PrinterBot Simple Metal heated bed upgraded X&Z

PrinterBot Simple Metal heated bed upgraded X&Z
volume
x=250mm
y=150mm
z=235mm(due to handle conflict with z- axis)

resources/definitions/printrbot_simple_extended.def.json

@@ -0,0 +1,44 @@
+{
+    "id": "printrbot_simple_extended",
+    "version": 2, 
+    "name": "Printrbot Simple Metal Extended",
+    "inherits": "fdmprinter",
+    "metadata": {
+        "visible": true,
+        "author": "Calvindog717",
+        "manufacturer": "PrintrBot",
+        "category": "Other",
+        "platform": "printrbot_simple_metal_platform_extend.stl",
+        "file_formats": "text/x-gcode"
+    },
+
+    "overrides": {
+        "machine_name": { "default_value": "Printrbot Simple Metal Extended" },
+        "machine_heated_bed": { "default_value": true },
+        "machine_width": { "default_value": 250 },
+        "machine_height": { "default_value": 235 },
+        "machine_depth": { "default_value": 150 },
+        "machine_center_is_zero": { "default_value": false },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 },
+        "machine_nozzle_heat_up_speed": { "default_value": 2 },
+        "machine_nozzle_cool_down_speed": { "default_value": 2 },
+        "machine_head_with_fans_polygon": {
+            "default_value": [
+                [ 55, -20 ],
+                [ 55, 99999 ],
+                [ -49, 99999 ],
+                [ -49, -20 ]
+            ]
+        },
+        "gantry_height": { "default_value": 99999 },
+        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
+
+        "machine_start_gcode": {
+            "default_value": "G21       ;metric values\nG90       ;absolute positioning\nM82       ;set extruder to absolute mode\nM107      ;start with the fan off\nG28 X0 Y0 ;home X/Y\nG28 Z0    ;home Z\nG92 E0    ;zero the extruded length\nG29       ;initiate auto bed leveling sequence\nG92 X132.4 Y20 ;correct bed origin (G29 changes it)"
+        },
+        "machine_end_gcode": {
+            "default_value": "M104 S0     ;extruder heater off\nM140 S0     ;heated bed heater off (if you have it)\nM106 S0     ;fan off\nG91         ;relative positioning\nG1 E-1 F300 ;retract the filament a bit\nG1 Z+1 E-5 F9000 ;move Z up a bit and retract even more\nG28 X0 Y0   ;home X/Y, so the head is out of the way\nM84         ;steppers off\nG90         ;absolute positioning"
+        }
+    }
+}