profiles: did all profiles ABS and CPE with Paul by hand (CURA-1195)

also reordered settings to match Pauls sheet

resources/profiles/ultimaker2+/abs_0.25_normal.curaprofile

@@ -8,18 +8,19 @@ weight = -2
 
 [settings]
 layer_height = 0.06
-top_bottom_thickness = 0.72
-layer_height_0 = 0.15
-speed_wall_x = 25
 wall_thickness = 0.88
+line_width = 0.22
+top_bottom_thickness = 0.72
+infill_sparse_density = 22
+speed_print = 20
+layer_height_0 = 0.15
+speed_layer_0 = 20
 speed_infill = 30
 speed_topbottom = 20
-speed_print = 20
-cool_min_speed = 25
-line_width = 0.22
-infill_sparse_density = 22
 speed_wall_0 = 20
+speed_wall_x = 25
 cool_min_layer_time = 2
+cool_min_speed = 10
 cool_lift_head = True
-cool_fan_speed_min = 50
+cool_fan_speed_min = 20
 

resources/profiles/ultimaker2+/abs_0.4_fast.curaprofile

@@ -8,18 +8,19 @@ weight = -1
 
 [settings]
 layer_height = 0.15
-top_bottom_thickness = 0.75
-layer_height_0 = 0.26
-speed_print = 40
 wall_thickness = 0.7
+line_width = 0.35
+top_bottom_thickness = 0.75
+infill_sparse_density = 18
+speed_print = 40
+layer_height_0 = 0.26
+speed_travel = 150
 speed_infill = 55
 speed_topbottom = 30
+speed_wall_0 = 30
+speed_wall_x = 40
 cool_min_layer_time = 3
 cool_min_speed = 20
-line_width = 0.35
-infill_sparse_density = 18
-speed_travel = 150
-speed_wall_0 = 30
 cool_lift_head = True
 cool_fan_speed_min = 50
 

resources/profiles/ultimaker2+/abs_0.4_high.curaprofile

@@ -8,17 +8,19 @@ weight = -3
 
 [settings]
 layer_height = 0.06
-top_bottom_thickness = 0.72
-layer_height_0 = 0.26
-speed_print = 30
 wall_thickness = 1.05
+line_width = 0.35
+top_bottom_thickness = 0.72
+infill_sparse_density = 22
+speed_print = 30
+layer_height_0 = 0.26
+speed_layer_0 = 20
 speed_infill = 45
 speed_topbottom = 20
-cool_min_speed = 20
-line_width = 0.35
-infill_sparse_density = 22
 speed_wall_0 = 20
+speed_wall_x = 30
 cool_min_layer_time = 3
+cool_min_speed = 10
+cool_fan_speed_min = 20
 cool_lift_head = True
-cool_fan_speed_min = 50
 

resources/profiles/ultimaker2+/abs_0.4_normal.curaprofile

@@ -7,15 +7,19 @@ material = ABS
 weight = -2
 
 [settings]
-layer_height_0 = 0.26
-speed_print = 30
+layer_height = 0.1
 wall_thickness = 1.05
+line_width = 0.35
+top_bottom_thickness = 0.8
+speed_print = 30
+layer_height_0 = 0.26
+speed_layer_0 = 20
 speed_infill = 45
 speed_topbottom = 20
-cool_min_layer_time = 3
-cool_min_speed = 20
-line_width = 0.35
 speed_wall_0 = 20
-cool_lift_head = True
+speed_wall_x = 30
+cool_min_layer_time = 3
 cool_fan_speed_min = 50
+cool_min_speed = 10
+cool_lift_head = True
 

resources/profiles/ultimaker2+/abs_0.6_normal.curaprofile

@@ -8,17 +8,19 @@ weight = -2
 
 [settings]
 layer_height = 0.15
-top_bottom_thickness = 1.2
-layer_height_0 = 0.39
-speed_print = 25
-speed_wall_x = 30
 wall_thickness = 1.59
-speed_infill = 55
-speed_topbottom = 20
-cool_min_speed = 20
 line_width = 0.53
+top_bottom_thickness = 1.2
+infill_sparse_density = 20
+speed_print = 25
+layer_height_0 = 0.39
+speed_layer_0 = 20
+speed_infill = 40
+speed_topbottom = 20
 speed_wall_0 = 20
+speed_wall_x = 30
 cool_min_layer_time = 3
-cool_lift_head = True
 cool_fan_speed_min = 50
+cool_min_speed = 20
+cool_lift_head = True
 

resources/profiles/ultimaker2+/abs_0.8_normal.curaprofile

@@ -8,17 +8,20 @@ weight = -2
 
 [settings]
 layer_height = 0.2
-top_bottom_thickness = 1.2
-layer_height_0 = 0.5
-speed_print = 20
-speed_wall_x = 30
 wall_thickness = 2.1
+line_width = 0.7
+speed_print = 20
+top_bottom_thickness = 1.2
+infill_sparse_density = 20
+layer_height_0 = 0.5
+speed_wall_x = 30
+speed_layer_0 = 20
 speed_infill = 40
 speed_topbottom = 20
-cool_min_speed = 15
-line_width = 0.7
 speed_wall_0 = 20
+speed_wall_x = 30
 cool_min_layer_time = 3
-cool_lift_head = True
 cool_fan_speed_min = 50
+cool_min_speed = 15
+cool_lift_head = True
 

resources/profiles/ultimaker2+/cpe_0.25_normal.curaprofile

@@ -7,19 +7,20 @@ material = CPE
 weight = -2
 
 [settings]
-infill_overlap = 17
 layer_height = 0.06
 wall_thickness = 0.88
-layer_height_0 = 0.15
-speed_wall_x = 25
+line_width = 0.22
 top_bottom_thickness = 0.72
+infill_sparse_density = 22
+speed_print = 20
+layer_height_0 = 0.15
+speed_layer_0 = 20
 speed_infill = 30
 speed_topbottom = 20
-cool_min_layer_time = 2
-speed_print = 20
-line_width = 0.22
-infill_sparse_density = 22
 speed_wall_0 = 20
-cool_lift_head = True
+speed_wall_x = 25
+cool_min_layer_time = 2
 cool_fan_speed_min = 50
+cool_lift_head = True
+infill_overlap = 17
 

resources/profiles/ultimaker2+/cpe_0.4_fast.curaprofile

@@ -7,20 +7,22 @@ material = CPE
 weight = -1
 
 [settings]
-infill_overlap = 17
-cool_min_layer_time = 3
 layer_height = 0.15
 wall_thickness = 0.7
-layer_height_0 = 0.26
-speed_print = 30
-speed_wall_x = 40
+line_width = 0.35
 top_bottom_thickness = 0.75
+infill_sparse_density = 18
+speed_print = 40
+layer_height_0 = 0.26
+speed_travel = 150
+speed_layer_0 = 30
 speed_infill = 45
 speed_topbottom = 20
-speed_travel = 150
-line_width = 0.35
-infill_sparse_density = 18
 speed_wall_0 = 30
-cool_lift_head = True
+speed_wall_x = 40
+cool_min_layer_time = 3
 cool_fan_speed_min = 50
+cool_min_speed = 10
+cool_lift_head = True
+infill_overlap = 17
 

resources/profiles/ultimaker2+/cpe_0.4_high.curaprofile

@@ -8,17 +8,21 @@ weight = -3
 
 [settings]
 layer_height = 0.06
-top_bottom_thickness = 0.72
-layer_height_0 = 0.26
-speed_print = 20
-speed_wall_x = 30
 wall_thickness = 1.05
+line_width = 0.35
+top_bottom_thickness = 0.72
+infill_sparse_density = 22
+speed_print = 20
+layer_height_0 = 0.26
+speed_layer_0 = 20
 speed_infill = 45
 speed_topbottom = 20
-line_width = 0.35
-infill_sparse_density = 22
 speed_wall_0 = 20
+speed_wall_x = 30
 cool_min_layer_time = 3
-cool_lift_head = True
 cool_fan_speed_min = 50
+cool_min_speed = 10
+cool_lift_head = True
+infill_overlap = 15
+
 

resources/profiles/ultimaker2+/cpe_0.4_normal.curaprofile

@@ -7,15 +7,21 @@ material = CPE
 weight = -2
 
 [settings]
-layer_height_0 = 0.26
-speed_print = 20
-speed_wall_x = 30
+layer_height = 0.1
 wall_thickness = 1.05
+line_width = 0.35
+top_bottom_thickness = 0.8
+infill_sparse_density = 20
+speed_print = 30
+layer_height_0 = 0.26
+speed_layer_0 = 20
 speed_infill = 45
 speed_topbottom = 20
-cool_min_layer_time = 3
-line_width = 0.35
 speed_wall_0 = 20
-cool_lift_head = True
+speed_wall_x = 30
+cool_min_layer_time = 3
 cool_fan_speed_min = 50
+cool_min_speed = 10
+cool_lift_head = True
+infill_overlap = 15
 

resources/profiles/ultimaker2+/cpe_0.6_normal.curaprofile

@@ -7,18 +7,20 @@ material = CPE
 weight = -2
 
 [settings]
-infill_overlap = 17
 layer_height = 0.15
-top_bottom_thickness = 1.2
-layer_height_0 = 0.39
-speed_wall_x = 30
 wall_thickness = 1.59
+line_width = 0.53
+top_bottom_thickness = 1.2
+infill_sparse_density = 20
+speed_print = 25
+layer_height_0 = 0.4
+speed_layer_0 = 20
 speed_infill = 40
 speed_topbottom = 20
-cool_min_layer_time = 3
-speed_print = 20
-line_width = 0.53
 speed_wall_0 = 20
-cool_lift_head = True
+speed_wall_x = 30
+cool_min_layer_time = 3
 cool_fan_speed_min = 50
+cool_lift_head = True
+infill_overlap = 17
 

resources/profiles/ultimaker2+/cpe_0.8_normal.curaprofile

@@ -7,18 +7,20 @@ material = CPE
 weight = -2
 
 [settings]
-infill_overlap = 17
 layer_height = 0.2
-top_bottom_thickness = 1.2
-layer_height_0 = 0.5
-speed_wall_x = 30
 wall_thickness = 2.1
+line_width = 0.7
+top_bottom_thickness = 1.2
+infill_sparse_density = 20
+speed_print = 20
+layer_height_0 = 0.5
+speed_layer_o = 20
 speed_infill = 40
 speed_topbottom = 20
-cool_min_layer_time = 3
-speed_print = 20
-line_width = 0.7
 speed_wall_0 = 20
-cool_lift_head = True
+speed_wall_x = 30
+cool_min_layer_time = 3
 cool_fan_speed_min = 50
+cool_lift_head = True
+infill_overlap = 17