fix: import creawsome definitions

resources/definitions/creawsome_base.def.json

@@ -0,0 +1,158 @@
+{
+    "id": "creawsome_base",
+    "name": "Custom Machine",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10" },
+        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"},
+        "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
+
+        "machine_max_feedrate_x": { "value": 500 },
+        "machine_max_feedrate_y": { "value": 500 },
+        "machine_max_feedrate_z": { "value": 5 },
+        "machine_max_feedrate_e": { "value": 50 },
+
+        "machine_max_acceleration_x": { "value": 500 },
+        "machine_max_acceleration_Y": { "value": 500 },
+        "machine_max_acceleration_z": { "value": 100 },
+        "machine_max_acceleration_e": { "value": 5000 },
+        "machine_acceleration": { "value": 500 },
+
+        "machine_max_jerk_xy": { "value": 10 },
+        "machine_max_jerk_z": { "value": 0.4 },
+        "machine_max_jerk_e": { "value": 5 },
+
+        "machine_heated_bed": { "default_value": true },
+
+        "material_diameter": { "default_value": 1.75 },
+
+        "acceleration_print": { "value": 500 },
+        "acceleration_travel": { "value": 500 },
+        "acceleration_travel_layer_0": { "value": "acceleration_travel" },
+        "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
+
+        "jerk_print": { "value": 8 },
+        "jerk_travel": { "value": "jerk_print" },
+        "jerk_travel_layer_0": { "value": "jerk_travel" },
+
+        "acceleration_enabled": { "value": false },
+        "jerk_enabled": { "value": false },
+
+        "speed_print": { "value": 50.0 } ,
+        "speed_infill": { "value": "speed_print" },
+        "speed_wall": { "value": "speed_print / 2" },
+        "speed_wall_0": { "value": "speed_wall" },
+        "speed_wall_x": { "value": "speed_wall" },
+        "speed_topbottom": { "value": "speed_print / 2" },
+        "speed_roofing": { "value": "speed_topbottom" },
+        "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
+        "speed_layer_0": { "value": 20.0 },
+        "speed_print_layer_0": { "value": "speed_layer_0" },
+        "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
+        "speed_prime_tower": { "value": "speed_topbottom" },
+        "speed_support": { "value": "speed_wall_0" },
+        "speed_support_interface": { "value": "speed_topbottom" },
+
+        "skirt_brim_speed": { "value": "speed_layer_0" },
+
+        "line_width": { "value": "machine_nozzle_size * 1.25"},
+
+        "material_initial_print_temperature": { "value": "material_print_temperature"},
+        "material_final_print_temperature": { "value": "material_print_temperature"},
+        "material_flow": { "value": 100},
+
+        "z_seam_type": { "value": "'back'"},
+        "z_seam_corner": { "value": "'z_seam_corner_none'"},
+        
+        "infill_before_walls": { "value": false },
+        "infill_overlap": { "value": 30.0 },
+        "skin_overlap": { "value": 10.0 },
+        "infill_wipe_dist": { "value": 0.0 },
+
+        "retraction_speed": {
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+            "maximum_value": 200
+        },
+        "retraction_retract_speed": {
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+            "maximum_value": 200
+        },
+        "retraction_prime_speed": {
+            "maximum_value_warning": "machine_max_feedrate_e if retraction_enable else float('inf')",
+            "maximum_value": 200
+        },
+        "retraction_combing": { "value": "'off'"},
+        "retraction_enable": { "value": true },
+        "retraction_count_max": { "value": 100 },
+        "retraction_extrusion_window": { "value": 10 },
+        "retraction_min_travel": { "value": 1.5 },
+        "retraction_hop_enabled": { "value": true },
+        "retraction_hop": { "value": 0.2 },
+
+        "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
+        "cool_fan_enabled": { "value": true },
+        "cool_min_layer_time": { "value": 10 },
+
+        "adhesion_type": { "value": "'none' if support_enable else 'skirt'" },
+        "brim_replaces_support": { "value": false},
+        "skirt_gap": { "value": 10.0 },
+        "skirt_line_count": { "value": 4 },
+
+        "adaptive_layer_height_variation": { "value": 0.04},
+        "adaptive_layer_height_variation_step": { "value": 0.04 },
+
+        "meshfix_maximum_resolution": { "value": "0.05" },
+        "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
+
+        "support_type": { "value": "'buildplate'"},
+        "support_angle": { "value": 65 },
+        "support_pattern": { "value": "'zigzag'" },
+        "support_infill_rate": { "value": "0 if support_tree_enable else 20" },
+        "support_use_towers": { "value": false },
+        "support_xy_distance": { "value": "wall_line_width_0 * 2" },
+        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
+        "support_z_distance": { "value": "layer_height if layer_height >= 0.16 else layer_height*2" },
+        "support_wall_count": { "value": 1},
+        "support_brim_enable": { "value": true},
+        "support_brim_width": { "value": 4},
+
+        "support_interface_enable": { "value": true },
+        "support_interface_height": { "value": "layer_height * 4" },
+        "support_interface_density": { "value": 33.333 },
+        "support_interface_pattern": { "value": "'grid'" },
+        "support_interface_skip_height": { "value": 0.2},
+        "minimum_support_area": { "value": 10},
+        "minimum_interface_area": { "value": 10}
+
+    },
+    "metadata": {
+        "visible": true,
+        "author": "trouch.com",
+        "manufacturer": "CreawsomeMod",
+        "category": "CreawsomeMod",
+        "file_formats": "text/x-gcode",
+        "first_start_actions": ["MachineSettingsAction"],
+
+        "machine_extruder_trains": {
+            "0": "creawsome_base_extruder_0"
+        },
+
+        "has_materials": true,
+        "has_variants": true,
+        "has_machine_quality": true,
+        "has_machine_materials": true,
+        "variants_name": "Nozzle Size",
+
+        "preferred_variant_name": "0.4mm Nozzle",
+        "preferred_quality_type": "standard",
+        "preferred_material": "generic_pla",
+        "exclude_materials": [
+            "generic_cpe","generic_cpe_175",
+            "generic_hips","generic_hips_175",
+            "generic_nylon","generic_nylon_175",
+            "generic_pc","generic_pc_175",
+            "generic_pva","generic_pva_175"
+        ]
+    }
+}

resources/definitions/creawsome_cr10.def.json

@@ -0,0 +1,26 @@
+{
+    "id": "creawsome_cr10",
+    "name": "Creality CR-10",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10" },
+        "machine_width": { "default_value": 300 },
+        "machine_depth": { "default_value": 300 },
+        "machine_height": { "default_value": 400 },
+        "machine_head_polygon": { "default_value": [
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
+                [30, 34]
+            ]
+        },
+
+        "gantry_height": { "default_value": 30 }
+
+    },
+    "metadata": {
+        "platform": "creawsome_cr10s_printerhd.stl",
+        "platform_offset": [ -150, 0, 155]
+    }
+}

resources/definitions/creawsome_cr10mini.def.json

@@ -0,0 +1,25 @@
+{
+    "id": "creawsome_cr10mini",
+    "name": "Creality CR-10 Mini",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10 Mini" },
+        "machine_width": { "default_value": 300 },
+        "machine_depth": { "default_value": 220 },
+        "machine_height": { "default_value": 300 },
+        "machine_head_polygon": { "default_value": [
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
+                [30, 34]
+            ]
+        },
+        
+        "gantry_height": { "default_value": 30 }
+
+    },
+    "metadata": {
+
+    }
+}

resources/definitions/creawsome_cr10s.def.json

@@ -0,0 +1,12 @@
+{
+    "id": "creawsome_cr10s",
+    "name": "Creality CR-10S",
+    "version": 2,
+    "inherits": "creawsome_cr10",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10S" }
+    },
+    "metadata": {
+
+    }
+}

resources/definitions/creawsome_cr10s4.def.json

@@ -0,0 +1,25 @@
+{
+    "id": "creawsome_cr10s4",
+    "name": "Creality CR-10S4",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10S4" },
+        "machine_width": { "default_value": 400 },
+        "machine_depth": { "default_value": 400 },
+        "machine_height": { "default_value": 400 },
+        "machine_head_polygon": { "default_value": [
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
+                [30, 34]
+            ]
+        },
+        
+        "gantry_height": { "default_value": 30 }
+
+    },
+    "metadata": {
+
+    }
+}

resources/definitions/creawsome_cr10s5.def.json

@@ -0,0 +1,25 @@
+{
+    "id": "creawsome_cr10s5",
+    "name": "Creality CR-10S5",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10S5" },
+        "machine_width": { "default_value": 500 },
+        "machine_depth": { "default_value": 500 },
+        "machine_height": { "default_value": 500 },
+        "machine_head_polygon": { "default_value": [
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
+                [30, 34]
+            ]
+        },
+
+        "gantry_height": { "default_value": 30 }
+
+    },
+    "metadata": {
+
+    }
+}

resources/definitions/creawsome_cr10spro.def.json

@@ -0,0 +1,15 @@
+{
+    "id": "creawsome_cr10spro",
+    "name": "Creality CR-10S Pro",
+    "version": 2,
+    "inherits": "creawsome_cr10",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-10S Pro" },
+        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nM420 S1 Z2 ;Enable ABL using saved Mesh and Fade Height\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"}
+
+    },
+    "metadata": {
+        "platform": "creawsome_cr10spro.stl",
+        "platform_offset": [ -150, 0, 150]
+    }
+}

resources/definitions/creawsome_cr20.def.json

@@ -0,0 +1,25 @@
+{
+    "id": "creawsome_cr20",
+    "name": "Creality CR-20",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-20" },
+        "machine_width": { "default_value": 220 },
+        "machine_depth": { "default_value": 220 },
+        "machine_height": { "default_value": 250 },
+        "machine_head_polygon": { "default_value": [
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
+                [30, 34]
+            ]
+        },
+
+        "gantry_height": { "default_value": 30 }
+
+    },
+    "metadata": {
+
+    }
+}

resources/definitions/creawsome_cr20pro.def.json

@@ -0,0 +1,14 @@
+{
+    "id": "creawsome_cr20pro",
+    "name": "Creality CR-20 Pro",
+    "version": 2,
+    "inherits": "creawsome_cr20",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome CR-20 Pro" },
+        "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nM420 S1 Z2 ;Enable ABL using saved Mesh and Fade Height\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n"}
+
+    },
+    "metadata": {
+
+    }
+}

resources/definitions/creawsome_ender2.def.json

@@ -0,0 +1,25 @@
+{
+    "id": "creawsome_ender2",
+    "name": "Creality Ender-2",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome Ender-2" },
+        "machine_width": { "default_value": 150 },
+        "machine_depth": { "default_value": 150 },
+        "machine_height": { "default_value": 200 },
+        "machine_head_polygon": { "default_value": [
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
+                [30, 34]
+            ]
+        },
+
+        "gantry_height": { "default_value": 30 }
+
+    },
+    "metadata": {
+
+    }
+}

resources/definitions/creawsome_ender3.def.json

@@ -0,0 +1,26 @@
+{
+    "id": "creawsome_ender3",
+    "name": "Creality Ender-3",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome Ender-3" },
+        "machine_width": { "default_value": 220 },
+        "machine_depth": { "default_value": 220 },
+        "machine_height": { "default_value": 250 },
+        "machine_head_polygon": { "default_value": [
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
+                [30, 34]
+            ]
+        },
+
+        "gantry_height": { "default_value": 30 }
+
+    },
+    "metadata": {
+        "platform": "creawsome_ender3_printerhd.stl",
+        "platform_offset": [ -160, 0, 140]
+    }
+}

resources/definitions/creawsome_ender4.def.json

@@ -0,0 +1,26 @@
+{
+    "id": "creawsome_ender4",
+    "name": "Creality Ender-4",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome Ender-4" },
+        "machine_width": { "default_value": 452 },
+        "machine_depth": { "default_value": 468 },
+        "machine_height": { "default_value": 482 },
+        "machine_head_polygon": { "default_value": [
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
+                [30, 34]
+            ]
+        },
+
+        "gantry_height": { "default_value": 30 },
+        "speed_print": { "value": 80.0 }
+
+    },
+    "metadata": {
+
+    }
+}

resources/definitions/creawsome_ender5.def.json

@@ -0,0 +1,26 @@
+{
+    "id": "creawsome_ender5",
+    "name": "Creality Ender-5",
+    "version": 2,
+    "inherits": "creawsome_base",
+    "overrides": {
+        "machine_name": { "default_value": "Creawsome Ender-5" },
+        "machine_width": { "default_value": 220 },
+        "machine_depth": { "default_value": 220 },
+        "machine_height": { "default_value": 300 },
+        "machine_head_polygon": { "default_value": [
+                [-30, 34],
+                [-30, -32],
+                [30, -32],
+                [30, 34]
+            ]
+        },
+
+        "gantry_height": { "default_value": 30 },
+        "speed_print": { "value": 80.0 }
+
+    },
+    "metadata": {
+
+    }
+}

resources/extruders/creawsome_base_extruder_0.def.json

@@ -0,0 +1,17 @@
+{
+    "id": "creawsome_base_extruder_0",
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "creawsome_base",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+        
+    }
+}

resources/quality/creawsome/base/base_0.2_ABS_super.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.2mm Nozzle
+
+[values]
+wall_thickness = =line_width*8

resources/quality/creawsome/base/base_0.2_ABS_ultra.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = ultra
+material = generic_abs
+variant = 0.2mm Nozzle
+
+[values]
+wall_thickness = =line_width*8

resources/quality/creawsome/base/base_0.2_PETG_super.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_petg
+variant = 0.2mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*8
+;retraction_extra_prime_amount = 0.5
+

resources/quality/creawsome/base/base_0.2_PETG_ultra.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = ultra
+material = generic_petg
+variant = 0.2mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*8
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.2_PLA_super.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_pla
+variant = 0.2mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.2_PLA_ultra.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = ultra
+material = generic_pla
+variant = 0.2mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.3_ABS_adaptive.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.3_ABS_low.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.3_ABS_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.3_ABS_super.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.3_PETG_adaptive.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.3_PETG_low.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.3_PETG_standard.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.3_PETG_super.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.3_PLA_adaptive.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.3_PLA_low.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.3_PLA_standard.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.3_PLA_super.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_pla
+variant = 0.3mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.3_TPU_adaptive.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_tpu
+variant = 0.3mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.3_TPU_standard.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_tpu
+variant = 0.3mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.3_TPU_super.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_tpu
+variant = 0.3mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.4_ABS_adaptive.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_abs
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.4_ABS_low.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_abs
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.4_ABS_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_abs
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.4_ABS_super.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.4mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.4_PETG_adaptive.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.4_PETG_low.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.4_PETG_standard.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.4_PETG_super.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_petg
+variant = 0.4mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.4_PLA_adaptive.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_pla
+variant = 0.4mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.4_PLA_low.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_pla
+variant = 0.4mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.4_PLA_standard.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_pla
+variant = 0.4mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.4_PLA_super.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_pla
+variant = 0.4mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.4_TPU_adaptive.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_tpu
+variant = 0.4mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.4_TPU_standard.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_tpu
+variant = 0.4mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.4_TPU_super.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_tpu
+variant = 0.4mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.5_ABS_adaptive.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.5_ABS_low.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.5_ABS_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.5_ABS_super.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.5mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/base/base_0.5_PETG_adaptive.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.5_PETG_low.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.5_PETG_standard.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.5_PETG_super.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_petg
+variant = 0.5mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.5_PLA_adaptive.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.5_PLA_low.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.5_PLA_standard.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.5_PLA_super.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_pla
+variant = 0.5mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.5_TPU_adaptive.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_tpu
+variant = 0.5mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.5_TPU_standard.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_tpu
+variant = 0.5mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.5_TPU_super.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_tpu
+variant = 0.5mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.6_ABS_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_abs
+variant = 0.6mm Nozzle
+
+[values]
+wall_thickness = =line_width*3

resources/quality/creawsome/base/base_0.6_PETG_standard.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_petg
+variant = 0.6mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*3
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.6_PLA_draft.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+material = generic_pla
+variant = 0.6mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.6_PLA_low.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_pla
+variant = 0.6mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.6_PLA_standard.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_pla
+variant = 0.6mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.6_TPU_standard.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_tpu
+variant = 0.6mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.8_ABS_draft.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+material = generic_abs
+variant = 0.8mm Nozzle
+
+[values]
+wall_thickness = =line_width*3

resources/quality/creawsome/base/base_0.8_PETG_draft.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+material = generic_petg
+variant = 0.8mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*3
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_0.8_PLA_draft.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+material = generic_pla
+variant = 0.8mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_0.8_TPU_draft.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+material = generic_tpu
+variant = 0.8mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_1.0_ABS_draft.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+material = generic_abs
+variant = 1.0mm Nozzle
+
+[values]
+wall_thickness = =line_width*3

resources/quality/creawsome/base/base_1.0_PETG_draft.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+material = generic_petg
+variant = 1.0mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*3
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/base/base_1.0_PLA_draft.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+material = generic_pla
+variant = 1.0mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_1.0_TPU_draft.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+material = generic_tpu
+variant = 1.0mm Nozzle
+
+[values]

resources/quality/creawsome/base/base_global_adaptive.inst.cfg

@@ -0,0 +1,19 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+weight = -2
+global_quality = True
+
+[values]
+layer_height = 0.16
+layer_height_0 = 0.20
+top_bottom_thickness = =layer_height_0+layer_height*4
+wall_thickness = =line_width*3
+support_interface_height = =layer_height*6
+adaptive_layer_height_enabled = true

resources/quality/creawsome/base/base_global_draft.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Draft Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -5
+global_quality = True
+
+[values]
+layer_height = 0.32
+layer_height_0 = 0.32
+top_bottom_thickness = =layer_height_0+layer_height*3
+wall_thickness = =line_width*2
+support_interface_height = =layer_height*4

resources/quality/creawsome/base/base_global_low.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+weight = -4
+global_quality = True
+
+[values]
+layer_height = 0.28
+layer_height_0 = 0.28
+top_bottom_thickness = =layer_height_0+layer_height*3
+wall_thickness = =line_width*2
+support_interface_height = =layer_height*4

resources/quality/creawsome/base/base_global_standard.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+weight = -3
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.2
+top_bottom_thickness = =layer_height_0+layer_height*3
+wall_thickness = =line_width*3
+support_interface_height = =layer_height*5

resources/quality/creawsome/base/base_global_super.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+weight = -1
+global_quality = True
+
+[values]
+layer_height = 0.12
+layer_height_0 = 0.12
+top_bottom_thickness = =layer_height_0+layer_height*6
+wall_thickness = =line_width*3
+support_interface_height = =layer_height*8

resources/quality/creawsome/base/base_global_ultra.inst.cfg

@@ -0,0 +1,18 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creawsome_base
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = ultra
+weight = 0
+global_quality = True
+
+[values]
+layer_height = 0.08
+layer_height_0 = 0.12
+top_bottom_thickness = =layer_height_0+layer_height*10
+wall_thickness = =line_width*3
+support_interface_height = =layer_height*12

resources/quality/creawsome/cr10/cr10_0.2_ABS_super.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.2mm Nozzle
+
+[values]
+wall_thickness = =line_width*8

resources/quality/creawsome/cr10/cr10_0.2_ABS_ultra.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = ultra
+material = generic_abs
+variant = 0.2mm Nozzle
+
+[values]
+wall_thickness = =line_width*8

resources/quality/creawsome/cr10/cr10_0.2_PETG_super.inst.cfg

@@ -0,0 +1,17 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_petg
+variant = 0.2mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*8
+;retraction_extra_prime_amount = 0.5
+

resources/quality/creawsome/cr10/cr10_0.2_PETG_ultra.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = ultra
+material = generic_petg
+variant = 0.2mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*8
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/cr10/cr10_0.2_PLA_super.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_pla
+variant = 0.2mm Nozzle
+
+[values]

resources/quality/creawsome/cr10/cr10_0.2_PLA_ultra.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+version = 4
+name = Ultra Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = ultra
+material = generic_pla
+variant = 0.2mm Nozzle
+
+[values]

resources/quality/creawsome/cr10/cr10_0.3_ABS_adaptive.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/cr10/cr10_0.3_ABS_low.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/cr10/cr10_0.3_ABS_standard.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Standard Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = standard
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/cr10/cr10_0.3_ABS_super.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = Super Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = super
+material = generic_abs
+variant = 0.3mm Nozzle
+
+[values]
+wall_thickness = =line_width*4

resources/quality/creawsome/cr10/cr10_0.3_PETG_adaptive.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Dynamic Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = adaptive
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5

resources/quality/creawsome/cr10/cr10_0.3_PETG_low.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Low Quality
+definition = creawsome_cr10
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = low
+material = generic_petg
+variant = 0.3mm Nozzle
+
+[values]
+speed_layer_0 = 15
+wall_thickness = =line_width*4
+;retraction_extra_prime_amount = 0.5