mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-12-05 16:51:12 -07:00
Merge branch 'main' into master
This commit is contained in:
just-trey
GitHub
commit
20f9bd3f80
283 changed files with 6076 additions and 2421 deletions
148
resources/definitions/Geeetech_Base_Dual_Extruder.def.json
Normal file
148
resources/definitions/Geeetech_Base_Dual_Extruder.def.json
Normal file
|
|
@ -0,0 +1,148 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech Base Dual-Extruder Printer",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata":
|
||||
{
|
||||
"visible": false,
|
||||
"author": "Teddy.Hu",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"first_start_actions": [ "MachineSettingsAction" ],
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"has_variants": false,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "Geeetech_Dual_Extruder_0",
|
||||
"1": "Geeetech_Dual_Extruder_1"
|
||||
},
|
||||
"preferred_material": "generic_pla",
|
||||
"preferred_quality_type": "standard",
|
||||
"preferred_variant_name": "0.4mm Nozzle",
|
||||
"quality_definition": "Geeetech_Base_Single_Extruder",
|
||||
"variants_name": "Nozzle Size"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_print": { "value": 500 },
|
||||
"acceleration_travel": { "value": 500 },
|
||||
"acceleration_travel_layer_0": { "value": "acceleration_travel" },
|
||||
"adhesion_type": { "value": "'skirt'" },
|
||||
"brim_replaces_support": { "value": false },
|
||||
"cool_min_layer_time": { "value": "1.3 if speed_infill>=200 else 5" },
|
||||
"gantry_height": { "value": 40 },
|
||||
"infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'" },
|
||||
"line_width": { "value": "1.125*machine_nozzle_size if speed_infill<=100 else machine_nozzle_size" },
|
||||
"machine_acceleration": { "value": 500 },
|
||||
"machine_depth": { "default_value": 350 },
|
||||
"machine_end_gcode": { "default_value": ";Geeetech Custom end G-code\nG91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers\n\n\n" },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-40, 40],
|
||||
[40, 40],
|
||||
[40, -40],
|
||||
[-40, -40]
|
||||
]
|
||||
},
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_height": { "default_value": 350 },
|
||||
"machine_max_acceleration_e": { "value": 1000 },
|
||||
"machine_max_acceleration_x": { "value": 500 },
|
||||
"machine_max_acceleration_y": { "value": 500 },
|
||||
"machine_max_acceleration_z": { "value": 111 },
|
||||
"machine_max_feedrate_e": { "value": 40 },
|
||||
"machine_max_feedrate_x": { "value": 500 },
|
||||
"machine_max_feedrate_y": { "value": 500 },
|
||||
"machine_max_feedrate_z": { "value": 10 },
|
||||
"machine_max_jerk_e": { "value": 4.9 },
|
||||
"machine_max_jerk_xy": { "value": 10 },
|
||||
"machine_max_jerk_z": { "value": 0.3 },
|
||||
"machine_name": { "default_value": "Geeetech Base Dual-Extruder Printer" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech Custom Start G-code\nM104 S{material_print_temperature_layer_0} ;Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ;Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ;Wait for Hotend Temperature\nG92 E0 ;Reset Extruder\nG28 ;Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ;ON Light\n;M106 P0 S383 ;ON MainFan 150% if need\n;M106 P1 S255 ;ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ;Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ;Draw the first line\nG92 E0 ;Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ;Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ;Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 350 },
|
||||
"material_bed_temperature": { "maximum_value_warning": 110 },
|
||||
"material_final_print_temperature": { "value": "material_print_temperature" },
|
||||
"material_initial_print_temperature":
|
||||
{
|
||||
"minimum_value_warning": "material_standby_temperature - 10",
|
||||
"value": "material_print_temperature - 5"
|
||||
},
|
||||
"material_print_temperature":
|
||||
{
|
||||
"maximum_value": "250",
|
||||
"value": "200 if speed_infill <=100 else 210 if speed_infill <= 150 else 220 if speed_infill <= 180 else 230"
|
||||
},
|
||||
"material_print_temperature_layer_0":
|
||||
{
|
||||
"maximum_value_warning": 250,
|
||||
"value": "material_print_temperature + 5"
|
||||
},
|
||||
"minimum_interface_area": { "value": 10 },
|
||||
"minimum_support_area": { "value": 2 },
|
||||
"optimize_wall_printing_order": { "value": true },
|
||||
"prime_tower_brim_enable": { "value": true },
|
||||
"prime_tower_min_volume":
|
||||
{
|
||||
"maximum_value_warning": 150,
|
||||
"value": 85
|
||||
},
|
||||
"prime_tower_size": { "value": 30 },
|
||||
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'all'" },
|
||||
"retraction_combing_max_distance": { "value": 30 },
|
||||
"retraction_hop": { "value": 0.5 },
|
||||
"retraction_speed": { "value": 35 },
|
||||
"skirt_brim_speed":
|
||||
{
|
||||
"maximum_value_warning": "60",
|
||||
"value": "speed_print_layer_0"
|
||||
},
|
||||
"skirt_gap": { "value": 6 },
|
||||
"small_hole_max_size": { "value": "5 if speed_infill>=150 else 0" },
|
||||
"speed_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "100",
|
||||
"value": "50 if speed_infill <= 150 else 75"
|
||||
},
|
||||
"speed_print_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "60",
|
||||
"value": "25 if speed_infill <= 150 else 35"
|
||||
},
|
||||
"speed_support": { "value": "speed_print*0.5" },
|
||||
"speed_support_bottom": { "value": "speed_support_roof" },
|
||||
"speed_support_interface": { "value": "speed_support / 0.8" },
|
||||
"speed_support_roof": { "value": "speed_support_interface / 2" },
|
||||
"speed_topbottom": { "value": "speed_print" },
|
||||
"speed_travel": { "value": "200 if 120<=speed_print<=200 else speed_print if speed_print>200 else 120" },
|
||||
"speed_travel_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "150",
|
||||
"value": "speed_layer_0"
|
||||
},
|
||||
"speed_wall": { "value": "60 if speed_print==60 else math.ceil(round(speed_print*0.90))" },
|
||||
"speed_wall_0": { "value": "30 if speed_print==60 else math.ceil(round(speed_print*0.75))" },
|
||||
"speed_wall_x": { "value": "60 if speed_print==60 else math.ceil(round(speed_print*0.90))" },
|
||||
"support_brim_enable": { "value": true },
|
||||
"support_brim_width": { "value": 5 },
|
||||
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
||||
"support_interface_density": { "value": 33.333 },
|
||||
"support_interface_height": { "value": "layer_height * 3" },
|
||||
"support_interface_pattern": { "value": "zigzag" },
|
||||
"support_interface_skip_height": { "value": 0.2 },
|
||||
"support_pattern": { "value": "'zigzag'" },
|
||||
"support_use_towers": { "value": false },
|
||||
"support_wall_count": { "value": 0 },
|
||||
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
||||
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
||||
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
|
||||
"top_bottom_thickness": { "value": "layer_height_0 + layer_height * 3" },
|
||||
"travel_avoid_supports": { "value": true },
|
||||
"wall_thickness": { "value": "line_width * 2" },
|
||||
"wall_transition_filter_deviation": { "value": 0.15 },
|
||||
"z_seam_corner": { "value": "'z_seam_corner_inner'" },
|
||||
"z_seam_type": { "value": "'sharpest_corner'" }
|
||||
}
|
||||
}
|
||||
149
resources/definitions/Geeetech_Base_Multi_Extruder.def.json
Normal file
149
resources/definitions/Geeetech_Base_Multi_Extruder.def.json
Normal file
|
|
@ -0,0 +1,149 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech Base Multi-Extruder Printer",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata":
|
||||
{
|
||||
"visible": false,
|
||||
"author": "Teddy.Hu",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"first_start_actions": [ "MachineSettingsAction" ],
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"has_variants": false,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "Geeetech_Multi_Extruder_0",
|
||||
"1": "Geeetech_Multi_Extruder_1",
|
||||
"2": "Geeetech_Multi_Extruder_2"
|
||||
},
|
||||
"preferred_material": "generic_pla",
|
||||
"preferred_quality_type": "standard",
|
||||
"preferred_variant_name": "0.4mm Nozzle",
|
||||
"quality_definition": "Geeetech_Base_Single_Extruder",
|
||||
"variants_name": "Nozzle Size"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_print": { "value": 500 },
|
||||
"acceleration_travel": { "value": 500 },
|
||||
"acceleration_travel_layer_0": { "value": "acceleration_travel" },
|
||||
"adhesion_type": { "value": "'skirt'" },
|
||||
"brim_replaces_support": { "value": false },
|
||||
"cool_min_layer_time": { "value": "1.3 if speed_infill>=200 else 5" },
|
||||
"gantry_height": { "value": 40 },
|
||||
"infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'" },
|
||||
"line_width": { "value": "1.125*machine_nozzle_size if speed_infill<=100 else machine_nozzle_size" },
|
||||
"machine_acceleration": { "value": 500 },
|
||||
"machine_depth": { "default_value": 350 },
|
||||
"machine_end_gcode": { "default_value": ";Geeetech Custom end G-code\nG91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers\n\n\n" },
|
||||
"machine_extruder_count": { "default_value": 3 },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-40, 40],
|
||||
[40, 40],
|
||||
[40, -40],
|
||||
[-40, -40]
|
||||
]
|
||||
},
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_height": { "default_value": 350 },
|
||||
"machine_max_acceleration_e": { "value": 1000 },
|
||||
"machine_max_acceleration_x": { "value": 500 },
|
||||
"machine_max_acceleration_y": { "value": 500 },
|
||||
"machine_max_acceleration_z": { "value": 111 },
|
||||
"machine_max_feedrate_e": { "value": 40 },
|
||||
"machine_max_feedrate_x": { "value": 500 },
|
||||
"machine_max_feedrate_y": { "value": 500 },
|
||||
"machine_max_feedrate_z": { "value": 10 },
|
||||
"machine_max_jerk_e": { "value": 4.9 },
|
||||
"machine_max_jerk_xy": { "value": 10 },
|
||||
"machine_max_jerk_z": { "value": 0.3 },
|
||||
"machine_name": { "default_value": "Geeetech Base Multi-Extruder Printer" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech Custom Start G-code\nM104 S{material_print_temperature_layer_0} ;Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ;Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ;Wait for Hotend Temperature\nG92 E0 ;Reset Extruder\nG28 ;Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ;ON Light\n;M106 P0 S383 ;ON MainFan 150% if need\n;M106 P1 S255 ;ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ;Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ;Draw the first line\nG92 E0 ;Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ;Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ;Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 350 },
|
||||
"material_bed_temperature": { "maximum_value_warning": 110 },
|
||||
"material_final_print_temperature": { "value": "material_print_temperature" },
|
||||
"material_initial_print_temperature":
|
||||
{
|
||||
"minimum_value_warning": "material_standby_temperature - 10",
|
||||
"value": "material_print_temperature - 5"
|
||||
},
|
||||
"material_print_temperature":
|
||||
{
|
||||
"maximum_value": "250",
|
||||
"value": "200 if speed_infill <=100 else 210 if speed_infill <= 150 else 220 if speed_infill <= 180 else 230"
|
||||
},
|
||||
"material_print_temperature_layer_0":
|
||||
{
|
||||
"maximum_value_warning": 250,
|
||||
"value": "material_print_temperature + 5"
|
||||
},
|
||||
"minimum_interface_area": { "value": 10 },
|
||||
"minimum_support_area": { "value": 2 },
|
||||
"optimize_wall_printing_order": { "value": true },
|
||||
"prime_tower_brim_enable": { "value": true },
|
||||
"prime_tower_min_volume":
|
||||
{
|
||||
"maximum_value_warning": 150,
|
||||
"value": 85
|
||||
},
|
||||
"prime_tower_size": { "value": 30 },
|
||||
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'all'" },
|
||||
"retraction_combing_max_distance": { "value": 30 },
|
||||
"retraction_hop": { "value": 0.5 },
|
||||
"retraction_speed": { "value": 35 },
|
||||
"skirt_brim_speed":
|
||||
{
|
||||
"maximum_value_warning": "60",
|
||||
"value": "speed_print_layer_0"
|
||||
},
|
||||
"skirt_gap": { "value": 6 },
|
||||
"small_hole_max_size": { "value": "5 if speed_infill>=150 else 0" },
|
||||
"speed_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "100",
|
||||
"value": "50 if speed_infill <= 150 else 75"
|
||||
},
|
||||
"speed_print_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "60",
|
||||
"value": "25 if speed_infill <= 150 else 35"
|
||||
},
|
||||
"speed_support": { "value": "speed_print*0.5" },
|
||||
"speed_support_bottom": { "value": "speed_support_roof" },
|
||||
"speed_support_interface": { "value": "speed_support / 0.8" },
|
||||
"speed_support_roof": { "value": "speed_support_interface / 2" },
|
||||
"speed_topbottom": { "value": "speed_print" },
|
||||
"speed_travel": { "value": "200 if 120<=speed_print<=200 else speed_print if speed_print>200 else 120" },
|
||||
"speed_travel_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "150",
|
||||
"value": "speed_layer_0"
|
||||
},
|
||||
"speed_wall": { "value": "60 if speed_print==60 else math.ceil(round(speed_print*0.90))" },
|
||||
"speed_wall_0": { "value": "30 if speed_print==60 else math.ceil(round(speed_print*0.75))" },
|
||||
"speed_wall_x": { "value": "60 if speed_print==60 else math.ceil(round(speed_print*0.90))" },
|
||||
"support_brim_enable": { "value": true },
|
||||
"support_brim_width": { "value": 5 },
|
||||
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
||||
"support_interface_density": { "value": 33.333 },
|
||||
"support_interface_height": { "value": "layer_height * 3" },
|
||||
"support_interface_pattern": { "value": "zigzag" },
|
||||
"support_interface_skip_height": { "value": 0.2 },
|
||||
"support_pattern": { "value": "'zigzag'" },
|
||||
"support_use_towers": { "value": false },
|
||||
"support_wall_count": { "value": 0 },
|
||||
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
||||
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
||||
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
|
||||
"top_bottom_thickness": { "value": "layer_height_0 + layer_height * 3" },
|
||||
"travel_avoid_supports": { "value": true },
|
||||
"wall_thickness": { "value": "line_width * 2" },
|
||||
"wall_transition_filter_deviation": { "value": 0.15 },
|
||||
"z_seam_corner": { "value": "'z_seam_corner_inner'" },
|
||||
"z_seam_type": { "value": "'sharpest_corner'" }
|
||||
}
|
||||
}
|
||||
136
resources/definitions/Geeetech_Base_Single_Extruder.def.json
Normal file
136
resources/definitions/Geeetech_Base_Single_Extruder.def.json
Normal file
|
|
@ -0,0 +1,136 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech Base Single Extruder Printer",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata":
|
||||
{
|
||||
"visible": false,
|
||||
"author": "Teddy.Hu",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"first_start_actions": [ "MachineSettingsAction" ],
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"has_variants": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" },
|
||||
"preferred_material": "generic_pla",
|
||||
"preferred_quality_type": "standard",
|
||||
"preferred_variant_name": "0.4mm Nozzle",
|
||||
"quality_definition": "Geeetech_Base_Single_Extruder",
|
||||
"variants_name": "Nozzle Size"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_print": { "value": 500 },
|
||||
"acceleration_travel": { "value": 500 },
|
||||
"acceleration_travel_layer_0": { "value": "acceleration_travel" },
|
||||
"adhesion_type": { "value": "'skirt'" },
|
||||
"brim_replaces_support": { "value": false },
|
||||
"cool_min_layer_time": { "value": "1.3 if speed_infill>=200 else 5" },
|
||||
"gantry_height": { "value": 40 },
|
||||
"infill_pattern": { "value": "'lines' if infill_sparse_density > 50 else 'grid'" },
|
||||
"line_width": { "value": "1.125*machine_nozzle_size if speed_infill<=100 else machine_nozzle_size" },
|
||||
"machine_acceleration": { "value": 500 },
|
||||
"machine_depth": { "default_value": 350 },
|
||||
"machine_end_gcode": { "default_value": ";Geeetech Custom end G-code\nG91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers\n\n\n" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-40, 40],
|
||||
[40, 40],
|
||||
[40, -40],
|
||||
[-40, -40]
|
||||
]
|
||||
},
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_height": { "default_value": 350 },
|
||||
"machine_max_acceleration_e": { "value": 1000 },
|
||||
"machine_max_acceleration_x": { "value": 500 },
|
||||
"machine_max_acceleration_y": { "value": 500 },
|
||||
"machine_max_acceleration_z": { "value": 111 },
|
||||
"machine_max_feedrate_e": { "value": 40 },
|
||||
"machine_max_feedrate_x": { "value": 500 },
|
||||
"machine_max_feedrate_y": { "value": 500 },
|
||||
"machine_max_feedrate_z": { "value": 10 },
|
||||
"machine_max_jerk_e": { "value": 4.9 },
|
||||
"machine_max_jerk_xy": { "value": 10 },
|
||||
"machine_max_jerk_z": { "value": 0.3 },
|
||||
"machine_name": { "default_value": "Geeetech Base Single Extruder Printer" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech Custom Start G-code\nM104 S{material_print_temperature_layer_0} ;Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ;Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ;Wait for Hotend Temperature\nG92 E0 ;Reset Extruder\nG28 ;Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ;ON Light\n;M106 P0 S383 ;ON MainFan 150% if need\n;M106 P1 S255 ;ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ;Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ;Draw the first line\nG92 E0 ;Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ;Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ;Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 350 },
|
||||
"material_bed_temperature": { "maximum_value_warning": 110 },
|
||||
"material_final_print_temperature": { "value": "material_print_temperature" },
|
||||
"material_initial_print_temperature":
|
||||
{
|
||||
"minimum_value_warning": "material_standby_temperature - 10",
|
||||
"value": "material_print_temperature - 5"
|
||||
},
|
||||
"material_print_temperature":
|
||||
{
|
||||
"maximum_value": "250",
|
||||
"value": "200 if speed_infill <=100 else 210 if speed_infill <= 150 else 220 if speed_infill <= 180 else 230"
|
||||
},
|
||||
"material_print_temperature_layer_0":
|
||||
{
|
||||
"maximum_value_warning": 250,
|
||||
"value": "material_print_temperature + 5"
|
||||
},
|
||||
"minimum_interface_area": { "value": 10 },
|
||||
"minimum_support_area": { "value": 2 },
|
||||
"optimize_wall_printing_order": { "value": true },
|
||||
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'all'" },
|
||||
"retraction_combing_max_distance": { "value": 30 },
|
||||
"retraction_hop": { "value": 0.5 },
|
||||
"retraction_speed": { "value": 40 },
|
||||
"skirt_brim_speed":
|
||||
{
|
||||
"maximum_value_warning": "60",
|
||||
"value": "speed_print_layer_0"
|
||||
},
|
||||
"skirt_gap": { "value": 6 },
|
||||
"small_hole_max_size": { "value": "5 if speed_infill>=150 else 0" },
|
||||
"speed_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "100",
|
||||
"value": "50 if speed_infill <= 150 else 75"
|
||||
},
|
||||
"speed_print_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "60",
|
||||
"value": "25 if speed_infill <= 150 else 35"
|
||||
},
|
||||
"speed_support": { "value": "speed_print*0.5" },
|
||||
"speed_support_bottom": { "value": "speed_support_roof" },
|
||||
"speed_support_interface": { "value": "speed_support / 0.8" },
|
||||
"speed_support_roof": { "value": "speed_support_interface / 2" },
|
||||
"speed_topbottom": { "value": "speed_print" },
|
||||
"speed_travel": { "value": "200 if 120<=speed_print<=200 else speed_print if speed_print>200 else 120" },
|
||||
"speed_travel_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "150",
|
||||
"value": "speed_layer_0"
|
||||
},
|
||||
"speed_wall": { "value": "60 if speed_print==60 else math.ceil(round(speed_print*0.90))" },
|
||||
"speed_wall_0": { "value": "30 if speed_print==60 else math.ceil(round(speed_print*0.75))" },
|
||||
"speed_wall_x": { "value": "60 if speed_print==60 else math.ceil(round(speed_print*0.90))" },
|
||||
"support_brim_enable": { "value": true },
|
||||
"support_brim_width": { "value": 5 },
|
||||
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
||||
"support_interface_density": { "value": 33.333 },
|
||||
"support_interface_height": { "value": "layer_height * 3" },
|
||||
"support_interface_pattern": { "value": "zigzag" },
|
||||
"support_interface_skip_height": { "value": 0.2 },
|
||||
"support_pattern": { "value": "'zigzag'" },
|
||||
"support_use_towers": { "value": false },
|
||||
"support_wall_count": { "value": 0 },
|
||||
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
||||
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
||||
"support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
|
||||
"top_bottom_thickness": { "value": "layer_height_0 + layer_height * 3" },
|
||||
"travel_avoid_supports": { "value": true },
|
||||
"wall_thickness": { "value": "line_width * 2" },
|
||||
"wall_transition_filter_deviation": { "value": 0.15 },
|
||||
"z_seam_corner": { "value": "'z_seam_corner_inner'" },
|
||||
"z_seam_type": { "value": "'sharpest_corner'" }
|
||||
}
|
||||
}
|
||||
|
|
@ -131,3 +131,100 @@
|
|||
"small_hole_max_size": { "value": 10 }
|
||||
}
|
||||
}
|
||||
=======
|
||||
"version": 2,
|
||||
"name": "AnkerMake M5",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "just-trey",
|
||||
"manufacturer": "AnkerMake",
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "ankermake_m5_platform.obj",
|
||||
"has_machine_quality": true,
|
||||
"machine_extruder_trains": { "0": "ankermake_m5_extruder_0" },
|
||||
"platform_texture": "ankermake_m5.png",
|
||||
"preferred_material": "generic_pla",
|
||||
"preferred_quality_type": "normal"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_print": { "value": "2500" },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"cool_min_layer_time": { "value": 6 },
|
||||
"cool_min_speed": { "value": 30 },
|
||||
"gantry_height": { "value": 25 },
|
||||
"hole_xy_offset": { "value": 0.2 },
|
||||
"infill_pattern": { "value": "'lines' if infill_sparse_density >= 25 else 'grid'" },
|
||||
"infill_sparse_density": { "value": 25 },
|
||||
"machine_depth": { "default_value": 235 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_height": { "default_value": 250 },
|
||||
"machine_name": { "default_value": "AnkerMake M5" },
|
||||
"machine_start_gcode": { "default_value": "M104 S{material_print_temperature_layer_0} ; set final nozzle temp\nM190 S{material_bed_temperature_layer_0} ; set and wait for nozzle temp to stabilize\nM109 S{material_print_temperature_layer_0} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)" },
|
||||
"machine_width": { "default_value": 235 },
|
||||
"material_bed_temperature": { "maximum_value_warning": "110" },
|
||||
"material_bed_temperature_layer_0": { "maximum_value_warning": "110" },
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
"material_final_print_temperature": { "value": "material_print_temperature" },
|
||||
"material_flow_layer_0": { "value": 115 },
|
||||
"material_initial_print_temperature": { "value": "material_print_temperature" },
|
||||
"material_print_temperature": { "maximum_value_warning": "260" },
|
||||
"material_print_temperature_layer_0":
|
||||
{
|
||||
"maximum_value_warning": "270",
|
||||
"value": "material_print_temperature + 5"
|
||||
},
|
||||
"minimum_interface_area": { "value": 10 },
|
||||
"minimum_support_area": { "value": 2 },
|
||||
"retraction_amount": { "default_value": 1.5 },
|
||||
"retraction_combing": { "value": "'off' if retraction_hop_enabled else 'infill'" },
|
||||
"retraction_hop": { "value": 0.2 },
|
||||
"retraction_speed": { "default_value": 60 },
|
||||
"skin_material_flow": { "value": 97 },
|
||||
"skin_monotonic": { "default_value": true },
|
||||
"skirt_line_count": { "value": 3 },
|
||||
"small_hole_max_size": { "value": 10 },
|
||||
"speed_infill": { "maximum_value_warning": 255 },
|
||||
"speed_print":
|
||||
{
|
||||
"maximum_value_warning": 255,
|
||||
"value": 250.0
|
||||
},
|
||||
"speed_support": { "maximum_value_warning": 255 },
|
||||
"speed_support_bottom": { "maximum_value_warning": 255 },
|
||||
"speed_support_infill": { "maximum_value_warning": 255 },
|
||||
"speed_support_interface": { "maximum_value_warning": 255 },
|
||||
"speed_support_roof": { "maximum_value_warning": 255 },
|
||||
"speed_topbottom": { "value": 150.0 },
|
||||
"speed_travel": { "value": 250.0 },
|
||||
"speed_wall":
|
||||
{
|
||||
"maximum_value_warning": 255,
|
||||
"value": 150.0
|
||||
},
|
||||
"speed_wall_x":
|
||||
{
|
||||
"maximum_value_warning": 255,
|
||||
"value": 250.0
|
||||
},
|
||||
"support_angle": { "value": "math.floor(math.degrees(math.atan(line_width / 2.0 /layer_height)))" },
|
||||
"support_brim_width": { "value": 4.0 },
|
||||
"support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
|
||||
"support_interface_density": { "value": 33.333 },
|
||||
"support_interface_enable": { "value": true },
|
||||
"support_interface_pattern": { "value": "'grid'" },
|
||||
"support_interface_skip_height": { "value": 0.2 },
|
||||
"support_roof_enable": { "value": true },
|
||||
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
|
||||
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
|
||||
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
|
||||
"support_z_distance": { "value": "layer_height * 2" },
|
||||
"top_bottom_thickness": { "value": "layer_height * 4" },
|
||||
"wall_overhang_angle": { "value": 55 },
|
||||
"wall_overhang_speed_factor": { "value": 55 },
|
||||
"xy_offset_layer_0": { "value": -0.2 },
|
||||
"zig_zaggify_infill": { "value": "infill_pattern == 'cross' or infill_pattern == 'cross_3d' or infill_pattern == 'lines'" }
|
||||
}
|
||||
}
|
||||
|
|
@ -27,6 +27,8 @@
|
|||
"machine_height": { "default_value": 165 },
|
||||
"machine_name": { "default_value": "Creality Sermoon V1" },
|
||||
"machine_start_gcode": { "default_value": "; -- START GCODE --\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y170.0 Z0.28 F1500.0 E12 ;Draw the first line\nG1 X10.4 Y170.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E25 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up" },
|
||||
"machine_width": { "default_value": 175 }
|
||||
"machine_width": { "default_value": 175 },
|
||||
"retraction_amount": { "value": 0.8 },
|
||||
"retraction_speed": { "default_value": 40 }
|
||||
}
|
||||
}
|
||||
38
resources/definitions/fablabbcn_pasteprinter.def.json
Normal file
38
resources/definitions/fablabbcn_pasteprinter.def.json
Normal file
|
|
@ -0,0 +1,38 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "PastePrinter",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "eduardo_chamorro",
|
||||
"manufacturer": "FablabBcn",
|
||||
"file_formats": "text/x-gcode",
|
||||
"first_start_actions": [ "MachineSettingsAction" ],
|
||||
"machine_extruder_trains": { "0": "fablabbcn_0" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"layer_height": { "default_value": 1.5 },
|
||||
"layer_height_0": { "default_value": 1.5 },
|
||||
"machine_always_write_active_tool": { "default_value": true },
|
||||
"machine_depth": { "default_value": 235 },
|
||||
"machine_end_gcode": { "default_value": ";FOOTER\nG91; relative positioning\nM107; turn off layer fan\nG1 Z50 F1000\nM400;Wait finish move\nG90; absolute positioning\nG1 X235 Y235\n;ENDFOOTER" },
|
||||
"machine_height": { "default_value": 235 },
|
||||
"machine_max_jerk_e": { "default_value": 50.0 },
|
||||
"machine_max_jerk_xy": { "default_value": 50.0 },
|
||||
"machine_max_jerk_z": { "default_value": 50.0 },
|
||||
"machine_nozzle_size": { "settable_per_extruder": false },
|
||||
"machine_start_gcode": { "default_value": ";HEADER;\nG21; Set to metric [change to G20 if you want Imperial]\nG91;Force coordinates to be absolute relative to the origin \nG1 Z10 F1000;\nG90; Force coordinates to be absolute relative to the origin\nG28 X; Home X axis\nG28 Y; Home Y axis\nG28 Z; Home Z axis\nM302 P1; Disable Cold Extrusion Checking\nG92 E0; Reset extruder to [0] zero end of cleaning run\nG91; Force coordinates to be absolute relative to the origin\nG1 Z10 F1000;\nG90;\nT0;\nM117 Printing...;ENDHEADER" },
|
||||
"machine_width": { "default_value": 235 },
|
||||
"material_bed_temp_prepend": { "default_value": false },
|
||||
"material_bed_temp_wait": { "default_value": false },
|
||||
"material_diameter": { "default_value": 1.75 },
|
||||
"material_print_temp_prepend": { "default_value": false },
|
||||
"material_print_temp_wait": { "default_value": false },
|
||||
"retraction_enable": { "default_value": false },
|
||||
"speed_print": { "default_value": 15 },
|
||||
"top_bottom_pattern": { "default_value": "concentric" }
|
||||
}
|
||||
}
|
||||
|
|
@ -8161,6 +8161,7 @@
|
|||
"small_feature_max_length":
|
||||
{
|
||||
"label": "Small Feature Max Length",
|
||||
"enabled": "small_hole_max_size > 0",
|
||||
"description": "Feature outlines that are shorter than this length will be printed using Small Feature Speed.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
|
|
@ -8174,6 +8175,7 @@
|
|||
"small_feature_speed_factor":
|
||||
{
|
||||
"label": "Small Feature Speed",
|
||||
"enabled": "small_hole_max_size > 0",
|
||||
"description": "Small features will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy.",
|
||||
"unit": "%",
|
||||
"type": "float",
|
||||
|
|
@ -8186,6 +8188,7 @@
|
|||
"small_feature_speed_factor_0":
|
||||
{
|
||||
"label": "Small Feature Initial Layer Speed",
|
||||
"enabled": "small_hole_max_size > 0",
|
||||
"description": "Small features on the first layer will be printed at this percentage of their normal print speed. Slower printing can help with adhesion and accuracy.",
|
||||
"unit": "%",
|
||||
"type": "float",
|
||||
|
|
|
|||
|
|
@ -1,59 +0,0 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A10",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Amit L",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "geeetech_A10_1"
|
||||
}
|
||||
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Geeetech A10" },
|
||||
"machine_width": {
|
||||
"default_value": 220
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 260
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 220
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"layer_height": { "default_value": 0.1 },
|
||||
"layer_height_0": { "default_value": 0.15 },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_speed": { "default_value": 35 },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] },
|
||||
"gantry_height": { "value": "28" },
|
||||
"machine_max_feedrate_z": { "default_value": 12 },
|
||||
"machine_max_feedrate_e": { "default_value": 120 },
|
||||
"machine_max_acceleration_z": { "default_value": 500 },
|
||||
"machine_acceleration": { "default_value": 1000 },
|
||||
"machine_max_jerk_xy": { "default_value": 10 },
|
||||
"machine_max_jerk_z": { "default_value": 0.2 },
|
||||
"machine_max_jerk_e": { "default_value": 2.5 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28 ; Auto home\nG1 Z15 F300 ;Move up slightly\nM107 ;Off fans\nG90 ;Switch to absolute positioning\nM82 ;Extruder absolute mode\nG92 E0 ;Set position of extruder to 0\nG0 X10 Y20 F1500 ;Move to X10 Y20 at 1500mms\nG1 Z0.8 ;Move Z to 0.8\nG1 F300 X180 E40 ;Extrude a line of filament\nG1 F1200 Z2 ;Raise Z\nG92 E0 ;Set extruder position to zero\nG28 ;Auto home"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "G91 ;Switch to relative positioning\nG1 E-1 ;Retract filament to lower pressure\nG0 X0 Y200 ;Move hotend to left and bed forward\nM104 S0 ;Cooldown hotend\nG90 ;Switch to absolute mode\nG92 E0 ;Set extruder to zero\nM140 S0 ;Cooldown bed\nM84 ; Disable steppers"
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 1
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
|
|
@ -1,58 +1,37 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A10M",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Amit L",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "geeetech_A10M_1",
|
||||
"1": "geeetech_A10M_2"
|
||||
}
|
||||
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Geeetech A10M" },
|
||||
"machine_width": {
|
||||
"default_value": 220
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 260
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 220
|
||||
}, "machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"layer_height": { "default_value": 0.1 },
|
||||
"layer_height_0": { "default_value": 0.15 },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_speed": { "default_value": 35 },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] },
|
||||
"gantry_height": { "value": "28" },
|
||||
"machine_max_feedrate_z": { "default_value": 12 },
|
||||
"machine_max_feedrate_e": { "default_value": 120 },
|
||||
"machine_max_acceleration_z": { "default_value": 500 },
|
||||
"machine_acceleration": { "default_value": 1000 },
|
||||
"machine_max_jerk_xy": { "default_value": 10 },
|
||||
"machine_max_jerk_z": { "default_value": 0.2 },
|
||||
"machine_max_jerk_e": { "default_value": 2.5 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": ";GeeeTech A10M start script\nG28 ;home\nG90 ;absolute positioning\nG1 X0 Y0 Z15 E0 F300 ;go to wait position\nM140 S{material_bed_temperature_layer_0} ;set bed temp\nM109 S{material_print_temperature_layer_0} ;set extruder temp and wait\nG1 Z0.8 F200 ;set extruder height\nG1 X220 Y0 E80 F1000 ;purge line\n;end of start script"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "G91\nG1 E-1\nG0 X0 Y200\nM104 S0\nG90\nG92 E0\nM140 S0\nM84\nM104 S0\nM140 S0\nM84"
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 2
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A10M",
|
||||
"inherits": "Geeetech_Base_Dual_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "Geeetech_Dual_Extruder_0",
|
||||
"1": "Geeetech_Dual_Extruder_1"
|
||||
},
|
||||
"preferred_material": "Geeetech_PLA_Cyan"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"brim_width": { "value": 10 },
|
||||
"gantry_height": { "value": 28 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 260 },
|
||||
"machine_name": { "default_value": "Geeetech A10M" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech A10M Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 220 },
|
||||
"prime_tower_position_x": { "value": 190 },
|
||||
"prime_tower_position_y": { "value": 160 }
|
||||
}
|
||||
}
|
||||
29
resources/definitions/geeetech_A10Pro.def.json
Normal file
29
resources/definitions/geeetech_A10Pro.def.json
Normal file
|
|
@ -0,0 +1,29 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A10Pro",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 28 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 260 },
|
||||
"machine_name": { "default_value": "Geeetech A10Pro" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech A10Pro Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 220 }
|
||||
}
|
||||
}
|
||||
|
|
@ -1,60 +1,38 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A10T",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Amit L",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "geeetech_A10T_1",
|
||||
"1": "geeetech_A10T_2",
|
||||
"2": "geeetech_A10T_3"
|
||||
}
|
||||
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Geeetech A10T" },
|
||||
"machine_width": {
|
||||
"default_value": 220
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 220
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 260
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"layer_height": { "default_value": 0.1 },
|
||||
"layer_height_0": { "default_value": 0.15 },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_speed": { "default_value": 35 },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] },
|
||||
"gantry_height": { "value": "28" },
|
||||
"machine_max_feedrate_z": { "default_value": 12 },
|
||||
"machine_max_feedrate_e": { "default_value": 120 },
|
||||
"machine_max_acceleration_z": { "default_value": 500 },
|
||||
"machine_acceleration": { "default_value": 1000 },
|
||||
"machine_max_jerk_xy": { "default_value": 10 },
|
||||
"machine_max_jerk_z": { "default_value": 0.2 },
|
||||
"machine_max_jerk_e": { "default_value": 2.5 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28 \nG1 Z15 F300\nM107\nG90\nM82\nM104 S215\nM140 S55\nG92 E0\nM109 S215\nM107\nM163 S0 P0.33\nM163 S1 P0.33\nM163 S2 P0.33\nM164 S4\nG0 X10 Y20 F6000\nG1 Z0.8\nG1 F300 X180 E40\nG1 F1200 Z2\nG92 E0\nG28"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "G91\nG1 E-1\nG0 X0 Y200\nM104 S0\nG90\nG92 E0\nM140 S0\nM84\nM104 S0\nM140 S0\nM84"
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 3
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A10T",
|
||||
"inherits": "Geeetech_Base_Multi_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "Geeetech_Multi_Extruder_0",
|
||||
"1": "Geeetech_Multi_Extruder_1",
|
||||
"2": "Geeetech_Multi_Extruder_2"
|
||||
},
|
||||
"preferred_material": "Geeetech_PLA_Magenta"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"brim_width": { "value": 10 },
|
||||
"gantry_height": { "value": 28 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 260 },
|
||||
"machine_name": { "default_value": "Geeetech A10T" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech A10T Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 220 },
|
||||
"prime_tower_position_x": { "value": 190 },
|
||||
"prime_tower_position_y": { "value": 160 }
|
||||
}
|
||||
}
|
||||
|
|
@ -1,57 +1,29 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A20",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Amit L",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "geeetech_A20_1"
|
||||
}
|
||||
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Geeetech A20" },
|
||||
"machine_width": {
|
||||
"default_value": 250
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 250
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 250
|
||||
}, "machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"layer_height": { "default_value": 0.1 },
|
||||
"layer_height_0": { "default_value": 0.15 },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_speed": { "default_value": 35 },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] },
|
||||
"gantry_height": { "value": "28" },
|
||||
"machine_max_feedrate_z": { "default_value": 12 },
|
||||
"machine_max_feedrate_e": { "default_value": 120 },
|
||||
"machine_max_acceleration_z": { "default_value": 500 },
|
||||
"machine_acceleration": { "default_value": 1000 },
|
||||
"machine_max_jerk_xy": { "default_value": 10 },
|
||||
"machine_max_jerk_z": { "default_value": 0.2 },
|
||||
"machine_max_jerk_e": { "default_value": 2.5 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28 \nG1 Z15 F300\nM107\nG90\nM82\nM104 S215\nM140 S55\nG92 E0\nM109 S215\nM107\nG0 X10 Y20 F6000\nG1 Z0.8\nG1 F300 X200 E40\nG1 F1200 Z2\nG92 E0\nG28"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "G91\nG1 E-1\nG0 X0 Y200\nM104 S0\nG90\nG92 E0\nM140 S0\nM84\nM104 S0\nM140 S0\nM84"
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 1
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A20",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 250 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 250 },
|
||||
"machine_name": { "default_value": "Geeetech A20" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech A20 Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 250 }
|
||||
}
|
||||
}
|
||||
|
|
@ -1,58 +1,37 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A20M",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Amit L",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "geeetech_A20M_1",
|
||||
"1": "geeetech_A20M_2"
|
||||
}
|
||||
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Geeetech A20M" },
|
||||
"machine_width": {
|
||||
"default_value": 250
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 250
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 250
|
||||
}, "machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"layer_height": { "default_value": 0.1 },
|
||||
"layer_height_0": { "default_value": 0.15 },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_speed": { "default_value": 35 },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] },
|
||||
"gantry_height": { "value": "28" },
|
||||
"machine_max_feedrate_z": { "default_value": 12 },
|
||||
"machine_max_feedrate_e": { "default_value": 120 },
|
||||
"machine_max_acceleration_z": { "default_value": 500 },
|
||||
"machine_acceleration": { "default_value": 1000 },
|
||||
"machine_max_jerk_xy": { "default_value": 10 },
|
||||
"machine_max_jerk_z": { "default_value": 0.2 },
|
||||
"machine_max_jerk_e": { "default_value": 2.5 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": ";GeeeTech A20M start script\nG28 ;home\nG90 ;absolute positioning\nG1 X0 Y0 Z15 E0 F300 ;go to wait position\nM140 S{material_bed_temperature_layer_0} ;set bed temp\nM109 S{material_print_temperature_layer_0} ;set extruder temp and wait\nG1 Z0.8 F200 ;set extruder height\nG1 X220 Y0 E80 F1000 ;purge line\n;end of start script"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "G91\nG1 E-1\nG0 X0 Y200\nM104 S0\nG90\nG92 E0\nM140 S0\nM84\nM104 S0\nM140 S0\nM84"
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 2
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A20M",
|
||||
"inherits": "Geeetech_Base_Dual_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "Geeetech_Dual_Extruder_0",
|
||||
"1": "Geeetech_Dual_Extruder_1"
|
||||
},
|
||||
"preferred_material": "Geeetech_PLA_Yellow"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"brim_width": { "value": 10 },
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 250 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 250 },
|
||||
"machine_name": { "default_value": "Geeetech A20M" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech A20M Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 250 },
|
||||
"prime_tower_position_x": { "value": 220 },
|
||||
"prime_tower_position_y": { "value": 190 }
|
||||
}
|
||||
}
|
||||
|
|
@ -1,59 +1,38 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A20T",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Amit L",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "geeetech_A20T_1",
|
||||
"1": "geeetech_A20T_2",
|
||||
"2": "geeetech_A20T_3"
|
||||
}
|
||||
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Geeetech A20T" },
|
||||
"machine_width": {
|
||||
"default_value": 250
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 250
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 250
|
||||
}, "machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"layer_height": { "default_value": 0.1 },
|
||||
"layer_height_0": { "default_value": 0.15 },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_speed": { "default_value": 35 },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] },
|
||||
"gantry_height": { "value": "28" },
|
||||
"machine_max_feedrate_z": { "default_value": 12 },
|
||||
"machine_max_feedrate_e": { "default_value": 120 },
|
||||
"machine_max_acceleration_z": { "default_value": 500 },
|
||||
"machine_acceleration": { "default_value": 1000 },
|
||||
"machine_max_jerk_xy": { "default_value": 10 },
|
||||
"machine_max_jerk_z": { "default_value": 0.2 },
|
||||
"machine_max_jerk_e": { "default_value": 2.5 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28 \nG1 Z15 F300\nM107\nG90\nM82\nM104 S215\nM140 S55\nG92 E0\nM109 S215\nM107\nM163 S0 P0.33\nM163 S1 P0.33\nM163 S2 P0.33\nM164 S4\nG0 X10 Y20 F6000\nG1 Z0.8\nG1 F300 X200 E40\nG1 F1200 Z2\nG92 E0\nG28"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "G91\nG1 E-1\nG0 X0 Y200\nM104 S0\nG90\nG92 E0\nM140 S0\nM84\nM104 S0\nM140 S0\nM84"
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 3
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A20T",
|
||||
"inherits": "Geeetech_Base_Multi_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "Geeetech_Multi_Extruder_0",
|
||||
"1": "Geeetech_Multi_Extruder_1",
|
||||
"2": "Geeetech_Multi_Extruder_2"
|
||||
},
|
||||
"preferred_material": "Geeetech_PLA_Red"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"brim_width": { "value": 10 },
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 250 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 250 },
|
||||
"machine_name": { "default_value": "Geeetech A20T" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech A20T Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 250 },
|
||||
"prime_tower_position_x": { "value": 220 },
|
||||
"prime_tower_position_y": { "value": 190 }
|
||||
}
|
||||
}
|
||||
37
resources/definitions/geeetech_A30M.def.json
Normal file
37
resources/definitions/geeetech_A30M.def.json
Normal file
|
|
@ -0,0 +1,37 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A30M",
|
||||
"inherits": "Geeetech_Base_Dual_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "Geeetech_Dual_Extruder_0",
|
||||
"1": "Geeetech_Dual_Extruder_1"
|
||||
},
|
||||
"preferred_material": "Geeetech_PLA_Green"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"brim_width": { "value": 10 },
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 320 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 420 },
|
||||
"machine_name": { "default_value": "Geeetech A30M" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech A30M Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 320 },
|
||||
"prime_tower_position_x": { "value": 290 },
|
||||
"prime_tower_position_y": { "value": 260 }
|
||||
}
|
||||
}
|
||||
29
resources/definitions/geeetech_A30Pro.def.json
Normal file
29
resources/definitions/geeetech_A30Pro.def.json
Normal file
|
|
@ -0,0 +1,29 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A30Pro",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 320 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 420 },
|
||||
"machine_name": { "default_value": "Geeetech A30Pro" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech A30Pro Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 320 }
|
||||
}
|
||||
}
|
||||
38
resources/definitions/geeetech_A30T.def.json
Normal file
38
resources/definitions/geeetech_A30T.def.json
Normal file
|
|
@ -0,0 +1,38 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A30T",
|
||||
"inherits": "Geeetech_Base_Multi_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "Geeetech_Multi_Extruder_0",
|
||||
"1": "Geeetech_Multi_Extruder_1",
|
||||
"2": "Geeetech_Multi_Extruder_2"
|
||||
},
|
||||
"preferred_material": "Geeetech_PLA_Blue"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"brim_width": { "value": 10 },
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 320 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 420 },
|
||||
"machine_name": { "default_value": "Geeetech A30T" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech A30T Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 320 },
|
||||
"prime_tower_position_x": { "value": 290 },
|
||||
"prime_tower_position_y": { "value": 260 }
|
||||
}
|
||||
}
|
||||
30
resources/definitions/geeetech_E180.def.json
Normal file
30
resources/definitions/geeetech_E180.def.json
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech E180",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 28 },
|
||||
"machine_depth": { "default_value": 130 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_heated_bed": { "default_value": false },
|
||||
"machine_height": { "default_value": 126 },
|
||||
"machine_name": { "default_value": "Geeetech E180" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech E180 Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y10 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y120.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y120.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y10 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y10 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 125 }
|
||||
}
|
||||
}
|
||||
30
resources/definitions/geeetech_GiantArmD200.def.json
Normal file
30
resources/definitions/geeetech_GiantArmD200.def.json
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech GiantArmD200",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 45 },
|
||||
"machine_depth": { "default_value": 180 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-1.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 180 },
|
||||
"machine_name": { "default_value": "Geeetech GiantArmD200" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech GiantArmD200 Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y10 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y160.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y160.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y10 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y10 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 300 },
|
||||
"retraction_amount": { "value": 2 }
|
||||
}
|
||||
}
|
||||
30
resources/definitions/geeetech_I3ProB.def.json
Normal file
30
resources/definitions/geeetech_I3ProB.def.json
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech I3ProB",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 45 },
|
||||
"machine_depth": { "default_value": 200 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-1.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 180 },
|
||||
"machine_name": { "default_value": "Geeetech I3ProB" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech I3ProB Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y10 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y180.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y180.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y10 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 200 },
|
||||
"retraction_amount": { "value": 2 }
|
||||
}
|
||||
}
|
||||
38
resources/definitions/geeetech_I3ProC.def.json
Normal file
38
resources/definitions/geeetech_I3ProC.def.json
Normal file
|
|
@ -0,0 +1,38 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech I3ProC",
|
||||
"inherits": "Geeetech_Base_Dual_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "Geeetech_Dual_Extruder_0",
|
||||
"1": "Geeetech_Dual_Extruder_1"
|
||||
},
|
||||
"preferred_material": "Geeetech_PLA_Black"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"brim_width": { "value": 10 },
|
||||
"gantry_height": { "value": 45 },
|
||||
"machine_depth": { "default_value": 200 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-1.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 180 },
|
||||
"machine_name": { "default_value": "Geeetech I3ProC" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech I3ProC Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y10 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y180.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y180.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y10 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 200 },
|
||||
"prime_tower_position_x": { "value": 170 },
|
||||
"prime_tower_position_y": { "value": 140 },
|
||||
"retraction_amount": { "value": 2 }
|
||||
}
|
||||
}
|
||||
30
resources/definitions/geeetech_I3ProW.def.json
Normal file
30
resources/definitions/geeetech_I3ProW.def.json
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech I3ProW",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 45 },
|
||||
"machine_depth": { "default_value": 200 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-1.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 180 },
|
||||
"machine_name": { "default_value": "Geeetech I3ProW" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech I3ProW Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y10 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y180.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y180.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y10 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 200 },
|
||||
"retraction_amount": { "value": 2 }
|
||||
}
|
||||
}
|
||||
30
resources/definitions/geeetech_MeCreator.def.json
Normal file
30
resources/definitions/geeetech_MeCreator.def.json
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech MeCreator",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 45 },
|
||||
"machine_depth": { "default_value": 150 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-1.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 125 },
|
||||
"machine_name": { "default_value": "Geeetech MeCreator" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech MeCreator Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y10 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y130.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y130.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y10 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y10 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 150 },
|
||||
"retraction_amount": { "value": 2 }
|
||||
}
|
||||
}
|
||||
30
resources/definitions/geeetech_MeCreator2.def.json
Normal file
30
resources/definitions/geeetech_MeCreator2.def.json
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech MeCreator2",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 45 },
|
||||
"machine_depth": { "default_value": 160 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-1.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 160 },
|
||||
"machine_name": { "default_value": "Geeetech MeCreator2" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech MeCreator2 Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y10 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y140.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y140.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y10 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y10 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 160 },
|
||||
"retraction_amount": { "value": 2 }
|
||||
}
|
||||
}
|
||||
30
resources/definitions/geeetech_MeDucer.def.json
Normal file
30
resources/definitions/geeetech_MeDucer.def.json
Normal file
|
|
@ -0,0 +1,30 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech MeDucer",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 45 },
|
||||
"machine_depth": { "default_value": 150 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-1.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 150 },
|
||||
"machine_name": { "default_value": "Geeetech MeDucer" },
|
||||
"machine_start_gcode": { "default_value": ";Geeetech MeDucer Custom Start G-code\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y10 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y130.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y130.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y10 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y10 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 180 },
|
||||
"retraction_amount": { "value": 2 }
|
||||
}
|
||||
}
|
||||
29
resources/definitions/geeetech_Mizar.def.json
Normal file
29
resources/definitions/geeetech_Mizar.def.json
Normal file
|
|
@ -0,0 +1,29 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech Mizar",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 260 },
|
||||
"machine_name": { "default_value": "Geeetech Mizar" },
|
||||
"machine_start_gcode": { "default_value": ";Official open-source firmware for Mizar: https://github.com/Geeetech3D/Mizar \n\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 220 }
|
||||
}
|
||||
}
|
||||
38
resources/definitions/geeetech_MizarM.def.json
Normal file
38
resources/definitions/geeetech_MizarM.def.json
Normal file
|
|
@ -0,0 +1,38 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech MizarM",
|
||||
"inherits": "Geeetech_Base_Dual_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "Geeetech_Dual_Extruder_0",
|
||||
"1": "Geeetech_Dual_Extruder_1"
|
||||
},
|
||||
"preferred_material": "Geeetech_PLA_Magenta"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"brim_width": { "value": 10 },
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 255 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 260 },
|
||||
"machine_name": { "default_value": "Geeetech MizarM" },
|
||||
"machine_start_gcode": { "default_value": ";Official open-source firmware for MizarM: https://github.com/Geeetech3D/Mizar-M \n\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 255 },
|
||||
"material_standby_temperature": { "value": 200 },
|
||||
"prime_tower_position_x": { "value": 225 },
|
||||
"prime_tower_position_y": { "value": 195 }
|
||||
}
|
||||
}
|
||||
29
resources/definitions/geeetech_MizarMax.def.json
Normal file
29
resources/definitions/geeetech_MizarMax.def.json
Normal file
|
|
@ -0,0 +1,29 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech MizarMax",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 320 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 400 },
|
||||
"machine_name": { "default_value": "Geeetech MizarMax" },
|
||||
"machine_start_gcode": { "default_value": ";Official open-source firmware for MizarMax: https://github.com/Geeetech3D/Mizar-Max \n\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 320 }
|
||||
}
|
||||
}
|
||||
29
resources/definitions/geeetech_MizarPro.def.json
Normal file
29
resources/definitions/geeetech_MizarPro.def.json
Normal file
|
|
@ -0,0 +1,29 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech MizarPro",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 260 },
|
||||
"machine_name": { "default_value": "Geeetech MizarPro" },
|
||||
"machine_start_gcode": { "default_value": ";Official open-source firmware for MizarPro: https://github.com/Geeetech3D/Mizar-Pro \n\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 220 }
|
||||
}
|
||||
}
|
||||
29
resources/definitions/geeetech_MizarS.def.json
Normal file
29
resources/definitions/geeetech_MizarS.def.json
Normal file
|
|
@ -0,0 +1,29 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech MizarS",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": 35 },
|
||||
"machine_depth": { "default_value": 255 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-31, 31],
|
||||
[34, 31],
|
||||
[34, -40],
|
||||
[-31, -40]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 260 },
|
||||
"machine_name": { "default_value": "Geeetech MizarS" },
|
||||
"machine_start_gcode": { "default_value": ";Official open-source firmware for MizarS: https://github.com/Geeetech3D/Mizar-S \n\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 255 }
|
||||
}
|
||||
}
|
||||
|
|
@ -1,59 +0,0 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech Mizar_S",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"visible": true,
|
||||
"author": "Amit L",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "geeetech_Mizar_S_1"
|
||||
}
|
||||
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Geeetech Mizar_S" },
|
||||
"machine_width": {
|
||||
"default_value": 255
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 260
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 255
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"layer_height": { "default_value": 0.1 },
|
||||
"layer_height_0": { "default_value": 0.15 },
|
||||
"retraction_amount": { "default_value": 0.8 },
|
||||
"retraction_speed": { "default_value": 35 },
|
||||
"adhesion_type": { "default_value": "skirt" },
|
||||
"machine_head_with_fans_polygon": { "default_value": [[-31,31],[34,31],[34,-40],[-31,-40]] },
|
||||
"gantry_height": { "value": "28" },
|
||||
"machine_max_feedrate_z": { "default_value": 12 },
|
||||
"machine_max_feedrate_e": { "default_value": 120 },
|
||||
"machine_max_acceleration_z": { "default_value": 500 },
|
||||
"machine_acceleration": { "default_value": 1000 },
|
||||
"machine_max_jerk_xy": { "default_value": 10 },
|
||||
"machine_max_jerk_z": { "default_value": 0.2 },
|
||||
"machine_max_jerk_e": { "default_value": 2.5 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28 ; Auto home\nG1 Z15 F300 ;Move up slightly\nM107 ;Off fans\nG90 ;Switch to absolute positioning\nM82 ;Extruder absolute mode\nG92 E0 ;Set position of extruder to 0\nG0 X10 Y20 F1500 ;Move to X10 Y20 at 1500mms\nG1 Z0.8 ;Move Z to 0.8\nG1 F300 X180 E40 ;Extrude a line of filament\nG1 F1200 Z2 ;Raise Z\nG92 E0 ;Set extruder position to zero\nG28 ;Auto home"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "G91 ;Switch to relative positioning\nG1 E-1 ;Retract filament to lower pressure\nG0 X0 Y200 ;Move hotend to left and bed forward\nM104 S0 ;Cooldown hotend\nG90 ;Switch to absolute mode\nG92 E0 ;Set extruder to zero\nM140 S0 ;Cooldown bed\nM84 ; Disable steppers"
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 1
|
||||
}
|
||||
|
||||
}
|
||||
}
|
||||
132
resources/definitions/geeetech_Thunder.def.json
Normal file
132
resources/definitions/geeetech_Thunder.def.json
Normal file
|
|
@ -0,0 +1,132 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech Thunder",
|
||||
"inherits": "Geeetech_Base_Single_Extruder",
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"machine_extruder_trains": { "0": "Geeetech_Single_Extruder" }
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_print": { "value": 3500 },
|
||||
"acceleration_travel": { "value": 5000 },
|
||||
"cool_fan_full_at_height":
|
||||
{
|
||||
"label": "Regular Fan Speed at Height",
|
||||
"value": "layer_height_0 + layer_height"
|
||||
},
|
||||
"cool_fan_speed":
|
||||
{
|
||||
"maximum_value": "151",
|
||||
"value": "151 if speed_infill>=200 else 100"
|
||||
},
|
||||
"cool_fan_speed_max":
|
||||
{
|
||||
"maximum_value": "151",
|
||||
"value": "cool_fan_speed"
|
||||
},
|
||||
"cool_fan_speed_min":
|
||||
{
|
||||
"maximum_value": "151",
|
||||
"value": "cool_fan_speed"
|
||||
},
|
||||
"cool_min_layer_time": { "value": "1.3 if speed_infill>=200 else 2.5" },
|
||||
"fill_outline_gaps":
|
||||
{
|
||||
"label": "Print Thin Walls",
|
||||
"value": false
|
||||
},
|
||||
"gantry_height": { "value": 35 },
|
||||
"infill_before_walls":
|
||||
{
|
||||
"label": "Infill Before Walls",
|
||||
"value": false
|
||||
},
|
||||
"infill_overlap":
|
||||
{
|
||||
"label": "Infill Overlap Percentage",
|
||||
"value": 10.0
|
||||
},
|
||||
"infill_sparse_density":
|
||||
{
|
||||
"label": "Infill Density",
|
||||
"value": "15"
|
||||
},
|
||||
"infill_wipe_dist":
|
||||
{
|
||||
"label": "Infill Wipe Distance",
|
||||
"value": 0.0
|
||||
},
|
||||
"line_width": { "value": "1.2*machine_nozzle_size if speed_infill>=200 else machine_nozzle_size" },
|
||||
"machine_depth": { "default_value": 250 },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Switch to relative positioning\nG1 E-2.5 F2700 ;Retract filament\nG1 E-1.5 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Move away\nG1 Z10 ;lift print head\nG90 ;Switch to absolute positioning\nG28 X Y ;homing XY\nM106 S0 ;off Fan\nM104 S0 ;Cooldown hotend\nM140 S0 ;Cooldown bed\nM84 X Y E ;Disable steppers" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-20, 25],
|
||||
[20, 25],
|
||||
[20, -25],
|
||||
[-20, -25]
|
||||
]
|
||||
},
|
||||
"machine_height": { "default_value": 260 },
|
||||
"machine_max_acceleration_e": { "value": 3500 },
|
||||
"machine_max_acceleration_x": { "value": 5000 },
|
||||
"machine_max_acceleration_y": { "value": 4000 },
|
||||
"machine_max_acceleration_z": { "value": 50 },
|
||||
"machine_max_feedrate_e": { "value": 60 },
|
||||
"machine_max_feedrate_x": { "value": 300 },
|
||||
"machine_max_jerk_e": { "value": 8 },
|
||||
"machine_max_jerk_xy": { "value": 45 },
|
||||
"machine_max_jerk_z": { "value": 0.8 },
|
||||
"machine_name": { "default_value": "Geeetech Thunder" },
|
||||
"machine_start_gcode": { "default_value": ";Official viki homepage for Thunder:https://www.geeetech.com/wiki/index.php/Geeetech_Thunder_3D_printer \n\nM104 S{material_print_temperature_layer_0} ; Set Hotend Temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Bed Temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Hotend Temperature\nG92 E0 ; Reset Extruder\nG28 ; Home all axes\nM107 P0 ;Off Main Fan\nM107 P1 ;Off Aux Fan\nM2012 P8 S1 F100 ; ON Light\n;M106 P0 S383 ; ON MainFan 150% if need\n;M106 P1 S255 ; ON Aux Fan 100% if need\nG1 Z5.0 F3000 ;Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.8 F5000 ; Move to start position\nG1 X0.1 Y200.0 Z1.2 F1500 E30 ; Draw the first line\nG92 E0 ; Reset Extruder\nG1 X0.4 Y200.0 Z1.2 F3000 ; Move to side a little\nG1 X0.4 Y20 Z1.2 F1500 E25 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.4 F3000.0 ; Scrape off nozzle residue" },
|
||||
"machine_width": { "default_value": 250 },
|
||||
"material_flow_layer_0": { "value": 95 },
|
||||
"material_print_temperature":
|
||||
{
|
||||
"maximum_value": "250",
|
||||
"value": "200 if speed_infill <=150 else 205 if speed_infill <= 200 else 215 if speed_infill <= 260 else 220"
|
||||
},
|
||||
"material_print_temperature_layer_0":
|
||||
{
|
||||
"maximum_value_warning": 300,
|
||||
"value": "material_print_temperature"
|
||||
},
|
||||
"retraction_speed": { "value": 35 },
|
||||
"skin_overlap":
|
||||
{
|
||||
"label": "Skin Overlap Percentage",
|
||||
"value": 10.0
|
||||
},
|
||||
"small_hole_max_size": { "value": "8 if speed_infill>=200 else 0" },
|
||||
"speed_infill": { "maximum_value_warning": "300" },
|
||||
"speed_print":
|
||||
{
|
||||
"maximum_value_warning": "300",
|
||||
"value": 250
|
||||
},
|
||||
"speed_roofing": { "maximum_value_warning": "300" },
|
||||
"speed_support": { "maximum_value_warning": "200" },
|
||||
"speed_support_bottom": { "maximum_value_warning": "200" },
|
||||
"speed_support_infill": { "maximum_value_warning": "200" },
|
||||
"speed_support_interface": { "maximum_value_warning": "200" },
|
||||
"speed_support_roof": { "maximum_value_warning": "200" },
|
||||
"speed_topbottom": { "maximum_value_warning": "300" },
|
||||
"speed_travel_layer_0": { "maximum_value_warning": "200" },
|
||||
"speed_wall": { "maximum_value_warning": "300" },
|
||||
"speed_wall_0": { "maximum_value_warning": "300" },
|
||||
"speed_wall_x": { "maximum_value_warning": "300" },
|
||||
"wall_0_wipe_dist":
|
||||
{
|
||||
"label": "Outer Wall Wipe Distance",
|
||||
"value": 0.0
|
||||
},
|
||||
"zig_zaggify_infill":
|
||||
{
|
||||
"label": "Connect Infill Lines",
|
||||
"value": true
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -1,113 +0,0 @@
|
|||
{
|
||||
"version": 2,
|
||||
"name": "Geeetech A30",
|
||||
"inherits": "fdmprinter",
|
||||
"metadata": {
|
||||
"author": "William & Cataldo URSO",
|
||||
"manufacturer": "Geeetech",
|
||||
"file_formats": "text/x-gcode",
|
||||
"visible": true,
|
||||
"has_materials": true,
|
||||
"preferred_quality_type": "draft",
|
||||
"machine_extruder_trains": {
|
||||
"0": "geeetech_a30_extruder_0"
|
||||
}
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": {
|
||||
"default_value": "Geeetech A30"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G28 ;Home\nM190 S{material_bed_temperature}\nM109 S{material_print_temperature} T0\nG1 Z15.0 F6000 ;Move the platform down 15mm\nG92 E0\nG1 F200 E3\nG92 E0"
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 S0;Cooling the heat end\nM140 S0;Cooling the heat bed\nG92 E1\nG1 E-1 F300\nG28 X0 Y0;Home X axis and Y axis\nM84"
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 320
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 420
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 320
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"material_diameter": {
|
||||
"default_value": 1.75
|
||||
},
|
||||
"machine_nozzle_size": {
|
||||
"default_value": 0.4
|
||||
},
|
||||
"layer_height": {
|
||||
"default_value": 0.1
|
||||
},
|
||||
"layer_height_0": {
|
||||
"default_value": 0.3
|
||||
},
|
||||
"retraction_amount": {
|
||||
"default_value": 2
|
||||
},
|
||||
"retraction_speed": {
|
||||
"default_value": 25
|
||||
},
|
||||
"adhesion_type": {
|
||||
"default_value": "skirt"
|
||||
},
|
||||
"machine_head_with_fans_polygon": {
|
||||
"default_value": [
|
||||
[-75, 35],
|
||||
[18, 35],
|
||||
[18, -18],
|
||||
[-75, -18]
|
||||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"value": "55"
|
||||
},
|
||||
"machine_max_feedrate_x": {
|
||||
"default_value": 300
|
||||
},
|
||||
"machine_max_feedrate_y": {
|
||||
"default_value": 300
|
||||
},
|
||||
"machine_max_feedrate_z": {
|
||||
"default_value": 7
|
||||
},
|
||||
"machine_max_feedrate_e": {
|
||||
"default_value": 50
|
||||
},
|
||||
"machine_max_acceleration_x": {
|
||||
"default_value": 2000
|
||||
},
|
||||
"machine_max_acceleration_y": {
|
||||
"default_value": 2000
|
||||
},
|
||||
"machine_max_acceleration_z": {
|
||||
"default_value": 100
|
||||
},
|
||||
"machine_max_acceleration_e": {
|
||||
"default_value": 10000
|
||||
},
|
||||
"machine_acceleration": {
|
||||
"default_value": 2000
|
||||
},
|
||||
"machine_max_jerk_xy": {
|
||||
"default_value": 10
|
||||
},
|
||||
"machine_max_jerk_z": {
|
||||
"default_value": 1
|
||||
},
|
||||
"machine_max_jerk_e": {
|
||||
"default_value": 5
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "Repetier"
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -58,6 +58,7 @@
|
|||
"jerk_travel_enabled": { "value": false },
|
||||
"jerk_wall": { "minimum_value_warning": 20 },
|
||||
"jerk_wall_0": { "minimum_value_warning": 20 },
|
||||
"layer_height": { "value": 0.15 },
|
||||
"layer_height_0": { "value": "max(0.2, layer_height)" },
|
||||
"line_width": { "value": "machine_nozzle_size" },
|
||||
"machine_max_feedrate_e": { "default_value": 45 },
|
||||
|
|
@ -75,7 +76,7 @@
|
|||
},
|
||||
"meshfix_maximum_deviation": { "value": "machine_nozzle_size / 10" },
|
||||
"meshfix_maximum_resolution": { "value": "max(speed_wall_0 / 75, 0.5)" },
|
||||
"minimum_support_area": { "value": "4.0" },
|
||||
"minimum_support_area": { "value": "(2 + support_offset)**2" },
|
||||
"raft_base_speed": { "value": "raft_speed" },
|
||||
"raft_base_thickness": { "value": "min(machine_nozzle_size * 0.75, 0.3)" },
|
||||
"raft_interface_fan_speed": { "value": "(raft_base_fan_speed + raft_surface_fan_speed) / 2" },
|
||||
|
|
|
|||
|
|
@ -2,102 +2,105 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker 2",
|
||||
"inherits": "ultimaker",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"weight": 3,
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "ultimaker2_platform.obj",
|
||||
"platform_texture": "Ultimaker2backplate.png",
|
||||
"platform_offset": [9, 0, 0],
|
||||
"has_materials": false,
|
||||
"has_machine_quality": true,
|
||||
"preferred_variant_name": "0.4 mm",
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker2_extruder_0"
|
||||
},
|
||||
"exclude_materials": [
|
||||
"generic_hips",
|
||||
"generic_petg",
|
||||
"structur3d_dap100silicone",
|
||||
"ultimaker_petg_red",
|
||||
"ultimaker_petg_blue",
|
||||
"ultimaker_petg_grey",
|
||||
"ultimaker_petg_black",
|
||||
"ultimaker_petg_green",
|
||||
"ultimaker_petg_white",
|
||||
"ultimaker_petg_orange",
|
||||
"ultimaker_petg_silver",
|
||||
"ultimaker_petg_yellow",
|
||||
"ultimaker_petg_transparent",
|
||||
"ultimaker_petg_red_translucent",
|
||||
"ultimaker_petg_blue_translucent",
|
||||
"ultimaker_petg_green_translucent",
|
||||
"ultimaker_petg_yellow_fluorescent"
|
||||
],
|
||||
"firmware_file": "MarlinUltimaker2.hex",
|
||||
"exclude_materials": [ "generic_hips", "generic_petg", "structur3d_dap100silicone", "ultimaker_petg_red", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent"]
|
||||
"has_machine_quality": true,
|
||||
"has_materials": false,
|
||||
"machine_extruder_trains": { "0": "ultimaker2_extruder_0" },
|
||||
"platform_offset": [
|
||||
9,
|
||||
0,
|
||||
0
|
||||
],
|
||||
"platform_texture": "Ultimaker2backplate.png",
|
||||
"preferred_variant_name": "0.4 mm",
|
||||
"weight": 3
|
||||
},
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker 2" },
|
||||
"machine_start_gcode" : {
|
||||
"value": "\"G0 F3000 Y50 ;avoid prime blob\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E10 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 Y50 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\""
|
||||
},
|
||||
"machine_end_gcode" : {
|
||||
"value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\" if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\""
|
||||
},
|
||||
"machine_width": {
|
||||
"default_value": 223
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 223
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 205
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
"overrides":
|
||||
{
|
||||
"cool_fan_speed_0": { "value": 0 },
|
||||
"gantry_height": { "value": "48" },
|
||||
"layer_height_0": { "value": 0.3 },
|
||||
"machine_acceleration": { "default_value": 3000 },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"machine_depth": { "default_value": 223 },
|
||||
"machine_disallowed_areas":
|
||||
{
|
||||
"default_value": [
|
||||
[
|
||||
[-115, 112.5],
|
||||
[-82, 112.5],
|
||||
[-84, 102.5],
|
||||
[-115, 102.5]
|
||||
],
|
||||
[
|
||||
[115, 112.5],
|
||||
[115, 102.5],
|
||||
[110, 102.5],
|
||||
[108, 112.5]
|
||||
],
|
||||
[
|
||||
[-115, -112.5],
|
||||
[-115, -104.5],
|
||||
[-84, -104.5],
|
||||
[-82, -112.5]
|
||||
],
|
||||
[
|
||||
[115, -112.5],
|
||||
[108, -112.5],
|
||||
[110, -104.5],
|
||||
[115, -104.5]
|
||||
]
|
||||
]
|
||||
},
|
||||
"machine_end_gcode": { "value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\" if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\"" },
|
||||
"machine_gcode_flavor": { "default_value": "UltiGCode" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[ -42, 12 ],
|
||||
[ -42, -32 ],
|
||||
[ 62, 12 ],
|
||||
[ 62, -32 ]
|
||||
[-42, 12],
|
||||
[-42, -32],
|
||||
[62, 12],
|
||||
[62, -32]
|
||||
]
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"gantry_height": {
|
||||
"value": "48"
|
||||
},
|
||||
"machine_use_extruder_offset_to_offset_coords": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "UltiGCode"
|
||||
},
|
||||
"machine_disallowed_areas": {
|
||||
"default_value": [
|
||||
[[-115, 112.5], [ -82, 112.5], [ -84, 102.5], [-115, 102.5]],
|
||||
[[ 115, 112.5], [ 115, 102.5], [ 110, 102.5], [ 108, 112.5]],
|
||||
[[-115, -112.5], [-115, -104.5], [ -84, -104.5], [ -82, -112.5]],
|
||||
[[ 115, -112.5], [ 108, -112.5], [ 110, -104.5], [ 115, -104.5]]
|
||||
]},
|
||||
"machine_nozzle_tip_outer_diameter": {
|
||||
"default_value": 1
|
||||
},
|
||||
"machine_nozzle_head_distance": {
|
||||
"default_value": 3
|
||||
},
|
||||
"machine_max_feedrate_x": {
|
||||
"default_value": 300
|
||||
},
|
||||
"machine_max_feedrate_y": {
|
||||
"default_value": 300
|
||||
},
|
||||
"machine_max_feedrate_z": {
|
||||
"default_value": 40
|
||||
},
|
||||
"machine_acceleration": {
|
||||
"default_value": 3000
|
||||
},
|
||||
"support_z_distance": {
|
||||
"value": "0.1"
|
||||
},
|
||||
"cool_fan_speed_0": {
|
||||
"value": 0
|
||||
},
|
||||
"layer_height_0": {
|
||||
"value": 0.3
|
||||
},
|
||||
"speed_slowdown_layers": {
|
||||
"value": 2
|
||||
}
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_height": { "default_value": 205 },
|
||||
"machine_max_feedrate_x": { "default_value": 300 },
|
||||
"machine_max_feedrate_y": { "default_value": 300 },
|
||||
"machine_max_feedrate_z": { "default_value": 40 },
|
||||
"machine_name": { "default_value": "Ultimaker 2" },
|
||||
"machine_nozzle_head_distance": { "default_value": 3 },
|
||||
"machine_nozzle_tip_outer_diameter": { "default_value": 1 },
|
||||
"machine_start_gcode": { "value": "\"G0 F3000 Y50 ;avoid prime blob\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E10 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 Y50 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\"" },
|
||||
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
|
||||
"machine_width": { "default_value": 223 },
|
||||
"speed_slowdown_layers": { "value": 2 },
|
||||
"support_z_distance": { "value": "0.1" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,25 +2,21 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker 2 Extended",
|
||||
"inherits": "ultimaker2",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"quality_definition": "ultimaker2",
|
||||
"weight": 3,
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "ultimaker2_platform.obj",
|
||||
"firmware_file": "MarlinUltimaker2extended.hex",
|
||||
"machine_extruder_trains": { "0": "ultimaker2_extended_extruder_0" },
|
||||
"platform_texture": "Ultimaker2Extendedbackplate.png",
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker2_extended_extruder_0"
|
||||
},
|
||||
"firmware_file": "MarlinUltimaker2extended.hex"
|
||||
"quality_definition": "ultimaker2",
|
||||
"weight": 3
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker 2 Extended" },
|
||||
"machine_height": {
|
||||
"default_value": 305
|
||||
}
|
||||
"overrides":
|
||||
{
|
||||
"machine_height": { "default_value": 305 },
|
||||
"machine_name": { "default_value": "Ultimaker 2 Extended" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,11 +2,9 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker 2 Extended with Olsson",
|
||||
"inherits": "ultimaker2_extended",
|
||||
"metadata": {
|
||||
"has_variants": true
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"metadata": { "has_variants": true },
|
||||
"overrides":
|
||||
{
|
||||
"machine_name": { "default_value": "Ultimaker 2 Extended with Olsson" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,25 +2,21 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker 2 Extended+",
|
||||
"inherits": "ultimaker2_plus",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"quality_definition": "ultimaker2_plus",
|
||||
"weight": 2,
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "ultimaker2_platform.obj",
|
||||
"firmware_file": "MarlinUltimaker2extended-plus.hex",
|
||||
"machine_extruder_trains": { "0": "ultimaker2_extended_plus_extruder_0" },
|
||||
"platform_texture": "Ultimaker2ExtendedPlusbackplate.png",
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker2_extended_plus_extruder_0"
|
||||
},
|
||||
"firmware_file": "MarlinUltimaker2extended-plus.hex"
|
||||
"quality_definition": "ultimaker2_plus",
|
||||
"weight": 2
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker 2 Extended+" },
|
||||
"machine_height": {
|
||||
"default_value": 305
|
||||
}
|
||||
"overrides":
|
||||
{
|
||||
"machine_height": { "default_value": 305 },
|
||||
"machine_name": { "default_value": "Ultimaker 2 Extended+" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -1,44 +1,59 @@
|
|||
{
|
||||
"version": 2,
|
||||
"version": 2,
|
||||
"name": "Ultimaker 2 Go",
|
||||
"inherits": "ultimaker2",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"quality_definition": "ultimaker2",
|
||||
"weight": 3,
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "ultimaker2go_platform.obj",
|
||||
"firmware_file": "MarlinUltimaker2go.hex",
|
||||
"machine_extruder_trains": { "0": "ultimaker2_go_extruder_0" },
|
||||
"platform_offset": [
|
||||
0,
|
||||
0,
|
||||
0
|
||||
],
|
||||
"platform_texture": "Ultimaker2Gobackplate.png",
|
||||
"platform_offset": [0, 0, 0],
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker2_go_extruder_0"
|
||||
},
|
||||
"firmware_file": "MarlinUltimaker2go.hex"
|
||||
"quality_definition": "ultimaker2",
|
||||
"weight": 3
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker 2 Go" },
|
||||
"machine_width": {
|
||||
"default_value": 120
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 120
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 115
|
||||
},
|
||||
"machine_heated_bed": {
|
||||
"default_value": false
|
||||
},
|
||||
"machine_disallowed_areas": {
|
||||
"overrides":
|
||||
{
|
||||
"machine_depth": { "default_value": 120 },
|
||||
"machine_disallowed_areas":
|
||||
{
|
||||
"default_value": [
|
||||
[[-60, 60], [-33, 60], [-35, 52], [-60, 52]],
|
||||
[[ 60, 60], [ 60, 52], [ 35, 52], [ 33, 60]],
|
||||
[[-60, -60], [-60, -52], [-35, -52], [-33, -60]],
|
||||
[[ 60, -60], [ 33, -60], [ 35, -52], [ 60, -52]]
|
||||
[
|
||||
[-60, 60],
|
||||
[-33, 60],
|
||||
[-35, 52],
|
||||
[-60, 52]
|
||||
],
|
||||
[
|
||||
[60, 60],
|
||||
[60, 52],
|
||||
[35, 52],
|
||||
[33, 60]
|
||||
],
|
||||
[
|
||||
[-60, -60],
|
||||
[-60, -52],
|
||||
[-35, -52],
|
||||
[-33, -60]
|
||||
],
|
||||
[
|
||||
[60, -60],
|
||||
[33, -60],
|
||||
[35, -52],
|
||||
[60, -52]
|
||||
]
|
||||
]
|
||||
}
|
||||
},
|
||||
"machine_heated_bed": { "default_value": false },
|
||||
"machine_height": { "default_value": 115 },
|
||||
"machine_name": { "default_value": "Ultimaker 2 Go" },
|
||||
"machine_width": { "default_value": 120 }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,12 +2,13 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker 2 with Olsson Block",
|
||||
"inherits": "ultimaker2",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"has_variants": true,
|
||||
"quality_definition": "ultimaker2"
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"overrides":
|
||||
{
|
||||
"machine_name": { "default_value": "Ultimaker 2 with Olsson Block" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,72 +2,104 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker 2+",
|
||||
"inherits": "ultimaker2",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"weight": 1,
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "ultimaker2_platform.obj",
|
||||
"exclude_materials": [
|
||||
"generic_hips",
|
||||
"generic_petg",
|
||||
"generic_bam",
|
||||
"ultimaker_bam",
|
||||
"generic_pva",
|
||||
"ultimaker_pva",
|
||||
"generic_tough_pla",
|
||||
"ultimaker_tough_pla_black",
|
||||
"ultimaker_tough_pla_green",
|
||||
"ultimaker_tough_pla_red",
|
||||
"ultimaker_tough_pla_white",
|
||||
"generic_cffcpe",
|
||||
"generic_cffpa",
|
||||
"generic_gffcpe",
|
||||
"generic_gffpa",
|
||||
"structur3d_dap100silicone",
|
||||
"ultimaker_petg_red",
|
||||
"ultimaker_petg_blue",
|
||||
"ultimaker_petg_grey",
|
||||
"ultimaker_petg_black",
|
||||
"ultimaker_petg_green",
|
||||
"ultimaker_petg_white",
|
||||
"ultimaker_petg_orange",
|
||||
"ultimaker_petg_silver",
|
||||
"ultimaker_petg_yellow",
|
||||
"ultimaker_petg_transparent",
|
||||
"ultimaker_petg_red_translucent",
|
||||
"ultimaker_petg_blue_translucent",
|
||||
"ultimaker_petg_green_translucent",
|
||||
"ultimaker_petg_yellow_fluorescent"
|
||||
],
|
||||
"firmware_file": "MarlinUltimaker2plus.hex",
|
||||
"first_start_actions": [],
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"has_variants": true,
|
||||
"machine_extruder_trains": { "0": "ultimaker2_plus_extruder_0" },
|
||||
"platform_texture": "Ultimaker2Plusbackplate.png",
|
||||
"preferred_variant_name": "0.4 mm",
|
||||
"has_variants": true,
|
||||
"has_materials": true,
|
||||
"has_machine_quality": true,
|
||||
"exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone", "ultimaker_petg_red", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent"],
|
||||
"first_start_actions": [],
|
||||
"supported_actions": [],
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker2_plus_extruder_0"
|
||||
},
|
||||
"firmware_file": "MarlinUltimaker2plus.hex"
|
||||
"weight": 1
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker 2+" },
|
||||
"speed_infill": {
|
||||
"value": "speed_print"
|
||||
},
|
||||
"speed_wall_x": {
|
||||
"value": "speed_wall"
|
||||
},
|
||||
"layer_height_0": {
|
||||
"value": "round(machine_nozzle_size / 1.5, 2)"
|
||||
},
|
||||
"speed_support": {
|
||||
"value": "speed_wall_0"
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 205
|
||||
},
|
||||
"machine_show_variants": {
|
||||
"default_value": true
|
||||
},
|
||||
"gantry_height": {
|
||||
"value": "52"
|
||||
},
|
||||
"machine_nozzle_head_distance": {
|
||||
"default_value": 5
|
||||
},
|
||||
"machine_heat_zone_length": {
|
||||
"default_value": 20
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": "52" },
|
||||
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
||||
"machine_disallowed_areas":
|
||||
{
|
||||
"default_value": [
|
||||
[
|
||||
[-115, 112.5],
|
||||
[-78, 112.5],
|
||||
[-80, 102.5],
|
||||
[-115, 102.5]
|
||||
],
|
||||
[
|
||||
[115, 112.5],
|
||||
[115, 102.5],
|
||||
[105, 102.5],
|
||||
[103, 112.5]
|
||||
],
|
||||
[
|
||||
[-115, -112.5],
|
||||
[-115, -104.5],
|
||||
[-84, -104.5],
|
||||
[-82, -112.5]
|
||||
],
|
||||
[
|
||||
[115, -112.5],
|
||||
[108, -112.5],
|
||||
[110, -104.5],
|
||||
[115, -104.5]
|
||||
]
|
||||
]
|
||||
},
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[ -44, 14 ],
|
||||
[ -44, -34 ],
|
||||
[ 64, 14 ],
|
||||
[ 64, -34 ]
|
||||
[-44, 14],
|
||||
[-44, -34],
|
||||
[64, 14],
|
||||
[64, -34]
|
||||
]
|
||||
},
|
||||
"machine_disallowed_areas": {
|
||||
"default_value": [
|
||||
[[-115, 112.5], [ -78, 112.5], [ -80, 102.5], [-115, 102.5]],
|
||||
[[ 115, 112.5], [ 115, 102.5], [ 105, 102.5], [ 103, 112.5]],
|
||||
[[-115, -112.5], [-115, -104.5], [ -84, -104.5], [ -82, -112.5]],
|
||||
[[ 115, -112.5], [ 108, -112.5], [ 110, -104.5], [ 115, -104.5]]
|
||||
]
|
||||
}
|
||||
"machine_heat_zone_length": { "default_value": 20 },
|
||||
"machine_height": { "default_value": 205 },
|
||||
"machine_name": { "default_value": "Ultimaker 2+" },
|
||||
"machine_nozzle_head_distance": { "default_value": 5 },
|
||||
"machine_show_variants": { "default_value": true },
|
||||
"speed_infill": { "value": "speed_print" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
"speed_wall_x": { "value": "speed_wall" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,87 +2,131 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker 2+ Connect",
|
||||
"inherits": "ultimaker2",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"weight": 1,
|
||||
"file_formats": "application/x-ufp;text/x-gcode",
|
||||
"platform": "ultimaker2_plus_connect_platform.obj",
|
||||
"platform_texture": "Ultimaker2PlusConnectbackplate.png",
|
||||
"platform_offset": [-1, -6, 0],
|
||||
"preferred_variant_name": "0.4 mm",
|
||||
"has_variants": true,
|
||||
"has_materials": true,
|
||||
"exclude_materials": [
|
||||
"generic_hips",
|
||||
"generic_petg",
|
||||
"generic_bam",
|
||||
"ultimaker_bam",
|
||||
"generic_pva",
|
||||
"ultimaker_pva",
|
||||
"generic_tough_pla",
|
||||
"ultimaker_tough_pla_black",
|
||||
"ultimaker_tough_pla_green",
|
||||
"ultimaker_tough_pla_red",
|
||||
"ultimaker_tough_pla_white",
|
||||
"generic_cffcpe",
|
||||
"generic_cffpa",
|
||||
"generic_gffcpe",
|
||||
"generic_gffpa",
|
||||
"structur3d_dap100silicone"
|
||||
],
|
||||
"first_start_actions": [],
|
||||
"has_machine_materials": true,
|
||||
"has_machine_quality": true,
|
||||
"exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone" ],
|
||||
"first_start_actions": [],
|
||||
"has_materials": true,
|
||||
"has_variants": true,
|
||||
"machine_extruder_trains": { "0": "ultimaker2_plus_connect_extruder_0" },
|
||||
"platform_offset": [
|
||||
-1,
|
||||
-6,
|
||||
0
|
||||
],
|
||||
"platform_texture": "Ultimaker2PlusConnectbackplate.png",
|
||||
"preferred_variant_name": "0.4 mm",
|
||||
"supported_actions": [],
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker2_plus_connect_extruder_0"
|
||||
},
|
||||
"supports_network_connection": true,
|
||||
"supports_usb_connection": false,
|
||||
"supports_network_connection": true
|
||||
"weight": 1
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker 2+ Connect" },
|
||||
"machine_gcode_flavor": { "default_value": "Griffin" },
|
||||
"machine_width": { "default_value": 223 },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_height": { "default_value": 205 },
|
||||
"machine_show_variants": { "default_value": true },
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": "52" },
|
||||
"machine_nozzle_head_distance": { "default_value": 5 },
|
||||
"machine_heat_zone_length": { "default_value": 20 },
|
||||
"infill_overlap": { "value": "0" },
|
||||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'grid'" },
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
||||
"machine_depth": { "default_value": 220 },
|
||||
"machine_disallowed_areas":
|
||||
{
|
||||
"default_value": [
|
||||
[
|
||||
[-115, 112.5],
|
||||
[-83, 112.5],
|
||||
[-85, 104.0],
|
||||
[-115, 104.0]
|
||||
],
|
||||
[
|
||||
[115, 112.5],
|
||||
[115, 104.0],
|
||||
[104, 104.0],
|
||||
[102, 112.5]
|
||||
],
|
||||
[
|
||||
[-115, -112.5],
|
||||
[-115, -104.0],
|
||||
[-87, -104.0],
|
||||
[-85, -112.5]
|
||||
],
|
||||
[
|
||||
[115, -112.5],
|
||||
[104, -112.5],
|
||||
[106, -104.0],
|
||||
[115, -104.0]
|
||||
]
|
||||
]
|
||||
},
|
||||
"machine_end_gcode": { "value": "''" },
|
||||
"machine_gcode_flavor": { "default_value": "Griffin" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[ -44, 14 ],
|
||||
[ -44, -34 ],
|
||||
[ 64, 14 ],
|
||||
[ 64, -34 ]
|
||||
[-44, 14],
|
||||
[-44, -34],
|
||||
[64, 14],
|
||||
[64, -34]
|
||||
]
|
||||
},
|
||||
"machine_disallowed_areas":
|
||||
{
|
||||
"default_value": [
|
||||
[[-115, 112.5], [ -83, 112.5], [ -85, 104.0], [-115, 104.0]],
|
||||
[[ 115, 112.5], [ 115, 104.0], [ 104, 104.0], [ 102, 112.5]],
|
||||
[[-115, -112.5], [-115, -104.0], [ -87, -104.0], [ -85, -112.5]],
|
||||
[[ 115, -112.5], [ 104, -112.5], [ 106, -104.0], [ 115, -104.0]]
|
||||
]
|
||||
},
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"infill_overlap": { "value": "0" },
|
||||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'grid'" },
|
||||
"layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
|
||||
"optimize_wall_printing_order": { "value": "True" },
|
||||
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
"material_initial_print_temperature": {
|
||||
"value": "material_print_temperature",
|
||||
"maximum_value": 260
|
||||
},
|
||||
"material_final_print_temperature": {
|
||||
"value": "material_print_temperature",
|
||||
"maximum_value": 260
|
||||
},
|
||||
"material_print_temperature_layer_0": {
|
||||
"maximum_value": 260
|
||||
},
|
||||
"machine_heat_zone_length": { "default_value": 20 },
|
||||
"machine_height": { "default_value": 205 },
|
||||
"machine_name": { "default_value": "Ultimaker 2+ Connect" },
|
||||
"machine_nozzle_head_distance": { "default_value": 5 },
|
||||
"machine_show_variants": { "default_value": true },
|
||||
"machine_start_gcode": { "value": "''" },
|
||||
"machine_end_gcode": { "value": "''" },
|
||||
"machine_width": { "default_value": 223 },
|
||||
"material_bed_temperature": { "maximum_value": 110 },
|
||||
"material_bed_temperature_layer_0": { "maximum_value": 110 },
|
||||
"material_final_print_temperature":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"value": "material_print_temperature"
|
||||
},
|
||||
"material_initial_print_temperature":
|
||||
{
|
||||
"maximum_value": 260,
|
||||
"value": "material_print_temperature"
|
||||
},
|
||||
"material_print_temperature": { "maximum_value": 260 },
|
||||
"meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
|
||||
"material_print_temperature_layer_0": { "maximum_value": 260 },
|
||||
"meshfix_maximum_deviation": { "value": "(layer_height / 3) if magic_spiralize else (layer_height / 4)" },
|
||||
"meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
|
||||
"meshfix_maximum_travel_resolution": { "value": 0.5 },
|
||||
"prime_blob_enable": { "enabled": true, "default_value": true, "value": "resolveOrValue('print_sequence') != 'one_at_a_time'" },
|
||||
"optimize_wall_printing_order": { "value": "True" },
|
||||
"prime_blob_enable":
|
||||
{
|
||||
"default_value": true,
|
||||
"enabled": true,
|
||||
"value": "resolveOrValue('print_sequence') != 'one_at_a_time'"
|
||||
},
|
||||
"retraction_prime_speed": { "value": "15" },
|
||||
"retraction_speed": {"value": "45" },
|
||||
"speed_wall_x": { "value": "speed_wall" }
|
||||
"retraction_speed": { "value": "45" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
"speed_wall_x": { "value": "speed_wall" },
|
||||
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,85 +2,54 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker 3",
|
||||
"inherits": "ultimaker",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"visible": true,
|
||||
"file_formats": "application/gzip;text/x-gcode",
|
||||
"platform": "ultimaker3_platform.obj",
|
||||
"platform_texture": "Ultimaker3backplate.png",
|
||||
"platform_offset": [0, 0, 0],
|
||||
"bom_numbers": [
|
||||
9066
|
||||
],
|
||||
"exclude_materials": [
|
||||
"generic_hips",
|
||||
"generic_cffcpe",
|
||||
"generic_cffpa",
|
||||
"generic_gffcpe",
|
||||
"generic_gffpa",
|
||||
"structur3d_dap100silicone"
|
||||
],
|
||||
"firmware_update_info":
|
||||
{
|
||||
"check_urls": [ "https://software.ultimaker.com/releases/firmware/9066/stable/um-update.swu.version" ],
|
||||
"id": 9066,
|
||||
"update_url": "https://ultimaker.com/firmware?utm_source=cura&utm_medium=software&utm_campaign=fw-update"
|
||||
},
|
||||
"first_start_actions": [ "DiscoverUM3Action" ],
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"has_variants": true,
|
||||
"exclude_materials": [ "generic_hips", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone" ],
|
||||
"preferred_variant_name": "AA 0.4",
|
||||
"preferred_quality_type": "normal",
|
||||
"variants_name": "Print core",
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker3_extruder_left",
|
||||
"1": "ultimaker3_extruder_right"
|
||||
},
|
||||
"first_start_actions": [ "DiscoverUM3Action" ],
|
||||
"platform_offset": [
|
||||
0,
|
||||
0,
|
||||
0
|
||||
],
|
||||
"platform_texture": "Ultimaker3backplate.png",
|
||||
"preferred_quality_type": "fast",
|
||||
"preferred_variant_name": "AA 0.4",
|
||||
"supported_actions": [ "DiscoverUM3Action" ],
|
||||
"supports_usb_connection": false,
|
||||
"supports_network_connection": true,
|
||||
"firmware_update_info": {
|
||||
"id": 9066,
|
||||
"check_urls":
|
||||
[
|
||||
"https://software.ultimaker.com/releases/firmware/9066/stable/um-update.swu.version"
|
||||
],
|
||||
"update_url": "https://ultimaker.com/firmware?utm_source=cura&utm_medium=software&utm_campaign=fw-update"
|
||||
},
|
||||
"bom_numbers": [
|
||||
9066
|
||||
]
|
||||
"supports_usb_connection": false,
|
||||
"variants_name": "Print core"
|
||||
},
|
||||
|
||||
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker 3" },
|
||||
"machine_width": { "default_value": 233 },
|
||||
"machine_depth": { "default_value": 215 },
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_nozzle_heat_up_speed": { "default_value": 1.4 },
|
||||
"machine_nozzle_cool_down_speed": { "default_value": 0.8 },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value":
|
||||
[
|
||||
[ -41.9, -45.8 ],
|
||||
[ -41.9, 33.9 ],
|
||||
[ 59.9, 33.9 ],
|
||||
[ 59.9, -45.8 ]
|
||||
]
|
||||
},
|
||||
"machine_gcode_flavor": { "default_value": "Griffin" },
|
||||
"machine_max_feedrate_x": { "default_value": 300 },
|
||||
"machine_max_feedrate_y": { "default_value": 300 },
|
||||
"machine_max_feedrate_z": { "default_value": 40 },
|
||||
"machine_acceleration": { "default_value": 3000 },
|
||||
"gantry_height": { "value": "60" },
|
||||
"machine_disallowed_areas": { "default_value": [
|
||||
[[92.8, -53.4], [92.8, -97.5], [116.5, -97.5], [116.5, -53.4]],
|
||||
[[73.8, 107.5], [73.8, 100.5], [116.5, 100.5], [116.5, 107.5]],
|
||||
[[74.6, 107.5], [74.6, 100.5], [116.5, 100.5], [116.5, 107.5]],
|
||||
[[74.9, -97.5], [74.9, -107.5], [116.5, -107.5], [116.5, -97.5]],
|
||||
[[-116.5, -103.5], [-116.5, -107.5], [-100.9, -107.5], [-100.9, -103.5]],
|
||||
[[-116.5, 105.8], [-96.9, 105.8], [-96.9, 107.5], [-116.5, 107.5]]
|
||||
]},
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"extruder_prime_pos_abs": { "default_value": true },
|
||||
"machine_start_gcode": { "default_value": "" },
|
||||
"machine_end_gcode": { "default_value": "G91 ;Relative movement\nG0 F15000 X8.0 Z0.5 E-4.5 ;Wiping+material retraction\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\nG90 ;Disable relative movement" },
|
||||
"prime_tower_position_x": { "value": "machine_depth - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) - 30" },
|
||||
"prime_tower_wipe_enabled": { "default_value": false },
|
||||
|
||||
"prime_blob_enable": { "enabled": true, "default_value": true, "value": "resolveOrValue('print_sequence') != 'one_at_a_time'" },
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_enabled": { "value": true },
|
||||
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
"acceleration_print": { "value": "3500" },
|
||||
|
|
@ -93,22 +62,97 @@
|
|||
"cool_fan_speed": { "value": "50" },
|
||||
"cool_fan_speed_max": { "value": "100" },
|
||||
"cool_min_speed": { "value": "5" },
|
||||
"default_material_print_temperature": { "value": "200" },
|
||||
"extruder_prime_pos_abs": { "default_value": true },
|
||||
"gantry_height": { "value": "60" },
|
||||
"infill_overlap": { "value": "0" },
|
||||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"jerk_enabled": { "value": "True" },
|
||||
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
||||
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
||||
"machine_acceleration": { "default_value": 3000 },
|
||||
"machine_depth": { "default_value": 215 },
|
||||
"machine_disallowed_areas":
|
||||
{
|
||||
"default_value": [
|
||||
[
|
||||
[92.8, -53.4],
|
||||
[92.8, -97.5],
|
||||
[116.5, -97.5],
|
||||
[116.5, -53.4]
|
||||
],
|
||||
[
|
||||
[73.8, 107.5],
|
||||
[73.8, 100.5],
|
||||
[116.5, 100.5],
|
||||
[116.5, 107.5]
|
||||
],
|
||||
[
|
||||
[74.6, 107.5],
|
||||
[74.6, 100.5],
|
||||
[116.5, 100.5],
|
||||
[116.5, 107.5]
|
||||
],
|
||||
[
|
||||
[74.9, -97.5],
|
||||
[74.9, -107.5],
|
||||
[116.5, -107.5],
|
||||
[116.5, -97.5]
|
||||
],
|
||||
[
|
||||
[-116.5, -103.5],
|
||||
[-116.5, -107.5],
|
||||
[-100.9, -107.5],
|
||||
[-100.9, -103.5]
|
||||
],
|
||||
[
|
||||
[-116.5, 105.8],
|
||||
[-96.9, 105.8],
|
||||
[-96.9, 107.5],
|
||||
[-116.5, 107.5]
|
||||
]
|
||||
]
|
||||
},
|
||||
"machine_end_gcode": { "default_value": "G91 ;Relative movement\nG0 F15000 X8.0 Z0.5 E-4.5 ;Wiping+material retraction\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\nG90 ;Disable relative movement" },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"machine_gcode_flavor": { "default_value": "Griffin" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-41.9, -45.8],
|
||||
[-41.9, 33.9],
|
||||
[59.9, 33.9],
|
||||
[59.9, -45.8]
|
||||
]
|
||||
},
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_max_feedrate_x": { "default_value": 300 },
|
||||
"machine_max_feedrate_y": { "default_value": 300 },
|
||||
"machine_max_feedrate_z": { "default_value": 40 },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
"default_material_print_temperature": { "value": "200" },
|
||||
"machine_name": { "default_value": "Ultimaker 3" },
|
||||
"machine_nozzle_cool_down_speed": { "default_value": 0.8 },
|
||||
"machine_nozzle_heat_up_speed": { "default_value": 1.4 },
|
||||
"machine_start_gcode": { "default_value": "" },
|
||||
"machine_width": { "default_value": 233 },
|
||||
"material_bed_temperature": { "maximum_value": "115" },
|
||||
"material_bed_temperature_layer_0": { "maximum_value": "115" },
|
||||
"multiple_mesh_overlap": { "value": "0" },
|
||||
"optimize_wall_printing_order": { "value": "True" },
|
||||
"prime_blob_enable":
|
||||
{
|
||||
"default_value": true,
|
||||
"enabled": true,
|
||||
"value": "resolveOrValue('print_sequence') != 'one_at_a_time'"
|
||||
},
|
||||
"prime_tower_enable": { "default_value": true },
|
||||
"prime_tower_position_x": { "value": "machine_depth - max(extruderValue(adhesion_extruder_nr, 'brim_width') * extruderValue(adhesion_extruder_nr, 'initial_layer_line_width_factor') / 100 if adhesion_type == 'brim' else (extruderValue(adhesion_extruder_nr, 'raft_margin') if adhesion_type == 'raft' else (extruderValue(adhesion_extruder_nr, 'skirt_gap') if adhesion_type == 'skirt' else 0)), max(extruderValues('travel_avoid_distance'))) - max(extruderValues('support_offset')) - sum(extruderValues('skirt_brim_line_width')) - 30" },
|
||||
"prime_tower_wipe_enabled": { "default_value": false },
|
||||
"retraction_amount": { "value": "6.5" },
|
||||
"retraction_hop": { "value": "2" },
|
||||
"retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
|
||||
"retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
|
||||
"retraction_hop_only_when_collides": { "value": "True" },
|
||||
"retraction_min_travel": { "value": "5" },
|
||||
"retraction_prime_speed": { "value": "15" },
|
||||
|
|
@ -130,4 +174,4 @@
|
|||
"wall_0_inset": { "value": "0" },
|
||||
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,42 +2,45 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker 3 Extended",
|
||||
"inherits": "ultimaker3",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"quality_definition": "ultimaker3",
|
||||
"visible": true,
|
||||
"file_formats": "application/gzip;text/x-gcode",
|
||||
"platform": "ultimaker3_platform.obj",
|
||||
"platform_texture": "Ultimaker3Extendedbackplate.png",
|
||||
"platform_offset": [0, 0, 0],
|
||||
"bom_numbers": [
|
||||
9511
|
||||
],
|
||||
"firmware_update_info":
|
||||
{
|
||||
"check_urls": [ "https://software.ultimaker.com/releases/firmware/9066/stable/um-update.swu.version" ],
|
||||
"id": 9511,
|
||||
"update_url": "https://ultimaker.com/firmware?utm_source=cura&utm_medium=software&utm_campaign=fw-update"
|
||||
},
|
||||
"first_start_actions": [ "DiscoverUM3Action" ],
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"has_variants": true,
|
||||
"preferred_variant_name": "AA 0.4",
|
||||
"variants_name": "Print core",
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker3_extended_extruder_left",
|
||||
"1": "ultimaker3_extended_extruder_right"
|
||||
},
|
||||
"first_start_actions": [ "DiscoverUM3Action" ],
|
||||
"platform_offset": [
|
||||
0,
|
||||
0,
|
||||
0
|
||||
],
|
||||
"platform_texture": "Ultimaker3Extendedbackplate.png",
|
||||
"preferred_variant_name": "AA 0.4",
|
||||
"quality_definition": "ultimaker3",
|
||||
"supported_actions": [ "DiscoverUM3Action" ],
|
||||
"firmware_update_info": {
|
||||
"id": 9511,
|
||||
"check_urls":
|
||||
[
|
||||
"https://software.ultimaker.com/releases/firmware/9066/stable/um-update.swu.version"
|
||||
],
|
||||
"update_url": "https://ultimaker.com/firmware?utm_source=cura&utm_medium=software&utm_campaign=fw-update"
|
||||
},
|
||||
"bom_numbers": [
|
||||
9511
|
||||
]
|
||||
"variants_name": "Print core"
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker 3 Extended" },
|
||||
"machine_height": { "default_value": 300 }
|
||||
"overrides":
|
||||
{
|
||||
"machine_height": { "default_value": 300 },
|
||||
"machine_name": { "default_value": "Ultimaker 3 Extended" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,75 +2,84 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker Original",
|
||||
"inherits": "ultimaker",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"weight": 4,
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "ultimaker_platform.3mf",
|
||||
"has_materials": true,
|
||||
"has_machine_quality": true,
|
||||
"exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent", "ultimaker_petg_red" ],
|
||||
"first_start_actions": ["UMOUpgradeSelection", "BedLevel"],
|
||||
"supported_actions": ["UMOUpgradeSelection", "BedLevel"],
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker_original_extruder_0"
|
||||
},
|
||||
"exclude_materials": [
|
||||
"generic_hips",
|
||||
"generic_petg",
|
||||
"generic_bam",
|
||||
"ultimaker_bam",
|
||||
"generic_pva",
|
||||
"ultimaker_pva",
|
||||
"generic_tough_pla",
|
||||
"ultimaker_tough_pla_black",
|
||||
"ultimaker_tough_pla_green",
|
||||
"ultimaker_tough_pla_red",
|
||||
"ultimaker_tough_pla_white",
|
||||
"generic_cffcpe",
|
||||
"generic_cffpa",
|
||||
"generic_gffcpe",
|
||||
"generic_gffpa",
|
||||
"structur3d_dap100silicone",
|
||||
"ultimaker_petg_blue",
|
||||
"ultimaker_petg_grey",
|
||||
"ultimaker_petg_black",
|
||||
"ultimaker_petg_green",
|
||||
"ultimaker_petg_white",
|
||||
"ultimaker_petg_orange",
|
||||
"ultimaker_petg_silver",
|
||||
"ultimaker_petg_yellow",
|
||||
"ultimaker_petg_transparent",
|
||||
"ultimaker_petg_red_translucent",
|
||||
"ultimaker_petg_blue_translucent",
|
||||
"ultimaker_petg_green_translucent",
|
||||
"ultimaker_petg_yellow_fluorescent",
|
||||
"ultimaker_petg_red"
|
||||
],
|
||||
"firmware_file": "MarlinUltimaker-{baudrate}.hex",
|
||||
"firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}.hex"
|
||||
"firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}.hex",
|
||||
"first_start_actions": [
|
||||
"UMOUpgradeSelection",
|
||||
"BedLevel"
|
||||
],
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains": { "0": "ultimaker_original_extruder_0" },
|
||||
"supported_actions": [
|
||||
"UMOUpgradeSelection",
|
||||
"BedLevel"
|
||||
],
|
||||
"weight": 4
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker Original" },
|
||||
"machine_width": {
|
||||
"default_value": 205
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 205
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"cool_fan_speed_0": { "value": 0 },
|
||||
"gantry_height": { "value": "55" },
|
||||
"infill_before_walls": { "value": "False" },
|
||||
"layer_height_0": { "value": 0.3 },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"machine_depth": { "default_value": 205 },
|
||||
"machine_end_gcode": { "value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'" },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[ -75, 35 ],
|
||||
[ -75, -18 ],
|
||||
[ 18, 35 ],
|
||||
[ 18, -18 ]
|
||||
[-75, 35],
|
||||
[-75, -18],
|
||||
[18, 35],
|
||||
[18, -18]
|
||||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"value": "55"
|
||||
},
|
||||
"machine_use_extruder_offset_to_offset_coords": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Y50 F9000\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"value": "'M104 S0 ;extruder heater off' + ('\\nM140 S0 ;heated bed heater off' if machine_heated_bed else '') + '\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning'"
|
||||
},
|
||||
"infill_before_walls": {
|
||||
"value": "False"
|
||||
},
|
||||
"cool_fan_speed_0": {
|
||||
"value": 0
|
||||
},
|
||||
"layer_height_0": {
|
||||
"value": 0.3
|
||||
},
|
||||
"speed_slowdown_layers": {
|
||||
"value": 2
|
||||
}
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_name": { "default_value": "Ultimaker Original" },
|
||||
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Y50 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
|
||||
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
|
||||
"machine_width": { "default_value": 205 },
|
||||
"speed_slowdown_layers": { "value": 2 }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,74 +2,88 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker Original Dual Extrusion",
|
||||
"inherits": "ultimaker",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"weight": 4,
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "ultimaker_platform.3mf",
|
||||
"has_materials": true,
|
||||
"exclude_materials": [
|
||||
"generic_hips",
|
||||
"generic_petg",
|
||||
"generic_bam",
|
||||
"ultimaker_bam",
|
||||
"generic_pva",
|
||||
"ultimaker_pva",
|
||||
"generic_tough_pla",
|
||||
"ultimaker_tough_pla_black",
|
||||
"ultimaker_tough_pla_green",
|
||||
"ultimaker_tough_pla_red",
|
||||
"ultimaker_tough_pla_white",
|
||||
"generic_cffcpe",
|
||||
"generic_cffpa",
|
||||
"generic_gffcpe",
|
||||
"generic_gffpa",
|
||||
"structur3d_dap100silicone",
|
||||
"ultimaker_petg_blue",
|
||||
"ultimaker_petg_grey",
|
||||
"ultimaker_petg_black",
|
||||
"ultimaker_petg_green",
|
||||
"ultimaker_petg_white",
|
||||
"ultimaker_petg_orange",
|
||||
"ultimaker_petg_silver",
|
||||
"ultimaker_petg_yellow",
|
||||
"ultimaker_petg_transparent",
|
||||
"ultimaker_petg_red_translucent",
|
||||
"ultimaker_petg_blue_translucent",
|
||||
"ultimaker_petg_green_translucent",
|
||||
"ultimaker_petg_yellow_fluorescent",
|
||||
"ultimaker_petg_red"
|
||||
],
|
||||
"firmware_file": "MarlinUltimaker-{baudrate}-dual.hex",
|
||||
"firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}-dual.hex",
|
||||
"first_start_actions": [
|
||||
"UMOUpgradeSelection",
|
||||
"BedLevel"
|
||||
],
|
||||
"has_machine_quality": true,
|
||||
"quality_definition": "ultimaker_original",
|
||||
"exclude_materials": ["generic_hips", "generic_petg", "generic_bam", "ultimaker_bam", "generic_pva", "ultimaker_pva", "generic_tough_pla", "ultimaker_tough_pla_black", "ultimaker_tough_pla_green", "ultimaker_tough_pla_red", "ultimaker_tough_pla_white", "generic_cffcpe", "generic_cffpa", "generic_gffcpe", "generic_gffpa", "structur3d_dap100silicone", "ultimaker_petg_blue", "ultimaker_petg_grey", "ultimaker_petg_black", "ultimaker_petg_green", "ultimaker_petg_white", "ultimaker_petg_orange", "ultimaker_petg_silver", "ultimaker_petg_yellow", "ultimaker_petg_transparent", "ultimaker_petg_red_translucent", "ultimaker_petg_blue_translucent", "ultimaker_petg_green_translucent", "ultimaker_petg_yellow_fluorescent", "ultimaker_petg_red" ],
|
||||
"has_materials": true,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker_original_dual_1st",
|
||||
"1": "ultimaker_original_dual_2nd"
|
||||
},
|
||||
"firmware_file": "MarlinUltimaker-{baudrate}-dual.hex",
|
||||
"firmware_hbk_file": "MarlinUltimaker-HBK-{baudrate}-dual.hex",
|
||||
"first_start_actions": ["UMOUpgradeSelection", "BedLevel"],
|
||||
"supported_actions": ["UMOUpgradeSelection", "BedLevel"]
|
||||
"quality_definition": "ultimaker_original",
|
||||
"supported_actions": [
|
||||
"UMOUpgradeSelection",
|
||||
"BedLevel"
|
||||
],
|
||||
"weight": 4
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker Original" },
|
||||
"machine_width": {
|
||||
"default_value": 205
|
||||
},
|
||||
"machine_height": {
|
||||
"default_value": 200
|
||||
},
|
||||
"machine_depth": {
|
||||
"default_value": 195
|
||||
},
|
||||
"machine_center_is_zero": {
|
||||
"default_value": false
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"gantry_height": { "value": "55" },
|
||||
"machine_center_is_zero": { "default_value": false },
|
||||
"machine_depth": { "default_value": 195 },
|
||||
"machine_end_gcode": { "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning" },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[ -75, 35 ],
|
||||
[ -75, -18 ],
|
||||
[ 18, 35 ],
|
||||
[ 18, -18 ]
|
||||
[-75, 35],
|
||||
[-75, -18],
|
||||
[18, 35],
|
||||
[18, -18]
|
||||
]
|
||||
},
|
||||
"gantry_height": {
|
||||
"value": "55"
|
||||
},
|
||||
"machine_use_extruder_offset_to_offset_coords": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_gcode_flavor": {
|
||||
"default_value": "RepRap (Marlin/Sprinter)"
|
||||
},
|
||||
"machine_start_gcode": {
|
||||
"default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nT1 ;Switch to the 2nd extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F200 E-{switch_extruder_retraction_amount}\nT0 ;Switch to the 1st extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..."
|
||||
},
|
||||
"machine_end_gcode": {
|
||||
"default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
|
||||
},
|
||||
"machine_extruder_count": {
|
||||
"default_value": 2
|
||||
},
|
||||
"prime_tower_position_x": {
|
||||
"value": "195"
|
||||
},
|
||||
"prime_tower_position_y": {
|
||||
"value": "149"
|
||||
}
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_name": { "default_value": "Ultimaker Original" },
|
||||
"machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F9000 ;move the platform down 15mm\nT1 ;Switch to the 2nd extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F200 E-{switch_extruder_retraction_amount}\nT0 ;Switch to the 1st extruder\nG92 E0 ;zero the extruded length\nG1 F200 E6 ;extrude 6 mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F9000\n;Put printing message on LCD screen\nM117 Printing..." },
|
||||
"machine_use_extruder_offset_to_offset_coords": { "default_value": true },
|
||||
"machine_width": { "default_value": 205 },
|
||||
"prime_tower_position_x": { "value": "195" },
|
||||
"prime_tower_position_y": { "value": "149" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,31 +2,25 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker Original+",
|
||||
"inherits": "ultimaker_original",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"weight": 4,
|
||||
"file_formats": "text/x-gcode",
|
||||
"platform": "ultimaker2_platform.obj",
|
||||
"firmware_file": "MarlinUltimaker-UMOP-{baudrate}.hex",
|
||||
"firmware_hbk_file": "MarlinUltimaker-UMOP-{baudrate}.hex",
|
||||
"first_start_actions": [ "BedLevel" ],
|
||||
"machine_extruder_trains": { "0": "ultimaker_original_plus_extruder_0" },
|
||||
"platform_texture": "UltimakerPlusbackplate.png",
|
||||
"quality_definition": "ultimaker_original",
|
||||
"first_start_actions": ["BedLevel"],
|
||||
"supported_actions": ["BedLevel"],
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker_original_plus_extruder_0"
|
||||
},
|
||||
"firmware_file": "MarlinUltimaker-UMOP-{baudrate}.hex",
|
||||
"firmware_hbk_file": "MarlinUltimaker-UMOP-{baudrate}.hex"
|
||||
"supported_actions": [ "BedLevel" ],
|
||||
"weight": 4
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker Original+" },
|
||||
"machine_heated_bed": {
|
||||
"default_value": true
|
||||
},
|
||||
"machine_max_feedrate_z": {
|
||||
"default_value": 30
|
||||
}
|
||||
"overrides":
|
||||
{
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_max_feedrate_z": { "default_value": 30 },
|
||||
"machine_name": { "default_value": "Ultimaker Original+" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,78 +2,53 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker S3",
|
||||
"inherits": "ultimaker",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"visible": true,
|
||||
"file_formats": "application/x-ufp;text/x-gcode",
|
||||
"platform": "ultimaker_s3_platform.obj",
|
||||
"platform_texture": "UltimakerS3backplate.png",
|
||||
"platform_offset": [0, 0, 0],
|
||||
"bom_numbers": [213482, 213483],
|
||||
"exclude_materials": [
|
||||
"generic_hips",
|
||||
"generic_petg",
|
||||
"structur3d_dap100silicone"
|
||||
],
|
||||
"firmware_update_info":
|
||||
{
|
||||
"check_urls": [ "https://software.ultimaker.com/releases/firmware/213482/stable/um-update.swu.version" ],
|
||||
"id": 213482,
|
||||
"update_url": "https://ultimaker.com/firmware?utm_source=cura&utm_medium=software&utm_campaign=fw-update"
|
||||
},
|
||||
"first_start_actions": [ "DiscoverUM3Action" ],
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"has_variant_buildplates": false,
|
||||
"has_variants": true,
|
||||
"exclude_materials": [ "generic_hips", "generic_petg", "structur3d_dap100silicone" ],
|
||||
"preferred_variant_name": "AA 0.4",
|
||||
"preferred_quality_type": "normal",
|
||||
"variants_name": "Print core",
|
||||
"nozzle_offsetting_for_disallowed_areas": false,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker_s3_extruder_left",
|
||||
"1": "ultimaker_s3_extruder_right"
|
||||
},
|
||||
"first_start_actions": [ "DiscoverUM3Action" ],
|
||||
"nozzle_offsetting_for_disallowed_areas": false,
|
||||
"platform_offset": [
|
||||
0,
|
||||
0,
|
||||
0
|
||||
],
|
||||
"platform_texture": "UltimakerS3backplate.png",
|
||||
"preferred_quality_type": "fast",
|
||||
"preferred_variant_name": "AA 0.4",
|
||||
"supported_actions": [ "DiscoverUM3Action" ],
|
||||
"supports_usb_connection": false,
|
||||
"supports_material_export": true,
|
||||
"weight": -1,
|
||||
"firmware_update_info": {
|
||||
"id": 213482,
|
||||
"check_urls": ["https://software.ultimaker.com/releases/firmware/213482/stable/um-update.swu.version"],
|
||||
"update_url": "https://ultimaker.com/firmware?utm_source=cura&utm_medium=software&utm_campaign=fw-update"
|
||||
},
|
||||
"bom_numbers": [
|
||||
213482, 213483
|
||||
]
|
||||
"supports_usb_connection": false,
|
||||
"variants_name": "Print core",
|
||||
"weight": -1
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker S3" },
|
||||
"machine_width": { "default_value": 230 },
|
||||
"machine_depth": { "default_value": 190 },
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_nozzle_heat_up_speed": { "default_value": 1.4 },
|
||||
"machine_nozzle_cool_down_speed": { "default_value": 0.8 },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value":
|
||||
[
|
||||
[ -41.4, -45.8 ],
|
||||
[ -41.4, 36.0 ],
|
||||
[ 63.3, 36.0 ],
|
||||
[ 63.3, -45.8 ]
|
||||
]
|
||||
},
|
||||
"machine_gcode_flavor": { "default_value": "Griffin" },
|
||||
"machine_max_feedrate_x": { "default_value": 300 },
|
||||
"machine_max_feedrate_y": { "default_value": 300 },
|
||||
"machine_max_feedrate_z": { "default_value": 40 },
|
||||
"machine_acceleration": { "default_value": 3000 },
|
||||
"gantry_height": { "value": "55" },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"extruder_prime_pos_abs": { "default_value": true },
|
||||
"machine_start_gcode": { "default_value": "" },
|
||||
"machine_end_gcode": { "default_value": "" },
|
||||
"prime_blob_enable": { "enabled": true, "default_value": false },
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_enabled": { "value": true },
|
||||
"speed_travel":
|
||||
{
|
||||
"maximum_value": "150",
|
||||
"value": "150"
|
||||
},
|
||||
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
"acceleration_print": { "value": "3500" },
|
||||
"acceleration_support": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
|
|
@ -85,30 +60,66 @@
|
|||
"cool_fan_speed": { "value": "50" },
|
||||
"cool_fan_speed_max": { "value": "100" },
|
||||
"cool_min_speed": { "value": "5" },
|
||||
"default_material_print_temperature": { "value": "200" },
|
||||
"extruder_prime_pos_abs": { "default_value": true },
|
||||
"gantry_height": { "value": "55" },
|
||||
"infill_overlap": { "value": "0" },
|
||||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"jerk_enabled": { "value": "True" },
|
||||
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
||||
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
||||
"machine_acceleration": { "default_value": 3000 },
|
||||
"machine_depth": { "default_value": 190 },
|
||||
"machine_end_gcode": { "default_value": "" },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"machine_gcode_flavor": { "default_value": "Griffin" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-41.4, -45.8],
|
||||
[-41.4, 36.0],
|
||||
[63.3, 36.0],
|
||||
[63.3, -45.8]
|
||||
]
|
||||
},
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_height": { "default_value": 200 },
|
||||
"machine_max_feedrate_x": { "default_value": 300 },
|
||||
"machine_max_feedrate_y": { "default_value": 300 },
|
||||
"machine_max_feedrate_z": { "default_value": 40 },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
"default_material_print_temperature": { "value": "200" },
|
||||
"machine_name": { "default_value": "Ultimaker S3" },
|
||||
"machine_nozzle_cool_down_speed": { "default_value": 0.8 },
|
||||
"machine_nozzle_heat_up_speed": { "default_value": 1.4 },
|
||||
"machine_start_gcode": { "default_value": "" },
|
||||
"machine_width": { "default_value": 230 },
|
||||
"multiple_mesh_overlap": { "value": "0" },
|
||||
"optimize_wall_printing_order": { "value": "True" },
|
||||
"prime_blob_enable":
|
||||
{
|
||||
"default_value": false,
|
||||
"enabled": true
|
||||
},
|
||||
"prime_tower_enable": { "value": "True" },
|
||||
"retraction_amount": { "value": "6.5" },
|
||||
"retraction_hop": { "value": "2" },
|
||||
"retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
|
||||
"retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
|
||||
"retraction_hop_only_when_collides": { "value": "True" },
|
||||
"retraction_min_travel": { "value": "5" },
|
||||
"retraction_prime_speed": { "value": "15" },
|
||||
"retraction_speed": {"value": "45" },
|
||||
"retraction_speed": { "value": "45" },
|
||||
"skin_overlap": { "value": "10" },
|
||||
"speed_prime_tower": { "value": "speed_topbottom" },
|
||||
"speed_print": { "value": "35" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
"speed_support_interface": { "value": "speed_topbottom" },
|
||||
"speed_topbottom": { "value": "math.ceil(speed_print * 20 / 35)" },
|
||||
"speed_travel":
|
||||
{
|
||||
"maximum_value": "150",
|
||||
"value": "150"
|
||||
},
|
||||
"speed_wall": { "value": "math.ceil(speed_print * 30 / 35)" },
|
||||
"speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" },
|
||||
"speed_wall_x": { "value": "speed_wall" },
|
||||
|
|
@ -120,4 +131,4 @@
|
|||
"wall_0_inset": { "value": "0" },
|
||||
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -2,80 +2,53 @@
|
|||
"version": 2,
|
||||
"name": "Ultimaker S5",
|
||||
"inherits": "ultimaker",
|
||||
"metadata": {
|
||||
"metadata":
|
||||
{
|
||||
"visible": true,
|
||||
"author": "Ultimaker",
|
||||
"manufacturer": "Ultimaker B.V.",
|
||||
"visible": true,
|
||||
"file_formats": "application/x-ufp;text/x-gcode",
|
||||
"platform": "ultimaker_s5_platform.obj",
|
||||
"platform_texture": "UltimakerS5backplate.png",
|
||||
"platform_offset": [0, -30, -10],
|
||||
"bom_numbers": [
|
||||
9051,
|
||||
214475,
|
||||
214476
|
||||
],
|
||||
"firmware_update_info":
|
||||
{
|
||||
"check_urls": [ "https://software.ultimaker.com/releases/firmware/9051/stable/um-update.swu.version" ],
|
||||
"id": 9051,
|
||||
"update_url": "https://ultimaker.com/firmware?utm_source=cura&utm_medium=software&utm_campaign=fw-update"
|
||||
},
|
||||
"first_start_actions": [ "DiscoverUM3Action" ],
|
||||
"has_machine_quality": true,
|
||||
"has_materials": true,
|
||||
"has_variant_buildplates": true,
|
||||
"has_variants": true,
|
||||
"preferred_variant_name": "AA 0.4",
|
||||
"preferred_variant_buildplate_name": "Glass",
|
||||
"preferred_quality_type": "normal",
|
||||
"variants_name": "Print core",
|
||||
"nozzle_offsetting_for_disallowed_areas": false,
|
||||
"machine_extruder_trains":
|
||||
{
|
||||
"0": "ultimaker_s5_extruder_left",
|
||||
"1": "ultimaker_s5_extruder_right"
|
||||
},
|
||||
"first_start_actions": [ "DiscoverUM3Action" ],
|
||||
"nozzle_offsetting_for_disallowed_areas": false,
|
||||
"platform_offset": [
|
||||
0,
|
||||
-30,
|
||||
-10
|
||||
],
|
||||
"platform_texture": "UltimakerS5backplate.png",
|
||||
"preferred_quality_type": "fast",
|
||||
"preferred_variant_buildplate_name": "Glass",
|
||||
"preferred_variant_name": "AA 0.4",
|
||||
"supported_actions": [ "DiscoverUM3Action" ],
|
||||
"supports_usb_connection": false,
|
||||
"supports_network_connection": true,
|
||||
"supports_material_export": true,
|
||||
"weight": -2,
|
||||
"firmware_update_info": {
|
||||
"id": 9051,
|
||||
"check_urls": ["https://software.ultimaker.com/releases/firmware/9051/stable/um-update.swu.version"],
|
||||
"update_url": "https://ultimaker.com/firmware?utm_source=cura&utm_medium=software&utm_campaign=fw-update"
|
||||
},
|
||||
"bom_numbers": [
|
||||
9051, 214475, 214476
|
||||
]
|
||||
"supports_network_connection": true,
|
||||
"supports_usb_connection": false,
|
||||
"variants_name": "Print core",
|
||||
"weight": -2
|
||||
},
|
||||
|
||||
"overrides": {
|
||||
"machine_name": { "default_value": "Ultimaker S5" },
|
||||
"machine_width": { "default_value": 330 },
|
||||
"machine_depth": { "default_value": 240 },
|
||||
"machine_height": { "default_value": 300 },
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_heated_build_volume": { "default_value": true },
|
||||
"machine_nozzle_heat_up_speed": { "default_value": 1.4 },
|
||||
"machine_nozzle_cool_down_speed": { "default_value": 0.8 },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value":
|
||||
[
|
||||
[ -41.4, -45.8 ],
|
||||
[ -41.4, 36.0 ],
|
||||
[ 63.3, 36.0 ],
|
||||
[ 63.3, -45.8 ]
|
||||
]
|
||||
},
|
||||
"machine_gcode_flavor": { "default_value": "Griffin" },
|
||||
"machine_max_feedrate_x": { "default_value": 300 },
|
||||
"machine_max_feedrate_y": { "default_value": 300 },
|
||||
"machine_max_feedrate_z": { "default_value": 40 },
|
||||
"machine_acceleration": { "default_value": 3000 },
|
||||
"gantry_height": { "value": "55" },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"extruder_prime_pos_abs": { "default_value": true },
|
||||
"machine_start_gcode": { "default_value": "" },
|
||||
"machine_end_gcode": { "default_value": "" },
|
||||
"prime_blob_enable": { "enabled": true, "default_value": false },
|
||||
|
||||
"speed_travel":
|
||||
{
|
||||
"maximum_value": "150",
|
||||
"value": "150"
|
||||
},
|
||||
"overrides":
|
||||
{
|
||||
"acceleration_enabled": { "value": true },
|
||||
"acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 3500)" },
|
||||
"acceleration_print": { "value": "3500" },
|
||||
|
|
@ -85,33 +58,72 @@
|
|||
"acceleration_wall": { "value": "math.ceil(acceleration_print * 1500 / 3500)" },
|
||||
"acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" },
|
||||
"brim_width": { "value": "3" },
|
||||
"build_volume_temperature": { "maximum_value": 50 },
|
||||
"cool_fan_speed": { "value": "50" },
|
||||
"cool_fan_speed_max": { "value": "100" },
|
||||
"cool_min_speed": { "value": "5" },
|
||||
"default_material_print_temperature": { "value": "200" },
|
||||
"extruder_prime_pos_abs": { "default_value": true },
|
||||
"gantry_height": { "value": "55" },
|
||||
"infill_overlap": { "value": "0" },
|
||||
"infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'triangles'" },
|
||||
"infill_wipe_dist": { "value": "0" },
|
||||
"jerk_enabled": { "value": "True" },
|
||||
"layer_start_x": { "value": "sum(extruderValues('machine_extruder_start_pos_x')) / len(extruderValues('machine_extruder_start_pos_x'))" },
|
||||
"layer_start_y": { "value": "sum(extruderValues('machine_extruder_start_pos_y')) / len(extruderValues('machine_extruder_start_pos_y'))" },
|
||||
"machine_acceleration": { "default_value": 3000 },
|
||||
"machine_depth": { "default_value": 240 },
|
||||
"machine_end_gcode": { "default_value": "" },
|
||||
"machine_extruder_count": { "default_value": 2 },
|
||||
"machine_gcode_flavor": { "default_value": "Griffin" },
|
||||
"machine_head_with_fans_polygon":
|
||||
{
|
||||
"default_value": [
|
||||
[-41.4, -45.8],
|
||||
[-41.4, 36.0],
|
||||
[63.3, 36.0],
|
||||
[63.3, -45.8]
|
||||
]
|
||||
},
|
||||
"machine_heated_bed": { "default_value": true },
|
||||
"machine_heated_build_volume": { "default_value": true },
|
||||
"machine_height": { "default_value": 300 },
|
||||
"machine_max_feedrate_x": { "default_value": 300 },
|
||||
"machine_max_feedrate_y": { "default_value": 300 },
|
||||
"machine_max_feedrate_z": { "default_value": 40 },
|
||||
"machine_min_cool_heat_time_window": { "value": "15" },
|
||||
"default_material_print_temperature": { "value": "200" },
|
||||
"machine_name": { "default_value": "Ultimaker S5" },
|
||||
"machine_nozzle_cool_down_speed": { "default_value": 0.8 },
|
||||
"machine_nozzle_heat_up_speed": { "default_value": 1.4 },
|
||||
"machine_start_gcode": { "default_value": "" },
|
||||
"machine_width": { "default_value": 330 },
|
||||
"multiple_mesh_overlap": { "value": "0" },
|
||||
"optimize_wall_printing_order": { "value": "True" },
|
||||
"prime_blob_enable":
|
||||
{
|
||||
"default_value": false,
|
||||
"enabled": true
|
||||
},
|
||||
"prime_tower_enable": { "value": "True" },
|
||||
"retraction_amount": { "value": "6.5" },
|
||||
"retraction_combing": { "value": "'no_outer_surfaces'"},
|
||||
"retraction_combing": { "value": "'no_outer_surfaces'" },
|
||||
"retraction_hop": { "value": "2" },
|
||||
"retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
|
||||
"retraction_hop_enabled": { "value": "extruders_enabled_count > 1" },
|
||||
"retraction_hop_only_when_collides": { "value": "True" },
|
||||
"retraction_min_travel": { "value": "5" },
|
||||
"retraction_prime_speed": { "value": "15" },
|
||||
"retraction_speed": {"value": "45" },
|
||||
"retraction_speed": { "value": "45" },
|
||||
"skin_overlap": { "value": "10" },
|
||||
"speed_prime_tower": { "value": "speed_topbottom" },
|
||||
"speed_print": { "value": "35" },
|
||||
"speed_support": { "value": "speed_wall_0" },
|
||||
"speed_support_interface": { "value": "speed_topbottom" },
|
||||
"speed_topbottom": { "value": "math.ceil(speed_print * 20 / 35)" },
|
||||
"speed_travel":
|
||||
{
|
||||
"maximum_value": "150",
|
||||
"value": "150"
|
||||
},
|
||||
"speed_wall": { "value": "math.ceil(speed_print * 30 / 35)" },
|
||||
"speed_wall_0": { "value": "math.ceil(speed_wall * 20 / 30)" },
|
||||
"speed_wall_x": { "value": "speed_wall" },
|
||||
|
|
@ -121,8 +133,6 @@
|
|||
"top_bottom_thickness": { "value": "1" },
|
||||
"travel_avoid_distance": { "value": "3 if extruders_enabled_count > 1 else machine_nozzle_tip_outer_diameter / 2 * 1.5" },
|
||||
"wall_0_inset": { "value": "0" },
|
||||
"optimize_wall_printing_order": { "value": "True" },
|
||||
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" },
|
||||
"build_volume_temperature": { "maximum_value": 50 }
|
||||
"zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
|
||||
}
|
||||
}
|
||||
}
|
||||
Loading…
Add table
Add a link
Reference in a new issue