Merge branch 'master' of https://github.com/heed818/Cura

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS-X_A.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_absx
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 19 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS-X_B.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_absx
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 96
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS-X_C.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_absx
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 91
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS_A.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_abs
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 19 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature + 1
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 100
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS_B.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_abs
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 1
+material_flow = 96
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ABS_C.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_abs
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature +3
+material_flow = 91
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ACETATE_A.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_acetate
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 37/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/37)
+speed_topbottom = =math.ceil(speed_print * 33/50)
+speed_layer_0 = =math.ceil(speed_print * 25/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 10 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 98
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ACETATE_B.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_acetate
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 40/55)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 27/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 7 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 2
+material_print_temperature_layer_0 = =default_material_print_temperature + 0
+material_flow = 95
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ACETATE_C.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_acetate
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 45/60)
+speed_wall_0 = =math.ceil(speed_wall * 33/45)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 35
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 5 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 93
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ASA-X_A.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_asax
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 19 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature + 1
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 100
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ASA-X_B.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_asax
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 96
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_ASA-X_C.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_asax
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 40
+cool_fan_speed_max = 75
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 7
+material_flow = 91
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_A.inst.cfg

@@ -0,0 +1,62 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_copa
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+cool_lift_head = True
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 8
+bridge_wall_material_flow = 50
+bridge_skin_speed = 8
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04

resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_B.inst.cfg

@@ -0,0 +1,62 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_copa
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+cool_lift_head = True
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 8
+bridge_wall_material_flow = 50
+bridge_skin_speed = 8
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04

resources/quality/strateo3d/HT0.4/s3d_ht0.4_COPA_C.inst.cfg

@@ -0,0 +1,62 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_copa
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 20
+cool_fan_speed_max = 80
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 2
+cool_lift_head = True
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 8
+bridge_wall_material_flow = 50
+bridge_skin_speed = 8
+bridge_skin_material_flow = 60
+bridge_skin_density = 80
+bridge_fan_speed = 80
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04

resources/quality/strateo3d/HT0.4/s3d_ht0.4_HIPS_A.inst.cfg

@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_hips
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 14 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_HIPS_B.inst.cfg

@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_hips
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 9 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_HIPS_C.inst.cfg

@@ -0,0 +1,50 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_hips
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 30/40)
+speed_wall_0 = =math.ceil(speed_wall * 30/40)
+speed_topbottom = =math.ceil(speed_print * 20/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 97
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_bottom_stair_step_height = 0
+support_bottom_stair_step_width = 0
+support_z_distance = =layer_height-layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 0.5
+support_xy_distance_overhang = =line_width*0
+support_offset = 3
+support_pattern = grid
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PC_A.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_pc
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 10
+cool_fan_speed_max = 10
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 12
+support_angle = 60
+cool_lift_head = true
+material_print_temperature = 260
+material_print_temperature_layer_0 = 265
+material_flow = 88
+wall_line_count = 3
+retraction_extra_prime_amount = 0.1
+retraction_speed = 30
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+adhesion_type = brim
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 12
+bridge_wall_material_flow = 50
+bridge_skin_speed = 12.5
+bridge_skin_material_flow = 100
+bridge_skin_density = 80
+bridge_fan_speed = 100
+

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PC_B.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_pc
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 10
+cool_fan_speed_max = 10
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 12
+cool_lift_head = true
+support_angle = 60
+material_print_temperature = 270
+material_print_temperature_layer_0 = 275
+material_flow = 88
+wall_line_count = 3
+retraction_speed = 30
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+
+adhesion_type = brim
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 12
+bridge_wall_material_flow = 50
+bridge_skin_speed = 12.5
+bridge_skin_material_flow = 100
+bridge_skin_density = 80
+bridge_fan_speed = 100

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PC_C.inst.cfg

@@ -0,0 +1,61 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_pc
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 10
+cool_fan_speed_max = 10
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 12
+support_angle = 60
+cool_lift_head = true
+material_print_temperature = 270
+material_print_temperature_layer_0 = 275
+material_flow = 88
+wall_line_count = 3
+retraction_speed = 30
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+
+adhesion_type = brim
+
+bridge_settings_enabled = True
+bridge_wall_coast = 50
+bridge_wall_speed = 12
+bridge_wall_material_flow = 50
+bridge_skin_speed = 12.5
+bridge_skin_material_flow = 100
+bridge_skin_density = 80
+bridge_fan_speed = 100

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PEKK_B.inst.cfg

@@ -0,0 +1,58 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_pekk
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+initial_layer_line_width_factor = 120
+material_flow_layer_0 = 120
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = 10
+speed_travel_layer_0 = 100
+skirt_brim_speed = 5
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 30
+cool_fan_speed_max = 30
+cool_min_layer_time_fan_speed_max = 10
+cool_min_layer_time = 11
+cool_fan_full_layer = 2
+cool_min_speed = 5
+support_angle = 45
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 15
+material_flow = 105
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height
+support_bottom_distance = =support_z_distance
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 105
+prime_tower_enable = True
+bridge_settings_enabled = True
+bridge_wall_speed = 5
+bridge_wall_material_flow = 185
+bridge_skin_speed = =bridge_wall_speed
+bridge_skin_material_flow = =bridge_wall_material_flow
+bridge_fan_speed = 100
+bridge_enable_more_layers = False

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PETG_A.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_petg
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 98
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PETG_B.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_petg
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 95
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PETG_C.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_petg
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 3 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature +5
+material_flow = 91
+retraction_extra_prime_amount = 0
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_A.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_pla
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 50
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 65
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature -5
+material_flow = 98
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_B.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_pla
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 55
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 60
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 95
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_C.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_pla
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 60
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 10
+support_angle = 55
+material_print_temperature = =default_material_print_temperature + 10
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_flow = 91
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_HT_A.inst.cfg

@@ -0,0 +1,55 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_pla_hr_870
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+wall_line_count = 3
+speed_print = 30
+speed_wall = =math.ceil(speed_print * 35/50)
+speed_wall_0 = =math.ceil(speed_wall * 30/35)
+speed_topbottom = =math.ceil(speed_print * 35/50)
+speed_layer_0 = =math.ceil(speed_print * 20/50)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 4
+support_angle = 65
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature + 10
+material_initial_print_temperature = =default_material_print_temperature + 5
+material_final_print_temperature = =default_material_print_temperature + 5
+material_flow = 91
+skin_material_flow = 92
+retraction_amount = 2
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 10
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_HT_B.inst.cfg

@@ -0,0 +1,54 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_pla_hr_870
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 37/55)
+speed_wall_0 = =math.ceil(speed_wall * 33/37)
+speed_topbottom = =math.ceil(speed_print * 37/55)
+speed_layer_0 = =math.ceil(speed_print * 25/55)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 4
+support_angle = 60
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_amount = 2
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 15
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_PLA_HT_C.inst.cfg

@@ -0,0 +1,54 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_pla_hr_870
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.4
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.35
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.3
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 40/60)
+speed_wall_0 = =math.ceil(speed_wall * 35/40)
+speed_topbottom = =math.ceil(speed_print * 40/60)
+speed_layer_0 = =math.ceil(speed_print * 30/60)
+speed_slowdown_layers = 2
+cool_fan_enabled = True
+cool_fan_speed = 100
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 2
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_min_speed = 4
+support_angle = 55
+material_print_temperature = =default_material_print_temperature
+material_print_temperature_layer_0 = =default_material_print_temperature + 5
+material_initial_print_temperature = =default_material_print_temperature
+material_final_print_temperature = =default_material_print_temperature
+material_flow = 91
+skin_material_flow = 92
+retraction_amount = 2
+retraction_extra_prime_amount = 0.1
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = True
+skin_overlap = 20
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 1.7
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 1
+support_interface_density = 100
+prime_tower_enable = True
+meshfix_maximum_resolution = 0.5
+meshfix_maximum_deviation = 0.04
+cool_lift_head = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_TPU98A_A.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = A
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = a
+weight = 1
+material = emotiontech_tpu98a
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.5*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 30
+speed_wall = =math.ceil(speed_print * 30/30)
+speed_wall_0 = =math.ceil(speed_print * 25/30)
+speed_topbottom = =math.ceil(speed_print * 25/30)
+speed_layer_0 = =math.ceil(speed_print * 20/30)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 3
+material_print_temperature_layer_0 = =default_material_print_temperature - 3
+material_flow = 107
+retraction_extra_prime_amount = 0.2
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.5
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_TPU98A_B.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = B
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = b
+weight = 0
+material = emotiontech_tpu98a
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.67*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 35
+speed_wall = =math.ceil(speed_print * 35/35)
+speed_wall_0 = =math.ceil(speed_print * 27/35)
+speed_topbottom = =math.ceil(speed_print * 25/35)
+speed_layer_0 = =math.ceil(speed_print * 20/35)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 5
+material_print_temperature_layer_0 = =default_material_print_temperature
+material_flow = 103
+retraction_extra_prime_amount = 0.2
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.5
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/strateo3d/HT0.4/s3d_ht0.4_TPU98A_C.inst.cfg

@@ -0,0 +1,47 @@
+[general]
+version = 4
+name = C
+definition = strateo3d
+
+[metadata]
+setting_version = 17
+type = quality
+quality_type = c
+weight = -1
+material = emotiontech_tpu98a
+variant = High temp 0.4
+
+[values]
+layer_height_0 = =round(0.75*machine_nozzle_size, 2)
+line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_line_width = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_line_width_x = =machine_nozzle_size/machine_nozzle_size*0.38
+wall_0_wipe_dist = =machine_nozzle_size/2
+speed_print = 40
+speed_wall = =math.ceil(speed_print * 40/40)
+speed_wall_0 = =math.ceil(speed_print * 30/40)
+speed_topbottom = =math.ceil(speed_print * 27/40)
+speed_layer_0 = =math.ceil(speed_print * 20/40)
+speed_slowdown_layers = 1
+cool_fan_enabled = True
+cool_fan_speed = 50
+cool_fan_speed_max = 100
+cool_min_layer_time_fan_speed_max = 20
+cool_min_layer_time = 11
+cool_fan_full_at_height = =layer_height_0 + 4 * layer_height
+cool_min_speed = 10
+support_angle = 50
+material_print_temperature = =default_material_print_temperature + 7
+material_print_temperature_layer_0 = =default_material_print_temperature + 3
+material_flow = 101
+retraction_extra_prime_amount = 0.2
+retraction_min_travel = =3*line_width
+retraction_hop_only_when_collides = False
+skin_overlap = 5
+support_z_distance = =layer_height*2
+support_bottom_distance = =support_z_distance*0.5
+support_xy_distance = =line_width * 2.5
+support_xy_distance_overhang = =wall_line_width_0
+support_offset = 0.5
+support_interface_density = 100
+prime_tower_enable = True

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.25_normal.inst.cfg

@@ -21,4 +21,4 @@ speed_layer_0 = 30
 speed_print = 30
 top_bottom_thickness = 0.72
 wall_thickness = 0.88
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_draft.inst.cfg

@@ -27,4 +27,4 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 speed_infill = =math.ceil(speed_print * 45 / 45)
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_fast.inst.cfg

@@ -27,4 +27,4 @@ speed_wall_0 = =math.ceil(speed_print * 30 / 45)
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall_x = =math.ceil(speed_print * 40 / 45)
 speed_infill = =math.ceil(speed_print * 45 / 45)
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.4_normal.inst.cfg

@@ -22,4 +22,4 @@ speed_print = 45
 speed_wall = =math.ceil(speed_print * 30 / 45)
 top_bottom_thickness = 0.8
 wall_thickness = 1.05
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.6_normal.inst.cfg

@@ -21,4 +21,4 @@ speed_layer_0 = 30
 speed_print = 40
 top_bottom_thickness = 1.2
 wall_thickness = 1.59
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8

resources/quality/ultimaker2_plus_connect/um2pc_petg_0.8_normal.inst.cfg

@@ -21,4 +21,4 @@ speed_layer_0 = 30
 speed_print = 40
 top_bottom_thickness = 1.2
 wall_thickness = 2.1
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8

resources/quality/ultimaker3/um3_aa0.25_PETG_Normal_Quality.inst.cfg

@@ -18,5 +18,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 55)
 top_bottom_thickness = 0.8
 wall_thickness = 0.92
 material_print_temperature = =default_material_print_temperature - 5
-retraction_combing_max_distance = 40
+retraction_combing_max_distance = 8
 retraction_combing = all

resources/quality/ultimaker3/um3_aa0.4_PETG_Draft_Print.inst.cfg

@@ -23,5 +23,5 @@ speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)
 wall_thickness = 1
-retraction_combing_max_distance = 40
+retraction_combing_max_distance = 8
 retraction_combing = all

resources/quality/ultimaker3/um3_aa0.4_PETG_Fast_Print.inst.cfg

@@ -23,5 +23,5 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
 speed_infill = =math.ceil(speed_print * 50 / 60)
-retraction_combing_max_distance = 40
+retraction_combing_max_distance = 8
 retraction_combing = all

resources/quality/ultimaker3/um3_aa0.4_PETG_Normal_Quality.inst.cfg

@@ -23,5 +23,5 @@ speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
 speed_infill = =math.ceil(speed_print * 45 / 55)
-retraction_combing_max_distance = 40
+retraction_combing_max_distance = 8
 retraction_combing = all

resources/quality/ultimaker3/um3_aa0.8_PETG_Draft_Print.inst.cfg

@@ -20,5 +20,5 @@ prime_tower_enable = True
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-retraction_combing_max_distance = 40
+retraction_combing_max_distance = 8
 retraction_combing = all

resources/quality/ultimaker3/um3_aa0.8_PETG_Superdraft_Print.inst.cfg

@@ -22,5 +22,5 @@ speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)
-retraction_combing_max_distance = 40
+retraction_combing_max_distance = 8
 retraction_combing = all

resources/quality/ultimaker3/um3_aa0.8_PETG_Verydraft_Print.inst.cfg

@@ -21,5 +21,5 @@ prime_tower_enable = True
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)
-retraction_combing_max_distance = 40
+retraction_combing_max_distance = 8
 retraction_combing = all

resources/quality/ultimaker_s3/um_s3_aa0.25_PETG_Normal_Quality.inst.cfg

@@ -12,7 +12,7 @@ material = generic_petg
 variant = AA 0.25
 
 [values]
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Draft_Print.inst.cfg

@@ -15,7 +15,7 @@ variant = AA 0.4
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature - 5
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 skin_overlap = 20
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Fast_Print.inst.cfg

@@ -16,7 +16,7 @@ cool_min_speed = 7
 material_print_temperature = =default_material_print_temperature
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 30 / 60)

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_High_Quality.inst.cfg

@@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 10
 material_final_print_temperature = =material_print_temperature - 15
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_topbottom = =math.ceil(speed_print * 30 / 50)

resources/quality/ultimaker_s3/um_s3_aa0.4_PETG_Normal_Quality.inst.cfg

@@ -17,7 +17,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 10
 material_final_print_temperature = =material_print_temperature - 15
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)

resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Draft_Print.inst.cfg

@@ -17,7 +17,7 @@ line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg

@@ -17,7 +17,7 @@ line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)

resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Verydraft_Print.inst.cfg

@@ -17,7 +17,7 @@ line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker_s5/um_s5_aa0.25_PETG_Normal_Quality.inst.cfg

@@ -12,7 +12,7 @@ material = generic_petg
 variant = AA 0.25
 
 [values]
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 retraction_extrusion_window = 0.5
 speed_infill = =math.ceil(speed_print * 40 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Draft_Print.inst.cfg

@@ -15,7 +15,7 @@ variant = AA 0.4
 material_print_temperature = =default_material_print_temperature + 5
 material_initial_print_temperature = =material_print_temperature
 material_final_print_temperature = =material_print_temperature - 5
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 skin_edge_support_thickness = =0.8 if infill_sparse_density < 30 else 0
 skin_overlap = 20
 speed_print = 60

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Fast_Print.inst.cfg

@@ -16,7 +16,7 @@ cool_min_speed = 7
 material_print_temperature = =default_material_print_temperature
 material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 60
 speed_layer_0 = =math.ceil(speed_print * 20 / 60)
 speed_topbottom = =math.ceil(speed_print * 30 / 60)

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_High_Quality.inst.cfg

@@ -18,7 +18,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 10
 material_initial_print_temperature = =material_print_temperature - 10
 material_final_print_temperature = =material_print_temperature - 15
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 50
 speed_layer_0 = =math.ceil(speed_print * 20 / 50)
 speed_topbottom = =math.ceil(speed_print * 30 / 50)

resources/quality/ultimaker_s5/um_s5_aa0.4_PETG_Normal_Quality.inst.cfg

@@ -17,7 +17,7 @@ machine_nozzle_heat_up_speed = 1.5
 material_print_temperature = =default_material_print_temperature - 5
 material_initial_print_temperature = =material_print_temperature - 10
 material_final_print_temperature = =material_print_temperature - 15
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 55
 speed_layer_0 = =math.ceil(speed_print * 20 / 55)
 speed_topbottom = =math.ceil(speed_print * 30 / 55)

resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Draft_Print.inst.cfg

@@ -17,7 +17,7 @@ line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)

resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg

@@ -17,7 +17,7 @@ line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 45
 speed_topbottom = =math.ceil(speed_print * 30 / 45)
 speed_wall = =math.ceil(speed_print * 40 / 45)

resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Verydraft_Print.inst.cfg

@@ -17,7 +17,7 @@ line_width = =machine_nozzle_size * 0.875
 material_print_temperature = =default_material_print_temperature - 5
 material_standby_temperature = 100
 prime_tower_enable = True
-retraction_combing_max_distance = 50
+retraction_combing_max_distance = 8
 speed_print = 40
 speed_topbottom = =math.ceil(speed_print * 25 / 40)
 speed_wall = =math.ceil(speed_print * 30 / 40)