Merge remote-tracking branch 'origin/CURA-10783_prime_tower_with_raft' into CURA-10783_prime_tower_with_raft

resources/definitions/Mark2_for_Ultimaker2.def.json

@@ -162,4 +162,4 @@
             "value": "retraction_speed"
         }
     }
-}
+}

resources/definitions/SV02.def.json

@@ -71,4 +71,4 @@
         "top_bottom_thickness": { "default_value": 1 },
         "wall_0_wipe_dist": { "value": 0.0 }
     }
-}
+}

resources/definitions/atmat_signal_pro_base.def.json

@@ -171,4 +171,4 @@
         "wall_overhang_speed_factor": { "value": "50" },
         "zig_zaggify_infill": { "value": "True" }
     }
-}
+}

resources/definitions/bibo2_dual.def.json

@@ -43,4 +43,4 @@
         "machine_width": { "default_value": 214 },
         "speed_print": { "default_value": 40 }
     }
-}
+}

resources/definitions/builder_premium_large.def.json

@@ -100,4 +100,4 @@
         "travel_retract_before_outer_wall": { "default_value": true },
         "wall_thickness": { "value": "1.2" }
     }
-}
+}

resources/definitions/builder_premium_medium.def.json

@@ -100,4 +100,4 @@
         "travel_retract_before_outer_wall": { "default_value": true },
         "wall_thickness": { "value": "1.2" }
     }
-}
+}

resources/definitions/builder_premium_small.def.json

@@ -99,4 +99,4 @@
         "travel_retract_before_outer_wall": { "default_value": true },
         "wall_thickness": { "value": "1.2" }
     }
-}
+}

resources/definitions/cartesio.def.json

@@ -69,4 +69,4 @@
         "prime_tower_size": { "value": 24.0 },
         "retraction_extra_prime_amount": { "minimum_value_warning": "-2.0" }
     }
-}
+}

resources/definitions/deltacomb_base.def.json

@@ -85,4 +85,4 @@
         "travel_avoid_supports": { "value": "True" },
         "z_seam_corner": { "value": "'z_seam_corner_weighted'" }
     }
-}
+}

resources/definitions/dxu.def.json

@@ -156,4 +156,4 @@
             "value": "retraction_speed"
         }
     }
-}
+}

resources/definitions/felixpro2dual.def.json

@@ -64,4 +64,4 @@
         "top_bottom_thickness": { "default_value": 1 },
         "wall_thickness": { "value": "1" }
     }
-}
+}

resources/definitions/geeetech_A30M.def.json

@@ -32,4 +32,4 @@
         "machine_start_gcode": { "default_value": ";Geeetech A30M Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
         "machine_width": { "default_value": 320 }
     }
-}
+}

resources/definitions/geeetech_A30T.def.json

@@ -33,4 +33,4 @@
         "machine_start_gcode": { "default_value": ";Geeetech A30T Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
         "machine_width": { "default_value": 320 }
     }
-}
+}

resources/definitions/geeetech_I3ProC.def.json

@@ -33,4 +33,4 @@
         "machine_width": { "default_value": 200 },
         "retraction_amount": { "value": 2 }
     }
-}
+}

resources/definitions/geeetech_MizarM.def.json

@@ -33,4 +33,4 @@
         "machine_width": { "default_value": 255 },
         "material_standby_temperature": { "value": 200 }
     }
-}
+}

resources/definitions/hms434.def.json

@@ -182,4 +182,4 @@
         "z_seam_x": { "value": "300" },
         "z_seam_y": { "value": "325" }
     }
-}
+}

resources/definitions/leapfrog_bolt_pro.def.json

@@ -86,4 +86,4 @@
         "skirt_line_count": { "default_value": 3 },
         "speed_travel": { "value": "200" }
     }
-}
+}

resources/definitions/lnl3d_d3.def.json

@@ -19,4 +19,4 @@
         "machine_name": { "default_value": "LNL3D D3" },
         "machine_width": { "default_value": 300 }
     }
-}
+}

resources/definitions/lnl3d_d3_vulcan.def.json

@@ -19,4 +19,4 @@
         "machine_name": { "default_value": "LNL3D D3 Vulcan" },
         "machine_width": { "default_value": 295 }
     }
-}
+}

resources/definitions/lnl3d_d5.def.json

@@ -19,4 +19,4 @@
         "machine_name": { "default_value": "LNL3D D5" },
         "machine_width": { "default_value": 500 }
     }
-}
+}

resources/definitions/lnl3d_d6.def.json

@@ -19,4 +19,4 @@
         "machine_name": { "default_value": "LNL3D D6" },
         "machine_width": { "default_value": 600 }
     }
-}
+}

resources/definitions/lotmaxx_sc60.def.json

@@ -67,4 +67,4 @@
         "z_seam_type": { "default_value": "sharpest_corner" },
         "zig_zaggify_infill": { "value": true }
     }
-}
+}

resources/definitions/makeit_pro_l.def.json

@@ -49,4 +49,4 @@
         "speed_print": { "default_value": 60 },
         "wall_thickness": { "value": "1.2" }
     }
-}
+}

resources/definitions/makeit_pro_m.def.json

@@ -48,4 +48,4 @@
         "speed_print": { "default_value": 60 },
         "wall_thickness": { "value": "1.2" }
     }
-}
+}

resources/definitions/makeit_pro_mx.def.json

@@ -48,4 +48,4 @@
         "speed_print": { "default_value": 60 },
         "wall_thickness": { "value": "1.2" }
     }
-}
+}

resources/definitions/raise3D_N2_dual.def.json

@@ -44,4 +44,4 @@
         "machine_width": { "default_value": 305 },
         "retraction_amount": { "default_value": 1.0 }
     }
-}
+}

resources/definitions/raise3D_N2_plus_dual.def.json

@@ -44,4 +44,4 @@
         "machine_width": { "default_value": 305 },
         "retraction_amount": { "default_value": 1.0 }
     }
-}
+}

resources/definitions/raise3D_N2_plus_single.def.json

@@ -39,4 +39,4 @@
         "machine_width": { "default_value": 305 },
         "retraction_amount": { "default_value": 1.0 }
     }
-}
+}

resources/definitions/raise3D_N2_single.def.json

@@ -39,4 +39,4 @@
         "machine_width": { "default_value": 305 },
         "retraction_amount": { "default_value": 1.0 }
     }
-}
+}

resources/definitions/skriware_2.def.json

@@ -263,4 +263,4 @@
         "z_seam_x": { "value": "115" },
         "z_seam_y": { "value": "180" }
     }
-}
+}

resources/definitions/stereotech_ste320.def.json

@@ -47,4 +47,4 @@
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_width": { "default_value": 218 }
     }
-}
+}

resources/definitions/strateo3d.def.json

@@ -274,4 +274,4 @@
         "travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
         "wall_thickness": { "value": "wall_line_width_0 + wall_line_width_x" }
     }
-}
+}

resources/definitions/strateo3d_IDEX420.def.json

@@ -230,4 +230,4 @@
         "travel_avoid_distance": { "value": "3" },
         "wall_line_count": { "value": "4" }
     }
-}
+}

resources/definitions/ultimaker3.def.json

@@ -175,4 +175,4 @@
         "wall_0_inset": { "value": "0" },
         "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
     }
-}
+}

resources/definitions/ultimaker_original_dual.def.json

@@ -91,4 +91,4 @@
         "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
         "machine_width": { "default_value": 205 }
     }
-}
+}