mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-06 13:34:01 -06:00
refactor: move spaghetti infill options to experimental category
This commit is contained in:
Tim Kuipers
parent
3be6526be3
commit
14e85d7b6b
1 changed files with 58 additions and 58 deletions
|
|
@ -1159,64 +1159,6 @@
|
|||
"enabled": "infill_pattern != 'concentric' and infill_pattern != 'concentric_3d' and infill_pattern != 'cubicsubdiv'",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"spaghetti_infill_enabled":
|
||||
{
|
||||
"label": "Spaghetti Infill",
|
||||
"description": "Print the infill every so often, so that the filament will curl up chaotically inside the object. This reduces print time, but the behaviour is rather unpredictable.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"enabled": "infill_sparse_density > 0",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"spaghetti_max_infill_angle":
|
||||
{
|
||||
"label": "Spaghetti Maximum Infill Angle",
|
||||
"description": "The maximum angle w.r.t. the Z axis of the inside of the print for areas which are to be filled with spaghetti infill afterwards. Lowering this value causes more angled parts in your model to be filled on each layer.",
|
||||
"unit": "°",
|
||||
"type": "float",
|
||||
"default_value": 10,
|
||||
"minimum_value": "0",
|
||||
"maximum_value": "90",
|
||||
"maximum_value_warning": "45",
|
||||
"enabled": "infill_sparse_density > 0 and spaghetti_infill_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"spaghetti_max_height":
|
||||
{
|
||||
"label": "Spaghetti Infill Maximum Height",
|
||||
"description": "The maximum height of inside space which can be combined and filled from the top.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 2.0,
|
||||
"minimum_value": "layer_height",
|
||||
"maximum_value_warning": "10.0",
|
||||
"enabled": "infill_sparse_density > 0 and spaghetti_infill_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"spaghetti_inset":
|
||||
{
|
||||
"label": "Spaghetti Inset",
|
||||
"description": "The offset from the walls from where the spaghetti infill will be printed.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 0.2,
|
||||
"minimum_value_warning": "0",
|
||||
"maximum_value_warning": "5.0",
|
||||
"enabled": "infill_sparse_density > 0 and spaghetti_infill_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"spaghetti_flow":
|
||||
{
|
||||
"label": "Spaghetti Flow",
|
||||
"description": "Adjusts the density of the spaghetti infill. Note that the Infill Density only controls the line spacing of the filling pattern, not the amount of extrusion for spaghetti infill.",
|
||||
"unit": "%",
|
||||
"type": "float",
|
||||
"default_value": 20,
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "100",
|
||||
"enabled": "infill_sparse_density > 0 and spaghetti_infill_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"sub_div_rad_add":
|
||||
{
|
||||
"label": "Cubic Subdivision Shell",
|
||||
|
|
@ -4747,6 +4689,64 @@
|
|||
"enabled": "top_bottom_pattern != 'concentric'",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"spaghetti_infill_enabled":
|
||||
{
|
||||
"label": "Spaghetti Infill",
|
||||
"description": "Print the infill every so often, so that the filament will curl up chaotically inside the object. This reduces print time, but the behaviour is rather unpredictable.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"enabled": "infill_sparse_density > 0",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"spaghetti_max_infill_angle":
|
||||
{
|
||||
"label": "Spaghetti Maximum Infill Angle",
|
||||
"description": "The maximum angle w.r.t. the Z axis of the inside of the print for areas which are to be filled with spaghetti infill afterwards. Lowering this value causes more angled parts in your model to be filled on each layer.",
|
||||
"unit": "°",
|
||||
"type": "float",
|
||||
"default_value": 10,
|
||||
"minimum_value": "0",
|
||||
"maximum_value": "90",
|
||||
"maximum_value_warning": "45",
|
||||
"enabled": "infill_sparse_density > 0 and spaghetti_infill_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"spaghetti_max_height":
|
||||
{
|
||||
"label": "Spaghetti Infill Maximum Height",
|
||||
"description": "The maximum height of inside space which can be combined and filled from the top.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 2.0,
|
||||
"minimum_value": "layer_height",
|
||||
"maximum_value_warning": "10.0",
|
||||
"enabled": "infill_sparse_density > 0 and spaghetti_infill_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"spaghetti_inset":
|
||||
{
|
||||
"label": "Spaghetti Inset",
|
||||
"description": "The offset from the walls from where the spaghetti infill will be printed.",
|
||||
"unit": "mm",
|
||||
"type": "float",
|
||||
"default_value": 0.2,
|
||||
"minimum_value_warning": "0",
|
||||
"maximum_value_warning": "5.0",
|
||||
"enabled": "infill_sparse_density > 0 and spaghetti_infill_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"spaghetti_flow":
|
||||
{
|
||||
"label": "Spaghetti Flow",
|
||||
"description": "Adjusts the density of the spaghetti infill. Note that the Infill Density only controls the line spacing of the filling pattern, not the amount of extrusion for spaghetti infill.",
|
||||
"unit": "%",
|
||||
"type": "float",
|
||||
"default_value": 20,
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "100",
|
||||
"enabled": "infill_sparse_density > 0 and spaghetti_infill_enabled",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"support_conical_enabled":
|
||||
{
|
||||
"label": "Enable Conical Support",
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue