From 17b455d2ed920e04161b0ee6d909ce2f61aa9832 Mon Sep 17 00:00:00 2001 From: Tim Kuipers Date: Wed, 27 Jul 2016 10:34:41 +0200 Subject: [PATCH] JSON rename: Support Roof ==> Support Interface (CURA-1013) the support roof settings are now used for support bottoms as well --- resources/definitions/fdmprinter.def.json | 36 +++++++++++------------ 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 303f06288e..8a53f4859a 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -636,8 +636,8 @@ }, "support_roof_line_width": { - "label": "Support Roof Line Width", - "description": "Width of a single support roof line.", + "label": "Support Interface Line Width", + "description": "Width of a single support interface line.", "unit": "mm", "default_value": 0.4, "minimum_value": "0.0001", @@ -1468,8 +1468,8 @@ }, "speed_support_roof": { - "label": "Support Roof Speed", - "description": "The speed at which the roofs of support are printed. Printing the support roof at lower speeds can improve overhang quality.", + "label": "Support Interface Speed", + "description": "The speed at which the roofs and bottoms of support are printed. Printing the them at lower speeds can improve overhang quality.", "unit": "mm/s", "type": "float", "default_value": 40, @@ -1671,8 +1671,8 @@ "settable_per_extruder": false }, "acceleration_support_roof": { - "label": "Support Roof Acceleration", - "description": "The acceleration with which the roofs of support are printed. Printing the support roof at lower accelerations can improve overhang quality.", + "label": "Support Interface Acceleration", + "description": "The acceleration with which the roofs and bottoms of support are printed. Printing them at lower accelerations can improve overhang quality.", "unit": "mm/s²", "type": "float", "default_value": 3000, @@ -1862,8 +1862,8 @@ "settable_per_extruder": false }, "jerk_support_roof": { - "label": "Support Roof Jerk", - "description": "The maximum instantaneous velocity change with which the roofs of support are printed.", + "label": "Support Interface Jerk", + "description": "The maximum instantaneous velocity change with which the roofs and bottoms of support are printed.", "unit": "mm/s", "type": "float", "default_value": 20, @@ -2357,8 +2357,8 @@ }, "support_roof_enable": { - "label": "Enable Support Roof", - "description": "Generate a dense top skin at the top of the support on which the model is printed.", + "label": "Enable Support Interface", + "description": "Generate a dense interface between the model and the support. This will create a skin at the top of the support on which the model is printed and at the bottom of the support, where it rests on the model.", "type": "bool", "default_value": false, "global_inherits_stack": "support_extruder_nr", @@ -2411,8 +2411,8 @@ }, "support_roof_density": { - "label": "Support Roof Density", - "description": "Adjusts the density of the roof of the support structure. A higher value results in better overhangs, but the supports are harder to remove.", + "label": "Support Interface Density", + "description": "Adjusts the density of the roofs and bottoms of the support structure. A higher value results in better overhangs, but the supports are harder to remove.", "unit": "%", "type": "float", "default_value": 100, @@ -2425,8 +2425,8 @@ { "support_roof_line_distance": { - "label": "Support Roof Line Distance", - "description": "Distance between the printed support roof lines. This setting is calculated by the support roof Density, but can be adjusted separately.", + "label": "Support Interface Line Distance", + "description": "Distance between the printed support interface lines. This setting is calculated by the Support Interface Density, but can be adjusted separately.", "unit": "mm", "type": "float", "default_value": 0.4, @@ -2440,8 +2440,8 @@ }, "support_roof_pattern": { - "label": "Support Roof Pattern", - "description": "The pattern with which the top of the support is printed.", + "label": "Support Interface Pattern", + "description": "The pattern with which the interface of the support with the model is printed.", "type": "enum", "options": { @@ -3089,8 +3089,8 @@ }, "support_roof_extruder_nr": { - "label": "Support Roof Extruder", - "description": "The extruder train to use for printing the roof of the support. This is used in multi-extrusion.", + "label": "Support Interface Extruder", + "description": "The extruder train to use for printing the roofs and bottoms of the support. This is used in multi-extrusion.", "type": "extruder", "default_value": "0", "value": "support_extruder_nr",