3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-12-05 16:51:12 -07:00
Code Issues Projects Releases Packages Wiki Activity Actions 2

improve initial layer settings

Browse source 
ultimaker.def.json is also cleaned and put in alphabetic order.
Ultimaker 2 and original are kept mostly as they were, since they are not tested. PP-42
This commit is contained in:
Rijk van Manen 2022-10-06 16:11:04 +02:00
parent 3bb448c483
commit 27d56d378e
407 changed files with 117 additions and 968 deletions
Download patch file Download diff file Expand all files Collapse all files

1
resources/quality/ultimaker_s3/um_s3_aa0.25_Nylon_Normal_Quality.inst.cfg
View file

@ -20,7 +20,6 @@ ooze_shield_angle = 40
raft_airgap = 0.4
retraction_min_travel = 5
skin_overlap = 50
speed_layer_0 = 10
speed_print = 70
speed_topbottom = =math.ceil(speed_print * 30 / 70)
speed_wall = =math.ceil(speed_print * 30 / 70)

2
resources/quality/ultimaker_s3/um_s3_aa0.25_PC_Normal_Quality.inst.cfg
View file

@ -14,7 +14,6 @@ is_experimental = True
[values]
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed_max = 50
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 5
@ -30,7 +29,6 @@ retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
skin_overlap = 30
speed_layer_0 = =math.ceil(speed_print * 25 / 50)
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 25 / 50)
speed_wall = =math.ceil(speed_print * 40 / 50)

1
resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg
View file

@ -12,7 +12,6 @@ material = generic_petg
variant = AA 0.25
[values]
initial_layer_line_width_factor = 100
material_print_temperature = =default_material_print_temperature - 5
retraction_combing_max_distance = 8
speed_infill = =math.ceil(speed_print * 40 / 55)

3
resources/quality/ultimaker_s3/um_s3_aa0.25_PLA_Normal_Quality.inst.cfg
View file

@ -13,7 +13,6 @@ variant = AA 0.25
[values]
brim_width = 8
cool_fan_full_at_height = =layer_height_0
cool_min_speed = 10
infill_overlap = =0 if infill_sparse_density > 80 else 10
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
@ -24,9 +23,7 @@ material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature = 190
retraction_hop = 0.2
skin_overlap = 5
speed_layer_0 = =speed_print
speed_print = 30
speed_travel_layer_0 = 120
speed_wall = =math.ceil(speed_print * 25 / 30)
speed_wall_0 = =math.ceil(speed_print * 20 / 30)
top_bottom_thickness = 0.72

3
resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
View file

@ -24,7 +24,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature - 15
material_print_temperature_layer_0 = =material_print_temperature + 3
multiple_mesh_overlap = 0
prime_tower_enable = False
prime_tower_size = 16
@ -35,9 +34,7 @@ retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
retraction_prime_speed = 15
speed_layer_0 = =math.ceil(speed_print * 15 / 25)
speed_print = 25
speed_travel_layer_0 = 50
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
support_angle = 50

3
resources/quality/ultimaker_s3/um_s3_aa0.25_TPLA_Normal_Quality.inst.cfg
View file

@ -13,7 +13,6 @@ variant = AA 0.25
[values]
brim_width = 8
cool_fan_full_at_height = =layer_height_0
cool_min_speed = 7
infill_overlap = =0 if infill_sparse_density > 80 else 10
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
@ -23,10 +22,8 @@ material_final_print_temperature = =material_print_temperature - 15
material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature - 15
skin_overlap = 5
speed_layer_0 = =math.ceil(speed_print * 30 / 30)
speed_print = 30
speed_topbottom = =math.ceil(speed_print * 20 / 30)
speed_travel_layer_0 = 120
speed_wall = =math.ceil(speed_print * 25 / 30)
speed_wall_0 = =math.ceil(speed_print * 20 / 30)
top_bottom_thickness = 0.72

1
resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Draft_Print.inst.cfg
View file

@ -21,7 +21,6 @@ prime_tower_enable = False
raft_airgap = 0.15
skin_overlap = 20
speed_infill = =math.ceil(speed_print * 50 / 60)
speed_layer_0 = 10
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 35 / 60)
speed_wall = =math.ceil(speed_print * 45 / 60)

1
resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Fast_Print.inst.cfg
View file

@ -21,7 +21,6 @@ material_print_temperature = =default_material_print_temperature + 15
prime_tower_enable = False
raft_airgap = 0.15
speed_infill = =math.ceil(speed_print * 45 / 60)
speed_layer_0 = 10
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 30 / 60)
speed_wall = =math.ceil(speed_print * 40 / 60)

1
resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_High_Quality.inst.cfg
View file

@ -21,7 +21,6 @@ material_print_temperature = =default_material_print_temperature + 5
prime_tower_enable = False
raft_airgap = 0.15
speed_infill = =math.ceil(speed_print * 40 / 50)
speed_layer_0 = 10
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 30 / 50)
speed_wall = =math.ceil(speed_print * 30 / 50)

1
resources/quality/ultimaker_s3/um_s3_aa0.4_ABS_Normal_Quality.inst.cfg
View file

@ -20,7 +20,6 @@ material_print_temperature = =default_material_print_temperature + 10
prime_tower_enable = False
raft_airgap = 0.15
speed_infill = =math.ceil(speed_print * 40 / 55)
speed_layer_0 = 10
speed_print = 55
speed_topbottom = =math.ceil(speed_print * 30 / 55)
speed_wall = =math.ceil(speed_print * 30 / 55)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg
View file

@ -13,14 +13,12 @@ variant = AA 0.4
[values]
brim_replaces_support = False
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature + 5
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
skin_overlap = 20
speed_layer_0 = =math.ceil(speed_print * 20 / 70)
speed_topbottom = =math.ceil(speed_print * 35 / 70)
speed_wall = =math.ceil(speed_print * 50 / 70)
speed_wall_0 = =math.ceil(speed_wall * 35 / 50)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Fast_Print.inst.cfg
View file

@ -13,12 +13,10 @@ variant = AA 0.4
[values]
brim_replaces_support = False
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
speed_layer_0 = =math.ceil(speed_print * 20 / 80)
speed_print = 80
speed_topbottom = =math.ceil(speed_print * 30 / 80)
speed_wall = =math.ceil(speed_print * 40 / 80)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Normal_Quality.inst.cfg
View file

@ -13,14 +13,12 @@ variant = AA 0.4
[values]
brim_replaces_support = False
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
cool_min_speed = 7
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
skin_overlap = 10
speed_layer_0 = =math.ceil(speed_print * 20 / 70)
support_angle = 45
support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
support_brim_enable = True

2
resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_VeryDraft_Print.inst.cfg
View file

@ -14,14 +14,12 @@ is_experimental = True
[values]
brim_replaces_support = False
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature + 5
prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
skin_overlap = 20
speed_layer_0 = =math.ceil(speed_print * 20 / 70)
speed_topbottom = =math.ceil(speed_print * 35 / 70)
speed_wall = =math.ceil(speed_print * 50 / 70)
speed_wall_0 = =math.ceil(speed_wall * 35 / 50)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Draft_Print.inst.cfg
View file

@ -20,7 +20,6 @@ machine_min_cool_heat_time_window = 15
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 10
material_print_temperature_layer_0 = =material_print_temperature
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_wipe_enabled = True
@ -30,7 +29,6 @@ retraction_hop_enabled = False
retraction_hop_only_when_collides = True
retraction_prime_speed = =retraction_speed
skin_overlap = 20
speed_layer_0 = =math.ceil(speed_print * 20 / 50)
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 40 / 50)
speed_wall = =math.ceil(speed_print * 50 / 50)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Fast_Print.inst.cfg
View file

@ -20,7 +20,6 @@ machine_min_cool_heat_time_window = 15
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 10
material_print_temperature_layer_0 = =material_print_temperature
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_wipe_enabled = True
@ -30,7 +29,6 @@ retraction_hop_enabled = False
retraction_hop_only_when_collides = True
retraction_prime_speed = =retraction_speed
skin_overlap = 20
speed_layer_0 = =math.ceil(speed_print * 20 / 45)
speed_print = 45
speed_topbottom = =math.ceil(speed_print * 35 / 45)
speed_wall = =math.ceil(speed_print * 45 / 45)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_High_Quality.inst.cfg
View file

@ -22,7 +22,6 @@ machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =material_print_temperature
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_wipe_enabled = True
@ -32,7 +31,6 @@ retraction_hop_enabled = False
retraction_hop_only_when_collides = True
retraction_prime_speed = =retraction_speed
skin_overlap = 20
speed_layer_0 = =math.ceil(speed_print * 20 / 40)
speed_print = 40
speed_topbottom = =math.ceil(speed_print * 30 / 35)
speed_wall = =math.ceil(speed_print * 35 / 40)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_CPEP_Normal_Quality.inst.cfg
View file

@ -22,7 +22,6 @@ machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature + 5
material_print_temperature_layer_0 = =material_print_temperature
multiple_mesh_overlap = 0
prime_tower_enable = True
prime_tower_wipe_enabled = True
@ -32,7 +31,6 @@ retraction_hop_enabled = False
retraction_hop_only_when_collides = True
retraction_prime_speed = =retraction_speed
skin_overlap = 20
speed_layer_0 = =math.ceil(speed_print * 20 / 40)
speed_print = 40
speed_topbottom = =math.ceil(speed_print * 30 / 35)
speed_wall = =math.ceil(speed_print * 35 / 40)

1
resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Draft_Print.inst.cfg
View file

@ -20,7 +20,6 @@ retraction_combing_max_distance = 50
retraction_prime_speed = =retraction_speed
skin_overlap = 20
speed_infill = =math.ceil(speed_print * 50 / 60)
speed_layer_0 = =math.ceil(speed_print * 20 / 60)
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 35 / 60)
speed_wall = =math.ceil(speed_print * 45 / 60)

1
resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Fast_Print.inst.cfg
View file

@ -20,7 +20,6 @@ material_print_temperature = =default_material_print_temperature + 5
retraction_combing_max_distance = 50
retraction_prime_speed = =retraction_speed
speed_infill = =math.ceil(speed_print * 50 / 60)
speed_layer_0 = =math.ceil(speed_print * 20 / 60)
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 30 / 60)
speed_wall = =math.ceil(speed_print * 40 / 60)

1
resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_High_Quality.inst.cfg
View file

@ -22,7 +22,6 @@ material_print_temperature = =default_material_print_temperature - 5
retraction_combing_max_distance = 50
retraction_prime_speed = =retraction_speed
speed_infill = =math.ceil(speed_print * 40 / 50)
speed_layer_0 = =math.ceil(speed_print * 20 / 50)
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 30 / 50)
speed_wall = =math.ceil(speed_print * 30 / 50)

1
resources/quality/ultimaker_s3/um_s3_aa0.4_CPE_Normal_Quality.inst.cfg
View file

@ -20,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 5
retraction_combing_max_distance = 50
retraction_prime_speed = =retraction_speed
speed_infill = =math.ceil(speed_print * 45 / 55)
speed_layer_0 = =math.ceil(speed_print * 20 / 55)
speed_print = 55
speed_topbottom = =math.ceil(speed_print * 30 / 55)
speed_wall = =math.ceil(speed_print * 30 / 55)

1
resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Draft_Print.inst.cfg
View file

@ -21,7 +21,6 @@ ooze_shield_angle = 40
raft_airgap = 0.4
retraction_prime_speed = =retraction_speed
skin_overlap = 50
speed_layer_0 = 10
switch_extruder_prime_speed = 30
switch_extruder_retraction_amount = 30
switch_extruder_retraction_speeds = 40

1
resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Fast_Print.inst.cfg
View file

@ -21,7 +21,6 @@ ooze_shield_angle = 40
raft_airgap = 0.4
retraction_prime_speed = =retraction_speed
skin_overlap = 50
speed_layer_0 = 10
switch_extruder_prime_speed = 30
switch_extruder_retraction_amount = 30
switch_extruder_retraction_speeds = 40

1
resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_High_Quality.inst.cfg
View file

@ -20,7 +20,6 @@ ooze_shield_angle = 40
raft_airgap = 0.4
retraction_prime_speed = =retraction_speed
skin_overlap = 50
speed_layer_0 = 10
switch_extruder_prime_speed = 30
switch_extruder_retraction_amount = 30
switch_extruder_retraction_speeds = 40

1
resources/quality/ultimaker_s3/um_s3_aa0.4_Nylon_Normal_Quality.inst.cfg
View file

@ -20,7 +20,6 @@ ooze_shield_angle = 40
raft_airgap = 0.4
retraction_prime_speed = =retraction_speed
skin_overlap = 50
speed_layer_0 = 10
switch_extruder_prime_speed = 30
switch_extruder_retraction_amount = 30
switch_extruder_retraction_speeds = 40

2
resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Draft_Print.inst.cfg
View file

@ -13,7 +13,6 @@ variant = AA 0.4
[values]
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed_max = 90
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 6
@ -36,7 +35,6 @@ retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
skin_overlap = 30
speed_layer_0 = =math.ceil(speed_print * 25 / 50)
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 25 / 50)
speed_wall = =math.ceil(speed_print * 40 / 50)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Fast_Print.inst.cfg
View file

@ -13,7 +13,6 @@ variant = AA 0.4
[values]
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed_max = 85
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 7
@ -35,7 +34,6 @@ retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
skin_overlap = 30
speed_layer_0 = =math.ceil(speed_print * 25 / 50)
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 25 / 50)
speed_wall = =math.ceil(speed_print * 40 / 50)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_PC_High_Quality.inst.cfg
View file

@ -13,7 +13,6 @@ variant = AA 0.4
[values]
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed_max = 50
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 8
@ -36,7 +35,6 @@ retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
skin_overlap = 30
speed_layer_0 = =math.ceil(speed_print * 25 / 50)
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 25 / 50)
speed_wall = =math.ceil(speed_print * 40 / 50)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_PC_Normal_Quality.inst.cfg
View file

@ -13,7 +13,6 @@ variant = AA 0.4
[values]
brim_width = 20
cool_fan_full_at_height = =layer_height_0 + layer_height
cool_fan_speed_max = 50
cool_min_layer_time_fan_speed_max = 5
cool_min_speed = 5
@ -34,7 +33,6 @@ retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
skin_overlap = 30
speed_layer_0 = =math.ceil(speed_print * 25 / 50)
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 25 / 50)
speed_wall = =math.ceil(speed_print * 40 / 50)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg
View file

@ -13,14 +13,12 @@ variant = AA 0.4
[values]
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
initial_layer_line_width_factor = 100
material_final_print_temperature = =material_print_temperature - 5
material_initial_print_temperature = =material_print_temperature
material_print_temperature = =default_material_print_temperature + 5
retraction_combing_max_distance = 8
skin_overlap = 20
speed_infill = =math.ceil(speed_print * 50 / 60)
speed_layer_0 = =math.ceil(speed_print * 20 / 60)
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 35 / 60)
speed_wall = =math.ceil(speed_print * 45 / 60)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg
View file

@ -14,13 +14,11 @@ variant = AA 0.4
[values]
cool_min_speed = 7
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
initial_layer_line_width_factor = 100
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature
retraction_combing_max_distance = 8
speed_infill = =math.ceil(speed_print * 50 / 60)
speed_layer_0 = =math.ceil(speed_print * 20 / 60)
speed_print = 60
speed_topbottom = =math.ceil(speed_print * 30 / 60)
speed_wall = =math.ceil(speed_print * 40 / 60)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg
View file

@ -14,7 +14,6 @@ variant = AA 0.4
[values]
cool_min_speed = 12
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
initial_layer_line_width_factor = 100
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 15
@ -22,7 +21,6 @@ material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature - 10
retraction_combing_max_distance = 8
speed_infill = =math.ceil(speed_print * 40 / 50)
speed_layer_0 = =math.ceil(speed_print * 20 / 50)
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 30 / 50)
speed_wall = =math.ceil(speed_print * 30 / 50)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg
View file

@ -13,7 +13,6 @@ variant = AA 0.4
[values]
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
initial_layer_line_width_factor = 100
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_final_print_temperature = =material_print_temperature - 15
@ -21,7 +20,6 @@ material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature - 5
retraction_combing_max_distance = 8
speed_infill = =math.ceil(speed_print * 45 / 55)
speed_layer_0 = =math.ceil(speed_print * 20 / 55)
speed_print = 55
speed_topbottom = =math.ceil(speed_print * 30 / 55)
speed_wall = =math.ceil(speed_print * 30 / 55)

3
resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Draft_Print.inst.cfg
View file

@ -14,10 +14,8 @@ variant = AA 0.4
[values]
acceleration_wall = 2000
acceleration_wall_0 = 2000
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
infill_sparse_density = 15
layer_height_0 = 0.2
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature + 5
@ -25,7 +23,6 @@ prime_tower_enable = False
raft_airgap = 0.25
retraction_prime_speed = =retraction_speed
skin_overlap = 20
speed_layer_0 = 10
speed_topbottom = =math.ceil(speed_print * 40 / 70)
speed_wall = =math.ceil(speed_print * 55 / 70)
speed_wall_0 = =math.ceil(speed_wall * 45 / 50)

3
resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Fast_Print.inst.cfg
View file

@ -12,15 +12,12 @@ material = generic_pla
variant = AA 0.4
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
layer_height_0 = 0.2
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = False
raft_airgap = 0.25
retraction_prime_speed = =retraction_speed
speed_layer_0 = 10
speed_print = 70
speed_topbottom = =math.ceil(speed_print * 35 / 70)
speed_wall = =math.ceil(speed_print * 45 / 70)

3
resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_High_Quality.inst.cfg
View file

@ -12,10 +12,8 @@ material = generic_pla
variant = AA 0.4
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
cool_min_speed = 10
layer_height_0 = 0.2
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature - 5
@ -23,7 +21,6 @@ prime_tower_enable = False
raft_airgap = 0.25
retraction_prime_speed = =retraction_speed
skin_overlap = 10
speed_layer_0 = 10
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 35 / 50)
speed_wall = =math.ceil(speed_print * 35 / 50)

3
resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_Normal_Quality.inst.cfg
View file

@ -12,15 +12,12 @@ material = generic_pla
variant = AA 0.4
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
cool_min_speed = 7
layer_height_0 = 0.2
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
prime_tower_enable = False
raft_airgap = 0.25
retraction_prime_speed = =retraction_speed
skin_overlap = 10
speed_layer_0 = 10
top_bottom_thickness = 1

1
resources/quality/ultimaker_s3/um_s3_aa0.4_PLA_VeryDraft_Print.inst.cfg
View file

@ -17,7 +17,6 @@ acceleration_print = 2000
acceleration_topbottom = 1000
acceleration_wall = 1500
acceleration_wall_0 = 1000
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
infill_sparse_density = 15

3
resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
View file

@ -27,7 +27,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature - 5
material_print_temperature_layer_0 = =material_print_temperature + 5
multiple_mesh_overlap = 0
prime_tower_enable = False
prime_tower_size = 16
@ -37,10 +36,8 @@ retraction_extra_prime_amount = 0.8
retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
speed_layer_0 = =math.ceil(speed_print * 15 / 25)
speed_print = 25
speed_topbottom = =math.ceil(speed_print * 25 / 25)
speed_travel_layer_0 = 50
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
support_angle = 50

3
resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
View file

@ -27,7 +27,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_final_print_temperature = =material_print_temperature - 12
material_initial_print_temperature = =material_print_temperature - 2
material_print_temperature = =default_material_print_temperature - 13
material_print_temperature_layer_0 = =material_print_temperature + 3
multiple_mesh_overlap = 0
prime_tower_enable = False
prime_tower_size = 16
@ -37,10 +36,8 @@ retraction_extra_prime_amount = 0.8
retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
speed_layer_0 = =math.ceil(speed_print * 15 / 25)
speed_print = 25
speed_topbottom = =math.ceil(speed_print * 25 / 25)
speed_travel_layer_0 = 50
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
support_angle = 50

3
resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
View file

@ -27,7 +27,6 @@ material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_final_print_temperature = =material_print_temperature - 10
material_initial_print_temperature = =material_print_temperature - 5
material_print_temperature = =default_material_print_temperature - 15
material_print_temperature_layer_0 = =material_print_temperature + 3
multiple_mesh_overlap = 0
prime_tower_enable = False
prime_tower_size = 16
@ -37,10 +36,8 @@ retraction_extra_prime_amount = 0.8
retraction_hop = 2
retraction_hop_only_when_collides = True
retraction_min_travel = 0.8
speed_layer_0 = =math.ceil(speed_print * 15 / 25)
speed_print = 25
speed_topbottom = =math.ceil(speed_print * 25 / 25)
speed_travel_layer_0 = 50
speed_wall = =math.ceil(speed_print * 25 / 25)
speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
support_angle = 50

3
resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Draft_Print.inst.cfg
View file

@ -12,17 +12,14 @@ material = generic_tough_pla
variant = AA 0.4
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
cool_min_speed = 7
layer_height_0 = 0.2
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature - 10
prime_tower_enable = False
retraction_prime_speed = =retraction_speed
skin_overlap = 20
speed_layer_0 = =math.ceil(speed_print * 20 / 50)
speed_print = 50
speed_roofing = =math.ceil(speed_wall * 20 / 24)
speed_topbottom = =math.ceil(speed_print * 25 / 50)

3
resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Fast_Print.inst.cfg
View file

@ -12,15 +12,12 @@ material = generic_tough_pla
variant = AA 0.4
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
layer_height_0 = 0.2
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature - 10
prime_tower_enable = False
retraction_prime_speed = =retraction_speed
speed_layer_0 = =math.ceil(speed_print * 20 / 45)
speed_print = 45
speed_topbottom = =math.ceil(speed_print * 35 / 45)
speed_wall = =math.ceil(speed_print * 40 / 45)

3
resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_High_Quality.inst.cfg
View file

@ -12,17 +12,14 @@ material = generic_tough_pla
variant = AA 0.4
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
cool_min_speed = 10
layer_height_0 = 0.2
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature - 15
prime_tower_enable = False
retraction_prime_speed = =retraction_speed
skin_overlap = 10
speed_layer_0 = =math.ceil(speed_print * 20 / 45)
speed_print = 45
speed_topbottom = =math.ceil(speed_print * 35 / 45)
speed_wall = =math.ceil(speed_print * 40 / 45)

3
resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_Normal_Quality.inst.cfg
View file

@ -12,17 +12,14 @@ material = generic_tough_pla
variant = AA 0.4
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
cool_min_speed = 7
layer_height_0 = 0.2
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_print_temperature = =default_material_print_temperature - 15
prime_tower_enable = False
retraction_prime_speed = =retraction_speed
skin_overlap = 10
speed_layer_0 = =math.ceil(speed_print * 20 / 45)
speed_print = 45
speed_topbottom = =math.ceil(speed_print * 35 / 45)
speed_wall = =math.ceil(speed_print * 40 / 45)

1
resources/quality/ultimaker_s3/um_s3_aa0.4_TPLA_VeryDraft_Print.inst.cfg
View file

@ -17,7 +17,6 @@ acceleration_print = 2000
acceleration_topbottom = 1000
acceleration_wall = 1500
acceleration_wall_0 = 1000
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =cool_fan_speed
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
infill_sparse_density = 15

2
resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
View file

@ -28,7 +28,6 @@ material_final_print_temperature = =material_print_temperature
material_flow = 106
material_initial_print_temperature = =material_print_temperature
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =material_print_temperature + 15
multiple_mesh_overlap = 0
prime_tower_wipe_enabled = True
retraction_count_max = 15
@ -37,7 +36,6 @@ retraction_hop_only_when_collides = True
retraction_min_travel = =line_width * 2
skin_line_width = =round(line_width / 0.8, 2)
skin_overlap = 5
speed_layer_0 = =math.ceil(speed_print * 18 / 25)
speed_print = 25
speed_topbottom = =math.ceil(speed_print * 0.8)
speed_wall = =math.ceil(speed_print * 25 / 25)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
View file

@ -28,7 +28,6 @@ material_final_print_temperature = =material_print_temperature
material_flow = 106
material_initial_print_temperature = =material_print_temperature
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =material_print_temperature + 15
multiple_mesh_overlap = 0
prime_tower_wipe_enabled = True
retraction_count_max = 15
@ -37,7 +36,6 @@ retraction_hop_only_when_collides = True
retraction_min_travel = =line_width * 2
skin_line_width = =round(line_width / 0.8, 2)
skin_overlap = 5
speed_layer_0 = =math.ceil(speed_print * 18 / 25)
speed_print = 25
speed_topbottom = =math.ceil(speed_print * 0.8)
speed_wall = =math.ceil(speed_print * 25 / 25)

2
resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
View file

@ -27,7 +27,6 @@ machine_nozzle_heat_up_speed = 2.5
material_final_print_temperature = =material_print_temperature
material_flow = 106
material_initial_print_temperature = =material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature + 17
multiple_mesh_overlap = 0
prime_tower_wipe_enabled = True
retraction_count_max = 15
@ -36,7 +35,6 @@ retraction_hop_only_when_collides = True
retraction_min_travel = =line_width * 2
skin_line_width = =round(line_width / 0.8, 2)
skin_overlap = 5
speed_layer_0 = =math.ceil(speed_print * 18 / 25)
speed_print = 25
speed_topbottom = =math.ceil(speed_print * 0.8)
speed_wall = =math.ceil(speed_print * 25 / 25)

4
resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Fast_Print.inst.cfg
View file

@ -14,19 +14,15 @@ is_experimental = True
[values]
brim_width = 14
cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
machine_nozzle_cool_down_speed = 0.9
machine_nozzle_heat_up_speed = 1.4
material_print_temperature = =default_material_print_temperature - 10
material_print_temperature_layer_0 = =material_print_temperature
prime_tower_enable = True
retraction_combing_max_distance = 50
retraction_hop = 0.1
retraction_hop_enabled = False
skin_overlap = 0
speed_layer_0 = =math.ceil(speed_print * 15 / 50)
speed_print = 50
speed_slowdown_layers = 15
speed_topbottom = =math.ceil(speed_print * 35 / 50)
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 35 / 40)

4
resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Superdraft_Print.inst.cfg
View file

@ -14,20 +14,16 @@ is_experimental = True
[values]
brim_width = 14
cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
machine_nozzle_cool_down_speed = 0.9
machine_nozzle_heat_up_speed = 1.4
material_print_temperature = =default_material_print_temperature - 5
material_print_temperature_layer_0 = =material_print_temperature
prime_tower_enable = True
retraction_combing_max_distance = 50
retraction_hop = 0.1
retraction_hop_enabled = False
skin_overlap = 0
speed_infill = =math.ceil(speed_print * 40 / 50)
speed_layer_0 = =math.ceil(speed_print * 15 / 50)
speed_print = 50
speed_slowdown_layers = 8
speed_topbottom = =math.ceil(speed_print * 35 / 50)
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 35 / 40)

4
resources/quality/ultimaker_s3/um_s3_aa0.8_CPEP_Verydraft_Print.inst.cfg
View file

@ -14,19 +14,15 @@ is_experimental = True
[values]
brim_width = 14
cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
machine_nozzle_cool_down_speed = 0.9
machine_nozzle_heat_up_speed = 1.4
material_print_temperature = =default_material_print_temperature - 7
material_print_temperature_layer_0 = =material_print_temperature
prime_tower_enable = True
retraction_combing_max_distance = 50
retraction_hop = 0.1
retraction_hop_enabled = False
skin_overlap = 0
speed_layer_0 = =math.ceil(speed_print * 15 / 50)
speed_print = 50
speed_slowdown_layers = 10
speed_topbottom = =math.ceil(speed_print * 35 / 50)
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 35 / 40)

4
resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Fast_Print.inst.cfg
View file

@ -14,14 +14,10 @@ is_experimental = True
[values]
brim_width = 14
cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
material_print_temperature = =default_material_print_temperature - 5
material_print_temperature_layer_0 = =material_print_temperature
raft_airgap = 0.5
skin_overlap = 0
speed_layer_0 = =math.ceil(speed_print * 15 / 50)
speed_print = 50
speed_slowdown_layers = 15
speed_topbottom = =math.ceil(speed_print * 25 / 50)
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

4
resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Superdraft_Print.inst.cfg
View file

@ -14,14 +14,10 @@ is_experimental = True
[values]
brim_width = 14
cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
material_print_temperature_layer_0 = =material_print_temperature
raft_airgap = 0.5
skin_overlap = 0
speed_infill = =math.ceil(speed_print * 37 / 50)
speed_layer_0 = =math.ceil(speed_print * 15 / 50)
speed_print = 50
speed_slowdown_layers = 8
speed_topbottom = =math.ceil(speed_print * 25 / 50)
speed_wall = =math.ceil(speed_print * 37 / 50)
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

4
resources/quality/ultimaker_s3/um_s3_aa0.8_PC_Verydraft_Print.inst.cfg
View file

@ -14,14 +14,10 @@ is_experimental = True
[values]
brim_width = 14
cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
material_print_temperature = =default_material_print_temperature - 2
material_print_temperature_layer_0 = =material_print_temperature
raft_airgap = 0.5
skin_overlap = 0
speed_layer_0 = =math.ceil(speed_print * 15 / 50)
speed_print = 50
speed_slowdown_layers = 10
speed_topbottom = =math.ceil(speed_print * 25 / 50)
speed_wall = =math.ceil(speed_print * 40 / 50)
speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

1
resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg
View file

@ -14,7 +14,6 @@ variant = AA 0.8
[values]
brim_width = 7
cool_fan_speed = 20
initial_layer_line_width_factor = 100
material_print_temperature = =default_material_print_temperature - 5
prime_tower_enable = True
retraction_combing_max_distance = 8

1
resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
View file

@ -14,7 +14,6 @@ variant = AA 0.8
[values]
brim_width = 7
cool_fan_speed = 20
initial_layer_line_width_factor = 100
material_print_temperature = =default_material_print_temperature - 5
prime_tower_enable = True
retraction_combing_max_distance = 8

2
resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg
View file

@ -14,8 +14,6 @@ variant = AA 0.8
[values]
brim_width = 7
cool_fan_speed = 20
initial_layer_line_width_factor = 100
layer_height_0 = 0.27
material_print_temperature = =default_material_print_temperature - 5
prime_tower_enable = True
retraction_combing_max_distance = 8

2
resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Draft_Print.inst.cfg
View file

@ -12,11 +12,9 @@ material = generic_pla
variant = AA 0.8
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height
layer_height_0 = 0.4
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_final_print_temperature = =material_print_temperature - 15

2
resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Superdraft_Print.inst.cfg
View file

@ -12,11 +12,9 @@ material = generic_pla
variant = AA 0.8
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height
layer_height_0 = 0.4
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_final_print_temperature = =material_print_temperature - 15

2
resources/quality/ultimaker_s3/um_s3_aa0.8_PLA_Verydraft_Print.inst.cfg
View file

@ -12,11 +12,9 @@ material = generic_pla
variant = AA 0.8
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height
layer_height_0 = 0.4
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_final_print_temperature = =material_print_temperature - 15

1
resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
View file

@ -18,7 +18,6 @@ cool_min_speed = 17
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
material_bed_temperature_layer_0 = =material_bed_temperature
material_print_temperature = =default_material_print_temperature - 2
material_print_temperature_layer_0 = =default_material_print_temperature + 2
multiple_mesh_overlap = 0.2
prime_tower_enable = True
prime_tower_flow = 100

1
resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
View file

@ -18,7 +18,6 @@ cool_min_speed = 17
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
material_bed_temperature_layer_0 = =material_bed_temperature
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =default_material_print_temperature + 2
multiple_mesh_overlap = 0.2
prime_tower_enable = True
prime_tower_flow = 100

1
resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
View file

@ -17,7 +17,6 @@ cool_min_layer_time_fan_speed_max = 6
cool_min_speed = 17
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
material_bed_temperature_layer_0 = =material_bed_temperature
material_print_temperature_layer_0 = =default_material_print_temperature + 2
multiple_mesh_overlap = 0.2
prime_tower_enable = True
prime_tower_flow = 100

2
resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Draft_Print.inst.cfg
View file

@ -12,12 +12,10 @@ material = generic_tough_pla
variant = AA 0.8
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
layer_height_0 = 0.4
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_final_print_temperature = =material_print_temperature - 15

2
resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Superdraft_Print.inst.cfg
View file

@ -12,12 +12,10 @@ material = generic_tough_pla
variant = AA 0.8
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
layer_height_0 = 0.4
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_final_print_temperature = =material_print_temperature - 15

3
resources/quality/ultimaker_s3/um_s3_aa0.8_TPLA_Verydraft_Print.inst.cfg
View file

@ -12,18 +12,15 @@ material = generic_tough_pla
variant = AA 0.8
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height
infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'cubic'
layer_height_0 = 0.4
machine_nozzle_cool_down_speed = 0.75
machine_nozzle_heat_up_speed = 1.6
material_final_print_temperature = =material_print_temperature - 15
material_initial_print_temperature = =material_print_temperature - 10
material_print_temperature = =default_material_print_temperature + 5
material_print_temperature_layer_0 = =material_print_temperature
prime_tower_enable = False
speed_infill = =math.ceil(speed_print * 30 / 35)
speed_print = 35

1
resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
View file

@ -21,7 +21,6 @@ material_final_print_temperature = =material_print_temperature
material_flow = 105
material_initial_print_temperature = =material_print_temperature
material_print_temperature = =default_material_print_temperature - 2
material_print_temperature_layer_0 = =material_print_temperature + 19
multiple_mesh_overlap = 0.2
prime_tower_enable = True
prime_tower_flow = 100

1
resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
View file

@ -22,7 +22,6 @@ material_final_print_temperature = =material_print_temperature
material_flow = 105
material_initial_print_temperature = =material_print_temperature
material_print_temperature = =default_material_print_temperature + 2
material_print_temperature_layer_0 = =material_print_temperature + 15
multiple_mesh_overlap = 0.2
prime_tower_enable = True
prime_tower_flow = 100

1
resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
View file

@ -21,7 +21,6 @@ machine_nozzle_heat_up_speed = 2.5
material_final_print_temperature = =material_print_temperature
material_flow = 105
material_initial_print_temperature = =material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature + 17
multiple_mesh_overlap = 0.2
prime_tower_enable = True
prime_tower_flow = 100

2
resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Draft_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

2
resources/quality/ultimaker_s3/um_s3_cc0.4_CFFCPE_Fast_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

2
resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Draft_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

2
resources/quality/ultimaker_s3/um_s3_cc0.4_CFFPA_Fast_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

2
resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Draft_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

2
resources/quality/ultimaker_s3/um_s3_cc0.4_GFFCPE_Fast_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

2
resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Draft_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

2
resources/quality/ultimaker_s3/um_s3_cc0.4_GFFPA_Fast_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

1
resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Draft_Print.inst.cfg
View file

@ -13,7 +13,6 @@ variant = CC 0.4
is_experimental = True
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height

1
resources/quality/ultimaker_s3/um_s3_cc0.4_PLA_Fast_Print.inst.cfg
View file

@ -13,7 +13,6 @@ variant = CC 0.4
is_experimental = True
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height

2
resources/quality/ultimaker_s3/um_s3_cc0.6_CFFCPE_Draft_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

2
resources/quality/ultimaker_s3/um_s3_cc0.6_CFFPA_Draft_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

2
resources/quality/ultimaker_s3/um_s3_cc0.6_GFFCPE_Draft_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

2
resources/quality/ultimaker_s3/um_s3_cc0.6_GFFPA_Draft_Print.inst.cfg
View file

@ -16,10 +16,8 @@ cool_fan_enabled = True
cool_min_layer_time = 7
cool_min_layer_time_fan_speed_max = 15
cool_min_speed = 6
initial_layer_line_width_factor = 130.0
material_bed_temperature_layer_0 = =material_bed_temperature + 5
material_print_temperature = =default_material_print_temperature
material_print_temperature_layer_0 = =material_print_temperature
skin_overlap = 20
support_bottom_distance = =support_z_distance / 2
support_top_distance = =support_z_distance

1
resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
View file

@ -13,7 +13,6 @@ variant = CC 0.6
is_experimental = True
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height

1
resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Fast_Print.inst.cfg
View file

@ -13,7 +13,6 @@ variant = CC 0.6
is_experimental = True
[values]
cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
cool_fan_speed_max = =100
cool_min_speed = 2
gradual_infill_step_height = =3 * layer_height