1m / ~ %2g" -msgstr "" +msgstr "%1m / ~ %2g" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:476 msgctxt "@tooltip" @@ -3252,12 +3228,12 @@ msgstr "Nessuna stampante collegata" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:157 msgctxt "@label" msgid "Extruder" -msgstr "" +msgstr "Estrusore" #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:120 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." -msgstr "" +msgstr "Temperatura target dell'estremità riscaldata. L'estremità riscaldata si riscalderà o raffredderà sino a questo valore di temperatura. Se questo è 0, l'estremità riscaldata verrà spenta." #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:152 msgctxt "@tooltip" @@ -3726,27 +3702,27 @@ msgstr "Prepara" #: /home/ruben/Projects/Cura/resources/qml/Topbar.qml:79 msgctxt "@title:tab" msgid "Monitor" -msgstr "" +msgstr "Controlla" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:50 msgctxt "@label" msgid "Layer Height" -msgstr "" +msgstr "Altezza dello strato" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:62 msgctxt "@label" msgid "Print Speed" -msgstr "" +msgstr "Velocità di stampa" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:73 msgctxt "@label" msgid "Slower" -msgstr "" +msgstr "Più lenta" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:85 msgctxt "@label" msgid "Faster" -msgstr "" +msgstr "Più veloce" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:416 msgctxt "@label" @@ -3761,7 +3737,7 @@ msgstr "Un riempimento graduale aumenterà gradualmente la quantità di riempime #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:602 msgctxt "@label" msgid "Enable gradual" -msgstr "" +msgstr "Consenti variazione graduale" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:668 msgctxt "@label" @@ -3838,7 +3814,7 @@ msgstr "Materiale" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:374 msgctxt "@label" msgid "Check material compatibility" -msgstr "" +msgstr "Controllo compatibilità materiale" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:394 msgctxt "@tooltip" @@ -3898,12 +3874,12 @@ msgstr "Modalità God" #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box." -msgstr "" +msgstr "Accetta i G-Code e li invia tramite WiFi a un Doodle3D WiFi-Box." #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "name" msgid "Doodle3D WiFi-Box" -msgstr "" +msgstr "Doodle3D WiFi-Box" #: ChangeLogPlugin/plugin.json msgctxt "description" @@ -3958,17 +3934,17 @@ msgstr "Connessione di rete UM3" #: CuraPrintClusterUpload/plugin.json msgctxt "name" msgid "UM3 Network Connection (Cluster)" -msgstr "" +msgstr "Connessione di rete UM3 (Cluster)" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." -msgstr "" +msgstr "Controlla disponibilità di aggiornamenti firmware." #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" -msgstr "" +msgstr "Controllo aggiornamento firmware" #: CuraSolidWorksPlugin/plugin.json msgctxt "description" @@ -4063,12 +4039,12 @@ msgstr "Aggiornamento della versione da 2.5 a 2.6" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." -msgstr "" +msgstr "Aggiorna le configurazioni da Cura 2.7 a Cura 3.0." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" -msgstr "" +msgstr "Aggiornamento della versione da 2.7 a 3.0" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" @@ -4972,4 +4948,4 @@ msgstr "Lettore profilo Cura" #~ msgctxt "@label:" #~ msgid "Print Again" -#~ msgstr "Ripeti stampa" +#~ msgstr "Ripeti stampa" \ No newline at end of file diff --git a/resources/i18n/it_IT/fdmprinter.def.json.po b/resources/i18n/it_IT/fdmprinter.def.json.po index 49577d5ead..d618ecfeac 100644 --- a/resources/i18n/it_IT/fdmprinter.def.json.po +++ b/resources/i18n/it_IT/fdmprinter.def.json.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:31+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: Italian\n" "Language: it_IT\n" @@ -56,9 +56,7 @@ msgctxt "machine_start_gcode description" msgid "" "Gcode commands to be executed at the very start - separated by \n" "." -msgstr "" -"I comandi codice G da eseguire all’avvio, separati da \n" -"." +msgstr "I comandi codice G da eseguire all’avvio, separati da \n." #: fdmprinter.def.json msgctxt "machine_end_gcode label" @@ -70,9 +68,7 @@ msgctxt "machine_end_gcode description" msgid "" "Gcode commands to be executed at the very end - separated by \n" "." -msgstr "" -"I comandi codice G da eseguire alla fine, separati da \n" -"." +msgstr "I comandi codice G da eseguire alla fine, separati da \n." #: fdmprinter.def.json msgctxt "material_guid label" @@ -1122,7 +1118,7 @@ msgstr "Casuale" #: fdmprinter.def.json msgctxt "z_seam_type option sharpest_corner" msgid "Sharpest Corner" -msgstr "" +msgstr "Angolo più acuto" #: fdmprinter.def.json msgctxt "z_seam_x label" @@ -1147,32 +1143,32 @@ msgstr "La coordinata Y della posizione in prossimità della quale si innesca al #: fdmprinter.def.json msgctxt "z_seam_corner label" msgid "Seam Corner Preference" -msgstr "" +msgstr "Preferenze angolo giunzione" #: fdmprinter.def.json msgctxt "z_seam_corner description" msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner." -msgstr "" +msgstr "Controlla se gli angoli sul profilo del modello influenzano la posizione della giunzione. Nessuno significa che gli angoli non hanno alcuna influenza sulla posizione della giunzione. Nascondi giunzione favorisce la presenza della giunzione su un angolo interno. Esponi giunzione favorisce la presenza della giunzione su un angolo esterno. Nascondi o esponi giunzione favorisce la presenza della giunzione su un angolo interno o esterno." #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_none" msgid "None" -msgstr "" +msgstr "Nessuno" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_inner" msgid "Hide Seam" -msgstr "" +msgstr "Nascondi giunzione" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" -msgstr "" +msgstr "Esponi giunzione" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_any" msgid "Hide or Expose Seam" -msgstr "" +msgstr "Nascondi o esponi giunzione" #: fdmprinter.def.json msgctxt "z_seam_relative label" @@ -1252,7 +1248,7 @@ msgstr "Configurazione di riempimento" #: fdmprinter.def.json msgctxt "infill_pattern description" msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, cubic, octet, quarter cubic and concentric patterns are fully printed every layer. Cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction." -msgstr "" +msgstr "Configurazione del materiale di riempimento della stampa. Il riempimento a linea e zig zag su strati alternati riduce il costo del materiale. Le configurazioni a griglia, triangolo, a cubo, ottagonale, a quarto di cubo e concentrica comportano la stampa completa in ogni strato. Il riempimento a cubi, a quarto di cubo e a ottagonale cambia a ogni strato per consentire una distribuzione più uniforme della resistenza in ogni direzione." #: fdmprinter.def.json msgctxt "infill_pattern option grid" @@ -1282,12 +1278,12 @@ msgstr "Suddivisione in cubi" #: fdmprinter.def.json msgctxt "infill_pattern option tetrahedral" msgid "Octet" -msgstr "" +msgstr "Ottagonale" #: fdmprinter.def.json msgctxt "infill_pattern option quarter_cubic" msgid "Quarter Cubic" -msgstr "" +msgstr "Quarto di cubo" #: fdmprinter.def.json msgctxt "infill_pattern option concentric" @@ -1307,22 +1303,22 @@ msgstr "Zig Zag" #: fdmprinter.def.json msgctxt "infill_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Incrociata" #: fdmprinter.def.json msgctxt "infill_pattern option cross_3d" msgid "Cross 3D" -msgstr "" +msgstr "Incrociata 3D" #: fdmprinter.def.json msgctxt "zig_zaggify_infill label" msgid "Connect Infill Lines" -msgstr "" +msgstr "Collegamento delle linee di riempimento" #: fdmprinter.def.json msgctxt "zig_zaggify_infill description" msgid "Connect the ends where the infill pattern meets the inner wall using a lines which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduces the effects on infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used." -msgstr "" +msgstr "Collega le estremità in cui la configurazione del riempimento incontra la parete interna utilizzando linee che seguono il profilo della parete interna stessa. Consentendo tale configurazione è possibile fare in modo che il riempimento aderisca meglio alle pareti riducendo gli effetti dello stesso sulla qualità delle superfici verticali. Disabilitando questa configurazione si riduce la quantità di materiale utilizzato." #: fdmprinter.def.json msgctxt "infill_angles label" @@ -1447,32 +1443,32 @@ msgstr "Non generare aree di riempimento inferiori a questa (piuttosto usare il #: fdmprinter.def.json msgctxt "skin_preshrink label" msgid "Skin Removal Width" -msgstr "" +msgstr "Larghezza rimozione rivestimento" #: fdmprinter.def.json msgctxt "skin_preshrink description" msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "Larghezza massima delle aree di rivestimento che è possibile rimuovere. Ogni area di rivestimento più piccola di questo valore verrà eliminata. Questo può aiutare a limitare il tempo e il materiale necessari per la stampa del rivestimento superiore/inferiore sulle superfici inclinate del modello." #: fdmprinter.def.json msgctxt "top_skin_preshrink label" msgid "Top Skin Removal Width" -msgstr "" +msgstr "Larghezza rimozione rivestimento superiore" #: fdmprinter.def.json msgctxt "top_skin_preshrink description" msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model." -msgstr "" +msgstr "Larghezza massima delle aree di rivestimento superiore che è possibile rimuovere. Ogni area di rivestimento più piccola di questo valore verrà eliminata. Questo può aiutare a limitare il tempo e il materiale necessari per la stampa del rivestimento superiore sulle superfici inclinate del modello." #: fdmprinter.def.json msgctxt "bottom_skin_preshrink label" msgid "Bottom Skin Removal Width" -msgstr "" +msgstr "Larghezza rimozione rivestimento inferiore" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink description" msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "Larghezza massima delle aree di rivestimento inferiore che è possibile rimuovere. Ogni area di rivestimento più piccola di questo valore verrà eliminata. Questo può aiutare a limitare il tempo e il materiale necessari per la stampa del rivestimento inferiore sulle superfici inclinate del modello." #: fdmprinter.def.json msgctxt "expand_skins_expand_distance label" @@ -1482,27 +1478,27 @@ msgstr "Distanza prolunga rivestimento esterno" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance description" msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "Distanza per cui i rivestimenti si estendono nel riempimento. Valori maggiori migliorano l'aderenza del rivestimento al riempimento e consentono una migliore aderenza al rivestimento delle pareti degli strati adiacenti. Valori minori consentono di risparmiare sul materiale utilizzato." #: fdmprinter.def.json msgctxt "top_skin_expand_distance label" msgid "Top Skin Expand Distance" -msgstr "" +msgstr "Distanza prolunga rivestimento superiore" #: fdmprinter.def.json msgctxt "top_skin_expand_distance description" msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "Distanza per cui i rivestimenti superiori si estendono nel riempimento. Valori maggiori migliorano l'aderenza del rivestimento al riempimento e consentono una migliore aderenza al rivestimento delle pareti dello strato superiore. Valori minori consentono di risparmiare sul materiale utilizzato." #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance label" msgid "Bottom Skin Expand Distance" -msgstr "" +msgstr "Distanza prolunga rivestimento inferiore" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance description" msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used." -msgstr "" +msgstr "Distanza per cui i rivestimenti inferiori si estendono nel riempimento. Valori maggiori migliorano l'aderenza del rivestimento al riempimento e consentono una migliore aderenza al rivestimento delle pareti dello strato inferiore. Valori minori consentono di risparmiare sul materiale utilizzato." #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion label" @@ -2822,7 +2818,7 @@ msgstr "Zig Zag" #: fdmprinter.def.json msgctxt "support_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Incrociata" #: fdmprinter.def.json msgctxt "support_connect_zigzags label" @@ -2837,32 +2833,32 @@ msgstr "Collega i ZigZag. Questo aumenta la forza della struttura di supporto a #: fdmprinter.def.json msgctxt "support_skip_some_zags label" msgid "Break Up Support In Chunks" -msgstr "" +msgstr "Rottura del supporto in pezzi di grandi dimensioni" #: fdmprinter.def.json msgctxt "support_skip_some_zags description" msgid "Skip some support line connections to make the support structure easier to break away. This setting is applicable to the Zig Zag support infill pattern." -msgstr "" +msgstr "Salto di alcuni collegamenti per rendere la struttura del supporto più facile da rompere. Questa impostazione è applicabile alla configurazione a zig-zag del riempimento del supporto." #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm label" msgid "Support Chunk Size" -msgstr "" +msgstr "Dimensioni frammento supporto" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm description" msgid "Leave out a connection between support lines once every N millimeter to make the support structure easier to break away." -msgstr "" +msgstr "Lasciare un collegamento tra le linee del supporto ogni N millimetri per facilitare la rottura del supporto stesso." #: fdmprinter.def.json msgctxt "support_zag_skip_count label" msgid "Support Chunk Line Count" -msgstr "" +msgstr "Conteggio linee di rottura supporto" #: fdmprinter.def.json msgctxt "support_zag_skip_count description" msgid "Skip one in every N connection lines to make the support structure easier to break away." -msgstr "" +msgstr "Salto di una ogni N linee di collegamento per rendere la struttura del supporto più facile da rompere." #: fdmprinter.def.json msgctxt "support_infill_rate label" @@ -3404,9 +3400,7 @@ msgctxt "skirt_gap description" msgid "" "The horizontal distance between the skirt and the first layer of the print.\n" "This is the minimum distance, multiple skirt lines will extend outwards from this distance." -msgstr "" -"Indica la distanza orizzontale tra lo skirt ed il primo strato della stampa.\n" -"Questa è la distanza minima, più linee di skirt aumenteranno tale distanza." +msgstr "Indica la distanza orizzontale tra lo skirt ed il primo strato della stampa.\nQuesta è la distanza minima, più linee di skirt aumenteranno tale distanza." #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length label" @@ -3451,22 +3445,22 @@ msgstr "Stampa il brim solo sull’esterno del modello. Questo riduce la quantit #: fdmprinter.def.json msgctxt "z_offset_layer_0 label" msgid "Initial Layer Z Offset" -msgstr "" +msgstr "Scostamento Z strato iniziale" #: fdmprinter.def.json msgctxt "z_offset_layer_0 description" msgid "The extruder is offset from the normal height of the first layer by this amount. It can be positive (raised) or negative (lowered). Some filament types adhere to the build plate better if the extruder is raised slightly." -msgstr "" +msgstr "L'estrusore viene posizionato ad una distanza dall'altezza normale del primo strato pari al valore indicato. Questo scostamento può essere positivo (più in alto) o negativo (più in basso). Alcuni tipi di filamento aderiscono meglio al piano di stampa se l'estrusore viene leggermente sollevato." #: fdmprinter.def.json msgctxt "z_offset_taper_layers label" msgid "Z Offset Taper Layers" -msgstr "" +msgstr "Scostamento Z strati di rastremazione" #: fdmprinter.def.json msgctxt "z_offset_taper_layers description" msgid "When non-zero, the Z offset is reduced to 0 over that many layers. A value of 0 means that the Z offset remains constant for all the layers in the print." -msgstr "" +msgstr "Se diverso da zero, lo scostamento Z viene ridotto a 0 entro il numero di strati indicato. Un valore di 0 indica che lo scostamento Z rimane costante per tutti gli strati di stampa." #: fdmprinter.def.json msgctxt "raft_margin label" @@ -3481,12 +3475,12 @@ msgstr "Se è abilitata la funzione raft, questo valore indica di quanto il raft #: fdmprinter.def.json msgctxt "raft_smoothing label" msgid "Raft Smoothing" -msgstr "" +msgstr "Smoothing raft" #: fdmprinter.def.json msgctxt "raft_smoothing description" msgid "This setting control how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle." -msgstr "" +msgstr "Questa impostazione controlla l'entità dell'arrotondamento degli angoli interni sul profilo raft. Gli angoli interni vengono arrotondati a semicerchio con un raggio pari al valore indicato. Questa impostazione elimina inoltre i fori sul profilo raft più piccoli di tale cerchio." #: fdmprinter.def.json msgctxt "raft_airgap label" @@ -4166,12 +4160,12 @@ msgstr "Leviga i profili con movimento spiraliforme per ridurre la visibilità d #: fdmprinter.def.json msgctxt "relative_extrusion label" msgid "Relative Extrusion" -msgstr "" +msgstr "Estrusione relativa" #: fdmprinter.def.json msgctxt "relative_extrusion description" msgid "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the Gcode. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any Gcode script is output." -msgstr "" +msgstr "Utilizza l'estrusione relativa invece di quella assoluta. L'utilizzo di fasi E relative facilita la post-elaborazione del codice G. Tuttavia, questa impostazione non è supportata da tutte le stampanti e può causare deviazioni molto piccole nella quantità di materiale depositato rispetto alle fasi E assolute. Indipendentemente da questa impostazione, la modalità estrusione sarà sempre impostata su assoluta prima che venga generato uno script in codice G." #: fdmprinter.def.json msgctxt "experimental label" @@ -4186,12 +4180,12 @@ msgstr "sperimentale!" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" -msgstr "" +msgstr "Ottimizzazione sequenza di stampa pareti" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order description" msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization." -msgstr "" +msgstr "Ottimizza l'ordine in cui vengono stampate le pareti in modo da ridurre le retrazioni e la distanza percorsa. L'abilitazione di questa funzione porta vantaggi per la maggior parte dei pezzi, ma alcuni potrebbero richiedere un maggior tempo di esecuzione, per cui si consiglia di confrontare i tempi di stampa stimati con e senza ottimizzazione." #: fdmprinter.def.json msgctxt "draft_shield_enabled label" @@ -4316,22 +4310,22 @@ msgstr "Alterna la direzione di stampa degli strati superiori/inferiori. Normalm #: fdmprinter.def.json msgctxt "cross_infill_pocket_size label" msgid "Cross 3D Pocket Size" -msgstr "" +msgstr "Dimensioni cavità 3D incrociata" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size description" msgid "The size of pockets at four-way crossings in the cross 3D pattern at heights where the pattern is touching itself." -msgstr "" +msgstr "Dimensioni delle cavità negli incroci a quattro vie nella configurazione 3D incrociata alle altezze a cui la configurazione tocca se stessa." #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly label" msgid "Alternate Cross 3D Pockets" -msgstr "" +msgstr "Cavità 3D incrociate alternate" #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly description" msgid "Only apply pockets at half of the four-way crossings in the cross 3D pattern and alternate the location of the pockets between heights where the pattern is touching itself." -msgstr "" +msgstr "Si applica solo a cavità a metà degli incroci a quattro vie nella configurazione 3D incrociata e alterna la posizione delle cavità tra le altezze in cui la configurazione tocca se stessa." #: fdmprinter.def.json msgctxt "spaghetti_infill_enabled label" @@ -4633,9 +4627,7 @@ msgctxt "wireframe_up_half_speed description" msgid "" "Distance of an upward move which is extruded with half speed.\n" "This can cause better adhesion to previous layers, while not heating the material in those layers too much. Only applies to Wire Printing." -msgstr "" -"Indica la distanza di uno spostamento verso l'alto con estrusione a velocità dimezzata.\n" -"Ciò può garantire una migliore adesione agli strati precedenti, senza eccessivo riscaldamento del materiale su questi strati. Applicabile solo alla funzione Wire Printing." +msgstr "Indica la distanza di uno spostamento verso l'alto con estrusione a velocità dimezzata.\nCiò può garantire una migliore adesione agli strati precedenti, senza eccessivo riscaldamento del materiale su questi strati. Applicabile solo alla funzione Wire Printing." #: fdmprinter.def.json msgctxt "wireframe_top_jump label" @@ -4755,12 +4747,12 @@ msgstr "Ulteriore passaggio sopra la superficie superiore, senza estrusione di m #: fdmprinter.def.json msgctxt "ironing_only_highest_layer label" msgid "Iron Only Highest Layer" -msgstr "" +msgstr "Stiramento del solo strato più elevato" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer description" msgid "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish." -msgstr "" +msgstr "Effettua lo stiramento solo dell'ultimissimo strato della maglia. È possibile quindi risparmiare tempo se gli strati inferiori non richiedono una finitura con superficie liscia." #: fdmprinter.def.json msgctxt "ironing_pattern label" @@ -5124,4 +5116,4 @@ msgstr "Matrice di rotazione da applicare al modello quando caricato dal file." #~ msgctxt "multiple_mesh_overlap label" #~ msgid "Dual Extrusion Overlap" -#~ msgstr "Sovrapposizione doppia estrusione" +#~ msgstr "Sovrapposizione doppia estrusione" \ No newline at end of file diff --git a/resources/i18n/nl_NL/cura.po b/resources/i18n/nl_NL/cura.po index 0581d8209e..2444bf6a4c 100644 --- a/resources/i18n/nl_NL/cura.po +++ b/resources/i18n/nl_NL/cura.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:30+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: Dutch\n" "Language: nl_NL\n" @@ -24,7 +24,7 @@ msgstr "Machine-instellingen" #: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" -msgstr "" +msgstr "Röntgenweergave" #: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" @@ -39,17 +39,17 @@ msgstr "G-code-bestand" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:65 msgctxt "@action:button" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Printen via Doodle3D WiFi-Box" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:66 msgctxt "@properties:tooltip" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Printen via Doodle3D WiFi-Box" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:86 msgctxt "@info:status" msgid "Connecting to Doodle3D Connect" -msgstr "" +msgstr "Verbinding maken met Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:87 #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:155 @@ -73,32 +73,32 @@ msgstr "Annuleren" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:154 msgctxt "@info:status" msgid "Sending data to Doodle3D Connect" -msgstr "" +msgstr "De gegevens worden naar Doodle3D Connect verzonden" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:161 msgctxt "@info:status" msgid "Unable to send data to Doodle3D Connect. Is another job still active?" -msgstr "" +msgstr "Kan geen gegevens naar Doodle3D Connect verzenden. Is er nog een andere taak actief?" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:175 msgctxt "@info:status" msgid "Storing data on Doodle3D Connect" -msgstr "" +msgstr "Gegevens op Doodle3D Connect opslaan" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:213 msgctxt "@info:status" msgid "File sent to Doodle3D Connect" -msgstr "" +msgstr "Het bestand is naar Doodle3D Connect verzonden" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@action:button" msgid "Open Connect.." -msgstr "" +msgstr "Connect openen" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@info:tooltip" msgid "Open the Doodle3D Connect web interface" -msgstr "" +msgstr "De Doodle3D Connect-webinterface openen" #: /home/ruben/Projects/Cura/plugins/ChangeLogPlugin/ChangeLog.py:35 msgctxt "@item:inmenu" @@ -143,7 +143,7 @@ msgstr "Er kan geen nieuwe taak worden gestart omdat de printer bezig is of niet #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:153 msgctxt "@info:title" msgid "Print Details" -msgstr "" +msgstr "Printgegevens" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:status" @@ -153,7 +153,7 @@ msgstr "De printer biedt geen ondersteuning voor USB-printen omdat deze de codev #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:title" msgid "USB Printing" -msgstr "" +msgstr "USB-printen" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:460 msgctxt "@info:status" @@ -168,7 +168,7 @@ msgstr "Er kan geen nieuwe taak worden gestart omdat de printer geen ondersteuni #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1296 msgctxt "@info:title" msgid "Warning" -msgstr "" +msgstr "Waarschuwing" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:108 msgctxt "@info" @@ -184,7 +184,7 @@ msgstr "De voor de printer benodigde software is niet op %s te vinden." #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:122 msgctxt "@info:title" msgid "Printer Firmware" -msgstr "" +msgstr "Firmware van uw printer" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." @@ -201,25 +201,25 @@ msgstr "Opslaan op Verwisselbaar Station {0}" #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" -msgstr "" +msgstr "Opslaan op Verwisselbaar Station {0}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:89 msgctxt "@info:title" msgid "Saving" -msgstr "" +msgstr "Opslaan" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:99 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:102 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" -msgstr "" +msgstr "Kan niet opslaan als {0}: {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:118 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." -msgstr "" +msgstr "Kan geen bestandsnaam vinden tijdens het schrijven naar {device}." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:131 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146 @@ -236,7 +236,7 @@ msgstr "Kan niet opslaan op verwisselbaar station {0}: {1}" #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1305 msgctxt "@info:title" msgid "Error" -msgstr "" +msgstr "Fout" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 #, python-brace-format @@ -247,7 +247,7 @@ msgstr "Opgeslagen op Verwisselbaar Station {0} als {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 msgctxt "@info:title" msgid "File Saved" -msgstr "" +msgstr "Bestand opgeslagen" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 msgctxt "@action:button" @@ -269,7 +269,7 @@ msgstr "{0} is uitgeworpen. U kunt het station nu veilig verwijderen." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:156 msgctxt "@info:title" msgid "Safely Remove Hardware" -msgstr "" +msgstr "Hardware veilig verwijderen" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:158 #, python-brace-format @@ -304,7 +304,7 @@ msgstr "Er is een toegangsaanvraag voor de printer verstuurd. Keur de aanvraag g #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:157 msgctxt "@info:title" msgid "Connection status" -msgstr "" +msgstr "Verbindingsstatus" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:158 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:158 @@ -319,7 +319,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:500 msgctxt "@info:title" msgid "Connection Status" -msgstr "" +msgstr "Verbindingsstatus" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:159 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:159 @@ -417,7 +417,7 @@ msgstr "Er kan geen nieuwe taak worden gestart omdat de printer bezig is. De hui #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:650 msgctxt "@info:title" msgid "Printer Status" -msgstr "" +msgstr "Printerstatus" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:674 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:660 @@ -488,7 +488,7 @@ msgstr "De gegevens worden naar de printer verzonden" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:839 msgctxt "@info:title" msgid "Sending Data" -msgstr "" +msgstr "Gegevens Verzenden" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:908 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:890 @@ -547,73 +547,73 @@ msgstr "Verbinding Maken via Netwerk" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:103 msgid "This printer is not set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Deze printer is niet ingesteld voor het hosten van een groep aangesloten Ultimaker 3-printers." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:104 #, python-brace-format msgctxt "Count is number of printers." msgid "This printer is the host for a group of {count} connected Ultimaker 3 printers." -msgstr "" +msgstr "Deze printer is de host voor een groep van {count} aangesloten Ultimaker 3-printers." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:105 #, python-brace-format msgid "{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate." -msgstr "" +msgstr "{printer_name} heeft '{job_name}' voltooid. Haal de print op en bevestig dat het platform is leeggemaakt." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:106 #, python-brace-format msgid "{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing." -msgstr "" +msgstr "{printer_name} is gereserveerd voor het printen van '{job_name}'. Wijzig de instellingen van de printer zodanig dat ze aansluiten bij de taak, zodat u kunt beginnen met printen." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:196 msgctxt "@info:status" msgid "Sending new jobs (temporarily) blocked, still sending the previous print job." -msgstr "" +msgstr "Het verzenden van nieuwe taken is (tijdelijk) geblokkeerd. Nog bezig met het verzenden van de vorige printtaak." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:212 msgctxt "@info:status" msgid "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Kan geen nieuwe printtaak verzenden: deze 3D-printer is (nog) niet ingesteld voor het hosten van een groep aangesloten Ultimaker 3-printers." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:425 #, python-brace-format msgctxt "@info:progress" msgid "Sending {file_name} to group {cluster_name}" -msgstr "" +msgstr "Bezig met verzenden van {file_name} naar groep {cluster_name}" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:498 #, python-brace-format msgctxt "@info:status" msgid "Sent {file_name} to group {cluster_name}." -msgstr "" +msgstr "{file_name} is verzonden naar groep {cluster_name}." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:503 msgctxt "@action:button" msgid "Show print jobs" -msgstr "" +msgstr "Printtaken weergeven" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:504 msgctxt "@info:tooltip" msgid "Opens the print jobs interface in your browser." -msgstr "" +msgstr "Opent de printtaken-interface in uw browser." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:520 #, python-brace-format msgctxt "@info:status" msgid "Unable to send print job to group {cluster_name}." -msgstr "" +msgstr "Kan de printtaak niet naar groep {cluster_name} verzenden." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:71 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "To ensure that your {machine_name} is equipped with the latest features it is recommended to update the firmware regularly. This can be done on the {machine_name} (when connected to the network) or via USB." -msgstr "" +msgstr "Om ervoor te zorgen dat uw {machine_name} van de nieuwste functies is voorzien, wordt aanbevolen om de firmware regelmatig bij te werken. U kunt dit doen op de {machine_name} (wanneer deze is verbonden met het netwerk) of via USB." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:72 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s firmware available" -msgstr "" +msgstr "Nieuwe firmware voor %s beschikbaar" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:73 #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:149 @@ -624,7 +624,7 @@ msgstr "Downloaden" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:83 msgctxt "@info" msgid "Could not access update information." -msgstr "" +msgstr "Geen toegang tot update-informatie." #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:199 msgctxt "@info:status" @@ -663,7 +663,7 @@ msgstr "Cura verzamelt geanonimiseerde slicing-statistieken. Dit kan bij de voor #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:46 msgctxt "@info:title" msgid "Collecting Data" -msgstr "" +msgstr "Gegevens verzamelen" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:48 msgctxt "@action:button" @@ -684,7 +684,7 @@ msgstr "G-code-bestand" #: /home/ruben/Projects/Cura/plugins/LayerView/__init__.py:13 msgctxt "@item:inlistbox" msgid "Layer view" -msgstr "" +msgstr "Laagweergave" #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:93 msgctxt "@info:status" @@ -694,7 +694,7 @@ msgstr "Als draadprinten is ingeschakeld, geeft Cura lagen niet nauwkeurig weer" #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:94 msgctxt "@info:title" msgid "Layer View" -msgstr "" +msgstr "Laagweergave" #: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" @@ -724,7 +724,7 @@ msgstr "GIF-afbeelding" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." -msgstr "" +msgstr "Met het huidige materiaal is slicen niet mogelijk, omdat het materiaal niet compatibel is met de geselecteerde machine of configuratie." #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:297 @@ -732,7 +732,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:316 msgctxt "@info:title" msgid "Unable to slice" -msgstr "" +msgstr "Kan niet slicen" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:296 #, python-brace-format @@ -759,7 +759,7 @@ msgstr "Lagen verwerken" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:238 msgctxt "@info:title" msgid "Information" -msgstr "" +msgstr "Informatie" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" @@ -798,18 +798,18 @@ msgstr "Nozzle" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:28 msgctxt "@menuitem" msgid "Browse plugins" -msgstr "" +msgstr "Door invoegtoepassingen bladeren" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:163 #, python-brace-format msgctxt "@info:status" msgid "Failed to get plugin ID from {0}" -msgstr "" +msgstr "Kan de invoegtoepassing-ID van {0} niet vinden" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:164 msgctxt "@info:tile" msgid "Warning" -msgstr "" +msgstr "Waarschuwing" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:202 msgctxt "@window:title" @@ -819,7 +819,7 @@ msgstr "Invoegtoepassingbrowser" #: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" -msgstr "" +msgstr "Solide weergave" #: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" @@ -835,7 +835,7 @@ msgstr "G-code parseren" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:370 msgctxt "@info:title" msgid "G-code Details" -msgstr "" +msgstr "Details van de G-code" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:368 msgctxt "@info:generic" @@ -917,7 +917,7 @@ msgstr "Supportstructuur" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:95 msgctxt "@tooltip" msgid "Skirt" -msgstr "" +msgstr "Skirt" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:96 msgctxt "@tooltip" @@ -958,7 +958,7 @@ msgstr "Nieuwe locatie vinden voor objecten" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:34 msgctxt "@info:title" msgid "Finding Location" -msgstr "" +msgstr "Locatie vinden" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:89 #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 @@ -969,7 +969,7 @@ msgstr "Kan binnen het werkvolume niet voor alle objecten een locatie vinden" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:90 msgctxt "@info:title" msgid "Can't Find Location" -msgstr "" +msgstr "Kan locatie niet vinden" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:431 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:112 @@ -982,7 +982,7 @@ msgstr "Het Bestand Bestaat Al" #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" -msgstr "" +msgstr "Het bestand {0} bestaat al. Weet u zeker dat u dit bestand wilt overschrijven?" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:815 msgctxt "@label" @@ -1003,7 +1003,7 @@ msgstr "Het geselecteerde materiaal is niet compatibel met de geselecteerde mach #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:title" msgid "Incompatible Material" -msgstr "" +msgstr "Niet-compatibel materiaal" #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:status Has a cancel button next to it." @@ -1024,24 +1024,24 @@ msgstr "Maak wijzigen van de materiaaldiameter ongedaan." #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" -msgstr "" +msgstr "Kan het profiel niet exporteren als {0}: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:150 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." -msgstr "" +msgstr "Kan het profiel niet exporteren als {0}: Invoegtoepassing voor de schrijver heeft een fout gerapporteerd." #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:155 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" -msgstr "" +msgstr "Het profiel is geëxporteerd als {0}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 msgctxt "@info:title" msgid "Export Details" -msgstr "" +msgstr "Exportgegevens" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:182 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:204 @@ -1050,7 +1050,7 @@ msgstr "" #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to import profile from {0}: {1}" -msgstr "" +msgstr "Kan het profiel niet importeren uit {0}: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:215 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:251 @@ -1089,7 +1089,7 @@ msgstr "De hoogte van het bouwvolume is verminderd wegens de waarde van de inste #: /home/ruben/Projects/Cura/cura/BuildVolume.py:102 msgctxt "@info:title" msgid "Build Volume" -msgstr "" +msgstr "Werkvolume" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:34 msgctxt "@info:status" @@ -1100,7 +1100,7 @@ msgstr "Objecten verveelvoudigen en plaatsen" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 msgctxt "@info:title" msgid "Placing Object" -msgstr "" +msgstr "Object plaatsen" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:54 msgctxt "@title:window" @@ -1113,10 +1113,7 @@ msgid "" "

A fatal exception has occurred that we could not recover from!

\n" "

Please use the information below to post a bug report at http://github.com/Ultimaker/Cura/issues

\n" " " -msgstr "" -"

Er is een fatale fout opgetreden die niet kan worden hersteld!

\n" -"

Gebruik de onderstaande informatie om een bugrapport te plaatsen op http://github.com/Ultimaker/Cura/issues

\n" -" " +msgstr "

Er is een fatale fout opgetreden die niet kan worden hersteld!

\n

Gebruik de onderstaande informatie om een bugrapport te plaatsen op http://github.com/Ultimaker/Cura/issues

\n " #: /home/ruben/Projects/Cura/cura/CrashHandler.py:112 msgctxt "@action:button" @@ -1418,10 +1415,7 @@ msgid "" "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n" "\n" "Select your printer from the list below:" -msgstr "" -"Als u rechtstreeks via het netwerk wilt printen naar de printer, moet u ervoor zorgen dat de printer met een netwerkkabel is verbonden met het netwerk of moet u verbinding maken met de printer via het wifi-netwerk. Als u geen verbinding maakt tussen Cura en de printer, kunt u een USB-station gebruiken om g-code-bestanden naar de printer over te zetten.\n" -"\n" -"Selecteer uw printer in de onderstaande lijst:" +msgstr "Als u rechtstreeks via het netwerk wilt printen naar de printer, moet u ervoor zorgen dat de printer met een netwerkkabel is verbonden met het netwerk of moet u verbinding maken met de printer via het wifi-netwerk. Als u geen verbinding maakt tussen Cura en de printer, kunt u een USB-station gebruiken om g-code-bestanden naar de printer over te zetten.\n\nSelecteer uw printer in de onderstaande lijst:" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:75 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:75 @@ -1547,17 +1541,17 @@ msgstr "Configuratie Activeren" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:284 msgctxt "@label" msgid "This printer is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "Deze printer is niet ingesteld voor het hosten van een groep aaneengesloten Ultimaker 3-printers" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:287 msgctxt "@label" msgid "This printer is the host for a group of %1 connected Ultimaker 3 printers" -msgstr "" +msgstr "Deze printer is de host voor een groep van %1 aaneengesloten Ultimaker 3-printers" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:24 msgctxt "@title:window" msgid "Print over network" -msgstr "" +msgstr "Printen via netwerk" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:92 msgctxt "@action:button" @@ -1567,98 +1561,98 @@ msgstr "Printen" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:50 msgctxt "@label: arg 1 is group name" msgid "%1 is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "%1 is niet ingesteld voor het hosten van een groep aangesloten Ultimaker 3-printers" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:311 msgctxt "@label:status" msgid "Printing" -msgstr "" +msgstr "Printen" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:315 msgctxt "@label:status" msgid "Reserved" -msgstr "" +msgstr "Gereserveerd" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:317 msgctxt "@label:status" msgid "Finished" -msgstr "" +msgstr "Gereed" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:320 msgctxt "@label:status" msgid "Preparing" -msgstr "" +msgstr "Voorbereiden" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:327 msgctxt "@label:status" msgid "Available" -msgstr "" +msgstr "Beschikbaar" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:367 msgctxt "@label" msgid "Completed on: " -msgstr "" +msgstr "Voltooid op: " #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:371 msgctxt "@label" msgid "Clear build plate" -msgstr "" +msgstr "Platform leegmaken" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:375 msgctxt "@label" msgid "Preparing to print" -msgstr "" +msgstr "Voorbereiden om te printen" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:379 msgctxt "@label" msgid "Not accepting print jobs" -msgstr "" +msgstr "Accepteert geen printtaken" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:14 msgctxt "@info:tooltip" msgid "Opens the print jobs page with your default web browser." -msgstr "" +msgstr "Opent de pagina met printtaken in uw standaard webbrowser." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:15 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:154 msgctxt "@action:button" msgid "View print jobs" -msgstr "" +msgstr "Printtaken weergeven" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:36 msgctxt "@label" msgid "PRINTER GROUP" -msgstr "" +msgstr "PRINTERGROEP" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:69 msgctxt "@title" msgid "Print jobs" -msgstr "" +msgstr "Printtaken" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:100 msgctxt "@label" msgid "Printing" -msgstr "" +msgstr "Printen" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:118 msgctxt "@label" msgid "Queued" -msgstr "" +msgstr "In wachtrij" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:135 msgctxt "@label" msgid "Waiting for configuration change" -msgstr "" +msgstr "Wacht op wijziging van configuratie" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:194 msgctxt "@label:title" msgid "Printers" -msgstr "" +msgstr "Printers" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:247 msgctxt "@action:button" msgid "View printers" -msgstr "" +msgstr "Printers weergeven" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/ConfigDialog.qml:20 msgctxt "@title:window" @@ -2049,7 +2043,7 @@ msgstr "Geïnstalleerd" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:199 msgctxt "@title:window" msgid "Plugin License Agreement" -msgstr "" +msgstr "Licentieovereenkomst invoegtoepassing" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:220 msgctxt "@label" @@ -2057,17 +2051,17 @@ msgid "" " plugin contains a license.\n" "You need to accept this license to install this plugin.\n" "Do you agree with the terms below?" -msgstr "" +msgstr " invoegtoepassing bevat een licentie.\nU moet akkoord gaan met deze licentie om deze invoegtoepassing te mogen installeren.\nGaat u akkoord met onderstaande voorwaarden?" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:242 msgctxt "@action:button" msgid "Accept" -msgstr "" +msgstr "Ja, ik ga akkoord" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:253 msgctxt "@action:button" msgid "Decline" -msgstr "" +msgstr "Nee, ik ga niet akkoord" #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml:25 #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:25 @@ -2322,9 +2316,7 @@ msgctxt "@text:window" msgid "" "You have customized some profile settings.\n" "Would you like to keep or discard those settings?" -msgstr "" -"U hebt enkele profielinstellingen aangepast.\n" -"Wilt u deze instellingen behouden of verwijderen?" +msgstr "U hebt enkele profielinstellingen aangepast.\nWilt u deze instellingen behouden of verwijderen?" #: /home/ruben/Projects/Cura/resources/qml/DiscardOrKeepProfileChangesDialog.qml:110 msgctxt "@title:column" @@ -2908,12 +2900,12 @@ msgstr "Materiaal Importeren" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:320 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" -msgstr "" +msgstr "Kon materiaal %1 niet importeren: %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:324 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" -msgstr "" +msgstr "Materiaal %1 is geïmporteerd" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:343 #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:358 @@ -2924,12 +2916,12 @@ msgstr "Materiaal Exporteren" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:362 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" -msgstr "" +msgstr "Exporteren van materiaal naar %1 is mislukt: %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:368 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" -msgstr "" +msgstr "Materiaal is geëxporteerd naar %1" #: /home/ruben/Projects/Cura/resources/qml/AddMachineDialog.qml:18 #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:766 @@ -2962,9 +2954,7 @@ msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" -msgstr "" -"Cura is ontwikkeld door Ultimaker B.V. in samenwerking met de community.\n" -"Cura is er trots op gebruik te maken van de volgende opensourceprojecten:" +msgstr "Cura is ontwikkeld door Ultimaker B.V. in samenwerking met de community.\nCura maakt met trots gebruik van de volgende opensourceprojecten:" #: /home/ruben/Projects/Cura/resources/qml/AboutDialog.qml:118 msgctxt "@label" @@ -3067,10 +3057,7 @@ msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." -msgstr "" -"Sommige waarden voor instellingen/overschrijvingen zijn anders dan de waarden die in het profiel zijn opgeslagen.\n" -"\n" -"Klik om het profielbeheer te openen." +msgstr "Sommige waarden of aanpassingen van instellingen zijn anders dan de waarden die in het profiel zijn opgeslagen.\n\nKlik om het profielbeheer te openen." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:145 msgctxt "@label:textbox" @@ -3108,10 +3095,7 @@ msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." -msgstr "" -"Een aantal verborgen instellingen gebruiken andere waarden dan hun normale berekende waarde.\n" -"\n" -"Klik om deze instellingen zichtbaar te maken." +msgstr "Een aantal verborgen instellingen gebruiken andere waarden dan hun normale berekende waarde.\n\nKlik om deze instellingen zichtbaar te maken." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:62 msgctxt "@label Header for list of settings." @@ -3139,10 +3123,7 @@ msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." -msgstr "" -"Deze instelling heeft een andere waarde dan in het profiel.\n" -"\n" -"Klik om de waarde van het profiel te herstellen." +msgstr "Deze instelling heeft een andere waarde dan in het profiel.\n\nKlik om de waarde van het profiel te herstellen." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:284 msgctxt "@label" @@ -3150,10 +3131,7 @@ msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." -msgstr "" -"Deze instelling wordt normaliter berekend, maar is nu ingesteld op een absolute waarde.\n" -"\n" -"Klik om de berekende waarde te herstellen." +msgstr "Deze instelling wordt normaliter berekend, maar is nu ingesteld op een absolute waarde.\n\nKlik om de berekende waarde te herstellen." #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:118 msgctxt "@label:listbox" @@ -3165,9 +3143,7 @@ msgctxt "@label:listbox" msgid "" "Print Setup disabled\n" "G-code files cannot be modified" -msgstr "" -"Instelling voor printen uitgeschakeld\n" -"G-code-bestanden kunnen niet worden aangepast" +msgstr "Instelling voor printen uitgeschakeld\nG-code-bestanden kunnen niet worden aangepast" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:326 msgctxt "@label" @@ -3177,22 +3153,22 @@ msgstr "00u 00min" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:344 msgctxt "@tooltip" msgid "Time information" -msgstr "" +msgstr "Tijdsinformatie" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:370 msgctxt "@description" msgid "Print time" -msgstr "" +msgstr "Printtijd" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:409 msgctxt "@label" msgid "%1m / ~ %2g / ~ %4 %3" -msgstr "" +msgstr "%1m / ~ %2g / ~ %4 %3" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:414 msgctxt "@label" msgid "%1m / ~ %2g" -msgstr "" +msgstr "%1m / ~ %2g" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:476 msgctxt "@tooltip" @@ -3252,12 +3228,12 @@ msgstr "Er is geen printer aangesloten" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:157 msgctxt "@label" msgid "Extruder" -msgstr "" +msgstr "Extruder" #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:120 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." -msgstr "" +msgstr "De doeltemperatuur van de hot-end. De hot-end wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van de hot-end uitgeschakeld." #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:152 msgctxt "@tooltip" @@ -3726,27 +3702,27 @@ msgstr "Voorbereiden" #: /home/ruben/Projects/Cura/resources/qml/Topbar.qml:79 msgctxt "@title:tab" msgid "Monitor" -msgstr "" +msgstr "Controleren" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:50 msgctxt "@label" msgid "Layer Height" -msgstr "" +msgstr "Laaghoogte" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:62 msgctxt "@label" msgid "Print Speed" -msgstr "" +msgstr "Printsnelheid" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:73 msgctxt "@label" msgid "Slower" -msgstr "" +msgstr "Langzamer" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:85 msgctxt "@label" msgid "Faster" -msgstr "" +msgstr "Sneller" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:416 msgctxt "@label" @@ -3761,7 +3737,7 @@ msgstr "Met geleidelijke vulling neemt de hoeveelheid vulling naar boven toe." #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:602 msgctxt "@label" msgid "Enable gradual" -msgstr "" +msgstr "Geleidelijke vulling" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:668 msgctxt "@label" @@ -3838,7 +3814,7 @@ msgstr "Materiaal" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:374 msgctxt "@label" msgid "Check material compatibility" -msgstr "" +msgstr "Materiaalcompatibiliteit controleren" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:394 msgctxt "@tooltip" @@ -3898,12 +3874,12 @@ msgstr "Godmodus" #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box." -msgstr "" +msgstr "Accepteert G-code en verzendt deze code via wifi naar een Doodle3D WiFi-Box." #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "name" msgid "Doodle3D WiFi-Box" -msgstr "" +msgstr "Doodle3D WiFi-Box" #: ChangeLogPlugin/plugin.json msgctxt "description" @@ -3958,17 +3934,17 @@ msgstr "UM3-netwerkverbinding" #: CuraPrintClusterUpload/plugin.json msgctxt "name" msgid "UM3 Network Connection (Cluster)" -msgstr "" +msgstr "UM3-netwerkverbinding (Cluster)" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." -msgstr "" +msgstr "Controleert op firmware-updates." #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" -msgstr "" +msgstr "Firmware-updatecontrole" #: CuraSolidWorksPlugin/plugin.json msgctxt "description" @@ -4063,12 +4039,12 @@ msgstr "Versie-upgrade van 2.5 naar 2.6." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." -msgstr "" +msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.7 naar Cura 3.0." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" -msgstr "" +msgstr "Versie-upgrade van 2.7 naar 3.0" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" @@ -4992,4 +4968,4 @@ msgstr "Cura-profiellezer" #~ msgctxt "@label:" #~ msgid "Print Again" -#~ msgstr "Opnieuw Printen" +#~ msgstr "Opnieuw Printen" \ No newline at end of file diff --git a/resources/i18n/nl_NL/fdmprinter.def.json.po b/resources/i18n/nl_NL/fdmprinter.def.json.po index 8814e03e1c..18b692c116 100644 --- a/resources/i18n/nl_NL/fdmprinter.def.json.po +++ b/resources/i18n/nl_NL/fdmprinter.def.json.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:31+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: Dutch\n" "Language: nl_NL\n" @@ -1118,7 +1118,7 @@ msgstr "Willekeurig" #: fdmprinter.def.json msgctxt "z_seam_type option sharpest_corner" msgid "Sharpest Corner" -msgstr "" +msgstr "Scherpste hoek" #: fdmprinter.def.json msgctxt "z_seam_x label" @@ -1143,32 +1143,32 @@ msgstr "De Y-coördinaat van de positie nabij waar met het printen van elk deel #: fdmprinter.def.json msgctxt "z_seam_corner label" msgid "Seam Corner Preference" -msgstr "" +msgstr "Voorkeur van naad en hoek" #: fdmprinter.def.json msgctxt "z_seam_corner description" msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner." -msgstr "" +msgstr "Instellen of hoeken in het model invloed hebben op de positie van de naad. Geen wil zeggen dat hoeken geen invloed hebben op de positie van de naad. Met Naad verbergen is de kans groter dat de naad op een binnenhoek komt. Met Naad zichtbaar maken is de kans groter dat de naad op een buitenhoek komt. Met Naad verbergen of Naad zichtbaar maken is de kans groter dat de naad op een binnen- of buitenhoek komt." #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_none" msgid "None" -msgstr "" +msgstr "Geen" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_inner" msgid "Hide Seam" -msgstr "" +msgstr "Naad verbergen" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" -msgstr "" +msgstr "Naad zichtbaar maken" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_any" msgid "Hide or Expose Seam" -msgstr "" +msgstr "Naad verbergen of zichtbaar maken" #: fdmprinter.def.json msgctxt "z_seam_relative label" @@ -1248,7 +1248,7 @@ msgstr "Vulpatroon" #: fdmprinter.def.json msgctxt "infill_pattern description" msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, cubic, octet, quarter cubic and concentric patterns are fully printed every layer. Cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction." -msgstr "" +msgstr "Het patroon van het vulmateriaal van de print. De lijn- en zigzagvulling veranderen per vullaag van richting, waardoor wordt bespaard op materiaalkosten. De raster-, driehoeks-, kubische, achtvlaks-, afgeknotte kubus- en concentrische patronen worden elke laag volledig geprint. Kubische, afgeknotte kubus- en achtvlaksvullingen veranderen elke laag voor een meer gelijke krachtsverdeling in elke richting." #: fdmprinter.def.json msgctxt "infill_pattern option grid" @@ -1278,12 +1278,12 @@ msgstr "Kubische onderverdeling" #: fdmprinter.def.json msgctxt "infill_pattern option tetrahedral" msgid "Octet" -msgstr "" +msgstr "Octet" #: fdmprinter.def.json msgctxt "infill_pattern option quarter_cubic" msgid "Quarter Cubic" -msgstr "" +msgstr "Afgeknotte kubus" #: fdmprinter.def.json msgctxt "infill_pattern option concentric" @@ -1303,22 +1303,22 @@ msgstr "Zigzag" #: fdmprinter.def.json msgctxt "infill_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Kruis" #: fdmprinter.def.json msgctxt "infill_pattern option cross_3d" msgid "Cross 3D" -msgstr "" +msgstr "Kruis 3D" #: fdmprinter.def.json msgctxt "zig_zaggify_infill label" msgid "Connect Infill Lines" -msgstr "" +msgstr "Vullijnen verbinden" #: fdmprinter.def.json msgctxt "zig_zaggify_infill description" msgid "Connect the ends where the infill pattern meets the inner wall using a lines which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduces the effects on infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used." -msgstr "" +msgstr "Verbindt de uiteinden waar het vulpatroon bij de binnenwand komt met een lijn die de vorm van de binnenwand volgt. Als u deze instelling inschakelt, kan de vulling beter hechten aan de wanden en wordt de invloed van de vulling op de kwaliteit van de verticale oppervlakken kleiner. Als u deze instelling uitschakelt, wordt er minder materiaal gebruikt." #: fdmprinter.def.json msgctxt "infill_angles label" @@ -1443,32 +1443,32 @@ msgstr "Genereer geen gebieden met vulling die kleiner zijn dan deze waarde (geb #: fdmprinter.def.json msgctxt "skin_preshrink label" msgid "Skin Removal Width" -msgstr "" +msgstr "Verwijderingsbreedte skin" #: fdmprinter.def.json msgctxt "skin_preshrink description" msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "De grootste breedte van skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de bovenste/onderste skinlaag op schuine vlakken in het model." #: fdmprinter.def.json msgctxt "top_skin_preshrink label" msgid "Top Skin Removal Width" -msgstr "" +msgstr "Verwijderingsbreedte bovenste skinlaag" #: fdmprinter.def.json msgctxt "top_skin_preshrink description" msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model." -msgstr "" +msgstr "De grootste breedte van delen van bovenste skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde, zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de bovenste/onderste skinlaag op schuine vlakken in het model." #: fdmprinter.def.json msgctxt "bottom_skin_preshrink label" msgid "Bottom Skin Removal Width" -msgstr "" +msgstr "Verwijderingsbreedte onderste skinlaag" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink description" msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "De grootste breedte van delen van de onderste skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde, zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de onderste skinlaag op schuine vlakken in het model." #: fdmprinter.def.json msgctxt "expand_skins_expand_distance label" @@ -1478,27 +1478,27 @@ msgstr "Uitbreidingsafstand van skin" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance description" msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "De afstand waarmee de skin wordt uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en hechten de wanden van aangrenzende lagen beter aan de skin. Bij lagere waarden wordt er minder materiaal gebruikt." #: fdmprinter.def.json msgctxt "top_skin_expand_distance label" msgid "Top Skin Expand Distance" -msgstr "" +msgstr "Uitbreidingsafstand van bovenste skinlaag" #: fdmprinter.def.json msgctxt "top_skin_expand_distance description" msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "De afstand waarmee de bovenste skinlagen worden uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en hechten de wanden op de bovenliggende laag beter aan de skin. Bij lagere waarden wordt er minder materiaal gebruikt." #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance label" msgid "Bottom Skin Expand Distance" -msgstr "" +msgstr "Uitbreidingsafstand van onderste skinlaag" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance description" msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used." -msgstr "" +msgstr "De afstand waarmee de onderste skinlagen worden uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en de wanden van de onderliggende laag. Bij lagere waarden wordt er minder materiaal gebruikt." #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion label" @@ -2818,7 +2818,7 @@ msgstr "Zigzag" #: fdmprinter.def.json msgctxt "support_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Kruis" #: fdmprinter.def.json msgctxt "support_connect_zigzags label" @@ -2833,32 +2833,32 @@ msgstr "Verbind de zigzaglijnen. Hiermee versterkt u de zigzag-supportstructuur. #: fdmprinter.def.json msgctxt "support_skip_some_zags label" msgid "Break Up Support In Chunks" -msgstr "" +msgstr "Supportstructuur in Stukken Breken" #: fdmprinter.def.json msgctxt "support_skip_some_zags description" msgid "Skip some support line connections to make the support structure easier to break away. This setting is applicable to the Zig Zag support infill pattern." -msgstr "" +msgstr "Sla enkele verbindingen tussen lijnen van de supportstructuur over zodat deze gemakkelijker kan worden weggebroken. Deze instelling is van toepassing op het zigzag-vulpatroon van de supportstructuur." #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm label" msgid "Support Chunk Size" -msgstr "" +msgstr "Grootte Supportstuk" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm description" msgid "Leave out a connection between support lines once every N millimeter to make the support structure easier to break away." -msgstr "" +msgstr "Sla elke N millimeter een verbinding tussen de lijnen van de supportstructuur over, zodat deze gemakkelijker kan worden weggebroken." #: fdmprinter.def.json msgctxt "support_zag_skip_count label" msgid "Support Chunk Line Count" -msgstr "" +msgstr "Aantal Lijnen Supportstuk" #: fdmprinter.def.json msgctxt "support_zag_skip_count description" msgid "Skip one in every N connection lines to make the support structure easier to break away." -msgstr "" +msgstr "Sla elke N verbindingslijnen één lijn over zodat de supportstructuur gemakkelijker kan worden weggebroken." #: fdmprinter.def.json msgctxt "support_infill_rate label" @@ -3400,9 +3400,7 @@ msgctxt "skirt_gap description" msgid "" "The horizontal distance between the skirt and the first layer of the print.\n" "This is the minimum distance, multiple skirt lines will extend outwards from this distance." -msgstr "" -"De horizontale afstand tussen de skirt en de eerste laag van de print.\n" -"Dit is de minimumafstand; als u meerdere skirtlijnen print, worden deze vanaf deze afstand naar buiten geprint." +msgstr "De horizontale afstand tussen de skirt en de eerste laag van de print.\nDit is de minimumafstand; als u meerdere skirtlijnen print, worden deze vanaf deze afstand naar buiten geprint." #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length label" @@ -3447,22 +3445,22 @@ msgstr "Print de brim alleen aan de buitenkant van het model. Hiermee verkleint #: fdmprinter.def.json msgctxt "z_offset_layer_0 label" msgid "Initial Layer Z Offset" -msgstr "" +msgstr "Z-offset Eerste Laag" #: fdmprinter.def.json msgctxt "z_offset_layer_0 description" msgid "The extruder is offset from the normal height of the first layer by this amount. It can be positive (raised) or negative (lowered). Some filament types adhere to the build plate better if the extruder is raised slightly." -msgstr "" +msgstr "De extruder wordt in deze mate gecorrigeerd ten opzichte van de normale hoogte van de eerste laag. Dit kan plus (verhoogd) of min (verlaagd) zijn. Sommige soorten filament hechten beter op het platform als de extruder iets hoger staat." #: fdmprinter.def.json msgctxt "z_offset_taper_layers label" msgid "Z Offset Taper Layers" -msgstr "" +msgstr "Z-offset Aflopende Lagen" #: fdmprinter.def.json msgctxt "z_offset_taper_layers description" msgid "When non-zero, the Z offset is reduced to 0 over that many layers. A value of 0 means that the Z offset remains constant for all the layers in the print." -msgstr "" +msgstr "Wanneer de waarde niet is ingesteld op 0, dan wordt de Z-offset over zoveel lagen verkleind tot 0. Wanneer de waarde op 0 is ingesteld, blijft de Z-offset voor alle lagen in de print gelijk." #: fdmprinter.def.json msgctxt "raft_margin label" @@ -3477,12 +3475,12 @@ msgstr "Als de raft is ingeschakeld, is dit het extra raftgebied rond het model #: fdmprinter.def.json msgctxt "raft_smoothing label" msgid "Raft Smoothing" -msgstr "" +msgstr "Raft effenen" #: fdmprinter.def.json msgctxt "raft_smoothing description" msgid "This setting control how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle." -msgstr "" +msgstr "Deze instelling bepaalt hoeveel binnenhoeken in de raftcontour worden afgerond. Naar binnen gebogen hoeken worden tot een halve cirkel afgerond met een straal die gelijk is aan de hier opgegeven waarde. Met deze instellingen worden ook gaten in de raftcontour verwijderd die kleiner zijn dan een dergelijke cirkel." #: fdmprinter.def.json msgctxt "raft_airgap label" @@ -4162,12 +4160,12 @@ msgstr "Maak de gespiraliseerde contouren vlak om de zichtbaarheid van de Z-naad #: fdmprinter.def.json msgctxt "relative_extrusion label" msgid "Relative Extrusion" -msgstr "" +msgstr "Relatieve Extrusie" #: fdmprinter.def.json msgctxt "relative_extrusion description" msgid "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the Gcode. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any Gcode script is output." -msgstr "" +msgstr "Gebruik relatieve extrusie in plaats van absolute extrusie. Bij het gebruik van relatieve E-steps wordt het nabewerken van G-code gemakkelijker. Deze optie wordt echter niet door alle printers ondersteund en kan lichte afwijkingen vertonen in de hoeveelheid afgezet materiaal ten opzichte van absolute E-steps. Ongeacht deze instelling wordt de extrusiemodus altijd ingesteld op absoluut voordat er een G-code-script wordt uitgevoerd.." #: fdmprinter.def.json msgctxt "experimental label" @@ -4182,12 +4180,12 @@ msgstr "experimenteel!" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" -msgstr "" +msgstr "Printvolgorde van wanden optimaliseren" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order description" msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization." -msgstr "" +msgstr "Optimaliseer de volgorde waarin wanden worden geprint om het aantal intrekbewegingen en de afgelegde afstand te verkleinen. Deze instelling is gunstig voor de meeste onderdelen. Bij sommige onderdelen duurt het printen echter langer. Controleer daarom de verwachte printtijd met en zonder optimalisatie." #: fdmprinter.def.json msgctxt "draft_shield_enabled label" @@ -4312,22 +4310,22 @@ msgstr "Wissel de richting af waarin de boven-/onderlagen worden geprint. Normaa #: fdmprinter.def.json msgctxt "cross_infill_pocket_size label" msgid "Cross 3D Pocket Size" -msgstr "" +msgstr "Luchtbelgrootte bij Kruis 3D" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size description" msgid "The size of pockets at four-way crossings in the cross 3D pattern at heights where the pattern is touching itself." -msgstr "" +msgstr "De grootte van luchtbellen op kruispunten in het kruis 3D-patroon op punten waar het patroon zichzelf raakt." #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly label" msgid "Alternate Cross 3D Pockets" -msgstr "" +msgstr "Afwisselend luchtbellen in kruis 3D" #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly description" msgid "Only apply pockets at half of the four-way crossings in the cross 3D pattern and alternate the location of the pockets between heights where the pattern is touching itself." -msgstr "" +msgstr "Laat alleen luchtbellen achter in de helft van de kruispunten in het Kruis 3D-patroon en wisselt de plaats van de luchtbellen op punten waar het patroon zichzelf raakt." #: fdmprinter.def.json msgctxt "spaghetti_infill_enabled label" @@ -4629,9 +4627,7 @@ msgctxt "wireframe_up_half_speed description" msgid "" "Distance of an upward move which is extruded with half speed.\n" "This can cause better adhesion to previous layers, while not heating the material in those layers too much. Only applies to Wire Printing." -msgstr "" -"De afstand van een opwaartse beweging waarbij de doorvoersnelheid wordt gehalveerd.\n" -"Hierdoor ontstaat een betere hechting aan voorgaande lagen, zonder dat het materiaal in die lagen te zeer wordt verwarmd. Alleen van toepassing op Draadprinten." +msgstr "De afstand van een opwaartse beweging waarbij de doorvoersnelheid wordt gehalveerd.\nHierdoor ontstaat een betere hechting aan voorgaande lagen, zonder dat het materiaal in die lagen te zeer wordt verwarmd. Alleen van toepassing op Draadprinten." #: fdmprinter.def.json msgctxt "wireframe_top_jump label" @@ -4751,12 +4747,12 @@ msgstr "Ga nog een extra keer over de bovenlaag, echter zonder materiaal door te #: fdmprinter.def.json msgctxt "ironing_only_highest_layer label" msgid "Iron Only Highest Layer" -msgstr "" +msgstr "Alleen hoogste laag strijken" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer description" msgid "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish." -msgstr "" +msgstr "Strijk alleen de allerlaatste laag van het voorwerp. Dit bespaart tijd als de daaronder gelegen lagen geen glad oppervlak vereisen." #: fdmprinter.def.json msgctxt "ironing_pattern label" @@ -5120,4 +5116,4 @@ msgstr "Omzettingsmatrix die moet worden toegepast op het model wanneer dit word #~ msgctxt "multiple_mesh_overlap label" #~ msgid "Dual Extrusion Overlap" -#~ msgstr "Overlap Dubbele Doorvoer" +#~ msgstr "Overlap Dubbele Doorvoer" \ No newline at end of file diff --git a/resources/i18n/tr_TR/cura.po b/resources/i18n/tr_TR/cura.po index 6de9035df8..6d3b884525 100644 --- a/resources/i18n/tr_TR/cura.po +++ b/resources/i18n/tr_TR/cura.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:30+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: Turkish\n" "Language: tr_TR\n" @@ -24,7 +24,7 @@ msgstr "Makine Ayarları" #: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" -msgstr "" +msgstr "Röntgen Görüntüsü" #: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" @@ -39,17 +39,17 @@ msgstr "GCode Dosyası" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:65 msgctxt "@action:button" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Doodle3D WiFi-Box ile yazdır" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:66 msgctxt "@properties:tooltip" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "Doodle3D WiFi-Box ile yazdır" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:86 msgctxt "@info:status" msgid "Connecting to Doodle3D Connect" -msgstr "" +msgstr "Doodle3D Connect’e bağlanıyor" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:87 #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:155 @@ -73,32 +73,32 @@ msgstr "İptal et" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:154 msgctxt "@info:status" msgid "Sending data to Doodle3D Connect" -msgstr "" +msgstr "Doodle3D Connect’e veri gönderiliyor" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:161 msgctxt "@info:status" msgid "Unable to send data to Doodle3D Connect. Is another job still active?" -msgstr "" +msgstr "Doodle3D Connect’e veri gönderilemiyor. Hala etkin olan başka bir iş var mı?" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:175 msgctxt "@info:status" msgid "Storing data on Doodle3D Connect" -msgstr "" +msgstr "Doodle3D Connect üzerinde veri depolanıyor" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:213 msgctxt "@info:status" msgid "File sent to Doodle3D Connect" -msgstr "" +msgstr "Doodle3D Connect’e dosya gönderildi" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@action:button" msgid "Open Connect.." -msgstr "" +msgstr "Connect’i aç.." #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@info:tooltip" msgid "Open the Doodle3D Connect web interface" -msgstr "" +msgstr "Doodle3D Connect web arayüzünü aç" #: /home/ruben/Projects/Cura/plugins/ChangeLogPlugin/ChangeLog.py:35 msgctxt "@item:inmenu" @@ -143,7 +143,7 @@ msgstr "Yazıcı meşgul veya bağlı olmadığı için yeni bir işlem başlat #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:153 msgctxt "@info:title" msgid "Print Details" -msgstr "" +msgstr "Yazdırma Ayrıntıları" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:status" @@ -153,7 +153,7 @@ msgstr "Yazıcı, UltiGCode türü kullandığı için USB yazdırmayı destekle #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:title" msgid "USB Printing" -msgstr "" +msgstr "USB Yazdırma" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:460 msgctxt "@info:status" @@ -168,7 +168,7 @@ msgstr "Yazıcı USB ile yazdırmayı desteklemediği için yeni bir işlem baş #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1296 msgctxt "@info:title" msgid "Warning" -msgstr "" +msgstr "Uyarı" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:108 msgctxt "@info" @@ -184,7 +184,7 @@ msgstr "%s’te yazıcı için gerekli aygıt yazılım bulunamadı." #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:122 msgctxt "@info:title" msgid "Printer Firmware" -msgstr "" +msgstr "Yazıcı Bellenimi" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." @@ -201,25 +201,25 @@ msgstr "Çıkarılabilir Sürücüye Kaydediliyor {0}" #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" -msgstr "" +msgstr "Çıkarılabilir Sürücü {0} Üzerine Kaydediliyor " #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:89 msgctxt "@info:title" msgid "Saving" -msgstr "" +msgstr "Kaydediliyor" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:99 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:102 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" -msgstr "" +msgstr "{0} dosyasına kaydedilemedi: {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:118 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." -msgstr "" +msgstr "{device} üzerine yazmaya çalışırken dosya adı bulunamadı." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:131 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146 @@ -236,7 +236,7 @@ msgstr "Çıkarılabilir aygıta {0} kaydedilemedi: {1}" #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1305 msgctxt "@info:title" msgid "Error" -msgstr "" +msgstr "Hata" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 #, python-brace-format @@ -247,7 +247,7 @@ msgstr "Çıkarılabilir Sürücüye {0}, {1} olarak kaydedildi" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 msgctxt "@info:title" msgid "File Saved" -msgstr "" +msgstr "Dosya Kaydedildi" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 msgctxt "@action:button" @@ -269,7 +269,7 @@ msgstr "Çıkarıldı {0}. Şimdi sürücüyü güvenle kaldırabilirsiniz." #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:156 msgctxt "@info:title" msgid "Safely Remove Hardware" -msgstr "" +msgstr "Donanımı Güvenli Bir Şekilde Kaldırın" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:158 #, python-brace-format @@ -304,7 +304,7 @@ msgstr "İstenen yazıcıya erişim. Lütfen yazıcı isteğini onaylayın" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:157 msgctxt "@info:title" msgid "Connection status" -msgstr "" +msgstr "Bağlantı durumu" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:158 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:158 @@ -319,7 +319,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:500 msgctxt "@info:title" msgid "Connection Status" -msgstr "" +msgstr "Bağlantı Durumu" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:159 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:159 @@ -417,7 +417,7 @@ msgstr "Yazıcı meşgul, yeni bir yazdırma başlatılamıyor. Geçerli yazıc #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:650 msgctxt "@info:title" msgid "Printer Status" -msgstr "" +msgstr "Yazıcı Durumu" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:674 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:660 @@ -488,7 +488,7 @@ msgstr "Veriler yazıcıya gönderiliyor" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:839 msgctxt "@info:title" msgid "Sending Data" -msgstr "" +msgstr "Veri gönderiliyor" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:908 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:890 @@ -547,73 +547,73 @@ msgstr "Ağ ile Bağlan" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:103 msgid "This printer is not set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Bu yazıcı, bağlı Ultimaker 3 yazıcı grubunu barındırmak için ayarlı değildir." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:104 #, python-brace-format msgctxt "Count is number of printers." msgid "This printer is the host for a group of {count} connected Ultimaker 3 printers." -msgstr "" +msgstr "Bu yazıcı, bağlı {count} Ultimaker 3 yazıcı grubunun ana makinesidir." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:105 #, python-brace-format msgid "{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate." -msgstr "" +msgstr "{printer_name}, '{job_name}' yazdırmayı tamamladı. Lütfen çıktıyı alın ve yapı levhasının temizlenmesini onaylayın." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:106 #, python-brace-format msgid "{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing." -msgstr "" +msgstr "{printer_name}, '{job_name}' yazdırmak için ayrılmıştır. Yazıcının yazdırmayı başlatması için lütfen yazıcı yapılandırmasını işe uygun olacak şekilde değiştirin." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:196 msgctxt "@info:status" msgid "Sending new jobs (temporarily) blocked, still sending the previous print job." -msgstr "" +msgstr "Yeni işlerin gönderilmesi (geçici olarak) engellenmiştir, hala bir önceki yazdırma işi gönderiliyor." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:212 msgctxt "@info:status" msgid "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "Yeni yazdırma işi gönderilemiyor: bu 3D yazıcı, bağlı Ultimaker 3 yazıcı grubunu barındırmak için (henüz) ayarlı değildir." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:425 #, python-brace-format msgctxt "@info:progress" msgid "Sending {file_name} to group {cluster_name}" -msgstr "" +msgstr "{file_name}, {cluster_name} grubuna gönderiliyor" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:498 #, python-brace-format msgctxt "@info:status" msgid "Sent {file_name} to group {cluster_name}." -msgstr "" +msgstr "{file_name}, {cluster_name} grubuna gönderildi." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:503 msgctxt "@action:button" msgid "Show print jobs" -msgstr "" +msgstr "Yazdırma işlerini göster" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:504 msgctxt "@info:tooltip" msgid "Opens the print jobs interface in your browser." -msgstr "" +msgstr "Yazdırma işleri arayüzünü tarayıcınızda açar." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:520 #, python-brace-format msgctxt "@info:status" msgid "Unable to send print job to group {cluster_name}." -msgstr "" +msgstr "Yazdırma işi, {cluster_name} grubuna gönderilemiyor." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:71 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "To ensure that your {machine_name} is equipped with the latest features it is recommended to update the firmware regularly. This can be done on the {machine_name} (when connected to the network) or via USB." -msgstr "" +msgstr "Makinenizin {machine_name} en son özellikler ile donanımlı olmasını sağlamak için bellenimi düzenli olarak güncellenmeniz önerilir. Bu, (ağa bağlı olduğunuzda) {machine_name} üzerinde veya USB ile gerçekleştirilebilir." #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:72 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s firmware available" -msgstr "" +msgstr "Yeni %s bellenimi mevcut" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:73 #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:149 @@ -624,7 +624,7 @@ msgstr "İndir" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:83 msgctxt "@info" msgid "Could not access update information." -msgstr "" +msgstr "Güncelleme bilgilerine erişilemedi." #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:199 msgctxt "@info:status" @@ -663,7 +663,7 @@ msgstr "Cura anonim dilimleme istatistiklerini toplar. Bu özelliği tercihlerde #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:46 msgctxt "@info:title" msgid "Collecting Data" -msgstr "" +msgstr "Veri Toplanıyor" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:48 msgctxt "@action:button" @@ -684,7 +684,7 @@ msgstr "G-code dosyası" #: /home/ruben/Projects/Cura/plugins/LayerView/__init__.py:13 msgctxt "@item:inlistbox" msgid "Layer view" -msgstr "" +msgstr "Katman görünümü" #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:93 msgctxt "@info:status" @@ -694,7 +694,7 @@ msgstr "Tel Yazma etkinleştirildiğinde, Cura katmanları doğru olarak görün #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:94 msgctxt "@info:title" msgid "Layer View" -msgstr "" +msgstr "Katman Görünümü" #: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" @@ -724,7 +724,7 @@ msgstr "GIF Resmi" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." -msgstr "" +msgstr "Mevcut malzeme, seçilen makine veya yapılandırma ile uyumlu olmadığından mevcut malzeme ile dilimlenemedi." #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:297 @@ -732,7 +732,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:316 msgctxt "@info:title" msgid "Unable to slice" -msgstr "" +msgstr "Dilimlenemedi" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:296 #, python-brace-format @@ -759,7 +759,7 @@ msgstr "Katmanlar İşleniyor" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:238 msgctxt "@info:title" msgid "Information" -msgstr "" +msgstr "Bilgi" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" @@ -798,18 +798,18 @@ msgstr "Nozül" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:28 msgctxt "@menuitem" msgid "Browse plugins" -msgstr "" +msgstr "Eklentilere göz at" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:163 #, python-brace-format msgctxt "@info:status" msgid "Failed to get plugin ID from {0}" -msgstr "" +msgstr "Eklenti kimliği, {0} dosyasından alınamadı" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:164 msgctxt "@info:tile" msgid "Warning" -msgstr "" +msgstr "Uyarı" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:202 msgctxt "@window:title" @@ -819,7 +819,7 @@ msgstr "Eklenti tarayıcısı" #: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" -msgstr "" +msgstr "Gerçek görünüm" #: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" @@ -835,7 +835,7 @@ msgstr "G-code ayrıştırma" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:370 msgctxt "@info:title" msgid "G-code Details" -msgstr "" +msgstr "G-code Ayrıntıları" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:368 msgctxt "@info:generic" @@ -917,7 +917,7 @@ msgstr "Destek" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:95 msgctxt "@tooltip" msgid "Skirt" -msgstr "" +msgstr "Etek" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:96 msgctxt "@tooltip" @@ -958,7 +958,7 @@ msgstr "Nesneler için yeni konum bulunuyor" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:34 msgctxt "@info:title" msgid "Finding Location" -msgstr "" +msgstr "Konumu Buluyor" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:89 #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 @@ -969,7 +969,7 @@ msgstr "Yapılan hacim içinde tüm nesneler için konum bulunamadı" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:90 msgctxt "@info:title" msgid "Can't Find Location" -msgstr "" +msgstr "Konum Bulunamıyor" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:431 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:112 @@ -982,7 +982,7 @@ msgstr "Dosya Zaten Mevcut" #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" -msgstr "" +msgstr "Dosya {0} zaten mevcut. Üstüne yazmak istediğinizden emin misiniz?" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:815 msgctxt "@label" @@ -1003,7 +1003,7 @@ msgstr "Seçilen malzeme, seçilen makine veya yapılandırma ile uyumlu değil. #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:title" msgid "Incompatible Material" -msgstr "" +msgstr "Uyumsuz Malzeme" #: /home/ruben/Projects/Cura/cura/Settings/MaterialManager.py:24 msgctxt "@info:status Has a cancel button next to it." @@ -1024,24 +1024,24 @@ msgstr "Malzeme çapını değiştirme işlemini geri al." #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" -msgstr "" +msgstr "Profilin {0} dosyasına aktarımı başarısız oldu: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:150 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." -msgstr "" +msgstr "Profilin {0} dosyasına aktarımı başarısız oldu: Yazıcı eklentisinde rapor edilen hata." #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:155 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" -msgstr "" +msgstr "Profil {0} dosyasına aktarıldı" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 msgctxt "@info:title" msgid "Export Details" -msgstr "" +msgstr "Dışa Aktarım Ayrıntıları" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:182 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:204 @@ -1050,7 +1050,7 @@ msgstr "" #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to import profile from {0}: {1}" -msgstr "" +msgstr "{0} dosyasından profil içe aktarımı başarısız oldu: {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:215 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:251 @@ -1089,7 +1089,7 @@ msgstr "Portalın yazdırılan modeller ile çarpışmasını önlemek için yap #: /home/ruben/Projects/Cura/cura/BuildVolume.py:102 msgctxt "@info:title" msgid "Build Volume" -msgstr "" +msgstr "Yapı Disk Bölümü" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:34 msgctxt "@info:status" @@ -1100,7 +1100,7 @@ msgstr "Nesneler çoğaltılıyor ve yerleştiriliyor" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 msgctxt "@info:title" msgid "Placing Object" -msgstr "" +msgstr "Nesne Yerleştiriliyor" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:54 msgctxt "@title:window" @@ -1113,10 +1113,7 @@ msgid "" "

A fatal exception has occurred that we could not recover from!

\n" "

Please use the information below to post a bug report at http://github.com/Ultimaker/Cura/issues

\n" " " -msgstr "" -"

Kurtulunamayan ciddi bir olağanüstü durum oluştu!

\n" -"

Yazılım hatası raporunu http://github.com/Ultimaker/Cura/issues adresine gönderirken aşağıdaki bilgileri kullanınız

\n" -" " +msgstr "

Kurtulunamayan ciddi bir olağanüstü durum oluştu!

\n

Yazılım hatası raporunu http://github.com/Ultimaker/Cura/issues adresine gönderirken aşağıdaki bilgileri kullanınız

\n " #: /home/ruben/Projects/Cura/cura/CrashHandler.py:112 msgctxt "@action:button" @@ -1418,10 +1415,7 @@ msgid "" "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n" "\n" "Select your printer from the list below:" -msgstr "" -"Yazıcınıza ağ üzerinden doğrudan bağlamak için, lütfen yazıcınızın ağ kablosu kullanan bir ağa bağlı olduğundan emin olun veya yazıcınızı WiFi ağına bağlayın. Cura'ya yazıcınız ile bağlanamıyorsanız g-code dosyalarını yazıcınıza aktarmak için USB sürücüsü kullanabilirsiniz.\n" -"\n" -"Aşağıdaki listeden yazıcınızı seçin:" +msgstr "Yazıcınıza ağ üzerinden doğrudan bağlamak için, lütfen yazıcınızın ağ kablosu kullanan bir ağa bağlı olduğundan emin olun veya yazıcınızı WiFi ağına bağlayın. Cura'ya yazıcınız ile bağlanamıyorsanız g-code dosyalarını yazıcınıza aktarmak için USB sürücüsü kullanabilirsiniz.\n\nAşağıdaki listeden yazıcınızı seçin:" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:75 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:75 @@ -1547,17 +1541,17 @@ msgstr "Yapılandırmayı Etkinleştir" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:284 msgctxt "@label" msgid "This printer is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "Bu yazıcı, bağlı Ultimaker 3 yazıcı grubunu barındırmak için ayarlı değildir" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:287 msgctxt "@label" msgid "This printer is the host for a group of %1 connected Ultimaker 3 printers" -msgstr "" +msgstr "Bu yazıcı, %1 bağlı Ultimaker 3 yazıcı grubunun ana makinesidir" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:24 msgctxt "@title:window" msgid "Print over network" -msgstr "" +msgstr "Ağ üzerinden yazdır" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:92 msgctxt "@action:button" @@ -1567,98 +1561,98 @@ msgstr "Yazdır" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:50 msgctxt "@label: arg 1 is group name" msgid "%1 is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "%1, bağlı Ultimaker 3 yazıcı grubunu barındırmak için ayarlı değildir" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:311 msgctxt "@label:status" msgid "Printing" -msgstr "" +msgstr "Yazdırma" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:315 msgctxt "@label:status" msgid "Reserved" -msgstr "" +msgstr "Rezerve edildi" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:317 msgctxt "@label:status" msgid "Finished" -msgstr "" +msgstr "Tamamlandı" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:320 msgctxt "@label:status" msgid "Preparing" -msgstr "" +msgstr "Hazırlanıyor" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:327 msgctxt "@label:status" msgid "Available" -msgstr "" +msgstr "Mevcut" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:367 msgctxt "@label" msgid "Completed on: " -msgstr "" +msgstr "Tamamlandığı tarih: " #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:371 msgctxt "@label" msgid "Clear build plate" -msgstr "" +msgstr "Yapı levhasını temizle" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:375 msgctxt "@label" msgid "Preparing to print" -msgstr "" +msgstr "Yazdırmaya hazırlanıyor" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:379 msgctxt "@label" msgid "Not accepting print jobs" -msgstr "" +msgstr "Yazdırma işleri kabul edilmiyor" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:14 msgctxt "@info:tooltip" msgid "Opens the print jobs page with your default web browser." -msgstr "" +msgstr "Yazdırma işlerini varsayılan web tarayıcınızda açar." #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:15 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:154 msgctxt "@action:button" msgid "View print jobs" -msgstr "" +msgstr "Yazdırma işlerini görüntüle" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:36 msgctxt "@label" msgid "PRINTER GROUP" -msgstr "" +msgstr "YAZICI GRUBU" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:69 msgctxt "@title" msgid "Print jobs" -msgstr "" +msgstr "Yazdırma görevleri" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:100 msgctxt "@label" msgid "Printing" -msgstr "" +msgstr "Yazdırma" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:118 msgctxt "@label" msgid "Queued" -msgstr "" +msgstr "Kuyrukta" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:135 msgctxt "@label" msgid "Waiting for configuration change" -msgstr "" +msgstr "Yapılandırma değişikliğini bekliyor" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:194 msgctxt "@label:title" msgid "Printers" -msgstr "" +msgstr "Yazıcılar" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:247 msgctxt "@action:button" msgid "View printers" -msgstr "" +msgstr "Yazıcıları görüntüle" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/ConfigDialog.qml:20 msgctxt "@title:window" @@ -2049,7 +2043,7 @@ msgstr "Yüklü" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:199 msgctxt "@title:window" msgid "Plugin License Agreement" -msgstr "" +msgstr "Eklenti Lisans Anlaşması" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:220 msgctxt "@label" @@ -2057,17 +2051,17 @@ msgid "" " plugin contains a license.\n" "You need to accept this license to install this plugin.\n" "Do you agree with the terms below?" -msgstr "" +msgstr " eklenti lisans içerir.\nBu eklentiyi kurmak için bu lisans kabul etmeniz gerekir.\nAşağıdaki koşulları kabul ediyor musunuz?" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:242 msgctxt "@action:button" msgid "Accept" -msgstr "" +msgstr "Kabul et" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:253 msgctxt "@action:button" msgid "Decline" -msgstr "" +msgstr "Reddet" #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml:25 #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:25 @@ -2322,9 +2316,7 @@ msgctxt "@text:window" msgid "" "You have customized some profile settings.\n" "Would you like to keep or discard those settings?" -msgstr "" -"Bazı profil ayarlarını özelleştirdiniz.\n" -"Bu ayarları kaydetmek veya iptal etmek ister misiniz?" +msgstr "Bazı profil ayarlarını özelleştirdiniz.\nBu ayarları kaydetmek veya iptal etmek ister misiniz?" #: /home/ruben/Projects/Cura/resources/qml/DiscardOrKeepProfileChangesDialog.qml:110 msgctxt "@title:column" @@ -2908,12 +2900,12 @@ msgstr "Malzemeyi İçe Aktar" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:320 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" -msgstr "" +msgstr "Malzeme %1 dosyasına içe aktarılamadı: %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:324 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" -msgstr "" +msgstr "Malzeme %1 dosyasına başarıyla içe aktarıldı" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:343 #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:358 @@ -2924,12 +2916,12 @@ msgstr "Malzemeyi Dışa Aktar" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:362 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" -msgstr "" +msgstr "Malzemenin %1 dosyasına dışa aktarımı başarısız oldu: %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:368 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" -msgstr "" +msgstr "Malzeme %1 dosyasına başarıyla dışa aktarıldı" #: /home/ruben/Projects/Cura/resources/qml/AddMachineDialog.qml:18 #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:766 @@ -2962,9 +2954,7 @@ msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" -msgstr "" -"Cura, topluluk iş birliği ile Ultimaker B.V. tarafından geliştirilmiştir.\n" -"Cura aşağıdaki açık kaynak projelerini gururla kullanmaktadır:" +msgstr "Cura, topluluk iş birliği ile Ultimaker B.V. tarafından geliştirilmiştir.\nCura aşağıdaki açık kaynak projelerini gururla kullanmaktadır:" #: /home/ruben/Projects/Cura/resources/qml/AboutDialog.qml:118 msgctxt "@label" @@ -3067,10 +3057,7 @@ msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." -msgstr "" -"Bazı ayar/geçersiz kılma değerleri profilinizde saklanan değerlerden farklıdır.\n" -"\n" -"Profil yöneticisini açmak için tıklayın." +msgstr "Bazı ayar/geçersiz kılma değerleri profilinizde saklanan değerlerden farklıdır.\n\nProfil yöneticisini açmak için tıklayın." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:145 msgctxt "@label:textbox" @@ -3108,10 +3095,7 @@ msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." -msgstr "" -"Gizlenen bazı ayarlar normal hesaplanan değerden farklı değerler kullanır.\n" -"\n" -"Bu ayarları görmek için tıklayın." +msgstr "Gizlenen bazı ayarlar normal hesaplanan değerden farklı değerler kullanır.\n\nBu ayarları görmek için tıklayın." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:62 msgctxt "@label Header for list of settings." @@ -3139,10 +3123,7 @@ msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." -msgstr "" -"Bu ayarın değeri profilden farklıdır.\n" -"\n" -"Profil değerini yenilemek için tıklayın." +msgstr "Bu ayarın değeri profilden farklıdır.\n\nProfil değerini yenilemek için tıklayın." #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:284 msgctxt "@label" @@ -3150,10 +3131,7 @@ msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." -msgstr "" -"Bu ayar normal olarak yapılır ama şu anda mutlak değer ayarı var.\n" -"\n" -"Hesaplanan değeri yenilemek için tıklayın." +msgstr "Bu ayar normal olarak yapılır ama şu anda mutlak değer ayarı var.\n\nHesaplanan değeri yenilemek için tıklayın." #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:118 msgctxt "@label:listbox" @@ -3165,9 +3143,7 @@ msgctxt "@label:listbox" msgid "" "Print Setup disabled\n" "G-code files cannot be modified" -msgstr "" -"Yazdırma Ayarı devre dışı\n" -"G-code dosyaları üzerinde değişiklik yapılamaz" +msgstr "Yazdırma Ayarı devre dışı\nG-code dosyaları üzerinde değişiklik yapılamaz" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:326 msgctxt "@label" @@ -3177,22 +3153,22 @@ msgstr "00sa 00dk" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:344 msgctxt "@tooltip" msgid "Time information" -msgstr "" +msgstr "Süre bilgisi" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:370 msgctxt "@description" msgid "Print time" -msgstr "" +msgstr "Yazdırma süresi" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:409 msgctxt "@label" msgid "%1m / ~ %2g / ~ %4 %3" -msgstr "" +msgstr "%1m / ~ %2g / ~ %4 %3" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:414 msgctxt "@label" msgid "%1m / ~ %2g" -msgstr "" +msgstr "%1m / ~ %2g" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:476 msgctxt "@tooltip" @@ -3252,12 +3228,12 @@ msgstr "Yazıcı bağlı değil" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:157 msgctxt "@label" msgid "Extruder" -msgstr "" +msgstr "Ekstrüder" #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:120 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." -msgstr "" +msgstr "Sıcak ucun hedef sıcaklığı. Sıcak uç, bu sıcaklığa doğru ısıtılır veya soğutulur. Bu ayar 0 olarak belirlenirse sıcak uç ısıtma kapatılır." #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:152 msgctxt "@tooltip" @@ -3726,27 +3702,27 @@ msgstr "Hazırla" #: /home/ruben/Projects/Cura/resources/qml/Topbar.qml:79 msgctxt "@title:tab" msgid "Monitor" -msgstr "" +msgstr "İzle" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:50 msgctxt "@label" msgid "Layer Height" -msgstr "" +msgstr "Katman Yüksekliği" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:62 msgctxt "@label" msgid "Print Speed" -msgstr "" +msgstr "Yazdırma Hızı" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:73 msgctxt "@label" msgid "Slower" -msgstr "" +msgstr "Daha yavaş" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:85 msgctxt "@label" msgid "Faster" -msgstr "" +msgstr "Daha Hızlı" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:416 msgctxt "@label" @@ -3761,7 +3737,7 @@ msgstr "Kademeli dolgu, yukarıya doğru dolgu miktarını kademeli olarak yüks #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:602 msgctxt "@label" msgid "Enable gradual" -msgstr "" +msgstr "Kademeli özelliği etkinleştir" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:668 msgctxt "@label" @@ -3838,7 +3814,7 @@ msgstr "Malzeme" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:374 msgctxt "@label" msgid "Check material compatibility" -msgstr "" +msgstr "Malzeme uyumunu denetle" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:394 msgctxt "@tooltip" @@ -3898,12 +3874,12 @@ msgstr "Tanrı Modu" #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box." -msgstr "" +msgstr "G-Code’u kabul eder ve WiFi üzerinden Doodle3D WiFi-Box'a gönderir." #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "name" msgid "Doodle3D WiFi-Box" -msgstr "" +msgstr "Doodle3D WiFi-Box" #: ChangeLogPlugin/plugin.json msgctxt "description" @@ -3958,17 +3934,17 @@ msgstr "UM3 Ağ Bağlantısı" #: CuraPrintClusterUpload/plugin.json msgctxt "name" msgid "UM3 Network Connection (Cluster)" -msgstr "" +msgstr "UM3 Ağ Bağlantısı (Küme)" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." -msgstr "" +msgstr "Bellenim güncellemelerini denetler." #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" -msgstr "" +msgstr "Bellenim Güncelleme Denetleyicisi" #: CuraSolidWorksPlugin/plugin.json msgctxt "description" @@ -4063,12 +4039,12 @@ msgstr "2.5’ten 2.6’ya Sürüm Yükseltme" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." -msgstr "" +msgstr "Yapılandırmaları Cura 2.7’den Cura 3.0’a yükseltir." #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" -msgstr "" +msgstr "2.7’den 3.0’a Sürüm Yükseltme" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" @@ -4973,4 +4949,4 @@ msgstr "Cura Profil Okuyucu" #~ msgctxt "@label:" #~ msgid "Print Again" -#~ msgstr "Yeniden Yazdır" +#~ msgstr "Yeniden Yazdır" \ No newline at end of file diff --git a/resources/i18n/tr_TR/fdmprinter.def.json.po b/resources/i18n/tr_TR/fdmprinter.def.json.po index c5ae253cfd..b67557a126 100644 --- a/resources/i18n/tr_TR/fdmprinter.def.json.po +++ b/resources/i18n/tr_TR/fdmprinter.def.json.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-11 14:31+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: Turkish\n" "Language: tr_TR\n" @@ -56,9 +56,7 @@ msgctxt "machine_start_gcode description" msgid "" "Gcode commands to be executed at the very start - separated by \n" "." -msgstr "" -"​\n" -" ile ayrılan, başlangıçta yürütülecek G-code komutları." +msgstr "​\n ile ayrılan, başlangıçta yürütülecek G-code komutları." #: fdmprinter.def.json msgctxt "machine_end_gcode label" @@ -70,9 +68,7 @@ msgctxt "machine_end_gcode description" msgid "" "Gcode commands to be executed at the very end - separated by \n" "." -msgstr "" -"​\n" -" ile ayrılan, bitişte yürütülecek Gcode komutları." +msgstr "​\n ile ayrılan, bitişte yürütülecek Gcode komutları." #: fdmprinter.def.json msgctxt "material_guid label" @@ -1122,7 +1118,7 @@ msgstr "Gelişigüzel" #: fdmprinter.def.json msgctxt "z_seam_type option sharpest_corner" msgid "Sharpest Corner" -msgstr "" +msgstr "En Keskin Köşe" #: fdmprinter.def.json msgctxt "z_seam_x label" @@ -1147,32 +1143,32 @@ msgstr "Bir katmandaki her kısmın yazdırılmaya başlanacağı yere yakın ko #: fdmprinter.def.json msgctxt "z_seam_corner label" msgid "Seam Corner Preference" -msgstr "" +msgstr "Dikiş Köşesi Tercihi" #: fdmprinter.def.json msgctxt "z_seam_corner description" msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner." -msgstr "" +msgstr "Modelin ana hatlarında yer alan köşelerin dikişin konumunu etkileyip etkilemediğini kontrol edin. Hiçbiri, köşelerin dikişin konumunu etkilemediği anlamına gelir. Dikişi Gizle, dikişin daha büyük olasılıkla bir iç köşe üzerinde oluşmasını sağlar. Dikişi Açığa Çıkar, dikişin daha büyük olasılıkla bir dış köşe üzerinde oluşmasını sağlar. Dikişi Gizle veya Açığa Çıkar, dikişin daha büyük olasılıkla bir iç veya dış köşe üzerinde oluşmasını sağlar." #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_none" msgid "None" -msgstr "" +msgstr "Hiçbiri" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_inner" msgid "Hide Seam" -msgstr "" +msgstr "Dikişi Gizle" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" -msgstr "" +msgstr "Dikişi Açığa Çıkar" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_any" msgid "Hide or Expose Seam" -msgstr "" +msgstr "Dikişi Gizle veya Açığa Çıkar" #: fdmprinter.def.json msgctxt "z_seam_relative label" @@ -1252,7 +1248,7 @@ msgstr "Dolgu Şekli" #: fdmprinter.def.json msgctxt "infill_pattern description" msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, cubic, octet, quarter cubic and concentric patterns are fully printed every layer. Cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction." -msgstr "" +msgstr "Yazdırma dolgu malzemesinin şeklidir. Hat ve zikzak dolgu, farklı katmanlar üzerinde yön değiştirerek malzeme maliyetini azaltır. Izgara, üçgen, kübik, sekizlik, çeyrek kübik ve eş merkezli şekiller, her katmanda tam olarak yazdırılır. Kübik, çeyrek kübik ve sekizlik dolgu, her yönde daha eşit bir kuvvet dağılımı sağlamak için her katmanda değişir." #: fdmprinter.def.json msgctxt "infill_pattern option grid" @@ -1282,12 +1278,12 @@ msgstr "Kübik Alt Bölüm" #: fdmprinter.def.json msgctxt "infill_pattern option tetrahedral" msgid "Octet" -msgstr "" +msgstr "Sekizlik" #: fdmprinter.def.json msgctxt "infill_pattern option quarter_cubic" msgid "Quarter Cubic" -msgstr "" +msgstr "Çeyrek Kübik" #: fdmprinter.def.json msgctxt "infill_pattern option concentric" @@ -1307,22 +1303,22 @@ msgstr "Zik Zak" #: fdmprinter.def.json msgctxt "infill_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Çapraz" #: fdmprinter.def.json msgctxt "infill_pattern option cross_3d" msgid "Cross 3D" -msgstr "" +msgstr "Çapraz 3D" #: fdmprinter.def.json msgctxt "zig_zaggify_infill label" msgid "Connect Infill Lines" -msgstr "" +msgstr "Dolgu Hatlarını Bağlayın" #: fdmprinter.def.json msgctxt "zig_zaggify_infill description" msgid "Connect the ends where the infill pattern meets the inner wall using a lines which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduces the effects on infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used." -msgstr "" +msgstr "İç duvarın şeklini takip eden bir hattı kullanarak, dolgu şeklinin iç duvarla buluştuğu noktada uçları bağlayın. Bu ayarın etkinleştirilmesi, dolgunun duvarlara daha iyi yapışmasını sağlayabilir ve dolgunun dikey yüzeylerin kalitesi üzerindeki etkilerini azaltır. Bu ayarın devre dışı bırakılması, kullanılan malzemenin miktarını azaltır." #: fdmprinter.def.json msgctxt "infill_angles label" @@ -1447,32 +1443,32 @@ msgstr "Bundan küçük dolgu alanları oluşturma (onun yerine yüzey kullan)." #: fdmprinter.def.json msgctxt "skin_preshrink label" msgid "Skin Removal Width" -msgstr "" +msgstr "Yüzey Kaldırma Genişliği" #: fdmprinter.def.json msgctxt "skin_preshrink description" msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "Kaldırılacak olan yüzey alanlarının en büyük genişliğidir. Bu değerden daha küçük olan her yüzey alanı kaybolacaktır. Bu, modeldeki eğimli yüzeylerde alt/üst yüzeyin yazdırılması için harcanan süreyi ve malzemeyi sınırlamaya yardımcı olabilir." #: fdmprinter.def.json msgctxt "top_skin_preshrink label" msgid "Top Skin Removal Width" -msgstr "" +msgstr "Üst Yüzey Kaldırma Genişliği" #: fdmprinter.def.json msgctxt "top_skin_preshrink description" msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model." -msgstr "" +msgstr "Kaldırılacak olan üst yüzey alanlarının en büyük genişliğidir. Bu değerden daha küçük olan her yüzey alanı kaybolacaktır. Bu, modeldeki eğimli yüzeylerde üst yüzeyin yazdırılması için harcanan süreyi ve malzemeyi sınırlamaya yardımcı olabilir." #: fdmprinter.def.json msgctxt "bottom_skin_preshrink label" msgid "Bottom Skin Removal Width" -msgstr "" +msgstr "Alt Yüzey Kaldırma Genişliği" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink description" msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "Kaldırılacak olan alt yüzey alanlarının en büyük genişliğidir. Bu değerden daha küçük olan her yüzey alanı kaybolacaktır. Bu, modeldeki eğimli yüzeylerde alt yüzeyin yazdırılması için harcanan süreyi ve malzemeyi sınırlamaya yardımcı olabilir." #: fdmprinter.def.json msgctxt "expand_skins_expand_distance label" @@ -1482,27 +1478,27 @@ msgstr "Yüzey Genişleme Mesafesi" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance description" msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "Yüzeylerin dolgunun içine doğru genişleyeceği mesafedir. Daha yüksek değerler, yüzeyin dolgu şekline daha iyi tutunmasını sağladığı gibi komşu katmanlardaki duvarların yüzeye daha iyi yapışmasını sağlar. Daha düşük değerler, kullanılan malzemenin miktarından tasarruf yapılmasını sağlar." #: fdmprinter.def.json msgctxt "top_skin_expand_distance label" msgid "Top Skin Expand Distance" -msgstr "" +msgstr "Üst Yüzey Genişleme Mesafesi" #: fdmprinter.def.json msgctxt "top_skin_expand_distance description" msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "Üst yüzeylerin dolgunun içine doğru genişleyeceği mesafedir. Daha yüksek değerler, yüzeyin dolgu şekline daha iyi tutunmasını sağladığı gibi yukarıdaki katmandaki duvarların yüzeye daha iyi yapışmasını sağlar. Daha düşük değerler, kullanılan malzemenin miktarından tasarruf yapılmasını sağlar." #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance label" msgid "Bottom Skin Expand Distance" -msgstr "" +msgstr "Alt Yüzey Genişleme Mesafesi" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance description" msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used." -msgstr "" +msgstr "Alt yüzeylerin dolgunun içine doğru genişleyeceği mesafedir. Daha yüksek değerler, yüzeyin dolgu şekline daha iyi tutunmasını sağladığı gibi yüzeyin aşağıdaki katmandaki duvara daha iyi yapışmasını sağlar. Daha düşük değerler, kullanılan malzemenin miktarından tasarruf yapılmasını sağlar." #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion label" @@ -2822,7 +2818,7 @@ msgstr "Zik Zak" #: fdmprinter.def.json msgctxt "support_pattern option cross" msgid "Cross" -msgstr "" +msgstr "Çapraz" #: fdmprinter.def.json msgctxt "support_connect_zigzags label" @@ -2837,32 +2833,32 @@ msgstr "Zikzakları Bağla Zik zak destek yapısının sağlamlığını artır #: fdmprinter.def.json msgctxt "support_skip_some_zags label" msgid "Break Up Support In Chunks" -msgstr "" +msgstr "Parçalarda Döküm Desteği" #: fdmprinter.def.json msgctxt "support_skip_some_zags description" msgid "Skip some support line connections to make the support structure easier to break away. This setting is applicable to the Zig Zag support infill pattern." -msgstr "" +msgstr "Destek yapısının daha kolay kırılması için bazı destek hattı bağlantılarını atlayın. Bu ayar, Zikzak destek dolgusu şekli için geçerlidir." #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm label" msgid "Support Chunk Size" -msgstr "" +msgstr "Destek Parçasının Boyutu" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm description" msgid "Leave out a connection between support lines once every N millimeter to make the support structure easier to break away." -msgstr "" +msgstr "Destek yapısının daha kolay kırılması için her N milimetresinde bir destek hatları arasında bağlantı atlayın." #: fdmprinter.def.json msgctxt "support_zag_skip_count label" msgid "Support Chunk Line Count" -msgstr "" +msgstr "Destek Parçası Hattı Sayısı" #: fdmprinter.def.json msgctxt "support_zag_skip_count description" msgid "Skip one in every N connection lines to make the support structure easier to break away." -msgstr "" +msgstr "Destek yapısının daha kolay kırılması için her N bağlantı hattında bir zikzak atlayın." #: fdmprinter.def.json msgctxt "support_infill_rate label" @@ -3404,9 +3400,7 @@ msgctxt "skirt_gap description" msgid "" "The horizontal distance between the skirt and the first layer of the print.\n" "This is the minimum distance, multiple skirt lines will extend outwards from this distance." -msgstr "" -"Etek ve baskının ilk katmanı arasındaki yatay mesafe.\n" -"Bu minimum mesafedir ve çoklu etek hatları bu mesafeden dışa doğru genişleyecektir." +msgstr "Etek ve baskının ilk katmanı arasındaki yatay mesafe.\nBu minimum mesafedir ve çoklu etek hatları bu mesafeden dışa doğru genişleyecektir." #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length label" @@ -3451,22 +3445,22 @@ msgstr "Sadece modelin dış kısmındaki kenarı yazdırır. Yatak yapışması #: fdmprinter.def.json msgctxt "z_offset_layer_0 label" msgid "Initial Layer Z Offset" -msgstr "" +msgstr "İlk Katman Z Ofseti" #: fdmprinter.def.json msgctxt "z_offset_layer_0 description" msgid "The extruder is offset from the normal height of the first layer by this amount. It can be positive (raised) or negative (lowered). Some filament types adhere to the build plate better if the extruder is raised slightly." -msgstr "" +msgstr "Ekstrüder, birinci katmanın normal yüksekliğinden bu miktarda mesafe bırakılır. Negatif (yükseltilmiş) veya pozitif (alçaltılmış) olabilir. Ekstrüderin hafifçe yükseltilmesi durumunda, bazı filaman türleri yapı levhasına daha iyi yapışır." #: fdmprinter.def.json msgctxt "z_offset_taper_layers label" msgid "Z Offset Taper Layers" -msgstr "" +msgstr "Z Ofseti Konik Katmanları" #: fdmprinter.def.json msgctxt "z_offset_taper_layers description" msgid "When non-zero, the Z offset is reduced to 0 over that many layers. A value of 0 means that the Z offset remains constant for all the layers in the print." -msgstr "" +msgstr "Sıfır olmadığında, Z ofseti birçok katman üzerinde 0’a düşürülür. 0 değeri, Z ofsetinin yazdırmada yer alan tüm katmanlarda sabit kalması anlamına gelir." #: fdmprinter.def.json msgctxt "raft_margin label" @@ -3481,12 +3475,12 @@ msgstr "Radye etkinleştirildiğinde, ayrıca radye verilen model etrafındaki e #: fdmprinter.def.json msgctxt "raft_smoothing label" msgid "Raft Smoothing" -msgstr "" +msgstr "Radye Düzeltme" #: fdmprinter.def.json msgctxt "raft_smoothing description" msgid "This setting control how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle." -msgstr "" +msgstr "Bu ayar, radye ana hattında yer alan iç köşelerin ne kadar yuvarlandığını kontrol eder. İç köşeler, burada belirtilen değere eşit yarıçapa sahip yarım daire şeklinde yuvarlanır. Ayrıca bu ayar, söz konusu daireden daha küçük olan radye ana hattındaki delikleri ortadan kaldırır." #: fdmprinter.def.json msgctxt "raft_airgap label" @@ -4166,12 +4160,12 @@ msgstr "Z dikişinin görünürlüğünü azaltmak için helezon şeklinde kontu #: fdmprinter.def.json msgctxt "relative_extrusion label" msgid "Relative Extrusion" -msgstr "" +msgstr "Bağıl Ekstrüzyon" #: fdmprinter.def.json msgctxt "relative_extrusion description" msgid "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the Gcode. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any Gcode script is output." -msgstr "" +msgstr "Mutlak ekstrüzyon yerine bağıl ekstrüzyon uygulayın. Bağıl E-adımlarının uygulanması, Gcode’un sonradan işlenmesini kolaylaştırır. Ancak bu, tüm yazıcılar tarafından desteklenmemektedir ve mutlak E-adımları ile karşılaştırıldığında birikmiş malzemenin miktarında hafif farklılıklar yaratabilir. Bu ayara bakılmaksızın, herhangi bir Gcode komut dosyası çıkartılmadan önce ekstrüzyon modu her zaman mutlak değere ayarlı olacaktır." #: fdmprinter.def.json msgctxt "experimental label" @@ -4186,12 +4180,12 @@ msgstr "deneysel!" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" -msgstr "" +msgstr "Duvar Yazdırma Sırasını Optimize Et" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order description" msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization." -msgstr "" +msgstr "Geri çekmelerin sayısını ve kat edilen mesafeyi azaltmak için duvarların yazdırıldığı sırayı optimize edin. Çoğu parça, bunun etkinleştirilmesinden yararlanır, ancak bazılarının yararlanması için gerçekte daha uzun bir süre gerekebilir. Bu yüzden, yazdırma süresi tahminlerini optimizasyonlu ve optimizasyonsuz olarak karşılaştırın." #: fdmprinter.def.json msgctxt "draft_shield_enabled label" @@ -4316,22 +4310,22 @@ msgstr "Üst/alt katmanların yazdırıldığı yönü değiştirin. Normal koş #: fdmprinter.def.json msgctxt "cross_infill_pocket_size label" msgid "Cross 3D Pocket Size" -msgstr "" +msgstr "Çapraz 3D Cebin Boyutu" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size description" msgid "The size of pockets at four-way crossings in the cross 3D pattern at heights where the pattern is touching itself." -msgstr "" +msgstr "Şeklin kendisine temas ettiği yüksekliklerde, çapraz 3D şekilde dört yönlü kesişme yerlerinde bulunan ceplerin boyutudur." #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly label" msgid "Alternate Cross 3D Pockets" -msgstr "" +msgstr "Çapraz 3D Cepleri Değiştir" #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly description" msgid "Only apply pockets at half of the four-way crossings in the cross 3D pattern and alternate the location of the pockets between heights where the pattern is touching itself." -msgstr "" +msgstr "Cepleri sadece çapraz 3D şekildeki dört yönlü kesişme yerlerinin yarısında uygulayın ve şeklin kendisine temas ettiği yüksekliklerin arasında ceplerin yerini değiştirin." #: fdmprinter.def.json msgctxt "spaghetti_infill_enabled label" @@ -4633,9 +4627,7 @@ msgctxt "wireframe_up_half_speed description" msgid "" "Distance of an upward move which is extruded with half speed.\n" "This can cause better adhesion to previous layers, while not heating the material in those layers too much. Only applies to Wire Printing." -msgstr "" -"Yarı hızda sıkıştırılmış yukarı doğru hareket mesafesi.\n" -"Bu katmanlarda malzemeyi çok fazla ısıtmayarak önceki katmanlarda daha iyi yapışma sağlayabilir. Sadece kablo yazdırmaya uygulanır." +msgstr "Yarı hızda sıkıştırılmış yukarı doğru hareket mesafesi.\nBu katmanlarda malzemeyi çok fazla ısıtmayarak önceki katmanlarda daha iyi yapışma sağlayabilir. Sadece kablo yazdırmaya uygulanır." #: fdmprinter.def.json msgctxt "wireframe_top_jump label" @@ -4755,12 +4747,12 @@ msgstr "Malzeme ekstrude edilmeden önce üst yüzey üzerinden bir kere daha ge #: fdmprinter.def.json msgctxt "ironing_only_highest_layer label" msgid "Iron Only Highest Layer" -msgstr "" +msgstr "Sadece En Yüksek Katmanı Ütüle" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer description" msgid "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish." -msgstr "" +msgstr "Ütüleme işlemini bileşimin sadece en son katmanı üzerinde gerçekleştirin. Bu, alt katmanlarda pürüzsüz bir yüzey tesviyesine gerek olmadığı durumlarda zaman kazandırır." #: fdmprinter.def.json msgctxt "ironing_pattern label" @@ -5124,4 +5116,4 @@ msgstr "Modeli dosyadan indirirken modele uygulanacak olan dönüşüm matrisi" #~ msgctxt "multiple_mesh_overlap label" #~ msgid "Dual Extrusion Overlap" -#~ msgstr "İkili Ekstrüzyon Çakışması" +#~ msgstr "İkili Ekstrüzyon Çakışması" \ No newline at end of file diff --git a/resources/i18n/zh_CN/cura.po b/resources/i18n/zh_CN/cura.po index 60e0139877..3fd9f30fd2 100644 --- a/resources/i18n/zh_CN/cura.po +++ b/resources/i18n/zh_CN/cura.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-28 11:00+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: PCDotFan , Bothof \n" "Language: zh_CN\n" @@ -26,7 +26,7 @@ msgstr "打印机设置" #: /home/ruben/Projects/Cura/plugins/XRayView/__init__.py:12 msgctxt "@item:inlistbox" msgid "X-Ray view" -msgstr "" +msgstr "透视视图" #: /home/ruben/Projects/Cura/plugins/X3DReader/__init__.py:13 msgctxt "@item:inlistbox" @@ -41,17 +41,17 @@ msgstr "GCode 文件" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:65 msgctxt "@action:button" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "使用 Doodle3D WiFi-Box 打印" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:66 msgctxt "@properties:tooltip" msgid "Print with Doodle3D WiFi-Box" -msgstr "" +msgstr "使用 Doodle3D WiFi-Box 打印" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:86 msgctxt "@info:status" msgid "Connecting to Doodle3D Connect" -msgstr "" +msgstr "连接至 Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:87 #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:155 @@ -75,32 +75,32 @@ msgstr "取消" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:154 msgctxt "@info:status" msgid "Sending data to Doodle3D Connect" -msgstr "" +msgstr "发送数据至 Doodle3D Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:161 msgctxt "@info:status" msgid "Unable to send data to Doodle3D Connect. Is another job still active?" -msgstr "" +msgstr "无法发送数据至 Doodle3D Connect。 是否有另一项作业仍在进行？" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:175 msgctxt "@info:status" msgid "Storing data on Doodle3D Connect" -msgstr "" +msgstr "在 Doodle3D Connect 中存储数据" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:213 msgctxt "@info:status" msgid "File sent to Doodle3D Connect" -msgstr "" +msgstr "已发送至 Doodle3D Connect 的文件" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@action:button" msgid "Open Connect.." -msgstr "" +msgstr "打开 Connect" #: /home/ruben/Projects/Cura/plugins/Doodle3D-cura-plugin/Doodle3D/D3DCloudPrintOutputDevicePlugin.py:214 msgctxt "@info:tooltip" msgid "Open the Doodle3D Connect web interface" -msgstr "" +msgstr "打开 Doodle3D Connect Web 界面" #: /home/ruben/Projects/Cura/plugins/ChangeLogPlugin/ChangeLog.py:35 msgctxt "@item:inmenu" @@ -145,7 +145,7 @@ msgstr "无法启动新作业，因为打印机处于忙碌状态或未连接。 #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:153 msgctxt "@info:title" msgid "Print Details" -msgstr "" +msgstr "打印品详细信息" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:status" @@ -155,7 +155,7 @@ msgstr "此打印机不支持通过 USB 打印，因为其使用 UltiGCode 类 #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:456 msgctxt "@info:title" msgid "USB Printing" -msgstr "" +msgstr "USB 打印" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:460 msgctxt "@info:status" @@ -170,7 +170,7 @@ msgstr "无法启动新作业，因为该打印机不支持通过 USB 打印。" #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1296 msgctxt "@info:title" msgid "Warning" -msgstr "" +msgstr "警告" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:108 msgctxt "@info" @@ -186,7 +186,7 @@ msgstr "在 %s 无法找到打印机所需的固件。" #: /home/ruben/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDeviceManager.py:122 msgctxt "@info:title" msgid "Printer Firmware" -msgstr "" +msgstr "打印机固件" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." @@ -203,25 +203,25 @@ msgstr "保存到可移动磁盘 {0}" #, python-brace-format msgctxt "@info:progress Don't translate the XML tags !" msgid "Saving to Removable Drive {0}" -msgstr "" +msgstr "保存到可移动磁盘 {0} " #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:89 msgctxt "@info:title" msgid "Saving" -msgstr "" +msgstr "正在保存" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:99 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:102 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not save to {0}: {1}" -msgstr "" +msgstr "无法保存到 {0}： {1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:118 #, python-brace-format msgctxt "@info:status Don't translate the tag {device}!" msgid "Could not find a file name when trying to write to {device}." -msgstr "" +msgstr "尝试写入到 {device} 时找不到文件名。" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:131 #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:146 @@ -238,7 +238,7 @@ msgstr "无法保存到可移动磁盘 {0}：{1}" #: /home/ruben/Projects/Cura/cura/CuraApplication.py:1305 msgctxt "@info:title" msgid "Error" -msgstr "" +msgstr "错误" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 #, python-brace-format @@ -249,7 +249,7 @@ msgstr "保存到可移动磁盘 {0} ：{1}" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140 msgctxt "@info:title" msgid "File Saved" -msgstr "" +msgstr "文件已保存" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141 msgctxt "@action:button" @@ -271,7 +271,7 @@ msgstr "已弹出 {0}。现在，您可以安全地拔出磁盘。" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:156 msgctxt "@info:title" msgid "Safely Remove Hardware" -msgstr "" +msgstr "安全移除硬件" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:158 #, python-brace-format @@ -306,7 +306,7 @@ msgstr "已发送打印机访问请求，请在打印机上批准该请求。" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:157 msgctxt "@info:title" msgid "Connection status" -msgstr "" +msgstr "连接状态" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:158 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:158 @@ -321,7 +321,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:500 msgctxt "@info:title" msgid "Connection Status" -msgstr "" +msgstr "连接状态" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:159 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:159 @@ -419,7 +419,7 @@ msgstr "打印机无法启动新的打印作业，当前的打印机状态为 %s #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:650 msgctxt "@info:title" msgid "Printer Status" -msgstr "" +msgstr "打印机状态" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:674 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:660 @@ -490,7 +490,7 @@ msgstr "向打印机发送数据" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:839 msgctxt "@info:title" msgid "Sending Data" -msgstr "" +msgstr "正在发送数据" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkPrinterOutputDevice.py:908 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkPrinterOutputDevice.py:890 @@ -549,73 +549,73 @@ msgstr "通过网络连接" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:103 msgid "This printer is not set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "这台打印机未设置为运行一组连接的 Ultimaker 3 打印机。" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:104 #, python-brace-format msgctxt "Count is number of printers." msgid "This printer is the host for a group of {count} connected Ultimaker 3 printers." -msgstr "" +msgstr "这台打印机是一组共 {count} 台已连接 Ultimaker 3 打印机的主机。" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:105 #, python-brace-format msgid "{printer_name} has finished printing '{job_name}'. Please collect the print and confirm clearing the build plate." -msgstr "" +msgstr "{printer_name} 已完成打印 '{job_name}'。 请收起打印品并确认清空打印平台。" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:106 #, python-brace-format msgid "{printer_name} is reserved to print '{job_name}'. Please change the printer's configuration to match the job, for it to start printing." -msgstr "" +msgstr "{printer_name} 已保留用于打印 '{job_name}'。 请更改打印机配置以匹配此项作业，以便开始打印。" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:196 msgctxt "@info:status" msgid "Sending new jobs (temporarily) blocked, still sending the previous print job." -msgstr "" +msgstr "发送新作业（暂时）受阻，仍在发送前一份打印作业。" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:212 msgctxt "@info:status" msgid "Unable to send new print job: this 3D printer is not (yet) set up to host a group of connected Ultimaker 3 printers." -msgstr "" +msgstr "无法发送新打印作业：此 3D 打印机（尚）未设置为运行一组连接的 Ultimaker 3 打印机。" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:425 #, python-brace-format msgctxt "@info:progress" msgid "Sending {file_name} to group {cluster_name}" -msgstr "" +msgstr "发送 {file_name} 至组 {cluster_name}" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:498 #, python-brace-format msgctxt "@info:status" msgid "Sent {file_name} to group {cluster_name}." -msgstr "" +msgstr "已发送 {file_name} 至组 {cluster_name}。" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:503 msgctxt "@action:button" msgid "Show print jobs" -msgstr "" +msgstr "显示打印作业" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:504 msgctxt "@info:tooltip" msgid "Opens the print jobs interface in your browser." -msgstr "" +msgstr "在您的浏览器中打开打印作业界面。" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/NetworkClusterPrinterOutputDevice.py:520 #, python-brace-format msgctxt "@info:status" msgid "Unable to send print job to group {cluster_name}." -msgstr "" +msgstr "无法发送打印作业至组 {cluster_name}。" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:71 #, python-brace-format msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!" msgid "To ensure that your {machine_name} is equipped with the latest features it is recommended to update the firmware regularly. This can be done on the {machine_name} (when connected to the network) or via USB." -msgstr "" +msgstr "为确保您的 {machine_name} 具备最新功能，建议定期更新固件。 更新可在 {machine_name} 上（连接至网络时）或通过 USB 进行。" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:72 #, python-format msgctxt "@info:title The %s gets replaced with the printer name." msgid "New %s firmware available" -msgstr "" +msgstr "新 %s 固件可用" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:73 #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:149 @@ -626,7 +626,7 @@ msgstr "下载" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:83 msgctxt "@info" msgid "Could not access update information." -msgstr "" +msgstr "无法获取更新信息。" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:199 msgctxt "@info:status" @@ -665,7 +665,7 @@ msgstr "Cura 收集匿名切片统计资料。 您可以在偏好设置中禁用 #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:46 msgctxt "@info:title" msgid "Collecting Data" -msgstr "" +msgstr "正在收集数据" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:48 msgctxt "@action:button" @@ -686,7 +686,7 @@ msgstr "GCode 文件" #: /home/ruben/Projects/Cura/plugins/LayerView/__init__.py:13 msgctxt "@item:inlistbox" msgid "Layer view" -msgstr "" +msgstr "分层视图" #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:93 msgctxt "@info:status" @@ -696,7 +696,7 @@ msgstr "当单线打印（Wire Printing）功能开启时，Cura 将无法准确 #: /home/ruben/Projects/Cura/plugins/LayerView/LayerView.py:94 msgctxt "@info:title" msgid "Layer View" -msgstr "" +msgstr "分层视图" #: /home/ruben/Projects/Cura/plugins/ImageReader/__init__.py:14 msgctxt "@item:inlistbox" @@ -726,7 +726,7 @@ msgstr "GIF 图像" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 msgctxt "@info:status" msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration." -msgstr "" +msgstr "无法使用当前材料进行切片，因为该材料与所选机器或配置不兼容。" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:269 #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:297 @@ -734,7 +734,7 @@ msgstr "" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:316 msgctxt "@info:title" msgid "Unable to slice" -msgstr "" +msgstr "无法切片" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:296 #, python-brace-format @@ -761,7 +761,7 @@ msgstr "正在处理层" #: /home/ruben/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:238 msgctxt "@info:title" msgid "Information" -msgstr "" +msgstr "信息" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14 msgctxt "@label" @@ -800,18 +800,18 @@ msgstr "喷嘴" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:28 msgctxt "@menuitem" msgid "Browse plugins" -msgstr "" +msgstr "浏览插件" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:163 #, python-brace-format msgctxt "@info:status" msgid "Failed to get plugin ID from {0}" -msgstr "" +msgstr "无法从 {0} 获取插件 ID" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:164 msgctxt "@info:tile" msgid "Warning" -msgstr "" +msgstr "警告" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.py:202 msgctxt "@window:title" @@ -821,7 +821,7 @@ msgstr "插件浏览器" #: /home/ruben/Projects/Cura/plugins/SolidView/__init__.py:12 msgctxt "@item:inmenu" msgid "Solid view" -msgstr "" +msgstr "实体视图" #: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:18 msgctxt "@item:inlistbox" @@ -837,7 +837,7 @@ msgstr "解析 G-code" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:370 msgctxt "@info:title" msgid "G-code Details" -msgstr "" +msgstr "G-code 详细信息" #: /home/ruben/Projects/Cura/plugins/GCodeReader/GCodeReader.py:368 msgctxt "@info:generic" @@ -919,7 +919,7 @@ msgstr "支撑" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:95 msgctxt "@tooltip" msgid "Skirt" -msgstr "" +msgstr "Skirt" #: /home/ruben/Projects/Cura/cura/PrintInformation.py:96 msgctxt "@tooltip" @@ -960,7 +960,7 @@ msgstr "正在为模型寻找新位置" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:34 msgctxt "@info:title" msgid "Finding Location" -msgstr "" +msgstr "正在寻找位置" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:89 #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 @@ -971,7 +971,7 @@ msgstr "无法在成形空间体积内放下全部模型" #: /home/ruben/Projects/Cura/cura/ArrangeObjectsJob.py:90 msgctxt "@info:title" msgid "Can't Find Location" -msgstr "" +msgstr "找不到位置" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:431 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:112 @@ -984,7 +984,7 @@ msgstr "文件已存在" #, python-brace-format msgctxt "@label Don't translate the XML tag !" msgid "The file {0} already exists. Are you sure you want to overwrite it?" -msgstr "" +msgstr "文件 {0} 已存在。 您确定要替换它吗？" #: /home/ruben/Projects/Cura/cura/Settings/ContainerManager.py:815 msgctxt "@label" @@ -1026,24 +1026,24 @@ msgstr "撤销更改材料直径。" #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to export profile to {0}: {1}" -msgstr "" +msgstr "无法将配置文件导出至 {0} ： {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:150 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Failed to export profile to {0}: Writer plugin reported failure." -msgstr "" +msgstr "无法将配置文件导出至 {0} ： 写入器插件报告故障。" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:155 #, python-brace-format msgctxt "@info:status Don't translate the XML tag !" msgid "Exported profile to {0}" -msgstr "" +msgstr "配置文件已导出至： {0} " #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156 msgctxt "@info:title" msgid "Export Details" -msgstr "" +msgstr "导出详细信息" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:182 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:204 @@ -1052,7 +1052,7 @@ msgstr "" #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "Failed to import profile from {0}: {1}" -msgstr "" +msgstr "无法从 {0} 导入配置文件： {1}" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:215 #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:251 @@ -1091,7 +1091,7 @@ msgstr "由于“打印序列”设置的值，成形空间体积高度已被减 #: /home/ruben/Projects/Cura/cura/BuildVolume.py:102 msgctxt "@info:title" msgid "Build Volume" -msgstr "" +msgstr "成形空间体积" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:34 msgctxt "@info:status" @@ -1102,7 +1102,7 @@ msgstr "复制并放置模型" #: /home/ruben/Projects/Cura/cura/MultiplyObjectsJob.py:83 msgctxt "@info:title" msgid "Placing Object" -msgstr "" +msgstr "放置模型" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:54 msgctxt "@title:window" @@ -1115,9 +1115,7 @@ msgid "" "

A fatal exception has occurred that we could not recover from!

\n" "

Please use the information below to post a bug report at http://github.com/Ultimaker/Cura/issues

\n" " " -msgstr "" -"

发生了致命错误，我们无法恢复！

\n" -"

请在以下网址中使用下方的信息提交错误报告：http://github.com/Ultimaker/Cura/issues

" +msgstr "

发生了致命错误，我们无法恢复！

\n

请在以下网址中使用下方的信息提交错误报告：http://github.com/Ultimaker/Cura/issues

" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:112 msgctxt "@action:button" @@ -1419,10 +1417,7 @@ msgid "" "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer.\n" "\n" "Select your printer from the list below:" -msgstr "" -"要通过网络向打印机发送打印请求，请确保您的打印机已通过网线或 WIFI 连接到网络。若您不能连接 Cura 与打印机，您仍然可以使用 USB 设备将 G-code 文件传输到打印机。\n" -"\n" -"从以下列表中选择您的打印机：" +msgstr "要通过网络向打印机发送打印请求，请确保您的打印机已通过网线或 WIFI 连接到网络。若您不能连接 Cura 与打印机，您仍然可以使用 USB 设备将 G-code 文件传输到打印机。\n\n从以下列表中选择您的打印机：" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:75 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:75 @@ -1548,17 +1543,17 @@ msgstr "应用配置" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:284 msgctxt "@label" msgid "This printer is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "这台打印机未设置为运行一组连接的 Ultimaker 3 打印机" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/DiscoverUM3Action.qml:287 msgctxt "@label" msgid "This printer is the host for a group of %1 connected Ultimaker 3 printers" -msgstr "" +msgstr "这台打印机是一组 %1 台已连接 Ultimaker 3 打印机的主机" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:24 msgctxt "@title:window" msgid "Print over network" -msgstr "" +msgstr "通过网络打印" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/PrintWindow.qml:92 msgctxt "@action:button" @@ -1568,98 +1563,98 @@ msgstr "打印" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:50 msgctxt "@label: arg 1 is group name" msgid "%1 is not set up to host a group of connected Ultimaker 3 printers" -msgstr "" +msgstr "%1 未设置为运行一组连接的 Ultimaker 3 打印机" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:311 msgctxt "@label:status" msgid "Printing" -msgstr "" +msgstr "打印" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:315 msgctxt "@label:status" msgid "Reserved" -msgstr "" +msgstr "保留" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:317 msgctxt "@label:status" msgid "Finished" -msgstr "" +msgstr "已完成" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:320 msgctxt "@label:status" msgid "Preparing" -msgstr "" +msgstr "准备" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:327 msgctxt "@label:status" msgid "Available" -msgstr "" +msgstr "可用" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:367 msgctxt "@label" msgid "Completed on: " -msgstr "" +msgstr "完成时间： " #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:371 msgctxt "@label" msgid "Clear build plate" -msgstr "" +msgstr "清空打印平台" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:375 msgctxt "@label" msgid "Preparing to print" -msgstr "" +msgstr "准备打印" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterMonitorItem.qml:379 msgctxt "@label" msgid "Not accepting print jobs" -msgstr "" +msgstr "不接受打印作业" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:14 msgctxt "@info:tooltip" msgid "Opens the print jobs page with your default web browser." -msgstr "" +msgstr "使用默认 Web 浏览器打开打印作业页面。" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/OpenPanelButton.qml:15 #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:154 msgctxt "@action:button" msgid "View print jobs" -msgstr "" +msgstr "查看打印作业" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:36 msgctxt "@label" msgid "PRINTER GROUP" -msgstr "" +msgstr "打印机组" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:69 msgctxt "@title" msgid "Print jobs" -msgstr "" +msgstr "打印作业" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:100 msgctxt "@label" msgid "Printing" -msgstr "" +msgstr "打印" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:118 msgctxt "@label" msgid "Queued" -msgstr "" +msgstr "已排队" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:135 msgctxt "@label" msgid "Waiting for configuration change" -msgstr "" +msgstr "正在等待配置更改" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:194 msgctxt "@label:title" msgid "Printers" -msgstr "" +msgstr "打印机" #: /home/ruben/Projects/Cura/plugins/CuraPrintClusterUpload/ClusterControlItem.qml:247 msgctxt "@action:button" msgid "View printers" -msgstr "" +msgstr "查看打印机" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/ConfigDialog.qml:20 msgctxt "@title:window" @@ -2048,7 +2043,7 @@ msgstr "已安装" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:199 msgctxt "@title:window" msgid "Plugin License Agreement" -msgstr "" +msgstr "插件许可协议" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:220 msgctxt "@label" @@ -2056,17 +2051,17 @@ msgid "" " plugin contains a license.\n" "You need to accept this license to install this plugin.\n" "Do you agree with the terms below?" -msgstr "" +msgstr " 插件包含一个许可。\n您需要接受此许可才能安装此插件。\n是否同意下列条款？" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:242 msgctxt "@action:button" msgid "Accept" -msgstr "" +msgstr "接受" #: /home/ruben/Projects/Cura/plugins/PluginBrowser/PluginBrowser.qml:253 msgctxt "@action:button" msgid "Decline" -msgstr "" +msgstr "拒绝" #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UM2UpgradeSelectionMachineAction.qml:25 #: /home/ruben/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:25 @@ -2321,9 +2316,7 @@ msgctxt "@text:window" msgid "" "You have customized some profile settings.\n" "Would you like to keep or discard those settings?" -msgstr "" -"您已自定义某些配置文件设置。\n" -"您想保留或舍弃这些设置吗？" +msgstr "您已自定义某些配置文件设置。\n您想保留或舍弃这些设置吗？" #: /home/ruben/Projects/Cura/resources/qml/DiscardOrKeepProfileChangesDialog.qml:110 msgctxt "@title:column" @@ -2907,12 +2900,12 @@ msgstr "导入配置" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:320 msgctxt "@info:status Don't translate the XML tags or !" msgid "Could not import material %1: %2" -msgstr "" +msgstr "无法导入材料 %1： %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:324 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully imported material %1" -msgstr "" +msgstr "成功导入材料 %1" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:343 #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:358 @@ -2923,12 +2916,12 @@ msgstr "导出材料" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:362 msgctxt "@info:status Don't translate the XML tags and !" msgid "Failed to export material to %1: %2" -msgstr "" +msgstr "无法导出材料至 %1： %2" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:368 msgctxt "@info:status Don't translate the XML tag !" msgid "Successfully exported material to %1" -msgstr "" +msgstr "成功导出材料至： %1" #: /home/ruben/Projects/Cura/resources/qml/AddMachineDialog.qml:18 #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:766 @@ -2961,9 +2954,7 @@ msgctxt "@info:credit" msgid "" "Cura is developed by Ultimaker B.V. in cooperation with the community.\n" "Cura proudly uses the following open source projects:" -msgstr "" -"Cura 由 Ultimaker B.V. 与社区合作开发。\n" -"Cura 使用以下开源项目：" +msgstr "Cura 由 Ultimaker B.V. 与社区合作开发。\nCura 使用以下开源项目：" #: /home/ruben/Projects/Cura/resources/qml/AboutDialog.qml:118 msgctxt "@label" @@ -3066,10 +3057,7 @@ msgid "" "Some setting/override values are different from the values stored in the profile.\n" "\n" "Click to open the profile manager." -msgstr "" -"某些设置/重写值与存储在配置文件中的值不同。\n" -"\n" -"点击打开配置文件管理器。" +msgstr "某些设置/重写值与存储在配置文件中的值不同。\n\n点击打开配置文件管理器。" #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingView.qml:145 msgctxt "@label:textbox" @@ -3107,10 +3095,7 @@ msgid "" "Some hidden settings use values different from their normal calculated value.\n" "\n" "Click to make these settings visible." -msgstr "" -"一些隐藏设置正在使用有别于一般设置的计算值。\n" -"\n" -"单击以使这些设置可见。" +msgstr "一些隐藏设置正在使用有别于一般设置的计算值。\n\n单击以使这些设置可见。" #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:62 msgctxt "@label Header for list of settings." @@ -3138,10 +3123,7 @@ msgid "" "This setting has a value that is different from the profile.\n" "\n" "Click to restore the value of the profile." -msgstr "" -"此设置的值与配置文件不同。\n" -"\n" -"单击以恢复配置文件的值。" +msgstr "此设置的值与配置文件不同。\n\n单击以恢复配置文件的值。" #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:284 msgctxt "@label" @@ -3149,10 +3131,7 @@ msgid "" "This setting is normally calculated, but it currently has an absolute value set.\n" "\n" "Click to restore the calculated value." -msgstr "" -"此设置通常可被自动计算，但其当前已被绝对定义。\n" -"\n" -"单击以恢复自动计算的值。" +msgstr "此设置通常可被自动计算，但其当前已被绝对定义。\n\n单击以恢复自动计算的值。" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:118 msgctxt "@label:listbox" @@ -3164,9 +3143,7 @@ msgctxt "@label:listbox" msgid "" "Print Setup disabled\n" "G-code files cannot be modified" -msgstr "" -"打印设置已禁用\n" -"G-code 文件无法被修改" +msgstr "打印设置已禁用\nG-code 文件无法被修改" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:326 msgctxt "@label" @@ -3176,22 +3153,22 @@ msgstr "00 小时 00 分" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:344 msgctxt "@tooltip" msgid "Time information" -msgstr "" +msgstr "时间信息" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:370 msgctxt "@description" msgid "Print time" -msgstr "" +msgstr "打印时间" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:409 msgctxt "@label" msgid "%1m / ~ %2g / ~ %4 %3" -msgstr "" +msgstr "%1m / ~ %2g / ~ %4 %3" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:414 msgctxt "@label" msgid "%1m / ~ %2g" -msgstr "" +msgstr "%1m / ~ %2g" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:476 msgctxt "@tooltip" @@ -3249,12 +3226,12 @@ msgstr "没有连接打印机" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:157 msgctxt "@label" msgid "Extruder" -msgstr "" +msgstr "挤出机" #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:120 msgctxt "@tooltip" msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off." -msgstr "" +msgstr "热端的目标温度。 热端将加热或冷却至此温度。 如果目标温度为 0，则热端加热将关闭。" #: /home/ruben/Projects/Cura/resources/qml/PrintMonitor.qml:152 msgctxt "@tooltip" @@ -3720,27 +3697,27 @@ msgstr "准备" #: /home/ruben/Projects/Cura/resources/qml/Topbar.qml:79 msgctxt "@title:tab" msgid "Monitor" -msgstr "" +msgstr "监控" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:50 msgctxt "@label" msgid "Layer Height" -msgstr "" +msgstr "层高" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:62 msgctxt "@label" msgid "Print Speed" -msgstr "" +msgstr "打印速度" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:73 msgctxt "@label" msgid "Slower" -msgstr "" +msgstr "更慢" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:85 msgctxt "@label" msgid "Faster" -msgstr "" +msgstr "更快" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:416 msgctxt "@label" @@ -3755,7 +3732,7 @@ msgstr "渐层填充（Gradual infill）将随着打印高度的提升而逐渐 #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:602 msgctxt "@label" msgid "Enable gradual" -msgstr "" +msgstr "启用渐层" #: /home/ruben/Projects/Cura/resources/qml/SidebarSimple.qml:668 msgctxt "@label" @@ -3831,7 +3808,7 @@ msgstr "材料" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:374 msgctxt "@label" msgid "Check material compatibility" -msgstr "" +msgstr "检查材料兼容性" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:394 msgctxt "@tooltip" @@ -3891,12 +3868,12 @@ msgstr "God 模式" #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "description" msgid "Accepts G-Code and sends them over WiFi to a Doodle3D WiFi-Box." -msgstr "" +msgstr "接受 G-Code 并通过 WiFi 将其发送到 Doodle3D WiFi-Box。" #: Doodle3D-cura-plugin/Doodle3D/plugin.json msgctxt "name" msgid "Doodle3D WiFi-Box" -msgstr "" +msgstr "Doodle3D WiFi-Box" #: ChangeLogPlugin/plugin.json msgctxt "description" @@ -3951,17 +3928,17 @@ msgstr "UM3 网络连接" #: CuraPrintClusterUpload/plugin.json msgctxt "name" msgid "UM3 Network Connection (Cluster)" -msgstr "" +msgstr "UM3 网络连接（群集）" #: FirmwareUpdateChecker/plugin.json msgctxt "description" msgid "Checks for firmware updates." -msgstr "" +msgstr "检查以进行固件更新。" #: FirmwareUpdateChecker/plugin.json msgctxt "name" msgid "Firmware Update Checker" -msgstr "" +msgstr "固件更新检查程序" #: CuraSolidWorksPlugin/plugin.json msgctxt "description" @@ -4056,12 +4033,12 @@ msgstr "版本自 2.5 升级到 2.6" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "description" msgid "Upgrades configurations from Cura 2.7 to Cura 3.0." -msgstr "" +msgstr "将配置从 Cura 2.7 版本升级至 3.0 版本。" #: VersionUpgrade/VersionUpgrade27to30/plugin.json msgctxt "name" msgid "Version Upgrade 2.7 to 3.0" -msgstr "" +msgstr "版本自 2.7 升级到 3.0" #: VersionUpgrade/VersionUpgrade26to27/plugin.json msgctxt "description" @@ -4689,4 +4666,4 @@ msgstr "Cura 配置文件读取器" #~ msgctxt "@label" #~ msgid "Print Selected Model with %1" #~ msgid_plural "Print Selected Models With %1" -#~ msgstr[0] "用 %1 打印所选模型" +#~ msgstr[0] "用 %1 打印所选模型" \ No newline at end of file diff --git a/resources/i18n/zh_CN/fdmprinter.def.json.po b/resources/i18n/zh_CN/fdmprinter.def.json.po index afeff326f8..78650174db 100644 --- a/resources/i18n/zh_CN/fdmprinter.def.json.po +++ b/resources/i18n/zh_CN/fdmprinter.def.json.po @@ -8,7 +8,7 @@ msgstr "" "Project-Id-Version: Cura 3.0\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" "POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-08-28 11:00+0200\n" +"PO-Revision-Date: 2017-09-27 12:27+0200\n" "Last-Translator: Bothof \n" "Language-Team: PCDotFan , Bothof \n" "Language: zh_CN\n" @@ -58,9 +58,7 @@ msgctxt "machine_start_gcode description" msgid "" "Gcode commands to be executed at the very start - separated by \n" "." -msgstr "" -"在开始后执行的 G-code 命令 - 以 \n" -" 分行" +msgstr "在开始后执行的 G-code 命令 - 以 \n 分行" #: fdmprinter.def.json msgctxt "machine_end_gcode label" @@ -72,9 +70,7 @@ msgctxt "machine_end_gcode description" msgid "" "Gcode commands to be executed at the very end - separated by \n" "." -msgstr "" -"在结束前执行的 G-code 命令 - 以 \n" -" 分行" +msgstr "在结束前执行的 G-code 命令 - 以 \n 分行" #: fdmprinter.def.json msgctxt "material_guid label" @@ -1124,7 +1120,7 @@ msgstr "随机" #: fdmprinter.def.json msgctxt "z_seam_type option sharpest_corner" msgid "Sharpest Corner" -msgstr "" +msgstr "最尖角" #: fdmprinter.def.json msgctxt "z_seam_x label" @@ -1149,32 +1145,32 @@ msgstr "位置的 Y 轴坐标，在该位置附近开始打印层中各个部分 #: fdmprinter.def.json msgctxt "z_seam_corner label" msgid "Seam Corner Preference" -msgstr "" +msgstr "缝隙角偏好设置" #: fdmprinter.def.json msgctxt "z_seam_corner description" msgid "Control whether corners on the model outline influence the position of the seam. None means that corners have no influence on the seam position. Hide Seam makes the seam more likely to occur on an inside corner. Expose Seam makes the seam more likely to occur on an outside corner. Hide or Expose Seam makes the seam more likely to occur at an inside or outside corner." -msgstr "" +msgstr "控制模型轮廓上的各个角是否影响缝隙的位置。 “无”意味着各个角不影响缝隙位置。 “隐藏缝隙”会使缝隙更可能出现在内侧角上。 “外露缝隙”会使缝隙更可能出现在外侧角上。 “隐藏或外露缝隙”会使缝隙更可能出现在内侧或外侧角上。" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_none" msgid "None" -msgstr "" +msgstr "无" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_inner" msgid "Hide Seam" -msgstr "" +msgstr "隐藏缝隙" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_outer" msgid "Expose Seam" -msgstr "" +msgstr "外露缝隙" #: fdmprinter.def.json msgctxt "z_seam_corner option z_seam_corner_any" msgid "Hide or Expose Seam" -msgstr "" +msgstr "隐藏或外露缝隙" #: fdmprinter.def.json msgctxt "z_seam_relative label" @@ -1254,7 +1250,7 @@ msgstr "填充图案" #: fdmprinter.def.json msgctxt "infill_pattern description" msgid "The pattern of the infill material of the print. The line and zig zag infill swap direction on alternate layers, reducing material cost. The grid, triangle, cubic, octet, quarter cubic and concentric patterns are fully printed every layer. Cubic, quarter cubic and octet infill change with every layer to provide a more equal distribution of strength over each direction." -msgstr "" +msgstr "打印填充材料的图案。 线条和锯齿形填充在交替层上交换方向，从而降低材料成本。 网格、三角形、立方体、八角形、四面体和同心图案在每层完整打印。 立方体、四面体和八角形填充随每层变化，以在各个方向提供更均衡的强度分布。" #: fdmprinter.def.json msgctxt "infill_pattern option grid" @@ -1284,12 +1280,12 @@ msgstr "立方体分区" #: fdmprinter.def.json msgctxt "infill_pattern option tetrahedral" msgid "Octet" -msgstr "" +msgstr "八角形" #: fdmprinter.def.json msgctxt "infill_pattern option quarter_cubic" msgid "Quarter Cubic" -msgstr "" +msgstr "四面体" #: fdmprinter.def.json msgctxt "infill_pattern option concentric" @@ -1309,22 +1305,22 @@ msgstr "锯齿状" #: fdmprinter.def.json msgctxt "infill_pattern option cross" msgid "Cross" -msgstr "" +msgstr "交叉" #: fdmprinter.def.json msgctxt "infill_pattern option cross_3d" msgid "Cross 3D" -msgstr "" +msgstr "交叉 3D" #: fdmprinter.def.json msgctxt "zig_zaggify_infill label" msgid "Connect Infill Lines" -msgstr "" +msgstr "连接填充走线" #: fdmprinter.def.json msgctxt "zig_zaggify_infill description" msgid "Connect the ends where the infill pattern meets the inner wall using a lines which follows the shape of the inner wall. Enabling this setting can make the infill adhere to the walls better and reduces the effects on infill on the quality of vertical surfaces. Disabling this setting reduces the amount of material used." -msgstr "" +msgstr "使用沿内壁形状的走线连接填充图案与内壁相接的各端。 启用此设置会使填充更好地粘着在壁上，减少填充物效果对垂直表面质量的影响。 禁用此设置可减少使用的材料量。" #: fdmprinter.def.json msgctxt "infill_angles label" @@ -1449,32 +1445,32 @@ msgstr "不要生成小于此面积的填充区域（使用皮肤取代）。" #: fdmprinter.def.json msgctxt "skin_preshrink label" msgid "Skin Removal Width" -msgstr "" +msgstr "肤移除宽度" #: fdmprinter.def.json msgctxt "skin_preshrink description" msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "将被移除的皮肤区域的最大宽度。 小于此值的所有皮肤区域都将消失。 这有助于限制在模型的倾斜表面打印顶部/底部皮肤时所耗用的时间和材料。" #: fdmprinter.def.json msgctxt "top_skin_preshrink label" msgid "Top Skin Removal Width" -msgstr "" +msgstr "顶部皮肤移除宽度" #: fdmprinter.def.json msgctxt "top_skin_preshrink description" msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model." -msgstr "" +msgstr "将被移除的顶部皮肤区域的最大宽度。 小于此值的所有皮肤区域都将消失。 这有助于限制在模型的倾斜表面打印顶部皮肤时所耗用的时间和材料。" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink label" msgid "Bottom Skin Removal Width" -msgstr "" +msgstr "底部皮肤移除宽度" #: fdmprinter.def.json msgctxt "bottom_skin_preshrink description" msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model." -msgstr "" +msgstr "将被移除的底部皮肤区域的最大宽度。 小于此值的所有皮肤区域都将消失。 这有助于限制在模型的倾斜表面打印底部皮肤时所耗用的时间和材料。" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance label" @@ -1484,27 +1480,27 @@ msgstr "皮肤扩展距离" #: fdmprinter.def.json msgctxt "expand_skins_expand_distance description" msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "皮肤扩展到填充物中的距离。 值越大会让皮肤与填充图案更好地附着，并让相邻层的层壁与皮肤更好地粘着。 较低的值将节省所用的材料量。" #: fdmprinter.def.json msgctxt "top_skin_expand_distance label" msgid "Top Skin Expand Distance" -msgstr "" +msgstr "顶部皮肤扩展距离" #: fdmprinter.def.json msgctxt "top_skin_expand_distance description" msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used." -msgstr "" +msgstr "顶部皮肤扩展到填充物中的距离。 值越大会让皮肤与填充图案更好地附着，并让上方层的层壁与皮肤更好地粘着。 较低的值将节省所用的材料量。" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance label" msgid "Bottom Skin Expand Distance" -msgstr "" +msgstr "底部皮肤扩展距离" #: fdmprinter.def.json msgctxt "bottom_skin_expand_distance description" msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used." -msgstr "" +msgstr "底部皮肤扩展到填充物中的距离。 值越大会让皮肤与填充图案更好地附着，并让皮肤与下面层的壁更好地粘着。 较低的值将节省所用的材料量。" #: fdmprinter.def.json msgctxt "max_skin_angle_for_expansion label" @@ -2824,7 +2820,7 @@ msgstr "锯齿形" #: fdmprinter.def.json msgctxt "support_pattern option cross" msgid "Cross" -msgstr "" +msgstr "交叉" #: fdmprinter.def.json msgctxt "support_connect_zigzags label" @@ -2839,32 +2835,32 @@ msgstr "连接锯齿形。 这将增加锯齿形支撑结构的强度。" #: fdmprinter.def.json msgctxt "support_skip_some_zags label" msgid "Break Up Support In Chunks" -msgstr "" +msgstr "将支撑结构分拆成块状" #: fdmprinter.def.json msgctxt "support_skip_some_zags description" msgid "Skip some support line connections to make the support structure easier to break away. This setting is applicable to the Zig Zag support infill pattern." -msgstr "" +msgstr "跳过部分支撑线连接，让支撑结构更容易脱离。 此设置适用于锯齿形支撑结构填充图案。" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm label" msgid "Support Chunk Size" -msgstr "" +msgstr "支撑块大小" #: fdmprinter.def.json msgctxt "support_skip_zag_per_mm description" msgid "Leave out a connection between support lines once every N millimeter to make the support structure easier to break away." -msgstr "" +msgstr "每隔 N 毫米在支撑线之间略去一个连接,让支撑结构更容易脱离。" #: fdmprinter.def.json msgctxt "support_zag_skip_count label" msgid "Support Chunk Line Count" -msgstr "" +msgstr "支撑块走线数" #: fdmprinter.def.json msgctxt "support_zag_skip_count description" msgid "Skip one in every N connection lines to make the support structure easier to break away." -msgstr "" +msgstr "每隔 N 个连接线跳过一个连接，让支撑结构更容易脱离。" #: fdmprinter.def.json msgctxt "support_infill_rate label" @@ -3406,9 +3402,7 @@ msgctxt "skirt_gap description" msgid "" "The horizontal distance between the skirt and the first layer of the print.\n" "This is the minimum distance, multiple skirt lines will extend outwards from this distance." -msgstr "" -"skirt 和打印第一层之间的水平距离。\n" -"这是最小距离，多个 skirt 走线将从此距离向外延伸。" +msgstr "skirt 和打印第一层之间的水平距离。\n这是最小距离，多个 skirt 走线将从此距离向外延伸。" #: fdmprinter.def.json msgctxt "skirt_brim_minimal_length label" @@ -3453,22 +3447,22 @@ msgstr "仅在模型外部打印 brim。 这会减少您之后需要移除的 br #: fdmprinter.def.json msgctxt "z_offset_layer_0 label" msgid "Initial Layer Z Offset" -msgstr "" +msgstr "起始层 Z 偏移量" #: fdmprinter.def.json msgctxt "z_offset_layer_0 description" msgid "The extruder is offset from the normal height of the first layer by this amount. It can be positive (raised) or negative (lowered). Some filament types adhere to the build plate better if the extruder is raised slightly." -msgstr "" +msgstr "此值为挤出机与第一层正常高度之间的偏移量。 该值可以为正（升起），也可以为负（降下）。 如果挤出机略微升起，部分耗材类型会与打印平台实现更好的粘着。" #: fdmprinter.def.json msgctxt "z_offset_taper_layers label" msgid "Z Offset Taper Layers" -msgstr "" +msgstr "Z 偏移锥形层" #: fdmprinter.def.json msgctxt "z_offset_taper_layers description" msgid "When non-zero, the Z offset is reduced to 0 over that many layers. A value of 0 means that the Z offset remains constant for all the layers in the print." -msgstr "" +msgstr "当非零时，Z 偏移在多个层中逐步降至零。 值为 0 则表示，在打印品的各个层中 Z 偏移量保持不变。" #: fdmprinter.def.json msgctxt "raft_margin label" @@ -3483,12 +3477,12 @@ msgstr "如果启用了 raft，则这是指也被提供了 raft 的模型周围 #: fdmprinter.def.json msgctxt "raft_smoothing label" msgid "Raft Smoothing" -msgstr "" +msgstr "Raft 平滑度" #: fdmprinter.def.json msgctxt "raft_smoothing description" msgid "This setting control how much inner corners in the raft outline are rounded. Inward corners are rounded to a semi circle with a radius equal to the value given here. This setting also removes holes in the raft outline which are smaller than such a circle." -msgstr "" +msgstr "该设置控制 Raft 轮廓中的内角呈圆形的程度。 内向角被设置为半圆形，半径等于此处的值。 此设置还会移除 raft 轮廓中小于此半圆形的孔。" #: fdmprinter.def.json msgctxt "raft_airgap label" @@ -4168,12 +4162,12 @@ msgstr "平滑螺旋轮廓以减少 Z 缝的可见性（Z 缝应在打印品上 #: fdmprinter.def.json msgctxt "relative_extrusion label" msgid "Relative Extrusion" -msgstr "" +msgstr "相对挤出" #: fdmprinter.def.json msgctxt "relative_extrusion description" msgid "Use relative extrusion rather than absolute extrusion. Using relative E-steps makes for easier post-processing of the Gcode. However, it's not supported by all printers and it may produce very slight deviations in the amount of deposited material compared to absolute E-steps. Irrespective of this setting, the extrusion mode will always be set to absolute before any Gcode script is output." -msgstr "" +msgstr "使用相对挤出而不是绝对挤出。 使用相对 E 步阶，对 Gcode 进行更轻松的后期处理。 但是，不是所有打印机均支持此功能，而且与绝对 E 步阶相比，它在沉积材料量上会产生非常轻微的偏差。 不论是否有此设置，挤出模式将始终设置为绝对挤出后才会输出任何 Gcode 脚本。" #: fdmprinter.def.json msgctxt "experimental label" @@ -4188,12 +4182,12 @@ msgstr "实验性！" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order label" msgid "Optimize Wall Printing Order" -msgstr "" +msgstr "优化壁打印顺序" #: fdmprinter.def.json msgctxt "optimize_wall_printing_order description" msgid "Optimize the order in which walls are printed so as to reduce the number of retractions and the distance travelled. Most parts will benefit from this being enabled but some may actually take longer so please compare the print time estimates with and without optimization." -msgstr "" +msgstr "优化打印各个壁的顺序，以减少回抽次数和空驶距离。 启用此设置将对大部分零件有益，但有的则会耗费更长时间，因此请将优化和不优化的打印时间估计值进行对比。" #: fdmprinter.def.json msgctxt "draft_shield_enabled label" @@ -4318,22 +4312,22 @@ msgstr "交替打印顶部/底部层的方向。 通常它们只进行对角线 #: fdmprinter.def.json msgctxt "cross_infill_pocket_size label" msgid "Cross 3D Pocket Size" -msgstr "" +msgstr "交叉 3D 气槽大小" #: fdmprinter.def.json msgctxt "cross_infill_pocket_size description" msgid "The size of pockets at four-way crossings in the cross 3D pattern at heights where the pattern is touching itself." -msgstr "" +msgstr "交叉 3D 图案的四向交叉处的气槽大小，高度为图案与自身接触的位置。" #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly label" msgid "Alternate Cross 3D Pockets" -msgstr "" +msgstr "交替交叉 3D 气槽" #: fdmprinter.def.json msgctxt "cross_infill_apply_pockets_alternatingly description" msgid "Only apply pockets at half of the four-way crossings in the cross 3D pattern and alternate the location of the pockets between heights where the pattern is touching itself." -msgstr "" +msgstr "仅在交叉 3D 图案的一半四向交叉处应用气槽，并在图案与自身接触的高度之间交替气槽的位置。" #: fdmprinter.def.json msgctxt "spaghetti_infill_enabled label" @@ -4635,9 +4629,7 @@ msgctxt "wireframe_up_half_speed description" msgid "" "Distance of an upward move which is extruded with half speed.\n" "This can cause better adhesion to previous layers, while not heating the material in those layers too much. Only applies to Wire Printing." -msgstr "" -"以半速挤出的上行移动的距离。\n" -"这会与之前的层产生更好的附着，而不会将这些层中的材料过度加热。 仅应用于单线打印。" +msgstr "以半速挤出的上行移动的距离。\n这会与之前的层产生更好的附着，而不会将这些层中的材料过度加热。 仅应用于单线打印。" #: fdmprinter.def.json msgctxt "wireframe_top_jump label" @@ -4757,12 +4749,12 @@ msgstr "再一次经过顶部表面，但不挤出材料。 这是为了进一 #: fdmprinter.def.json msgctxt "ironing_only_highest_layer label" msgid "Iron Only Highest Layer" -msgstr "" +msgstr "仅熨平最高层" #: fdmprinter.def.json msgctxt "ironing_only_highest_layer description" msgid "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish." -msgstr "" +msgstr "仅在网格的最后一层执行熨平。 如果较低的层不需要平滑的表面效果，这将节省时间。" #: fdmprinter.def.json msgctxt "ironing_pattern label" @@ -5006,4 +4998,4 @@ msgstr "在将模型从文件中载入时应用在模型上的转换矩阵。" #~ msgctxt "machine_gcode_flavor option RepRap (Volumatric)" #~ msgid "RepRap (Volumetric)" -#~ msgstr "RepRap (Volumetric)" +#~ msgstr "RepRap (Volumetric)" \ No newline at end of file diff --git a/resources/qml/AboutDialog.qml b/resources/qml/AboutDialog.qml index 3a3ceb63d5..6784ec7633 100644 --- a/resources/qml/AboutDialog.qml +++ b/resources/qml/AboutDialog.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 @@ -115,10 +115,10 @@ UM.Dialog } Component.onCompleted: { - projectsModel.append({ name:"Cura", description: catalog.i18nc("@label", "Graphical user interface"), license: "AGPLv3", url: "https://github.com/Ultimaker/Cura" }); - projectsModel.append({ name:"Uranium", description: catalog.i18nc("@label", "Application framework"), license: "AGPLv3", url: "https://github.com/Ultimaker/Uranium" }); + projectsModel.append({ name:"Cura", description: catalog.i18nc("@label", "Graphical user interface"), license: "LGPLv3", url: "https://github.com/Ultimaker/Cura" }); + projectsModel.append({ name:"Uranium", description: catalog.i18nc("@label", "Application framework"), license: "LGPLv3", url: "https://github.com/Ultimaker/Uranium" }); projectsModel.append({ name:"CuraEngine", description: catalog.i18nc("@label", "GCode generator"), license: "AGPLv3", url: "https://github.com/Ultimaker/CuraEngine" }); - projectsModel.append({ name:"libArcus", description: catalog.i18nc("@label", "Interprocess communication library"), license: "AGPLv3", url: "https://github.com/Ultimaker/libArcus" }); + projectsModel.append({ name:"libArcus", description: catalog.i18nc("@label", "Interprocess communication library"), license: "LGPLv3", url: "https://github.com/Ultimaker/libArcus" }); projectsModel.append({ name:"Python", description: catalog.i18nc("@label", "Programming language"), license: "Python", url: "http://python.org/" }); projectsModel.append({ name:"Qt5", description: catalog.i18nc("@label", "GUI framework"), license: "LGPLv3", url: "https://www.qt.io/" }); @@ -128,7 +128,7 @@ UM.Dialog projectsModel.append({ name:"SciPy", description: catalog.i18nc("@label", "Support library for scientific computing"), license: "BSD-new", url: "https://www.scipy.org/" }); projectsModel.append({ name:"NumPy", description: catalog.i18nc("@label", "Support library for faster math"), license: "BSD", url: "http://www.numpy.org/" }); projectsModel.append({ name:"NumPy-STL", description: catalog.i18nc("@label", "Support library for handling STL files"), license: "BSD", url: "https://github.com/WoLpH/numpy-stl" }); - projectsModel.append({ name:"libSavitar", description: catalog.i18nc("@label", "Support library for handling 3MF files"), license: "AGPLv3", url: "https://github.com/ultimaker/libsavitar" }); + projectsModel.append({ name:"libSavitar", description: catalog.i18nc("@label", "Support library for handling 3MF files"), license: "LGPLv3", url: "https://github.com/ultimaker/libsavitar" }); projectsModel.append({ name:"PySerial", description: catalog.i18nc("@label", "Serial communication library"), license: "Python", url: "http://pyserial.sourceforge.net/" }); projectsModel.append({ name:"python-zeroconf", description: catalog.i18nc("@label", "ZeroConf discovery library"), license: "LGPL", url: "https://github.com/jstasiak/python-zeroconf" }); projectsModel.append({ name:"Clipper", description: catalog.i18nc("@label", "Polygon clipping library"), license: "Boost", url: "http://www.angusj.com/delphi/clipper.php" }); diff --git a/resources/qml/Actions.qml b/resources/qml/Actions.qml index f028d22632..68a3baa768 100755 --- a/resources/qml/Actions.qml +++ b/resources/qml/Actions.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. pragma Singleton diff --git a/resources/qml/AddMachineDialog.qml b/resources/qml/AddMachineDialog.qml index de2631457e..2a3e279bcc 100644 --- a/resources/qml/AddMachineDialog.qml +++ b/resources/qml/AddMachineDialog.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/AskOpenAsProjectOrModelsDialog.qml b/resources/qml/AskOpenAsProjectOrModelsDialog.qml index 7fb1b939f7..450ec0ea26 100644 --- a/resources/qml/AskOpenAsProjectOrModelsDialog.qml +++ b/resources/qml/AskOpenAsProjectOrModelsDialog.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Cura.qml b/resources/qml/Cura.qml index 5877656acc..2399fb4395 100755 --- a/resources/qml/Cura.qml +++ b/resources/qml/Cura.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/DiscardOrKeepProfileChangesDialog.qml b/resources/qml/DiscardOrKeepProfileChangesDialog.qml index 24a22227c1..915a11fde2 100644 --- a/resources/qml/DiscardOrKeepProfileChangesDialog.qml +++ b/resources/qml/DiscardOrKeepProfileChangesDialog.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/EngineLog.qml b/resources/qml/EngineLog.qml index 634f6024cc..965587b59e 100644 --- a/resources/qml/EngineLog.qml +++ b/resources/qml/EngineLog.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/ExtruderButton.qml b/resources/qml/ExtruderButton.qml index 88de797daf..6ceadbb5b4 100644 --- a/resources/qml/ExtruderButton.qml +++ b/resources/qml/ExtruderButton.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/JobSpecs.qml b/resources/qml/JobSpecs.qml index 3e5513621b..9aab66b9be 100644 --- a/resources/qml/JobSpecs.qml +++ b/resources/qml/JobSpecs.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Menus/ContextMenu.qml b/resources/qml/Menus/ContextMenu.qml index 86e146cb17..39d497722f 100755 --- a/resources/qml/Menus/ContextMenu.qml +++ b/resources/qml/Menus/ContextMenu.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Menus/MaterialMenu.qml b/resources/qml/Menus/MaterialMenu.qml index e167e65855..00def7d063 100644 --- a/resources/qml/Menus/MaterialMenu.qml +++ b/resources/qml/Menus/MaterialMenu.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Menus/NozzleMenu.qml b/resources/qml/Menus/NozzleMenu.qml index ee7ddacf98..b51b3b1907 100644 --- a/resources/qml/Menus/NozzleMenu.qml +++ b/resources/qml/Menus/NozzleMenu.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Menus/PrinterMenu.qml b/resources/qml/Menus/PrinterMenu.qml index 408e8bd585..073723a60d 100644 --- a/resources/qml/Menus/PrinterMenu.qml +++ b/resources/qml/Menus/PrinterMenu.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Menus/ProfileMenu.qml b/resources/qml/Menus/ProfileMenu.qml index 0ed4448d1b..17eb7cfb1d 100644 --- a/resources/qml/Menus/ProfileMenu.qml +++ b/resources/qml/Menus/ProfileMenu.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Menus/RecentFilesMenu.qml b/resources/qml/Menus/RecentFilesMenu.qml index e00a32768d..579eb24344 100644 --- a/resources/qml/Menus/RecentFilesMenu.qml +++ b/resources/qml/Menus/RecentFilesMenu.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Menus/ViewMenu.qml b/resources/qml/Menus/ViewMenu.qml index cf3108fdac..bb5999edb9 100644 --- a/resources/qml/Menus/ViewMenu.qml +++ b/resources/qml/Menus/ViewMenu.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/MonitorButton.qml b/resources/qml/MonitorButton.qml index 45c28847cd..29b00f50e6 100644 --- a/resources/qml/MonitorButton.qml +++ b/resources/qml/MonitorButton.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/OpenFilesIncludingProjectsDialog.qml b/resources/qml/OpenFilesIncludingProjectsDialog.qml index ade9d0e820..af8fb9e05f 100644 --- a/resources/qml/OpenFilesIncludingProjectsDialog.qml +++ b/resources/qml/OpenFilesIncludingProjectsDialog.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Preferences/GeneralPage.qml b/resources/qml/Preferences/GeneralPage.qml index 6f9e84bfc3..ad6c2ce050 100755 --- a/resources/qml/Preferences/GeneralPage.qml +++ b/resources/qml/Preferences/GeneralPage.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Preferences/MachinesPage.qml b/resources/qml/Preferences/MachinesPage.qml index 429400f170..dc978c0f7a 100644 --- a/resources/qml/Preferences/MachinesPage.qml +++ b/resources/qml/Preferences/MachinesPage.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Preferences/MaterialView.qml b/resources/qml/Preferences/MaterialView.qml index 776c4c303e..c1750b2342 100644 --- a/resources/qml/Preferences/MaterialView.qml +++ b/resources/qml/Preferences/MaterialView.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.3 diff --git a/resources/qml/Preferences/MaterialsPage.qml b/resources/qml/Preferences/MaterialsPage.qml index 13b33b1ea1..5c9e1e7b55 100644 --- a/resources/qml/Preferences/MaterialsPage.qml +++ b/resources/qml/Preferences/MaterialsPage.qml @@ -1,5 +1,5 @@ //Copyright (c) 2017 Ultimaker B.V. -//Cura is released under the terms of the AGPLv3 or higher. +//Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Preferences/ProfileTab.qml b/resources/qml/Preferences/ProfileTab.qml index 8c56892c1d..acebea3500 100644 --- a/resources/qml/Preferences/ProfileTab.qml +++ b/resources/qml/Preferences/ProfileTab.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Preferences/ProfilesPage.qml b/resources/qml/Preferences/ProfilesPage.qml index 521145f872..c7b6b3e933 100644 --- a/resources/qml/Preferences/ProfilesPage.qml +++ b/resources/qml/Preferences/ProfilesPage.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Preferences/ReadOnlySpinBox.qml b/resources/qml/Preferences/ReadOnlySpinBox.qml index 90314ac323..5d0666d306 100644 --- a/resources/qml/Preferences/ReadOnlySpinBox.qml +++ b/resources/qml/Preferences/ReadOnlySpinBox.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Preferences/ReadOnlyTextArea.qml b/resources/qml/Preferences/ReadOnlyTextArea.qml index db92c7d2b0..2c553ac2ca 100644 --- a/resources/qml/Preferences/ReadOnlyTextArea.qml +++ b/resources/qml/Preferences/ReadOnlyTextArea.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Preferences/ReadOnlyTextField.qml b/resources/qml/Preferences/ReadOnlyTextField.qml index a34c39cde3..9407475a9b 100644 --- a/resources/qml/Preferences/ReadOnlyTextField.qml +++ b/resources/qml/Preferences/ReadOnlyTextField.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. // Different than the name suggests, it is not always read-only. import QtQuick 2.1 diff --git a/resources/qml/Preferences/SettingVisibilityPage.qml b/resources/qml/Preferences/SettingVisibilityPage.qml index 4302fb42a8..5198ab1030 100644 --- a/resources/qml/Preferences/SettingVisibilityPage.qml +++ b/resources/qml/Preferences/SettingVisibilityPage.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/PrintMonitor.qml b/resources/qml/PrintMonitor.qml index 931a8ae23f..a0e157bacf 100644 --- a/resources/qml/PrintMonitor.qml +++ b/resources/qml/PrintMonitor.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 @@ -164,6 +164,7 @@ Column id: materialColor width: materialName.height * 0.75 height: materialName.height * 0.75 + radius: width / 2 color: (connectedPrinter != null && connectedPrinter.materialColors[index] != null && connectedPrinter.materialIds[index] != "") ? connectedPrinter.materialColors[index] : "#00000000" border.width: UM.Theme.getSize("default_lining").width border.color: UM.Theme.getColor("lining") diff --git a/resources/qml/SaveButton.qml b/resources/qml/SaveButton.qml index 0a792c8bba..b613b1217e 100644 --- a/resources/qml/SaveButton.qml +++ b/resources/qml/SaveButton.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Settings/SettingCategory.qml b/resources/qml/Settings/SettingCategory.qml index e8c0983398..53f8f89e15 100644 --- a/resources/qml/Settings/SettingCategory.qml +++ b/resources/qml/Settings/SettingCategory.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Settings/SettingCheckBox.qml b/resources/qml/Settings/SettingCheckBox.qml index 9919c6aad9..9029249249 100644 --- a/resources/qml/Settings/SettingCheckBox.qml +++ b/resources/qml/Settings/SettingCheckBox.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Layouts 1.1 diff --git a/resources/qml/Settings/SettingComboBox.qml b/resources/qml/Settings/SettingComboBox.qml index 2ff0eba2df..f2ec5fda65 100644 --- a/resources/qml/Settings/SettingComboBox.qml +++ b/resources/qml/Settings/SettingComboBox.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Settings/SettingExtruder.qml b/resources/qml/Settings/SettingExtruder.qml index 1c94ac938d..ca99640f6d 100644 --- a/resources/qml/Settings/SettingExtruder.qml +++ b/resources/qml/Settings/SettingExtruder.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Settings/SettingItem.qml b/resources/qml/Settings/SettingItem.qml index e520e69040..2bf2c17273 100644 --- a/resources/qml/Settings/SettingItem.qml +++ b/resources/qml/Settings/SettingItem.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Layouts 1.1 diff --git a/resources/qml/Settings/SettingOptionalExtruder.qml b/resources/qml/Settings/SettingOptionalExtruder.qml index 9d8ee72dd7..1c286fcd2d 100644 --- a/resources/qml/Settings/SettingOptionalExtruder.qml +++ b/resources/qml/Settings/SettingOptionalExtruder.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Settings/SettingTextField.qml b/resources/qml/Settings/SettingTextField.qml index 752e846f1a..ffc169af1a 100644 --- a/resources/qml/Settings/SettingTextField.qml +++ b/resources/qml/Settings/SettingTextField.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.2 diff --git a/resources/qml/Settings/SettingUnknown.qml b/resources/qml/Settings/SettingUnknown.qml index 55e26b6695..f4dadf8d75 100644 --- a/resources/qml/Settings/SettingUnknown.qml +++ b/resources/qml/Settings/SettingUnknown.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/qml/Settings/SettingView.qml b/resources/qml/Settings/SettingView.qml index 8dd8670f05..dd684d852a 100644 --- a/resources/qml/Settings/SettingView.qml +++ b/resources/qml/Settings/SettingView.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Uranium is released under the terms of the AGPLv3 or higher. +// Uranium is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Sidebar.qml b/resources/qml/Sidebar.qml index cdfe5e7a81..ca62d5dd47 100755 --- a/resources/qml/Sidebar.qml +++ b/resources/qml/Sidebar.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/SidebarAdvanced.qml b/resources/qml/SidebarAdvanced.qml index 0a3f25528f..95f218639b 100644 --- a/resources/qml/SidebarAdvanced.qml +++ b/resources/qml/SidebarAdvanced.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.0 diff --git a/resources/qml/SidebarContents.qml b/resources/qml/SidebarContents.qml index c53818a9ce..eae718023b 100644 --- a/resources/qml/SidebarContents.qml +++ b/resources/qml/SidebarContents.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/SidebarHeader.qml b/resources/qml/SidebarHeader.qml index a17c896ad6..9bc18b32d9 100644 --- a/resources/qml/SidebarHeader.qml +++ b/resources/qml/SidebarHeader.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/SidebarSimple.qml b/resources/qml/SidebarSimple.qml index c2664c37a3..eba4ad48cd 100644 --- a/resources/qml/SidebarSimple.qml +++ b/resources/qml/SidebarSimple.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 @@ -186,7 +186,10 @@ Item x: { // Make sure the text aligns correctly with each tick - if (index == 0) { + if (qualityModel.totalTicks == 0) { + // If there is only one tick, align it centrally + return ((base.width * 0.55) - width) / 2 + } else if (index == 0) { return (base.width * 0.55 / qualityModel.totalTicks) * index } else if (index == qualityModel.totalTicks) { return (base.width * 0.55 / qualityModel.totalTicks) * index - width @@ -223,7 +226,7 @@ Item Repeater { id: qualityRepeater - model: qualityModel + model: qualityModel.totalTicks > 0 ? qualityModel : 0 Rectangle { @@ -236,6 +239,15 @@ Item } } + Rectangle { + id: disabledHandleButton + visible: !qualitySlider.visible + anchors.centerIn: parent + color: UM.Theme.getColor("quality_slider_unavailable") + implicitWidth: 10 * screenScaleFactor + implicitHeight: implicitWidth + radius: width / 2 + } Slider { @@ -243,6 +255,7 @@ Item height: UM.Theme.getSize("sidebar_margin").height anchors.bottom: speedSlider.bottom enabled: qualityModel.availableTotalTicks > 0 + visible: qualityModel.totalTicks > 0 updateValueWhileDragging : false minimumValue: qualityModel.qualitySliderAvailableMin >= 0 ? qualityModel.qualitySliderAvailableMin : 0 @@ -262,16 +275,16 @@ Item groove: Rectangle { implicitHeight: 2 * screenScaleFactor color: UM.Theme.getColor("quality_slider_available") - radius: 1 * screenScaleFactor + radius: height / 2 } handle: Item { Rectangle { id: qualityhandleButton anchors.centerIn: parent - color: control.enabled ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") + color: UM.Theme.getColor("quality_slider_available") implicitWidth: 10 * screenScaleFactor - implicitHeight: 10 * screenScaleFactor - radius: 10 * screenScaleFactor + implicitHeight: implicitWidth + radius: implicitWidth / 2 } } } @@ -309,7 +322,7 @@ Item text: catalog.i18nc("@label", "Slower") font: UM.Theme.getFont("default") - color: UM.Theme.getColor("text") + color: (qualityModel.availableTotalTicks > 0) ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") horizontalAlignment: Text.AlignLeft } @@ -320,7 +333,7 @@ Item text: catalog.i18nc("@label", "Faster") font: UM.Theme.getFont("default") - color: UM.Theme.getColor("text") + color: (qualityModel.availableTotalTicks > 0) ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") horizontalAlignment: Text.AlignRight } } @@ -354,13 +367,11 @@ Item } } - - Item { id: infillCellRight - height: infillSlider.height + enableGradualInfillCheckBox.height + (UM.Theme.getSize("sidebar_margin").height * 2) + height: infillSlider.height + UM.Theme.getSize("sidebar_margin").height + enableGradualInfillCheckBox.visible * (enableGradualInfillCheckBox.height + UM.Theme.getSize("sidebar_margin").height) width: UM.Theme.getSize("sidebar").width * .55 anchors.left: infillCellLeft.right @@ -395,7 +406,7 @@ Item minimumValue: 0 maximumValue: 100 - stepSize: 10 + stepSize: (parseInt(infillDensity.properties.value) % 10 == 0) ? 10 : 1 tickmarksEnabled: true // disable slider when gradual support is enabled @@ -405,12 +416,12 @@ Item value: parseInt(infillDensity.properties.value) onValueChanged: { - infillDensity.setPropertyValue("value", infillSlider.value) + // Explicitly cast to string to make sure the value passed to Python is an integer. + infillDensity.setPropertyValue("value", String(parseInt(infillSlider.value))) } style: SliderStyle { - groove: Rectangle { id: groove implicitWidth: 200 * screenScaleFactor @@ -433,6 +444,15 @@ Item tickmarks: Repeater { id: repeater model: control.maximumValue / control.stepSize + 1 + + // check if a tick should be shown based on it's index and wether the infill density is a multiple of 10 (slider step size) + function shouldShowTick (index) { + if ((parseInt(infillDensity.properties.value) % 10 == 0) || (index % 10 == 0)) { + return true + } + return false + } + Rectangle { anchors.verticalCenter: parent.verticalCenter color: control.enabled ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") @@ -440,6 +460,7 @@ Item height: 6 * screenScaleFactor y: 0 x: styleData.handleWidth / 2 + index * ((repeater.width - styleData.handleWidth) / (repeater.count-1)) + visible: shouldShowTick(index) } } } @@ -485,7 +506,7 @@ Item visible: infillIconList.activeIndex == index border.width: UM.Theme.getSize("default_lining").width - border.color: UM.Theme.getColor("quality_slider_available") + border.color: UM.Theme.getColor("quality_slider_unavailable") UM.RecolorImage { anchors.fill: parent @@ -505,11 +526,12 @@ Item property alias _hovered: enableGradualInfillMouseArea.containsMouse anchors.top: infillSlider.bottom - anchors.topMargin: UM.Theme.getSize("sidebar_margin").height + anchors.topMargin: UM.Theme.getSize("sidebar_margin").height / 2 // closer to slider since it belongs to the same category anchors.left: infillCellRight.left style: UM.Theme.styles.checkbox enabled: base.settingsEnabled + visible: infillSteps.properties.enabled == "True" checked: parseInt(infillSteps.properties.value) > 0 MouseArea { @@ -598,7 +620,7 @@ Item visible: enableSupportCheckBox.visible anchors.top: infillCellRight.bottom - anchors.topMargin: UM.Theme.getSize("sidebar_margin").height + anchors.topMargin: UM.Theme.getSize("sidebar_margin").height * 1.5 anchors.left: parent.left anchors.leftMargin: UM.Theme.getSize("sidebar_margin").width anchors.verticalCenter: enableSupportCheckBox.verticalCenter @@ -613,8 +635,7 @@ Item id: enableSupportCheckBox property alias _hovered: enableSupportMouseArea.containsMouse - anchors.top: infillCellRight.bottom - anchors.topMargin: UM.Theme.getSize("sidebar_margin").height + anchors.top: enableSupportLabel.top anchors.left: infillCellRight.left style: UM.Theme.styles.checkbox; @@ -726,15 +747,19 @@ Item { id: adhesionHelperLabel visible: adhesionCheckBox.visible - anchors.left: parent.left - anchors.leftMargin: UM.Theme.getSize("sidebar_margin").width - anchors.right: infillCellLeft.right - anchors.rightMargin: UM.Theme.getSize("sidebar_margin").width - anchors.verticalCenter: adhesionCheckBox.verticalCenter - text: catalog.i18nc("@label", "Build Plate Adhesion"); - font: UM.Theme.getFont("default"); - color: UM.Theme.getColor("text"); + + text: catalog.i18nc("@label", "Build Plate Adhesion") + font: UM.Theme.getFont("default") + color: UM.Theme.getColor("text") elide: Text.ElideRight + + anchors { + left: parent.left + leftMargin: UM.Theme.getSize("sidebar_margin").width + right: infillCellLeft.right + rightMargin: UM.Theme.getSize("sidebar_margin").width + verticalCenter: adhesionCheckBox.verticalCenter + } } CheckBox @@ -829,7 +854,6 @@ Item UM.SettingPropertyProvider { id: infillExtruderNumber - containerStackId: Cura.MachineManager.activeStackId key: "infill_extruder_nr" watchedProperties: [ "value" ] @@ -850,7 +874,7 @@ Item id: infillSteps containerStackId: Cura.MachineManager.activeStackId key: "gradual_infill_steps" - watchedProperties: ["value"] + watchedProperties: ["value", "enabled"] storeIndex: 0 } diff --git a/resources/qml/SidebarTooltip.qml b/resources/qml/SidebarTooltip.qml index 08ba0a081e..057bd63203 100644 --- a/resources/qml/SidebarTooltip.qml +++ b/resources/qml/SidebarTooltip.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Toolbar.qml b/resources/qml/Toolbar.qml index 2ab24f2023..f32a5edc6f 100644 --- a/resources/qml/Toolbar.qml +++ b/resources/qml/Toolbar.qml @@ -1,5 +1,5 @@ // Copyright (c) 2015 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/Topbar.qml b/resources/qml/Topbar.qml index 23fd77511e..152a677467 100644 --- a/resources/qml/Topbar.qml +++ b/resources/qml/Topbar.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.2 import QtQuick.Controls 1.1 diff --git a/resources/qml/WorkspaceSummaryDialog.qml b/resources/qml/WorkspaceSummaryDialog.qml index 654bbaa3e8..d5cc416f39 100644 --- a/resources/qml/WorkspaceSummaryDialog.qml +++ b/resources/qml/WorkspaceSummaryDialog.qml @@ -1,5 +1,5 @@ // Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/resources/themes/cura-light/styles.qml b/resources/themes/cura-light/styles.qml index f2c387c6b7..6d991c5541 100755 --- a/resources/themes/cura-light/styles.qml +++ b/resources/themes/cura-light/styles.qml @@ -1,5 +1,5 @@ // Copyright (c) 2017 Ultimaker B.V. -// Cura is released under the terms of the AGPLv3 or higher. +// Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.1 import QtQuick.Controls 1.1 diff --git a/setup.py b/setup.py index 1eeca36ed6..f68d5683d9 100644 --- a/setup.py +++ b/setup.py @@ -1,5 +1,5 @@ # Copyright (c) 2015 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. from distutils.core import setup import py2exe diff --git a/tests/Settings/TestCuraContainerRegistry.py b/tests/Settings/TestCuraContainerRegistry.py index 11e772c3b7..a6d33afc6d 100644 --- a/tests/Settings/TestCuraContainerRegistry.py +++ b/tests/Settings/TestCuraContainerRegistry.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import os #To find the directory with test files and find the test files. import pytest #This module contains unit tests. diff --git a/tests/Settings/TestExtruderStack.py b/tests/Settings/TestExtruderStack.py index 4cafde5127..66b4d51b04 100644 --- a/tests/Settings/TestExtruderStack.py +++ b/tests/Settings/TestExtruderStack.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import pytest #This module contains automated tests. import unittest.mock #For the mocking and monkeypatching functionality. diff --git a/tests/Settings/TestGlobalStack.py b/tests/Settings/TestGlobalStack.py index c6491d574c..89dd76aec1 100755 --- a/tests/Settings/TestGlobalStack.py +++ b/tests/Settings/TestGlobalStack.py @@ -1,5 +1,5 @@ # Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the AGPLv3 or higher. +# Cura is released under the terms of the LGPLv3 or higher. import pytest #This module contains unit tests. import unittest.mock #To monkeypatch some mocks in place of dependencies.