diff --git a/.github/ISSUE_TEMPLATE.md b/.github/ISSUE_TEMPLATE.md index b78b9b91a2..97c849144d 100644 --- a/.github/ISSUE_TEMPLATE.md +++ b/.github/ISSUE_TEMPLATE.md @@ -1,9 +1,12 @@ diff --git a/cura/BuildVolume.py b/cura/BuildVolume.py index 60e7a32857..b929f0f8f1 100755 --- a/cura/BuildVolume.py +++ b/cura/BuildVolume.py @@ -826,6 +826,7 @@ class BuildVolume(SceneNode): offset_y = extruder.getProperty("machine_nozzle_offset_y", "value") if offset_y is None: offset_y = 0 + offset_y = -offset_y #Y direction of g-code is the inverse of Y direction of Cura's scene space. result[extruder_id] = [] for polygon in machine_disallowed_polygons: @@ -936,8 +937,8 @@ class BuildVolume(SceneNode): # stack. # # \return A sequence of setting values, one for each extruder. - def _getSettingFromAllExtruders(self, setting_key, property = "value"): - all_values = ExtruderManager.getInstance().getAllExtruderSettings(setting_key, property) + def _getSettingFromAllExtruders(self, setting_key): + all_values = ExtruderManager.getInstance().getAllExtruderSettings(setting_key, "value") all_types = ExtruderManager.getInstance().getAllExtruderSettings(setting_key, "type") for i in range(len(all_values)): if not all_values[i] and (all_types[i] == "int" or all_types[i] == "float"): @@ -950,7 +951,7 @@ class BuildVolume(SceneNode): # not part of the collision radius, such as bed adhesion (skirt/brim/raft) # and travel avoid distance. def _getEdgeDisallowedSize(self): - if not self._global_container_stack: + if not self._global_container_stack or not self._global_container_stack.extruders: return 0 container_stack = self._global_container_stack diff --git a/cura/CuraApplication.py b/cura/CuraApplication.py index 90c7dbb75e..2ca321e4cc 100755 --- a/cura/CuraApplication.py +++ b/cura/CuraApplication.py @@ -2,6 +2,8 @@ # Cura is released under the terms of the LGPLv3 or higher. #Type hinting. from typing import Dict + +from PyQt5.QtCore import QObject from PyQt5.QtNetwork import QLocalServer from PyQt5.QtNetwork import QLocalSocket @@ -52,13 +54,23 @@ from UM.Settings.SettingDefinition import SettingDefinition, DefinitionPropertyT from UM.Settings.ContainerRegistry import ContainerRegistry from UM.Settings.SettingFunction import SettingFunction from cura.Settings.MachineNameValidator import MachineNameValidator -from cura.Settings.ProfilesModel import ProfilesModel -from cura.Settings.MaterialsModel import MaterialsModel -from cura.Settings.QualityAndUserProfilesModel import QualityAndUserProfilesModel + +from cura.Machines.Models.BuildPlateModel import BuildPlateModel +from cura.Machines.Models.NozzleModel import NozzleModel +from cura.Machines.Models.QualityProfilesDropDownMenuModel import QualityProfilesDropDownMenuModel +from cura.Machines.Models.CustomQualityProfilesDropDownMenuModel import CustomQualityProfilesDropDownMenuModel + +from cura.Machines.Models.MultiBuildPlateModel import MultiBuildPlateModel + +from cura.Machines.Models.MaterialManagementModel import MaterialManagementModel +from cura.Machines.Models.GenericMaterialsModel import GenericMaterialsModel +from cura.Machines.Models.BrandMaterialsModel import BrandMaterialsModel + from cura.Settings.SettingInheritanceManager import SettingInheritanceManager -from cura.Settings.UserProfilesModel import UserProfilesModel from cura.Settings.SimpleModeSettingsManager import SimpleModeSettingsManager +from cura.Machines.VariantManager import VariantManager +from cura.Machines.Models.QualityManagementModel import QualityManagementModel from . import PlatformPhysics from . import BuildVolume @@ -71,17 +83,14 @@ from . import CameraImageProvider from . import MachineActionManager from cura.Settings.MachineManager import MachineManager -from cura.Settings.MaterialManager import MaterialManager from cura.Settings.ExtruderManager import ExtruderManager from cura.Settings.UserChangesModel import UserChangesModel from cura.Settings.ExtrudersModel import ExtrudersModel -from cura.Settings.ContainerSettingsModel import ContainerSettingsModel from cura.Settings.MaterialSettingsVisibilityHandler import MaterialSettingsVisibilityHandler -from cura.Settings.QualitySettingsModel import QualitySettingsModel +from cura.Machines.Models.QualitySettingsModel import QualitySettingsModel from cura.Settings.ContainerManager import ContainerManager from cura.ObjectsModel import ObjectsModel -from cura.BuildPlateModel import BuildPlateModel from PyQt5.QtCore import QUrl, pyqtSignal, pyqtProperty, QEvent, Q_ENUMS from UM.FlameProfiler import pyqtSlot @@ -216,6 +225,7 @@ class CuraApplication(QtApplication): self._material_manager = None self._object_manager = None self._build_plate_model = None + self._multi_build_plate_model = None self._setting_inheritance_manager = None self._simple_mode_settings_manager = None self._cura_scene_controller = None @@ -233,6 +243,8 @@ class CuraApplication(QtApplication): if kwargs["parsed_command_line"].get("trigger_early_crash", False): assert not "This crash is triggered by the trigger_early_crash command line argument." + self._variant_manager = None + self.default_theme = "cura-light" self.setWindowIcon(QIcon(Resources.getPath(Resources.Images, "cura-icon.png"))) @@ -287,21 +299,25 @@ class CuraApplication(QtApplication): # Since they are empty, they should never be serialized and instead just programmatically created. # We need them to simplify the switching between materials. empty_container = ContainerRegistry.getInstance().getEmptyInstanceContainer() + self.empty_container = empty_container empty_definition_changes_container = copy.deepcopy(empty_container) empty_definition_changes_container.setMetaDataEntry("id", "empty_definition_changes") empty_definition_changes_container.addMetaDataEntry("type", "definition_changes") ContainerRegistry.getInstance().addContainer(empty_definition_changes_container) + self.empty_definition_changes_container = empty_definition_changes_container empty_variant_container = copy.deepcopy(empty_container) empty_variant_container.setMetaDataEntry("id", "empty_variant") empty_variant_container.addMetaDataEntry("type", "variant") ContainerRegistry.getInstance().addContainer(empty_variant_container) + self.empty_variant_container = empty_variant_container empty_material_container = copy.deepcopy(empty_container) empty_material_container.setMetaDataEntry("id", "empty_material") empty_material_container.addMetaDataEntry("type", "material") ContainerRegistry.getInstance().addContainer(empty_material_container) + self.empty_material_container = empty_material_container empty_quality_container = copy.deepcopy(empty_container) empty_quality_container.setMetaDataEntry("id", "empty_quality") @@ -310,12 +326,14 @@ class CuraApplication(QtApplication): empty_quality_container.addMetaDataEntry("type", "quality") empty_quality_container.addMetaDataEntry("supported", False) ContainerRegistry.getInstance().addContainer(empty_quality_container) + self.empty_quality_container = empty_quality_container empty_quality_changes_container = copy.deepcopy(empty_container) empty_quality_changes_container.setMetaDataEntry("id", "empty_quality_changes") empty_quality_changes_container.addMetaDataEntry("type", "quality_changes") empty_quality_changes_container.addMetaDataEntry("quality_type", "not_supported") ContainerRegistry.getInstance().addContainer(empty_quality_changes_container) + self.empty_quality_changes_container = empty_quality_changes_container with ContainerRegistry.getInstance().lockFile(): ContainerRegistry.getInstance().loadAllMetadata() @@ -381,6 +399,9 @@ class CuraApplication(QtApplication): self.getCuraSceneController().setActiveBuildPlate(0) # Initialize + self._quality_profile_drop_down_menu_model = None + self._custom_quality_profile_drop_down_menu_model = None + CuraApplication.Created = True @pyqtSlot(str, result = str) @@ -523,8 +544,6 @@ class CuraApplication(QtApplication): has_user_interaction = True return has_user_interaction - onDiscardOrKeepProfileChangesClosed = pyqtSignal() # Used to notify other managers that the dialog was closed - @pyqtSlot(str) def discardOrKeepProfileChangesClosed(self, option): if option == "discard": @@ -547,7 +566,6 @@ class CuraApplication(QtApplication): user_global_container.update() # notify listeners that quality has changed (after user selected discard or keep) - self.onDiscardOrKeepProfileChangesClosed.emit() self.getMachineManager().activeQualityChanged.emit() @pyqtSlot(int) @@ -723,6 +741,20 @@ class CuraApplication(QtApplication): def run(self): self.preRun() + container_registry = ContainerRegistry.getInstance() + self._variant_manager = VariantManager(container_registry) + self._variant_manager.initialize() + + from cura.Machines.MaterialManager import MaterialManager + self._material_manager = MaterialManager(container_registry, parent = self) + self._material_manager.initialize() + + from cura.Machines.QualityManager import QualityManager + self._quality_manager = QualityManager(container_registry, parent = self) + self._quality_manager.initialize() + + self._machine_manager = MachineManager(self) + # Check if we should run as single instance or not self._setUpSingleInstanceServer() @@ -816,7 +848,7 @@ class CuraApplication(QtApplication): def getMachineManager(self, *args) -> MachineManager: if self._machine_manager is None: - self._machine_manager = MachineManager.createMachineManager() + self._machine_manager = MachineManager(self) return self._machine_manager def getExtruderManager(self, *args): @@ -824,20 +856,32 @@ class CuraApplication(QtApplication): self._extruder_manager = ExtruderManager.createExtruderManager() return self._extruder_manager + def getVariantManager(self, *args): + return self._variant_manager + + @pyqtSlot(result = QObject) def getMaterialManager(self, *args): - if self._material_manager is None: - self._material_manager = MaterialManager.createMaterialManager() return self._material_manager + @pyqtSlot(result = QObject) + def getQualityManager(self, *args): + return self._quality_manager + def getObjectsModel(self, *args): if self._object_manager is None: self._object_manager = ObjectsModel.createObjectsModel() return self._object_manager + @pyqtSlot(result = QObject) + def getMultiBuildPlateModel(self, *args): + if self._multi_build_plate_model is None: + self._multi_build_plate_model = MultiBuildPlateModel(self) + return self._multi_build_plate_model + + @pyqtSlot(result = QObject) def getBuildPlateModel(self, *args): if self._build_plate_model is None: - self._build_plate_model = BuildPlateModel.createBuildPlateModel() - + self._build_plate_model = BuildPlateModel(self) return self._build_plate_model def getCuraSceneController(self, *args): @@ -875,6 +919,16 @@ class CuraApplication(QtApplication): def getPrintInformation(self): return self._print_information + def getQualityProfilesDropDownMenuModel(self, *args, **kwargs): + if self._quality_profile_drop_down_menu_model is None: + self._quality_profile_drop_down_menu_model = QualityProfilesDropDownMenuModel(self) + return self._quality_profile_drop_down_menu_model + + def getCustomQualityProfilesDropDownMenuModel(self, *args, **kwargs): + if self._custom_quality_profile_drop_down_menu_model is None: + self._custom_quality_profile_drop_down_menu_model = CustomQualityProfilesDropDownMenuModel(self) + return self._custom_quality_profile_drop_down_menu_model + ## Registers objects for the QML engine to use. # # \param engine The QML engine. @@ -889,27 +943,34 @@ class CuraApplication(QtApplication): qmlRegisterUncreatableType(CuraApplication, "Cura", 1, 0, "ResourceTypes", "Just an Enum type") - qmlRegisterSingletonType(CuraSceneController, "Cura", 1, 2, "SceneController", self.getCuraSceneController) + qmlRegisterSingletonType(CuraSceneController, "Cura", 1, 0, "SceneController", self.getCuraSceneController) qmlRegisterSingletonType(ExtruderManager, "Cura", 1, 0, "ExtruderManager", self.getExtruderManager) qmlRegisterSingletonType(MachineManager, "Cura", 1, 0, "MachineManager", self.getMachineManager) - qmlRegisterSingletonType(MaterialManager, "Cura", 1, 0, "MaterialManager", self.getMaterialManager) qmlRegisterSingletonType(SettingInheritanceManager, "Cura", 1, 0, "SettingInheritanceManager", self.getSettingInheritanceManager) - qmlRegisterSingletonType(SimpleModeSettingsManager, "Cura", 1, 2, "SimpleModeSettingsManager", self.getSimpleModeSettingsManager) + qmlRegisterSingletonType(SimpleModeSettingsManager, "Cura", 1, 0, "SimpleModeSettingsManager", self.getSimpleModeSettingsManager) qmlRegisterSingletonType(MachineActionManager.MachineActionManager, "Cura", 1, 0, "MachineActionManager", self.getMachineActionManager) - qmlRegisterSingletonType(ObjectsModel, "Cura", 1, 2, "ObjectsModel", self.getObjectsModel) - qmlRegisterSingletonType(BuildPlateModel, "Cura", 1, 2, "BuildPlateModel", self.getBuildPlateModel) + qmlRegisterSingletonType(ObjectsModel, "Cura", 1, 0, "ObjectsModel", self.getObjectsModel) + qmlRegisterType(BuildPlateModel, "Cura", 1, 0, "BuildPlateModel") + qmlRegisterType(MultiBuildPlateModel, "Cura", 1, 0, "MultiBuildPlateModel") qmlRegisterType(InstanceContainer, "Cura", 1, 0, "InstanceContainer") qmlRegisterType(ExtrudersModel, "Cura", 1, 0, "ExtrudersModel") - qmlRegisterType(ContainerSettingsModel, "Cura", 1, 0, "ContainerSettingsModel") - qmlRegisterSingletonType(ProfilesModel, "Cura", 1, 0, "ProfilesModel", ProfilesModel.createProfilesModel) - qmlRegisterType(MaterialsModel, "Cura", 1, 0, "MaterialsModel") - qmlRegisterType(QualityAndUserProfilesModel, "Cura", 1, 0, "QualityAndUserProfilesModel") - qmlRegisterType(UserProfilesModel, "Cura", 1, 0, "UserProfilesModel") + + qmlRegisterType(GenericMaterialsModel, "Cura", 1, 0, "GenericMaterialsModel") + qmlRegisterType(BrandMaterialsModel, "Cura", 1, 0, "BrandMaterialsModel") + qmlRegisterType(MaterialManagementModel, "Cura", 1, 0, "MaterialManagementModel") + qmlRegisterType(QualityManagementModel, "Cura", 1, 0, "QualityManagementModel") + + qmlRegisterSingletonType(QualityProfilesDropDownMenuModel, "Cura", 1, 0, + "QualityProfilesDropDownMenuModel", self.getQualityProfilesDropDownMenuModel) + qmlRegisterSingletonType(CustomQualityProfilesDropDownMenuModel, "Cura", 1, 0, + "CustomQualityProfilesDropDownMenuModel", self.getCustomQualityProfilesDropDownMenuModel) + qmlRegisterType(NozzleModel, "Cura", 1, 0, "NozzleModel") + qmlRegisterType(MaterialSettingsVisibilityHandler, "Cura", 1, 0, "MaterialSettingsVisibilityHandler") qmlRegisterType(QualitySettingsModel, "Cura", 1, 0, "QualitySettingsModel") qmlRegisterType(MachineNameValidator, "Cura", 1, 0, "MachineNameValidator") - qmlRegisterType(UserChangesModel, "Cura", 1, 1, "UserChangesModel") + qmlRegisterType(UserChangesModel, "Cura", 1, 0, "UserChangesModel") qmlRegisterSingletonType(ContainerManager, "Cura", 1, 0, "ContainerManager", ContainerManager.createContainerManager) # As of Qt5.7, it is necessary to get rid of any ".." in the path for the singleton to work. @@ -991,7 +1052,7 @@ class CuraApplication(QtApplication): count = 0 scene_bounding_box = None is_block_slicing_node = False - active_build_plate = self.getBuildPlateModel().activeBuildPlate + active_build_plate = self.getMultiBuildPlateModel().activeBuildPlate for node in DepthFirstIterator(self.getController().getScene().getRoot()): if ( not issubclass(type(node), CuraSceneNode) or @@ -1240,7 +1301,7 @@ class CuraApplication(QtApplication): @pyqtSlot() def arrangeAll(self): nodes = [] - active_build_plate = self.getBuildPlateModel().activeBuildPlate + active_build_plate = self.getMultiBuildPlateModel().activeBuildPlate for node in DepthFirstIterator(self.getController().getScene().getRoot()): if not isinstance(node, SceneNode): continue @@ -1389,7 +1450,7 @@ class CuraApplication(QtApplication): group_decorator = GroupDecorator() group_node.addDecorator(group_decorator) group_node.addDecorator(ConvexHullDecorator()) - group_node.addDecorator(BuildPlateDecorator(self.getBuildPlateModel().activeBuildPlate)) + group_node.addDecorator(BuildPlateDecorator(self.getMultiBuildPlateModel().activeBuildPlate)) group_node.setParent(self.getController().getScene().getRoot()) group_node.setSelectable(True) center = Selection.getSelectionCenter() @@ -1534,7 +1595,7 @@ class CuraApplication(QtApplication): arrange_objects_on_load = ( not Preferences.getInstance().getValue("cura/use_multi_build_plate") or not Preferences.getInstance().getValue("cura/not_arrange_objects_on_load")) - target_build_plate = self.getBuildPlateModel().activeBuildPlate if arrange_objects_on_load else -1 + target_build_plate = self.getMultiBuildPlateModel().activeBuildPlate if arrange_objects_on_load else -1 root = self.getController().getScene().getRoot() fixed_nodes = [] diff --git a/cura/Machines/ContainerNode.py b/cura/Machines/ContainerNode.py new file mode 100644 index 0000000000..6a839fb921 --- /dev/null +++ b/cura/Machines/ContainerNode.py @@ -0,0 +1,49 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from typing import Optional + +from collections import OrderedDict + +from UM.Logger import Logger +from UM.Settings.InstanceContainer import InstanceContainer + + +## +# A metadata / container combination. Use getContainer() to get the container corresponding to the metadata. +# +# ContainerNode is a multi-purpose class. It has two main purposes: +# 1. It encapsulates an InstanceContainer. It contains that InstanceContainer's +# - metadata (Always) +# - container (lazy-loaded when needed) +# 2. It also serves as a node in a hierarchical InstanceContainer lookup table/tree. +# This is used in Variant, Material, and Quality Managers. +# +class ContainerNode: + __slots__ = ("metadata", "container", "children_map") + + def __init__(self, metadata: Optional[dict] = None): + self.metadata = metadata + self.container = None + self.children_map = OrderedDict() + + def getChildNode(self, child_key: str) -> Optional["ContainerNode"]: + return self.children_map.get(child_key) + + def getContainer(self) -> "InstanceContainer": + if self.metadata is None: + raise RuntimeError("Cannot get container for a ContainerNode without metadata") + + if self.container is None: + container_id = self.metadata["id"] + Logger.log("i", "Lazy-loading container [%s]", container_id) + from UM.Settings.ContainerRegistry import ContainerRegistry + container_list = ContainerRegistry.getInstance().findInstanceContainers(id = container_id) + if not container_list: + raise RuntimeError("Failed to lazy-load container [%s], cannot find it" % container_id) + self.container = container_list[0] + + return self.container + + def __str__(self) -> str: + return "%s[%s]" % (self.__class__.__name__, self.metadata.get("id")) diff --git a/cura/Machines/MaterialGroup.py b/cura/Machines/MaterialGroup.py new file mode 100644 index 0000000000..009778943a --- /dev/null +++ b/cura/Machines/MaterialGroup.py @@ -0,0 +1,26 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + + +# +# A MaterialGroup represents a group of material InstanceContainers that are derived from a single material profile. +# The main InstanceContainer which has the ID of the material profile file name is called the "root_material". For +# example: "generic_abs" is the root material (ID) of "generic_abs_ultimaker3" and "generic_abs_ultimaker3_AA_0.4", +# and "generic_abs_ultimaker3" and "generic_abs_ultimaker3_AA_0.4" are derived materials of "generic_abs". +# +# Using "generic_abs" as an example, the MaterialGroup for "generic_abs" will contain the following information: +# - name: "generic_abs", root_material_id +# - root_material_node: MaterialNode of "generic_abs" +# - derived_material_node_list: A list of MaterialNodes that are derived from "generic_abs", +# so "generic_abs_ultimaker3", "generic_abs_ultimaker3_AA_0.4", etc. +# +class MaterialGroup: + __slots__ = ("name", "root_material_node", "derived_material_node_list") + + def __init__(self, name: str): + self.name = name + self.root_material_node = None + self.derived_material_node_list = [] + + def __str__(self) -> str: + return "%s[%s]" % (self.__class__.__name__, self.name) diff --git a/cura/Machines/MaterialManager.py b/cura/Machines/MaterialManager.py new file mode 100644 index 0000000000..98e4f67f82 --- /dev/null +++ b/cura/Machines/MaterialManager.py @@ -0,0 +1,479 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from collections import defaultdict, OrderedDict +import copy +import uuid +from typing import Optional, TYPE_CHECKING + +from PyQt5.Qt import QTimer, QObject, pyqtSignal, pyqtSlot + +from UM.Application import Application +from UM.Logger import Logger +from UM.Settings.ContainerRegistry import ContainerRegistry +from UM.Settings.SettingFunction import SettingFunction +from UM.Util import parseBool + +from .MaterialNode import MaterialNode +from .MaterialGroup import MaterialGroup + +if TYPE_CHECKING: + from cura.Settings.GlobalStack import GlobalStack + + +# +# MaterialManager maintains a number of maps and trees for material lookup. +# The models GUI and QML use are now only dependent on the MaterialManager. That means as long as the data in +# MaterialManager gets updated correctly, the GUI models should be updated correctly too, and the same goes for GUI. +# +# For now, updating the lookup maps and trees here is very simple: we discard the old data completely and recreate them +# again. This means the update is exactly the same as initialization. There are performance concerns about this approach +# but so far the creation of the tables and maps is very fast and there is no noticeable slowness, we keep it like this +# because it's simple. +# +class MaterialManager(QObject): + + materialsUpdated = pyqtSignal() # Emitted whenever the material lookup tables are updated. + + def __init__(self, container_registry, parent = None): + super().__init__(parent) + self._application = Application.getInstance() + self._container_registry = container_registry # type: ContainerRegistry + + self._fallback_materials_map = dict() # material_type -> generic material metadata + self._material_group_map = dict() # root_material_id -> MaterialGroup + self._diameter_machine_variant_material_map = dict() # approximate diameter str -> dict(machine_definition_id -> MaterialNode) + + # We're using these two maps to convert between the specific diameter material id and the generic material id + # because the generic material ids are used in qualities and definitions, while the specific diameter material is meant + # i.e. generic_pla -> generic_pla_175 + self._material_diameter_map = defaultdict(dict) # root_material_id -> approximate diameter str -> root_material_id for that diameter + self._diameter_material_map = dict() # material id including diameter (generic_pla_175) -> material root id (generic_pla) + + # This is used in Legacy UM3 send material function and the material management page. + self._guid_material_groups_map = defaultdict(list) # GUID -> a list of material_groups + + # The machine definition ID for the non-machine-specific materials. + # This is used as the last fallback option if the given machine-specific material(s) cannot be found. + self._default_machine_definition_id = "fdmprinter" + self._default_approximate_diameter_for_quality_search = "3" + + # When a material gets added/imported, there can be more than one InstanceContainers. In those cases, we don't + # want to react on every container/metadata changed signal. The timer here is to buffer it a bit so we don't + # react too many time. + self._update_timer = QTimer(self) + self._update_timer.setInterval(300) + self._update_timer.setSingleShot(True) + self._update_timer.timeout.connect(self._updateMaps) + + self._container_registry.containerMetaDataChanged.connect(self._onContainerMetadataChanged) + self._container_registry.containerAdded.connect(self._onContainerMetadataChanged) + self._container_registry.containerRemoved.connect(self._onContainerMetadataChanged) + + def initialize(self): + # Find all materials and put them in a matrix for quick search. + material_metadata_list = self._container_registry.findContainersMetadata(type = "material") + + self._material_group_map = dict() + + # Map #1 + # root_material_id -> MaterialGroup + for material_metadata in material_metadata_list: + material_id = material_metadata["id"] + # We don't store empty material in the lookup tables + if material_id == "empty_material": + continue + + root_material_id = material_metadata.get("base_file") + if root_material_id not in self._material_group_map: + self._material_group_map[root_material_id] = MaterialGroup(root_material_id) + group = self._material_group_map[root_material_id] + + # We only add root materials here + if material_id == root_material_id: + group.root_material_node = MaterialNode(material_metadata) + else: + new_node = MaterialNode(material_metadata) + group.derived_material_node_list.append(new_node) + # Order this map alphabetically so it's easier to navigate in a debugger + self._material_group_map = OrderedDict(sorted(self._material_group_map.items(), key = lambda x: x[0])) + + # Map #1.5 + # GUID -> material group list + self._guid_material_groups_map = defaultdict(list) + for root_material_id, material_group in self._material_group_map.items(): + guid = material_group.root_material_node.metadata["GUID"] + self._guid_material_groups_map[guid].append(material_group) + + # Map #2 + # Lookup table for material type -> fallback material metadata, only for read-only materials + grouped_by_type_dict = dict() + for root_material_id, material_node in self._material_group_map.items(): + if not self._container_registry.isReadOnly(root_material_id): + continue + material_type = material_node.root_material_node.metadata["material"] + if material_type not in grouped_by_type_dict: + grouped_by_type_dict[material_type] = {"generic": None, + "others": []} + brand = material_node.root_material_node.metadata["brand"] + if brand.lower() == "generic": + to_add = True + if material_type in grouped_by_type_dict: + diameter = material_node.root_material_node.metadata.get("approximate_diameter") + if diameter != self._default_approximate_diameter_for_quality_search: + to_add = False # don't add if it's not the default diameter + if to_add: + grouped_by_type_dict[material_type] = material_node.root_material_node.metadata + self._fallback_materials_map = grouped_by_type_dict + + # Map #3 + # There can be multiple material profiles for the same material with different diameters, such as "generic_pla" + # and "generic_pla_175". This is inconvenient when we do material-specific quality lookup because a quality can + # be for either "generic_pla" or "generic_pla_175", but not both. This map helps to get the correct material ID + # for quality search. + self._material_diameter_map = defaultdict(dict) + self._diameter_material_map = dict() + + # Group the material IDs by the same name, material, brand, and color but with different diameters. + material_group_dict = dict() + keys_to_fetch = ("name", "material", "brand", "color") + for root_material_id, machine_node in self._material_group_map.items(): + if not self._container_registry.isReadOnly(root_material_id): + continue + + root_material_metadata = machine_node.root_material_node.metadata + + key_data = [] + for key in keys_to_fetch: + key_data.append(root_material_metadata.get(key)) + key_data = tuple(key_data) + + if key_data not in material_group_dict: + material_group_dict[key_data] = dict() + approximate_diameter = root_material_metadata.get("approximate_diameter") + material_group_dict[key_data][approximate_diameter] = root_material_metadata["id"] + + # Map [root_material_id][diameter] -> root_material_id for this diameter + for data_dict in material_group_dict.values(): + for root_material_id1 in data_dict.values(): + if root_material_id1 in self._material_diameter_map: + continue + diameter_map = data_dict + for root_material_id2 in data_dict.values(): + self._material_diameter_map[root_material_id2] = diameter_map + + default_root_material_id = data_dict.get(self._default_approximate_diameter_for_quality_search) + if default_root_material_id is None: + default_root_material_id = list(data_dict.values())[0] # no default diameter present, just take "the" only one + for root_material_id in data_dict.values(): + self._diameter_material_map[root_material_id] = default_root_material_id + + # Map #4 + # "machine" -> "variant_name" -> "root material ID" -> specific material InstanceContainer + # Construct the "machine" -> "variant" -> "root material ID" -> specific material InstanceContainer + self._diameter_machine_variant_material_map = dict() + for material_metadata in material_metadata_list: + # We don't store empty material in the lookup tables + if material_metadata["id"] == "empty_material": + continue + + root_material_id = material_metadata["base_file"] + definition = material_metadata["definition"] + approximate_diameter = material_metadata["approximate_diameter"] + + if approximate_diameter not in self._diameter_machine_variant_material_map: + self._diameter_machine_variant_material_map[approximate_diameter] = {} + + machine_variant_material_map = self._diameter_machine_variant_material_map[approximate_diameter] + if definition not in machine_variant_material_map: + machine_variant_material_map[definition] = MaterialNode() + + machine_node = machine_variant_material_map[definition] + variant_name = material_metadata.get("variant_name") + if not variant_name: + # if there is no variant, this material is for the machine, so put its metadata in the machine node. + machine_node.material_map[root_material_id] = MaterialNode(material_metadata) + else: + # this material is variant-specific, so we save it in a variant-specific node under the + # machine-specific node + if variant_name not in machine_node.children_map: + machine_node.children_map[variant_name] = MaterialNode() + + variant_node = machine_node.children_map[variant_name] + if root_material_id not in variant_node.material_map: + variant_node.material_map[root_material_id] = MaterialNode(material_metadata) + else: + # Sanity check: make sure we don't have duplicated variant-specific materials for the same machine + raise RuntimeError("Found duplicate variant name [%s] for machine [%s] in material [%s]" % + (variant_name, definition, material_metadata["id"])) + + self.materialsUpdated.emit() + + def _updateMaps(self): + self.initialize() + + def _onContainerMetadataChanged(self, container): + self._onContainerChanged(container) + + def _onContainerChanged(self, container): + container_type = container.getMetaDataEntry("type") + if container_type != "material": + return + + # update the maps + self._update_timer.start() + + def getMaterialGroup(self, root_material_id: str) -> Optional[MaterialGroup]: + return self._material_group_map.get(root_material_id) + + def getRootMaterialIDForDiameter(self, root_material_id: str, approximate_diameter: str) -> str: + return self._material_diameter_map.get(root_material_id).get(approximate_diameter, root_material_id) + + def getRootMaterialIDWithoutDiameter(self, root_material_id: str) -> str: + return self._diameter_material_map.get(root_material_id) + + def getMaterialGroupListByGUID(self, guid: str) -> Optional[list]: + return self._guid_material_groups_map.get(guid) + + # + # Return a dict with all root material IDs (k) and ContainerNodes (v) that's suitable for the given setup. + # + def getAvailableMaterials(self, machine_definition_id: str, extruder_variant_name: Optional[str], + diameter: float) -> dict: + # round the diameter to get the approximate diameter + rounded_diameter = str(round(diameter)) + if rounded_diameter not in self._diameter_machine_variant_material_map: + Logger.log("i", "Cannot find materials with diameter [%s] (rounded to [%s])", diameter, rounded_diameter) + return dict() + + # If there are variant materials, get the variant material + machine_variant_material_map = self._diameter_machine_variant_material_map[rounded_diameter] + machine_node = machine_variant_material_map.get(machine_definition_id) + default_machine_node = machine_variant_material_map.get(self._default_machine_definition_id) + variant_node = None + if extruder_variant_name is not None and machine_node is not None: + variant_node = machine_node.getChildNode(extruder_variant_name) + + nodes_to_check = [variant_node, machine_node, default_machine_node] + + # Fallback mechanism of finding materials: + # 1. variant-specific material + # 2. machine-specific material + # 3. generic material (for fdmprinter) + material_id_metadata_dict = dict() + for node in nodes_to_check: + if node is not None: + for material_id, node in node.material_map.items(): + if material_id not in material_id_metadata_dict: + material_id_metadata_dict[material_id] = node + + return material_id_metadata_dict + + # + # A convenience function to get available materials for the given machine with the extruder position. + # + def getAvailableMaterialsForMachineExtruder(self, machine: "GlobalStack", + extruder_stack: "ExtruderStack") -> Optional[dict]: + machine_definition_id = machine.definition.getId() + variant_name = None + if extruder_stack.variant.getId() != "empty_variant": + variant_name = extruder_stack.variant.getName() + diameter = extruder_stack.approximateMaterialDiameter + + # Fetch the available materials (ContainerNode) for the current active machine and extruder setup. + return self.getAvailableMaterials(machine_definition_id, variant_name, diameter) + + # + # Gets MaterialNode for the given extruder and machine with the given material name. + # Returns None if: + # 1. the given machine doesn't have materials; + # 2. cannot find any material InstanceContainers with the given settings. + # + def getMaterialNode(self, machine_definition_id: str, extruder_variant_name: Optional[str], + diameter: float, root_material_id: str) -> Optional["InstanceContainer"]: + # round the diameter to get the approximate diameter + rounded_diameter = str(round(diameter)) + if rounded_diameter not in self._diameter_machine_variant_material_map: + Logger.log("i", "Cannot find materials with diameter [%s] (rounded to [%s]) for root material id [%s]", + diameter, rounded_diameter, root_material_id) + return None + + # If there are variant materials, get the variant material + machine_variant_material_map = self._diameter_machine_variant_material_map[rounded_diameter] + machine_node = machine_variant_material_map.get(machine_definition_id) + variant_node = None + + # Fallback for "fdmprinter" if the machine-specific materials cannot be found + if machine_node is None: + machine_node = machine_variant_material_map.get(self._default_machine_definition_id) + if machine_node is not None and extruder_variant_name is not None: + variant_node = machine_node.getChildNode(extruder_variant_name) + + # Fallback mechanism of finding materials: + # 1. variant-specific material + # 2. machine-specific material + # 3. generic material (for fdmprinter) + nodes_to_check = [variant_node, machine_node, + machine_variant_material_map.get(self._default_machine_definition_id)] + + material_node = None + for node in nodes_to_check: + if node is not None: + material_node = node.material_map.get(root_material_id) + if material_node: + break + + return material_node + + # + # Used by QualityManager. Built-in quality profiles may be based on generic material IDs such as "generic_pla". + # For materials such as ultimaker_pla_orange, no quality profiles may be found, so we should fall back to use + # the generic material IDs to search for qualities. + # + # An example would be, suppose we have machine with preferred material set to "filo3d_pla" (1.75mm), but its + # extruders only use 2.85mm materials, then we won't be able to find the preferred material for this machine. + # A fallback would be to fetch a generic material of the same type "PLA" as "filo3d_pla", and in this case it will + # be "generic_pla". This function is intended to get a generic fallback material for the given material type. + # + # This function returns the generic root material ID for the given material type, where material types are "PLA", + # "ABS", etc. + # + def getFallbackMaterialIdByMaterialType(self, material_type: str) -> Optional[str]: + # For safety + if material_type not in self._fallback_materials_map: + Logger.log("w", "The material type [%s] does not have a fallback material" % material_type) + return None + fallback_material = self._fallback_materials_map[material_type] + if fallback_material: + return self.getRootMaterialIDWithoutDiameter(fallback_material["id"]) + else: + return None + + def getDefaultMaterial(self, global_stack: "GlobalStack", extruder_variant_name: str) -> Optional["MaterialNode"]: + node = None + machine_definition = global_stack.definition + if parseBool(machine_definition.getMetaDataEntry("has_materials", False)): + material_diameter = machine_definition.getProperty("material_diameter", "value") + if isinstance(material_diameter, SettingFunction): + material_diameter = material_diameter(global_stack) + approximate_material_diameter = str(round(material_diameter)) + root_material_id = machine_definition.getMetaDataEntry("preferred_material") + root_material_id = self.getRootMaterialIDForDiameter(root_material_id, approximate_material_diameter) + node = self.getMaterialNode(machine_definition.getId(), extruder_variant_name, + material_diameter, root_material_id) + return node + + # + # Methods for GUI + # + + # + # Sets the new name for the given material. + # + @pyqtSlot("QVariant", str) + def setMaterialName(self, material_node: "MaterialNode", name: str): + root_material_id = material_node.metadata["base_file"] + if self._container_registry.isReadOnly(root_material_id): + Logger.log("w", "Cannot set name of read-only container %s.", root_material_id) + return + + material_group = self.getMaterialGroup(root_material_id) + material_group.root_material_node.getContainer().setName(name) + + # + # Removes the given material. + # + @pyqtSlot("QVariant") + def removeMaterial(self, material_node: "MaterialNode"): + root_material_id = material_node.metadata["base_file"] + material_group = self.getMaterialGroup(root_material_id) + if not material_group: + Logger.log("d", "Unable to remove the material with id %s, because it doesn't exist.", root_material_id) + return + + nodes_to_remove = [material_group.root_material_node] + material_group.derived_material_node_list + for node in nodes_to_remove: + self._container_registry.removeContainer(node.metadata["id"]) + + # + # Creates a duplicate of a material, which has the same GUID and base_file metadata. + # Returns the root material ID of the duplicated material if successful. + # + @pyqtSlot("QVariant", result = str) + def duplicateMaterial(self, material_node, new_base_id = None, new_metadata = None) -> Optional[str]: + root_material_id = material_node.metadata["base_file"] + + material_group = self.getMaterialGroup(root_material_id) + if not material_group: + Logger.log("i", "Unable to duplicate the material with id %s, because it doesn't exist.", root_material_id) + return None + + base_container = material_group.root_material_node.getContainer() + + # Ensure all settings are saved. + self._application.saveSettings() + + # Create a new ID & container to hold the data. + new_containers = [] + if new_base_id is None: + new_base_id = self._container_registry.uniqueName(base_container.getId()) + new_base_container = copy.deepcopy(base_container) + new_base_container.getMetaData()["id"] = new_base_id + new_base_container.getMetaData()["base_file"] = new_base_id + if new_metadata is not None: + for key, value in new_metadata.items(): + new_base_container.getMetaData()[key] = value + new_containers.append(new_base_container) + + # Clone all of them. + for node in material_group.derived_material_node_list: + container_to_copy = node.getContainer() + # Create unique IDs for every clone. + new_id = new_base_id + if container_to_copy.getMetaDataEntry("definition") != "fdmprinter": + new_id += "_" + container_to_copy.getMetaDataEntry("definition") + if container_to_copy.getMetaDataEntry("variant_name"): + variant_name = container_to_copy.getMetaDataEntry("variant_name") + new_id += "_" + variant_name.replace(" ", "_") + + new_container = copy.deepcopy(container_to_copy) + new_container.getMetaData()["id"] = new_id + new_container.getMetaData()["base_file"] = new_base_id + if new_metadata is not None: + for key, value in new_metadata.items(): + new_container.getMetaData()[key] = value + + new_containers.append(new_container) + + for container_to_add in new_containers: + container_to_add.setDirty(True) + self._container_registry.addContainer(container_to_add) + return new_base_id + + # + # Create a new material by cloning Generic PLA for the current material diameter and generate a new GUID. + # + @pyqtSlot(result = str) + def createMaterial(self) -> str: + from UM.i18n import i18nCatalog + catalog = i18nCatalog("cura") + # Ensure all settings are saved. + self._application.saveSettings() + + global_stack = self._application.getGlobalContainerStack() + approximate_diameter = str(round(global_stack.getProperty("material_diameter", "value"))) + root_material_id = "generic_pla" + root_material_id = self.getRootMaterialIDForDiameter(root_material_id, approximate_diameter) + material_group = self.getMaterialGroup(root_material_id) + + # Create a new ID & container to hold the data. + new_id = self._container_registry.uniqueName("custom_material") + new_metadata = {"name": catalog.i18nc("@label", "Custom Material"), + "brand": catalog.i18nc("@label", "Custom"), + "GUID": str(uuid.uuid4()), + } + + self.duplicateMaterial(material_group.root_material_node, + new_base_id = new_id, + new_metadata = new_metadata) + return new_id diff --git a/cura/Machines/MaterialNode.py b/cura/Machines/MaterialNode.py new file mode 100644 index 0000000000..fde11186c2 --- /dev/null +++ b/cura/Machines/MaterialNode.py @@ -0,0 +1,21 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from typing import Optional + +from .ContainerNode import ContainerNode + + +# +# A MaterialNode is a node in the material lookup tree/map/table. It contains 2 (extra) fields: +# - material_map: a one-to-one map of "material_root_id" to material_node. +# - children_map: the key-value map for child nodes of this node. This is used in a lookup tree. +# +# +class MaterialNode(ContainerNode): + __slots__ = ("material_map", "children_map") + + def __init__(self, metadata: Optional[dict] = None): + super().__init__(metadata = metadata) + self.material_map = {} # material_root_id -> material_node + self.children_map = {} # mapping for the child nodes diff --git a/cura/Machines/Models/BaseMaterialsModel.py b/cura/Machines/Models/BaseMaterialsModel.py new file mode 100644 index 0000000000..de0c68d60a --- /dev/null +++ b/cura/Machines/Models/BaseMaterialsModel.py @@ -0,0 +1,46 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from PyQt5.QtCore import Qt, pyqtSignal, pyqtProperty + +from UM.Qt.ListModel import ListModel + + +# +# This is the base model class for GenericMaterialsModel and BrandMaterialsModel +# Those 2 models are used by the material drop down menu to show generic materials and branded materials separately. +# The extruder position defined here is being used to bound a menu to the correct extruder. This is used in the top +# bar menu "Settings" -> "Extruder nr" -> "Material" -> this menu +# +class BaseMaterialsModel(ListModel): + RootMaterialIdRole = Qt.UserRole + 1 + IdRole = Qt.UserRole + 2 + NameRole = Qt.UserRole + 3 + BrandRole = Qt.UserRole + 4 + MaterialRole = Qt.UserRole + 5 + ColorRole = Qt.UserRole + 6 + ContainerNodeRole = Qt.UserRole + 7 + + extruderPositionChanged = pyqtSignal() + + def __init__(self, parent = None): + super().__init__(parent) + + self.addRoleName(self.RootMaterialIdRole, "root_material_id") + self.addRoleName(self.IdRole, "id") + self.addRoleName(self.NameRole, "name") + self.addRoleName(self.BrandRole, "brand") + self.addRoleName(self.MaterialRole, "material") + self.addRoleName(self.ColorRole, "color_name") + self.addRoleName(self.ContainerNodeRole, "container_node") + + self._extruder_position = 0 + + def setExtruderPosition(self, position: int): + if self._extruder_position != position: + self._extruder_position = position + self.extruderPositionChanged.emit() + + @pyqtProperty(int, fset = setExtruderPosition, notify = extruderPositionChanged) + def extruderPosition(self) -> int: + return self._extruder_positoin diff --git a/cura/Machines/Models/BrandMaterialsModel.py b/cura/Machines/Models/BrandMaterialsModel.py new file mode 100644 index 0000000000..6628d924f1 --- /dev/null +++ b/cura/Machines/Models/BrandMaterialsModel.py @@ -0,0 +1,131 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from PyQt5.QtCore import Qt, pyqtSignal, pyqtProperty + +from UM.Qt.ListModel import ListModel + +from .BaseMaterialsModel import BaseMaterialsModel + + +# +# This is an intermediate model to group materials with different colours for a same brand and type. +# +class MaterialsModelGroupedByType(ListModel): + NameRole = Qt.UserRole + 1 + ColorsRole = Qt.UserRole + 2 + + def __init__(self, parent = None): + super().__init__(parent) + + self.addRoleName(self.NameRole, "name") + self.addRoleName(self.ColorsRole, "colors") + + +# +# This model is used to show branded materials in the material drop down menu. +# The structure of the menu looks like this: +# Brand -> Material Type -> list of materials +# +# To illustrate, a branded material menu may look like this: +# Ultimaker -> PLA -> Yellow PLA +# -> Black PLA +# -> ... +# -> ABS -> White ABS +# ... +# +class BrandMaterialsModel(ListModel): + NameRole = Qt.UserRole + 1 + MaterialsRole = Qt.UserRole + 2 + + extruderPositionChanged = pyqtSignal() + + def __init__(self, parent = None): + super().__init__(parent) + + self.addRoleName(self.NameRole, "name") + self.addRoleName(self.MaterialsRole, "materials") + + self._extruder_position = 0 + + from cura.CuraApplication import CuraApplication + self._machine_manager = CuraApplication.getInstance().getMachineManager() + self._extruder_manager = CuraApplication.getInstance().getExtruderManager() + self._material_manager = CuraApplication.getInstance().getMaterialManager() + + self._machine_manager.globalContainerChanged.connect(self._update) + self._extruder_manager.activeExtruderChanged.connect(self._update) + self._material_manager.materialsUpdated.connect(self._update) + + self._update() + + def setExtruderPosition(self, position: int): + if self._extruder_position != position: + self._extruder_position = position + self.extruderPositionChanged.emit() + + @pyqtProperty(int, fset = setExtruderPosition, notify = extruderPositionChanged) + def extruderPosition(self) -> int: + return self._extruder_position + + def _update(self): + global_stack = self._machine_manager.activeMachine + if global_stack is None: + self.setItems([]) + return + extruder_position = str(self._extruder_position) + if extruder_position not in global_stack.extruders: + self.setItems([]) + return + extruder_stack = global_stack.extruders[str(self._extruder_position)] + + available_material_dict = self._material_manager.getAvailableMaterialsForMachineExtruder(global_stack, + extruder_stack) + if available_material_dict is None: + self.setItems([]) + return + + brand_item_list = [] + brand_group_dict = {} + for root_material_id, container_node in available_material_dict.items(): + metadata = container_node.metadata + brand = metadata["brand"] + # Only add results for generic materials + if brand.lower() == "generic": + continue + + if brand not in brand_group_dict: + brand_group_dict[brand] = {} + + material_type = metadata["material"] + if material_type not in brand_group_dict[brand]: + brand_group_dict[brand][material_type] = [] + + item = {"root_material_id": root_material_id, + "id": metadata["id"], + "name": metadata["name"], + "brand": metadata["brand"], + "material": metadata["material"], + "color_name": metadata["color_name"], + "container_node": container_node + } + brand_group_dict[brand][material_type].append(item) + + for brand, material_dict in brand_group_dict.items(): + brand_item = {"name": brand, + "materials": MaterialsModelGroupedByType(self)} + + material_type_item_list = [] + for material_type, material_list in material_dict.items(): + material_type_item = {"name": material_type, + "colors": BaseMaterialsModel(self)} + material_type_item["colors"].clear() + material_type_item["colors"].setItems(material_list) + + material_type_item_list.append(material_type_item) + + brand_item["materials"].setItems(material_type_item_list) + + brand_item_list.append(brand_item) + + self.setItems(brand_item_list) diff --git a/cura/Machines/Models/BuildPlateModel.py b/cura/Machines/Models/BuildPlateModel.py new file mode 100644 index 0000000000..1cb94216a6 --- /dev/null +++ b/cura/Machines/Models/BuildPlateModel.py @@ -0,0 +1,49 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from PyQt5.QtCore import Qt + +from UM.Application import Application +from UM.Qt.ListModel import ListModel +from UM.Util import parseBool + +from cura.Machines.VariantManager import VariantType + + +class BuildPlateModel(ListModel): + NameRole = Qt.UserRole + 1 + ContainerNodeRole = Qt.UserRole + 2 + + def __init__(self, parent = None): + super().__init__(parent) + + self.addRoleName(self.NameRole, "name") + self.addRoleName(self.ContainerNodeRole, "container_node") + + self._application = Application.getInstance() + self._variant_manager = self._application._variant_manager + self._machine_manager = self._application.getMachineManager() + + self._machine_manager.globalContainerChanged.connect(self._update) + + self._update() + + def _update(self): + global_stack = self._machine_manager._global_container_stack + if not global_stack: + self.setItems([]) + return + + has_variants = parseBool(global_stack.getMetaDataEntry("has_variant_buildplates", False)) + if not has_variants: + self.setItems([]) + return + + variant_dict = self._variant_manager.getVariantNodes(global_stack, variant_type = VariantType.BUILD_PLATE) + + item_list = [] + for name, variant_node in variant_dict.items(): + item = {"name": name, + "container_node": variant_node} + item_list.append(item) + self.setItems(item_list) diff --git a/cura/Machines/Models/CustomQualityProfilesDropDownMenuModel.py b/cura/Machines/Models/CustomQualityProfilesDropDownMenuModel.py new file mode 100644 index 0000000000..0d297379cd --- /dev/null +++ b/cura/Machines/Models/CustomQualityProfilesDropDownMenuModel.py @@ -0,0 +1,37 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from UM.Logger import Logger + +from cura.Machines.Models.QualityProfilesDropDownMenuModel import QualityProfilesDropDownMenuModel + + +# +# This model is used for the custom profile items in the profile drop down menu. +# +class CustomQualityProfilesDropDownMenuModel(QualityProfilesDropDownMenuModel): + + def _update(self): + Logger.log("d", "Updating %s ...", self.__class__.__name__) + + active_global_stack = self._machine_manager.activeMachine + if active_global_stack is None: + self.setItems([]) + Logger.log("d", "No active GlobalStack, set %s as empty.", self.__class__.__name__) + return + + quality_changes_group_dict = self._quality_manager.getQualityChangesGroups(active_global_stack) + + item_list = [] + for key in sorted(quality_changes_group_dict): + quality_changes_group = quality_changes_group_dict[key] + + item = {"name": quality_changes_group.name, + "layer_height": "", + "layer_height_without_unit": "", + "available": quality_changes_group.is_available, + "quality_changes_group": quality_changes_group} + + item_list.append(item) + + self.setItems(item_list) diff --git a/cura/Machines/Models/GenericMaterialsModel.py b/cura/Machines/Models/GenericMaterialsModel.py new file mode 100644 index 0000000000..d20fc05b6e --- /dev/null +++ b/cura/Machines/Models/GenericMaterialsModel.py @@ -0,0 +1,60 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from .BaseMaterialsModel import BaseMaterialsModel + + +class GenericMaterialsModel(BaseMaterialsModel): + + def __init__(self, parent = None): + super().__init__(parent) + + from cura.CuraApplication import CuraApplication + self._machine_manager = CuraApplication.getInstance().getMachineManager() + self._extruder_manager = CuraApplication.getInstance().getExtruderManager() + self._material_manager = CuraApplication.getInstance().getMaterialManager() + + self._machine_manager.globalContainerChanged.connect(self._update) + self._extruder_manager.activeExtruderChanged.connect(self._update) + self._material_manager.materialsUpdated.connect(self._update) + + self._update() + + def _update(self): + global_stack = self._machine_manager.activeMachine + if global_stack is None: + self.setItems([]) + return + extruder_position = str(self._extruder_position) + if extruder_position not in global_stack.extruders: + self.setItems([]) + return + extruder_stack = global_stack.extruders[extruder_position] + + available_material_dict = self._material_manager.getAvailableMaterialsForMachineExtruder(global_stack, + extruder_stack) + if available_material_dict is None: + self.setItems([]) + return + + item_list = [] + for root_material_id, container_node in available_material_dict.items(): + metadata = container_node.metadata + # Only add results for generic materials + if metadata["brand"].lower() != "generic": + continue + + item = {"root_material_id": root_material_id, + "id": metadata["id"], + "name": metadata["name"], + "brand": metadata["brand"], + "material": metadata["material"], + "color_name": metadata["color_name"], + "container_node": container_node + } + item_list.append(item) + + # Sort the item list by material name alphabetically + item_list = sorted(item_list, key = lambda d: d["name"]) + + self.setItems(item_list) diff --git a/cura/Machines/Models/MaterialManagementModel.py b/cura/Machines/Models/MaterialManagementModel.py new file mode 100644 index 0000000000..b250232282 --- /dev/null +++ b/cura/Machines/Models/MaterialManagementModel.py @@ -0,0 +1,101 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from PyQt5.QtCore import Qt, pyqtProperty + +from UM.Qt.ListModel import ListModel + + +# +# This model is for the Material management page. +# +class MaterialManagementModel(ListModel): + RootMaterialIdRole = Qt.UserRole + 1 + DisplayNameRole = Qt.UserRole + 2 + BrandRole = Qt.UserRole + 3 + MaterialTypeRole = Qt.UserRole + 4 + ColorNameRole = Qt.UserRole + 5 + ColorCodeRole = Qt.UserRole + 6 + ContainerNodeRole = Qt.UserRole + 7 + ContainerIdRole = Qt.UserRole + 8 + + DescriptionRole = Qt.UserRole + 9 + AdhesionInfoRole = Qt.UserRole + 10 + ApproximateDiameterRole = Qt.UserRole + 11 + GuidRole = Qt.UserRole + 12 + DensityRole = Qt.UserRole + 13 + DiameterRole = Qt.UserRole + 14 + IsReadOnlyRole = Qt.UserRole + 15 + + def __init__(self, parent = None): + super().__init__(parent) + + self.addRoleName(self.RootMaterialIdRole, "root_material_id") + self.addRoleName(self.DisplayNameRole, "name") + self.addRoleName(self.BrandRole, "brand") + self.addRoleName(self.MaterialTypeRole, "material") + self.addRoleName(self.ColorNameRole, "color_name") + self.addRoleName(self.ColorCodeRole, "color_code") + self.addRoleName(self.ContainerNodeRole, "container_node") + self.addRoleName(self.ContainerIdRole, "container_id") + + self.addRoleName(self.DescriptionRole, "description") + self.addRoleName(self.AdhesionInfoRole, "adhesion_info") + self.addRoleName(self.ApproximateDiameterRole, "approximate_diameter") + self.addRoleName(self.GuidRole, "guid") + self.addRoleName(self.DensityRole, "density") + self.addRoleName(self.DiameterRole, "diameter") + self.addRoleName(self.IsReadOnlyRole, "is_read_only") + + from cura.CuraApplication import CuraApplication + self._container_registry = CuraApplication.getInstance().getContainerRegistry() + self._machine_manager = CuraApplication.getInstance().getMachineManager() + self._extruder_manager = CuraApplication.getInstance().getExtruderManager() + self._material_manager = CuraApplication.getInstance().getMaterialManager() + + self._machine_manager.globalContainerChanged.connect(self._update) + self._extruder_manager.activeExtruderChanged.connect(self._update) + self._material_manager.materialsUpdated.connect(self._update) + + self._update() + + def _update(self): + global_stack = self._machine_manager.activeMachine + if global_stack is None: + self.setItems([]) + return + active_extruder_stack = self._machine_manager.activeStack + + available_material_dict = self._material_manager.getAvailableMaterialsForMachineExtruder(global_stack, + active_extruder_stack) + if available_material_dict is None: + self.setItems([]) + return + + material_list = [] + for root_material_id, container_node in available_material_dict.items(): + keys_to_fetch = ("name", + "brand", + "material", + "color_name", + "color_code", + "description", + "adhesion_info", + "approximate_diameter",) + + item = {"root_material_id": container_node.metadata["base_file"], + "container_node": container_node, + "guid": container_node.metadata["GUID"], + "container_id": container_node.metadata["id"], + "density": container_node.metadata.get("properties", {}).get("density", ""), + "diameter": container_node.metadata.get("properties", {}).get("diameter", ""), + "is_read_only": self._container_registry.isReadOnly(container_node.metadata["id"]), + } + + for key in keys_to_fetch: + item[key] = container_node.metadata.get(key, "") + + material_list.append(item) + + material_list = sorted(material_list, key = lambda k: (k["brand"].lower(), k["name"])) + self.setItems(material_list) diff --git a/cura/BuildPlateModel.py b/cura/Machines/Models/MultiBuildPlateModel.py similarity index 70% rename from cura/BuildPlateModel.py rename to cura/Machines/Models/MultiBuildPlateModel.py index 73f61202c6..f0f4997014 100644 --- a/cura/BuildPlateModel.py +++ b/cura/Machines/Models/MultiBuildPlateModel.py @@ -1,24 +1,32 @@ -from PyQt5.QtCore import pyqtSignal, pyqtProperty, pyqtSlot +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from PyQt5.QtCore import pyqtSignal, pyqtProperty -from UM.Qt.ListModel import ListModel -from UM.Scene.Selection import Selection -from UM.Logger import Logger from UM.Application import Application +from UM.Scene.Selection import Selection +from UM.Qt.ListModel import ListModel -class BuildPlateModel(ListModel): +# +# This is the model for multi build plate feature. +# This has nothing to do with the build plate types you can choose on the sidebar for a machine. +# +class MultiBuildPlateModel(ListModel): + maxBuildPlateChanged = pyqtSignal() activeBuildPlateChanged = pyqtSignal() selectionChanged = pyqtSignal() - def __init__(self): - super().__init__() - Application.getInstance().getController().getScene().sceneChanged.connect(self._updateSelectedObjectBuildPlateNumbers) + def __init__(self, parent = None): + super().__init__(parent) + + self._application = Application.getInstance() + self._application.getController().getScene().sceneChanged.connect(self._updateSelectedObjectBuildPlateNumbers) Selection.selectionChanged.connect(self._updateSelectedObjectBuildPlateNumbers) self._max_build_plate = 1 # default self._active_build_plate = -1 - self._selection_build_plates = [] def setMaxBuildPlate(self, max_build_plate): self._max_build_plate = max_build_plate @@ -37,10 +45,6 @@ class BuildPlateModel(ListModel): def activeBuildPlate(self): return self._active_build_plate - @staticmethod - def createBuildPlateModel(): - return BuildPlateModel() - def _updateSelectedObjectBuildPlateNumbers(self, *args): result = set() for node in Selection.getAllSelectedObjects(): diff --git a/cura/Machines/Models/NozzleModel.py b/cura/Machines/Models/NozzleModel.py new file mode 100644 index 0000000000..19d4a800c8 --- /dev/null +++ b/cura/Machines/Models/NozzleModel.py @@ -0,0 +1,56 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from PyQt5.QtCore import Qt + +from UM.Application import Application +from UM.Qt.ListModel import ListModel +from UM.Util import parseBool + + +class NozzleModel(ListModel): + IdRole = Qt.UserRole + 1 + HotendNameRole = Qt.UserRole + 2 + ContainerNodeRole = Qt.UserRole + 3 + + def __init__(self, parent = None): + super().__init__(parent) + + self.addRoleName(self.IdRole, "id") + self.addRoleName(self.HotendNameRole, "hotend_name") + self.addRoleName(self.ContainerNodeRole, "container_node") + + Application.getInstance().globalContainerStackChanged.connect(self._update) + Application.getInstance().getMachineManager().activeVariantChanged.connect(self._update) + Application.getInstance().getMachineManager().activeStackChanged.connect(self._update) + Application.getInstance().getMachineManager().activeMaterialChanged.connect(self._update) + + def _update(self): + self.items.clear() + + variant_manager = Application.getInstance()._variant_manager + active_global_stack = Application.getInstance().getMachineManager()._global_container_stack + if active_global_stack is None: + self.setItems([]) + return + + has_variants = parseBool(active_global_stack.getMetaDataEntry("has_variants", False)) + if not has_variants: + self.setItems([]) + return + + variant_node_dict = variant_manager.getVariantNodes(active_global_stack) + if not variant_node_dict: + self.setItems([]) + return + + item_list = [] + for hotend_name, container_node in sorted(variant_node_dict.items(), key = lambda i: i[0]): + item = {"id": hotend_name, + "hotend_name": hotend_name, + "container_node": container_node + } + + item_list.append(item) + + self.setItems(item_list) diff --git a/cura/Machines/Models/QualityManagementModel.py b/cura/Machines/Models/QualityManagementModel.py new file mode 100644 index 0000000000..e089f92329 --- /dev/null +++ b/cura/Machines/Models/QualityManagementModel.py @@ -0,0 +1,122 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from PyQt5.QtCore import Qt, pyqtSlot + +from UM.Qt.ListModel import ListModel + + +# +# This the QML model for the quality management page. +# +class QualityManagementModel(ListModel): + NameRole = Qt.UserRole + 1 + IsReadOnlyRole = Qt.UserRole + 2 + QualityGroupRole = Qt.UserRole + 3 + QualityChangesGroupRole = Qt.UserRole + 4 + + def __init__(self, parent = None): + super().__init__(parent) + + self.addRoleName(self.NameRole, "name") + self.addRoleName(self.IsReadOnlyRole, "is_read_only") + self.addRoleName(self.QualityGroupRole, "quality_group") + self.addRoleName(self.QualityChangesGroupRole, "quality_changes_group") + + from cura.CuraApplication import CuraApplication + self._container_registry = CuraApplication.getInstance().getContainerRegistry() + self._machine_manager = CuraApplication.getInstance().getMachineManager() + self._extruder_manager = CuraApplication.getInstance().getExtruderManager() + self._quality_manager = CuraApplication.getInstance().getQualityManager() + + self._machine_manager.globalContainerChanged.connect(self._update) + self._quality_manager.qualitiesUpdated.connect(self._update) + + self._update() + + def _update(self): + global_stack = self._machine_manager.activeMachine + + quality_group_dict = self._quality_manager.getQualityGroups(global_stack) + quality_changes_group_dict = self._quality_manager.getQualityChangesGroups(global_stack) + + available_quality_types = set(quality_type for quality_type, quality_group in quality_group_dict.items() + if quality_group.is_available) + if not available_quality_types and not quality_changes_group_dict: + # Nothing to show + self.setItems([]) + return + + item_list = [] + # Create quality group items + for quality_group in quality_group_dict.values(): + if not quality_group.is_available: + continue + + item = {"name": quality_group.name, + "is_read_only": True, + "quality_group": quality_group, + "quality_changes_group": None} + item_list.append(item) + # Sort by quality names + item_list = sorted(item_list, key = lambda x: x["name"]) + + # Create quality_changes group items + quality_changes_item_list = [] + for quality_changes_group in quality_changes_group_dict.values(): + if quality_changes_group.quality_type not in available_quality_types: + continue + quality_group = quality_group_dict[quality_changes_group.quality_type] + item = {"name": quality_changes_group.name, + "is_read_only": False, + "quality_group": quality_group, + "quality_changes_group": quality_changes_group} + quality_changes_item_list.append(item) + + # Sort quality_changes items by names and append to the item list + quality_changes_item_list = sorted(quality_changes_item_list, key = lambda x: x["name"]) + item_list += quality_changes_item_list + + self.setItems(item_list) + + # TODO: Duplicated code here from InstanceContainersModel. Refactor and remove this later. + # + ## Gets a list of the possible file filters that the plugins have + # registered they can read or write. The convenience meta-filters + # "All Supported Types" and "All Files" are added when listing + # readers, but not when listing writers. + # + # \param io_type \type{str} name of the needed IO type + # \return A list of strings indicating file name filters for a file + # dialog. + @pyqtSlot(str, result = "QVariantList") + def getFileNameFilters(self, io_type): + from UM.i18n import i18nCatalog + catalog = i18nCatalog("uranium") + #TODO: This function should be in UM.Resources! + filters = [] + all_types = [] + for plugin_id, meta_data in self._getIOPlugins(io_type): + for io_plugin in meta_data[io_type]: + filters.append(io_plugin["description"] + " (*." + io_plugin["extension"] + ")") + all_types.append("*.{0}".format(io_plugin["extension"])) + + if "_reader" in io_type: + # if we're listing readers, add the option to show all supported files as the default option + filters.insert(0, catalog.i18nc("@item:inlistbox", "All Supported Types ({0})", " ".join(all_types))) + filters.append(catalog.i18nc("@item:inlistbox", "All Files (*)")) # Also allow arbitrary files, if the user so prefers. + return filters + + ## Gets a list of profile reader or writer plugins + # \return List of tuples of (plugin_id, meta_data). + def _getIOPlugins(self, io_type): + from UM.PluginRegistry import PluginRegistry + pr = PluginRegistry.getInstance() + active_plugin_ids = pr.getActivePlugins() + + result = [] + for plugin_id in active_plugin_ids: + meta_data = pr.getMetaData(plugin_id) + if io_type in meta_data: + result.append( (plugin_id, meta_data) ) + return result diff --git a/cura/Machines/Models/QualityProfilesDropDownMenuModel.py b/cura/Machines/Models/QualityProfilesDropDownMenuModel.py new file mode 100644 index 0000000000..fd919639c3 --- /dev/null +++ b/cura/Machines/Models/QualityProfilesDropDownMenuModel.py @@ -0,0 +1,106 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from PyQt5.QtCore import Qt + +from UM.Application import Application +from UM.Logger import Logger +from UM.Qt.ListModel import ListModel + +from cura.Machines.QualityManager import QualityGroup + + +# +# QML Model for all built-in quality profiles. This model is used for the drop-down quality menu. +# +class QualityProfilesDropDownMenuModel(ListModel): + NameRole = Qt.UserRole + 1 + QualityTypeRole = Qt.UserRole + 2 + LayerHeightRole = Qt.UserRole + 3 + LayerHeightUnitRole = Qt.UserRole + 4 + AvailableRole = Qt.UserRole + 5 + QualityGroupRole = Qt.UserRole + 6 + QualityChangesGroupRole = Qt.UserRole + 7 + + def __init__(self, parent = None): + super().__init__(parent) + + self.addRoleName(self.NameRole, "name") + self.addRoleName(self.QualityTypeRole, "quality_type") + self.addRoleName(self.LayerHeightRole, "layer_height") + self.addRoleName(self.LayerHeightUnitRole, "layer_height_unit") + self.addRoleName(self.AvailableRole, "available") + self.addRoleName(self.QualityGroupRole, "quality_group") + self.addRoleName(self.QualityChangesGroupRole, "quality_changes_group") + + self._application = Application.getInstance() + self._machine_manager = self._application.getMachineManager() + self._quality_manager = Application.getInstance().getQualityManager() + + self._application.globalContainerStackChanged.connect(self._update) + self._machine_manager.activeQualityGroupChanged.connect(self._update) + self._quality_manager.qualitiesUpdated.connect(self._update) + + self._layer_height_unit = "" # This is cached + + self._update() + + def _update(self): + Logger.log("d", "Updating quality profile model ...") + + global_stack = self._machine_manager.activeMachine + if global_stack is None: + self.setItems([]) + Logger.log("d", "No active GlobalStack, set quality profile model as empty.") + return + + # Check for material compatibility + if not self._machine_manager.activeMaterialsCompatible(): + Logger.log("d", "No active material compatibility, set quality profile model as empty.") + self.setItems([]) + return + + quality_group_dict = self._quality_manager.getQualityGroups(global_stack) + + item_list = [] + for key in sorted(quality_group_dict): + quality_group = quality_group_dict[key] + + layer_height = self._fetchLayerHeight(quality_group) + + item = {"name": quality_group.name, + "quality_type": quality_group.quality_type, + "layer_height": layer_height, + "layer_height_unit": self._layer_height_unit, + "available": quality_group.is_available, + "quality_group": quality_group} + + item_list.append(item) + + # Sort items based on layer_height + item_list = sorted(item_list, key = lambda x: x["layer_height"]) + + self.setItems(item_list) + + def _fetchLayerHeight(self, quality_group: "QualityGroup"): + global_stack = self._machine_manager.activeMachine + if not self._layer_height_unit: + unit = global_stack.definition.getProperty("layer_height", "unit") + if not unit: + unit = "" + self._layer_height_unit = unit + + default_layer_height = global_stack.definition.getProperty("layer_height", "value") + + # Get layer_height from the quality profile for the GlobalStack + container = quality_group.node_for_global.getContainer() + + layer_height = default_layer_height + if container.hasProperty("layer_height", "value"): + layer_height = container.getProperty("layer_height", "value") + else: + # Look for layer_height in the GlobalStack from material -> definition + container = global_stack.definition + if container.hasProperty("layer_height", "value"): + layer_height = container.getProperty("layer_height", "value") + return float(layer_height) diff --git a/cura/Machines/Models/QualitySettingsModel.py b/cura/Machines/Models/QualitySettingsModel.py new file mode 100644 index 0000000000..38b7ec28e4 --- /dev/null +++ b/cura/Machines/Models/QualitySettingsModel.py @@ -0,0 +1,159 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from PyQt5.QtCore import pyqtProperty, pyqtSignal, Qt + +from UM.Application import Application +from UM.Logger import Logger +from UM.Qt.ListModel import ListModel +from UM.Settings.ContainerRegistry import ContainerRegistry + + +# +# This model is used to show details settings of the selected quality in the quality management page. +# +class QualitySettingsModel(ListModel): + KeyRole = Qt.UserRole + 1 + LabelRole = Qt.UserRole + 2 + UnitRole = Qt.UserRole + 3 + ProfileValueRole = Qt.UserRole + 4 + ProfileValueSourceRole = Qt.UserRole + 5 + UserValueRole = Qt.UserRole + 6 + CategoryRole = Qt.UserRole + 7 + + def __init__(self, parent = None): + super().__init__(parent = parent) + + self.addRoleName(self.KeyRole, "key") + self.addRoleName(self.LabelRole, "label") + self.addRoleName(self.UnitRole, "unit") + self.addRoleName(self.ProfileValueRole, "profile_value") + self.addRoleName(self.ProfileValueSourceRole, "profile_value_source") + self.addRoleName(self.UserValueRole, "user_value") + self.addRoleName(self.CategoryRole, "category") + + self._container_registry = ContainerRegistry.getInstance() + self._application = Application.getInstance() + self._quality_manager = self._application.getQualityManager() + + self._selected_position = "" # empty string means GlobalStack + # strings such as "0", "1", etc. mean extruder positions + self._selected_quality_item = None # The selected quality in the quality management page + self._i18n_catalog = None + + self._quality_manager.qualitiesUpdated.connect(self._update) + + self._update() + + selectedPositionChanged = pyqtSignal() + selectedQualityItemChanged = pyqtSignal() + + def setSelectedPosition(self, selected_position): + if selected_position != self._selected_position: + self._selected_position = selected_position + self.selectedPositionChanged.emit() + self._update() + + @pyqtProperty(str, fset = setSelectedPosition, notify = selectedPositionChanged) + def selectedPosition(self): + return self._selected_position + + def setSelectedQualityItem(self, selected_quality_item): + if selected_quality_item != self._selected_quality_item: + self._selected_quality_item = selected_quality_item + self.selectedQualityItemChanged.emit() + self._update() + + @pyqtProperty("QVariantMap", fset = setSelectedQualityItem, notify = selectedQualityItemChanged) + def selectedQualityItem(self): + return self._selected_quality_item + + def _update(self): + if self._selected_quality_item is None: + self.setItems([]) + return + + items = [] + + global_container_stack = self._application.getGlobalContainerStack() + definition_container = global_container_stack.definition + + quality_group = self._selected_quality_item["quality_group"] + quality_changes_group = self._selected_quality_item["quality_changes_group"] + + if self._selected_position == "": + quality_node = quality_group.node_for_global + else: + quality_node = quality_group.nodes_for_extruders.get(self._selected_position) + settings_keys = quality_group.getAllKeys() + quality_containers = [quality_node.getContainer()] + + # Here, if the user has selected a quality changes, then "quality_changes_group" will not be None, and we fetch + # the settings in that quality_changes_group. + if quality_changes_group is not None: + if self._selected_position == "": + quality_changes_node = quality_changes_group.node_for_global + else: + quality_changes_node = quality_changes_group.nodes_for_extruders.get(self._selected_position) + if quality_changes_node is not None: # it can be None if number of extruders are changed during runtime + try: + quality_containers.insert(0, quality_changes_node.getContainer()) + except: + # FIXME: This is to prevent incomplete update of QualityManager + Logger.logException("d", "Failed to get container for quality changes node %s", quality_changes_node) + return + settings_keys.update(quality_changes_group.getAllKeys()) + + # We iterate over all definitions instead of settings in a quality/qualtiy_changes group is because in the GUI, + # the settings are grouped together by categories, and we had to go over all the definitions to figure out + # which setting belongs in which category. + current_category = "" + for definition in definition_container.findDefinitions(): + if definition.type == "category": + current_category = definition.label + if self._i18n_catalog: + current_category = self._i18n_catalog.i18nc(definition.key + " label", definition.label) + continue + + profile_value = None + profile_value_source = "" + for quality_container in quality_containers: + new_value = quality_container.getProperty(definition.key, "value") + + if new_value is not None: + profile_value_source = quality_container.getMetaDataEntry("type") + profile_value = new_value + + # Global tab should use resolve (if there is one) + if self._selected_position == "": + resolve_value = global_container_stack.getProperty(definition.key, "resolve") + if resolve_value is not None and definition.key in settings_keys: + profile_value = resolve_value + + if profile_value is not None: + break + + if not self._selected_position: + user_value = global_container_stack.userChanges.getProperty(definition.key, "value") + else: + extruder_stack = global_container_stack.extruders[self._selected_position] + user_value = extruder_stack.userChanges.getProperty(definition.key, "value") + + if profile_value is None and user_value is None: + continue + + label = definition.label + if self._i18n_catalog: + label = self._i18n_catalog.i18nc(definition.key + " label", label) + + items.append({ + "key": definition.key, + "label": label, + "unit": definition.unit, + "profile_value": "" if profile_value is None else str(profile_value), # it is for display only + "profile_value_source": profile_value_source, + "user_value": "" if user_value is None else str(user_value), + "category": current_category + }) + + self.setItems(items) diff --git a/cura/Machines/Models/__init__.py b/cura/Machines/Models/__init__.py new file mode 100644 index 0000000000..e69de29bb2 diff --git a/cura/Machines/QualityChangesGroup.py b/cura/Machines/QualityChangesGroup.py new file mode 100644 index 0000000000..f8de3d2011 --- /dev/null +++ b/cura/Machines/QualityChangesGroup.py @@ -0,0 +1,53 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from UM.Application import Application + +from .QualityGroup import QualityGroup + + +class QualityChangesGroup(QualityGroup): + + def __init__(self, name: str, quality_type: str, parent = None): + super().__init__(name, quality_type, parent) + self._container_registry = Application.getInstance().getContainerRegistry() + + def addNode(self, node: "QualityNode"): + # TODO: in 3.2 and earlier, a quality_changes container may have a field called "extruder" which contains the + # extruder definition ID it belongs to. But, in fact, we only need to know the following things: + # 1. which machine a custom profile is suitable for, + # 2. if this profile is for the GlobalStack, + # 3. if this profile is for an ExtruderStack and which one (the position). + # + # So, it is preferred to have a field like this: + # extruder_position = 1 + # instead of this: + # extruder = custom_extruder_1 + # + # An upgrade needs to be done if we want to do it this way. Before that, we use the extruder's definition + # to figure out its position. + # + extruder_definition_id = node.metadata.get("extruder") + if extruder_definition_id: + metadata_list = self._container_registry.findDefinitionContainersMetadata(id = extruder_definition_id) + if not metadata_list: + raise RuntimeError("%s cannot get metadata for extruder definition [%s]" % + (self, extruder_definition_id)) + extruder_definition_metadata = metadata_list[0] + extruder_position = str(extruder_definition_metadata["position"]) + + if extruder_position in self.nodes_for_extruders: + raise RuntimeError("%s tries to overwrite the existing nodes_for_extruders position [%s] %s with %s" % + (self, extruder_position, self.node_for_global, node)) + + self.nodes_for_extruders[extruder_position] = node + + else: + # This is a quality_changes for the GlobalStack + if self.node_for_global is not None: + raise RuntimeError("%s tries to overwrite the existing node_for_global %s with %s" % + (self, self.node_for_global, node)) + self.node_for_global = node + + def __str__(self) -> str: + return "%s[<%s>, available = %s]" % (self.__class__.__name__, self.name, self.is_available) diff --git a/cura/Machines/QualityGroup.py b/cura/Machines/QualityGroup.py new file mode 100644 index 0000000000..6945162401 --- /dev/null +++ b/cura/Machines/QualityGroup.py @@ -0,0 +1,50 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from typing import Optional, List + +from PyQt5.QtCore import QObject, pyqtSlot + + +# +# A QualityGroup represents a group of containers that must be applied to each ContainerStack when it's used. +# Some concrete examples are Quality and QualityChanges: when we select quality type "normal", this quality type +# must be applied to all stacks in a machine, although each stack can have different containers. Use an Ultimaker 3 +# as an example, suppose we choose quality type "normal", the actual InstanceContainers on each stack may look +# as below: +# GlobalStack ExtruderStack 1 ExtruderStack 2 +# quality container: um3_global_normal um3_aa04_pla_normal um3_aa04_abs_normal +# +# This QualityGroup is mainly used in quality and quality_changes to group the containers that can be applied to +# a machine, so when a quality/custom quality is selected, the container can be directly applied to each stack instead +# of looking them up again. +# +class QualityGroup(QObject): + + def __init__(self, name: str, quality_type: str, parent = None): + super().__init__(parent) + self.name = name + self.node_for_global = None # type: Optional["QualityGroup"] + self.nodes_for_extruders = dict() # position str -> QualityGroup + self.quality_type = quality_type + self.is_available = False + + @pyqtSlot(result = str) + def getName(self) -> str: + return self.name + + def getAllKeys(self) -> set: + result = set() + for node in [self.node_for_global] + list(self.nodes_for_extruders.values()): + if node is None: + continue + result.update(node.getContainer().getAllKeys()) + return result + + def getAllNodes(self) -> List["QualityGroup"]: + result = [] + if self.node_for_global is not None: + result.append(self.node_for_global) + for extruder_node in self.nodes_for_extruders.values(): + result.append(extruder_node) + return result diff --git a/cura/Machines/QualityManager.py b/cura/Machines/QualityManager.py new file mode 100644 index 0000000000..a2871880f0 --- /dev/null +++ b/cura/Machines/QualityManager.py @@ -0,0 +1,491 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from typing import TYPE_CHECKING, Optional + +from PyQt5.QtCore import QObject, QTimer, pyqtSignal, pyqtSlot + +from UM.Application import Application +from UM.Logger import Logger +from UM.Util import parseBool +from UM.Settings.InstanceContainer import InstanceContainer + +from cura.Settings.ExtruderStack import ExtruderStack + +from .QualityGroup import QualityGroup +from .QualityNode import QualityNode + +if TYPE_CHECKING: + from cura.Settings.GlobalStack import GlobalStack + from .QualityChangesGroup import QualityChangesGroup + + +# +# Similar to MaterialManager, QualityManager maintains a number of maps and trees for quality profile lookup. +# The models GUI and QML use are now only dependent on the QualityManager. That means as long as the data in +# QualityManager gets updated correctly, the GUI models should be updated correctly too, and the same goes for GUI. +# +# For now, updating the lookup maps and trees here is very simple: we discard the old data completely and recreate them +# again. This means the update is exactly the same as initialization. There are performance concerns about this approach +# but so far the creation of the tables and maps is very fast and there is no noticeable slowness, we keep it like this +# because it's simple. +# +class QualityManager(QObject): + + qualitiesUpdated = pyqtSignal() + + def __init__(self, container_registry, parent = None): + super().__init__(parent) + self._application = Application.getInstance() + self._material_manager = self._application.getMaterialManager() + self._container_registry = container_registry + + self._empty_quality_container = self._application.empty_quality_container + self._empty_quality_changes_container = self._application.empty_quality_changes_container + + self._machine_variant_material_quality_type_to_quality_dict = {} # for quality lookup + self._machine_quality_type_to_quality_changes_dict = {} # for quality_changes lookup + + self._default_machine_definition_id = "fdmprinter" + + self._container_registry.containerMetaDataChanged.connect(self._onContainerMetadataChanged) + self._container_registry.containerAdded.connect(self._onContainerMetadataChanged) + self._container_registry.containerRemoved.connect(self._onContainerMetadataChanged) + + # When a custom quality gets added/imported, there can be more than one InstanceContainers. In those cases, + # we don't want to react on every container/metadata changed signal. The timer here is to buffer it a bit so + # we don't react too many time. + self._update_timer = QTimer(self) + self._update_timer.setInterval(300) + self._update_timer.setSingleShot(True) + self._update_timer.timeout.connect(self._updateMaps) + + def initialize(self): + # Initialize the lookup tree for quality profiles with following structure: + # -> -> + # -> + + self._machine_variant_material_quality_type_to_quality_dict = {} # for quality lookup + self._machine_quality_type_to_quality_changes_dict = {} # for quality_changes lookup + + quality_metadata_list = self._container_registry.findContainersMetadata(type = "quality") + for metadata in quality_metadata_list: + if metadata["id"] == "empty_quality": + continue + + definition_id = metadata["definition"] + quality_type = metadata["quality_type"] + + root_material_id = metadata.get("material") + variant_name = metadata.get("variant") + is_global_quality = metadata.get("global_quality", False) + is_global_quality = is_global_quality or (root_material_id is None and variant_name is None) + + # Sanity check: material+variant and is_global_quality cannot be present at the same time + if is_global_quality and (root_material_id or variant_name): + raise RuntimeError("Quality profile [%s] contains invalid data: it is a global quality but contains 'material' and 'nozzle' info." % metadata["id"]) + + if definition_id not in self._machine_variant_material_quality_type_to_quality_dict: + self._machine_variant_material_quality_type_to_quality_dict[definition_id] = QualityNode() + machine_node = self._machine_variant_material_quality_type_to_quality_dict[definition_id] + + if is_global_quality: + # For global qualities, save data in the machine node + machine_node.addQualityMetadata(quality_type, metadata) + continue + + if variant_name is not None: + # If variant_name is specified in the quality/quality_changes profile, check if material is specified, + # too. + if variant_name not in machine_node.children_map: + machine_node.children_map[variant_name] = QualityNode() + variant_node = machine_node.children_map[variant_name] + + if root_material_id is None: + # If only variant_name is specified but material is not, add the quality/quality_changes metadata + # into the current variant node. + variant_node.addQualityMetadata(quality_type, metadata) + else: + # If only variant_name and material are both specified, go one level deeper: create a material node + # under the current variant node, and then add the quality/quality_changes metadata into the + # material node. + if root_material_id not in variant_node.children_map: + variant_node.children_map[root_material_id] = QualityNode() + material_node = variant_node.children_map[root_material_id] + + material_node.addQualityMetadata(quality_type, metadata) + + else: + # If variant_name is not specified, check if material is specified. + if root_material_id is not None: + if root_material_id not in machine_node.children_map: + machine_node.children_map[root_material_id] = QualityNode() + material_node = machine_node.children_map[root_material_id] + + material_node.addQualityMetadata(quality_type, metadata) + + # Initialize the lookup tree for quality_changes profiles with following structure: + # -> -> + quality_changes_metadata_list = self._container_registry.findContainersMetadata(type = "quality_changes") + for metadata in quality_changes_metadata_list: + if metadata["id"] == "empty_quality_changes": + continue + + machine_definition_id = metadata["definition"] + quality_type = metadata["quality_type"] + + if machine_definition_id not in self._machine_quality_type_to_quality_changes_dict: + self._machine_quality_type_to_quality_changes_dict[machine_definition_id] = QualityNode() + machine_node = self._machine_quality_type_to_quality_changes_dict[machine_definition_id] + machine_node.addQualityChangesMetadata(quality_type, metadata) + + Logger.log("d", "Lookup tables updated.") + self.qualitiesUpdated.emit() + + def _updateMaps(self): + self.initialize() + + def _onContainerMetadataChanged(self, container): + self._onContainerChanged(container) + + def _onContainerChanged(self, container): + container_type = container.getMetaDataEntry("type") + if container_type not in ("quality", "quality_changes"): + return + + # update the cache table + self._update_timer.start() + + # Updates the given quality groups' availabilities according to which extruders are being used/ enabled. + def _updateQualityGroupsAvailability(self, machine: "GlobalStack", quality_group_list): + used_extruders = set() + # TODO: This will change after the Machine refactoring + for i in range(machine.getProperty("machine_extruder_count", "value")): + used_extruders.add(str(i)) + + # Update the "is_available" flag for each quality group. + for quality_group in quality_group_list: + is_available = True + if quality_group.node_for_global is None: + is_available = False + if is_available: + for position in used_extruders: + if position not in quality_group.nodes_for_extruders: + is_available = False + break + + quality_group.is_available = is_available + + # Returns a dict of "custom profile name" -> QualityChangesGroup + def getQualityChangesGroups(self, machine: "GlobalStack") -> dict: + machine_definition_id = getMachineDefinitionIDForQualitySearch(machine) + + machine_node = self._machine_quality_type_to_quality_changes_dict.get(machine_definition_id) + if not machine_node: + Logger.log("i", "Cannot find node for machine def [%s] in QualityChanges lookup table", machine_definition_id) + return dict() + + # Update availability for each QualityChangesGroup: + # A custom profile is always available as long as the quality_type it's based on is available + quality_group_dict = self.getQualityGroups(machine) + available_quality_type_list = [qt for qt, qg in quality_group_dict.items() if qg.is_available] + + # Iterate over all quality_types in the machine node + quality_changes_group_dict = dict() + for quality_type, quality_changes_node in machine_node.quality_type_map.items(): + for quality_changes_name, quality_changes_group in quality_changes_node.children_map.items(): + quality_changes_group_dict[quality_changes_name] = quality_changes_group + quality_changes_group.is_available = quality_type in available_quality_type_list + + return quality_changes_group_dict + + # + # Gets all quality groups for the given machine. Both available and none available ones will be included. + # It returns a dictionary with "quality_type"s as keys and "QualityGroup"s as values. + # Whether a QualityGroup is available can be unknown via the field QualityGroup.is_available. + # For more details, see QualityGroup. + # + def getQualityGroups(self, machine: "GlobalStack") -> dict: + machine_definition_id = getMachineDefinitionIDForQualitySearch(machine) + + # This determines if we should only get the global qualities for the global stack and skip the global qualities for the extruder stacks + has_variant_materials = parseBool(machine.getMetaDataEntry("has_variant_materials", False)) + + # To find the quality container for the GlobalStack, check in the following fall-back manner: + # (1) the machine-specific node + # (2) the generic node + machine_node = self._machine_variant_material_quality_type_to_quality_dict.get(machine_definition_id) + default_machine_node = self._machine_variant_material_quality_type_to_quality_dict.get(self._default_machine_definition_id) + nodes_to_check = [machine_node, default_machine_node] + + # Iterate over all quality_types in the machine node + quality_group_dict = {} + for node in nodes_to_check: + if node and node.quality_type_map: + # Only include global qualities + if has_variant_materials: + quality_node = list(node.quality_type_map.values())[0] + is_global_quality = parseBool(quality_node.metadata.get("global_quality", False)) + if not is_global_quality: + continue + + for quality_type, quality_node in node.quality_type_map.items(): + quality_group = QualityGroup(quality_node.metadata["name"], quality_type) + quality_group.node_for_global = quality_node + quality_group_dict[quality_type] = quality_group + break + + # Iterate over all extruders to find quality containers for each extruder + for position, extruder in machine.extruders.items(): + variant_name = None + if extruder.variant.getId() != "empty_variant": + variant_name = extruder.variant.getName() + + # This is a list of root material IDs to use for searching for suitable quality profiles. + # The root material IDs in this list are in prioritized order. + root_material_id_list = [] + has_material = False # flag indicating whether this extruder has a material assigned + if extruder.material.getId() != "empty_material": + has_material = True + root_material_id = extruder.material.getMetaDataEntry("base_file") + # Convert possible generic_pla_175 -> generic_pla + root_material_id = self._material_manager.getRootMaterialIDWithoutDiameter(root_material_id) + root_material_id_list.append(root_material_id) + + # Also try to get the fallback material + material_type = extruder.material.getMetaDataEntry("material") + fallback_root_material_id = self._material_manager.getFallbackMaterialIdByMaterialType(material_type) + if fallback_root_material_id: + root_material_id_list.append(fallback_root_material_id) + + # Here we construct a list of nodes we want to look for qualities with the highest priority first. + # The use case is that, when we look for qualities for a machine, we first want to search in the following + # order: + # 1. machine-variant-and-material-specific qualities if exist + # 2. machine-variant-specific qualities if exist + # 3. machine-material-specific qualities if exist + # 4. machine-specific qualities if exist + # 5. generic qualities if exist + # Each points above can be represented as a node in the lookup tree, so here we simply put those nodes into + # the list with priorities as the order. Later, we just need to loop over each node in this list and fetch + # qualities from there. + nodes_to_check = [] + + if variant_name: + # In this case, we have both a specific variant and a specific material + variant_node = machine_node.getChildNode(variant_name) + if variant_node and has_material: + for root_material_id in root_material_id_list: + material_node = variant_node.getChildNode(root_material_id) + if material_node: + nodes_to_check.append(material_node) + break + nodes_to_check.append(variant_node) + + # In this case, we only have a specific material but NOT a variant + if has_material: + for root_material_id in root_material_id_list: + material_node = machine_node.getChildNode(root_material_id) + if material_node: + nodes_to_check.append(material_node) + break + + nodes_to_check += [machine_node, default_machine_node] + for node in nodes_to_check: + if node and node.quality_type_map: + if has_variant_materials: + # Only include variant qualities; skip non global qualities + quality_node = list(node.quality_type_map.values())[0] + is_global_quality = parseBool(quality_node.metadata.get("global_quality", False)) + if is_global_quality: + continue + + for quality_type, quality_node in node.quality_type_map.items(): + if quality_type not in quality_group_dict: + quality_group = QualityGroup(quality_node.metadata["name"], quality_type) + quality_group_dict[quality_type] = quality_group + + quality_group = quality_group_dict[quality_type] + quality_group.nodes_for_extruders[position] = quality_node + break + + # Update availabilities for each quality group + self._updateQualityGroupsAvailability(machine, quality_group_dict.values()) + + return quality_group_dict + + def getQualityGroupsForMachineDefinition(self, machine: "GlobalStack") -> dict: + machine_definition_id = getMachineDefinitionIDForQualitySearch(machine) + + # To find the quality container for the GlobalStack, check in the following fall-back manner: + # (1) the machine-specific node + # (2) the generic node + machine_node = self._machine_variant_material_quality_type_to_quality_dict.get(machine_definition_id) + default_machine_node = self._machine_variant_material_quality_type_to_quality_dict.get( + self._default_machine_definition_id) + nodes_to_check = [machine_node, default_machine_node] + + # Iterate over all quality_types in the machine node + quality_group_dict = dict() + for node in nodes_to_check: + if node and node.quality_type_map: + for quality_type, quality_node in node.quality_type_map.items(): + quality_group = QualityGroup(quality_node.metadata["name"], quality_type) + quality_group.node_for_global = quality_node + quality_group_dict[quality_type] = quality_group + break + + return quality_group_dict + + # + # Methods for GUI + # + + # + # Remove the given quality changes group. + # + @pyqtSlot(QObject) + def removeQualityChangesGroup(self, quality_changes_group: "QualityChangesGroup"): + Logger.log("i", "Removing quality changes group [%s]", quality_changes_group.name) + for node in quality_changes_group.getAllNodes(): + self._container_registry.removeContainer(node.metadata["id"]) + + # + # Rename a set of quality changes containers. Returns the new name. + # + @pyqtSlot(QObject, str, result = str) + def renameQualityChangesGroup(self, quality_changes_group: "QualityChangesGroup", new_name: str) -> str: + Logger.log("i", "Renaming QualityChangesGroup[%s] to [%s]", quality_changes_group.name, new_name) + if new_name == quality_changes_group.name: + Logger.log("i", "QualityChangesGroup name [%s] unchanged.", quality_changes_group.name) + return new_name + + new_name = self._container_registry.uniqueName(new_name) + for node in quality_changes_group.getAllNodes(): + node.getContainer().setName(new_name) + + quality_changes_group.name = new_name + + self._application.getMachineManager().activeQualityChanged.emit() + self._application.getMachineManager().activeQualityGroupChanged.emit() + + return new_name + + # + # Duplicates the given quality. + # + @pyqtSlot(str, "QVariantMap") + def duplicateQualityChanges(self, quality_changes_name, quality_model_item): + global_stack = self._application.getGlobalContainerStack() + if not global_stack: + Logger.log("i", "No active global stack, cannot duplicate quality changes.") + return + + quality_group = quality_model_item["quality_group"] + quality_changes_group = quality_model_item["quality_changes_group"] + if quality_changes_group is None: + # create global quality changes only + new_quality_changes = self._createQualityChanges(quality_group.quality_type, quality_changes_name, + global_stack, extruder_id = None) + self._container_registry.addContainer(new_quality_changes) + else: + new_name = self._container_registry.uniqueName(quality_changes_name) + for node in quality_changes_group.getAllNodes(): + container = node.getContainer() + new_id = self._container_registry.uniqueName(container.getId()) + self._container_registry.addContainer(container.duplicate(new_id, new_name)) + + ## Create quality changes containers from the user containers in the active stacks. + # + # This will go through the global and extruder stacks and create quality_changes containers from + # the user containers in each stack. These then replace the quality_changes containers in the + # stack and clear the user settings. + @pyqtSlot(str) + def createQualityChanges(self, base_name): + machine_manager = Application.getInstance().getMachineManager() + + global_stack = machine_manager.activeMachine + if not global_stack: + return + + active_quality_name = machine_manager.activeQualityOrQualityChangesName + if active_quality_name == "": + Logger.log("w", "No quality container found in stack %s, cannot create profile", global_stack.getId()) + return + + machine_manager.blurSettings.emit() + if base_name is None or base_name == "": + base_name = active_quality_name + unique_name = self._container_registry.uniqueName(base_name) + + # Go through the active stacks and create quality_changes containers from the user containers. + stack_list = [global_stack] + list(global_stack.extruders.values()) + for stack in stack_list: + user_container = stack.userChanges + quality_container = stack.quality + quality_changes_container = stack.qualityChanges + if not quality_container or not quality_changes_container: + Logger.log("w", "No quality or quality changes container found in stack %s, ignoring it", stack.getId()) + continue + + extruder_definition_id = None + if isinstance(stack, ExtruderStack): + extruder_definition_id = stack.definition.getId() + quality_type = quality_container.getMetaDataEntry("quality_type") + new_changes = self._createQualityChanges(quality_type, unique_name, global_stack, extruder_definition_id) + from cura.Settings.ContainerManager import ContainerManager + ContainerManager.getInstance()._performMerge(new_changes, quality_changes_container, clear_settings = False) + ContainerManager.getInstance()._performMerge(new_changes, user_container) + + self._container_registry.addContainer(new_changes) + + # + # Create a quality changes container with the given setup. + # + def _createQualityChanges(self, quality_type: str, new_name: str, machine: "GlobalStack", + extruder_id: Optional[str]) -> "InstanceContainer": + base_id = machine.definition.getId() if extruder_id is None else extruder_id + new_id = base_id + "_" + new_name + new_id = new_id.lower().replace(" ", "_") + new_id = self._container_registry.uniqueName(new_id) + + # Create a new quality_changes container for the quality. + quality_changes = InstanceContainer(new_id) + quality_changes.setName(new_name) + quality_changes.addMetaDataEntry("type", "quality_changes") + quality_changes.addMetaDataEntry("quality_type", quality_type) + + # If we are creating a container for an extruder, ensure we add that to the container + if extruder_id is not None: + quality_changes.addMetaDataEntry("extruder", extruder_id) + + # If the machine specifies qualities should be filtered, ensure we match the current criteria. + machine_definition_id = getMachineDefinitionIDForQualitySearch(machine) + quality_changes.setDefinition(machine_definition_id) + + quality_changes.addMetaDataEntry("setting_version", self._application.SettingVersion) + return quality_changes + + +# +# Gets the machine definition ID that can be used to search for Quality containers that are suitable for the given +# machine. The rule is as follows: +# 1. By default, the machine definition ID for quality container search will be "fdmprinter", which is the generic +# machine. +# 2. If a machine has its own machine quality (with "has_machine_quality = True"), we should use the given machine's +# own machine definition ID for quality search. +# Example: for an Ultimaker 3, the definition ID should be "ultimaker3". +# 3. When condition (2) is met, AND the machine has "quality_definition" defined in its definition file, then the +# definition ID specified in "quality_definition" should be used. +# Example: for an Ultimaker 3 Extended, it has "quality_definition = ultimaker3". This means Ultimaker 3 Extended +# shares the same set of qualities profiles as Ultimaker 3. +# +def getMachineDefinitionIDForQualitySearch(machine: "GlobalStack", default_definition_id: str = "fdmprinter") -> str: + machine_definition_id = default_definition_id + if parseBool(machine.getMetaDataEntry("has_machine_quality", False)): + # Only use the machine's own quality definition ID if this machine has machine quality. + machine_definition_id = machine.getMetaDataEntry("quality_definition") + if machine_definition_id is None: + machine_definition_id = machine.definition.getId() + + return machine_definition_id diff --git a/cura/Machines/QualityNode.py b/cura/Machines/QualityNode.py new file mode 100644 index 0000000000..a30e219da3 --- /dev/null +++ b/cura/Machines/QualityNode.py @@ -0,0 +1,35 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from typing import Optional + +from .ContainerNode import ContainerNode +from .QualityChangesGroup import QualityChangesGroup + + +# +# QualityNode is used for BOTH quality and quality_changes containers. +# +class QualityNode(ContainerNode): + + def __init__(self, metadata: Optional[dict] = None): + super().__init__(metadata = metadata) + self.quality_type_map = {} # quality_type -> QualityNode for InstanceContainer + + def addQualityMetadata(self, quality_type: str, metadata: dict): + if quality_type not in self.quality_type_map: + self.quality_type_map[quality_type] = QualityNode(metadata) + + def getQualityNode(self, quality_type: str) -> Optional["QualityNode"]: + return self.quality_type_map.get(quality_type) + + def addQualityChangesMetadata(self, quality_type: str, metadata: dict): + if quality_type not in self.quality_type_map: + self.quality_type_map[quality_type] = QualityNode() + quality_type_node = self.quality_type_map[quality_type] + + name = metadata["name"] + if name not in quality_type_node.children_map: + quality_type_node.children_map[name] = QualityChangesGroup(name, quality_type) + quality_changes_group = quality_type_node.children_map[name] + quality_changes_group.addNode(QualityNode(metadata)) diff --git a/cura/Machines/VariantManager.py b/cura/Machines/VariantManager.py new file mode 100644 index 0000000000..6cb0a3d7b2 --- /dev/null +++ b/cura/Machines/VariantManager.py @@ -0,0 +1,111 @@ +# Copyright (c) 2018 Ultimaker B.V. +# Cura is released under the terms of the LGPLv3 or higher. + +from enum import Enum +from collections import OrderedDict +from typing import Optional, TYPE_CHECKING + +from UM.Logger import Logger +from UM.Settings.ContainerRegistry import ContainerRegistry +from UM.Util import parseBool + +from cura.Machines.ContainerNode import ContainerNode +from cura.Settings.GlobalStack import GlobalStack + +if TYPE_CHECKING: + from UM.Settings.DefinitionContainer import DefinitionContainer + + +class VariantType(Enum): + BUILD_PLATE = "buildplate" + NOZZLE = "nozzle" + + +ALL_VARIANT_TYPES = (VariantType.BUILD_PLATE, VariantType.NOZZLE) + + +# +# VariantManager is THE place to look for a specific variant. It maintains a variant lookup table with the following +# structure: +# +# [machine_definition_id] -> [variant_type] -> [variant_name] -> ContainerNode(metadata / container) +# Example: "ultimaker3" -> "buildplate" -> "Glass" (if present) -> ContainerNode +# -> ... +# -> "nozzle" -> "AA 0.4" +# -> "BB 0.8" +# -> ... +# +# Note that the "container" field is not loaded in the beginning because it would defeat the purpose of lazy-loading. +# A container is loaded when getVariant() is called to load a variant InstanceContainer. +# +class VariantManager: + + def __init__(self, container_registry): + self._container_registry = container_registry # type: ContainerRegistry + + self._machine_to_variant_dict_map = dict() # -> + + self._exclude_variant_id_list = ["empty_variant"] + + # + # Initializes the VariantManager including: + # - initializing the variant lookup table based on the metadata in ContainerRegistry. + # + def initialize(self): + self._machine_to_variant_dict_map = OrderedDict() + + # Cache all variants from the container registry to a variant map for better searching and organization. + variant_metadata_list = self._container_registry.findContainersMetadata(type = "variant") + for variant_metadata in variant_metadata_list: + if variant_metadata["id"] in self._exclude_variant_id_list: + Logger.log("d", "Exclude variant [%s]", variant_metadata["id"]) + continue + + variant_name = variant_metadata["name"] + variant_definition = variant_metadata["definition"] + if variant_definition not in self._machine_to_variant_dict_map: + self._machine_to_variant_dict_map[variant_definition] = OrderedDict() + for variant_type in ALL_VARIANT_TYPES: + self._machine_to_variant_dict_map[variant_definition][variant_type] = dict() + + variant_type = variant_metadata["hardware_type"] + variant_type = VariantType(variant_type) + variant_dict = self._machine_to_variant_dict_map[variant_definition][variant_type] + if variant_name in variant_dict: + # ERROR: duplicated variant name. + raise RuntimeError("Found duplicated variant name [%s], type [%s] for machine [%s]" % + (variant_name, variant_type, variant_definition)) + + variant_dict[variant_name] = ContainerNode(metadata = variant_metadata) + + # + # Gets the variant InstanceContainer with the given information. + # Almost the same as getVariantMetadata() except that this returns an InstanceContainer if present. + # + def getVariantNode(self, machine_definition_id: str, variant_name: str, + variant_type: Optional["VariantType"] = VariantType.NOZZLE) -> Optional["ContainerNode"]: + return self._machine_to_variant_dict_map[machine_definition_id].get(variant_type, {}).get(variant_name) + + def getVariantNodes(self, machine: "GlobalStack", + variant_type: Optional["VariantType"] = VariantType.NOZZLE) -> dict: + machine_definition_id = machine.definition.getId() + return self._machine_to_variant_dict_map.get(machine_definition_id, {}).get(variant_type, {}) + + # + # Gets the default variant for the given machine definition. + # + def getDefaultVariantNode(self, machine_definition: "DefinitionContainer", + variant_type: VariantType) -> Optional["ContainerNode"]: + machine_definition_id = machine_definition.getId() + preferred_variant_name = None + if variant_type == VariantType.BUILD_PLATE: + if parseBool(machine_definition.getMetaDataEntry("has_variant_buildplates", False)): + preferred_variant_name = machine_definition.getMetaDataEntry("preferred_variant_buildplate_name") + else: + if parseBool(machine_definition.getMetaDataEntry("has_variants", False)): + preferred_variant_name = machine_definition.getMetaDataEntry("preferred_variant_name") + + node = None + if preferred_variant_name: + node = self.getVariantNode(machine_definition_id, preferred_variant_name, variant_type) + return node diff --git a/cura/Machines/__init__.py b/cura/Machines/__init__.py new file mode 100644 index 0000000000..e69de29bb2 diff --git a/cura/ObjectsModel.py b/cura/ObjectsModel.py index f02e8b4db5..d7077d3d85 100644 --- a/cura/ObjectsModel.py +++ b/cura/ObjectsModel.py @@ -19,6 +19,8 @@ class ObjectsModel(ListModel): self._build_plate_number = -1 + self._stacks_have_errors = None # type:Optional[bool] + def setActiveBuildPlate(self, nr): self._build_plate_number = nr self._update() @@ -67,3 +69,11 @@ class ObjectsModel(ListModel): @staticmethod def createObjectsModel(): return ObjectsModel() + + ## Check if none of the model's stacks contain error states + # The setting applied for the settings per model + def stacksHaveErrors(self) -> bool: + return bool(self._stacks_have_errors) + + def setStacksHaveErrors(self, value): + self._stacks_have_errors = value \ No newline at end of file diff --git a/cura/PrintInformation.py b/cura/PrintInformation.py index 8b6fbb1f28..05b740637d 100644 --- a/cura/PrintInformation.py +++ b/cura/PrintInformation.py @@ -1,27 +1,22 @@ # Copyright (c) 2018 Ultimaker B.V. # Cura is released under the terms of the LGPLv3 or higher. -from PyQt5.QtCore import QObject, pyqtSignal, pyqtProperty -from UM.FlameProfiler import pyqtSlot +from typing import Dict +import math +import os.path +import unicodedata +import json +import re # To create abbreviations for printer names. + +from PyQt5.QtCore import QObject, pyqtSignal, pyqtProperty, pyqtSlot from UM.Application import Application from UM.Logger import Logger from UM.Qt.Duration import Duration from UM.Preferences import Preferences from UM.Scene.SceneNode import SceneNode -from UM.Settings.ContainerRegistry import ContainerRegistry -from cura.Scene.CuraSceneNode import CuraSceneNode - -from cura.Settings.ExtruderManager import ExtruderManager -from typing import Dict - -import math -import os.path -import unicodedata -import json -import re #To create abbreviations for printer names. - from UM.i18n import i18nCatalog + catalog = i18nCatalog("cura") ## A class for processing and calculating minimum, current and maximum print time as well as managing the job name @@ -76,16 +71,19 @@ class PrintInformation(QObject): self._active_build_plate = 0 self._initVariablesWithBuildPlate(self._active_build_plate) - Application.getInstance().globalContainerStackChanged.connect(self._updateJobName) - Application.getInstance().fileLoaded.connect(self.setBaseName) - Application.getInstance().getBuildPlateModel().activeBuildPlateChanged.connect(self._onActiveBuildPlateChanged) - Application.getInstance().workspaceLoaded.connect(self.setProjectName) + self._application = Application.getInstance() + self._multi_build_plate_model = self._application.getMultiBuildPlateModel() + + self._application.globalContainerStackChanged.connect(self._updateJobName) + self._application.globalContainerStackChanged.connect(self.setToZeroPrintInformation) + self._application.fileLoaded.connect(self.setBaseName) + self._application.workspaceLoaded.connect(self.setProjectName) + self._multi_build_plate_model.activeBuildPlateChanged.connect(self._onActiveBuildPlateChanged) Preferences.getInstance().preferenceChanged.connect(self._onPreferencesChanged) - self._active_material_container = None - Application.getInstance().getMachineManager().activeMaterialChanged.connect(self._onActiveMaterialChanged) - self._onActiveMaterialChanged() + self._application.getMachineManager().rootMaterialChanged.connect(self._onActiveMaterialsChanged) + self._onActiveMaterialsChanged() self._material_amounts = [] @@ -200,11 +198,10 @@ class PrintInformation(QObject): self._current_print_time[build_plate_number].setDuration(total_estimated_time) def _calculateInformation(self, build_plate_number): - if Application.getInstance().getGlobalContainerStack() is None: + global_stack = Application.getInstance().getGlobalContainerStack() + if global_stack is None: return - # Material amount is sent as an amount of mm^3, so calculate length from that - radius = Application.getInstance().getGlobalContainerStack().getProperty("material_diameter", "value") / 2 self._material_lengths[build_plate_number] = [] self._material_weights[build_plate_number] = [] self._material_costs[build_plate_number] = [] @@ -212,18 +209,17 @@ class PrintInformation(QObject): material_preference_values = json.loads(Preferences.getInstance().getValue("cura/material_settings")) - extruder_stacks = list(ExtruderManager.getInstance().getMachineExtruders(Application.getInstance().getGlobalContainerStack().getId())) - for index, amount in enumerate(self._material_amounts): + extruder_stacks = global_stack.extruders + for position, extruder_stack in extruder_stacks.items(): + index = int(position) + if index >= len(self._material_amounts): + continue + amount = self._material_amounts[index] ## Find the right extruder stack. As the list isn't sorted because it's a annoying generator, we do some # list comprehension filtering to solve this for us. - material = None - if extruder_stacks: # Multi extrusion machine - extruder_stack = [extruder for extruder in extruder_stacks if extruder.getMetaDataEntry("position") == str(index)][0] - density = extruder_stack.getMetaDataEntry("properties", {}).get("density", 0) - material = extruder_stack.findContainer({"type": "material"}) - else: # Machine with no extruder stacks - density = Application.getInstance().getGlobalContainerStack().getMetaDataEntry("properties", {}).get("density", 0) - material = Application.getInstance().getGlobalContainerStack().findContainer({"type": "material"}) + density = extruder_stack.getMetaDataEntry("properties", {}).get("density", 0) + material = extruder_stack.findContainer({"type": "material"}) + radius = extruder_stack.getProperty("material_diameter", "value") / 2 weight = float(amount) * float(density) / 1000 cost = 0 @@ -242,6 +238,7 @@ class PrintInformation(QObject): else: cost = 0 + # Material amount is sent as an amount of mm^3, so calculate length from that if radius != 0: length = round((amount / (math.pi * radius ** 2)) / 1000, 2) else: @@ -260,25 +257,11 @@ class PrintInformation(QObject): if preference != "cura/material_settings": return - for build_plate_number in range(Application.getInstance().getBuildPlateModel().maxBuildPlate + 1): + for build_plate_number in range(self._multi_build_plate_model.maxBuildPlate + 1): self._calculateInformation(build_plate_number) - def _onActiveMaterialChanged(self): - if self._active_material_container: - try: - self._active_material_container.metaDataChanged.disconnect(self._onMaterialMetaDataChanged) - except TypeError: #pyQtSignal gives a TypeError when disconnecting from something that is already disconnected. - pass - - active_material_id = Application.getInstance().getMachineManager().activeMaterialId - active_material_containers = ContainerRegistry.getInstance().findInstanceContainers(id = active_material_id) - - if active_material_containers: - self._active_material_container = active_material_containers[0] - self._active_material_container.metaDataChanged.connect(self._onMaterialMetaDataChanged) - def _onActiveBuildPlateChanged(self): - new_active_build_plate = Application.getInstance().getBuildPlateModel().activeBuildPlate + new_active_build_plate = self._multi_build_plate_model.activeBuildPlate if new_active_build_plate != self._active_build_plate: self._active_build_plate = new_active_build_plate @@ -290,8 +273,8 @@ class PrintInformation(QObject): self.materialNamesChanged.emit() self.currentPrintTimeChanged.emit() - def _onMaterialMetaDataChanged(self, *args, **kwargs): - for build_plate_number in range(Application.getInstance().getBuildPlateModel().maxBuildPlate + 1): + def _onActiveMaterialsChanged(self, *args, **kwargs): + for build_plate_number in range(self._multi_build_plate_model.maxBuildPlate + 1): self._calculateInformation(build_plate_number) @pyqtSlot(str) @@ -396,7 +379,9 @@ class PrintInformation(QObject): return result # Simulate message with zero time duration - def setToZeroPrintInformation(self, build_plate): + def setToZeroPrintInformation(self, build_plate = None): + if build_plate is None: + build_plate = self._active_build_plate # Construct the 0-time message temp_message = {} diff --git a/cura/PrinterOutput/NetworkedPrinterOutputDevice.py b/cura/PrinterOutput/NetworkedPrinterOutputDevice.py index a7b7edc636..315b195e2a 100644 --- a/cura/PrinterOutput/NetworkedPrinterOutputDevice.py +++ b/cura/PrinterOutput/NetworkedPrinterOutputDevice.py @@ -219,6 +219,9 @@ class NetworkedPrinterOutputDevice(PrinterOutputDevice): reply.uploadProgress.connect(onProgress) self._registerOnFinishedCallback(reply, onFinished) + + return reply + def postForm(self, target: str, header_data: str, body_data: bytes, onFinished: Optional[Callable[[Any, QNetworkReply], None]], onProgress: Callable = None) -> None: post_part = QHttpPart() post_part.setHeader(QNetworkRequest.ContentDispositionHeader, header_data) diff --git a/cura/PrinterOutput/PrinterOutputModel.py b/cura/PrinterOutput/PrinterOutputModel.py index 9d0c9a81b5..19365b9cc6 100644 --- a/cura/PrinterOutput/PrinterOutputModel.py +++ b/cura/PrinterOutput/PrinterOutputModel.py @@ -108,32 +108,32 @@ class PrinterOutputModel(QObject): self._head_position = Vector(x, y, z) self.headPositionChanged.emit() - @pyqtProperty("long", "long", "long") - @pyqtProperty("long", "long", "long", "long") + @pyqtProperty(float, float, float) + @pyqtProperty(float, float, float, float) def setHeadPosition(self, x, y, z, speed = 3000): self.updateHeadPosition(x, y, z) self._controller.setHeadPosition(self, x, y, z, speed) - @pyqtProperty("long") - @pyqtProperty("long", "long") + @pyqtProperty(float) + @pyqtProperty(float, float) def setHeadX(self, x, speed = 3000): self.updateHeadPosition(x, self._head_position.y, self._head_position.z) self._controller.setHeadPosition(self, x, self._head_position.y, self._head_position.z, speed) - @pyqtProperty("long") - @pyqtProperty("long", "long") + @pyqtProperty(float) + @pyqtProperty(float, float) def setHeadY(self, y, speed = 3000): self.updateHeadPosition(self._head_position.x, y, self._head_position.z) self._controller.setHeadPosition(self, self._head_position.x, y, self._head_position.z, speed) - @pyqtProperty("long") - @pyqtProperty("long", "long") + @pyqtProperty(float) + @pyqtProperty(float, float) def setHeadZ(self, z, speed = 3000): self.updateHeadPosition(self._head_position.x, self._head_position.y, z) self._controller.setHeadPosition(self, self._head_position.x, self._head_position.y, z, speed) - @pyqtSlot("long", "long", "long") - @pyqtSlot("long", "long", "long", "long") + @pyqtSlot(float, float, float) + @pyqtSlot(float, float, float, float) def moveHead(self, x = 0, y = 0, z = 0, speed = 3000): self._controller.moveHead(self, x, y, z, speed) diff --git a/cura/QualityManager.py b/cura/QualityManager.py deleted file mode 100644 index 76a0c86a5f..0000000000 --- a/cura/QualityManager.py +++ /dev/null @@ -1,332 +0,0 @@ -# Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the LGPLv3 or higher. - -# This collects a lot of quality and quality changes related code which was split between ContainerManager -# and the MachineManager and really needs to usable from both. -from typing import Any, Dict, List, Optional, TYPE_CHECKING - -from UM.Application import Application -from UM.Settings.ContainerRegistry import ContainerRegistry -from UM.Settings.InstanceContainer import InstanceContainer -from cura.Settings.ExtruderManager import ExtruderManager - -if TYPE_CHECKING: - from cura.Settings.GlobalStack import GlobalStack - from cura.Settings.ExtruderStack import ExtruderStack - from UM.Settings.DefinitionContainer import DefinitionContainerInterface - -class QualityManager: - - ## Get the singleton instance for this class. - @classmethod - def getInstance(cls) -> "QualityManager": - # Note: Explicit use of class name to prevent issues with inheritance. - if not QualityManager.__instance: - QualityManager.__instance = cls() - return QualityManager.__instance - - __instance = None # type: "QualityManager" - - ## Find a quality by name for a specific machine definition and materials. - # - # \param quality_name - # \param machine_definition (Optional) \type{DefinitionContainerInterface} If nothing is - # specified then the currently selected machine definition is used. - # \param material_containers_metadata If nothing is specified then the - # current set of selected materials is used. - # \return the matching quality container \type{InstanceContainer} - def findQualityByName(self, quality_name: str, machine_definition: Optional["DefinitionContainerInterface"] = None, material_containers_metadata: Optional[List[Dict[str, Any]]] = None) -> Optional[InstanceContainer]: - criteria = {"type": "quality", "name": quality_name} - result = self._getFilteredContainersForStack(machine_definition, material_containers_metadata, **criteria) - - # Fall back to using generic materials and qualities if nothing could be found. - if not result and material_containers_metadata and len(material_containers_metadata) == 1: - basic_materials = self._getBasicMaterialMetadatas(material_containers_metadata[0]) - result = self._getFilteredContainersForStack(machine_definition, basic_materials, **criteria) - - return result[0] if result else None - - ## Find a quality changes container by name. - # - # \param quality_changes_name \type{str} the name of the quality changes container. - # \param machine_definition (Optional) \type{DefinitionContainer} If nothing is - # specified then the currently selected machine definition is used.. - # \return the matching quality changes containers \type{List[InstanceContainer]} - def findQualityChangesByName(self, quality_changes_name: str, machine_definition: Optional["DefinitionContainerInterface"] = None): - if not machine_definition: - global_stack = Application.getGlobalContainerStack() - if not global_stack: - return [] #No stack, so no current definition could be found, so there are no quality changes either. - machine_definition = global_stack.definition - - result = self.findAllQualityChangesForMachine(machine_definition) - result = [quality_change for quality_change in result if quality_change.getName() == quality_changes_name] - return result - - ## Fetch the list of available quality types for this combination of machine definition and materials. - # - # \param machine_definition \type{DefinitionContainer} - # \param material_containers \type{List[InstanceContainer]} - # \return \type{List[str]} - def findAllQualityTypesForMachineAndMaterials(self, machine_definition: "DefinitionContainerInterface", material_containers: List[InstanceContainer]) -> List[str]: - # Determine the common set of quality types which can be - # applied to all of the materials for this machine. - quality_type_dict = self.__fetchQualityTypeDictForMaterial(machine_definition, material_containers[0]) - common_quality_types = set(quality_type_dict.keys()) - for material_container in material_containers[1:]: - next_quality_type_dict = self.__fetchQualityTypeDictForMaterial(machine_definition, material_container) - common_quality_types.intersection_update(set(next_quality_type_dict.keys())) - - return list(common_quality_types) - - def findAllQualitiesForMachineAndMaterials(self, machine_definition: "DefinitionContainerInterface", material_containers: List[InstanceContainer]) -> List[InstanceContainer]: - # Determine the common set of quality types which can be - # applied to all of the materials for this machine. - quality_type_dict = self.__fetchQualityTypeDictForMaterial(machine_definition, material_containers[0]) - qualities = set(quality_type_dict.values()) - for material_container in material_containers[1:]: - next_quality_type_dict = self.__fetchQualityTypeDictForMaterial(machine_definition, material_container) - qualities.intersection_update(set(next_quality_type_dict.values())) - - return list(qualities) - - ## Fetches a dict of quality types names to quality profiles for a combination of machine and material. - # - # \param machine_definition \type{DefinitionContainer} the machine definition. - # \param material \type{InstanceContainer} the material. - # \return \type{Dict[str, InstanceContainer]} the dict of suitable quality type names mapping to qualities. - def __fetchQualityTypeDictForMaterial(self, machine_definition: "DefinitionContainerInterface", material: InstanceContainer) -> Dict[str, InstanceContainer]: - qualities = self.findAllQualitiesForMachineMaterial(machine_definition, material) - quality_type_dict = {} - for quality in qualities: - quality_type_dict[quality.getMetaDataEntry("quality_type")] = quality - return quality_type_dict - - ## Find a quality container by quality type. - # - # \param quality_type \type{str} the name of the quality type to search for. - # \param machine_definition (Optional) \type{InstanceContainer} If nothing is - # specified then the currently selected machine definition is used. - # \param material_containers_metadata If nothing is specified then the - # current set of selected materials is used. - # \return the matching quality container \type{InstanceContainer} - def findQualityByQualityType(self, quality_type: str, machine_definition: Optional["DefinitionContainerInterface"] = None, material_containers_metadata: Optional[List[Dict[str, Any]]] = None, **kwargs) -> InstanceContainer: - criteria = kwargs - criteria["type"] = "quality" - if quality_type: - criteria["quality_type"] = quality_type - result = self._getFilteredContainersForStack(machine_definition, material_containers_metadata, **criteria) - # Fall back to using generic materials and qualities if nothing could be found. - if not result and material_containers_metadata and len(material_containers_metadata) == 1: - basic_materials = self._getBasicMaterialMetadatas(material_containers_metadata[0]) - if basic_materials: - result = self._getFilteredContainersForStack(machine_definition, basic_materials, **criteria) - return result[0] if result else None - - ## Find all suitable qualities for a combination of machine and material. - # - # \param machine_definition \type{DefinitionContainer} the machine definition. - # \param material_container \type{InstanceContainer} the material. - # \return \type{List[InstanceContainer]} the list of suitable qualities. - def findAllQualitiesForMachineMaterial(self, machine_definition: "DefinitionContainerInterface", material_container: InstanceContainer) -> List[InstanceContainer]: - criteria = {"type": "quality"} - result = self._getFilteredContainersForStack(machine_definition, [material_container.getMetaData()], **criteria) - if not result: - basic_materials = self._getBasicMaterialMetadatas(material_container.getMetaData()) - if basic_materials: - result = self._getFilteredContainersForStack(machine_definition, basic_materials, **criteria) - - return result - - ## Find all quality changes for a machine. - # - # \param machine_definition \type{DefinitionContainer} the machine definition. - # \return \type{List[InstanceContainer]} the list of quality changes - def findAllQualityChangesForMachine(self, machine_definition: "DefinitionContainerInterface") -> List[InstanceContainer]: - if machine_definition.getMetaDataEntry("has_machine_quality"): - definition_id = machine_definition.getId() - else: - definition_id = "fdmprinter" - - filter_dict = { "type": "quality_changes", "definition": definition_id } - quality_changes_list = ContainerRegistry.getInstance().findInstanceContainers(**filter_dict) - return quality_changes_list - - def findAllExtruderDefinitionsForMachine(self, machine_definition: "DefinitionContainerInterface") -> List["DefinitionContainerInterface"]: - filter_dict = { "machine": machine_definition.getId() } - return ContainerRegistry.getInstance().findDefinitionContainers(**filter_dict) - - ## Find all quality changes for a given extruder. - # - # \param extruder_definition The extruder to find the quality changes for. - # \return The list of quality changes for the given extruder. - def findAllQualityChangesForExtruder(self, extruder_definition: "DefinitionContainerInterface") -> List[InstanceContainer]: - filter_dict = {"type": "quality_changes", "extruder": extruder_definition.getId()} - return ContainerRegistry.getInstance().findInstanceContainers(**filter_dict) - - ## Find all usable qualities for a machine and extruders. - # - # Finds all of the qualities for this combination of machine and extruders. - # Only one quality per quality type is returned. i.e. if there are 2 qualities with quality_type=normal - # then only one of then is returned (at random). - # - # \param global_container_stack \type{GlobalStack} the global machine definition - # \param extruder_stacks \type{List[ExtruderStack]} the list of extruder stacks - # \return \type{List[InstanceContainer]} the list of the matching qualities. The quality profiles - # return come from the first extruder in the given list of extruders. - def findAllUsableQualitiesForMachineAndExtruders(self, global_container_stack: "GlobalStack", extruder_stacks: List["ExtruderStack"]) -> List[InstanceContainer]: - global_machine_definition = global_container_stack.getBottom() - - machine_manager = Application.getInstance().getMachineManager() - active_stack_id = machine_manager.activeStackId - - materials = [] - - for stack in extruder_stacks: - if stack.getId() == active_stack_id and machine_manager.newMaterial: - materials.append(machine_manager.newMaterial) - else: - materials.append(stack.material) - - quality_types = self.findAllQualityTypesForMachineAndMaterials(global_machine_definition, materials) - - # Map the list of quality_types to InstanceContainers - qualities = self.findAllQualitiesForMachineMaterial(global_machine_definition, materials[0]) - quality_type_dict = {} - for quality in qualities: - quality_type_dict[quality.getMetaDataEntry("quality_type")] = quality - - return [quality_type_dict[quality_type] for quality_type in quality_types] - - ## Fetch more basic versions of a material. - # - # This tries to find a generic or basic version of the given material. - # \param material_container \type{Dict[str, Any]} The metadata of a - # material to find the basic versions of. - # \return \type{List[Dict[str, Any]]} A list of the metadata of basic - # materials, or an empty list if none could be found. - def _getBasicMaterialMetadatas(self, material_container: Dict[str, Any]) -> List[Dict[str, Any]]: - if "definition" not in material_container: - definition_id = "fdmprinter" - else: - material_container_definition = ContainerRegistry.getInstance().findDefinitionContainersMetadata(id = material_container["definition"]) - if not material_container_definition: - definition_id = "fdmprinter" - else: - material_container_definition = material_container_definition[0] - if "has_machine_quality" not in material_container_definition: - definition_id = "fdmprinter" - else: - definition_id = material_container_definition.get("quality_definition", material_container_definition["id"]) - - base_material = material_container.get("material") - if base_material: - # There is a basic material specified - criteria = { - "type": "material", - "name": base_material, - "definition": definition_id, - "variant": material_container.get("variant") - } - containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(**criteria) - return containers - - return [] - - def _getFilteredContainers(self, **kwargs): - return self._getFilteredContainersForStack(None, None, **kwargs) - - def _getFilteredContainersForStack(self, machine_definition: "DefinitionContainerInterface" = None, material_metadata: Optional[List[Dict[str, Any]]] = None, **kwargs): - # Fill in any default values. - if machine_definition is None: - machine_definition = Application.getInstance().getGlobalContainerStack().getBottom() - quality_definition_id = machine_definition.getMetaDataEntry("quality_definition") - if quality_definition_id is not None: - machine_definition = ContainerRegistry.getInstance().findDefinitionContainers(id = quality_definition_id)[0] - - if not material_metadata: - active_stacks = ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks() - if active_stacks: - material_metadata = [stack.material.getMetaData() for stack in active_stacks] - - criteria = kwargs - filter_by_material = False - - machine_definition = self.getParentMachineDefinition(machine_definition) - criteria["definition"] = machine_definition.getId() - found_containers_with_machine_definition = ContainerRegistry.getInstance().findInstanceContainersMetadata(**criteria) - whole_machine_definition = self.getWholeMachineDefinition(machine_definition) - if whole_machine_definition.getMetaDataEntry("has_machine_quality"): - definition_id = machine_definition.getMetaDataEntry("quality_definition", whole_machine_definition.getId()) - criteria["definition"] = definition_id - - filter_by_material = whole_machine_definition.getMetaDataEntry("has_materials") - # only fall back to "fdmprinter" when there is no container for this machine - elif not found_containers_with_machine_definition: - criteria["definition"] = "fdmprinter" - - # Stick the material IDs in a set - material_ids = set() - - for material_instance in material_metadata: - if material_instance is not None: - # Add the parent material too. - for basic_material in self._getBasicMaterialMetadatas(material_instance): - material_ids.add(basic_material["id"]) - material_ids.add(material_instance["id"]) - containers = ContainerRegistry.getInstance().findInstanceContainers(**criteria) - - result = [] - for container in containers: - # If the machine specifies we should filter by material, exclude containers that do not match any active material. - if filter_by_material and container.getMetaDataEntry("material") not in material_ids and "global_quality" not in kwargs: - continue - result.append(container) - - return result - - ## Get the parent machine definition of a machine definition. - # - # \param machine_definition \type{DefinitionContainer} This may be a normal machine definition or - # an extruder definition. - # \return \type{DefinitionContainer} the parent machine definition. If the given machine - # definition doesn't have a parent then it is simply returned. - def getParentMachineDefinition(self, machine_definition: "DefinitionContainerInterface") -> "DefinitionContainerInterface": - container_registry = ContainerRegistry.getInstance() - - machine_entry = machine_definition.getMetaDataEntry("machine") - if machine_entry is None: - # We have a normal (whole) machine defintion - quality_definition = machine_definition.getMetaDataEntry("quality_definition") - if quality_definition is not None: - parent_machine_definition = container_registry.findDefinitionContainers(id = quality_definition)[0] - return self.getParentMachineDefinition(parent_machine_definition) - else: - return machine_definition - else: - # This looks like an extruder. Find the rest of the machine. - whole_machine = container_registry.findDefinitionContainers(id = machine_entry)[0] - parent_machine = self.getParentMachineDefinition(whole_machine) - if whole_machine is parent_machine: - # This extruder already belongs to a 'parent' machine def. - return machine_definition - else: - # Look up the corresponding extruder definition in the parent machine definition. - extruder_position = machine_definition.getMetaDataEntry("position") - parent_extruder_id = parent_machine.getMetaDataEntry("machine_extruder_trains")[extruder_position] - return container_registry.findDefinitionContainers(id = parent_extruder_id)[0] - - ## Get the whole/global machine definition from an extruder definition. - # - # \param machine_definition \type{DefinitionContainer} This may be a normal machine definition or - # an extruder definition. - # \return \type{DefinitionContainerInterface} - def getWholeMachineDefinition(self, machine_definition: "DefinitionContainerInterface") -> "DefinitionContainerInterface": - machine_entry = machine_definition.getMetaDataEntry("machine") - if machine_entry is None: - # This already is a 'global' machine definition. - return machine_definition - else: - container_registry = ContainerRegistry.getInstance() - whole_machine = container_registry.findDefinitionContainers(id = machine_entry)[0] - return whole_machine diff --git a/cura/Scene/ConvexHullNode.py b/cura/Scene/ConvexHullNode.py index 6c8c201498..1131958627 100644 --- a/cura/Scene/ConvexHullNode.py +++ b/cura/Scene/ConvexHullNode.py @@ -68,7 +68,7 @@ class ConvexHullNode(SceneNode): ConvexHullNode.shader.setUniformValue("u_opacity", 0.6) if self.getParent(): - if self.getMeshData() and isinstance(self._node, SceneNode) and self._node.callDecoration("getBuildPlateNumber") == Application.getInstance().getBuildPlateModel().activeBuildPlate: + if self.getMeshData() and isinstance(self._node, SceneNode) and self._node.callDecoration("getBuildPlateNumber") == Application.getInstance().getMultiBuildPlateModel().activeBuildPlate: renderer.queueNode(self, transparent = True, shader = ConvexHullNode.shader, backface_cull = True, sort = -8) if self._convex_hull_head_mesh: renderer.queueNode(self, shader = ConvexHullNode.shader, transparent = True, mesh = self._convex_hull_head_mesh, backface_cull = True, sort = -8) diff --git a/cura/Scene/CuraSceneController.py b/cura/Scene/CuraSceneController.py index 1c008d1893..749c5257a2 100644 --- a/cura/Scene/CuraSceneController.py +++ b/cura/Scene/CuraSceneController.py @@ -4,7 +4,7 @@ from PyQt5.QtCore import Qt, pyqtSlot, QObject from PyQt5.QtWidgets import QApplication from cura.ObjectsModel import ObjectsModel -from cura.BuildPlateModel import BuildPlateModel +from cura.Machines.Models.MultiBuildPlateModel import MultiBuildPlateModel from UM.Application import Application from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator @@ -16,11 +16,11 @@ from UM.Signal import Signal class CuraSceneController(QObject): activeBuildPlateChanged = Signal() - def __init__(self, objects_model: ObjectsModel, build_plate_model: BuildPlateModel): + def __init__(self, objects_model: ObjectsModel, multi_build_plate_model: MultiBuildPlateModel): super().__init__() self._objects_model = objects_model - self._build_plate_model = build_plate_model + self._multi_build_plate_model = multi_build_plate_model self._active_build_plate = -1 self._last_selected_index = 0 @@ -41,9 +41,9 @@ class CuraSceneController(QObject): self._max_build_plate = max_build_plate changed = True if changed: - self._build_plate_model.setMaxBuildPlate(self._max_build_plate) + self._multi_build_plate_model.setMaxBuildPlate(self._max_build_plate) build_plates = [{"name": "Build Plate %d" % (i + 1), "buildPlateNumber": i} for i in range(self._max_build_plate + 1)] - self._build_plate_model.setItems(build_plates) + self._multi_build_plate_model.setItems(build_plates) if self._active_build_plate > self._max_build_plate: build_plate_number = 0 if self._last_selected_index >= 0: # go to the buildplate of the item you last selected @@ -104,12 +104,12 @@ class CuraSceneController(QObject): self._active_build_plate = nr Selection.clear() - self._build_plate_model.setActiveBuildPlate(nr) + self._multi_build_plate_model.setActiveBuildPlate(nr) self._objects_model.setActiveBuildPlate(nr) self.activeBuildPlateChanged.emit() @staticmethod def createCuraSceneController(): objects_model = Application.getInstance().getObjectsModel() - build_plate_model = Application.getInstance().getBuildPlateModel() - return CuraSceneController(objects_model = objects_model, build_plate_model = build_plate_model) + multi_build_plate_model = Application.getInstance().getMultiBuildPlateModel() + return CuraSceneController(objects_model = objects_model, multi_build_plate_model = multi_build_plate_model) diff --git a/cura/Scene/CuraSceneNode.py b/cura/Scene/CuraSceneNode.py index 969d491f49..df346baaad 100644 --- a/cura/Scene/CuraSceneNode.py +++ b/cura/Scene/CuraSceneNode.py @@ -20,10 +20,10 @@ class CuraSceneNode(SceneNode): return self._outside_buildarea or self.callDecoration("getBuildPlateNumber") < 0 def isVisible(self): - return super().isVisible() and self.callDecoration("getBuildPlateNumber") == Application.getInstance().getBuildPlateModel().activeBuildPlate + return super().isVisible() and self.callDecoration("getBuildPlateNumber") == Application.getInstance().getMultiBuildPlateModel().activeBuildPlate def isSelectable(self) -> bool: - return super().isSelectable() and self.callDecoration("getBuildPlateNumber") == Application.getInstance().getBuildPlateModel().activeBuildPlate + return super().isSelectable() and self.callDecoration("getBuildPlateNumber") == Application.getInstance().getMultiBuildPlateModel().activeBuildPlate ## Get the extruder used to print this node. If there is no active node, then the extruder in position zero is returned # TODO The best way to do it is by adding the setActiveExtruder decorator to every node when is loaded diff --git a/cura/Settings/ContainerManager.py b/cura/Settings/ContainerManager.py index d2e8410dde..f910f0c0e2 100644 --- a/cura/Settings/ContainerManager.py +++ b/cura/Settings/ContainerManager.py @@ -1,16 +1,14 @@ # Copyright (c) 2017 Ultimaker B.V. # Cura is released under the terms of the LGPLv3 or higher. -import copy import os.path import urllib.parse import uuid -from typing import Any, Dict, List, Union +from typing import Dict, Union from PyQt5.QtCore import QObject, QUrl, QVariant from UM.FlameProfiler import pyqtSlot from PyQt5.QtWidgets import QMessageBox -from UM.Util import parseBool from UM.PluginRegistry import PluginRegistry from UM.SaveFile import SaveFile @@ -22,7 +20,6 @@ from UM.Application import Application from UM.Settings.ContainerStack import ContainerStack from UM.Settings.DefinitionContainer import DefinitionContainer from UM.Settings.InstanceContainer import InstanceContainer -from cura.QualityManager import QualityManager from UM.MimeTypeDatabase import MimeTypeNotFoundError from UM.Settings.ContainerRegistry import ContainerRegistry @@ -30,9 +27,11 @@ from UM.Settings.ContainerRegistry import ContainerRegistry from UM.i18n import i18nCatalog from cura.Settings.ExtruderManager import ExtruderManager +from cura.Settings.ExtruderStack import ExtruderStack catalog = i18nCatalog("cura") + ## Manager class that contains common actions to deal with containers in Cura. # # This is primarily intended as a class to be able to perform certain actions @@ -42,154 +41,12 @@ class ContainerManager(QObject): def __init__(self, parent = None): super().__init__(parent) + self._application = Application.getInstance() self._container_registry = ContainerRegistry.getInstance() - self._machine_manager = Application.getInstance().getMachineManager() + self._machine_manager = self._application.getMachineManager() + self._material_manager = self._application.getMaterialManager() self._container_name_filters = {} - ## Create a duplicate of the specified container - # - # This will create and add a duplicate of the container corresponding - # to the container ID. - # - # \param container_id \type{str} The ID of the container to duplicate. - # - # \return The ID of the new container, or an empty string if duplication failed. - @pyqtSlot(str, result = str) - def duplicateContainer(self, container_id): - #TODO: It should be able to duplicate a container of which only the metadata is known. - containers = self._container_registry.findContainers(id = container_id) - if not containers: - Logger.log("w", "Could duplicate container %s because it was not found.", container_id) - return "" - - container = containers[0] - new_container = self.duplicateContainerInstance(container) - return new_container.getId() - - ## Create a duplicate of the given container instance - # - # This will create and add a duplicate of the container that was passed. - # - # \param container \type{ContainerInterface} The container to duplicate. - # - # \return The duplicated container, or None if duplication failed. - def duplicateContainerInstance(self, container): - new_container = None - new_name = self._container_registry.uniqueName(container.getName()) - # Only InstanceContainer has a duplicate method at the moment. - # So fall back to serialize/deserialize when no duplicate method exists. - if hasattr(container, "duplicate"): - new_container = container.duplicate(new_name) - else: - new_container = container.__class__(new_name) - new_container.deserialize(container.serialize()) - new_container.setName(new_name) - - # TODO: we probably don't want to add it to the registry here! - if new_container: - self._container_registry.addContainer(new_container) - - return new_container - - ## Change the name of a specified container to a new name. - # - # \param container_id \type{str} The ID of the container to change the name of. - # \param new_id \type{str} The new ID of the container. - # \param new_name \type{str} The new name of the specified container. - # - # \return True if successful, False if not. - @pyqtSlot(str, str, str, result = bool) - def renameContainer(self, container_id, new_id, new_name): - containers = self._container_registry.findContainers(id = container_id) - if not containers: - Logger.log("w", "Could rename container %s because it was not found.", container_id) - return False - - container = containers[0] - # First, remove the container from the registry. This will clean up any files related to the container. - self._container_registry.removeContainer(container_id) - - # Ensure we have a unique name for the container - new_name = self._container_registry.uniqueName(new_name) - - # Then, update the name and ID of the container - container.setName(new_name) - container._id = new_id # TODO: Find a nicer way to set a new, unique ID - - # Finally, re-add the container so it will be properly serialized again. - self._container_registry.addContainer(container) - - return True - - ## Remove the specified container. - # - # \param container_id \type{str} The ID of the container to remove. - # - # \return True if the container was successfully removed, False if not. - @pyqtSlot(str, result = bool) - def removeContainer(self, container_id): - containers = self._container_registry.findContainers(id = container_id) - if not containers: - Logger.log("w", "Could not remove container %s because it was not found.", container_id) - return False - - self._container_registry.removeContainer(containers[0].getId()) - - return True - - ## Merge a container with another. - # - # This will try to merge one container into the other, by going through the container - # and setting the right properties on the other container. - # - # \param merge_into_id \type{str} The ID of the container to merge into. - # \param merge_id \type{str} The ID of the container to merge. - # - # \return True if successfully merged, False if not. - @pyqtSlot(str, result = bool) - def mergeContainers(self, merge_into_id, merge_id): - containers = self._container_registry.findContainers(id = merge_into_id) - if not containers: - Logger.log("w", "Could merge into container %s because it was not found.", merge_into_id) - return False - - merge_into = containers[0] - - containers = self._container_registry.findContainers(id = merge_id) - if not containers: - Logger.log("w", "Could not merge container %s because it was not found", merge_id) - return False - - merge = containers[0] - - if not isinstance(merge, type(merge_into)): - Logger.log("w", "Cannot merge two containers of different types") - return False - - self._performMerge(merge_into, merge) - - return True - - ## Clear the contents of a container. - # - # \param container_id \type{str} The ID of the container to clear. - # - # \return True if successful, False if not. - @pyqtSlot(str, result = bool) - def clearContainer(self, container_id): - if self._container_registry.isReadOnly(container_id): - Logger.log("w", "Cannot clear read-only container %s", container_id) - return False - - containers = self._container_registry.findContainers(id = container_id) - if not containers: - Logger.log("w", "Could clear container %s because it was not found.", container_id) - return False - - containers[0].clear() - - return True - @pyqtSlot(str, str, result=str) def getContainerMetaDataEntry(self, container_id, entry_name): metadatas = self._container_registry.findContainersMetadata(id = container_id) @@ -211,18 +68,15 @@ class ContainerManager(QObject): # \param entry_value The new value of the entry. # # \return True if successful, False if not. - @pyqtSlot(str, str, str, result = bool) - def setContainerMetaDataEntry(self, container_id, entry_name, entry_value): - if self._container_registry.isReadOnly(container_id): - Logger.log("w", "Cannot set metadata of read-only container %s.", container_id) + # TODO: This is ONLY used by MaterialView for material containers. Maybe refactor this. + @pyqtSlot("QVariant", str, str) + def setContainerMetaDataEntry(self, container_node, entry_name, entry_value): + root_material_id = container_node.metadata["base_file"] + if self._container_registry.isReadOnly(root_material_id): + Logger.log("w", "Cannot set metadata of read-only container %s.", root_material_id) return False - containers = self._container_registry.findContainers(id = container_id) #We need the complete container, since we need to know whether the container is read-only or not. - if not containers: - Logger.log("w", "Could not set metadata of container %s because it was not found.", container_id) - return False - - container = containers[0] + material_group = self._material_manager.getMaterialGroup(root_material_id) entries = entry_name.split("/") entry_name = entries.pop() @@ -230,7 +84,7 @@ class ContainerManager(QObject): sub_item_changed = False if entries: root_name = entries.pop(0) - root = container.getMetaDataEntry(root_name) + root = material_group.root_material_node.metadata.get(root_name) item = root for _ in range(len(entries)): @@ -243,12 +97,11 @@ class ContainerManager(QObject): entry_name = root_name entry_value = root + container = material_group.root_material_node.getContainer() container.setMetaDataEntry(entry_name, entry_value) if sub_item_changed: #If it was only a sub-item that has changed then the setMetaDataEntry won't correctly notice that something changed, and we must manually signal that the metadata changed. container.metaDataChanged.emit(container) - return True - ## Set a setting property of the specified container. # # This will set the specified property of the specified setting of the container @@ -306,60 +159,6 @@ class ContainerManager(QObject): return container.getProperty(setting_key, property_name) - ## Set the name of the specified container. - @pyqtSlot(str, str, result = bool) - def setContainerName(self, container_id, new_name): - if self._container_registry.isReadOnly(container_id): - Logger.log("w", "Cannot set name of read-only container %s.", container_id) - return False - - containers = self._container_registry.findContainers(id = container_id) #We need to get the full container, not just metadata, since we need to know whether it's read-only. - if not containers: - Logger.log("w", "Could not set name of container %s because it was not found.", container_id) - return False - - containers[0].setName(new_name) - - return True - - ## Find instance containers matching certain criteria. - # - # This effectively forwards to - # ContainerRegistry::findInstanceContainersMetadata. - # - # \param criteria A dict of key - value pairs to search for. - # - # \return A list of container IDs that match the given criteria. - @pyqtSlot("QVariantMap", result = "QVariantList") - def findInstanceContainers(self, criteria): - return [entry["id"] for entry in self._container_registry.findInstanceContainersMetadata(**criteria)] - - @pyqtSlot(str, result = bool) - def isContainerUsed(self, container_id): - Logger.log("d", "Checking if container %s is currently used", container_id) - # check if this is a material container. If so, check if any material with the same base is being used by any - # stacks. - container_ids_to_check = [container_id] - container_results = self._container_registry.findInstanceContainersMetadata(id = container_id, type = "material") - if container_results: - this_container = container_results[0] - material_base_file = this_container["id"] - if "base_file" in this_container: - material_base_file = this_container["base_file"] - # check all material container IDs with the same base - material_containers = self._container_registry.findInstanceContainersMetadata(base_file = material_base_file, - type = "material") - if material_containers: - container_ids_to_check = [container["id"] for container in material_containers] - - all_stacks = self._container_registry.findContainerStacks() - for stack in all_stacks: - for used_container_id in container_ids_to_check: - if used_container_id in [child.getId() for child in stack.getContainers()]: - Logger.log("d", "The container is in use by %s", stack.getId()) - return True - return False - @pyqtSlot(str, result = str) def makeUniqueName(self, original_name): return self._container_registry.uniqueName(original_name) @@ -399,7 +198,7 @@ class ContainerManager(QObject): @pyqtSlot(str, str, QUrl, result = "QVariantMap") def exportContainer(self, container_id: str, file_type: str, file_url_or_string: Union[QUrl, str]) -> Dict[str, str]: if not container_id or not file_type or not file_url_or_string: - return { "status": "error", "message": "Invalid arguments"} + return {"status": "error", "message": "Invalid arguments"} if isinstance(file_url_or_string, QUrl): file_url = file_url_or_string.toLocalFile() @@ -407,20 +206,20 @@ class ContainerManager(QObject): file_url = file_url_or_string if not file_url: - return { "status": "error", "message": "Invalid path"} + return {"status": "error", "message": "Invalid path"} mime_type = None - if not file_type in self._container_name_filters: + if file_type not in self._container_name_filters: try: mime_type = MimeTypeDatabase.getMimeTypeForFile(file_url) except MimeTypeNotFoundError: - return { "status": "error", "message": "Unknown File Type" } + return {"status": "error", "message": "Unknown File Type"} else: mime_type = self._container_name_filters[file_type]["mime"] containers = self._container_registry.findContainers(id = container_id) if not containers: - return { "status": "error", "message": "Container not found"} + return {"status": "error", "message": "Container not found"} container = containers[0] if Platform.isOSX() and "." in file_url: @@ -437,12 +236,12 @@ class ContainerManager(QObject): result = QMessageBox.question(None, catalog.i18nc("@title:window", "File Already Exists"), catalog.i18nc("@label Don't translate the XML tag !", "The file {0} already exists. Are you sure you want to overwrite it?").format(file_url)) if result == QMessageBox.No: - return { "status": "cancelled", "message": "User cancelled"} + return {"status": "cancelled", "message": "User cancelled"} try: contents = container.serialize() except NotImplementedError: - return { "status": "error", "message": "Unable to serialize container"} + return {"status": "error", "message": "Unable to serialize container"} if contents is None: return {"status": "error", "message": "Serialization returned None. Unable to write to file"} @@ -450,7 +249,7 @@ class ContainerManager(QObject): with SaveFile(file_url, "w") as f: f.write(contents) - return { "status": "success", "message": "Succesfully exported container", "path": file_url} + return {"status": "success", "message": "Successfully exported container", "path": file_url} ## Imports a profile from a file # @@ -461,7 +260,7 @@ class ContainerManager(QObject): @pyqtSlot(QUrl, result = "QVariantMap") def importMaterialContainer(self, file_url_or_string: Union[QUrl, str]) -> Dict[str, str]: if not file_url_or_string: - return { "status": "error", "message": "Invalid path"} + return {"status": "error", "message": "Invalid path"} if isinstance(file_url_or_string, QUrl): file_url = file_url_or_string.toLocalFile() @@ -469,16 +268,16 @@ class ContainerManager(QObject): file_url = file_url_or_string if not file_url or not os.path.exists(file_url): - return { "status": "error", "message": "Invalid path" } + return {"status": "error", "message": "Invalid path"} try: mime_type = MimeTypeDatabase.getMimeTypeForFile(file_url) except MimeTypeNotFoundError: - return { "status": "error", "message": "Could not determine mime type of file" } + return {"status": "error", "message": "Could not determine mime type of file"} container_type = self._container_registry.getContainerForMimeType(mime_type) if not container_type: - return { "status": "error", "message": "Could not find a container to handle the specified file."} + return {"status": "error", "message": "Could not find a container to handle the specified file."} container_id = urllib.parse.unquote_plus(mime_type.stripExtension(os.path.basename(file_url))) container_id = self._container_registry.uniqueName(container_id) @@ -489,7 +288,7 @@ class ContainerManager(QObject): with open(file_url, "rt", encoding = "utf-8") as f: container.deserialize(f.read()) except PermissionError: - return { "status": "error", "message": "Permission denied when trying to read the file"} + return {"status": "error", "message": "Permission denied when trying to read the file"} except Exception as ex: return {"status": "error", "message": str(ex)} @@ -497,7 +296,7 @@ class ContainerManager(QObject): self._container_registry.addContainer(container) - return { "status": "success", "message": "Successfully imported container {0}".format(container.getName()) } + return {"status": "success", "message": "Successfully imported container {0}".format(container.getName())} ## Update the current active quality changes container with the settings from the user container. # @@ -522,7 +321,7 @@ class ContainerManager(QObject): self._performMerge(quality_changes, stack.getTop()) - self._machine_manager.activeQualityChanged.emit() + self._machine_manager.activeQualityChangesGroupChanged.emit() return True @@ -542,407 +341,37 @@ class ContainerManager(QObject): for container in send_emits_containers: container.sendPostponedEmits() - ## Create quality changes containers from the user containers in the active stacks. - # - # This will go through the global and extruder stacks and create quality_changes containers from - # the user containers in each stack. These then replace the quality_changes containers in the - # stack and clear the user settings. - # - # \return \type{bool} True if the operation was successfully, False if not. - @pyqtSlot(str, result = bool) - def createQualityChanges(self, base_name): - global_stack = Application.getInstance().getGlobalContainerStack() - if not global_stack: - return False - - active_quality_name = self._machine_manager.activeQualityName - if active_quality_name == "": - Logger.log("w", "No quality container found in stack %s, cannot create profile", global_stack.getId()) - return False - - self._machine_manager.blurSettings.emit() - if base_name is None or base_name == "": - base_name = active_quality_name - unique_name = self._container_registry.uniqueName(base_name) - - # Go through the active stacks and create quality_changes containers from the user containers. - for stack in ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks(): - user_container = stack.getTop() - quality_container = stack.quality - quality_changes_container = stack.qualityChanges - if not quality_container or not quality_changes_container: - Logger.log("w", "No quality or quality changes container found in stack %s, ignoring it", stack.getId()) - continue - - extruder_id = None if stack is global_stack else QualityManager.getInstance().getParentMachineDefinition(stack.getBottom()).getId() - new_changes = self._createQualityChanges(quality_container, unique_name, - Application.getInstance().getGlobalContainerStack().getBottom(), - extruder_id) - self._performMerge(new_changes, quality_changes_container, clear_settings = False) - self._performMerge(new_changes, user_container) - - self._container_registry.addContainer(new_changes) - stack.replaceContainer(stack.getContainerIndex(quality_changes_container), new_changes) - - self._machine_manager.activeQualityChanged.emit() - return True - - ## Remove all quality changes containers matching a specified name. - # - # This will search for quality_changes containers matching the supplied name and remove them. - # Note that if the machine specifies that qualities should be filtered by machine and/or material - # only the containers related to the active machine/material are removed. - # - # \param quality_name The name of the quality changes to remove. - # - # \return \type{bool} True if successful, False if not. - @pyqtSlot(str, result = bool) - def removeQualityChanges(self, quality_name): - Logger.log("d", "Attempting to remove the quality change containers with name %s", quality_name) - containers_found = False - - if not quality_name: - return containers_found # Without a name we will never find a container to remove. - - # If the container that is being removed is the currently active quality, set another quality as the active quality - activate_quality = quality_name == self._machine_manager.activeQualityName - activate_quality_type = None - - global_stack = Application.getInstance().getGlobalContainerStack() - if not global_stack or not quality_name: - return "" - machine_definition = QualityManager.getInstance().getParentMachineDefinition(global_stack.getBottom()) - - for container in QualityManager.getInstance().findQualityChangesByName(quality_name, machine_definition): - containers_found = True - if activate_quality and not activate_quality_type: - activate_quality_type = container.getMetaDataEntry("quality") - self._container_registry.removeContainer(container.getId()) - - if not containers_found: - Logger.log("d", "Unable to remove quality containers, as we did not find any by the name of %s", quality_name) - - elif activate_quality: - definition_id = "fdmprinter" if not self._machine_manager.filterQualityByMachine else self._machine_manager.activeDefinitionId - containers = self._container_registry.findInstanceContainersMetadata(type = "quality", definition = definition_id, quality_type = activate_quality_type) - if containers: - self._machine_manager.setActiveQuality(containers[0]["id"]) - self._machine_manager.activeQualityChanged.emit() - - return containers_found - - ## Rename a set of quality changes containers. - # - # This will search for quality_changes containers matching the supplied name and rename them. - # Note that if the machine specifies that qualities should be filtered by machine and/or material - # only the containers related to the active machine/material are renamed. - # - # \param quality_name The name of the quality changes containers to rename. - # \param new_name The new name of the quality changes. - # - # \return True if successful, False if not. - @pyqtSlot(str, str, result = bool) - def renameQualityChanges(self, quality_name, new_name): - Logger.log("d", "User requested QualityChanges container rename of %s to %s", quality_name, new_name) - if not quality_name or not new_name: - return False - - if quality_name == new_name: - Logger.log("w", "Unable to rename %s to %s, because they are the same.", quality_name, new_name) - return True - - global_stack = Application.getInstance().getGlobalContainerStack() - if not global_stack: - return False - - self._machine_manager.blurSettings.emit() - - new_name = self._container_registry.uniqueName(new_name) - - container_registry = self._container_registry - - containers_to_rename = self._container_registry.findInstanceContainersMetadata(type = "quality_changes", name = quality_name) - - for container in containers_to_rename: - stack_id = global_stack.getId() - if "extruder" in container: - stack_id = container["extruder"] - container_registry.renameContainer(container["id"], new_name, self._createUniqueId(stack_id, new_name)) - - if not containers_to_rename: - Logger.log("e", "Unable to rename %s, because we could not find the profile", quality_name) - - self._machine_manager.activeQualityChanged.emit() - return True - - ## Duplicate a specified set of quality or quality_changes containers. - # - # This will search for containers matching the specified name. If the container is a "quality" type container, a new - # quality_changes container will be created with the specified quality as base. If the container is a "quality_changes" - # container, it is simply duplicated and renamed. - # - # \param quality_name The name of the quality to duplicate. - # - # \return A string containing the name of the duplicated containers, or an empty string if it failed. - @pyqtSlot(str, str, result = str) - def duplicateQualityOrQualityChanges(self, quality_name, base_name): - global_stack = Application.getInstance().getGlobalContainerStack() - if not global_stack or not quality_name: - return "" - machine_definition = global_stack.definition - - active_stacks = ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks() - if active_stacks is None: - return "" - material_metadatas = [stack.material.getMetaData() for stack in active_stacks] - - result = self._duplicateQualityOrQualityChangesForMachineType(quality_name, base_name, - QualityManager.getInstance().getParentMachineDefinition(machine_definition), - material_metadatas) - return result[0].getName() if result else "" - - ## Duplicate a quality or quality changes profile specific to a machine type - # - # \param quality_name The name of the quality or quality changes container to duplicate. - # \param base_name The desired name for the new container. - # \param machine_definition The machine with the specific machine type. - # \param material_metadatas Metadata of materials - # \return List of duplicated quality profiles. - def _duplicateQualityOrQualityChangesForMachineType(self, quality_name: str, base_name: str, machine_definition: DefinitionContainer, material_metadatas: List[Dict[str, Any]]) -> List[InstanceContainer]: - Logger.log("d", "Attempting to duplicate the quality %s", quality_name) - - if base_name is None: - base_name = quality_name - # Try to find a Quality with the name. - container = QualityManager.getInstance().findQualityByName(quality_name, machine_definition, material_metadatas) - if container: - Logger.log("d", "We found a quality to duplicate.") - return self._duplicateQualityForMachineType(container, base_name, machine_definition) - Logger.log("d", "We found a quality_changes to duplicate.") - # Assume it is a quality changes. - return self._duplicateQualityChangesForMachineType(quality_name, base_name, machine_definition) - - # Duplicate a quality profile - def _duplicateQualityForMachineType(self, quality_container, base_name, machine_definition) -> List[InstanceContainer]: - if base_name is None: - base_name = quality_container.getName() - new_name = self._container_registry.uniqueName(base_name) - - new_change_instances = [] - - # Handle the global stack first. - global_changes = self._createQualityChanges(quality_container, new_name, machine_definition, None) - new_change_instances.append(global_changes) - self._container_registry.addContainer(global_changes) - - # Handle the extruders if present. - extruders = machine_definition.getMetaDataEntry("machine_extruder_trains") - if extruders: - for extruder_id in extruders: - extruder = extruders[extruder_id] - new_changes = self._createQualityChanges(quality_container, new_name, machine_definition, extruder) - new_change_instances.append(new_changes) - self._container_registry.addContainer(new_changes) - - return new_change_instances - - # Duplicate a quality changes container - def _duplicateQualityChangesForMachineType(self, quality_changes_name, base_name, machine_definition) -> List[InstanceContainer]: - new_change_instances = [] - for container in QualityManager.getInstance().findQualityChangesByName(quality_changes_name, - machine_definition): - base_id = container.getMetaDataEntry("extruder") - if not base_id: - base_id = container.getDefinition().getId() - new_unique_id = self._createUniqueId(base_id, base_name) - new_container = container.duplicate(new_unique_id, base_name) - new_change_instances.append(new_container) - self._container_registry.addContainer(new_container) - - return new_change_instances - - ## Create a duplicate of a material, which has the same GUID and base_file metadata - # - # \return \type{str} the id of the newly created container. - @pyqtSlot(str, result = str) - def duplicateMaterial(self, material_id: str) -> str: - original = self._container_registry.findContainersMetadata(id = material_id) - if not original: - Logger.log("d", "Unable to duplicate the material with id %s, because it doesn't exist.", material_id) - return "" - original = original[0] - - base_container_id = original.get("base_file") - base_container = self._container_registry.findContainers(id = base_container_id) - if not base_container: - Logger.log("d", "Unable to duplicate the material with id {material_id}, because base_file {base_container_id} doesn't exist.".format(material_id = material_id, base_container_id = base_container_id)) - return "" - base_container = base_container[0] - - #We'll copy all containers with the same base. - #This way the correct variant and machine still gets assigned when loading the copy of the material. - containers_to_copy = self._container_registry.findInstanceContainers(base_file = base_container_id) - - # Ensure all settings are saved. - Application.getInstance().saveSettings() - - # Create a new ID & container to hold the data. - new_containers = [] - new_base_id = self._container_registry.uniqueName(base_container.getId()) - new_base_container = copy.deepcopy(base_container) - new_base_container.getMetaData()["id"] = new_base_id - new_base_container.getMetaData()["base_file"] = new_base_id - new_containers.append(new_base_container) - - #Clone all of them. - clone_of_original = None #Keeping track of which one is the clone of the original material, since we need to return that. - for container_to_copy in containers_to_copy: - #Create unique IDs for every clone. - current_id = container_to_copy.getId() - new_id = new_base_id - if container_to_copy.getMetaDataEntry("definition") != "fdmprinter": - new_id += "_" + container_to_copy.getMetaDataEntry("definition") - if container_to_copy.getMetaDataEntry("variant"): - variant = self._container_registry.findContainers(id = container_to_copy.getMetaDataEntry("variant"))[0] - new_id += "_" + variant.getName().replace(" ", "_") - if current_id == material_id: - clone_of_original = new_id - - new_container = copy.deepcopy(container_to_copy) - new_container.getMetaData()["id"] = new_id - new_container.getMetaData()["base_file"] = new_base_id - new_containers.append(new_container) - - for container_to_add in new_containers: - container_to_add.setDirty(True) - ContainerRegistry.getInstance().addContainer(container_to_add) - return self._getMaterialContainerIdForActiveMachine(clone_of_original) - - ## Create a duplicate of a material or it's original entry - # - # \return \type{str} the id of the newly created container. - @pyqtSlot(str, result = str) - def duplicateOriginalMaterial(self, material_id): - - # check if the given material has a base file (i.e. was shipped by default) - base_file = self.getContainerMetaDataEntry(material_id, "base_file") - - if base_file == "": - # there is no base file, so duplicate by ID - return self.duplicateMaterial(material_id) - else: - # there is a base file, so duplicate the original material - return self.duplicateMaterial(base_file) - - ## Create a new material by cloning Generic PLA for the current material diameter and setting the GUID to something unqiue - # - # \return \type{str} the id of the newly created container. - @pyqtSlot(result = str) - def createMaterial(self) -> str: - # Ensure all settings are saved. - Application.getInstance().saveSettings() - - global_stack = Application.getInstance().getGlobalContainerStack() - if not global_stack: - return "" - - approximate_diameter = str(round(global_stack.getProperty("material_diameter", "value"))) - containers = self._container_registry.findInstanceContainersMetadata(id = "generic_pla*", approximate_diameter = approximate_diameter) - if not containers: - Logger.log("d", "Unable to create a new material by cloning Generic PLA, because it cannot be found for the material diameter for this machine.") - return "" - - base_file = containers[0].get("base_file") - containers = self._container_registry.findInstanceContainers(id = base_file) - if not containers: - Logger.log("d", "Unable to create a new material by cloning Generic PLA, because the base file for Generic PLA for this machine can not be found.") - return "" - - # Create a new ID & container to hold the data. - new_id = self._container_registry.uniqueName("custom_material") - container_type = type(containers[0]) # Always XMLMaterialProfile, since we specifically clone the base_file - duplicated_container = container_type(new_id) - - # Instead of duplicating we load the data from the basefile again. - # This ensures that the inheritance goes well and all "cut up" subclasses of the xmlMaterial profile - # are also correctly created. - with open(containers[0].getPath(), encoding="utf-8") as f: - duplicated_container.deserialize(f.read()) - - duplicated_container.setMetaDataEntry("GUID", str(uuid.uuid4())) - duplicated_container.setMetaDataEntry("brand", catalog.i18nc("@label", "Custom")) - # We're defaulting to PLA, as machines with material profiles don't like material types they don't know. - # TODO: This is a hack, the only reason this is in now is to bandaid the problem as we're close to a release! - duplicated_container.setMetaDataEntry("material", "PLA") - duplicated_container.setName(catalog.i18nc("@label", "Custom Material")) - - self._container_registry.addContainer(duplicated_container) - return self._getMaterialContainerIdForActiveMachine(new_id) - - ## Find the id of a material container based on the new material - # Utilty function that is shared between duplicateMaterial and createMaterial - # - # \param base_file \type{str} the id of the created container. - def _getMaterialContainerIdForActiveMachine(self, base_file): - global_stack = Application.getInstance().getGlobalContainerStack() - if not global_stack: - return base_file - - has_machine_materials = parseBool(global_stack.getMetaDataEntry("has_machine_materials", default = False)) - has_variant_materials = parseBool(global_stack.getMetaDataEntry("has_variant_materials", default = False)) - has_variants = parseBool(global_stack.getMetaDataEntry("has_variants", default = False)) - if has_machine_materials or has_variant_materials: - if has_variants: - materials = self._container_registry.findInstanceContainersMetadata(type = "material", base_file = base_file, definition = global_stack.getBottom().getId(), variant = self._machine_manager.activeVariantId) - else: - materials = self._container_registry.findInstanceContainersMetadata(type = "material", base_file = base_file, definition = global_stack.getBottom().getId()) - - if materials: - return materials[0]["id"] - - Logger.log("w", "Unable to find a suitable container based on %s for the current machine.", base_file) - return "" # do not activate a new material if a container can not be found - - return base_file - ## Get a list of materials that have the same GUID as the reference material # # \param material_id \type{str} the id of the material for which to get the linked materials. # \return \type{list} a list of names of materials with the same GUID - @pyqtSlot(str, result = "QStringList") - def getLinkedMaterials(self, material_id: str): - containers = self._container_registry.findInstanceContainersMetadata(id = material_id) - if not containers: - Logger.log("d", "Unable to find materials linked to material with id %s, because it doesn't exist.", material_id) - return [] + @pyqtSlot("QVariant", result = "QStringList") + def getLinkedMaterials(self, material_node): + guid = material_node.metadata["GUID"] - material_container = containers[0] - material_base_file = material_container.get("base_file", "") - material_guid = material_container.get("GUID", "") - if not material_guid: - Logger.log("d", "Unable to find materials linked to material with id %s, because it doesn't have a GUID.", material_id) - return [] + material_group_list = self._material_manager.getMaterialGroupListByGUID(guid) - containers = self._container_registry.findInstanceContainersMetadata(type = "material", GUID = material_guid) linked_material_names = [] - for container in containers: - if container["id"] in [material_id, material_base_file] or container.get("base_file") != container["id"]: - continue - - linked_material_names.append(container["name"]) + if material_group_list: + for material_group in material_group_list: + linked_material_names.append(material_group.root_material_node.metadata["name"]) return linked_material_names ## Unlink a material from all other materials by creating a new GUID # \param material_id \type{str} the id of the material to create a new GUID for. - @pyqtSlot(str) - def unlinkMaterial(self, material_id: str): - containers = self._container_registry.findInstanceContainers(id=material_id) - if not containers: - Logger.log("d", "Unable to make the material with id %s unique, because it doesn't exist.", material_id) - return "" + @pyqtSlot("QVariant") + def unlinkMaterial(self, material_node): + # Get the material group + material_group = self._material_manager.getMaterialGroup(material_node.metadata["base_file"]) - containers[0].setMetaDataEntry("GUID", str(uuid.uuid4())) + # Generate a new GUID + new_guid = str(uuid.uuid4()) + # Update the GUID + # NOTE: We only need to set the root material container because XmlMaterialProfile.setMetaDataEntry() will + # take care of the derived containers too + container = material_group.root_material_node.getContainer() + container.setMetaDataEntry("GUID", new_guid) ## Get the singleton instance for this class. @classmethod @@ -1015,81 +444,6 @@ class ContainerManager(QObject): name_filter = "{0} ({1})".format(mime_type.comment, suffix_list) self._container_name_filters[name_filter] = entry - ## Creates a unique ID for a container by prefixing the name with the stack ID. - # - # This method creates a unique ID for a container by prefixing it with a specified stack ID. - # This is done to ensure we have an easily identified ID for quality changes, which have the - # same name across several stacks. - # - # \param stack_id The ID of the stack to prepend. - # \param container_name The name of the container that we are creating a unique ID for. - # - # \return Container name prefixed with stack ID, in lower case with spaces replaced by underscores. - def _createUniqueId(self, stack_id, container_name): - result = stack_id + "_" + container_name - result = result.lower() - result.replace(" ", "_") - return result - - ## Create a quality changes container for a specified quality container. - # - # \param quality_container The quality container to create a changes container for. - # \param new_name The name of the new quality_changes container. - # \param machine_definition The machine definition this quality changes container is specific to. - # \param extruder_id - # - # \return A new quality_changes container with the specified container as base. - def _createQualityChanges(self, quality_container, new_name, machine_definition, extruder_id): - base_id = machine_definition.getId() if extruder_id is None else extruder_id - - # Create a new quality_changes container for the quality. - quality_changes = InstanceContainer(self._createUniqueId(base_id, new_name)) - quality_changes.setName(new_name) - quality_changes.addMetaDataEntry("type", "quality_changes") - quality_changes.addMetaDataEntry("quality_type", quality_container.getMetaDataEntry("quality_type")) - - # If we are creating a container for an extruder, ensure we add that to the container - if extruder_id is not None: - quality_changes.addMetaDataEntry("extruder", extruder_id) - - # If the machine specifies qualities should be filtered, ensure we match the current criteria. - if not machine_definition.getMetaDataEntry("has_machine_quality"): - quality_changes.setDefinition("fdmprinter") - else: - quality_changes.setDefinition(QualityManager.getInstance().getParentMachineDefinition(machine_definition).getId()) - - from cura.CuraApplication import CuraApplication - quality_changes.addMetaDataEntry("setting_version", CuraApplication.SettingVersion) - return quality_changes - - - ## Import profiles from a list of file_urls. - # Each QUrl item must end with .curaprofile, or it will not be imported. - # - # \param QVariant, essentially a list with QUrl objects. - # \return Dict with keys status, text - @pyqtSlot("QVariantList", result="QVariantMap") - def importProfiles(self, file_urls): - status = "ok" - results = {"ok": [], "error": []} - for file_url in file_urls: - if not file_url.isValid(): - continue - path = file_url.toLocalFile() - if not path: - continue - if not path.endswith(".curaprofile"): - continue - - single_result = self._container_registry.importProfile(path) - if single_result["status"] == "error": - status = "error" - results[single_result["status"]].append(single_result["message"]) - - return { - "status": status, - "message": "\n".join(results["ok"] + results["error"])} - ## Import single profile, file_url does not have to end with curaprofile @pyqtSlot(QUrl, result="QVariantMap") def importProfile(self, file_url): @@ -1100,11 +454,13 @@ class ContainerManager(QObject): return return self._container_registry.importProfile(path) - @pyqtSlot("QVariantList", QUrl, str) - def exportProfile(self, instance_id: str, file_url: QUrl, file_type: str) -> None: + @pyqtSlot(QObject, QUrl, str) + def exportQualityChangesGroup(self, quality_changes_group, file_url: QUrl, file_type: str): if not file_url.isValid(): return path = file_url.toLocalFile() if not path: return - self._container_registry.exportProfile(instance_id, path, file_type) + + container_list = [n.getContainer() for n in quality_changes_group.getAllNodes()] + self._container_registry.exportQualityProfile(container_list, path, file_type) diff --git a/cura/Settings/ContainerSettingsModel.py b/cura/Settings/ContainerSettingsModel.py deleted file mode 100644 index 2c4bef6464..0000000000 --- a/cura/Settings/ContainerSettingsModel.py +++ /dev/null @@ -1,97 +0,0 @@ -# Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the LGPLv3 or higher. - -from UM.Application import Application -from UM.Qt.ListModel import ListModel - -from PyQt5.QtCore import pyqtProperty, Qt, pyqtSignal, pyqtSlot, QUrl - -from UM.Settings.ContainerRegistry import ContainerRegistry -from UM.Settings.InstanceContainer import InstanceContainer -from UM.Settings.SettingFunction import SettingFunction - -class ContainerSettingsModel(ListModel): - LabelRole = Qt.UserRole + 1 - CategoryRole = Qt.UserRole + 2 - UnitRole = Qt.UserRole + 3 - ValuesRole = Qt.UserRole + 4 - - def __init__(self, parent = None): - super().__init__(parent) - self.addRoleName(self.LabelRole, "label") - self.addRoleName(self.CategoryRole, "category") - self.addRoleName(self.UnitRole, "unit") - self.addRoleName(self.ValuesRole, "values") - - self._container_ids = [] - self._containers = [] - - def _onPropertyChanged(self, key, property_name): - if property_name == "value": - self._update() - - def _update(self): - items = [] - - if len(self._container_ids) == 0: - return - - keys = [] - for container in self._containers: - keys = keys + list(container.getAllKeys()) - - keys = list(set(keys)) # remove duplicate keys - - for key in keys: - definition = None - category = None - values = [] - for container in self._containers: - instance = container.getInstance(key) - if instance: - definition = instance.definition - - # Traverse up to find the category - category = definition - while category.type != "category": - category = category.parent - - value = container.getProperty(key, "value") - if type(value) == SettingFunction: - values.append("=\u0192") - else: - values.append(container.getProperty(key, "value")) - else: - values.append("") - - items.append({ - "key": key, - "values": values, - "label": definition.label, - "unit": definition.unit, - "category": category.label - }) - items.sort(key = lambda k: (k["category"], k["key"])) - self.setItems(items) - - ## Set the ids of the containers which have the settings this model should list. - # Also makes sure the model updates when the containers have property changes - def setContainers(self, container_ids): - for container in self._containers: - container.propertyChanged.disconnect(self._onPropertyChanged) - - self._container_ids = container_ids - self._containers = [] - - for container_id in self._container_ids: - containers = ContainerRegistry.getInstance().findContainers(id = container_id) - if containers: - containers[0].propertyChanged.connect(self._onPropertyChanged) - self._containers.append(containers[0]) - - self._update() - - containersChanged = pyqtSignal() - @pyqtProperty("QVariantList", fset = setContainers, notify = containersChanged) - def containers(self): - return self.container_ids diff --git a/cura/Settings/CuraContainerRegistry.py b/cura/Settings/CuraContainerRegistry.py index 540f0b3475..e79cfa5335 100644 --- a/cura/Settings/CuraContainerRegistry.py +++ b/cura/Settings/CuraContainerRegistry.py @@ -25,14 +25,15 @@ from UM.Resources import Resources from . import ExtruderStack from . import GlobalStack -from .ContainerManager import ContainerManager from .ExtruderManager import ExtruderManager from cura.CuraApplication import CuraApplication +from cura.Machines.QualityManager import getMachineDefinitionIDForQualitySearch from UM.i18n import i18nCatalog catalog = i18nCatalog("cura") + class CuraContainerRegistry(ContainerRegistry): def __init__(self, *args, **kwargs): super().__init__(*args, **kwargs) @@ -102,7 +103,7 @@ class CuraContainerRegistry(ContainerRegistry): # \param instance_ids \type{list} the IDs of the profiles to export. # \param file_name \type{str} the full path and filename to export to. # \param file_type \type{str} the file type with the format " (*.)" - def exportProfile(self, instance_ids, file_name, file_type): + def exportQualityProfile(self, container_list, file_name, file_type): # Parse the fileType to deduce what plugin can save the file format. # fileType has the format " (*.)" split = file_type.rfind(" (*.") # Find where the description ends and the extension starts. @@ -121,31 +122,10 @@ class CuraContainerRegistry(ContainerRegistry): catalog.i18nc("@label Don't translate the XML tag !", "The file {0} already exists. Are you sure you want to overwrite it?").format(file_name)) if result == QMessageBox.No: return - found_containers = [] - extruder_positions = [] - for instance_id in instance_ids: - containers = ContainerRegistry.getInstance().findInstanceContainers(id = instance_id) - if containers: - found_containers.append(containers[0]) - - # Determine the position of the extruder of this container - extruder_id = containers[0].getMetaDataEntry("extruder", "") - if extruder_id == "": - # Global stack - extruder_positions.append(-1) - else: - extruder_containers = ContainerRegistry.getInstance().findDefinitionContainersMetadata(id = extruder_id) - if extruder_containers: - extruder_positions.append(int(extruder_containers[0].get("position", 0))) - else: - extruder_positions.append(0) - # Ensure the profiles are always exported in order (global, extruder 0, extruder 1, ...) - found_containers = [containers for (positions, containers) in sorted(zip(extruder_positions, found_containers))] profile_writer = self._findProfileWriter(extension, description) - try: - success = profile_writer.write(file_name, found_containers) + success = profile_writer.write(file_name, container_list) except Exception as e: Logger.log("e", "Failed to export profile to %s: %s", file_name, str(e)) m = Message(catalog.i18nc("@info:status Don't translate the XML tags or !", "Failed to export profile to {0}: {1}", file_name, str(e)), @@ -289,7 +269,7 @@ class CuraContainerRegistry(ContainerRegistry): elif profile_index < len(machine_extruders) + 1: # This is assumed to be an extruder profile - extruder_id = Application.getInstance().getMachineManager().getQualityDefinitionId(machine_extruders[profile_index - 1].getBottom()) + extruder_id = machine_extruders[profile_index - 1].definition.getId() if not profile.getMetaDataEntry("extruder"): profile.addMetaDataEntry("extruder", extruder_id) else: @@ -348,39 +328,16 @@ class CuraContainerRegistry(ContainerRegistry): return catalog.i18nc("@info:status", "Profile is missing a quality type.") quality_type_criteria = {"quality_type": quality_type} - if self._machineHasOwnQualities(): - profile.setDefinition(self._activeQualityDefinition().getId()) - if self._machineHasOwnMaterials(): - active_material_id = self._activeMaterialId() - if active_material_id and active_material_id != "empty": # only update if there is an active material - profile.addMetaDataEntry("material", active_material_id) - quality_type_criteria["material"] = active_material_id - - quality_type_criteria["definition"] = profile.getDefinition().getId() - - else: - profile.setDefinition("fdmprinter") - quality_type_criteria["definition"] = "fdmprinter" - - machine_definition = Application.getInstance().getGlobalContainerStack().getBottom() - del quality_type_criteria["definition"] - - # materials = None - - if "material" in quality_type_criteria: - # materials = ContainerRegistry.getInstance().findInstanceContainers(id = quality_type_criteria["material"]) - del quality_type_criteria["material"] - - # Do not filter quality containers here with materials because we are trying to import a profile, so it should - # NOT be restricted by the active materials on the current machine. - materials = None + global_stack = Application.getInstance().getGlobalContainerStack() + definition_id = getMachineDefinitionIDForQualitySearch(global_stack) + profile.setDefinition(definition_id) # Check to make sure the imported profile actually makes sense in context of the current configuration. # This prevents issues where importing a "draft" profile for a machine without "draft" qualities would report as # successfully imported but then fail to show up. - from cura.QualityManager import QualityManager - qualities = QualityManager.getInstance()._getFilteredContainersForStack(machine_definition, materials, **quality_type_criteria) - if not qualities: + quality_manager = CuraApplication.getInstance()._quality_manager + quality_group_dict = quality_manager.getQualityGroupsForMachineDefinition(global_stack) + if quality_type not in quality_group_dict: return catalog.i18nc("@info:status", "Could not find a quality type {0} for the current configuration.", quality_type) ContainerRegistry.getInstance().addContainer(profile) @@ -400,18 +357,6 @@ class CuraContainerRegistry(ContainerRegistry): result.append( (plugin_id, meta_data) ) return result - ## Get the definition to use to select quality profiles for the active machine - # \return the active quality definition object or None if there is no quality definition - def _activeQualityDefinition(self): - global_container_stack = Application.getInstance().getGlobalContainerStack() - if global_container_stack: - definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(global_container_stack.getBottom()) - definition = self.findDefinitionContainers(id = definition_id)[0] - - if definition: - return definition - return None - ## Returns true if the current machine requires its own materials # \return True if the current machine requires its own materials def _machineHasOwnMaterials(self): @@ -507,8 +452,6 @@ class CuraContainerRegistry(ContainerRegistry): extruder_stack.setDefinition(extruder_definition) extruder_stack.addMetaDataEntry("position", extruder_definition.getMetaDataEntry("position")) - from cura.CuraApplication import CuraApplication - # create a new definition_changes container for the extruder stack definition_changes_id = self.uniqueName(extruder_stack.getId() + "_settings") if create_new_ids else extruder_stack.getId() + "_settings" definition_changes_name = definition_changes_id @@ -567,26 +510,28 @@ class CuraContainerRegistry(ContainerRegistry): self.addContainer(user_container) extruder_stack.setUserChanges(user_container) - variant_id = "default" + application = CuraApplication.getInstance() + empty_variant = application.empty_variant_container + empty_material = application.empty_material_container + empty_quality = application.empty_quality_container + if machine.variant.getId() not in ("empty", "empty_variant"): - variant_id = machine.variant.getId() + variant = machine.variant else: - variant_id = "empty_variant" - extruder_stack.setVariantById(variant_id) + variant = empty_variant + extruder_stack.variant = variant - material_id = "default" if machine.material.getId() not in ("empty", "empty_material"): - material_id = machine.material.getId() + material = machine.material else: - material_id = "empty_material" - extruder_stack.setMaterialById(material_id) + material = empty_material + extruder_stack.material = material - quality_id = "default" if machine.quality.getId() not in ("empty", "empty_quality"): - quality_id = machine.quality.getId() + quality = machine.quality else: - quality_id = "empty_quality" - extruder_stack.setQualityById(quality_id) + quality = empty_quality + extruder_stack.quality = quality machine_quality_changes = machine.qualityChanges if new_global_quality_changes is not None: @@ -598,7 +543,7 @@ class CuraContainerRegistry(ContainerRegistry): extruder_quality_changes_container = extruder_quality_changes_container[0] quality_changes_id = extruder_quality_changes_container.getId() - extruder_stack.setQualityChangesById(quality_changes_id) + extruder_stack.qualityChanges = self.findInstanceContainers(id = quality_changes_id)[0] else: # Some extruder quality_changes containers can be created at runtime as files in the qualities # folder. Those files won't be loaded in the registry immediately. So we also need to search @@ -607,7 +552,7 @@ class CuraContainerRegistry(ContainerRegistry): if extruder_quality_changes_container: quality_changes_id = extruder_quality_changes_container.getId() extruder_quality_changes_container.addMetaDataEntry("extruder", extruder_stack.definition.getId()) - extruder_stack.setQualityChangesById(quality_changes_id) + extruder_stack.qualityChanges = self.findInstanceContainers(id = quality_changes_id)[0] else: # if we still cannot find a quality changes container for the extruder, create a new one container_name = machine_quality_changes.getName() @@ -642,7 +587,7 @@ class CuraContainerRegistry(ContainerRegistry): machine_quality_changes.removeInstance(qc_setting_key, postpone_emit=True) else: - extruder_stack.setQualityChangesById("empty_quality_changes") + extruder_stack.qualityChanges = self.findInstanceContainers(id = "empty_quality_changes")[0] self.addContainer(extruder_stack) diff --git a/cura/Settings/CuraContainerStack.py b/cura/Settings/CuraContainerStack.py index b97bb3314e..00db4f57c7 100755 --- a/cura/Settings/CuraContainerStack.py +++ b/cura/Settings/CuraContainerStack.py @@ -83,20 +83,6 @@ class CuraContainerStack(ContainerStack): def setQualityChanges(self, new_quality_changes: InstanceContainer, postpone_emit = False) -> None: self.replaceContainer(_ContainerIndexes.QualityChanges, new_quality_changes, postpone_emit = postpone_emit) - ## Set the quality changes container by an ID. - # - # This will search for the specified container and set it. If no container was found, an error will be raised. - # - # \param new_quality_changes_id The ID of the new quality changes container. - # - # \throws Exceptions.InvalidContainerError Raised when no container could be found with the specified ID. - def setQualityChangesById(self, new_quality_changes_id: str) -> None: - quality_changes = ContainerRegistry.getInstance().findInstanceContainers(id = new_quality_changes_id) - if quality_changes: - self.setQualityChanges(quality_changes[0]) - else: - raise Exceptions.InvalidContainerError("Could not find container with id {id}".format(id = new_quality_changes_id)) - ## Get the quality changes container. # # \return The quality changes container. Should always be a valid container, but can be equal to the empty InstanceContainer. @@ -110,31 +96,6 @@ class CuraContainerStack(ContainerStack): def setQuality(self, new_quality: InstanceContainer, postpone_emit = False) -> None: self.replaceContainer(_ContainerIndexes.Quality, new_quality, postpone_emit = postpone_emit) - ## Set the quality container by an ID. - # - # This will search for the specified container and set it. If no container was found, an error will be raised. - # There is a special value for ID, which is "default". The "default" value indicates the quality should be set - # to whatever the machine definition specifies as "preferred" container, or a fallback value. See findDefaultQuality - # for details. - # - # \param new_quality_id The ID of the new quality container. - # - # \throws Exceptions.InvalidContainerError Raised when no container could be found with the specified ID. - def setQualityById(self, new_quality_id: str) -> None: - quality = self._empty_quality - if new_quality_id == "default": - new_quality = self.findDefaultQuality() - if new_quality: - quality = new_quality - else: - qualities = ContainerRegistry.getInstance().findInstanceContainers(id = new_quality_id) - if qualities: - quality = qualities[0] - else: - raise Exceptions.InvalidContainerError("Could not find container with id {id}".format(id = new_quality_id)) - - self.setQuality(quality) - ## Get the quality container. # # \return The quality container. Should always be a valid container, but can be equal to the empty InstanceContainer. @@ -148,31 +109,6 @@ class CuraContainerStack(ContainerStack): def setMaterial(self, new_material: InstanceContainer, postpone_emit = False) -> None: self.replaceContainer(_ContainerIndexes.Material, new_material, postpone_emit = postpone_emit) - ## Set the material container by an ID. - # - # This will search for the specified container and set it. If no container was found, an error will be raised. - # There is a special value for ID, which is "default". The "default" value indicates the quality should be set - # to whatever the machine definition specifies as "preferred" container, or a fallback value. See findDefaultMaterial - # for details. - # - # \param new_material_id The ID of the new material container. - # - # \throws Exceptions.InvalidContainerError Raised when no container could be found with the specified ID. - def setMaterialById(self, new_material_id: str) -> None: - material = self._empty_material - if new_material_id == "default": - new_material = self.findDefaultMaterial() - if new_material: - material = new_material - else: - materials = ContainerRegistry.getInstance().findInstanceContainers(id = new_material_id) - if materials: - material = materials[0] - else: - raise Exceptions.InvalidContainerError("Could not find container with id {id}".format(id = new_material_id)) - - self.setMaterial(material) - ## Get the material container. # # \return The material container. Should always be a valid container, but can be equal to the empty InstanceContainer. @@ -186,31 +122,6 @@ class CuraContainerStack(ContainerStack): def setVariant(self, new_variant: InstanceContainer) -> None: self.replaceContainer(_ContainerIndexes.Variant, new_variant) - ## Set the variant container by an ID. - # - # This will search for the specified container and set it. If no container was found, an error will be raised. - # There is a special value for ID, which is "default". The "default" value indicates the quality should be set - # to whatever the machine definition specifies as "preferred" container, or a fallback value. See findDefaultVariant - # for details. - # - # \param new_variant_id The ID of the new variant container. - # - # \throws Exceptions.InvalidContainerError Raised when no container could be found with the specified ID. - def setVariantById(self, new_variant_id: str) -> None: - variant = self._empty_variant - if new_variant_id == "default": - new_variant = self.findDefaultVariantBuildplate() if self.getMetaDataEntry("type") == "machine" else self.findDefaultVariant() - if new_variant: - variant = new_variant - else: - variants = ContainerRegistry.getInstance().findInstanceContainers(id = new_variant_id) - if variants: - variant = variants[0] - else: - raise Exceptions.InvalidContainerError("Could not find container with id {id}".format(id = new_variant_id)) - - self.setVariant(variant) - ## Get the variant container. # # \return The variant container. Should always be a valid container, but can be equal to the empty InstanceContainer. @@ -224,18 +135,6 @@ class CuraContainerStack(ContainerStack): def setDefinitionChanges(self, new_definition_changes: InstanceContainer) -> None: self.replaceContainer(_ContainerIndexes.DefinitionChanges, new_definition_changes) - ## Set the definition changes container by an ID. - # - # \param new_definition_changes_id The ID of the new definition changes container. - # - # \throws Exceptions.InvalidContainerError Raised when no container could be found with the specified ID. - def setDefinitionChangesById(self, new_definition_changes_id: str) -> None: - new_definition_changes = ContainerRegistry.getInstance().findInstanceContainers(id = new_definition_changes_id) - if new_definition_changes: - self.setDefinitionChanges(new_definition_changes[0]) - else: - raise Exceptions.InvalidContainerError("Could not find container with id {id}".format(id = new_definition_changes_id)) - ## Get the definition changes container. # # \return The definition changes container. Should always be a valid container, but can be equal to the empty InstanceContainer. @@ -249,18 +148,6 @@ class CuraContainerStack(ContainerStack): def setDefinition(self, new_definition: DefinitionContainerInterface) -> None: self.replaceContainer(_ContainerIndexes.Definition, new_definition) - ## Set the definition container by an ID. - # - # \param new_definition_id The ID of the new definition container. - # - # \throws Exceptions.InvalidContainerError Raised when no container could be found with the specified ID. - def setDefinitionById(self, new_definition_id: str) -> None: - new_definition = ContainerRegistry.getInstance().findDefinitionContainers(id = new_definition_id) - if new_definition: - self.setDefinition(new_definition[0]) - else: - raise Exceptions.InvalidContainerError("Could not find container with id {id}".format(id = new_definition_id)) - ## Get the definition container. # # \return The definition container. Should always be a valid container, but can be equal to the empty InstanceContainer. @@ -348,6 +235,10 @@ class CuraContainerStack(ContainerStack): elif container != self._empty_instance_container and container.getMetaDataEntry("type") != expected_type: raise Exceptions.InvalidContainerError("Cannot replace container at index {index} with a container that is not of {type} type, but {actual_type} type.".format(index = index, type = expected_type, actual_type = container.getMetaDataEntry("type"))) + current_container = self._containers[index] + if current_container.getId() == container.getId(): + return + super().replaceContainer(index, container, postpone_emit) ## Overridden from ContainerStack @@ -391,243 +282,6 @@ class CuraContainerStack(ContainerStack): self._containers = new_containers - ## Find the variant that should be used as "default" variant. - # - # This will search for variants that match the current definition and pick the preferred one, - # if specified by the machine definition. - # - # The following criteria are used to find the default variant: - # - If the machine definition does not have a metadata entry "has_variants" set to True, return None - # - The definition of the variant should be the same as the machine definition for this stack. - # - The container should have a metadata entry "type" with value "variant". - # - If the machine definition has a metadata entry "preferred_variant", filter the variant IDs based on that. - # - # \return The container that should be used as default, or None if nothing was found or the machine does not use variants. - # - # \note This method assumes the stack has a valid machine definition. - def findDefaultVariant(self) -> Optional[ContainerInterface]: - definition = self._getMachineDefinition() - # has_variants can be overridden in other containers and stacks. - # In the case of UM2, it is overridden in the GlobalStack - if not self.getMetaDataEntry("has_variants"): - # If the machine does not use variants, we should never set a variant. - return None - - # First add any variant. Later, overwrite with preference if the preference is valid. - variant = None - definition_id = self._findInstanceContainerDefinitionId(definition) - variants = ContainerRegistry.getInstance().findInstanceContainers(definition = definition_id, type = "variant") - if variants: - variant = variants[0] - - preferred_variant_id = definition.getMetaDataEntry("preferred_variant") - if preferred_variant_id: - preferred_variants = ContainerRegistry.getInstance().findInstanceContainers(id = preferred_variant_id, definition = definition_id, type = "variant") - if preferred_variants: - variant = preferred_variants[0] - else: - Logger.log("w", "The preferred variant \"{variant}\" of stack {stack} does not exist or is not a variant.", variant = preferred_variant_id, stack = self.id) - # And leave it at the default variant. - - if variant: - return variant - - Logger.log("w", "Could not find a valid default variant for stack {stack}", stack = self.id) - return None - - ## Find the global variant that should be used as "default". This is used for the buildplates. - # - # This will search for variants that match the current definition and pick the preferred one, - # if specified by the machine definition. - # - # The following criteria are used to find the default global variant: - # - If the machine definition does not have a metadata entry "has_variant_buildplates" set to True, return None - # - The definition of the variant should be the same as the machine definition for this stack. - # - The container should have a metadata entry "type" with value "variant" and "hardware_type" with value "buildplate". - # - If the machine definition has a metadata entry "preferred_variant_buildplate", filter the variant IDs based on that. - # - # \return The container that should be used as default, or None if nothing was found or the machine does not use variants. - # - # \note This method assumes the stack has a valid machine definition. - def findDefaultVariantBuildplate(self) -> Optional[ContainerInterface]: - definition = self._getMachineDefinition() - # has_variant_buildplates can be overridden in other containers and stacks. - # In the case of UM2, it is overridden in the GlobalStack - if not self.getMetaDataEntry("has_variant_buildplates"): - # If the machine does not use variants, we should never set a variant. - return None - - # First add any variant. Later, overwrite with preference if the preference is valid. - variant = None - definition_id = self._findInstanceContainerDefinitionId(definition) - variants = ContainerRegistry.getInstance().findInstanceContainers(definition = definition_id, type = "variant", hardware_type = "buildplate") - if variants: - variant = variants[0] - - preferred_variant_buildplate_id = definition.getMetaDataEntry("preferred_variant_buildplate") - if preferred_variant_buildplate_id: - preferred_variant_buildplates = ContainerRegistry.getInstance().findInstanceContainers(id = preferred_variant_buildplate_id, definition = definition_id, type = "variant") - if preferred_variant_buildplates: - variant = preferred_variant_buildplates[0] - else: - Logger.log("w", "The preferred variant buildplate \"{variant}\" of stack {stack} does not exist or is not a variant.", - variant = preferred_variant_buildplate_id, stack = self.id) - # And leave it at the default variant. - - if variant: - return variant - - Logger.log("w", "Could not find a valid default buildplate variant for stack {stack}", stack = self.id) - return None - - ## Find the material that should be used as "default" material. - # - # This will search for materials that match the current definition and pick the preferred one, - # if specified by the machine definition. - # - # The following criteria are used to find the default material: - # - If the machine definition does not have a metadata entry "has_materials" set to True, return None - # - If the machine definition has a metadata entry "has_machine_materials", the definition of the material should - # be the same as the machine definition for this stack. Otherwise, the definition should be "fdmprinter". - # - The container should have a metadata entry "type" with value "material". - # - The material should have an approximate diameter that matches the machine - # - If the machine definition has a metadata entry "has_variants" and set to True, the "variant" metadata entry of - # the material should be the same as the ID of the variant in the stack. Only applies if "has_machine_materials" is also True. - # - If the stack currently has a material set, try to find a material that matches the current material by name. - # - Otherwise, if the machine definition has a metadata entry "preferred_material", try to find a material that matches the specified ID. - # - # \return The container that should be used as default, or None if nothing was found or the machine does not use materials. - def findDefaultMaterial(self) -> Optional[ContainerInterface]: - definition = self._getMachineDefinition() - if not definition.getMetaDataEntry("has_materials"): - # Machine does not use materials, never try to set it. - return None - - search_criteria = {"type": "material"} - if definition.getMetaDataEntry("has_machine_materials"): - search_criteria["definition"] = self._findInstanceContainerDefinitionId(definition) - - if definition.getMetaDataEntry("has_variants"): - search_criteria["variant"] = self.variant.id - else: - search_criteria["definition"] = "fdmprinter" - - if self.material != self._empty_material: - search_criteria["name"] = self.material.name - else: - preferred_material = definition.getMetaDataEntry("preferred_material") - if preferred_material: - search_criteria["id"] = preferred_material - - approximate_material_diameter = str(round(self.getProperty("material_diameter", "value"))) - search_criteria["approximate_diameter"] = approximate_material_diameter - - materials = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria) - if not materials: - Logger.log("w", "The preferred material \"{material}\" could not be found for stack {stack}", material = preferred_material, stack = self.id) - # We failed to find any materials matching the specified criteria, drop some specific criteria and try to find - # a material that sort-of matches what we want. - search_criteria.pop("variant", None) - search_criteria.pop("id", None) - search_criteria.pop("name", None) - materials = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria) - - if not materials: - Logger.log("w", "Could not find a valid material for stack {stack}", stack = self.id) - return None - - for material in materials: - # Prefer a read-only material - if ContainerRegistry.getInstance().isReadOnly(material.getId()): - return material - - return materials[0] - - - ## Find the quality that should be used as "default" quality. - # - # This will search for qualities that match the current definition and pick the preferred one, - # if specified by the machine definition. - # - # \return The container that should be used as default, or None if nothing was found. - def findDefaultQuality(self) -> Optional[ContainerInterface]: - definition = self._getMachineDefinition() - registry = ContainerRegistry.getInstance() - material_container = self.material if self.material.getId() not in (self._empty_material.getId(), self._empty_instance_container.getId()) else None - - search_criteria = {"type": "quality"} - - if definition.getMetaDataEntry("has_machine_quality"): - search_criteria["definition"] = self._findInstanceContainerDefinitionId(definition) - - if definition.getMetaDataEntry("has_materials") and material_container: - search_criteria["material"] = material_container.id - else: - search_criteria["definition"] = "fdmprinter" - - if self.quality != self._empty_quality: - search_criteria["name"] = self.quality.name - else: - preferred_quality = definition.getMetaDataEntry("preferred_quality") - if preferred_quality: - search_criteria["id"] = preferred_quality - - containers = registry.findInstanceContainers(**search_criteria) - if containers: - return containers[0] - - if "material" in search_criteria: - # First check if we can solve our material not found problem by checking if we can find quality containers - # that are assigned to the parents of this material profile. - try: - inherited_files = material_container.getInheritedFiles() - except AttributeError: # Material_container does not support inheritance. - inherited_files = [] - - if inherited_files: - for inherited_file in inherited_files: - # Extract the ID from the path we used to load the file. - search_criteria["material"] = os.path.basename(inherited_file).split(".")[0] - containers = registry.findInstanceContainers(**search_criteria) - if containers: - return containers[0] - - # We still weren't able to find a quality for this specific material. - # Try to find qualities for a generic version of the material. - material_search_criteria = {"type": "material", "material": material_container.getMetaDataEntry("material"), "color_name": "Generic"} - if definition.getMetaDataEntry("has_machine_quality"): - if self.material != self._empty_instance_container: - material_search_criteria["definition"] = material_container.getMetaDataEntry("definition") - - if definition.getMetaDataEntry("has_variants"): - material_search_criteria["variant"] = material_container.getMetaDataEntry("variant") - else: - material_search_criteria["definition"] = self._findInstanceContainerDefinitionId(definition) - - if definition.getMetaDataEntry("has_variants") and self.variant != self._empty_instance_container: - material_search_criteria["variant"] = self.variant.id - else: - material_search_criteria["definition"] = "fdmprinter" - material_containers = registry.findInstanceContainersMetadata(**material_search_criteria) - # Try all materials to see if there is a quality profile available. - for material_container in material_containers: - search_criteria["material"] = material_container["id"] - - containers = registry.findInstanceContainers(**search_criteria) - if containers: - return containers[0] - - if "name" in search_criteria or "id" in search_criteria: - # If a quality by this name can not be found, try a wider set of search criteria - search_criteria.pop("name", None) - search_criteria.pop("id", None) - - containers = registry.findInstanceContainers(**search_criteria) - if containers: - return containers[0] - - return None - ## protected: # Helper to make sure we emit a PyQt signal on container changes. diff --git a/cura/Settings/CuraStackBuilder.py b/cura/Settings/CuraStackBuilder.py index 608a13c600..a8234b9de9 100644 --- a/cura/Settings/CuraStackBuilder.py +++ b/cura/Settings/CuraStackBuilder.py @@ -1,15 +1,18 @@ -# Copyright (c) 2017 Ultimaker B.V. +# Copyright (c) 2018 Ultimaker B.V. # Cura is released under the terms of the LGPLv3 or higher. -from UM.Logger import Logger +from typing import Optional +from UM.Logger import Logger from UM.Settings.Interfaces import DefinitionContainerInterface from UM.Settings.InstanceContainer import InstanceContainer from UM.Settings.ContainerRegistry import ContainerRegistry +from UM.Settings.SettingFunction import SettingFunction +from UM.Util import parseBool +from cura.Machines.VariantManager import VariantType from .GlobalStack import GlobalStack from .ExtruderStack import ExtruderStack -from typing import Optional ## Contains helper functions to create new machines. @@ -22,7 +25,13 @@ class CuraStackBuilder: # \return The new global stack or None if an error occurred. @classmethod def createMachine(cls, name: str, definition_id: str) -> Optional[GlobalStack]: + from cura.CuraApplication import CuraApplication + application = CuraApplication.getInstance() + variant_manager = application.getVariantManager() + material_manager = application.getMaterialManager() + quality_manager = application.getQualityManager() registry = ContainerRegistry.getInstance() + definitions = registry.findDefinitionContainers(id = definition_id) if not definitions: Logger.log("w", "Definition {definition} was not found!", definition = definition_id) @@ -30,7 +39,21 @@ class CuraStackBuilder: machine_definition = definitions[0] - generated_name = registry.createUniqueName("machine", "", name, machine_definition.name) + # get variant container for the global stack + global_variant_container = application.empty_variant_container + global_variant_node = variant_manager.getDefaultVariantNode(machine_definition, VariantType.BUILD_PLATE) + if global_variant_node: + global_variant_container = global_variant_node.getContainer() + + # get variant container for extruders + extruder_variant_container = application.empty_variant_container + extruder_variant_node = variant_manager.getDefaultVariantNode(machine_definition, VariantType.NOZZLE) + extruder_variant_name = None + if extruder_variant_node: + extruder_variant_container = extruder_variant_node.getContainer() + extruder_variant_name = extruder_variant_container.getName() + + generated_name = registry.createUniqueName("machine", "", name, machine_definition.getName()) # Make sure the new name does not collide with any definition or (quality) profile # createUniqueName() only looks at other stacks, but not at definitions or quality profiles # Note that we don't go for uniqueName() immediately because that function matches with ignore_case set to true @@ -40,49 +63,55 @@ class CuraStackBuilder: new_global_stack = cls.createGlobalStack( new_stack_id = generated_name, definition = machine_definition, - quality = "default", - material = "default", - variant = "default", + variant_container = global_variant_container, + material_container = application.empty_material_container, + quality_container = application.empty_quality_container, ) - new_global_stack.setName(generated_name) - extruder_definition = registry.findDefinitionContainers(machine = machine_definition.getId()) + # get material container for extruders + material_container = application.empty_material_container + material_node = material_manager.getDefaultMaterial(new_global_stack, extruder_variant_name) + if material_node: + material_container = material_node.getContainer() - if not extruder_definition: - # create extruder stack for single extrusion machines that have no separate extruder definition files - extruder_definition = registry.findDefinitionContainers(id = "fdmextruder")[0] - new_extruder_id = registry.uniqueName(machine_definition.getName() + " " + extruder_definition.id) + # Create ExtruderStacks + extruder_dict = machine_definition.getMetaDataEntry("machine_extruder_trains") + + for position, extruder_definition_id in extruder_dict.items(): + # Sanity check: make sure that the positions in the extruder definitions are same as in the machine + # definition + extruder_definition = registry.findDefinitionContainers(id = extruder_definition_id)[0] + position_in_extruder_def = extruder_definition.getMetaDataEntry("position") + if position_in_extruder_def != position: + raise RuntimeError("Extruder position [%s] defined in extruder definition [%s] is not the same as in machine definition [%s] position [%s]" % + (position_in_extruder_def, extruder_definition_id, definition_id, position)) + + new_extruder_id = registry.uniqueName(extruder_definition_id) new_extruder = cls.createExtruderStack( new_extruder_id, - definition = extruder_definition, - machine_definition_id = machine_definition.getId(), - quality = "default", - material = "default", - variant = "default", - next_stack = new_global_stack + extruder_definition = extruder_definition, + machine_definition_id = definition_id, + position = position, + variant_container = extruder_variant_container, + material_container = material_container, + quality_container = application.empty_quality_container, + global_stack = new_global_stack, ) + new_extruder.setNextStack(new_global_stack) new_global_stack.addExtruder(new_extruder) registry.addContainer(new_extruder) - else: - # create extruder stack for each found extruder definition - for extruder_definition in registry.findDefinitionContainers(machine = machine_definition.id): - position = extruder_definition.getMetaDataEntry("position", None) - if not position: - Logger.log("w", "Extruder definition %s specifies no position metadata entry.", extruder_definition.id) - new_extruder_id = registry.uniqueName(extruder_definition.id) - new_extruder = cls.createExtruderStack( - new_extruder_id, - definition = extruder_definition, - machine_definition_id = machine_definition.getId(), - quality = "default", - material = "default", - variant = "default", - next_stack = new_global_stack - ) - new_global_stack.addExtruder(new_extruder) - registry.addContainer(new_extruder) + preferred_quality_type = machine_definition.getMetaDataEntry("preferred_quality_type") + quality_group_dict = quality_manager.getQualityGroups(new_global_stack) + quality_group = quality_group_dict.get(preferred_quality_type) + + new_global_stack.quality = quality_group.node_for_global.getContainer() + for position, extruder_stack in new_global_stack.extruders.items(): + if position in quality_group.nodes_for_extruders: + extruder_stack.quality = quality_group.nodes_for_extruders[position].getContainer() + else: + extruder_stack.quality = application.empty_quality_container # Register the global stack after the extruder stacks are created. This prevents the registry from adding another # extruder stack because the global stack didn't have one yet (which is enforced since Cura 3.1). @@ -100,43 +129,27 @@ class CuraStackBuilder: # # \return A new Global stack instance with the specified parameters. @classmethod - def createExtruderStack(cls, new_stack_id: str, definition: DefinitionContainerInterface, machine_definition_id: str, **kwargs) -> ExtruderStack: - stack = ExtruderStack(new_stack_id) - stack.setName(definition.getName()) - stack.setDefinition(definition) - stack.addMetaDataEntry("position", definition.getMetaDataEntry("position")) - - if "next_stack" in kwargs: - # Add stacks before containers are added, since they may trigger a setting update. - stack.setNextStack(kwargs["next_stack"]) - - user_container = InstanceContainer(new_stack_id + "_user") - user_container.addMetaDataEntry("type", "user") - user_container.addMetaDataEntry("extruder", new_stack_id) + def createExtruderStack(cls, new_stack_id: str, extruder_definition: DefinitionContainerInterface, machine_definition_id: str, + position: int, + variant_container, material_container, quality_container, global_stack) -> ExtruderStack: from cura.CuraApplication import CuraApplication - user_container.addMetaDataEntry("setting_version", CuraApplication.SettingVersion) - user_container.setDefinition(machine_definition_id) + application = CuraApplication.getInstance() - stack.setUserChanges(user_container) + stack = ExtruderStack(new_stack_id, parent = global_stack) + stack.setName(extruder_definition.getName()) + stack.setDefinition(extruder_definition) - # Important! The order here matters, because that allows the stack to - # assume the material and variant have already been set. - if "definition_changes" in kwargs: - stack.setDefinitionChangesById(kwargs["definition_changes"]) - else: - stack.setDefinitionChanges(cls.createDefinitionChangesContainer(stack, new_stack_id + "_settings")) + stack.addMetaDataEntry("position", position) - if "variant" in kwargs: - stack.setVariantById(kwargs["variant"]) + user_container = cls.createUserChangesContainer(new_stack_id + "_user", machine_definition_id, new_stack_id, + is_global_stack = False) - if "material" in kwargs: - stack.setMaterialById(kwargs["material"]) - - if "quality" in kwargs: - stack.setQualityById(kwargs["quality"]) - - if "quality_changes" in kwargs: - stack.setQualityChangesById(kwargs["quality_changes"]) + stack.definitionChanges = cls.createDefinitionChangesContainer(stack, new_stack_id + "_settings") + stack.variant = variant_container + stack.material = material_container + stack.quality = quality_container + stack.qualityChanges = application.empty_quality_changes_container + stack.userChanges = user_container # Only add the created containers to the registry after we have set all the other # properties. This makes the create operation more transactional, since any problems @@ -153,44 +166,48 @@ class CuraStackBuilder: # # \return A new Global stack instance with the specified parameters. @classmethod - def createGlobalStack(cls, new_stack_id: str, definition: DefinitionContainerInterface, **kwargs) -> GlobalStack: + def createGlobalStack(cls, new_stack_id: str, definition: DefinitionContainerInterface, + variant_container, material_container, quality_container) -> GlobalStack: + from cura.CuraApplication import CuraApplication + application = CuraApplication.getInstance() + stack = GlobalStack(new_stack_id) stack.setDefinition(definition) - user_container = InstanceContainer(new_stack_id + "_user") - user_container.addMetaDataEntry("type", "user") - user_container.addMetaDataEntry("machine", new_stack_id) - from cura.CuraApplication import CuraApplication - user_container.addMetaDataEntry("setting_version", CuraApplication.SettingVersion) - user_container.setDefinition(definition.getId()) + # Create user container + user_container = cls.createUserChangesContainer(new_stack_id + "_user", definition.getId(), new_stack_id, + is_global_stack = True) - stack.setUserChanges(user_container) - - # Important! The order here matters, because that allows the stack to - # assume the material and variant have already been set. - if "definition_changes" in kwargs: - stack.setDefinitionChangesById(kwargs["definition_changes"]) - else: - stack.setDefinitionChanges(cls.createDefinitionChangesContainer(stack, new_stack_id + "_settings")) - - if "variant" in kwargs: - stack.setVariantById(kwargs["variant"]) - - if "material" in kwargs: - stack.setMaterialById(kwargs["material"]) - - if "quality" in kwargs: - stack.setQualityById(kwargs["quality"]) - - if "quality_changes" in kwargs: - stack.setQualityChangesById(kwargs["quality_changes"]) + stack.definitionChanges = cls.createDefinitionChangesContainer(stack, new_stack_id + "_settings") + stack.variant = variant_container + stack.material = material_container + stack.quality = quality_container + stack.qualityChanges = application.empty_quality_changes_container + stack.userChanges = user_container ContainerRegistry.getInstance().addContainer(user_container) return stack @classmethod - def createDefinitionChangesContainer(cls, container_stack, container_name, container_index = None): + def createUserChangesContainer(cls, container_name: str, definition_id: str, stack_id: str, + is_global_stack: bool) -> "InstanceContainer": + from cura.CuraApplication import CuraApplication + + unique_container_name = ContainerRegistry.getInstance().uniqueName(container_name) + + container = InstanceContainer(unique_container_name) + container.setDefinition(definition_id) + container.addMetaDataEntry("type", "user") + container.addMetaDataEntry("setting_version", CuraApplication.SettingVersion) + + metadata_key_to_add = "machine" if is_global_stack else "extruder" + container.addMetaDataEntry(metadata_key_to_add, stack_id) + + return container + + @classmethod + def createDefinitionChangesContainer(cls, container_stack, container_name): from cura.CuraApplication import CuraApplication unique_container_name = ContainerRegistry.getInstance().uniqueName(container_name) diff --git a/cura/Settings/ExtruderManager.py b/cura/Settings/ExtruderManager.py index 35b5b1320b..06342b68e5 100755 --- a/cura/Settings/ExtruderManager.py +++ b/cura/Settings/ExtruderManager.py @@ -12,6 +12,7 @@ from UM.Scene.Selection import Selection from UM.Scene.Iterator.BreadthFirstIterator import BreadthFirstIterator from UM.Settings.ContainerRegistry import ContainerRegistry # Finding containers by ID. from UM.Settings.SettingFunction import SettingFunction +from UM.Settings.SettingInstance import SettingInstance from UM.Settings.ContainerStack import ContainerStack from UM.Settings.PropertyEvaluationContext import PropertyEvaluationContext from typing import Optional, List, TYPE_CHECKING, Union @@ -30,28 +31,22 @@ class ExtruderManager(QObject): def __init__(self, parent = None): super().__init__(parent) + self._application = Application.getInstance() + self._extruder_trains = {} # Per machine, a dictionary of extruder container stack IDs. Only for separately defined extruders. self._active_extruder_index = -1 # Indicates the index of the active extruder stack. -1 means no active extruder stack self._selected_object_extruders = [] - self._global_container_stack_definition_id = None self._addCurrentMachineExtruders() - Application.getInstance().globalContainerStackChanged.connect(self.__globalContainerStackChanged) + #Application.getInstance().globalContainerStackChanged.connect(self._globalContainerStackChanged) Selection.selectionChanged.connect(self.resetSelectedObjectExtruders) ## Signal to notify other components when the list of extruders for a machine definition changes. extrudersChanged = pyqtSignal(QVariant) - ## Signal to notify other components when the global container stack is switched to a definition - # that has different extruders than the previous global container stack - globalContainerStackDefinitionChanged = pyqtSignal() - ## Notify when the user switches the currently active extruder. activeExtruderChanged = pyqtSignal() - ## The signal notifies subscribers if extruders are added - extrudersAdded = pyqtSignal() - ## Gets the unique identifier of the currently active extruder stack. # # The currently active extruder stack is the stack that is currently being @@ -184,6 +179,7 @@ class ExtruderManager(QObject): self._selected_object_extruders = [] self.selectedObjectExtrudersChanged.emit() + @pyqtSlot(result = QObject) def getActiveExtruderStack(self) -> Optional["ExtruderStack"]: global_container_stack = Application.getInstance().getGlobalContainerStack() @@ -371,12 +367,7 @@ class ExtruderManager(QObject): return result[:machine_extruder_count] - def __globalContainerStackChanged(self) -> None: - global_container_stack = Application.getInstance().getGlobalContainerStack() - if global_container_stack and global_container_stack.getBottom() and global_container_stack.getBottom().getId() != self._global_container_stack_definition_id: - self._global_container_stack_definition_id = global_container_stack.getBottom().getId() - self.globalContainerStackDefinitionChanged.emit() - + def _globalContainerStackChanged(self) -> None: # If the global container changed, the machine changed and might have extruders that were not registered yet self._addCurrentMachineExtruders() @@ -384,7 +375,7 @@ class ExtruderManager(QObject): ## Adds the extruders of the currently active machine. def _addCurrentMachineExtruders(self) -> None: - global_stack = Application.getInstance().getGlobalContainerStack() + global_stack = self._application.getGlobalContainerStack() extruders_changed = False if global_stack: @@ -404,20 +395,82 @@ class ExtruderManager(QObject): self._extruder_trains[global_stack_id][extruder_train.getMetaDataEntry("position")] = extruder_train # regardless of what the next stack is, we have to set it again, because of signal routing. ??? + extruder_train.setParent(global_stack) extruder_train.setNextStack(global_stack) extruders_changed = True - # FIX: We have to remove those settings here because we know that those values have been copied to all - # the extruders at this point. - for key in ("material_diameter", "machine_nozzle_size"): - if global_stack.definitionChanges.hasProperty(key, "value"): - global_stack.definitionChanges.removeInstance(key, postpone_emit = True) - + self._fixMaterialDiameterAndNozzleSize(global_stack, extruder_trains) if extruders_changed: self.extrudersChanged.emit(global_stack_id) - self.extrudersAdded.emit() self.setActiveExtruderIndex(0) + # + # This function tries to fix the problem with per-extruder-settable nozzle size and material diameter problems + # in early versions (3.0 - 3.2.1). + # + # In earlier versions, "nozzle size" and "material diameter" are only applicable to the complete machine, so all + # extruders share the same values. In this case, "nozzle size" and "material diameter" are saved in the + # GlobalStack's DefinitionChanges container. + # + # Later, we could have different "nozzle size" for each extruder, but "material diameter" could only be set for + # the entire machine. In this case, "nozzle size" should be saved in each ExtruderStack's DefinitionChanges, but + # "material diameter" still remains in the GlobalStack's DefinitionChanges. + # + # Lateer, both "nozzle size" and "material diameter" are settable per-extruder, and both settings should be saved + # in the ExtruderStack's DefinitionChanges. + # + # There were some bugs in upgrade so the data weren't saved correct as described above. This function tries fix + # this. + # + # One more thing is about material diameter and single-extrusion machines. Most single-extrusion machines don't + # specifically define their extruder definition, so they reuse "fdmextruder", but for those machines, they may + # define "material diameter = 1.75" in their machine definition, but in "fdmextruder", it's still "2.85". This + # causes a problem with incorrect default values. + # + # This is also fixed here in this way: If no "material diameter" is specified, it will look for the default value + # in both the Extruder's definition and the Global's definition. If 2 values don't match, we will use the value + # from the Global definition by setting it in the Extruder's DefinitionChanges container. + # + def _fixMaterialDiameterAndNozzleSize(self, global_stack, extruder_stack_list): + keys_to_copy = ["material_diameter", "machine_nozzle_size"] # these will be copied over to all extruders + + extruder_positions_to_update = set() + for extruder_stack in extruder_stack_list: + for key in keys_to_copy: + # Only copy the value when this extruder doesn't have the value. + if extruder_stack.definitionChanges.hasProperty(key, "value"): + continue + + setting_value_in_global_def_changes = global_stack.definitionChanges.getProperty(key, "value") + setting_value_in_global_def = global_stack.definition.getProperty(key, "value") + setting_value = setting_value_in_global_def + if setting_value_in_global_def_changes is not None: + setting_value = setting_value_in_global_def_changes + if setting_value == extruder_stack.definition.getProperty(key, "value"): + continue + + setting_definition = global_stack.getSettingDefinition(key) + new_instance = SettingInstance(setting_definition, extruder_stack.definitionChanges) + new_instance.setProperty("value", setting_value) + new_instance.resetState() # Ensure that the state is not seen as a user state. + extruder_stack.definitionChanges.addInstance(new_instance) + extruder_stack.definitionChanges.setDirty(True) + + # Make sure the material diameter is up to date for the extruder stack. + if key == "material_diameter": + position = int(extruder_stack.getMetaDataEntry("position")) + extruder_positions_to_update.add(position) + + # We have to remove those settings here because we know that those values have been copied to all + # the extruders at this point. + for key in keys_to_copy: + if global_stack.definitionChanges.hasProperty(key, "value"): + global_stack.definitionChanges.removeInstance(key, postpone_emit = True) + + # Update material diameter for extruders + for position in extruder_positions_to_update: + self.updateMaterialForDiameter(position, global_stack = global_stack) + ## Get all extruder values for a certain setting. # # This is exposed to SettingFunction so it can be used in value functions. @@ -503,10 +556,11 @@ class ExtruderManager(QObject): return ExtruderManager.getExtruderValues(key) ## Updates the material container to a material that matches the material diameter set for the printer - def updateMaterialForDiameter(self, extruder_position: int): - global_stack = Application.getInstance().getGlobalContainerStack() + def updateMaterialForDiameter(self, extruder_position: int, global_stack = None): if not global_stack: - return + global_stack = Application.getInstance().getGlobalContainerStack() + if not global_stack: + return if not global_stack.getMetaDataEntry("has_materials", False): return diff --git a/cura/Settings/ExtruderStack.py b/cura/Settings/ExtruderStack.py index 6f89d33393..4400f621c6 100644 --- a/cura/Settings/ExtruderStack.py +++ b/cura/Settings/ExtruderStack.py @@ -3,16 +3,16 @@ from typing import Any, TYPE_CHECKING, Optional -from UM.Application import Application +from PyQt5.QtCore import pyqtProperty + from UM.Decorators import override from UM.MimeTypeDatabase import MimeType, MimeTypeDatabase from UM.Settings.ContainerStack import ContainerStack from UM.Settings.ContainerRegistry import ContainerRegistry from UM.Settings.Interfaces import ContainerInterface, PropertyEvaluationContext -from UM.Settings.SettingInstance import SettingInstance from . import Exceptions -from .CuraContainerStack import CuraContainerStack +from .CuraContainerStack import CuraContainerStack, _ContainerIndexes from .ExtruderManager import ExtruderManager if TYPE_CHECKING: @@ -34,7 +34,7 @@ class ExtruderStack(CuraContainerStack): # # This will set the next stack and ensure that we register this stack as an extruder. @override(ContainerStack) - def setNextStack(self, stack: ContainerStack) -> None: + def setNextStack(self, stack: CuraContainerStack) -> None: super().setNextStack(stack) stack.addExtruder(self) self.addMetaDataEntry("machine", stack.id) @@ -42,75 +42,6 @@ class ExtruderStack(CuraContainerStack): # For backward compatibility: Register the extruder with the Extruder Manager ExtruderManager.getInstance().registerExtruder(self, stack.id) - # Now each machine will have at least one extruder stack. If this is the first extruder, the extruder-specific - # settings such as nozzle size and material diameter should be moved from the machine's definition_changes to - # the this extruder's definition_changes. - # - # We do this here because it is tooooo expansive to do it in the version upgrade: During the version upgrade, - # when we are upgrading a definition_changes container file, there is NO guarantee that other files such as - # machine an extruder stack files are upgraded before this, so we cannot read those files assuming they are in - # the latest format. - # - # MORE: - # For single-extrusion machines, nozzle size is saved in the global stack, so the nozzle size value should be - # carried to the first extruder. - # For material diameter, it was supposed to be applied to all extruders, so its value should be copied to all - # extruders. - - keys_to_copy = ["material_diameter", "machine_nozzle_size"] # these will be copied over to all extruders - - for key in keys_to_copy: - # Only copy the value when this extruder doesn't have the value. - if self.definitionChanges.hasProperty(key, "value"): - continue - - # WARNING: this might be very dangerous and should be refactored ASAP! - # - # We cannot add a setting definition of "material_diameter" into the extruder's definition at runtime - # because all other machines which uses "fdmextruder" as the extruder definition will be affected. - # - # The problem is that single extrusion machines have their default material diameter defined in the global - # definitions. Now we automatically create an extruder stack for those machines using "fdmextruder" - # definition, which doesn't have the specific "material_diameter" and "machine_nozzle_size" defined for - # each machine. This results in wrong values which can be found in the MachineSettings dialog. - # - # To solve this, we put "material_diameter" back into the "fdmextruder" definition because modifying it in - # the extruder definition will affect all machines which uses the "fdmextruder" definition. Moreover, now - # we also check the value defined in the machine definition. If present, the value defined in the global - # stack's definition changes container will be copied. Otherwise, we will check if the default values in the - # machine definition and the extruder definition are the same, and if not, the default value in the machine - # definition will be copied to the extruder stack's definition changes. - # - setting_value_in_global_def_changes = stack.definitionChanges.getProperty(key, "value") - setting_value_in_global_def = stack.definition.getProperty(key, "value") - setting_value = setting_value_in_global_def - if setting_value_in_global_def_changes is not None: - setting_value = setting_value_in_global_def_changes - if setting_value == self.definition.getProperty(key, "value"): - continue - - setting_definition = stack.getSettingDefinition(key) - new_instance = SettingInstance(setting_definition, self.definitionChanges) - new_instance.setProperty("value", setting_value) - new_instance.resetState() # Ensure that the state is not seen as a user state. - self.definitionChanges.addInstance(new_instance) - self.definitionChanges.setDirty(True) - - # Make sure the material diameter is up to date for the extruder stack. - if key == "material_diameter": - from cura.CuraApplication import CuraApplication - machine_manager = CuraApplication.getInstance().getMachineManager() - position = self.getMetaDataEntry("position", "0") - func = lambda p = position: CuraApplication.getInstance().getExtruderManager().updateMaterialForDiameter(p) - machine_manager.machine_extruder_material_update_dict[stack.getId()].append(func) - - # NOTE: We cannot remove the setting from the global stack's definition changes container because for - # material diameter, it needs to be applied to all extruders, but here we don't know how many extruders - # a machine actually has and how many extruders has already been loaded for that machine, so we have to - # keep this setting for any remaining extruders that haven't been loaded yet. - # - # Those settings will be removed in ExtruderManager which knows all those info. - @override(ContainerStack) def getNextStack(self) -> Optional["GlobalStack"]: return super().getNextStack() @@ -119,6 +50,29 @@ class ExtruderStack(CuraContainerStack): def getLoadingPriority(cls) -> int: return 3 + ## Return the filament diameter that the machine requires. + # + # If the machine has no requirement for the diameter, -1 is returned. + # \return The filament diameter for the printer + @property + def materialDiameter(self) -> float: + context = PropertyEvaluationContext(self) + context.context["evaluate_from_container_index"] = _ContainerIndexes.Variant + + return self.getProperty("material_diameter", "value", context = context) + + ## Return the approximate filament diameter that the machine requires. + # + # The approximate material diameter is the material diameter rounded to + # the nearest millimetre. + # + # If the machine has no requirement for the diameter, -1 is returned. + # + # \return The approximate filament diameter for the printer + @pyqtProperty(float) + def approximateMaterialDiameter(self) -> float: + return round(float(self.materialDiameter)) + ## Overridden from ContainerStack # # It will perform a few extra checks when trying to get properties. @@ -187,11 +141,6 @@ class ExtruderStack(CuraContainerStack): if has_global_dependencies: self.getNextStack().propertiesChanged.emit(key, properties) - def findDefaultVariant(self): - # The default variant is defined in the machine stack and/or definition, so use the machine stack to find - # the default variant. - return self.getNextStack().findDefaultVariant() - extruder_stack_mime = MimeType( name = "application/x-cura-extruderstack", diff --git a/cura/Settings/GlobalStack.py b/cura/Settings/GlobalStack.py index 6d18bf615b..ae1f1370ed 100755 --- a/cura/Settings/GlobalStack.py +++ b/cura/Settings/GlobalStack.py @@ -125,21 +125,6 @@ class GlobalStack(CuraContainerStack): def setNextStack(self, next_stack: ContainerStack) -> None: raise Exceptions.InvalidOperationError("Global stack cannot have a next stack!") - ## Gets the approximate filament diameter that the machine requires. - # - # The approximate material diameter is the material diameter rounded to - # the nearest millimetre. - # - # If the machine has no requirement for the diameter, -1 is returned. - # - # \return The approximate filament diameter for the printer, as a string. - @pyqtProperty(str) - def approximateMaterialDiameter(self) -> str: - material_diameter = self.definition.getProperty("material_diameter", "value") - if material_diameter is None: - return "-1" - return str(round(float(material_diameter))) #Round, then convert back to string. - # protected: # Determine whether or not we should try to get the "resolve" property instead of the diff --git a/cura/Settings/MachineManager.py b/cura/Settings/MachineManager.py index c2b2e2b0dd..0cde440fd8 100755 --- a/cura/Settings/MachineManager.py +++ b/cura/Settings/MachineManager.py @@ -12,22 +12,19 @@ from UM.Signal import Signal from PyQt5.QtCore import QObject, pyqtProperty, pyqtSignal, QTimer import UM.FlameProfiler from UM.FlameProfiler import pyqtSlot -from PyQt5.QtWidgets import QMessageBox from UM import Util from UM.Application import Application from UM.Preferences import Preferences from UM.Logger import Logger from UM.Message import Message -from UM.Decorators import deprecated from UM.Settings.ContainerRegistry import ContainerRegistry -from UM.Settings.ContainerStack import ContainerStack from UM.Settings.InstanceContainer import InstanceContainer from UM.Settings.SettingFunction import SettingFunction from UM.Signal import postponeSignals, CompressTechnique -from cura.QualityManager import QualityManager +from cura.Machines.QualityManager import getMachineDefinitionIDForQualitySearch from cura.PrinterOutputDevice import PrinterOutputDevice from cura.PrinterOutput.ConfigurationModel import ConfigurationModel from cura.PrinterOutput.ExtruderConfigurationModel import ExtruderConfigurationModel @@ -38,28 +35,25 @@ from .CuraStackBuilder import CuraStackBuilder from UM.i18n import i18nCatalog catalog = i18nCatalog("cura") -from cura.Settings.ProfilesModel import ProfilesModel - if TYPE_CHECKING: - from UM.Settings.DefinitionContainer import DefinitionContainer from cura.Settings.CuraContainerStack import CuraContainerStack from cura.Settings.GlobalStack import GlobalStack class MachineManager(QObject): + def __init__(self, parent = None): super().__init__(parent) self._active_container_stack = None # type: CuraContainerStack self._global_container_stack = None # type: GlobalStack - self.machine_extruder_material_update_dict = collections.defaultdict(list) + self._current_root_material_id = {} + self._current_root_material_name = {} + self._current_quality_group = None + self._current_quality_changes_group = None - # Used to store the new containers until after confirming the dialog - self._new_variant_container = None # type: Optional[InstanceContainer] - self._new_buildplate_container = None # type: Optional[InstanceContainer] - self._new_material_container = None # type: Optional[InstanceContainer] - self._new_quality_containers = [] # type: List[Dict] + self.machine_extruder_material_update_dict = collections.defaultdict(list) self._error_check_timer = QTimer() self._error_check_timer.setInterval(250) @@ -71,15 +65,18 @@ class MachineManager(QObject): self._instance_container_timer.setSingleShot(True) self._instance_container_timer.timeout.connect(self.__emitChangedSignals) - Application.getInstance().globalContainerStackChanged.connect(self._onGlobalContainerChanged) - Application.getInstance().getContainerRegistry().containerLoadComplete.connect(self._onInstanceContainersChanged) - self._connected_to_profiles_model = False + self._application = Application.getInstance() + self._application.globalContainerStackChanged.connect(self._onGlobalContainerChanged) + self._application.getContainerRegistry().containerLoadComplete.connect(self._onInstanceContainersChanged) ## When the global container is changed, active material probably needs to be updated. self.globalContainerChanged.connect(self.activeMaterialChanged) self.globalContainerChanged.connect(self.activeVariantChanged) self.globalContainerChanged.connect(self.activeQualityChanged) + self.globalContainerChanged.connect(self.activeQualityChangesGroupChanged) + self.globalContainerChanged.connect(self.activeQualityGroupChanged) + self._stacks_have_errors = None # type:Optional[bool] self._empty_definition_changes_container = ContainerRegistry.getInstance().findContainers(id = "empty_definition_changes")[0] @@ -102,15 +99,10 @@ class MachineManager(QObject): ExtruderManager.getInstance().activeExtruderChanged.connect(self.activeStackChanged) self.activeStackChanged.connect(self.activeStackValueChanged) - # when a user closed dialog check if any delayed material or variant changes need to be applied - Application.getInstance().onDiscardOrKeepProfileChangesClosed.connect(self._executeDelayedActiveContainerStackChanges) - Preferences.getInstance().addPreference("cura/active_machine", "") self._global_event_keys = set() - active_machine_id = Preferences.getInstance().getValue("cura/active_machine") - self._printer_output_devices = [] Application.getInstance().getOutputDeviceManager().outputDevicesChanged.connect(self._onOutputDevicesChanged) # There might already be some output devices by the time the signal is connected @@ -122,14 +114,7 @@ class MachineManager(QObject): # Force to compute the current configuration self._onCurrentConfigurationChanged() - if active_machine_id != "" and ContainerRegistry.getInstance().findContainerStacksMetadata(id = active_machine_id): - # An active machine was saved, so restore it. - self.setActiveMachine(active_machine_id) - # Make sure _active_container_stack is properly initiated - ExtruderManager.getInstance().setActiveExtruderIndex(0) - - self._auto_materials_changed = {} - self._auto_hotends_changed = {} + self._application.callLater(self.setInitialActiveMachine) self._material_incompatible_message = Message(catalog.i18nc("@info:status", "The selected material is incompatible with the selected machine or configuration."), @@ -139,6 +124,16 @@ class MachineManager(QObject): if containers: containers[0].nameChanged.connect(self._onMaterialNameChanged) + self._material_manager = self._application._material_manager + self._quality_manager = self._application.getQualityManager() + + # When the materials lookup table gets updated, it can mean that a material has its name changed, which should + # be reflected on the GUI. This signal emission makes sure that it happens. + self._material_manager.materialsUpdated.connect(self.rootMaterialChanged) + + activeQualityGroupChanged = pyqtSignal() + activeQualityChangesGroupChanged = pyqtSignal() + globalContainerChanged = pyqtSignal() # Emitted whenever the global stack is changed (ie: when changing between printers, changing a global profile, but not when changing a value) activeMaterialChanged = pyqtSignal() activeVariantChanged = pyqtSignal() @@ -155,17 +150,21 @@ class MachineManager(QObject): outputDevicesChanged = pyqtSignal() currentConfigurationChanged = pyqtSignal() # Emitted every time the current configurations of the machine changes - def _onOutputDevicesChanged(self) -> None: - for printer_output_device in self._printer_output_devices: - printer_output_device.hotendIdChanged.disconnect(self._onHotendIdChanged) - printer_output_device.materialIdChanged.disconnect(self._onMaterialIdChanged) + rootMaterialChanged = pyqtSignal() + def setInitialActiveMachine(self): + active_machine_id = Preferences.getInstance().getValue("cura/active_machine") + if active_machine_id != "" and ContainerRegistry.getInstance().findContainerStacksMetadata(id = active_machine_id): + # An active machine was saved, so restore it. + self.setActiveMachine(active_machine_id) + # Make sure _active_container_stack is properly initiated + ExtruderManager.getInstance().setActiveExtruderIndex(0) + + def _onOutputDevicesChanged(self) -> None: self._printer_output_devices = [] for printer_output_device in Application.getInstance().getOutputDeviceManager().getOutputDevices(): if isinstance(printer_output_device, PrinterOutputDevice): self._printer_output_devices.append(printer_output_device) - printer_output_device.hotendIdChanged.connect(self._onHotendIdChanged) - printer_output_device.materialIdChanged.connect(self._onMaterialIdChanged) self.outputDevicesChanged.emit() @@ -200,19 +199,6 @@ class MachineManager(QObject): def applyRemoteConfiguration(self, configuration: ConfigurationModel): print("Applying remote configuration", configuration) - - @property - def newVariant(self): - return self._new_variant_container - - @property - def newBuildplate(self): - return self._new_buildplate_container - - @property - def newMaterial(self): - return self._new_material_container - @pyqtProperty("QVariantList", notify = outputDevicesChanged) def printerOutputDevices(self): return self._printer_output_devices @@ -221,114 +207,6 @@ class MachineManager(QObject): def totalNumberOfSettings(self) -> int: return len(ContainerRegistry.getInstance().findDefinitionContainers(id = "fdmprinter")[0].getAllKeys()) - def _onHotendIdChanged(self) -> None: - if not self._global_container_stack or not self._printer_output_devices: - return - - active_printer_model = self._printer_output_devices[0].activePrinter - if not active_printer_model: - return - - change_found = False - machine_id = self.activeMachineId - extruders = sorted(ExtruderManager.getInstance().getMachineExtruders(machine_id), - key=lambda k: k.getMetaDataEntry("position")) - - for extruder_model, extruder in zip(active_printer_model.extruders, extruders): - containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(type="variant", - definition=self._global_container_stack.definition.getId(), - name=extruder_model.hotendID) - if containers: - # The hotend ID is known. - machine_id = self.activeMachineId - if extruder.variant.getName() != extruder_model.hotendID: - change_found = True - self._auto_hotends_changed[extruder.getMetaDataEntry("position")] = containers[0]["id"] - - if change_found: - # A change was found, let the output device handle this. - self._printer_output_devices[0].materialHotendChangedMessage(self._materialHotendChangedCallback) - - def _onMaterialIdChanged(self) -> None: - if not self._global_container_stack or not self._printer_output_devices: - return - - active_printer_model = self._printer_output_devices[0].activePrinter - if not active_printer_model: - return - - change_found = False - machine_id = self.activeMachineId - extruders = sorted(ExtruderManager.getInstance().getMachineExtruders(machine_id), - key=lambda k: k.getMetaDataEntry("position")) - - for extruder_model, extruder in zip(active_printer_model.extruders, extruders): - if extruder_model.activeMaterial is None: - continue - containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(type="material", - definition=self._global_container_stack.definition.getId(), - GUID=extruder_model.activeMaterial.guid) - if containers: - # The material is known. - if extruder.material.getMetaDataEntry("GUID") != extruder_model.activeMaterial.guid: - change_found = True - if self._global_container_stack.definition.getMetaDataEntry("has_variants") and extruder.variant: - variant_id = self.getQualityVariantId(self._global_container_stack.definition, - extruder.variant) - for container in containers: - if container.get("variant") == variant_id: - self._auto_materials_changed[extruder.getMetaDataEntry("position")] = container["id"] - break - else: - # Just use the first result we found. - self._auto_materials_changed[extruder.getMetaDataEntry("position")] = containers[0]["id"] - if change_found: - # A change was found, let the output device handle this. - self._printer_output_devices[0].materialHotendChangedMessage(self._materialHotendChangedCallback) - - def _materialHotendChangedCallback(self, button) -> None: - if button == QMessageBox.No: - self._auto_materials_changed = {} - self._auto_hotends_changed = {} - return - self._autoUpdateMaterials() - self._autoUpdateHotends() - - def _autoUpdateMaterials(self) -> None: - extruder_manager = ExtruderManager.getInstance() - for position in self._auto_materials_changed: - material_id = self._auto_materials_changed[position] - old_index = extruder_manager.activeExtruderIndex - - if old_index != int(position): - extruder_manager.setActiveExtruderIndex(int(position)) - else: - old_index = None - - Logger.log("d", "Setting material of hotend %s to %s" % (position, material_id)) - self.setActiveMaterial(material_id) - - if old_index is not None: - extruder_manager.setActiveExtruderIndex(old_index) - self._auto_materials_changed = {} # Processed all of them now. - - def _autoUpdateHotends(self) -> None: - extruder_manager = ExtruderManager.getInstance() - for position in self._auto_hotends_changed: - hotend_id = self._auto_hotends_changed[position] - old_index = extruder_manager.activeExtruderIndex - - if old_index != int(position): - extruder_manager.setActiveExtruderIndex(int(position)) - else: - old_index = None - Logger.log("d", "Setting hotend variant of hotend %s to %s" % (position, hotend_id)) - self.setActiveVariant(hotend_id) - - if old_index is not None: - extruder_manager.setActiveExtruderIndex(old_index) - self._auto_hotends_changed = {} # Processed all of them now. - def _onGlobalContainerChanged(self) -> None: if self._global_container_stack: try: @@ -382,6 +260,7 @@ class MachineManager(QObject): Application.getInstance().callLater(func) del self.machine_extruder_material_update_dict[self._global_container_stack.getId()] + self.activeQualityGroupChanged.emit() self._error_check_timer.start() ## Update self._stacks_valid according to _checkStacksForErrors and emit if change. @@ -398,8 +277,6 @@ class MachineManager(QObject): self._active_container_stack = ExtruderManager.getInstance().getActiveExtruderStack() - self._error_check_timer.start() - if old_active_container_stack != self._active_container_stack: # Many methods and properties related to the active quality actually depend # on _active_container_stack. If it changes, then the properties change. @@ -409,19 +286,12 @@ class MachineManager(QObject): self.activeQualityChanged.emit() self.activeVariantChanged.emit() self.activeMaterialChanged.emit() + + self.rootMaterialChanged.emit() + self._error_check_timer.start() - def _onProfilesModelChanged(self, *args) -> None: - self.__emitChangedSignals() - def _onInstanceContainersChanged(self, container) -> None: - # This should not trigger the ProfilesModel to be created, or there will be an infinite recursion - if not self._connected_to_profiles_model and ProfilesModel.hasInstance(): - # This triggers updating the qualityModel in SidebarSimple whenever ProfilesModel is updated - Logger.log("d", "Connecting profiles model...") - ProfilesModel.getInstance().itemsChanged.connect(self._onProfilesModelChanged) - self._connected_to_profiles_model = True - self._instance_container_timer.start() def _onPropertyChanged(self, key: str, property_name: str) -> None: @@ -432,16 +302,46 @@ class MachineManager(QObject): elif property_name == "validationState": self._error_check_timer.start() + ## Given a global_stack, make sure that it's all valid by searching for this quality group and applying it again + def _initMachineState(self, global_stack): + material_dict = {} + for position, extruder in global_stack.extruders.items(): + material_dict[position] = extruder.material.getMetaDataEntry("base_file") + self._current_root_material_id = material_dict + global_quality = global_stack.quality + quality_type = global_quality.getMetaDataEntry("quality_type") + global_quality_changes = global_stack.qualityChanges + global_quality_changes_name = global_quality_changes.getName() + + if global_quality_changes.getId() != "empty_quality_changes": + quality_changes_groups = self._application._quality_manager.getQualityChangesGroups(global_stack) + if global_quality_changes_name in quality_changes_groups: + new_quality_changes_group = quality_changes_groups[global_quality_changes_name] + self._setQualityChangesGroup(new_quality_changes_group) + else: + quality_groups = self._application._quality_manager.getQualityGroups(global_stack) + if quality_type not in quality_groups: + Logger.log("w", "Quality type [%s] not found in available qualities [%s]", quality_type, str(quality_groups.values())) + self._setEmptyQuality() + return + new_quality_group = quality_groups[quality_type] + self._setQualityGroup(new_quality_group, empty_quality_changes = True) + @pyqtSlot(str) def setActiveMachine(self, stack_id: str) -> None: self.blurSettings.emit() # Ensure no-one has focus. - self._cancelDelayedActiveContainerStackChanges() container_registry = ContainerRegistry.getInstance() containers = container_registry.findContainerStacks(id = stack_id) if containers: - Application.getInstance().setGlobalContainerStack(containers[0]) + global_stack = containers[0] + ExtruderManager.getInstance().setActiveExtruderIndex(0) # Switch to first extruder + self._global_container_stack = global_stack + Application.getInstance().setGlobalContainerStack(global_stack) + ExtruderManager.getInstance()._globalContainerStackChanged() + self._initMachineState(containers[0]) + self._onGlobalContainerChanged() self.__emitChangedSignals() @@ -479,16 +379,6 @@ class MachineManager(QObject): Logger.log("d", "Checking %s stacks for errors took %.2f s" % (count, time.time() - time_start)) return False - ## Remove all instances from the top instanceContainer (effectively removing all user-changed settings) - @pyqtSlot() - def clearUserSettings(self) -> None: - if not self._active_container_stack: - return - - self.blurSettings.emit() - user_settings = self._active_container_stack.getTop() - user_settings.clear() - ## Check if the global_container has instances in the user container @pyqtProperty(bool, notify = activeStackValueChanged) def hasUserSettings(self) -> bool: @@ -554,25 +444,16 @@ class MachineManager(QObject): def stacksHaveErrors(self) -> bool: return bool(self._stacks_have_errors) - @pyqtProperty(str, notify = activeStackChanged) - def activeUserProfileId(self) -> str: - if self._active_container_stack: - return self._active_container_stack.getTop().getId() - - return "" - @pyqtProperty(str, notify = globalContainerChanged) def activeMachineName(self) -> str: if self._global_container_stack: return self._global_container_stack.getName() - return "" @pyqtProperty(str, notify = globalContainerChanged) def activeMachineId(self) -> str: if self._global_container_stack: return self._global_container_stack.getId() - return "" @pyqtProperty(QObject, notify = globalContainerChanged) @@ -583,43 +464,11 @@ class MachineManager(QObject): def activeStackId(self) -> str: if self._active_container_stack: return self._active_container_stack.getId() - return "" - @pyqtProperty(str, notify = activeMaterialChanged) - def activeMaterialName(self) -> str: - if self._active_container_stack: - material = self._active_container_stack.material - if material: - return material.getName() - - return "" - - @pyqtProperty("QVariantList", notify=activeVariantChanged) - def activeVariantNames(self) -> List[str]: - result = [] - - # Just return the variants in the extruder stack(s). For the variant in the global stack, use activeVariantBuildplateName - active_stacks = ExtruderManager.getInstance().getActiveExtruderStacks() - if active_stacks is not None: - for stack in active_stacks: - variant_container = stack.variant - if variant_container and variant_container != self._empty_variant_container: - result.append(variant_container.getName()) - - return result - - @pyqtProperty("QVariantList", notify = activeMaterialChanged) - def activeMaterialNames(self) -> List[str]: - result = [] - - active_stacks = ExtruderManager.getInstance().getActiveGlobalAndExtruderStacks() - if active_stacks is not None: - for stack in active_stacks: - material_container = stack.material - if material_container and material_container != self._empty_material_container: - result.append(material_container.getName()) - return result + @pyqtProperty(QObject, notify = activeStackChanged) + def activeStack(self) -> Optional["ExtruderStack"]: + return self._active_container_stack @pyqtProperty(str, notify=activeMaterialChanged) def activeMaterialId(self) -> str: @@ -627,24 +476,8 @@ class MachineManager(QObject): material = self._active_container_stack.material if material: return material.getId() - return "" - @pyqtProperty("QVariantMap", notify = activeVariantChanged) - def allActiveVariantIds(self) -> Dict[str, str]: - result = {} - - active_stacks = ExtruderManager.getInstance().getActiveExtruderStacks() - if active_stacks is not None: #If we have a global stack. - for stack in active_stacks: - variant_container = stack.variant - if not variant_container: - continue - - result[stack.getId()] = variant_container.getId() - - return result - ## Gets a dict with the active materials ids set in all extruder stacks and the global stack # (when there is one extruder, the material is set in the global stack) # @@ -669,106 +502,45 @@ class MachineManager(QObject): # # \return The layer height of the currently active quality profile. If # there is no quality profile, this returns 0. - @pyqtProperty(float, notify=activeQualityChanged) + @pyqtProperty(float, notify = activeQualityGroupChanged) def activeQualityLayerHeight(self) -> float: if not self._global_container_stack: return 0 - - quality_changes = self._global_container_stack.qualityChanges - if quality_changes: - value = self._global_container_stack.getRawProperty("layer_height", "value", skip_until_container = quality_changes.getId()) + if self._current_quality_changes_group: + value = self._global_container_stack.getRawProperty("layer_height", "value", skip_until_container = self._global_container_stack.qualityChanges.getId()) if isinstance(value, SettingFunction): value = value(self._global_container_stack) return value - quality = self._global_container_stack.quality - if quality: - value = self._global_container_stack.getRawProperty("layer_height", "value", skip_until_container = quality.getId()) + elif self._current_quality_group: + value = self._global_container_stack.getRawProperty("layer_height", "value", skip_until_container = self._global_container_stack.quality.getId()) if isinstance(value, SettingFunction): value = value(self._global_container_stack) return value + return 0 - return 0 # No quality profile. - - ## Get the Material ID associated with the currently active material - # \returns MaterialID (string) if found, empty string otherwise - @pyqtProperty(str, notify=activeQualityChanged) - def activeQualityMaterialId(self) -> str: - if self._active_container_stack: - quality = self._active_container_stack.quality - if quality: - material_id = quality.getMetaDataEntry("material") - if material_id: - # if the currently active machine inherits its qualities from a different machine - # definition, make sure to return a material that is relevant to that machine definition - definition_id = self.activeDefinitionId - quality_definition_id = self.activeQualityDefinitionId - if definition_id != quality_definition_id: - material_id = material_id.replace(definition_id, quality_definition_id, 1) - - return material_id - return "" - - @pyqtProperty(str, notify=activeQualityChanged) - def activeQualityName(self) -> str: - if self._active_container_stack and self._global_container_stack: - quality = self._global_container_stack.qualityChanges - if quality and not isinstance(quality, type(self._empty_quality_changes_container)): - return quality.getName() - quality = self._active_container_stack.quality - if quality: - return quality.getName() - return "" - - @pyqtProperty(str, notify=activeQualityChanged) - def activeQualityId(self) -> str: - if self._active_container_stack: - quality = self._active_container_stack.quality - if isinstance(quality, type(self._empty_quality_container)): - return "" - quality_changes = self._active_container_stack.qualityChanges - if quality and quality_changes: - if isinstance(quality_changes, type(self._empty_quality_changes_container)): - # It's a built-in profile - return quality.getId() - else: - # Custom profile - return quality_changes.getId() - return "" - - @pyqtProperty(str, notify=activeQualityChanged) - def globalQualityId(self) -> str: - if self._global_container_stack: - quality = self._global_container_stack.qualityChanges - if quality and not isinstance(quality, type(self._empty_quality_changes_container)): - return quality.getId() - quality = self._global_container_stack.quality - if quality: - return quality.getId() - return "" - - @pyqtProperty(str, notify=activeVariantChanged) - def globalVariantId(self) -> str: + @pyqtProperty(str, notify = activeVariantChanged) + def globalVariantName(self) -> str: if self._global_container_stack: variant = self._global_container_stack.variant if variant and not isinstance(variant, type(self._empty_variant_container)): - return variant.getId() + return variant.getName() return "" - @pyqtProperty(str, notify = activeQualityChanged) + @pyqtProperty(str, notify = activeQualityGroupChanged) def activeQualityType(self) -> str: + quality_type = "" if self._active_container_stack: - quality = self._active_container_stack.quality - if quality: - return quality.getMetaDataEntry("quality_type") - return "" + if self._current_quality_group: + quality_type = self._current_quality_group.quality_type + return quality_type - @pyqtProperty(bool, notify = activeQualityChanged) + @pyqtProperty(bool, notify = activeQualityGroupChanged) def isActiveQualitySupported(self) -> bool: - if self._active_container_stack: - quality = self._active_container_stack.quality - if quality: - return Util.parseBool(quality.getMetaDataEntry("supported", True)) - return False + is_supported = False + if self._global_container_stack: + if self._current_quality_group: + is_supported = self._current_quality_group.is_available + return is_supported ## Returns whether there is anything unsupported in the current set-up. # @@ -787,29 +559,6 @@ class MachineManager(QObject): return False return True - ## Get the Quality ID associated with the currently active extruder - # Note that this only returns the "quality", not the "quality_changes" - # \returns QualityID (string) if found, empty string otherwise - # \sa activeQualityId() - # \todo Ideally, this method would be named activeQualityId(), and the other one - # would be named something like activeQualityOrQualityChanges() for consistency - @pyqtProperty(str, notify = activeQualityChanged) - def activeQualityContainerId(self) -> str: - # We're using the active stack instead of the global stack in case the list of qualities differs per extruder - if self._global_container_stack: - quality = self._active_container_stack.quality - if quality: - return quality.getId() - return "" - - @pyqtProperty(str, notify = activeQualityChanged) - def activeQualityChangesId(self) -> str: - if self._active_container_stack: - quality_changes = self._active_container_stack.qualityChanges - if quality_changes and not isinstance(quality_changes, type(self._empty_quality_changes_container)): - return quality_changes.getId() - return "" - ## Check if a container is read_only @pyqtSlot(str, result = bool) def isReadOnly(self, container_id: str) -> bool: @@ -826,389 +575,6 @@ class MachineManager(QObject): if extruder_stack != self._active_container_stack and extruder_stack.getProperty(key, "value") != new_value: extruder_stack.userChanges.setProperty(key, "value", new_value) # TODO: nested property access, should be improved - ## Set the active material by switching out a container - # Depending on from/to material+current variant, a quality profile is chosen and set. - @pyqtSlot(str) - def setActiveMaterial(self, material_id: str, always_discard_changes = False): - with postponeSignals(*self._getContainerChangedSignals(), compress = CompressTechnique.CompressPerParameterValue): - containers = ContainerRegistry.getInstance().findInstanceContainers(id = material_id) - if not containers or not self._active_container_stack: - return - material_container = containers[0] - - Logger.log("d", "Attempting to change the active material to %s", material_id) - - old_material = self._active_container_stack.material - old_quality = self._active_container_stack.quality - old_quality_type = None - if old_quality and old_quality.getId() != self._empty_quality_container.getId(): - old_quality_type = old_quality.getMetaDataEntry("quality_type") - old_quality_changes = self._active_container_stack.qualityChanges - if not old_material: - Logger.log("w", "While trying to set the active material, no material was found to replace it.") - return - - if old_quality_changes and isinstance(old_quality_changes, type(self._empty_quality_changes_container)): - old_quality_changes = None - - self.blurSettings.emit() - old_material.nameChanged.disconnect(self._onMaterialNameChanged) - - self._new_material_container = material_container # self._active_container_stack will be updated with a delay - Logger.log("d", "Active material changed") - - material_container.nameChanged.connect(self._onMaterialNameChanged) - - if material_container.getMetaDataEntry("compatible") == False: - self._material_incompatible_message.show() - else: - self._material_incompatible_message.hide() - - quality_type = None - new_quality_id = None - if old_quality: - new_quality_id = old_quality.getId() - quality_type = old_quality.getMetaDataEntry("quality_type") - if old_quality_changes: - quality_type = old_quality_changes.getMetaDataEntry("quality_type") - new_quality_id = old_quality_changes.getId() - - global_stack = Application.getInstance().getGlobalContainerStack() - if global_stack: - quality_manager = QualityManager.getInstance() - - candidate_quality = None - if quality_type: - candidate_quality = quality_manager.findQualityByQualityType(quality_type, - quality_manager.getWholeMachineDefinition(global_stack.definition), - [material_container.getMetaData()]) - - if not candidate_quality or candidate_quality.getId() == self._empty_quality_changes_container: - Logger.log("d", "Attempting to find fallback quality") - # Fall back to a quality (which must be compatible with all other extruders) - new_qualities = quality_manager.findAllUsableQualitiesForMachineAndExtruders( - self._global_container_stack, ExtruderManager.getInstance().getExtruderStacks()) - - quality_types = sorted([q.getMetaDataEntry("quality_type") for q in new_qualities], reverse = True) - quality_type_to_use = None - if quality_types: - # try to use the same quality as before, otherwise the first one in the quality_types - quality_type_to_use = quality_types[0] - if old_quality_type is not None and old_quality_type in quality_type_to_use: - quality_type_to_use = old_quality_type - - new_quality = None - for q in new_qualities: - if quality_type_to_use is not None and q.getMetaDataEntry("quality_type") == quality_type_to_use: - new_quality = q - break - - if new_quality is not None: - new_quality_id = new_quality.getId() # Just pick the first available one - else: - Logger.log("w", "No quality profile found that matches the current machine and extruders.") - else: - if not old_quality_changes: - new_quality_id = candidate_quality.getId() - - self.setActiveQuality(new_quality_id, always_discard_changes = always_discard_changes) - - @pyqtSlot(str) - def setActiveVariant(self, variant_id: str, always_discard_changes = False): - with postponeSignals(*self._getContainerChangedSignals(), compress = CompressTechnique.CompressPerParameterValue): - containers = ContainerRegistry.getInstance().findInstanceContainers(id = variant_id) - if not containers or not self._active_container_stack: - return - Logger.log("d", "Attempting to change the active variant to %s", variant_id) - old_variant = self._active_container_stack.variant - old_material = self._active_container_stack.material - if old_variant: - self.blurSettings.emit() - self._new_variant_container = containers[0] # self._active_container_stack will be updated with a delay - Logger.log("d", "Active variant changed to {active_variant_id}".format(active_variant_id = containers[0].getId())) - preferred_material_name = None - if old_material: - preferred_material_name = old_material.getName() - preferred_material_id = self._updateMaterialContainer(self._global_container_stack.definition, self._global_container_stack, containers[0], preferred_material_name).id - self.setActiveMaterial(preferred_material_id, always_discard_changes = always_discard_changes) - else: - Logger.log("w", "While trying to set the active variant, no variant was found to replace.") - - @pyqtSlot(str) - def setActiveVariantBuildplate(self, variant_buildplate_id: str): - with postponeSignals(*self._getContainerChangedSignals(), compress = CompressTechnique.CompressPerParameterValue): - containers = ContainerRegistry.getInstance().findInstanceContainers(id = variant_buildplate_id) - if not containers or not self._global_container_stack: - return - Logger.log("d", "Attempting to change the active buildplate to %s", variant_buildplate_id) - old_buildplate = self._global_container_stack.variant - if old_buildplate: - self.blurSettings.emit() - self._new_buildplate_container = containers[0] # self._active_container_stack will be updated with a delay - Logger.log("d", "Active buildplate changed to {active_variant_buildplate_id}".format(active_variant_buildplate_id = containers[0].getId())) - - # Force set the active quality as it is so the values are updated - self.setActiveMaterial(self._active_container_stack.material.getId()) - else: - Logger.log("w", "While trying to set the active buildplate, no buildplate was found to replace.") - - ## set the active quality - # \param quality_id The quality_id of either a quality or a quality_changes - @pyqtSlot(str) - def setActiveQuality(self, quality_id: str, always_discard_changes = False): - with postponeSignals(*self._getContainerChangedSignals(), compress = CompressTechnique.CompressPerParameterValue): - self.blurSettings.emit() - - Logger.log("d", "Attempting to change the active quality to %s", quality_id) - - containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(id = quality_id) - if not containers or not self._global_container_stack: - return - - # Quality profile come in two flavours: type=quality and type=quality_changes - # If we found a quality_changes profile then look up its parent quality profile. - container_type = containers[0].get("type") - quality_name = containers[0]["name"] - quality_type = containers[0].get("quality_type") - - # Get quality container and optionally the quality_changes container. - if container_type == "quality": - new_quality_settings_list = self.determineQualityAndQualityChangesForQualityType(quality_type) - elif container_type == "quality_changes": - new_quality_settings_list = self._determineQualityAndQualityChangesForQualityChanges(quality_name) - else: - Logger.log("e", "Tried to set quality to a container that is not of the right type: {container_id}".format(container_id = containers[0]["id"])) - return - - # Check if it was at all possible to find new settings - if new_quality_settings_list is None: - return - - # check if any of the stacks have a not supported profile - # if that is the case, all stacks should have a not supported state (otherwise it will show quality_type normal) - has_not_supported_quality = False - - # check all stacks for not supported - for setting_info in new_quality_settings_list: - if setting_info["quality"].getMetaDataEntry("quality_type") == "not_supported": - has_not_supported_quality = True - break - - # set all stacks to not supported if that's the case - if has_not_supported_quality: - for setting_info in new_quality_settings_list: - setting_info["quality"] = self._empty_quality_container - - self._new_quality_containers.clear() - - # store the upcoming quality profile changes per stack for later execution - # this prevents re-slicing before the user has made a choice in the discard or keep dialog - # (see _executeDelayedActiveContainerStackChanges) - for setting_info in new_quality_settings_list: - stack = setting_info["stack"] - stack_quality = setting_info["quality"] - stack_quality_changes = setting_info["quality_changes"] - - self._new_quality_containers.append({ - "stack": stack, - "quality": stack_quality, - "quality_changes": stack_quality_changes - }) - - Logger.log("d", "Active quality changed") - - # show the keep/discard dialog after the containers have been switched. Otherwise, the default values on - # the dialog will be the those before the switching. - self._executeDelayedActiveContainerStackChanges() - - if self.hasUserSettings and Preferences.getInstance().getValue("cura/active_mode") == 1 and not always_discard_changes: - Application.getInstance().discardOrKeepProfileChanges() - - ## Used to update material and variant in the active container stack with a delay. - # This delay prevents the stack from triggering a lot of signals (eventually resulting in slicing) - # before the user decided to keep or discard any of their changes using the dialog. - # The Application.onDiscardOrKeepProfileChangesClosed signal triggers this method. - def _executeDelayedActiveContainerStackChanges(self): - - Logger.log("d", "Applying configuration changes...") - - if self._new_variant_container is not None: - self._active_container_stack.variant = self._new_variant_container - self._new_variant_container = None - - if self._new_buildplate_container is not None: - self._global_container_stack.variant = self._new_buildplate_container - self._new_buildplate_container = None - - if self._new_material_container is not None: - self._active_container_stack.material = self._new_material_container - self._new_material_container = None - - # apply the new quality to all stacks - if self._new_quality_containers: - for new_quality in self._new_quality_containers: - self._replaceQualityOrQualityChangesInStack(new_quality["stack"], new_quality["quality"], postpone_emit = True) - self._replaceQualityOrQualityChangesInStack(new_quality["stack"], new_quality["quality_changes"], postpone_emit = True) - - for new_quality in self._new_quality_containers: - new_quality["stack"].nameChanged.connect(self._onQualityNameChanged) - new_quality["stack"].sendPostponedEmits() # Send the signals that were postponed in _replaceQualityOrQualityChangesInStack - - self._new_quality_containers.clear() - - Logger.log("d", "New configuration applied") - - ## Cancel set changes for material and variant in the active container stack. - # Used for ignoring any changes when switching between printers (setActiveMachine) - def _cancelDelayedActiveContainerStackChanges(self): - self._new_material_container = None - self._new_buildplate_container = None - self._new_variant_container = None - - ## Determine the quality and quality changes settings for the current machine for a quality name. - # - # \param quality_name \type{str} the name of the quality. - # \return \type{List[Dict]} with keys "stack", "quality" and "quality_changes". - @UM.FlameProfiler.profile - def determineQualityAndQualityChangesForQualityType(self, quality_type: str) -> List[Dict[str, Union["CuraContainerStack", InstanceContainer]]]: - quality_manager = QualityManager.getInstance() - result = [] - empty_quality_changes = self._empty_quality_changes_container - global_container_stack = self._global_container_stack - if not global_container_stack: - return [] - - global_machine_definition = quality_manager.getParentMachineDefinition(global_container_stack.definition) - extruder_stacks = ExtruderManager.getInstance().getActiveExtruderStacks() - - # find qualities for extruders - for extruder_stack in extruder_stacks: - material_metadata = extruder_stack.material.getMetaData() - - # TODO: fix this - if self._new_material_container and extruder_stack.getId() == self._active_container_stack.getId(): - material_metadata = self._new_material_container.getMetaData() - - quality = quality_manager.findQualityByQualityType(quality_type, global_machine_definition, [material_metadata]) - - if not quality: - # No quality profile is found for this quality type. - quality = self._empty_quality_container - - result.append({ - "stack": extruder_stack, - "quality": quality, - "quality_changes": empty_quality_changes - }) - - # also find a global quality for the machine - global_quality = quality_manager.findQualityByQualityType(quality_type, global_machine_definition, [], global_quality = "True") - - # if there is not global quality but we're using a single extrusion machine, copy the quality of the first extruder - CURA-4482 - if not global_quality and len(extruder_stacks) == 1: - global_quality = result[0]["quality"] - - # if there is still no global quality, set it to empty (not supported) - if not global_quality: - global_quality = self._empty_quality_container - - result.append({ - "stack": global_container_stack, - "quality": global_quality, - "quality_changes": empty_quality_changes - }) - - return result - - ## Determine the quality and quality changes settings for the current machine for a quality changes name. - # - # \param quality_changes_name \type{str} the name of the quality changes. - # \return \type{List[Dict]} with keys "stack", "quality" and "quality_changes". - def _determineQualityAndQualityChangesForQualityChanges(self, quality_changes_name: str) -> Optional[List[Dict[str, Union["CuraContainerStack", InstanceContainer]]]]: - result = [] - quality_manager = QualityManager.getInstance() - - global_container_stack = self._global_container_stack - global_machine_definition = quality_manager.getParentMachineDefinition(global_container_stack.definition) - quality_changes_profiles = quality_manager.findQualityChangesByName(quality_changes_name, global_machine_definition) - - global_quality_changes = [qcp for qcp in quality_changes_profiles if qcp.getMetaDataEntry("extruder") is None] - if global_quality_changes: - global_quality_changes = global_quality_changes[0] - else: - Logger.log("e", "Could not find the global quality changes container with name %s", quality_changes_name) - return None - - # For the global stack, find a quality which matches the quality_type in - # the quality changes profile and also satisfies any material constraints. - quality_type = global_quality_changes.getMetaDataEntry("quality_type") - - extruder_stacks = ExtruderManager.getInstance().getActiveExtruderStacks() - - # append the extruder quality changes - for extruder_stack in extruder_stacks: - extruder_definition = quality_manager.getParentMachineDefinition(extruder_stack.definition) - - quality_changes_list = [qcp for qcp in quality_changes_profiles if qcp.getMetaDataEntry("extruder") == extruder_definition.getId()] - - if quality_changes_list: - quality_changes = quality_changes_list[0] - else: - quality_changes = global_quality_changes - if not quality_changes: - quality_changes = self._empty_quality_changes_container - - material_metadata = extruder_stack.material.getMetaData() - - if self._new_material_container and self._active_container_stack.getId() == extruder_stack.getId(): - material_metadata = self._new_material_container.getMetaData() - - quality = quality_manager.findQualityByQualityType(quality_type, global_machine_definition, [material_metadata]) - - if not quality: - # No quality profile found for this quality type. - quality = self._empty_quality_container - - result.append({ - "stack": extruder_stack, - "quality": quality, - "quality_changes": quality_changes - }) - - # append the global quality changes - global_quality = quality_manager.findQualityByQualityType(quality_type, global_machine_definition, global_quality = "True") - - # if there is not global quality but we're using a single extrusion machine, copy the quality of the first extruder - CURA-4482 - if not global_quality and len(extruder_stacks) == 1: - global_quality = result[0]["quality"] - - # if still no global quality changes are found we set it to empty (not supported) - if not global_quality: - global_quality = self._empty_quality_container - - result.append({ - "stack": global_container_stack, - "quality": global_quality, - "quality_changes": global_quality_changes - }) - - return result - - def _replaceQualityOrQualityChangesInStack(self, stack: "CuraContainerStack", container: "InstanceContainer", postpone_emit = False): - # Disconnect the signal handling from the old container. - container_type = container.getMetaDataEntry("type") - if container_type == "quality": - stack.quality.nameChanged.disconnect(self._onQualityNameChanged) - stack.setQuality(container, postpone_emit = postpone_emit) - stack.quality.nameChanged.connect(self._onQualityNameChanged) - elif container_type == "quality_changes" or container_type is None: - # If the container is an empty container, we need to change the quality_changes. - # Quality can never be set to empty. - stack.qualityChanges.nameChanged.disconnect(self._onQualityNameChanged) - stack.setQualityChanges(container, postpone_emit = postpone_emit) - stack.qualityChanges.nameChanged.connect(self._onQualityNameChanged) - self._onQualityNameChanged() - @pyqtProperty(str, notify = activeVariantChanged) def activeVariantName(self) -> str: if self._active_container_stack: @@ -1218,15 +584,6 @@ class MachineManager(QObject): return "" - @pyqtProperty(str, notify = activeVariantChanged) - def activeVariantId(self) -> str: - if self._active_container_stack: - variant = self._active_container_stack.variant - if variant: - return variant.getId() - - return "" - @pyqtProperty(str, notify = activeVariantChanged) def activeVariantBuildplateName(self) -> str: if self._global_container_stack: @@ -1243,55 +600,14 @@ class MachineManager(QObject): return "" - @pyqtProperty(str, notify=globalContainerChanged) - def activeDefinitionName(self) -> str: - if self._global_container_stack: - return self._global_container_stack.definition.getName() - - return "" - ## Get the Definition ID to use to select quality profiles for the currently active machine # \returns DefinitionID (string) if found, empty string otherwise - # \sa getQualityDefinitionId @pyqtProperty(str, notify = globalContainerChanged) def activeQualityDefinitionId(self) -> str: if self._global_container_stack: - return self.getQualityDefinitionId(self._global_container_stack.definition) + return getMachineDefinitionIDForQualitySearch(self._global_container_stack) return "" - ## Get the Definition ID to use to select quality profiles for machines of the specified definition - # This is normally the id of the definition itself, but machines can specify a different definition to inherit qualities from - # \param definition (DefinitionContainer) machine definition - # \returns DefinitionID (string) if found, empty string otherwise - def getQualityDefinitionId(self, definition: "DefinitionContainer") -> str: - return QualityManager.getInstance().getParentMachineDefinition(definition).getId() - - ## Get the Variant ID to use to select quality profiles for the currently active variant - # \returns VariantID (string) if found, empty string otherwise - # \sa getQualityVariantId - @pyqtProperty(str, notify = activeVariantChanged) - def activeQualityVariantId(self) -> str: - if self._active_container_stack: - variant = self._active_container_stack.variant - if variant: - return self.getQualityVariantId(self._global_container_stack.definition, variant) - return "" - - ## Get the Variant ID to use to select quality profiles for variants of the specified definitions - # This is normally the id of the variant itself, but machines can specify a different definition - # to inherit qualities from, which has consequences for the variant to use as well - # \param definition (DefinitionContainer) machine definition - # \param variant (InstanceContainer) variant definition - # \returns VariantID (string) if found, empty string otherwise - def getQualityVariantId(self, definition: "DefinitionContainer", variant: "InstanceContainer") -> str: - variant_id = variant.getId() - definition_id = definition.getId() - quality_definition_id = self.getQualityDefinitionId(definition) - - if definition_id != quality_definition_id: - variant_id = variant_id.replace(definition_id, quality_definition_id, 1) - return variant_id - ## Gets how the active definition calls variants # Caveat: per-definition-variant-title is currently not translated (though the fallback is) @pyqtProperty(str, notify = globalContainerChanged) @@ -1475,47 +791,12 @@ class MachineManager(QObject): # Signal that the global stack has changed Application.getInstance().globalContainerStackChanged.emit() - @staticmethod - def createMachineManager(): - return MachineManager() - - @deprecated("Use ExtruderStack.material = ... and it won't be necessary", "2.7") - def _updateMaterialContainer(self, definition: "DefinitionContainer", stack: "ContainerStack", variant_container: Optional["InstanceContainer"] = None, preferred_material_name: Optional[str] = None) -> InstanceContainer: - if not definition.getMetaDataEntry("has_materials"): - return self._empty_material_container - - approximate_material_diameter = str(round(stack.getProperty("material_diameter", "value"))) - search_criteria = { "type": "material", "approximate_diameter": approximate_material_diameter } - - if definition.getMetaDataEntry("has_machine_materials"): - search_criteria["definition"] = self.getQualityDefinitionId(definition) - - if definition.getMetaDataEntry("has_variants") and variant_container: - search_criteria["variant"] = self.getQualityVariantId(definition, variant_container) - else: - search_criteria["definition"] = "fdmprinter" - - if preferred_material_name: - search_criteria["name"] = preferred_material_name - else: - preferred_material = definition.getMetaDataEntry("preferred_material") - if preferred_material: - search_criteria["id"] = preferred_material - - containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria) - if containers: - return containers[0] - - if "variant" in search_criteria or "id" in search_criteria: - # If a material by this name can not be found, try a wider set of search criteria - search_criteria.pop("variant", None) - search_criteria.pop("id", None) - - containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria) - if containers: - return containers[0] - Logger.log("w", "Unable to find a material container with provided criteria, returning an empty one instead.") - return self._empty_material_container + @pyqtSlot(int, result = QObject) + def getExtruder(self, position: int): + extruder = None + if self._global_container_stack: + extruder = self._global_container_stack.extruders.get(str(position)) + return extruder def _onMachineNameChanged(self): self.globalContainerChanged.emit() @@ -1530,3 +811,263 @@ class MachineManager(QObject): stacks = ExtruderManager.getInstance().getActiveExtruderStacks() stacks.append(self._global_container_stack) return [ s.containersChanged for s in stacks ] + + @pyqtSlot(str, str, str) + def setSettingForAllExtruders(self, setting_name: str, property_name: str, property_value: str): + for key, extruder in self._global_container_stack.extruders.items(): + container = extruder.userChanges + container.setProperty(setting_name, property_name, property_value) + + @pyqtProperty("QVariantList", notify = rootMaterialChanged) + def currentExtruderPositions(self): + return sorted(list(self._current_root_material_id.keys())) + + @pyqtProperty("QVariant", notify = rootMaterialChanged) + def currentRootMaterialId(self): + # initial filling the current_root_material_id + self._current_root_material_id = {} + for position in self._global_container_stack.extruders: + self._current_root_material_id[position] = self._global_container_stack.extruders[position].material.getMetaDataEntry("base_file") + return self._current_root_material_id + + @pyqtProperty("QVariant", notify = rootMaterialChanged) + def currentRootMaterialName(self): + # initial filling the current_root_material_name + if self._global_container_stack: + self._current_root_material_name = {} + for position in self._global_container_stack.extruders: + if position not in self._current_root_material_name: + material = self._global_container_stack.extruders[position].material + self._current_root_material_name[position] = material.getName() + return self._current_root_material_name + + ## Return the variant names in the extruder stack(s). + ## For the variant in the global stack, use activeVariantBuildplateName + @pyqtProperty("QVariant", notify = activeVariantChanged) + def activeVariantNames(self): + result = {} + + active_stacks = ExtruderManager.getInstance().getActiveExtruderStacks() + if active_stacks is not None: + for stack in active_stacks: + variant_container = stack.variant + position = stack.getMetaDataEntry("position") + if variant_container and variant_container != self._empty_variant_container: + result[position] = variant_container.getName() + + return result + + # + # Sets all quality and quality_changes containers to empty_quality and empty_quality_changes containers + # for all stacks in the currently active machine. + # + def _setEmptyQuality(self): + self._current_quality_group = None + self._current_quality_changes_group = None + self._global_container_stack.quality = self._empty_quality_container + self._global_container_stack.qualityChanges = self._empty_quality_changes_container + for extruder in self._global_container_stack.extruders.values(): + extruder.quality = self._empty_quality_container + extruder.qualityChanges = self._empty_quality_changes_container + + self.activeQualityGroupChanged.emit() + self.activeQualityChangesGroupChanged.emit() + + def _setQualityGroup(self, quality_group, empty_quality_changes = True): + self._current_quality_group = quality_group + if empty_quality_changes: + self._current_quality_changes_group = None + + # Set quality and quality_changes for the GlobalStack + self._global_container_stack.quality = quality_group.node_for_global.getContainer() + if empty_quality_changes: + self._global_container_stack.qualityChanges = self._empty_quality_changes_container + + # Set quality and quality_changes for each ExtruderStack + for position, node in quality_group.nodes_for_extruders.items(): + self._global_container_stack.extruders[position].quality = node.getContainer() + if empty_quality_changes: + self._global_container_stack.extruders[position].qualityChanges = self._empty_quality_changes_container + + self.activeQualityGroupChanged.emit() + self.activeQualityChangesGroupChanged.emit() + + def _setQualityChangesGroup(self, quality_changes_group): + quality_type = quality_changes_group.quality_type + quality_group_dict = self._quality_manager.getQualityGroups(self._global_container_stack) + quality_group = quality_group_dict[quality_type] + + quality_changes_container = self._empty_quality_changes_container + quality_container = self._empty_quality_changes_container + if quality_changes_group.node_for_global: + quality_changes_container = quality_changes_group.node_for_global.getContainer() + if quality_group.node_for_global: + quality_container = quality_group.node_for_global.getContainer() + + self._global_container_stack.quality = quality_container + self._global_container_stack.qualityChanges = quality_changes_container + + for position, extruder in self._global_container_stack.extruders.items(): + quality_changes_node = quality_changes_group.nodes_for_extruders.get(position) + quality_node = quality_group.nodes_for_extruders.get(position) + + quality_changes_container = self._empty_quality_changes_container + quality_container = self._empty_quality_changes_container + if quality_changes_node: + quality_changes_container = quality_changes_node.getContainer() + if quality_node: + quality_container = quality_node.getContainer() + + extruder.quality = quality_container + extruder.qualityChanges = quality_changes_container + + self._current_quality_group = quality_group + self._current_quality_changes_group = quality_changes_group + self.activeQualityGroupChanged.emit() + self.activeQualityChangesGroupChanged.emit() + + def _setVariantNode(self, position, container_node): + self._global_container_stack.extruders[position].variant = container_node.getContainer() + self.activeVariantChanged.emit() + + def _setGlobalVariant(self, container_node): + self._global_container_stack.variant = container_node.getContainer() + + def _setMaterial(self, position, container_node = None): + if container_node: + self._global_container_stack.extruders[position].material = container_node.getContainer() + else: + self._global_container_stack.extruders[position].material = self._empty_material_container + # The _current_root_material_id is used in the MaterialMenu to see which material is selected + root_material_id = container_node.metadata["base_file"] + root_material_name = container_node.getContainer().getName() + if root_material_id != self._current_root_material_id[position]: + self._current_root_material_id[position] = root_material_id + self._current_root_material_name[position] = root_material_name + self.rootMaterialChanged.emit() + + def activeMaterialsCompatible(self): + # check material - variant compatibility + if Util.parseBool(self._global_container_stack.getMetaDataEntry("has_materials", False)): + for position, extruder in self._global_container_stack.extruders.items(): + if not extruder.material.getMetaDataEntry("compatible"): + return False + return True + + ## Update current quality type and machine after setting material + def _updateQualityWithMaterial(self): + current_quality = None + if self._current_quality_group: + current_quality = self._current_quality_group.quality_type + quality_manager = Application.getInstance()._quality_manager + candidate_quality_groups = quality_manager.getQualityGroups(self._global_container_stack) + available_quality_types = {qt for qt, g in candidate_quality_groups.items() if g.is_available} + + if not self.activeMaterialsCompatible(): + self._setEmptyQuality() + return + + if not available_quality_types: + self._setEmptyQuality() + return + + if current_quality in available_quality_types: + self._setQualityGroup(candidate_quality_groups[current_quality], empty_quality_changes = False) + return + + quality_type = sorted(list(available_quality_types))[0] + preferred_quality_type = self._global_container_stack.getMetaDataEntry("preferred_quality_type") + if preferred_quality_type in available_quality_types: + quality_type = preferred_quality_type + + self._setQualityGroup(candidate_quality_groups[quality_type], empty_quality_changes = True) + + def _updateMaterialWithVariant(self, position: Optional[str]): + if position is None: + position_list = list(self._global_container_stack.extruders.keys()) + else: + position_list = [position] + + for position in position_list: + extruder = self._global_container_stack.extruders[position] + + current_material_base_name = extruder.material.getMetaDataEntry("base_file") + current_variant_name = extruder.variant.getMetaDataEntry("name") + + material_manager = Application.getInstance()._material_manager + material_diameter = self._global_container_stack.getProperty("material_diameter", "value") + candidate_materials = material_manager.getAvailableMaterials( + self._global_container_stack.definition.getId(), + current_variant_name, + material_diameter) + + if not candidate_materials: + self._setMaterial(position, container_node = None) + continue + + if current_material_base_name in candidate_materials: + new_material = candidate_materials[current_material_base_name] + self._setMaterial(position, new_material) + continue + + @pyqtSlot("QVariant") + def setGlobalVariant(self, container_node): + self.blurSettings.emit() + with postponeSignals(*self._getContainerChangedSignals(), compress = CompressTechnique.CompressPerParameterValue): + self._setGlobalVariant(container_node) + self._updateMaterialWithVariant(None) # Update all materials + self._updateQualityWithMaterial() + + @pyqtSlot(str, "QVariant") + def setMaterial(self, position, container_node): + position = str(position) + self.blurSettings.emit() + with postponeSignals(*self._getContainerChangedSignals(), compress = CompressTechnique.CompressPerParameterValue): + self._setMaterial(position, container_node) + self._updateQualityWithMaterial() + + @pyqtSlot(str, "QVariant") + def setVariantGroup(self, position, container_node): + position = str(position) + self.blurSettings.emit() + with postponeSignals(*self._getContainerChangedSignals(), compress = CompressTechnique.CompressPerParameterValue): + self._setVariantNode(position, container_node) + self._updateMaterialWithVariant(position) + self._updateQualityWithMaterial() + + @pyqtSlot(QObject) + def setQualityGroup(self, quality_group): + self.blurSettings.emit() + with postponeSignals(*self._getContainerChangedSignals(), compress = CompressTechnique.CompressPerParameterValue): + self._setQualityGroup(quality_group) + + # See if we need to show the Discard or Keep changes screen + if self.hasUserSettings and Preferences.getInstance().getValue("cura/active_mode") == 1: + Application.getInstance().discardOrKeepProfileChanges() + + @pyqtProperty(QObject, fset = setQualityGroup, notify = activeQualityGroupChanged) + def activeQualityGroup(self): + return self._current_quality_group + + @pyqtSlot(QObject) + def setQualityChangesGroup(self, quality_changes_group): + self.blurSettings.emit() + with postponeSignals(*self._getContainerChangedSignals(), compress = CompressTechnique.CompressPerParameterValue): + self._setQualityChangesGroup(quality_changes_group) + + # See if we need to show the Discard or Keep changes screen + if self.hasUserSettings and Preferences.getInstance().getValue("cura/active_mode") == 1: + Application.getInstance().discardOrKeepProfileChanges() + + @pyqtProperty(QObject, fset = setQualityChangesGroup, notify = activeQualityChangesGroupChanged) + def activeQualityChangesGroup(self): + return self._current_quality_changes_group + + @pyqtProperty(str, notify = activeQualityGroupChanged) + def activeQualityOrQualityChangesName(self): + name = self._empty_quality_container.getName() + if self._current_quality_changes_group: + name = self._current_quality_changes_group.name + elif self._current_quality_group: + name = self._current_quality_group.name + return name diff --git a/cura/Settings/MaterialManager.py b/cura/Settings/MaterialManager.py deleted file mode 100644 index 80d2723438..0000000000 --- a/cura/Settings/MaterialManager.py +++ /dev/null @@ -1,57 +0,0 @@ -# Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the LGPLv3 or higher. - -from PyQt5.QtCore import QObject, pyqtSlot #To expose data to QML. - -from cura.Settings.ContainerManager import ContainerManager -from UM.Logger import Logger -from UM.Message import Message #To create a warning message about material diameter. -from UM.i18n import i18nCatalog #Translated strings. - -catalog = i18nCatalog("cura") - -## Handles material-related data, processing requests to change them and -# providing data for the GUI. -# -# TODO: Move material-related managing over from the machine manager to here. -class MaterialManager(QObject): - ## Creates the global values for the material manager to use. - def __init__(self, parent = None): - super().__init__(parent) - - #Material diameter changed warning message. - self._material_diameter_warning_message = Message(catalog.i18nc("@info:status Has a cancel button next to it.", - "The selected material diameter causes the material to become incompatible with the current printer."), title = catalog.i18nc("@info:title", "Incompatible Material")) - self._material_diameter_warning_message.addAction("Undo", catalog.i18nc("@action:button", "Undo"), None, catalog.i18nc("@action", "Undo changing the material diameter.")) - self._material_diameter_warning_message.actionTriggered.connect(self._materialWarningMessageAction) - - ## Creates an instance of the MaterialManager. - # - # This should only be called by PyQt to create the singleton instance of - # this class. - @staticmethod - def createMaterialManager(engine = None, script_engine = None): - return MaterialManager() - - @pyqtSlot(str, str) - def showMaterialWarningMessage(self, material_id, previous_diameter): - self._material_diameter_warning_message.previous_diameter = previous_diameter #Make sure that the undo button can properly undo the action. - self._material_diameter_warning_message.material_id = material_id - self._material_diameter_warning_message.show() - - ## Called when clicking "undo" on the warning dialogue for disappeared - # materials. - # - # This executes the undo action, restoring the material diameter. - # - # \param button The identifier of the button that was pressed. - def _materialWarningMessageAction(self, message, button): - if button == "Undo": - container_manager = ContainerManager.getInstance() - container_manager.setContainerMetaDataEntry(self._material_diameter_warning_message.material_id, "properties/diameter", self._material_diameter_warning_message.previous_diameter) - approximate_previous_diameter = str(round(float(self._material_diameter_warning_message.previous_diameter))) - container_manager.setContainerMetaDataEntry(self._material_diameter_warning_message.material_id, "approximate_diameter", approximate_previous_diameter) - container_manager.setContainerProperty(self._material_diameter_warning_message.material_id, "material_diameter", "value", self._material_diameter_warning_message.previous_diameter); - message.hide() - else: - Logger.log("w", "Unknown button action for material diameter warning message: {action}".format(action = button)) \ No newline at end of file diff --git a/cura/Settings/MaterialSettingsVisibilityHandler.py b/cura/Settings/MaterialSettingsVisibilityHandler.py index 530284991d..ce545f4551 100644 --- a/cura/Settings/MaterialSettingsVisibilityHandler.py +++ b/cura/Settings/MaterialSettingsVisibilityHandler.py @@ -3,6 +3,7 @@ import UM.Settings.Models.SettingVisibilityHandler + class MaterialSettingsVisibilityHandler(UM.Settings.Models.SettingVisibilityHandler.SettingVisibilityHandler): def __init__(self, parent = None, *args, **kwargs): super().__init__(parent = parent, *args, **kwargs) diff --git a/cura/Settings/MaterialsModel.py b/cura/Settings/MaterialsModel.py deleted file mode 100644 index c4b0329336..0000000000 --- a/cura/Settings/MaterialsModel.py +++ /dev/null @@ -1,37 +0,0 @@ -# Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the LGPLv3 or higher. - -from typing import Any, List -from UM.Settings.ContainerRegistry import ContainerRegistry #To listen for changes to the materials. -from UM.Settings.Models.InstanceContainersModel import InstanceContainersModel #We're extending this class. - -## A model that shows a list of currently valid materials. -class MaterialsModel(InstanceContainersModel): - def __init__(self, parent = None): - super().__init__(parent) - - ContainerRegistry.getInstance().containerMetaDataChanged.connect(self._onContainerMetaDataChanged) - - ## Called when the metadata of the container was changed. - # - # This makes sure that we only update when it was a material that changed. - # - # \param container The container whose metadata was changed. - def _onContainerMetaDataChanged(self, container): - if container.getMetaDataEntry("type") == "material": #Only need to update if a material was changed. - self._container_change_timer.start() - - def _onContainerChanged(self, container): - if container.getMetaDataEntry("type", "") == "material": - super()._onContainerChanged(container) - - ## Group brand together - def _sortKey(self, item) -> List[Any]: - result = [] - result.append(item["metadata"]["brand"]) - result.append(item["metadata"]["material"]) - result.append(item["metadata"]["name"]) - result.append(item["metadata"]["color_name"]) - result.append(item["metadata"]["id"]) - result.extend(super()._sortKey(item)) - return result diff --git a/cura/Settings/ProfilesModel.py b/cura/Settings/ProfilesModel.py deleted file mode 100644 index 77cd407457..0000000000 --- a/cura/Settings/ProfilesModel.py +++ /dev/null @@ -1,222 +0,0 @@ -# Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the LGPLv3 or higher. - -from collections import OrderedDict - -from PyQt5.QtCore import Qt - -from UM.Application import Application -from UM.Settings.ContainerRegistry import ContainerRegistry -from UM.Settings.Models.InstanceContainersModel import InstanceContainersModel - -from cura.QualityManager import QualityManager -from cura.Settings.ExtruderManager import ExtruderManager - -from typing import List, TYPE_CHECKING - -if TYPE_CHECKING: - from cura.Settings.ExtruderStack import ExtruderStack - - -## QML Model for listing the current list of valid quality profiles. -# -class ProfilesModel(InstanceContainersModel): - LayerHeightRole = Qt.UserRole + 1001 - LayerHeightWithoutUnitRole = Qt.UserRole + 1002 - AvailableRole = Qt.UserRole + 1003 - - def __init__(self, parent = None): - super().__init__(parent) - self.addRoleName(self.LayerHeightRole, "layer_height") - self.addRoleName(self.LayerHeightWithoutUnitRole, "layer_height_without_unit") - self.addRoleName(self.AvailableRole, "available") - - Application.getInstance().globalContainerStackChanged.connect(self._update) - Application.getInstance().getMachineManager().activeVariantChanged.connect(self._update) - Application.getInstance().getMachineManager().activeStackChanged.connect(self._update) - Application.getInstance().getMachineManager().activeMaterialChanged.connect(self._update) - - self._empty_quality = ContainerRegistry.getInstance().findContainers(id = "empty_quality")[0] - - # Factory function, used by QML - @staticmethod - def createProfilesModel(engine, js_engine): - return ProfilesModel.getInstance() - - ## Get the singleton instance for this class. - @classmethod - def getInstance(cls) -> "ProfilesModel": - # Note: Explicit use of class name to prevent issues with inheritance. - if not ProfilesModel.__instance: - ProfilesModel.__instance = cls() - return ProfilesModel.__instance - - @classmethod - def hasInstance(cls) -> bool: - return ProfilesModel.__instance is not None - - __instance = None # type: "ProfilesModel" - - ## Fetch the list of containers to display. - # - # See UM.Settings.Models.InstanceContainersModel._fetchInstanceContainers(). - def _fetchInstanceContainers(self): - global_container_stack = Application.getInstance().getGlobalContainerStack() - if global_container_stack is None: - return {}, {} - global_stack_definition = global_container_stack.definition - - # Get the list of extruders and place the selected extruder at the front of the list. - extruder_stacks = self._getOrderedExtruderStacksList() - materials = [extruder.material for extruder in extruder_stacks] - - # Fetch the list of usable qualities across all extruders. - # The actual list of quality profiles come from the first extruder in the extruder list. - result = QualityManager.getInstance().findAllUsableQualitiesForMachineAndExtruders(global_container_stack, extruder_stacks) - - # The usable quality types are set - quality_type_set = set([x.getMetaDataEntry("quality_type") for x in result]) - - # Fetch all qualities available for this machine and the materials selected in extruders - all_qualities = QualityManager.getInstance().findAllQualitiesForMachineAndMaterials(global_stack_definition, materials) - - # If in the all qualities there is some of them that are not available due to incompatibility with materials - # we also add it so that they will appear in the slide quality bar. However in recomputeItems will be marked as - # not available so they will be shown in gray - for quality in all_qualities: - if quality.getMetaDataEntry("quality_type") not in quality_type_set: - result.append(quality) - - if len(result) > 1 and self._empty_quality in result: - result.remove(self._empty_quality) - - return {item.getId(): item for item in result}, {} #Only return true profiles for now, no metadata. The quality manager is not able to get only metadata yet. - - ## Re-computes the items in this model, and adds the layer height role. - def _recomputeItems(self): - # Some globals that we can re-use. - global_container_stack = Application.getInstance().getGlobalContainerStack() - if global_container_stack is None: - return - - extruder_stacks = self._getOrderedExtruderStacksList() - container_registry = ContainerRegistry.getInstance() - - # Get a list of usable/available qualities for this machine and material - qualities = QualityManager.getInstance().findAllUsableQualitiesForMachineAndExtruders(global_container_stack, extruder_stacks) - - unit = global_container_stack.getBottom().getProperty("layer_height", "unit") - if not unit: - unit = "" - - # group all quality items according to quality_types, so we know which profile suits the currently - # active machine and material, and later yield the right ones. - tmp_all_quality_items = OrderedDict() - for item in super()._recomputeItems(): - profiles = container_registry.findContainersMetadata(id = item["id"]) - if not profiles or "quality_type" not in profiles[0]: - quality_type = "" - else: - quality_type = profiles[0]["quality_type"] - - if quality_type not in tmp_all_quality_items: - tmp_all_quality_items[quality_type] = {"suitable_container": None, "all_containers": []} - - tmp_all_quality_items[quality_type]["all_containers"].append(item) - if tmp_all_quality_items[quality_type]["suitable_container"] is None: - tmp_all_quality_items[quality_type]["suitable_container"] = item - - # reverse the ordering (finest first, coarsest last) - all_quality_items = OrderedDict() - for key in reversed(tmp_all_quality_items.keys()): - all_quality_items[key] = tmp_all_quality_items[key] - - # First the suitable containers are set in the model - containers = [] - for data_item in all_quality_items.values(): - suitable_item = data_item["suitable_container"] - if suitable_item is not None: - containers.append(suitable_item) - - # Once the suitable containers are collected, the rest of the containers are appended - for data_item in all_quality_items.values(): - for item in data_item["all_containers"]: - if item not in containers: - containers.append(item) - - # Now all the containers are set - for item in containers: - profile = container_registry.findContainers(id = item["id"]) - - # When for some reason there is no profile container in the registry - if not profile: - self._setItemLayerHeight(item, "", "") - item["available"] = False - yield item - continue - - profile = profile[0] - - # When there is a profile but it's an empty quality should. It's shown in the list (they are "Not Supported" profiles) - if profile.getId() == "empty_quality": - self._setItemLayerHeight(item, "", "") - item["available"] = True - yield item - continue - - item["available"] = profile in qualities - - # Easy case: This profile defines its own layer height. - if profile.hasProperty("layer_height", "value"): - self._setItemLayerHeight(item, profile.getProperty("layer_height", "value"), unit) - yield item - continue - - machine_manager = Application.getInstance().getMachineManager() - - # Quality-changes profile that has no value for layer height. Get the corresponding quality profile and ask that profile. - quality_type = profile.getMetaDataEntry("quality_type", None) - if quality_type: - quality_results = machine_manager.determineQualityAndQualityChangesForQualityType(quality_type) - for quality_result in quality_results: - if quality_result["stack"] is global_container_stack: - quality = quality_result["quality"] - break - else: - # No global container stack in the results: - if quality_results: - # Take any of the extruders. - quality = quality_results[0]["quality"] - else: - quality = None - if quality and quality.hasProperty("layer_height", "value"): - self._setItemLayerHeight(item, quality.getProperty("layer_height", "value"), unit) - yield item - continue - - # Quality has no value for layer height either. Get the layer height from somewhere lower in the stack. - skip_until_container = global_container_stack.material - if not skip_until_container or skip_until_container == ContainerRegistry.getInstance().getEmptyInstanceContainer(): # No material in stack. - skip_until_container = global_container_stack.variant - if not skip_until_container or skip_until_container == ContainerRegistry.getInstance().getEmptyInstanceContainer(): # No variant in stack. - skip_until_container = global_container_stack.getBottom() - self._setItemLayerHeight(item, global_container_stack.getRawProperty("layer_height", "value", skip_until_container = skip_until_container.getId()), unit) # Fall through to the currently loaded material. - yield item - - ## Get a list of extruder stacks with the active extruder at the front of the list. - @staticmethod - def _getOrderedExtruderStacksList() -> List["ExtruderStack"]: - extruder_manager = ExtruderManager.getInstance() - extruder_stacks = extruder_manager.getActiveExtruderStacks() - active_extruder = extruder_manager.getActiveExtruderStack() - - if active_extruder in extruder_stacks: - extruder_stacks.remove(active_extruder) - extruder_stacks = [active_extruder] + extruder_stacks - - return extruder_stacks - - @staticmethod - def _setItemLayerHeight(item, value, unit): - item["layer_height"] = str(value) + unit - item["layer_height_without_unit"] = str(value) diff --git a/cura/Settings/QualityAndUserProfilesModel.py b/cura/Settings/QualityAndUserProfilesModel.py deleted file mode 100644 index 645e63acdb..0000000000 --- a/cura/Settings/QualityAndUserProfilesModel.py +++ /dev/null @@ -1,54 +0,0 @@ -# Copyright (c) 2016 Ultimaker B.V. -# Cura is released under the terms of the LGPLv3 or higher. -from UM.Application import Application -from UM.Settings.ContainerRegistry import ContainerRegistry - -from cura.QualityManager import QualityManager -from cura.Settings.ProfilesModel import ProfilesModel -from cura.Settings.ExtruderManager import ExtruderManager - - -## QML Model for listing the current list of valid quality and quality changes profiles. -# -class QualityAndUserProfilesModel(ProfilesModel): - def __init__(self, parent = None): - super().__init__(parent) - - self._empty_quality = ContainerRegistry.getInstance().findInstanceContainers(id = "empty_quality")[0] - - ## Fetch the list of containers to display. - # - # See UM.Settings.Models.InstanceContainersModel._fetchInstanceContainers(). - def _fetchInstanceContainers(self): - global_container_stack = Application.getInstance().getGlobalContainerStack() - if not global_container_stack: - return {}, {} - - # Fetch the list of quality changes. - quality_manager = QualityManager.getInstance() - machine_definition = quality_manager.getParentMachineDefinition(global_container_stack.definition) - quality_changes_list = quality_manager.findAllQualityChangesForMachine(machine_definition) - - extruder_manager = ExtruderManager.getInstance() - active_extruder = extruder_manager.getActiveExtruderStack() - extruder_stacks = self._getOrderedExtruderStacksList() - - # Fetch the list of usable qualities across all extruders. - # The actual list of quality profiles come from the first extruder in the extruder list. - quality_list = quality_manager.findAllUsableQualitiesForMachineAndExtruders(global_container_stack, extruder_stacks) - - # Filter the quality_change by the list of available quality_types - quality_type_set = set([x.getMetaDataEntry("quality_type") for x in quality_list]) - # Also show custom profiles based on "Not Supported" quality profile - quality_type_set.add(self._empty_quality.getMetaDataEntry("quality_type")) - filtered_quality_changes = {qc.getId(): qc for qc in quality_changes_list if - qc.getMetaDataEntry("quality_type") in quality_type_set and - qc.getMetaDataEntry("extruder") is not None and - (qc.getMetaDataEntry("extruder") == active_extruder.definition.getMetaDataEntry("quality_definition") or - qc.getMetaDataEntry("extruder") == active_extruder.definition.getId())} - - result = filtered_quality_changes - for q in quality_list: - if q.getId() != "empty_quality": - result[q.getId()] = q - return result, {} #Only return true profiles for now, no metadata. The quality manager is not able to get only metadata yet. diff --git a/cura/Settings/QualitySettingsModel.py b/cura/Settings/QualitySettingsModel.py deleted file mode 100644 index fb1aa9a6b2..0000000000 --- a/cura/Settings/QualitySettingsModel.py +++ /dev/null @@ -1,249 +0,0 @@ -# Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the LGPLv3 or higher. - -from PyQt5.QtCore import pyqtProperty, pyqtSignal, Qt - -from UM.Logger import Logger -import UM.Qt -from UM.Application import Application -from UM.Settings.ContainerRegistry import ContainerRegistry -import os - -from UM.i18n import i18nCatalog - - -class QualitySettingsModel(UM.Qt.ListModel.ListModel): - KeyRole = Qt.UserRole + 1 - LabelRole = Qt.UserRole + 2 - UnitRole = Qt.UserRole + 3 - ProfileValueRole = Qt.UserRole + 4 - ProfileValueSourceRole = Qt.UserRole + 5 - UserValueRole = Qt.UserRole + 6 - CategoryRole = Qt.UserRole + 7 - - def __init__(self, parent = None): - super().__init__(parent = parent) - - self._container_registry = ContainerRegistry.getInstance() - - self._extruder_id = None - self._extruder_definition_id = None - self._quality_id = None - self._material_id = None - self._i18n_catalog = None - - self.addRoleName(self.KeyRole, "key") - self.addRoleName(self.LabelRole, "label") - self.addRoleName(self.UnitRole, "unit") - self.addRoleName(self.ProfileValueRole, "profile_value") - self.addRoleName(self.ProfileValueSourceRole, "profile_value_source") - self.addRoleName(self.UserValueRole, "user_value") - self.addRoleName(self.CategoryRole, "category") - - self._empty_quality = self._container_registry.findInstanceContainers(id = "empty_quality")[0] - - def setExtruderId(self, extruder_id): - if extruder_id != self._extruder_id: - self._extruder_id = extruder_id - self._update() - self.extruderIdChanged.emit() - - extruderIdChanged = pyqtSignal() - @pyqtProperty(str, fset = setExtruderId, notify = extruderIdChanged) - def extruderId(self): - return self._extruder_id - - def setExtruderDefinition(self, extruder_definition): - if extruder_definition != self._extruder_definition_id: - self._extruder_definition_id = extruder_definition - self._update() - self.extruderDefinitionChanged.emit() - - extruderDefinitionChanged = pyqtSignal() - @pyqtProperty(str, fset = setExtruderDefinition, notify = extruderDefinitionChanged) - def extruderDefinition(self): - return self._extruder_definition_id - - def setQuality(self, quality): - if quality != self._quality_id: - self._quality_id = quality - self._update() - self.qualityChanged.emit() - - qualityChanged = pyqtSignal() - @pyqtProperty(str, fset = setQuality, notify = qualityChanged) - def quality(self): - return self._quality_id - - def setMaterial(self, material): - if material != self._material_id: - self._material_id = material - self._update() - self.materialChanged.emit() - - materialChanged = pyqtSignal() - @pyqtProperty(str, fset = setMaterial, notify = materialChanged) - def material(self): - return self._material_id - - def _update(self): - if not self._quality_id: - return - - items = [] - - definition_container = Application.getInstance().getGlobalContainerStack().getBottom() - - containers = self._container_registry.findInstanceContainers(id = self._quality_id) - if not containers: - Logger.log("w", "Could not find a quality container with id %s", self._quality_id) - return - - quality_container = None - quality_changes_container = None - - if containers[0].getMetaDataEntry("type") == "quality": - quality_container = containers[0] - else: - quality_changes_container = containers[0] - - if quality_changes_container.getMetaDataEntry("quality_type") == self._empty_quality.getMetaDataEntry("quality_type"): - quality_container = self._empty_quality - else: - criteria = { - "type": "quality", - "quality_type": quality_changes_container.getMetaDataEntry("quality_type"), - "definition": quality_changes_container.getDefinition().getId() - } - - quality_container = self._container_registry.findInstanceContainers(**criteria) - if not quality_container: - Logger.log("w", "Could not find a quality container matching quality changes %s", quality_changes_container.getId()) - return - - quality_container = quality_container[0] - - quality_type = quality_container.getMetaDataEntry("quality_type") - - if quality_type == "not_supported": - containers = [] - else: - definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(quality_container.getDefinition()) - definition = quality_container.getDefinition() - - # Check if the definition container has a translation file. - definition_suffix = ContainerRegistry.getMimeTypeForContainer(type(definition)).preferredSuffix - catalog = i18nCatalog(os.path.basename(definition_id + "." + definition_suffix)) - if catalog.hasTranslationLoaded(): - self._i18n_catalog = catalog - - for file_name in quality_container.getDefinition().getInheritedFiles(): - catalog = i18nCatalog(os.path.basename(file_name)) - if catalog.hasTranslationLoaded(): - self._i18n_catalog = catalog - - criteria = {"type": "quality", "quality_type": quality_type, "definition": definition_id} - - if self._material_id and self._material_id != "empty_material": - criteria["material"] = self._material_id - - criteria["extruder"] = self._extruder_id - - containers = self._container_registry.findInstanceContainers(**criteria) - if not containers: - # Try again, this time without extruder - new_criteria = criteria.copy() - new_criteria.pop("extruder") - containers = self._container_registry.findInstanceContainers(**new_criteria) - - if not containers and "material" in criteria: - # Try again, this time without material - criteria.pop("material", None) - containers = self._container_registry.findInstanceContainers(**criteria) - - if not containers: - # Try again, this time without material or extruder - criteria.pop("extruder") # "material" has already been popped - containers = self._container_registry.findInstanceContainers(**criteria) - - if not containers: - Logger.log("w", "Could not find any quality containers matching the search criteria %s" % str(criteria)) - return - - if quality_changes_container: - if quality_type == "not_supported": - criteria = {"type": "quality_changes", "quality_type": quality_type, "name": quality_changes_container.getName()} - else: - criteria = {"type": "quality_changes", "quality_type": quality_type, "definition": definition_id, "name": quality_changes_container.getName()} - if self._extruder_definition_id != "": - extruder_definitions = self._container_registry.findDefinitionContainers(id = self._extruder_definition_id) - if extruder_definitions: - criteria["extruder"] = Application.getInstance().getMachineManager().getQualityDefinitionId(extruder_definitions[0]) - criteria["name"] = quality_changes_container.getName() - else: - criteria["extruder"] = None - - changes = self._container_registry.findInstanceContainers(**criteria) - if changes: - containers.extend(changes) - - global_container_stack = Application.getInstance().getGlobalContainerStack() - - current_category = "" - for definition in definition_container.findDefinitions(): - if definition.type == "category": - current_category = definition.label - if self._i18n_catalog: - current_category = self._i18n_catalog.i18nc(definition.key + " label", definition.label) - continue - - profile_value = None - profile_value_source = "" - for container in containers: - new_value = container.getProperty(definition.key, "value") - - if new_value is not None: - profile_value_source = container.getMetaDataEntry("type") - profile_value = new_value - - # Global tab should use resolve (if there is one) - if not self._extruder_id: - resolve_value = global_container_stack.getProperty(definition.key, "resolve") - if resolve_value is not None and profile_value is not None and profile_value_source != "quality_changes": - profile_value = resolve_value - - user_value = None - if not self._extruder_id: - user_value = global_container_stack.getTop().getProperty(definition.key, "value") - else: - extruder_stack = self._container_registry.findContainerStacks(id = self._extruder_id) - if extruder_stack: - user_value = extruder_stack[0].getTop().getProperty(definition.key, "value") - - if profile_value is None and user_value is None: - continue - - settable_per_extruder = global_container_stack.getProperty(definition.key, "settable_per_extruder") - # If a setting is not settable per extruder (global) and we're looking at an extruder tab, don't show this value. - if self._extruder_id != "" and not settable_per_extruder: - continue - - # If a setting is settable per extruder (not global) and we're looking at global tab, don't show this value. - if self._extruder_id == "" and settable_per_extruder: - continue - - label = definition.label - if self._i18n_catalog: - label = self._i18n_catalog.i18nc(definition.key + " label", label) - - items.append({ - "key": definition.key, - "label": label, - "unit": definition.unit, - "profile_value": "" if profile_value is None else str(profile_value), # it is for display only - "profile_value_source": profile_value_source, - "user_value": "" if user_value is None else str(user_value), - "category": current_category - }) - - self.setItems(items) diff --git a/cura/Settings/SettingOverrideDecorator.py b/cura/Settings/SettingOverrideDecorator.py index b853c06c8e..6e98f014dc 100644 --- a/cura/Settings/SettingOverrideDecorator.py +++ b/cura/Settings/SettingOverrideDecorator.py @@ -3,12 +3,14 @@ import copy +from UM.Scene.Iterator.DepthFirstIterator import DepthFirstIterator from UM.Scene.SceneNodeDecorator import SceneNodeDecorator from UM.Signal import Signal, signalemitter from UM.Settings.InstanceContainer import InstanceContainer from UM.Settings.ContainerRegistry import ContainerRegistry from UM.Logger import Logger - +from UM.Settings.Validator import ValidatorState +from PyQt5.QtCore import QTimer from UM.Application import Application from cura.Settings.PerObjectContainerStack import PerObjectContainerStack @@ -38,6 +40,10 @@ class SettingOverrideDecorator(SceneNodeDecorator): self._extruder_stack = ExtruderManager.getInstance().getExtruderStack(0).getId() self._is_non_printing_mesh = False + self._error_check_timer = QTimer() + self._error_check_timer.setInterval(250) + self._error_check_timer.setSingleShot(True) + self._error_check_timer.timeout.connect(self._checkStackForErrors) self._stack.propertyChanged.connect(self._onSettingChanged) @@ -93,9 +99,21 @@ class SettingOverrideDecorator(SceneNodeDecorator): # Trigger slice/need slicing if the value has changed. if property_name == "value": self._is_non_printing_mesh = any(bool(self._stack.getProperty(setting, "value")) for setting in self._non_printing_mesh_settings) + if not self._is_non_printing_mesh: + # self._error_check_timer.start() + self._checkStackForErrors() + Application.getInstance().getBackend().needsSlicing() + Application.getInstance().getBackend().tickle() - Application.getInstance().getBackend().needsSlicing() - Application.getInstance().getBackend().tickle() + def _checkStackForErrors(self): + hasErrors = False; + for key in self._stack.getAllKeys(): + validation_state = self._stack.getProperty(key, "validationState") + if validation_state in (ValidatorState.Exception, ValidatorState.MaximumError, ValidatorState.MinimumError): + Logger.log("w", "Setting Per Object %s is not valid.", key) + hasErrors = True + break + Application.getInstance().getObjectsModel().setStacksHaveErrors(hasErrors) ## Makes sure that the stack upon which the container stack is placed is # kept up to date. diff --git a/cura/Settings/UserProfilesModel.py b/cura/Settings/UserProfilesModel.py deleted file mode 100644 index 6605f52f8a..0000000000 --- a/cura/Settings/UserProfilesModel.py +++ /dev/null @@ -1,85 +0,0 @@ -# Copyright (c) 2017 Ultimaker B.V. -# Cura is released under the terms of the LGPLv3 or higher. - -from UM.Application import Application -from UM.Settings.ContainerRegistry import ContainerRegistry - -from cura.QualityManager import QualityManager -from cura.Settings.ProfilesModel import ProfilesModel -from cura.Settings.ExtruderManager import ExtruderManager - -## QML Model for listing the current list of valid quality changes profiles. -# -class UserProfilesModel(ProfilesModel): - def __init__(self, parent = None): - super().__init__(parent) - - #Need to connect to the metaDataChanged signal of the active materials. - self.__current_extruders = [] - self.__current_materials = [] - - Application.getInstance().getExtruderManager().extrudersChanged.connect(self.__onExtrudersChanged) - self.__onExtrudersChanged() - self.__current_materials = [extruder.material for extruder in self.__current_extruders] - for material in self.__current_materials: - material.metaDataChanged.connect(self._onContainerChanged) - - self._empty_quality = ContainerRegistry.getInstance().findContainers(id = "empty_quality")[0] - - ## Fetch the list of containers to display. - # - # See UM.Settings.Models.InstanceContainersModel._fetchInstanceContainers(). - def _fetchInstanceContainers(self): - global_container_stack = Application.getInstance().getGlobalContainerStack() - if not global_container_stack: - return {}, {} - - # Fetch the list of quality changes. - quality_manager = QualityManager.getInstance() - machine_definition = quality_manager.getParentMachineDefinition(global_container_stack.definition) - quality_changes_list = quality_manager.findAllQualityChangesForMachine(machine_definition) - - extruder_manager = ExtruderManager.getInstance() - active_extruder = extruder_manager.getActiveExtruderStack() - extruder_stacks = self._getOrderedExtruderStacksList() - - # Fetch the list of usable qualities across all extruders. - # The actual list of quality profiles come from the first extruder in the extruder list. - quality_list = quality_manager.findAllUsableQualitiesForMachineAndExtruders(global_container_stack, extruder_stacks) - - # Filter the quality_change by the list of available quality_types - quality_type_set = set([x.getMetaDataEntry("quality_type") for x in quality_list]) - quality_type_set.add(self._empty_quality.getMetaDataEntry("quality_type")) - - filtered_quality_changes = {qc.getId():qc for qc in quality_changes_list if - qc.getMetaDataEntry("quality_type") in quality_type_set and - qc.getMetaDataEntry("extruder") is not None and - (qc.getMetaDataEntry("extruder") == active_extruder.definition.getMetaDataEntry("quality_definition") or - qc.getMetaDataEntry("extruder") == active_extruder.definition.getId())} - - return filtered_quality_changes, {} #Only return true profiles for now, no metadata. The quality manager is not able to get only metadata yet. - - ## Called when a container changed on an extruder stack. - # - # If it's the material we need to connect to the metaDataChanged signal of - # that. - def __onContainerChanged(self, new_container): - #Careful not to update when a quality or quality changes profile changed! - #If you then update you're going to have an infinite recursion because the update may change the container. - if new_container.getMetaDataEntry("type") == "material": - for material in self.__current_materials: - material.metaDataChanged.disconnect(self._onContainerChanged) - self.__current_materials = [extruder.material for extruder in self.__current_extruders] - for material in self.__current_materials: - material.metaDataChanged.connect(self._onContainerChanged) - - ## Called when the current set of extruders change. - # - # This makes sure that we are listening to the signal for when the - # materials change. - def __onExtrudersChanged(self): - for extruder in self.__current_extruders: - extruder.containersChanged.disconnect(self.__onContainerChanged) - self.__current_extruders = Application.getInstance().getExtruderManager().getExtruderStacks() - for extruder in self.__current_extruders: - extruder.containersChanged.connect(self.__onContainerChanged) \ No newline at end of file diff --git a/plugins/3MFReader/ThreeMFReader.py b/plugins/3MFReader/ThreeMFReader.py index 1726818100..ec590a0212 100755 --- a/plugins/3MFReader/ThreeMFReader.py +++ b/plugins/3MFReader/ThreeMFReader.py @@ -4,26 +4,28 @@ import os.path import zipfile +import numpy + +import Savitar + +from UM.Application import Application from UM.Logger import Logger from UM.Math.Matrix import Matrix from UM.Math.Vector import Vector from UM.Mesh.MeshBuilder import MeshBuilder from UM.Mesh.MeshReader import MeshReader from UM.Scene.GroupDecorator import GroupDecorator + from cura.Settings.SettingOverrideDecorator import SettingOverrideDecorator -from UM.Application import Application from cura.Settings.ExtruderManager import ExtruderManager -from cura.QualityManager import QualityManager from cura.Scene.CuraSceneNode import CuraSceneNode from cura.Scene.BuildPlateDecorator import BuildPlateDecorator from cura.Scene.SliceableObjectDecorator import SliceableObjectDecorator from cura.Scene.ZOffsetDecorator import ZOffsetDecorator +from cura.Machines.QualityManager import getMachineDefinitionIDForQualitySearch MYPY = False -import Savitar -import numpy - try: if not MYPY: import xml.etree.cElementTree as ET @@ -77,7 +79,7 @@ class ThreeMFReader(MeshReader): self._object_count += 1 node_name = "Object %s" % self._object_count - active_build_plate = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate um_node = CuraSceneNode() um_node.addDecorator(BuildPlateDecorator(active_build_plate)) @@ -120,8 +122,8 @@ class ThreeMFReader(MeshReader): um_node.callDecoration("setActiveExtruder", default_stack.getId()) # Get the definition & set it - definition = QualityManager.getInstance().getParentMachineDefinition(global_container_stack.getBottom()) - um_node.callDecoration("getStack").getTop().setDefinition(definition.getId()) + definition_id = getMachineDefinitionIDForQualitySearch(global_container_stack) + um_node.callDecoration("getStack").getTop().setDefinition(definition_id) setting_container = um_node.callDecoration("getStack").getTop() diff --git a/plugins/3MFReader/ThreeMFWorkspaceReader.py b/plugins/3MFReader/ThreeMFWorkspaceReader.py index 35c56a2a14..cbe882f253 100755 --- a/plugins/3MFReader/ThreeMFWorkspaceReader.py +++ b/plugins/3MFReader/ThreeMFWorkspaceReader.py @@ -23,7 +23,6 @@ from cura.Settings.ExtruderManager import ExtruderManager from cura.Settings.ExtruderStack import ExtruderStack from cura.Settings.GlobalStack import GlobalStack from cura.Settings.CuraContainerStack import _ContainerIndexes -from cura.QualityManager import QualityManager from cura.CuraApplication import CuraApplication from configparser import ConfigParser @@ -855,10 +854,11 @@ class ThreeMFWorkspaceReader(WorkspaceReader): if machine_extruder_count is not None: extruder_stacks_in_use = extruder_stacks[:machine_extruder_count] - available_quality = QualityManager.getInstance().findAllUsableQualitiesForMachineAndExtruders(global_stack, - extruder_stacks_in_use) + quality_manager = CuraApplication.getInstance()._quality_manager + all_quality_groups = quality_manager.getQualityGroups(global_stack) + available_quality_types = [qt for qt, qg in all_quality_groups.items() if qg.is_available] if not has_not_supported: - has_not_supported = not available_quality + has_not_supported = not available_quality_types quality_has_been_changed = False @@ -872,8 +872,6 @@ class ThreeMFWorkspaceReader(WorkspaceReader): # The machine in the project has non-empty quality and there are usable qualities for this machine. # We need to check if the current quality_type is still usable for this machine, if not, then the quality # will be reset to the "preferred quality" if present, otherwise "normal". - available_quality_types = [q.getMetaDataEntry("quality_type") for q in available_quality] - if global_stack.quality.getMetaDataEntry("quality_type") not in available_quality_types: # We are here because the quality_type specified in the project is not supported any more, # so we need to switch it to the "preferred quality" if present, otherwise "normal". @@ -947,7 +945,7 @@ class ThreeMFWorkspaceReader(WorkspaceReader): for extruder_stack in extruder_stacks_in_use: # If the quality is different in the stacks, then the quality in the global stack is trusted - if extruder_stack.quality.getMetaDataEntry("quality_type", None) != global_stack.quality.getMetaDataEntry("quality_type", None): + if extruder_stack.quality.getMetaDataEntry("quality_type") != global_stack.quality.getMetaDataEntry("quality_type"): search_criteria = {"id": global_stack.quality.getId(), "type": "quality", "definition": definition_id} @@ -1084,10 +1082,13 @@ class ThreeMFWorkspaceReader(WorkspaceReader): CuraApplication.getInstance().getMachineManager().activeQualityChanged.emit() # Actually change the active machine. - Application.getInstance().setGlobalContainerStack(global_stack) - - # Notify everything/one that is to notify about changes. - global_stack.containersChanged.emit(global_stack.getTop()) + # + # This is scheduled for later is because it depends on the Variant/Material/Qualitiy Managers to have the latest + # data, but those managers will only update upon a container/container metadata changed signal. Because this + # function is running on the main thread (Qt thread), although those "changed" signals have been emitted, but + # they won't take effect until this function is done. + # To solve this, we schedule _updateActiveMachine() for later so it will have the latest data. + CuraApplication.getInstance().callLater(self._updateActiveMachine, global_stack) # Load all the nodes / meshdata of the workspace nodes = self._3mf_mesh_reader.read(file_name) @@ -1100,6 +1101,14 @@ class ThreeMFWorkspaceReader(WorkspaceReader): self.setWorkspaceName(base_file_name) return nodes + def _updateActiveMachine(self, global_stack): + # Actually change the active machine. + machine_manager = Application.getInstance().getMachineManager() + machine_manager.setActiveMachine(global_stack.getId()) + + # Notify everything/one that is to notify about changes. + global_stack.containersChanged.emit(global_stack.getTop()) + ## HACK: Replaces the material container in the given stack with a newly created material container. # This function is used when the user chooses to resolve material conflicts by creating new ones. def _replaceStackMaterialWithNew(self, stack, old_new_material_dict): diff --git a/plugins/3MFWriter/ThreeMFWriter.py b/plugins/3MFWriter/ThreeMFWriter.py index c4b7035cf1..ff6333763a 100644 --- a/plugins/3MFWriter/ThreeMFWriter.py +++ b/plugins/3MFWriter/ThreeMFWriter.py @@ -68,7 +68,7 @@ class ThreeMFWriter(MeshWriter): if not isinstance(um_node, SceneNode): return None - active_build_plate_nr = CuraApplication.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate_nr = CuraApplication.getInstance().getMultiBuildPlateModel().activeBuildPlate if um_node.callDecoration("getBuildPlateNumber") != active_build_plate_nr: return diff --git a/plugins/CuraEngineBackend/CuraEngineBackend.py b/plugins/CuraEngineBackend/CuraEngineBackend.py index 79fa12114f..3982a0ad06 100755 --- a/plugins/CuraEngineBackend/CuraEngineBackend.py +++ b/plugins/CuraEngineBackend/CuraEngineBackend.py @@ -70,7 +70,7 @@ class CuraEngineBackend(QObject, Backend): # Workaround to disable layer view processing if layer view is not active. self._layer_view_active = False Application.getInstance().getController().activeViewChanged.connect(self._onActiveViewChanged) - Application.getInstance().getBuildPlateModel().activeBuildPlateChanged.connect(self._onActiveViewChanged) + Application.getInstance().getMultiBuildPlateModel().activeBuildPlateChanged.connect(self._onActiveViewChanged) self._onActiveViewChanged() self._stored_layer_data = [] self._stored_optimized_layer_data = {} # key is build plate number, then arrays are stored until they go to the ProcessSlicesLayersJob @@ -88,7 +88,6 @@ class CuraEngineBackend(QObject, Backend): # self._global_container_stack = None Application.getInstance().globalContainerStackChanged.connect(self._onGlobalStackChanged) - Application.getInstance().getExtruderManager().extrudersAdded.connect(self._onGlobalStackChanged) self._onGlobalStackChanged() Application.getInstance().stacksValidationFinished.connect(self._onStackErrorCheckFinished) @@ -207,7 +206,7 @@ class CuraEngineBackend(QObject, Backend): self._scene.gcode_dict = {} # see if we really have to slice - active_build_plate = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate build_plate_to_be_sliced = self._build_plates_to_be_sliced.pop(0) Logger.log("d", "Going to slice build plate [%s]!" % build_plate_to_be_sliced) num_objects = self._numObjects() @@ -497,7 +496,7 @@ class CuraEngineBackend(QObject, Backend): node.getParent().removeChild(node) def markSliceAll(self): - for build_plate_number in range(Application.getInstance().getBuildPlateModel().maxBuildPlate + 1): + for build_plate_number in range(Application.getInstance().getMultiBuildPlateModel().maxBuildPlate + 1): if build_plate_number not in self._build_plates_to_be_sliced: self._build_plates_to_be_sliced.append(build_plate_number) @@ -582,7 +581,7 @@ class CuraEngineBackend(QObject, Backend): Logger.log("d", "Slicing took %s seconds", time() - self._slice_start_time ) # See if we need to process the sliced layers job. - active_build_plate = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate if self._layer_view_active and (self._process_layers_job is None or not self._process_layers_job.isRunning()) and active_build_plate == self._start_slice_job_build_plate: self._startProcessSlicedLayersJob(active_build_plate) # self._onActiveViewChanged() @@ -702,7 +701,7 @@ class CuraEngineBackend(QObject, Backend): application = Application.getInstance() view = application.getController().getActiveView() if view: - active_build_plate = application.getBuildPlateModel().activeBuildPlate + active_build_plate = application.getMultiBuildPlateModel().activeBuildPlate if view.getPluginId() == "SimulationView": # If switching to layer view, we should process the layers if that hasn't been done yet. self._layer_view_active = True # There is data and we're not slicing at the moment diff --git a/plugins/CuraEngineBackend/ProcessGCodeJob.py b/plugins/CuraEngineBackend/ProcessGCodeJob.py index ed430f8fa9..817daa9f85 100644 --- a/plugins/CuraEngineBackend/ProcessGCodeJob.py +++ b/plugins/CuraEngineBackend/ProcessGCodeJob.py @@ -12,6 +12,6 @@ class ProcessGCodeLayerJob(Job): self._message = message def run(self): - active_build_plate_id = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate_id = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate gcode_list = self._scene.gcode_dict[active_build_plate_id] gcode_list.append(self._message.data.decode("utf-8", "replace")) diff --git a/plugins/CuraEngineBackend/StartSliceJob.py b/plugins/CuraEngineBackend/StartSliceJob.py index b19c387a14..8b7205f8b2 100644 --- a/plugins/CuraEngineBackend/StartSliceJob.py +++ b/plugins/CuraEngineBackend/StartSliceJob.py @@ -136,6 +136,11 @@ class StartSliceJob(Job): self.setResult(StartJobResult.MaterialIncompatible) return + # Validate settings per selectable model + if Application.getInstance().getObjectsModel().stacksHaveErrors(): + self.setResult(StartJobResult.ObjectSettingError) + return + # Don't slice if there is a per object setting with an error value. for node in DepthFirstIterator(self._scene.getRoot()): if node.isSelectable(): diff --git a/plugins/GCodeReader/FlavorParser.py b/plugins/GCodeReader/FlavorParser.py index f63ba3ca69..c064ffbf10 100644 --- a/plugins/GCodeReader/FlavorParser.py +++ b/plugins/GCodeReader/FlavorParser.py @@ -437,7 +437,7 @@ class FlavorParser: scene_node.addDecorator(gcode_list_decorator) # gcode_dict stores gcode_lists for a number of build plates. - active_build_plate_id = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate_id = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate gcode_dict = {active_build_plate_id: gcode_list} Application.getInstance().getController().getScene().gcode_dict = gcode_dict diff --git a/plugins/GCodeWriter/GCodeWriter.py b/plugins/GCodeWriter/GCodeWriter.py index 225800454f..1b3b7264a1 100644 --- a/plugins/GCodeWriter/GCodeWriter.py +++ b/plugins/GCodeWriter/GCodeWriter.py @@ -60,7 +60,7 @@ class GCodeWriter(MeshWriter): Logger.log("e", "GCodeWriter does not support non-text mode.") return False - active_build_plate = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate scene = Application.getInstance().getController().getScene() gcode_dict = getattr(scene, "gcode_dict") if not gcode_dict: diff --git a/plugins/PerObjectSettingsTool/PerObjectItem.qml b/plugins/PerObjectSettingsTool/PerObjectItem.qml index 559ad2bf81..1317c00b19 100644 --- a/plugins/PerObjectSettingsTool/PerObjectItem.qml +++ b/plugins/PerObjectSettingsTool/PerObjectItem.qml @@ -25,7 +25,20 @@ UM.TooltipArea onClicked: { - addedSettingsModel.setVisible(model.key, checked); + // Important first set visible and then subscribe + // otherwise the setting is not yet in list + // For unsubscribe is important first remove the subscription and then + // set as invisible + if(checked) + { + addedSettingsModel.setVisible(model.key, checked); + UM.ActiveTool.triggerActionWithData("subscribeForSettingValidation", model.key) + } + else + { + UM.ActiveTool.triggerActionWithData("unsubscribeForSettingValidation", model.key) + addedSettingsModel.setVisible(model.key, checked); + } UM.ActiveTool.forceUpdate(); } } diff --git a/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml b/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml index 03a2ce1bf4..e72e1224df 100644 --- a/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml +++ b/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml @@ -240,7 +240,10 @@ Item { width: Math.round(UM.Theme.getSize("setting").height / 2) height: UM.Theme.getSize("setting").height - onClicked: addedSettingsModel.setVisible(model.key, false) + onClicked: { + addedSettingsModel.setVisible(model.key, false) + UM.ActiveTool.triggerActionWithData("unsubscribeForSettingValidation", model.key) + } style: ButtonStyle { diff --git a/plugins/PerObjectSettingsTool/PerObjectSettingsTool.py b/plugins/PerObjectSettingsTool/PerObjectSettingsTool.py index d2db5ff420..b671db48fb 100644 --- a/plugins/PerObjectSettingsTool/PerObjectSettingsTool.py +++ b/plugins/PerObjectSettingsTool/PerObjectSettingsTool.py @@ -10,7 +10,10 @@ from cura.Settings.SettingOverrideDecorator import SettingOverrideDecorator from cura.Settings.ExtruderManager import ExtruderManager from UM.Settings.SettingInstance import SettingInstance from UM.Event import Event +from UM.Settings.Validator import ValidatorState +from UM.Logger import Logger +from PyQt5.QtCore import QTimer ## This tool allows the user to add & change settings per node in the scene. # The settings per object are kept in a ContainerStack, which is linked to a node by decorator. @@ -34,6 +37,12 @@ class PerObjectSettingsTool(Tool): self._onGlobalContainerChanged() Selection.selectionChanged.connect(self._updateEnabled) + self._scene = Application.getInstance().getController().getScene() + + self._error_check_timer = QTimer() + self._error_check_timer.setInterval(250) + self._error_check_timer.setSingleShot(True) + self._error_check_timer.timeout.connect(self._updateStacksHaveErrors) def event(self, event): super().event(event) @@ -142,3 +151,65 @@ class PerObjectSettingsTool(Tool): else: self._single_model_selected = True Application.getInstance().getController().toolEnabledChanged.emit(self._plugin_id, self._advanced_mode and self._single_model_selected) + + + def _onPropertyChanged(self, key: str, property_name: str) -> None: + if property_name == "validationState": + # self._error_check_timer.start() + return + + def _updateStacksHaveErrors(self) -> None: + return + # self._checkStacksHaveErrors() + + + def _checkStacksHaveErrors(self): + + for node in DepthFirstIterator(self._scene.getRoot()): + + # valdiate only objects which can be selected because the settings per object + # can be applied only for them + if not node.isSelectable(): + continue + + hasErrors = self._checkStackForErrors(node.callDecoration("getStack")) + Application.getInstance().getObjectsModel().setStacksHaveErrors(hasErrors) + + #If any of models has an error then no reason check next objects on the build plate + if hasErrors: + break + + + def _checkStackForErrors(self, stack): + print("checking for errors") + if stack is None: + return False + + for key in stack.getAllKeys(): + validation_state = stack.getProperty(key, "validationState") + if validation_state in (ValidatorState.Exception, ValidatorState.MaximumError, ValidatorState.MinimumError): + Logger.log("w", "Setting Per Object %s is not valid.", key) + return True + return False + + def subscribeForSettingValidation(self, setting_name): + selected_object = Selection.getSelectedObject(0) + stack = selected_object.callDecoration("getStack") # Don't try to get the active extruder since it may be None anyway. + if not stack: + return "" + + settings = stack.getTop() + setting_instance = settings.getInstance(setting_name) + if setting_instance: + setting_instance.propertyChanged.connect(self._onPropertyChanged) + + def unsubscribeForSettingValidation(self, setting_name): + selected_object = Selection.getSelectedObject(0) + stack = selected_object.callDecoration("getStack") # Don't try to get the active extruder since it may be None anyway. + if not stack: + return "" + + settings = stack.getTop() + setting_instance = settings.getInstance(setting_name) + if setting_instance: + setting_instance.propertyChanged.disconnect(self._onPropertyChanged) diff --git a/plugins/PostProcessingPlugin/PostProcessingPlugin.py b/plugins/PostProcessingPlugin/PostProcessingPlugin.py index f491afbec0..566b05abf3 100644 --- a/plugins/PostProcessingPlugin/PostProcessingPlugin.py +++ b/plugins/PostProcessingPlugin/PostProcessingPlugin.py @@ -62,7 +62,7 @@ class PostProcessingPlugin(QObject, Extension): return # get gcode list for the active build plate - active_build_plate_id = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate_id = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate gcode_list = gcode_dict[active_build_plate_id] if not gcode_list: return diff --git a/plugins/SimulationView/SimulationPass.py b/plugins/SimulationView/SimulationPass.py index 76d7127534..cd0eda2929 100644 --- a/plugins/SimulationView/SimulationPass.py +++ b/plugins/SimulationView/SimulationPass.py @@ -93,7 +93,7 @@ class SimulationPass(RenderPass): self.bind() tool_handle_batch = RenderBatch(self._tool_handle_shader, type = RenderBatch.RenderType.Overlay, backface_cull = True) - active_build_plate = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate head_position = None # Indicates the current position of the print head nozzle_node = None diff --git a/plugins/SupportEraser/SupportEraser.py b/plugins/SupportEraser/SupportEraser.py index 4e55702687..8b3ad0f4dd 100644 --- a/plugins/SupportEraser/SupportEraser.py +++ b/plugins/SupportEraser/SupportEraser.py @@ -45,7 +45,7 @@ class SupportEraser(Tool): move_vector = Vector(0, 5, 0) node.setPosition(move_vector) - active_build_plate = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate node.addDecorator(SettingOverrideDecorator()) node.addDecorator(BuildPlateDecorator(active_build_plate)) diff --git a/plugins/UM3NetworkPrinting/ClusterUM3OutputDevice.py b/plugins/UM3NetworkPrinting/ClusterUM3OutputDevice.py index 26b445ef90..c0d538bb78 100644 --- a/plugins/UM3NetworkPrinting/ClusterUM3OutputDevice.py +++ b/plugins/UM3NetworkPrinting/ClusterUM3OutputDevice.py @@ -77,11 +77,14 @@ class ClusterUM3OutputDevice(NetworkedPrinterOutputDevice): self._cluster_size = int(properties.get(b"cluster_size", 0)) + self._latest_reply_handler = None + + def requestWrite(self, nodes, file_name=None, filter_by_machine=False, file_handler=None, **kwargs): self.writeStarted.emit(self) gcode_dict = getattr(Application.getInstance().getController().getScene(), "gcode_dict", []) - active_build_plate_id = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate_id = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate gcode_list = gcode_dict[active_build_plate_id] if not gcode_list: @@ -147,7 +150,7 @@ class ClusterUM3OutputDevice(NetworkedPrinterOutputDevice): parts.append(self._createFormPart("name=\"file\"; filename=\"%s\"" % file_name, compressed_gcode)) - self.postFormWithParts("print_jobs/", parts, onFinished=self._onPostPrintJobFinished, onProgress=self._onUploadPrintJobProgress) + self._latest_reply_handler = self.postFormWithParts("print_jobs/", parts, onFinished=self._onPostPrintJobFinished, onProgress=self._onUploadPrintJobProgress) @pyqtProperty(QObject, notify=activePrinterChanged) def activePrinter(self) -> Optional["PrinterOutputModel"]: @@ -187,6 +190,12 @@ class ClusterUM3OutputDevice(NetworkedPrinterOutputDevice): self._sending_gcode = False Application.getInstance().getController().setActiveStage("PrepareStage") + # After compressing the sliced model Cura sends data to printer, to stop receiving updates from the request + # the "reply" should be disconnected + if self._latest_reply_handler: + self._latest_reply_handler.disconnect() + + @pyqtSlot() def openPrintJobControlPanel(self): Logger.log("d", "Opening print job control panel...") @@ -396,7 +405,7 @@ class ClusterUM3OutputDevice(NetworkedPrinterOutputDevice): color = material_data["color"] brand = material_data["brand"] material_type = material_data["material"] - name = "Unknown" + name = "Empty" if material_data["material"] == "empty" else "Unknown" material = MaterialOutputModel(guid=material_data["guid"], type=material_type, brand=brand, color=color, name=name) diff --git a/plugins/UM3NetworkPrinting/LegacyUM3OutputDevice.py b/plugins/UM3NetworkPrinting/LegacyUM3OutputDevice.py index 87d4b9ec0a..42f00beceb 100644 --- a/plugins/UM3NetworkPrinting/LegacyUM3OutputDevice.py +++ b/plugins/UM3NetworkPrinting/LegacyUM3OutputDevice.py @@ -184,7 +184,7 @@ class LegacyUM3OutputDevice(NetworkedPrinterOutputDevice): self.writeStarted.emit(self) gcode_dict = getattr(Application.getInstance().getController().getScene(), "gcode_dict", []) - active_build_plate_id = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate_id = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate gcode_list = gcode_dict[active_build_plate_id] if not gcode_list: diff --git a/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml b/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml index 63b374e6b9..54a34fae46 100644 --- a/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml +++ b/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml @@ -264,6 +264,7 @@ Rectangle case "wait_for_configuration": return catalog.i18nc("@label:status", "Reserved") case "wait_cleanup": + case "wait_user_action": return catalog.i18nc("@label:status", "Finished") case "pre_print": case "sent_to_printer": @@ -278,6 +279,7 @@ Rectangle case "aborted": return catalog.i18nc("@label:status", "Print aborted"); default: + // If print job has unknown status show printer.status return printerStatusText(printer); } } diff --git a/plugins/USBPrinting/USBPrinterOutputDevice.py b/plugins/USBPrinting/USBPrinterOutputDevice.py index b53f502d81..6e2b5153db 100644 --- a/plugins/USBPrinting/USBPrinterOutputDevice.py +++ b/plugins/USBPrinting/USBPrinterOutputDevice.py @@ -99,7 +99,7 @@ class USBPrinterOutputDevice(PrinterOutputDevice): Application.getInstance().getController().setActiveStage("MonitorStage") # find the G-code for the active build plate to print - active_build_plate_id = Application.getInstance().getBuildPlateModel().activeBuildPlate + active_build_plate_id = Application.getInstance().getMultiBuildPlateModel().activeBuildPlate gcode_dict = getattr(Application.getInstance().getController().getScene(), "gcode_dict") gcode_list = gcode_dict[active_build_plate_id] diff --git a/plugins/VersionUpgrade/VersionUpgrade30to31/VersionUpgrade30to31.py b/plugins/VersionUpgrade/VersionUpgrade30to31/VersionUpgrade30to31.py index d7b2c1a001..a88ff5ac1c 100644 --- a/plugins/VersionUpgrade/VersionUpgrade30to31/VersionUpgrade30to31.py +++ b/plugins/VersionUpgrade/VersionUpgrade30to31/VersionUpgrade30to31.py @@ -3,14 +3,9 @@ import configparser #To parse preference files. import io #To serialise the preference files afterwards. -import os -from urllib.parse import quote_plus -from UM.Resources import Resources from UM.VersionUpgrade import VersionUpgrade #We're inheriting from this. -from cura.CuraApplication import CuraApplication - # a list of all legacy "Not Supported" quality profiles _OLD_NOT_SUPPORTED_PROFILES = [ @@ -130,7 +125,6 @@ class VersionUpgrade30to31(VersionUpgrade): parser.write(output) return [filename], [output.getvalue()] - ## Upgrades a container stack from version 3.0 to 3.1. # # \param serialised The serialised form of a container stack. @@ -172,71 +166,3 @@ class VersionUpgrade30to31(VersionUpgrade): output = io.StringIO() parser.write(output) return [filename], [output.getvalue()] - - def _getSingleExtrusionMachineQualityChanges(self, quality_changes_container): - quality_changes_dir = Resources.getPath(CuraApplication.ResourceTypes.QualityInstanceContainer) - quality_changes_containers = [] - - for item in os.listdir(quality_changes_dir): - file_path = os.path.join(quality_changes_dir, item) - if not os.path.isfile(file_path): - continue - - parser = configparser.ConfigParser(interpolation = None) - try: - parser.read([file_path]) - except: - # skip, it is not a valid stack file - continue - - if not parser.has_option("metadata", "type"): - continue - if "quality_changes" != parser["metadata"]["type"]: - continue - - if not parser.has_option("general", "name"): - continue - if quality_changes_container["general"]["name"] != parser["general"]["name"]: - continue - - quality_changes_containers.append(parser) - - return quality_changes_containers - - def _createExtruderQualityChangesForSingleExtrusionMachine(self, filename, global_quality_changes): - suffix = "_" + quote_plus(global_quality_changes["general"]["name"].lower()) - machine_name = os.path.os.path.basename(filename).replace(".inst.cfg", "").replace(suffix, "") - - # Why is this here?! - # When we load a .curaprofile file the deserialize will trigger a version upgrade, creating a dangling file. - # This file can be recognized by it's lack of a machine name in the target filename. - # So when we detect that situation here, we don't create the file and return. - if machine_name == "": - return - - new_filename = machine_name + "_" + "fdmextruder" + suffix - - extruder_quality_changes_parser = configparser.ConfigParser(interpolation = None) - extruder_quality_changes_parser.add_section("general") - extruder_quality_changes_parser["general"]["version"] = str(2) - extruder_quality_changes_parser["general"]["name"] = global_quality_changes["general"]["name"] - extruder_quality_changes_parser["general"]["definition"] = global_quality_changes["general"]["definition"] - - # check renamed definition - if extruder_quality_changes_parser["general"]["definition"] in _RENAMED_DEFINITION_DICT: - extruder_quality_changes_parser["general"]["definition"] = _RENAMED_DEFINITION_DICT[extruder_quality_changes_parser["general"]["definition"]] - - extruder_quality_changes_parser.add_section("metadata") - extruder_quality_changes_parser["metadata"]["quality_type"] = global_quality_changes["metadata"]["quality_type"] - extruder_quality_changes_parser["metadata"]["type"] = global_quality_changes["metadata"]["type"] - extruder_quality_changes_parser["metadata"]["setting_version"] = str(4) - extruder_quality_changes_parser["metadata"]["extruder"] = "fdmextruder" - - extruder_quality_changes_output = io.StringIO() - extruder_quality_changes_parser.write(extruder_quality_changes_output) - extruder_quality_changes_filename = quote_plus(new_filename) + ".inst.cfg" - - quality_changes_dir = Resources.getPath(CuraApplication.ResourceTypes.QualityInstanceContainer) - - with open(os.path.join(quality_changes_dir, extruder_quality_changes_filename), "w", encoding = "utf-8") as f: - f.write(extruder_quality_changes_output.getvalue()) diff --git a/plugins/XmlMaterialProfile/XmlMaterialProfile.py b/plugins/XmlMaterialProfile/XmlMaterialProfile.py index f0d016025e..edc782cc9e 100644 --- a/plugins/XmlMaterialProfile/XmlMaterialProfile.py +++ b/plugins/XmlMaterialProfile/XmlMaterialProfile.py @@ -48,18 +48,35 @@ class XmlMaterialProfile(InstanceContainer): ## Overridden from InstanceContainer # set the meta data for all machine / variant combinations - def setMetaDataEntry(self, key, value): + # + # The "apply_to_all" flag indicates whether this piece of metadata should be applied to all material containers + # or just this specific container. + # For example, when you change the material name, you want to apply it to all its derived containers, but for + # some specific settings, they should only be applied to a machine/variant-specific container. + # + def setMetaDataEntry(self, key, value, apply_to_all = True): registry = ContainerRegistry.getInstance() if registry.isReadOnly(self.getId()): return - super().setMetaDataEntry(key, value) + # Prevent recursion + if not apply_to_all: + super().setMetaDataEntry(key, value) + return - basefile = self.getMetaDataEntry("base_file", self.getId()) #if basefile is self.getId, this is a basefile. - # Update all containers that share basefile - for container in registry.findInstanceContainers(base_file = basefile): - if container.getMetaDataEntry(key, None) != value: # Prevent recursion - container.setMetaDataEntry(key, value) + # Get the MaterialGroup + material_manager = CuraApplication.getInstance().getMaterialManager() + root_material_id = self.getMetaDataEntry("base_file") #if basefile is self.getId, this is a basefile. + material_group = material_manager.getMaterialGroup(root_material_id) + + # Update the root material container + root_material_container = material_group.root_material_node.getContainer() + root_material_container.setMetaDataEntry(key, value, apply_to_all = False) + + # Update all containers derived from it + for node in material_group.derived_material_node_list: + container = node.getContainer() + container.setMetaDataEntry(key, value, apply_to_all = False) ## Overridden from InstanceContainer, similar to setMetaDataEntry. # without this function the setName would only set the name of the specific nozzle / material / machine combination container @@ -190,6 +207,8 @@ class XmlMaterialProfile(InstanceContainer): machine_container_map = {} machine_nozzle_map = {} + variant_manager = CuraApplication.getInstance()._variant_manager + all_containers = registry.findInstanceContainers(GUID = self.getMetaDataEntry("GUID"), base_file = self.getId()) for container in all_containers: definition_id = container.getDefinition().getId() @@ -202,9 +221,10 @@ class XmlMaterialProfile(InstanceContainer): if definition_id not in machine_nozzle_map: machine_nozzle_map[definition_id] = {} - variant = container.getMetaDataEntry("variant") - if variant: - machine_nozzle_map[definition_id][variant] = container + variant_name = container.getMetaDataEntry("variant_name") + if variant_name: + machine_nozzle_map[definition_id][variant_name] = variant_manager.getVariantNode(definition_id, + variant_name) continue machine_container_map[definition_id] = container @@ -236,16 +256,12 @@ class XmlMaterialProfile(InstanceContainer): self._addSettingElement(builder, instance) # Find all hotend sub-profiles corresponding to this material and machine and add them to this profile. - for hotend_id, hotend in machine_nozzle_map[definition_id].items(): - variant_containers = registry.findInstanceContainersMetadata(id = hotend.getMetaDataEntry("variant")) - if not variant_containers: - continue - + for hotend_name, variant_node in machine_nozzle_map[definition_id].items(): # The hotend identifier is not the containers name, but its "name". - builder.start("hotend", {"id": variant_containers[0]["name"]}) + builder.start("hotend", {"id": hotend_name}) # Compatible is a special case, as it's added as a meta data entry (instead of an instance). - compatible = hotend.getMetaDataEntry("compatible") + compatible = variant_node.metadata.get("compatible") if compatible is not None: builder.start("setting", {"key": "hardware compatible"}) if compatible: @@ -254,7 +270,7 @@ class XmlMaterialProfile(InstanceContainer): builder.data("no") builder.end("setting") - for instance in hotend.findInstances(): + for instance in variant_node.getContainer().findInstances(): if container.getInstance(instance.definition.key) and container.getProperty(instance.definition.key, "value") == instance.value: # If the settings match that of the machine profile, just skip since we inherit the machine profile. continue @@ -590,14 +606,10 @@ class XmlMaterialProfile(InstanceContainer): if buildplate_id is None: continue - variant_containers = ContainerRegistry.getInstance().findInstanceContainersMetadata( - id = buildplate_id) - if not variant_containers: - # It is not really properly defined what "ID" is so also search for variants by name. - variant_containers = ContainerRegistry.getInstance().findInstanceContainersMetadata( - definition = machine_id, name = buildplate_id) - - if not variant_containers: + from cura.Machines.VariantManager import VariantType + variant_manager = CuraApplication.getInstance().getVariantManager() + variant_node = variant_manager.getVariantNode(machine_id, buildplate_id) + if not variant_node: continue buildplate_compatibility = machine_compatibility @@ -618,16 +630,14 @@ class XmlMaterialProfile(InstanceContainer): hotends = machine.iterfind("./um:hotend", self.__namespaces) for hotend in hotends: - hotend_id = hotend.get("id") - if hotend_id is None: + # The "id" field for hotends in material profiles are actually + hotend_name = hotend.get("id") + if hotend_name is None: continue - variant_containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(id = hotend_id) - if not variant_containers: - # It is not really properly defined what "ID" is so also search for variants by name. - variant_containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(definition = machine_id, name = hotend_id) - - if not variant_containers: + variant_manager = CuraApplication.getInstance().getVariantManager() + variant_node = variant_manager.getVariantNode(machine_id, hotend_name) + if not variant_node: continue hotend_compatibility = machine_compatibility @@ -643,20 +653,20 @@ class XmlMaterialProfile(InstanceContainer): else: Logger.log("d", "Unsupported material setting %s", key) - new_hotend_id = self.getId() + "_" + machine_id + "_" + hotend_id.replace(" ", "_") + new_hotend_specific_material_id = self.getId() + "_" + machine_id + "_" + hotend_name.replace(" ", "_") # Same as machine compatibility, keep the derived material containers consistent with the parent material - if ContainerRegistry.getInstance().isLoaded(new_hotend_id): - new_hotend_material = ContainerRegistry.getInstance().findContainers(id = new_hotend_id)[0] + if ContainerRegistry.getInstance().isLoaded(new_hotend_specific_material_id): + new_hotend_material = ContainerRegistry.getInstance().findContainers(id = new_hotend_specific_material_id)[0] is_new_material = False else: - new_hotend_material = XmlMaterialProfile(new_hotend_id) + new_hotend_material = XmlMaterialProfile(new_hotend_specific_material_id) is_new_material = True new_hotend_material.setMetaData(copy.deepcopy(self.getMetaData())) - new_hotend_material.getMetaData()["id"] = new_hotend_id + new_hotend_material.getMetaData()["id"] = new_hotend_specific_material_id new_hotend_material.getMetaData()["name"] = self.getName() - new_hotend_material.getMetaData()["variant"] = variant_containers[0]["id"] + new_hotend_material.getMetaData()["variant_name"] = hotend_name new_hotend_material.setDefinition(machine_id) # Don't use setMetadata, as that overrides it for all materials with same base file new_hotend_material.getMetaData()["compatible"] = hotend_compatibility @@ -833,39 +843,30 @@ class XmlMaterialProfile(InstanceContainer): buildplate_map["buildplate_recommended"][buildplate_id] = buildplate_map["buildplate_recommended"] for hotend in machine.iterfind("./um:hotend", cls.__namespaces): - hotend_id = hotend.get("id") - if hotend_id is None: + hotend_name = hotend.get("id") + if hotend_name is None: continue - variant_containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(id = hotend_id) - if not variant_containers: - # It is not really properly defined what "ID" is so also search for variants by name. - variant_containers = ContainerRegistry.getInstance().findInstanceContainersMetadata(definition = machine_id, name = hotend_id) - hotend_compatibility = machine_compatibility for entry in hotend.iterfind("./um:setting", cls.__namespaces): key = entry.get("key") if key == "hardware compatible": hotend_compatibility = cls._parseCompatibleValue(entry.text) - new_hotend_id = container_id + "_" + machine_id + "_" + hotend_id.replace(" ", "_") + new_hotend_specific_material_id = container_id + "_" + machine_id + "_" + hotend_name.replace(" ", "_") # Same as machine compatibility, keep the derived material containers consistent with the parent material - found_materials = ContainerRegistry.getInstance().findInstanceContainersMetadata(id = new_hotend_id) + found_materials = ContainerRegistry.getInstance().findInstanceContainersMetadata(id = new_hotend_specific_material_id) if found_materials: new_hotend_material_metadata = found_materials[0] else: new_hotend_material_metadata = {} new_hotend_material_metadata.update(base_metadata) - if variant_containers: - new_hotend_material_metadata["variant"] = variant_containers[0]["id"] - else: - new_hotend_material_metadata["variant"] = hotend_id - _with_missing_variants.append(new_hotend_material_metadata) + new_hotend_material_metadata["variant_name"] = hotend_name new_hotend_material_metadata["compatible"] = hotend_compatibility new_hotend_material_metadata["machine_manufacturer"] = machine_manufacturer - new_hotend_material_metadata["id"] = new_hotend_id + new_hotend_material_metadata["id"] = new_hotend_specific_material_id new_hotend_material_metadata["definition"] = machine_id if buildplate_map["buildplate_compatible"]: new_hotend_material_metadata["buildplate_compatible"] = buildplate_map["buildplate_compatible"] @@ -992,21 +993,3 @@ def _indent(elem, level = 0): # before the last } def _tag_without_namespace(element): return element.tag[element.tag.rfind("}") + 1:] - -#While loading XML profiles, some of these profiles don't know what variant -#they belong to. We'd like to search by the machine ID and the variant's -#name, but we don't know the variant's ID. Not all variants have been loaded -#yet so we can't run a filter on the name and machine. The ID is unknown -#so we can't lazily load the variant either. So we have to wait until all -#the rest is loaded properly and then assign the correct variant to the -#material files that were missing it. -_with_missing_variants = [] -def _fillMissingVariants(): - registry = ContainerRegistry.getInstance() - for variant_metadata in _with_missing_variants: - variants = registry.findContainersMetadata(definition = variant_metadata["definition"], name = variant_metadata["variant"]) - if not variants: - Logger.log("w", "Could not find variant for variant-specific material {material_id}.".format(material_id = variant_metadata["id"])) - continue - variant_metadata["variant"] = variants[0]["id"] -ContainerRegistry.allMetadataLoaded.connect(_fillMissingVariants) diff --git a/resources/definitions/anycubic_i3_mega.def.json b/resources/definitions/anycubic_i3_mega.def.json index cba868900c..7106038193 100644 --- a/resources/definitions/anycubic_i3_mega.def.json +++ b/resources/definitions/anycubic_i3_mega.def.json @@ -12,7 +12,7 @@ "platform": "anycubic_i3_mega_platform.stl", "has_materials": false, "has_machine_quality": true, - "preferred_quality": "*normal*" + "preferred_quality_type": "normal" }, "overrides": diff --git a/resources/definitions/builder_premium_large.def.json b/resources/definitions/builder_premium_large.def.json index b496dc524e..deb1539a9a 100644 --- a/resources/definitions/builder_premium_large.def.json +++ b/resources/definitions/builder_premium_large.def.json @@ -12,16 +12,14 @@ "platform": "builder_premium_platform.stl", "platform_offset": [-126, -36, 117], "has_machine_quality": true, - "preferred_quality": "*Normal*", + "preferred_quality_type": "normal", "machine_extruder_trains": { "0": "builder_premium_large_rear", "1": "builder_premium_large_front" } }, - - - + "overrides": { "machine_name": { "default_value": "Builder Premium Large" }, "machine_heated_bed": { "default_value": true }, @@ -36,7 +34,7 @@ "default_material_print_temperature": { "value": "215" }, "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" }, "material_standby_temperature": { "value": "material_print_temperature" }, - + "switch_extruder_retraction_speeds": {"default_value": 15 }, "switch_extruder_retraction_speed": {"default_value": 15 }, "switch_extruder_prime_speed": {"default_value": 15 }, @@ -58,9 +56,9 @@ "prime_tower_wipe_enabled": { "default_value": false }, "prime_tower_min_volume": { "default_value": 50 }, "dual_pre_wipe": { "default_value": false }, - + "prime_blob_enable": { "enabled": true }, - + "acceleration_enabled": { "value": "True" }, "acceleration_layer_0": { "value": "acceleration_topbottom" }, "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, @@ -71,7 +69,7 @@ "acceleration_travel": { "value": "acceleration_print" }, "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 3000)" }, "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" }, - + "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" }, "cool_min_layer_time": { "default_value": 10 }, @@ -84,9 +82,9 @@ "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, - + "wall_thickness": { "value": "1.2" }, - + "retraction_amount": { "default_value": 3 }, "retraction_speed": { "default_value": 15 }, "retraction_retract_speed": { "default_value": 15 }, @@ -113,4 +111,4 @@ }, "machine_extruder_count": { "default_value": 2 } } -} \ No newline at end of file +} diff --git a/resources/definitions/builder_premium_medium.def.json b/resources/definitions/builder_premium_medium.def.json index fe8a039fc4..c28c7c5de6 100644 --- a/resources/definitions/builder_premium_medium.def.json +++ b/resources/definitions/builder_premium_medium.def.json @@ -12,16 +12,14 @@ "platform": "builder_premium_platform.stl", "platform_offset": [-126, -36, 117], "has_machine_quality": true, - "preferred_quality": "*Normal*", + "preferred_quality_type": "normal", "machine_extruder_trains": { "0": "builder_premium_medium_rear", "1": "builder_premium_medium_front" } }, - - - + "overrides": { "machine_name": { "default_value": "Builder Premium Medium" }, "machine_heated_bed": { "default_value": true }, @@ -36,7 +34,7 @@ "default_material_print_temperature": { "value": "215" }, "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" }, "material_standby_temperature": { "value": "material_print_temperature" }, - + "switch_extruder_retraction_speeds": {"default_value": 15 }, "switch_extruder_retraction_speed": {"default_value": 15 }, "switch_extruder_prime_speed": {"default_value": 15 }, @@ -58,9 +56,9 @@ "prime_tower_wipe_enabled": { "default_value": false }, "prime_tower_min_volume": { "default_value": 50 }, "dual_pre_wipe": { "default_value": false }, - + "prime_blob_enable": { "enabled": true }, - + "acceleration_enabled": { "value": "True" }, "acceleration_layer_0": { "value": "acceleration_topbottom" }, "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, @@ -71,7 +69,7 @@ "acceleration_travel": { "value": "acceleration_print" }, "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 3000)" }, "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" }, - + "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" }, "cool_min_layer_time": { "default_value": 10 }, @@ -84,9 +82,9 @@ "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, - + "wall_thickness": { "value": "1.2" }, - + "retraction_amount": { "default_value": 3 }, "retraction_speed": { "default_value": 15 }, "retraction_retract_speed": { "default_value": 15 }, @@ -113,4 +111,4 @@ }, "machine_extruder_count": { "default_value": 2 } } -} \ No newline at end of file +} diff --git a/resources/definitions/builder_premium_small.def.json b/resources/definitions/builder_premium_small.def.json index a1660b63cf..8e2fe44631 100644 --- a/resources/definitions/builder_premium_small.def.json +++ b/resources/definitions/builder_premium_small.def.json @@ -11,16 +11,14 @@ "platform": "builder_premium_platform.stl", "platform_offset": [-126, -36, 117], "has_machine_quality": true, - "preferred_quality": "*Normal*", + "preferred_quality_type": "normal", "machine_extruder_trains": { "0": "builder_premium_small_rear", "1": "builder_premium_small_front" } }, - - - + "overrides": { "machine_name": { "default_value": "Builder Premium Small" }, "machine_heated_bed": { "default_value": true }, @@ -35,7 +33,7 @@ "default_material_print_temperature": { "value": "215" }, "material_print_temperature_layer_0": { "value": "material_print_temperature + 5" }, "material_standby_temperature": { "value": "material_print_temperature" }, - + "switch_extruder_retraction_speeds": {"default_value": 15 }, "switch_extruder_retraction_speed": {"default_value": 15 }, "switch_extruder_prime_speed": {"default_value": 15 }, @@ -57,9 +55,9 @@ "prime_tower_wipe_enabled": { "default_value": false }, "prime_tower_min_volume": { "default_value": 50 }, "dual_pre_wipe": { "default_value": false }, - + "prime_blob_enable": { "enabled": true }, - + "acceleration_enabled": { "value": "True" }, "acceleration_layer_0": { "value": "acceleration_topbottom" }, "acceleration_prime_tower": { "value": "math.ceil(acceleration_print * 2000 / 4000)" }, @@ -70,7 +68,7 @@ "acceleration_travel": { "value": "acceleration_print" }, "acceleration_wall": { "value": "math.ceil(acceleration_print * 1000 / 3000)" }, "acceleration_wall_0": { "value": "math.ceil(acceleration_wall * 1000 / 1000)" }, - + "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" }, "cool_min_layer_time": { "default_value": 10 }, @@ -83,9 +81,9 @@ "jerk_topbottom": { "value": "math.ceil(jerk_print * 5 / 25)" }, "jerk_wall": { "value": "math.ceil(jerk_print * 10 / 25)" }, "jerk_wall_0": { "value": "math.ceil(jerk_wall * 5 / 10)" }, - + "wall_thickness": { "value": "1.2" }, - + "retraction_amount": { "default_value": 3 }, "retraction_speed": { "default_value": 15 }, "retraction_retract_speed": { "default_value": 15 }, @@ -112,4 +110,4 @@ }, "machine_extruder_count": { "default_value": 2 } } -} \ No newline at end of file +} diff --git a/resources/definitions/cartesio.def.json b/resources/definitions/cartesio.def.json index 44f3153015..5ca891d6c5 100644 --- a/resources/definitions/cartesio.def.json +++ b/resources/definitions/cartesio.def.json @@ -5,7 +5,7 @@ "metadata": { "visible": true, "author": "Scheepers", - "manufacturer": "Cartesio bv", + "manufacturer": "MaukCC", "file_formats": "text/x-gcode", "has_machine_quality": true, @@ -14,10 +14,10 @@ "has_variant_materials": true, "has_variants": true, - "variants_name": "Nozzle size", - "preferred_variant": "*0.8*", - "preferred_material": "*pla*", - "preferred_quality": "*normal*", + "variants_name": "Tool", + "preferred_variant_name": "0.8 mm", + "preferred_material": "generic_pla", + "preferred_quality_type": "normal", "machine_extruder_trains": { @@ -44,7 +44,7 @@ "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" }, "material_print_temp_wait": { "default_value": false }, "material_bed_temp_wait": { "default_value": false }, - "prime_tower_enable": { "default_value": true }, + "prime_tower_enable": { "default_value": false }, "prime_tower_wall_thickness": { "resolve": 0.7 }, "prime_tower_size": { "value": 24.0 }, "prime_tower_position_x": { "value": 125 }, @@ -55,15 +55,16 @@ [[215, 135], [-215, 135], [-215, 75], [215, 75]] ]}, "machine_start_gcode": { - "default_value": "\nM92 E159 ;2288 for V5 extruder\n\nM140 S{material_bed_temperature_layer_0}\nM104 S120 T1\nM104 S120 T2\nM104 S120 T3\n\nG21\nG90\nM42 S255 P13 ;chamber lights\nM42 S255 P12 ;fume extraction\nM204 S300 ;default acceleration\nM205 X10 ;default jerk\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature_layer_0}\n\nM117 Heating for 50 sec.\nG4 S20\nM117 Heating for 30 sec.\nG4 S20\nM117 Heating for 10 sec.\nM300 S1200 P1000\nG4 S9\n\nM117 purging nozzle....\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-1 F600\n\nM117 wiping nozzle....\nG1 X1 Y24 F3000\nG1 X70 F9000\nG1 Z10 F900\n\nM104 S21 T1\nM104 S21 T2\nM104 S21 T3\n\nM117 Printing .....\n" + "default_value": "\nM92 E159 ;2288 for V5 extruder\n\nM140 S{material_bed_temperature_layer_0}\nM104 T1 S120\nM104 T2 S120\nM104 T3 S120\n\nG21\nG90\nM42 S255 P13 ;chamber lights\nM42 S255 P12 ;fume extraction\nM204 S300 ;default acceleration\nM205 X10 ;default jerk\n\nM117 Homing Y ......\nG28 Y\nM117 Homing X ......\nG28 X\nM117 Homing Z ......\nG28 Z F100\nG1 Z10 F600\nG1 X70 Y20 F9000;go to wipe point\n\nM190 S{material_bed_temperature_layer_0}\n\nM117 Heating for 50 sec.\nG4 S20\nM117 Heating for 30 sec.\nG4 S20\nM117 Heating for 10 sec.\nM300 S1200 P1000\nG4 S9\n\nM117 purging nozzle....\nT0\nG92 E0;set E\nG1 E10 F100\nG92 E0\nG1 E-1 F600\n\nM117 wiping nozzle....\nG1 X1 Y24 F3000\nG1 X70 F9000\nG1 Z10 F900\n\nM104 T1 S21\nM104 T2 S21\nM104 T3 S21\n\nM117 Printing .....\n" }, "machine_end_gcode": { - "default_value": "; -- END GCODE --\nM117 cooling down....\nM106 S255\nM140 S5\nM104 S5 T0\nM104 S5 T1\nM104 S5 T2\nM104 S5 T3\n\nG91\nG1 Z1 F900\nG90\n\nG1 X20.0 Y260.0 F6000\nG4 S7\nM84\nG4 S90\nM107\nM42 P12 S0\nM42 P13 S0\nM84\nT0\nM117 Finished.\n; -- end of GCODE --" + "default_value": "; -- END GCODE --\nM117 cooling down....\nM106 S255\nM140 S5\nM104 T0 S5\nM104 T1 S5\nM104 T2 S5\nM104 T3 S5\n\nG91\nG1 Z1 F900\nG90\n\nG1 X20.0 Y260.0 F6000\nG4 S7\nM84\nG4 S90\nM107\nM42 P12 S0\nM42 P13 S0\nM84\nT0\nM117 Finished.\n; -- end of GCODE --" }, "layer_height": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" }, "layer_height_0": { "maximum_value": "(0.8 * min(extruderValues('machine_nozzle_size')))" }, "retraction_extra_prime_amount": { "minimum_value_warning": "-2.0" }, "optimize_wall_printing_order": { "default_value": true }, + "material_initial_print_temperature": {"maximum_value_warning": "material_print_temperature + 15" }, "machine_nozzle_heat_up_speed": {"default_value": 20}, "machine_nozzle_cool_down_speed": {"default_value": 20}, "machine_min_cool_heat_time_window": {"default_value": 5} diff --git a/resources/definitions/creality_cr10.def.json b/resources/definitions/creality_cr10.def.json index 7a58adcd4d..eb0b8c7306 100644 --- a/resources/definitions/creality_cr10.def.json +++ b/resources/definitions/creality_cr10.def.json @@ -7,7 +7,7 @@ "author": "Michael Wildermuth", "manufacturer": "Creality3D", "file_formats": "text/x-gcode", - "preferred_quality": "*Draft*" + "preferred_quality_type": "draft" }, "overrides": { "machine_width": { diff --git a/resources/definitions/dagoma_discoeasy200.def.json b/resources/definitions/dagoma_discoeasy200.def.json index 1674801b5e..4f0fddc41d 100644 --- a/resources/definitions/dagoma_discoeasy200.def.json +++ b/resources/definitions/dagoma_discoeasy200.def.json @@ -50,7 +50,7 @@ "default_value": 60 }, "speed_travel": { - "default_value": 100 + "value": "100" }, "retraction_amount": { "default_value": 3.5 diff --git a/resources/definitions/dagoma_neva.def.json b/resources/definitions/dagoma_neva.def.json index 430d2f6ab1..21a557ac22 100644 --- a/resources/definitions/dagoma_neva.def.json +++ b/resources/definitions/dagoma_neva.def.json @@ -42,7 +42,7 @@ "default_value": "elliptic" }, "machine_gcode_flavor": { - "default_value": "RepRap" + "default_value": "RepRap (RepRap)" }, "machine_start_gcode": { "default_value": ";Gcode by Cura\nG90\nG28\nM109 S100\nG29\nM104 S{material_print_temperature_layer_0}\nG0 X0 Y-85\nG0 Z0.26\nM109 S{material_print_temperature_layer_0}\nM82\nG92 E0\nG1 F200 E6\nG92 E0\nG1 F200 E-3.5\nG0 Z0.15\nG0 X10\nG0 Z3\nG1 F6000\n" diff --git a/resources/definitions/fabtotum.def.json b/resources/definitions/fabtotum.def.json index 87ce11a35c..d66de07c4a 100644 --- a/resources/definitions/fabtotum.def.json +++ b/resources/definitions/fabtotum.def.json @@ -13,18 +13,18 @@ "has_machine_quality": true, "has_variants": true, "variants_name": "Head", - "preferred_variant": "*lite04*", - "preferred_material": "*fabtotum_pla*", + "preferred_variant_name": "Lite 0.4 mm", + "preferred_material": "fabtotum_pla", "supports_usb_connection": false }, "overrides": { "machine_name": { "default_value": "FABtotum Personal Fabricator" }, "machine_start_gcode": { - "default_value": ";Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {infill_sparse_density}\n;Top\\Bottom Thickness: {top_bottom_thickness}\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG4 S1 ;1 millisecond pause to buffer the bep bep \nM728 ;FAB bep bep (start the print, go check the oozing and skirt lines adesion) \nG4 S1 ;1 second pause to reach the printer (run fast)\nG92 E0 ;zero the extruded length \nG1 F200 E35 ;slowly extrude 35mm of filament to clean the nozzle and build up extrusion pressure \nG92 E0 ;zero the extruded length again \nG1 F{speed_travel} ;Set travel speed \n;print" + "default_value": ";Layer height: {layer_height}\n;Walls: {wall_thickness}\n;Fill: {infill_sparse_density}\n;Top\\Bottom Thickness: {top_bottom_thickness}\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG4 S1 ;1 millisecond pause to buffer the bep bep \nM300 S2 ;FAB bep bep (start the print, go check the oozing and skirt lines adesion) \nG4 S1 ;1 second pause to reach the printer (run fast)\nG92 E0 ;zero the extruded length \nG1 F200 E35 ;slowly extrude 35mm of filament to clean the nozzle and build up extrusion pressure \nG92 E0 ;zero the extruded length again \n;print" }, "machine_end_gcode": { - "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-3 X+5 Y+5 F5000 ;move Z up a bit and retract filament even more\n;end of the print\nM84 ;steppers off\nG90 ;absolute positioning\nM728 ;FAB bep bep (end print)" + "default_value": "M104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-3 X+5 Y+5 F5000 ;move Z up a bit and retract filament even more\n;end of the print\nM84 ;steppers off\nG90 ;absolute positioning\nM300 S2 ;FAB bep bep (end print)" }, "gantry_height": { "default_value": 55 }, "machine_width": { "default_value": 214 }, diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 4b14500360..8c67462667 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -11,8 +11,8 @@ "file_formats": "text/x-gcode;application/x-stl-ascii;application/x-stl-binary;application/x-wavefront-obj;application/x3g", "visible": false, "has_materials": true, - "preferred_material": "*generic_pla*", - "preferred_quality": "*normal*", + "preferred_material": "generic_pla", + "preferred_quality_type": "normal", "machine_extruder_trains": { "0": "fdmextruder" @@ -2137,6 +2137,7 @@ "default_value": 1.5, "value": "line_width * 2", "minimum_value": "0", + "minimum_value_warning": "line_width * 1.5", "maximum_value_warning": "10", "enabled": "retraction_enable", "settable_per_mesh": false, diff --git a/resources/definitions/gmax15plus.def.json b/resources/definitions/gmax15plus.def.json index d651a86bb3..897d492bb2 100644 --- a/resources/definitions/gmax15plus.def.json +++ b/resources/definitions/gmax15plus.def.json @@ -10,11 +10,10 @@ "category": "Other", "file_formats": "text/x-gcode", "platform": "gmax_1-5_xt-plus_s3d_full model_150707.stl", + "has_machine_quality": true, "has_variants": true, "variants_name": "Hotend", - "preferred_variant": "*0.5mm E3D (Default)*" - - + "preferred_variant_name": "0.5mm E3D (Default)" }, "overrides": { diff --git a/resources/definitions/gmax15plus_dual.def.json b/resources/definitions/gmax15plus_dual.def.json index 4e9a91e88d..8c57c8af63 100644 --- a/resources/definitions/gmax15plus_dual.def.json +++ b/resources/definitions/gmax15plus_dual.def.json @@ -11,12 +11,13 @@ "file_formats": "text/x-gcode", "platform": "gmax_1-5_xt-plus_s3d_full model_150707.stl", "has_variants": true, + "has_machine_quality": true, "variants_name": "Hotend", - "preferred_variant": "*0.5mm E3D (Default)*", + "preferred_variant_name": "0.5mm E3D (Default)", "machine_extruder_trains": { "0": "gmax15plus_dual_extruder_0", "1": "gmax15plus_dual_extruder_1" - } + } }, "overrides": { diff --git a/resources/definitions/imade3d_jellybox.def.json b/resources/definitions/imade3d_jellybox.def.json index 11df730408..b234e4b2cd 100644 --- a/resources/definitions/imade3d_jellybox.def.json +++ b/resources/definitions/imade3d_jellybox.def.json @@ -9,9 +9,8 @@ "platform": "imade3d_jellybox_platform.stl", "platform_offset": [ 0, -0.3, 0], "file_formats": "text/x-gcode", - "preferred_variant": "*0.4*", - "preferred_material": "*generic_pla*", - "preferred_quality": "*fast*", + "preferred_variant_name": "0.4 mm", + "preferred_quality_type": "fast", "has_materials": true, "has_variants": true, "has_machine_materials": true, diff --git a/resources/definitions/malyan_m200.def.json b/resources/definitions/malyan_m200.def.json index 365b031c43..a3f4f81ecf 100644 --- a/resources/definitions/malyan_m200.def.json +++ b/resources/definitions/malyan_m200.def.json @@ -11,7 +11,7 @@ "platform": "malyan_m200_platform.stl", "has_machine_quality": true, "has_materials": true, - "preferred_quality": "*normal*", + "preferred_quality_type": "normal", "supports_usb_connection": true, "visible": true, "first_start_actions": ["MachineSettingsAction"], diff --git a/resources/definitions/monoprice_select_mini_v2.def.json b/resources/definitions/monoprice_select_mini_v2.def.json index 87014c136b..99bb7ef50a 100644 --- a/resources/definitions/monoprice_select_mini_v2.def.json +++ b/resources/definitions/monoprice_select_mini_v2.def.json @@ -10,7 +10,7 @@ "file_formats": "text/x-gcode", "has_machine_quality": true, "has_materials": true, - "preferred_quality": "*normal*", + "preferred_quality_type": "normal", "visible": true }, diff --git a/resources/definitions/tevo_blackwidow.def.json b/resources/definitions/tevo_blackwidow.def.json index 04cadfb160..22f7095e17 100644 --- a/resources/definitions/tevo_blackwidow.def.json +++ b/resources/definitions/tevo_blackwidow.def.json @@ -11,7 +11,7 @@ "has_materials": false, "has_machine_quality": true, "platform": "tevo_blackwidow.stl", - "preferred_quality": "*normal*" + "preferred_quality_type": "normal" }, "overrides": { diff --git a/resources/definitions/ultimaker2.def.json b/resources/definitions/ultimaker2.def.json index 038071574f..33b48116be 100644 --- a/resources/definitions/ultimaker2.def.json +++ b/resources/definitions/ultimaker2.def.json @@ -20,12 +20,10 @@ "overrides": { "machine_name": { "default_value": "Ultimaker 2" }, "machine_start_gcode" : { - "default_value": "", "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"G21 ;metric values\\nG90 ;absolute positioning\\nM82 ;set extruder to absolute mode\\nM107 ;start with the fan off\\nG28 Z0 ;move Z to bottom endstops\\nG28 X0 Y0 ;move X/Y to endstops\\nG1 X15 Y0 F4000 ;move X/Y to front of printer\\nG1 Z15.0 F9000 ;move the platform to 15mm\\nG92 E0 ;zero the extruded length\\nG1 F200 E10 ;extrude 10 mm of feed stock\\nG92 E0 ;zero the extruded length again\\nG1 F9000\\n;Put printing message on LCD screen\\nM117 Printing...\"" }, "machine_end_gcode" : { - "default_value": "", - "value": "\"\" if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\"" + "value": "\";Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\" if machine_gcode_flavor == \"UltiGCode\" else \"M104 S0 ;extruder heater off\\nM140 S0 ;heated bed heater off (if you have it)\\nG91 ;relative positioning\\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\\nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more\\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\\nM84 ;steppers off\\nG90 ;absolute positioning\\n;Version _2.6 of the firmware can abort the print too early if the file ends\\n;too soon. However if the file hasn't ended yet because there are comments at\\n;the end of the file, it won't abort yet. Therefore we have to put at least 512\\n;bytes at the end of the g-code so that the file is not yet finished by the\\n;time that the motion planner gets flushed. With firmware version _3.3 this\\n;should be fixed, so this comment wouldn't be necessary any more. Now we have\\n;to pad this text to make precisely 512 bytes.\"" }, "machine_width": { "default_value": 223 diff --git a/resources/definitions/ultimaker2_plus.def.json b/resources/definitions/ultimaker2_plus.def.json index 58833904d2..935bf5b6c0 100644 --- a/resources/definitions/ultimaker2_plus.def.json +++ b/resources/definitions/ultimaker2_plus.def.json @@ -9,7 +9,7 @@ "file_formats": "text/x-gcode", "platform": "ultimaker2_platform.obj", "platform_texture": "Ultimaker2Plusbackplate.png", - "preferred_variant": "*0.4*", + "preferred_variant_name": "0.4 mm", "has_variants": true, "has_materials": true, "has_machine_materials": true, diff --git a/resources/definitions/ultimaker3.def.json b/resources/definitions/ultimaker3.def.json index 826960a621..dcf6b167c0 100644 --- a/resources/definitions/ultimaker3.def.json +++ b/resources/definitions/ultimaker3.def.json @@ -15,8 +15,8 @@ "has_machine_materials": true, "has_variant_materials": true, "has_variants": true, - "preferred_variant": "*aa04*", - "preferred_quality": "*Normal*", + "preferred_variant_name": "AA 0.4", + "preferred_quality_type": "normal", "variants_name": "Print core", "machine_extruder_trains": { @@ -123,7 +123,6 @@ "raft_margin": { "value": "10" }, "raft_surface_layers": { "value": "1" }, "retraction_amount": { "value": "2" }, - "retraction_combing": { "default_value": "noskin" }, "retraction_count_max": { "value": "10" }, "retraction_extrusion_window": { "value": "1" }, "retraction_hop": { "value": "2" }, @@ -154,6 +153,7 @@ "travel_avoid_distance": { "value": "3" }, "wall_0_inset": { "value": "0" }, "wall_line_width_x": { "value": "round(wall_line_width * 0.3 / 0.35, 2)" }, - "wall_thickness": { "value": "1" } + "wall_thickness": { "value": "1" }, + "zig_zaggify_infill": { "value": "True" } } } diff --git a/resources/definitions/ultimaker3_extended.def.json b/resources/definitions/ultimaker3_extended.def.json index 385199f4f1..3a1be3a303 100644 --- a/resources/definitions/ultimaker3_extended.def.json +++ b/resources/definitions/ultimaker3_extended.def.json @@ -16,7 +16,7 @@ "has_variant_materials": true, "has_materials": true, "has_variants": true, - "preferred_variant": "*aa04*", + "preferred_variant_name": "AA 0.4", "variants_name": "Print core", "machine_extruder_trains": { diff --git a/resources/extruders/cartesio_extruder_0.def.json b/resources/extruders/cartesio_extruder_0.def.json index 5558d9325e..47b5b5abf5 100644 --- a/resources/extruders/cartesio_extruder_0.def.json +++ b/resources/extruders/cartesio_extruder_0.def.json @@ -16,17 +16,10 @@ "machine_nozzle_offset_x": { "default_value": 0.0 }, "machine_nozzle_offset_y": { "default_value": 0.0 }, "machine_extruder_start_code": { - "default_value": "\n;start extruder_0\n\nM117 printing...\n" + "default_value": "\n;start T0\n\nM104 T0 S{material_print_temperature_layer_0}\nG1 X65 Y35 F9000 ; go to wipe position\nM109 T0 S{material_print_temperature_layer_0}; wait for temp\nG1 E10 F300; prime\nG92 E0\nG1 X45 Y15 F3000; wipe\nG1 X55 F9000\nG1 Y35 F6000; wipe again\n\nM117 printing...\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T0 S120\n;end extruder_0\nM117 temp is {material_print_temp}\n" - }, - - "machine_extruder_start_pos_abs": { "default_value": true }, - "machine_extruder_start_pos_x": { "default_value": 24 }, - "machine_extruder_start_pos_y": { "default_value": 16 }, - "machine_extruder_end_pos_abs": { "default_value": true }, - "machine_extruder_end_pos_x": { "default_value": 48 }, - "machine_extruder_end_pos_y": { "default_value": 16 } + "default_value": "\nM104 T0 S{material_standby_temperature}\nG1 X65 Y35 F9000 ; go to wipe position\nM109 T0 R{material_standby_temperature}; wait for temp\nG1 X45 Y15 F3000; wipe\nG1 X55 F9000\nG1 Y35 F6000; wipe again\n\n;end T0\n\n" + } } } diff --git a/resources/extruders/cartesio_extruder_1.def.json b/resources/extruders/cartesio_extruder_1.def.json index f8350f8091..78bcccd12a 100644 --- a/resources/extruders/cartesio_extruder_1.def.json +++ b/resources/extruders/cartesio_extruder_1.def.json @@ -16,17 +16,10 @@ "machine_nozzle_offset_x": { "default_value": 24.0 }, "machine_nozzle_offset_y": { "default_value": 0.0 }, "machine_extruder_start_code": { - "default_value": "\n;start extruder_1\n\nM117 printing...\n" + "default_value": "\n;start T1\n\nM104 T1 S{material_print_temperature_layer_0}\nG1 X41 Y35 F9000 ; go to wipe position\nM109 T1 S{material_print_temperature_layer_0}; wait for temp\nG1 E10 F300; prime\nG92 E0\nG1 X21 Y15 F3000; wipe\nG1 X34 F9000\nG1 Y35 F6000; wipe again\n\nM117 printing...\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T1 S120\n;end extruder_1\n" - }, - - "machine_extruder_start_pos_abs": { "default_value": true }, - "machine_extruder_start_pos_x": { "default_value": 48 }, - "machine_extruder_start_pos_y": { "default_value": 16 }, - "machine_extruder_end_pos_abs": { "default_value": true }, - "machine_extruder_end_pos_x": { "default_value": 24 }, - "machine_extruder_end_pos_y": { "default_value": 16 } + "default_value": "\nM104 T1 S{material_standby_temperature}\nG1 X41 Y35 F9000 ; go to wipe position\nM109 T1 R{material_standby_temperature}; wait for temp\nG1 X21 Y15 F3000; wipe\nG1 X31 F9000\nG1 Y35 F6000; wipe again\n\n;end T1\n\n" + } } } diff --git a/resources/extruders/cartesio_extruder_2.def.json b/resources/extruders/cartesio_extruder_2.def.json index bfc10e75c3..dbd6643bfe 100644 --- a/resources/extruders/cartesio_extruder_2.def.json +++ b/resources/extruders/cartesio_extruder_2.def.json @@ -13,20 +13,13 @@ "default_value": 2, "maximum_value": "3" }, - "machine_nozzle_offset_x": { "default_value": 0.0 }, - "machine_nozzle_offset_y": { "default_value": 0.0 }, + "machine_nozzle_offset_x": { "default_value": 24.0 }, + "machine_nozzle_offset_y": { "default_value": -100.0 }, "machine_extruder_start_code": { - "default_value": "\n;start extruder_2\n\nM117 printing...\n" + "default_value": "\n;start T2\n\nM104 T2 S{material_print_temperature_layer_0}\nG1 X41 Y215 F9000 ; go to wipe position\nM109 T2 S{material_print_temperature_layer_0}; wait for temp\nG1 E10 F300; prime\nG92 E0\nG1 X21 Y235 F3000; wipe\nG1 X31 F9000\nG1 Y215 F6000; wipe again\n\nM117 printing...\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T2 S120\n;end extruder_2\n" - }, - - "machine_extruder_start_pos_abs": { "default_value": true }, - "machine_extruder_start_pos_x": { "default_value": 24 }, - "machine_extruder_start_pos_y": { "default_value": 309 }, - "machine_extruder_end_pos_abs": { "default_value": true }, - "machine_extruder_end_pos_x": { "default_value": 48 }, - "machine_extruder_end_pos_y": { "default_value": 309 } + "default_value": "\nM104 T2 S{material_standby_temperature}\nG1 X41 Y215 F9000 ; go to wipe position\nM109 T2 R{material_standby_temperature}; wait for temp\nG1 X21 Y235 F3000; wipe\nG1 X31 F9000\nG1 Y215 F6000; wipe again\n\n;end T2\n\n" + } } } diff --git a/resources/extruders/cartesio_extruder_3.def.json b/resources/extruders/cartesio_extruder_3.def.json index f0be53e564..beed117abe 100644 --- a/resources/extruders/cartesio_extruder_3.def.json +++ b/resources/extruders/cartesio_extruder_3.def.json @@ -14,19 +14,12 @@ "maximum_value": "3" }, "machine_nozzle_offset_x": { "default_value": 0.0 }, - "machine_nozzle_offset_y": { "default_value": 0.0 }, + "machine_nozzle_offset_y": { "default_value": -100.0 }, "machine_extruder_start_code": { - "default_value": "\n;start extruder_3\n\nM117 printing...\n" + "default_value": "\n;start T3\n\nM104 T3 S{material_print_temperature_layer_0}\nG1 X65 Y215 F9000 ; go to wipe position\nM109 T3 S{material_print_temperature_layer_0}; wait for temp\nG1 E10 F300; prime\nG92 E0\nG1 X45 Y235 F3000; wipe\nG1 X55 F9000\nG1 Y215 F6000; wipe again\n\nM117 printing...\n" }, "machine_extruder_end_code": { - "default_value": "\nM104 T3 S120\n;end extruder_3\n" - }, - - "machine_extruder_start_pos_abs": { "default_value": true }, - "machine_extruder_start_pos_x": { "default_value": 48 }, - "machine_extruder_start_pos_y": { "default_value": 309 }, - "machine_extruder_end_pos_abs": { "default_value": true }, - "machine_extruder_end_pos_x": { "default_value": 24 }, - "machine_extruder_end_pos_y": { "default_value": 309} + "default_value": "\nM104 T3 S{material_standby_temperature}\nG1 X65 Y215 F9000 ; go to wipe position\nM109 T3 R{material_standby_temperature}; wait for temp\nG1 X45 Y235 F3000; wipe\nG1 X55 F9000\nG1 Y215 F6000; wipe again\n\n;end T3\n\n" + } } } diff --git a/resources/i18n/zh_TW/cura.po b/resources/i18n/zh_TW/cura.po index b884b13a19..0a1c5e9294 100644 --- a/resources/i18n/zh_TW/cura.po +++ b/resources/i18n/zh_TW/cura.po @@ -1,22 +1,22 @@ # Cura -# Copyright (C) 2017 Ultimaker +# Copyright (C) 2018 Ultimaker # This file is distributed under the same license as the Cura package. -# Ruben Dulek , 2017. +# Ruben Dulek , 2018. # msgid "" msgstr "" -"Project-Id-Version: Cura 3.1\n" +"Project-Id-Version: Cura 3.2\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" -"POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-11-28 23:48+0800\n" +"POT-Creation-Date: 2018-01-29 16:53+0000\n" +"PO-Revision-Date: 2018-02-04 11:18+0800\n" "Last-Translator: Zhang Heh Ji \n" -"Language-Team: TEAM\n" +"Language-Team: Zhang Heh Ji \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" -"X-Generator: Poedit 2.0.4\n" +"X-Generator: Poedit 2.0.6\n" #: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:26 msgctxt "@action" @@ -189,7 +189,7 @@ msgstr "印表機韌體" #: /home/ruben/Projects/Cura/plugins/PrepareStage/__init__.py:12 msgctxt "@item:inmenu" msgid "Prepare" -msgstr "" +msgstr "準備" #: /home/ruben/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23 msgctxt "@action:button Preceded by 'Ready to'." @@ -562,7 +562,7 @@ msgstr "使用瀏覽器開啟列印作業介面。" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:239 msgctxt "@label Printer name" msgid "Unknown" -msgstr "" +msgstr "未知" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/NetworkClusterPrinterOutputDevice.py:505 #, python-brace-format @@ -597,7 +597,7 @@ msgstr "透過網路連接" #: /home/ruben/Projects/Cura/plugins/MonitorStage/__init__.py:12 msgctxt "@item:inmenu" msgid "Monitor" -msgstr "" +msgstr "監控" #: /home/ruben/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:66 #, python-brace-format @@ -624,7 +624,7 @@ msgstr "無法存取更新資訊。" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:579 msgctxt "@info:status" msgid "SolidWorks reported errors, while opening your file. We recommend to solve these issues inside SolidWorks itself." -msgstr "" +msgstr "SolidWorks 在開啟檔案時回報了錯誤。建議在 SolidWorks 內部解決這些問題。" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:591 msgctxt "@info:status" @@ -633,6 +633,9 @@ msgid "" "\n" " Thanks!." msgstr "" +"在你的繪圖找不到模型。請你再次檢查它的內容並確認裡面有一個零件或組件。\n" +"\n" +"謝謝。" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksReader.py:595 msgctxt "@info:status" @@ -641,6 +644,9 @@ msgid "" "\n" "Sorry!" msgstr "" +"在你的繪圖找到了超過一個的零件或組件。我們目前只支援一個零件或組件的繪圖。\n" +"\n" +"抱歉！" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/__init__.py:25 msgctxt "@item:inlistbox" @@ -655,7 +661,7 @@ msgstr "SolidWorks 組件檔案" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/__init__.py:33 msgctxt "@item:inlistbox" msgid "SolidWorks drawing file" -msgstr "" +msgstr "SolidWorks 繪圖檔案" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/__init__.py:48 msgctxt "@info:status" @@ -666,6 +672,11 @@ msgid "" "With kind regards\n" " - Thomas Karl Pietrowski" msgstr "" +"親愛的客戶，\n" +"我們無法在您的系統上找到有效安裝的 SolidWorks。這表示未安裝 SolidWorks，或者您沒有擁有有效的授權。請確認 SolidWorks 本身是可以正常執行的，或是聯絡您的技術部門處理。\n" +"\n" +"順頌　時祺\n" +" - Thomas Karl Pietrowski" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/__init__.py:57 msgctxt "@info:status" @@ -676,6 +687,11 @@ msgid "" "With kind regards\n" " - Thomas Karl Pietrowski" msgstr "" +"親愛的客戶，\n" +"您目前正在 Windows 以外的作業系統上執行此外掛。此外掛只能在有安裝有效授權 SolidWorks 的 Windows 上執行。請在有安裝 SolidWorks 的 windows 電腦上安裝此外掛。\n" +"\n" +"順頌　時祺\n" +" - Thomas Karl Pietrowski" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksDialogHandler.py:70 msgid "Configure" @@ -683,7 +699,7 @@ msgstr "設定" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksDialogHandler.py:71 msgid "Installation guide for SolidWorks macro" -msgstr "" +msgstr "SolidWorks 巨集的安裝指南" # Added manually to fix a string that was changed after string freeze. #: /home/ruben/Projects/Cura/plugins/SimulationView/__init__.py:14 @@ -708,7 +724,7 @@ msgstr "修改 G-Code 檔案" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:43 msgctxt "@info" msgid "Cura collects anonymized usage statistics." -msgstr "" +msgstr "Cura 以匿名方式蒐集使用狀況統計資料。" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:46 msgctxt "@info:title" @@ -718,22 +734,22 @@ msgstr "收集資料中" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:48 msgctxt "@action:button" msgid "Allow" -msgstr "" +msgstr "允許" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:49 msgctxt "@action:tooltip" msgid "Allow Cura to send anonymized usage statistics to help prioritize future improvements to Cura. Some of your preferences and settings are sent, the Cura version and a hash of the models you're slicing." -msgstr "" +msgstr "允許 Cura 以匿名方式傳送使用狀況統計資料，用來協助 Cura 的未來改善工作。你的部份偏好設定和參數，Cura 的版本及你切片模型的雜湊值會被傳送。" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:50 msgctxt "@action:button" msgid "Disable" -msgstr "" +msgstr "關閉" #: /home/ruben/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:51 msgctxt "@action:tooltip" msgid "Don't allow Cura to send anonymized usage statistics. You can enable it again in the preferences." -msgstr "" +msgstr "不允許 Cura 傳送匿名的使用狀況統計資料。你可以在偏好設定中再次啟用此功能。" #: /home/ruben/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14 msgctxt "@item:inlistbox" @@ -743,7 +759,7 @@ msgstr "Cura 15.04 列印參數" #: /home/ruben/Projects/Cura/plugins/CuraBlenderPlugin/__init__.py:15 msgctxt "@item:inlistbox" msgid "Blender file" -msgstr "" +msgstr "Blender 檔案" #: /home/ruben/Projects/Cura/plugins/CuraBlenderPlugin/CadIntegrationUtils/CommonReader.py:199 msgctxt "@info:status" @@ -751,6 +767,8 @@ msgid "" "Could not export using \"{}\" quality!\n" "Felt back to \"{}\"." msgstr "" +"無法使用 \"{}\" 品質導出！\n" +"覆蓋回 \"{}\"。" #: /home/ruben/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 #: /home/ruben/Projects/Cura/plugins/GCodeReader/__init__.py:14 @@ -937,12 +955,12 @@ msgstr "Cura 列印參數" #: /home/ruben/Projects/Cura/plugins/CuraPrintProfileCreator/__init__.py:12 msgctxt "@item:inmenu" msgid "Profile Assistant" -msgstr "" +msgstr "參數助手" #: /home/ruben/Projects/Cura/plugins/CuraPrintProfileCreator/__init__.py:17 msgctxt "@item:inlistbox" msgid "Profile Assistant" -msgstr "" +msgstr "參數助手" #: /home/ruben/Projects/Cura/plugins/3MFWriter/__init__.py:30 msgctxt "@item:inlistbox" @@ -1140,13 +1158,13 @@ msgstr "無法從 {0} 匯入列印參數：{1} or !" msgid "This profile {0} contains incorrect data, could not import it." -msgstr "" +msgstr "此列印參數 {0} 含有錯誤的資料，無法導入。" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:240 #, python-brace-format msgctxt "@info:status Don't translate the XML tags or !" msgid "The machine defined in profile {0} doesn't match with your current machine, could not import it." -msgstr "" +msgstr "列印參數 {0} 中的機器設定與你目前的機器不相符，無法導入。" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:274 #, python-brace-format @@ -1158,7 +1176,7 @@ msgstr "已成功匯入列印參數 {0}" #, python-brace-format msgctxt "@info:status" msgid "File {0} does not contain any valid profile." -msgstr "" +msgstr "檔案 {0} 內未含有效的列印參數。" #: /home/ruben/Projects/Cura/cura/Settings/CuraContainerRegistry.py:280 #, python-brace-format @@ -1186,7 +1204,7 @@ msgstr "無法為目前設定找到品質類型 {0}。" #, python-brace-format msgctxt "@label" msgid "Group #{group_nr}" -msgstr "" +msgstr "群組 #{group_nr}" #: /home/ruben/Projects/Cura/cura/BuildVolume.py:100 msgctxt "@info:status" @@ -1246,6 +1264,9 @@ msgid "" "

Please use the \"Send report\" button to post a bug report automatically to our servers

\n" " " msgstr "" +"

發生致命錯誤。請將錯誤報告傳送給我們以便修正此問題。

\n" +"

請使用\"送出報告\"按鈕自動發送一份問題報告給我們的伺服器

\n" +" " #: /home/ruben/Projects/Cura/cura/CrashHandler.py:102 msgctxt "@title:groupbox" @@ -1260,32 +1281,32 @@ msgstr "未知" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:112 msgctxt "@label Cura version number" msgid "Cura version" -msgstr "" +msgstr "Cura 版本" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:113 msgctxt "@label Type of platform" msgid "Platform" -msgstr "" +msgstr "平台" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:114 msgctxt "@label" msgid "Qt version" -msgstr "" +msgstr "Qt 版本" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:115 msgctxt "@label" msgid "PyQt version" -msgstr "" +msgstr "PyQt 版本" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:116 msgctxt "@label OpenGL version" msgid "OpenGL" -msgstr "" +msgstr "OpenGL" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:133 msgctxt "@label" msgid "not yet initialised
" -msgstr "" +msgstr "尚未初始化
" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:136 #, python-brace-format @@ -1308,7 +1329,7 @@ msgstr "
  • OpenGL 渲染器：{renderer}
    • " #: /home/ruben/Projects/Cura/cura/CrashHandler.py:147 msgctxt "@title:groupbox" msgid "Error traceback" -msgstr "" +msgstr "錯誤追溯" #: /home/ruben/Projects/Cura/cura/CrashHandler.py:214 msgctxt "@title:groupbox" @@ -1519,7 +1540,7 @@ msgstr "噴頭孔徑" #: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:393 msgctxt "@label" msgid "Compatible material diameter" -msgstr "" +msgstr "相容的耗材直徑" #: /home/ruben/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:395 msgctxt "@tooltip" @@ -1664,12 +1685,12 @@ msgstr "類型" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:233 msgctxt "@label Printer name" msgid "Ultimaker 3" -msgstr "" +msgstr "Ultimaker 3" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:236 msgctxt "@label Printer name" msgid "Ultimaker 3 Extended" -msgstr "" +msgstr "Ultimaker 3 Extended" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.qml:252 msgctxt "@label" @@ -1736,7 +1757,7 @@ msgstr "%1 未設定成管理一組連線的 Ultimaker 3 印表機的主機" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/ClusterMonitorItem.qml:55 msgctxt "@label link to connect manager" msgid "Add/Remove printers" -msgstr "" +msgstr "新增/移除印表機" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/OpenPanelButton.qml:14 msgctxt "@info:tooltip" @@ -1776,7 +1797,7 @@ msgstr "與印表機的連接中斷" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml:47 msgctxt "@label Printer status" msgid "Unknown" -msgstr "" +msgstr "未知" #: /home/ruben/Projects/Cura/plugins/UM3NetworkPrinting/PrinterInfoBlock.qml:257 msgctxt "@label:status" @@ -1872,62 +1893,62 @@ msgstr "啟用設定" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksWizard.qml:21 msgctxt "@title:window" msgid "SolidWorks: Export wizard" -msgstr "" +msgstr "SolidWorks: 導出精靈" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksWizard.qml:45 #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:140 msgctxt "@action:label" msgid "Quality:" -msgstr "" +msgstr "品質：" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksWizard.qml:78 #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:179 msgctxt "@option:curaSolidworksStlQuality" msgid "Fine (3D-printing)" -msgstr "" +msgstr "精細 (3D-printing)" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksWizard.qml:79 #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:180 msgctxt "@option:curaSolidworksStlQuality" msgid "Coarse (3D-printing)" -msgstr "" +msgstr "粗糙 (3D-printing)" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksWizard.qml:80 #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:181 msgctxt "@option:curaSolidworksStlQuality" msgid "Fine (SolidWorks)" -msgstr "" +msgstr "精細 (SolidWorks)" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksWizard.qml:81 #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:182 msgctxt "@option:curaSolidworksStlQuality" msgid "Coarse (SolidWorks)" -msgstr "" +msgstr "粗糙 (SolidWorks)" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksWizard.qml:94 msgctxt "@text:window" msgid "Show this dialog again" -msgstr "" +msgstr "再次顯示這個對話框" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksWizard.qml:104 msgctxt "@action:button" msgid "Continue" -msgstr "" +msgstr "繼續" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksWizard.qml:116 msgctxt "@action:button" msgid "Abort" -msgstr "" +msgstr "取消" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksMacroTutorial.qml:21 msgctxt "@title:window" msgid "How to install Cura SolidWorks macro" -msgstr "" +msgstr "如何安裝 Cura SolidWorks 巨集" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksMacroTutorial.qml:62 msgctxt "@description:label" msgid "Steps:" -msgstr "" +msgstr "步驟：" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksMacroTutorial.qml:140 msgctxt "@action:button" @@ -1935,101 +1956,103 @@ msgid "" "Open the directory\n" "with macro and icon" msgstr "" +"使用巨集和圖示\n" +"開啟目錄" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksMacroTutorial.qml:160 msgctxt "@description:label" msgid "Instructions:" -msgstr "" +msgstr "操作說明：" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksMacroTutorial.qml:202 msgctxt "@action:playpause" msgid "Play" -msgstr "" +msgstr "播放" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksMacroTutorial.qml:206 msgctxt "@action:playpause" msgid "Pause" -msgstr "" +msgstr "暫停" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksMacroTutorial.qml:268 msgctxt "@action:button" msgid "Previous Step" -msgstr "" +msgstr "前一步" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksMacroTutorial.qml:283 msgctxt "@action:button" msgid "Done" -msgstr "" +msgstr "完成" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksMacroTutorial.qml:287 msgctxt "@action:button" msgid "Next Step" -msgstr "" +msgstr "下一步" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:21 msgctxt "@title:window" msgid "SolidWorks plugin: Configuration" -msgstr "" +msgstr "SolidWorks 外掛：設定" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:39 msgctxt "@title:tab" msgid "Conversion settings" -msgstr "" +msgstr "轉換設定" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:66 msgctxt "@label" msgid "First choice:" -msgstr "" +msgstr "第一選擇：" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:86 msgctxt "@text:menu" msgid "Latest installed version (Recommended)" -msgstr "" +msgstr "最新安裝的版本（建議）" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:95 msgctxt "@text:menu" msgid "Default version" -msgstr "" +msgstr "預設的版本" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:193 msgctxt "@label" msgid "Show wizard before opening SolidWorks files" -msgstr "" +msgstr "開啟 SolidWorks 檔案時顯示精靈" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:203 msgctxt "@label" msgid "Automatically rotate opened file into normed orientation" -msgstr "" +msgstr "自動將開啟的檔案旋轉到正常方向" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:210 msgctxt "@title:tab" msgid "Installation(s)" -msgstr "" +msgstr "安裝" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:284 msgctxt "@label" msgid "COM service found" -msgstr "" +msgstr "找到 COM 服務" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:295 msgctxt "@label" msgid "Executable found" -msgstr "" +msgstr "找到可執行檔案" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:306 msgctxt "@label" msgid "COM starting" -msgstr "" +msgstr "COM 啟動中" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:317 msgctxt "@label" msgid "Revision number" -msgstr "" +msgstr "版本號碼" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:328 msgctxt "@label" msgid "Functions available" -msgstr "" +msgstr "可用功能" #: /home/ruben/Projects/Cura/plugins/CuraSolidWorksPlugin/SolidWorksConfiguration.qml:341 #: /home/ruben/Projects/Cura/resources/qml/WorkspaceSummaryDialog.qml:264 @@ -2215,32 +2238,32 @@ msgstr "平滑" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:38 msgctxt "@label" msgid "Mesh Type" -msgstr "" +msgstr "網格類型" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:69 msgctxt "@label" msgid "Normal model" -msgstr "" +msgstr "普通模型" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:76 msgctxt "@label" msgid "Print as support" -msgstr "" +msgstr "做為支撐" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:84 msgctxt "@label" msgid "Don't support overlap with other models" -msgstr "" +msgstr "不支援與其他模型重疊" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:92 msgctxt "@label" msgid "Modify settings for overlap with other models" -msgstr "" +msgstr "修改其他模型的重疊設定" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:100 msgctxt "@label" msgid "Modify settings for infill of other models" -msgstr "" +msgstr "修改其他模型的填充設定" #: /home/ruben/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:333 msgctxt "@action:button" @@ -2742,7 +2765,7 @@ msgstr "保留" #: /home/ruben/Projects/Cura/resources/qml/DiscardOrKeepProfileChangesDialog.qml:222 msgctxt "@action:button" msgid "Create New Profile" -msgstr "創建新的列印參數" +msgstr "建立新的列印參數" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialView.qml:44 msgctxt "@title" @@ -3098,27 +3121,27 @@ msgstr "（匿名）發送列印資訊" #: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:674 msgctxt "@label" msgid "Experimental" -msgstr "" +msgstr "實驗功能" #: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:680 msgctxt "@info:tooltip" msgid "Use multi build plate functionality" -msgstr "" +msgstr "使用多列印平台功能" #: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:685 msgctxt "@option:check" msgid "Use multi build plate functionality (restart required)" -msgstr "" +msgstr "使用多列印平台功能（需重啟軟體）" #: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:694 msgctxt "@info:tooltip" msgid "Should newly loaded models be arranged on the build plate? Used in conjunction with multi build plate (EXPERIMENTAL)" -msgstr "" +msgstr "新載入的模型要擺放在列印平台上嗎？必需與多列印平台功能一起使用（實驗功能）" #: /home/ruben/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:699 msgctxt "@option:check" msgid "Do not arrange objects on load" -msgstr "" +msgstr "載入時不要擺放物件" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:15 #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:514 @@ -3189,7 +3212,7 @@ msgstr "自訂列印參數" #: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:64 msgctxt "@label" msgid "Create" -msgstr "創建" +msgstr "建立" #: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:80 msgctxt "@label" @@ -3246,7 +3269,7 @@ msgstr "重命名列印參數" #: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:271 msgctxt "@title:window" msgid "Create Profile" -msgstr "創建列印參數" +msgstr "建立列印參數" #: /home/ruben/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:285 msgctxt "@title:window" @@ -3287,7 +3310,7 @@ msgstr "印表機：%1" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:150 msgctxt "@action:button" msgid "Create" -msgstr "創建" +msgstr "建立" #: /home/ruben/Projects/Cura/resources/qml/Preferences/MaterialsPage.qml:160 msgctxt "@action:button" @@ -3531,7 +3554,7 @@ msgstr "影響因素" #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:156 msgctxt "@label" msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders." -msgstr "" +msgstr "這個設定是所有擠出機共用的。修改它會同時更動到所有擠出機的值。" #: /home/ruben/Projects/Cura/resources/qml/Settings/SettingItem.qml:159 msgctxt "@label" @@ -3582,7 +3605,7 @@ msgstr "00 小時 00 分" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:359 msgctxt "@tooltip" msgid "Time specification" -msgstr "" +msgstr "時間規格" #: /home/ruben/Projects/Cura/resources/qml/Sidebar.qml:441 msgctxt "@label" @@ -3639,12 +3662,12 @@ msgstr "檢視(&V)" #: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:37 msgctxt "@action:inmenu menubar:view" msgid "&Camera position" -msgstr "" +msgstr "視角位置(&C)" #: /home/ruben/Projects/Cura/resources/qml/Menus/ViewMenu.qml:52 msgctxt "@action:inmenu menubar:view" msgid "&Build plate" -msgstr "" +msgstr "列印平台(&B)" #: /home/ruben/Projects/Cura/resources/qml/Menus/NozzleMenu.qml:40 msgctxt "@title:menuitem %1 is the nozzle currently loaded in the printer" @@ -3812,27 +3835,27 @@ msgstr "退出(&Q)" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:114 msgctxt "@action:inmenu menubar:view" msgid "&3D View" -msgstr "" +msgstr "立體圖(&3)" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:121 msgctxt "@action:inmenu menubar:view" msgid "&Front View" -msgstr "" +msgstr "前視圖(&F)" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:128 msgctxt "@action:inmenu menubar:view" msgid "&Top View" -msgstr "" +msgstr "上視圖(&T)" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:135 msgctxt "@action:inmenu menubar:view" msgid "&Left Side View" -msgstr "" +msgstr "左視圖(&L)" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:142 msgctxt "@action:inmenu menubar:view" msgid "&Right Side View" -msgstr "" +msgstr "右視圖(&R)" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:149 msgctxt "@action:inmenu" @@ -3867,7 +3890,7 @@ msgstr "捨棄目前更改（&D）" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:197 msgctxt "@action:inmenu menubar:profile" msgid "&Create profile from current settings/overrides..." -msgstr "從目前設定 / 覆寫值創建列印參數（&C）…" +msgstr "從目前設定 / 覆寫值建立列印參數（&C）…" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:203 msgctxt "@action:inmenu menubar:profile" @@ -3955,17 +3978,17 @@ msgstr "重新載入所有模型（&L）" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:351 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models To All Build Plates" -msgstr "" +msgstr "將所有模型排列到所有列印平台上" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:358 msgctxt "@action:inmenu menubar:edit" msgid "Arrange All Models" -msgstr "編位所有的模型" +msgstr "排列所有模型" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:366 msgctxt "@action:inmenu menubar:edit" msgid "Arrange Selection" -msgstr "為所選模型編位" +msgstr "排列所選模型" #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:373 msgctxt "@action:inmenu menubar:edit" @@ -4015,7 +4038,7 @@ msgstr "安裝外掛..." #: /home/ruben/Projects/Cura/resources/qml/Actions.qml:438 msgctxt "@action:inmenu menubar:view" msgid "Expand/Collapse Sidebar" -msgstr "" +msgstr "展開/收合側邊欄" #: /home/ruben/Projects/Cura/resources/qml/SaveButton.qml:26 msgctxt "@label:PrintjobStatus" @@ -4050,12 +4073,12 @@ msgstr "切片無法使用" #: /home/ruben/Projects/Cura/resources/qml/SaveButton.qml:171 msgctxt "@info:tooltip" msgid "Slice current printjob" -msgstr "" +msgstr "對目前列印工作進行切片" #: /home/ruben/Projects/Cura/resources/qml/SaveButton.qml:171 msgctxt "@info:tooltip" msgid "Cancel slicing process" -msgstr "" +msgstr "取消進行中的切片程序" #: /home/ruben/Projects/Cura/resources/qml/SaveButton.qml:183 msgctxt "@label:Printjob" @@ -4111,7 +4134,7 @@ msgstr "另存為（&A）…" #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:139 msgctxt "@title:menu menubar:file" msgid "Save &Project..." -msgstr "" +msgstr "儲存專案...(&P)" #: /home/ruben/Projects/Cura/resources/qml/Cura.qml:162 msgctxt "@title:menu menubar:toplevel" @@ -4349,7 +4372,7 @@ msgstr "耗材" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:352 msgctxt "@label" msgid "Check compatibility" -msgstr "" +msgstr "檢查相容性" #: /home/ruben/Projects/Cura/resources/qml/SidebarHeader.qml:372 msgctxt "@tooltip" @@ -4359,17 +4382,17 @@ msgstr "點擊查看 Ultimaker.com 上的耗材相容性。" #: /home/ruben/Projects/Cura/resources/qml/ObjectsList.qml:211 msgctxt "@option:check" msgid "See only current build plate" -msgstr "" +msgstr "只顯示目前的列印平台" #: /home/ruben/Projects/Cura/resources/qml/ObjectsList.qml:227 msgctxt "@action:button" msgid "Arrange to all build plates" -msgstr "" +msgstr "擺放到所有的列印平台" #: /home/ruben/Projects/Cura/resources/qml/ObjectsList.qml:247 msgctxt "@action:button" msgid "Arrange current build plate" -msgstr "" +msgstr "擺放到目前的列印平台" #: MachineSettingsAction/plugin.json msgctxt "description" @@ -4444,7 +4467,7 @@ msgstr "更新日誌" #: ProfileFlattener/plugin.json msgctxt "description" msgid "Create a flattend quality changes profile." -msgstr "創建一份合併品質變化列印參數。" +msgstr "建立一份合併品質變化列印參數。" #: ProfileFlattener/plugin.json msgctxt "name" @@ -4464,22 +4487,22 @@ msgstr "USB 連線列印" #: PrepareStage/plugin.json msgctxt "description" msgid "Provides a prepare stage in Cura." -msgstr "" +msgstr "在 cura 提供一個準備介面。" #: PrepareStage/plugin.json msgctxt "name" msgid "Prepare Stage" -msgstr "" +msgstr "準備介面" #: CuraLiveScriptingPlugin/plugin.json msgctxt "description" msgid "Provides an edit window for direct script editing." -msgstr "" +msgstr "提供一個直接編輯描述檔的編輯視窗。" #: CuraLiveScriptingPlugin/plugin.json msgctxt "name" msgid "Live scripting tool" -msgstr "" +msgstr "即時描述檔工具" #: RemovableDriveOutputDevice/plugin.json msgctxt "description" @@ -4504,12 +4527,12 @@ msgstr "UM3 網路連接" #: MonitorStage/plugin.json msgctxt "description" msgid "Provides a monitor stage in Cura." -msgstr "" +msgstr "在 cura 提供一個監控介面。" #: MonitorStage/plugin.json msgctxt "name" msgid "Monitor Stage" -msgstr "" +msgstr "監控介面" #: FirmwareUpdateChecker/plugin.json msgctxt "description" @@ -4524,7 +4547,7 @@ msgstr "韌體更新檢查" #: CuraSolidWorksPlugin/plugin.json msgctxt "description" msgid "Gives you the possibility to open certain files using SolidWorks itself. Conversion is done by this plugin and additional optimizations." -msgstr "" +msgstr "讓你可以使用 SolidWorks 開啟某些檔案。此外掛會完成轉換和最佳化的工作。" #: CuraSolidWorksPlugin/plugin.json msgctxt "name" @@ -4594,12 +4617,12 @@ msgstr "舊版 Cura 列印參數讀取器" #: CuraBlenderPlugin/plugin.json msgctxt "description" msgid "Helps to open Blender files directly in Cura." -msgstr "" +msgstr "協助你直接在 Cura 中打開 Blender 檔案。" #: CuraBlenderPlugin/plugin.json msgctxt "name" msgid "Blender Integration (experimental)" -msgstr "" +msgstr "Blender 整合（實驗功能）" #: GCodeProfileReader/plugin.json msgctxt "description" @@ -4764,12 +4787,12 @@ msgstr "Cura 列印參數寫入器" #: CuraPrintProfileCreator/plugin.json msgctxt "description" msgid "Allows material manufacturers to create new material and quality profiles using a drop-in UI." -msgstr "" +msgstr "允許耗材製造商使用下拉式 UI 建立新的耗材和品質設定參數。" #: CuraPrintProfileCreator/plugin.json msgctxt "name" msgid "Print Profile Assistant" -msgstr "" +msgstr "列印參數設定助手" #: 3MFWriter/plugin.json msgctxt "description" diff --git a/resources/i18n/zh_TW/fdmprinter.def.json.po b/resources/i18n/zh_TW/fdmprinter.def.json.po index 7c9d882750..a20c882f5d 100644 --- a/resources/i18n/zh_TW/fdmprinter.def.json.po +++ b/resources/i18n/zh_TW/fdmprinter.def.json.po @@ -1,21 +1,21 @@ # Cura JSON setting files -# Copyright (C) 2017 Ultimaker +# Copyright (C) 2018 Ultimaker # This file is distributed under the same license as the Cura package. -# Ruben Dulek , 2017. +# Ruben Dulek , 2018. # msgid "" msgstr "" -"Project-Id-Version: Cura 3.1\n" +"Project-Id-Version: Cura 3.2\n" "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n" -"POT-Creation-Date: 2017-08-02 16:53+0000\n" -"PO-Revision-Date: 2017-11-25 00:31+0800\n" +"POT-Creation-Date: 2018-01-29 16:53+0000\n" +"PO-Revision-Date: 2018-02-01 20:58+0800\n" "Last-Translator: Zhang Heh Ji \n" -"Language-Team: TEAM\n" +"Language-Team: Zhang Heh Ji \n" "Language: zh_TW\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" -"X-Generator: Poedit 2.0.4\n" +"X-Generator: Poedit 2.0.6\n" #: fdmprinter.def.json msgctxt "machine_settings label" @@ -353,12 +353,12 @@ msgstr "Repetier" #: fdmprinter.def.json msgctxt "machine_firmware_retract label" msgid "Firmware Retraction" -msgstr "" +msgstr "韌體回抽" #: fdmprinter.def.json msgctxt "machine_firmware_retract description" msgid "Whether to use firmware retract commands (G10/G11) instead of using the E property in G1 commands to retract the material." -msgstr "" +msgstr "是否使用韌體回抽命令（G10/G11）取代 G1 命令的 E 參數來回抽線材。" #: fdmprinter.def.json msgctxt "machine_disallowed_areas label" @@ -1053,12 +1053,12 @@ msgstr "全部填充" #: fdmprinter.def.json msgctxt "filter_out_tiny_gaps label" msgid "Filter Out Tiny Gaps" -msgstr "" +msgstr "濾除微小間隙" #: fdmprinter.def.json msgctxt "filter_out_tiny_gaps description" msgid "Filter out tiny gaps to reduce blobs on outside of model." -msgstr "" +msgstr "濾除微小間隙以減少模型外側的斑點 。" #: fdmprinter.def.json msgctxt "fill_outline_gaps label" @@ -1443,7 +1443,7 @@ msgstr "填充 X 軸偏移" #: fdmprinter.def.json msgctxt "infill_offset_x description" msgid "The infill pattern is moved this distance along the X axis." -msgstr "" +msgstr "填充樣式在 X 軸方向平移此距離。" #: fdmprinter.def.json msgctxt "infill_offset_y label" @@ -1453,7 +1453,7 @@ msgstr "填充 Y 軸偏移" #: fdmprinter.def.json msgctxt "infill_offset_y description" msgid "The infill pattern is moved this distance along the Y axis." -msgstr "" +msgstr "填充樣式在 Y 軸方向平移此距離。" #: fdmprinter.def.json msgctxt "sub_div_rad_add label" @@ -1473,7 +1473,7 @@ msgstr "填充重疊百分比" #: fdmprinter.def.json msgctxt "infill_overlap description" msgid "The amount of overlap between the infill and the walls as a percentage of the infill line width. A slight overlap allows the walls to connect firmly to the infill." -msgstr "" +msgstr "填充與牆壁的重疊量佔填充線寬的百分比。輕微的重疊能讓填充與牆壁牢固地連接。" #: fdmprinter.def.json msgctxt "infill_overlap_mm label" @@ -1493,7 +1493,7 @@ msgstr "表層重疊百分比" #: fdmprinter.def.json msgctxt "skin_overlap description" msgid "The amount of overlap between the skin and the walls as a percentage of the skin line width. A slight overlap allows the walls to connect firmly to the skin. This is a percentage of the average line widths of the skin lines and the innermost wall." -msgstr "" +msgstr "表層與牆壁的重疊量佔表層線寬的百分比。輕微的重疊能讓填充與表層牢固地連接。這是表層線寬和最內層牆壁線寬平均的百分比。" #: fdmprinter.def.json msgctxt "skin_overlap_mm label" @@ -1723,7 +1723,7 @@ msgstr "列印平台溫度" #: fdmprinter.def.json msgctxt "material_bed_temperature description" msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted." -msgstr "" +msgstr "設定列印平台的溫度。如果設定為 0，就不會加熱列印平台。" #: fdmprinter.def.json msgctxt "material_bed_temperature_layer_0 label" @@ -4267,82 +4267,82 @@ msgstr "實驗性！" #: fdmprinter.def.json msgctxt "support_tree_enable label" msgid "Tree Support" -msgstr "" +msgstr "樹狀支撐" #: fdmprinter.def.json msgctxt "support_tree_enable description" msgid "Generate a tree-like support with branches that support your print. This may reduce material usage and print time, but greatly increases slicing time." -msgstr "" +msgstr "產生帶有樹枝樹狀支撐結構支撐你的模型。這可能可以減少耗材的使用和列印的時間，但會大大的增加切片時間。" #: fdmprinter.def.json msgctxt "support_tree_angle label" msgid "Tree Support Branch Angle" -msgstr "" +msgstr "樹狀支撐樹枝角度" #: fdmprinter.def.json msgctxt "support_tree_angle description" msgid "The angle of the branches. Use a lower angle to make them more vertical and more stable. Use a higher angle to be able to have more reach." -msgstr "" +msgstr "樹枝的角度。使用較小的角度讓樹枝較垂直且較平穩。使用較大的角度則可以支撐較大的範圍。" #: fdmprinter.def.json msgctxt "support_tree_branch_distance label" msgid "Tree Support Branch Distance" -msgstr "" +msgstr "樹狀支撐樹枝距離" #: fdmprinter.def.json msgctxt "support_tree_branch_distance description" msgid "How far apart the branches need to be when they touch the model. Making this distance small will cause the tree support to touch the model at more points, causing better overhang but making support harder to remove." -msgstr "" +msgstr "樹支與模型接觸的點與點之間的間隔距離。較小的距離會讓支撐和模型有較多的接觸點，會有較佳的懸垂但支撐也較難移除。" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter label" msgid "Tree Support Branch Diameter" -msgstr "" +msgstr "樹狀支撐樹枝直徑" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter description" msgid "The diameter of the thinnest branches of tree support. Thicker branches are more sturdy. Branches towards the base will be thicker than this." -msgstr "" +msgstr "樹狀支撐中最細樹枝的直徑。越粗的樹枝越堅固。底部的樹枝會比這更粗。" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter_angle label" msgid "Tree Support Branch Diameter Angle" -msgstr "" +msgstr "樹狀支撐樹枝外徑角度" #: fdmprinter.def.json msgctxt "support_tree_branch_diameter_angle description" msgid "The angle of the branches' diameter as they gradually become thicker towards the bottom. An angle of 0 will cause the branches to have uniform thickness over their length. A bit of an angle can increase stability of the tree support." -msgstr "" +msgstr "樹枝向底部逐漸變粗時，外徑變化的角度。設為 0 可讓整條樹枝的粗細一致, 而有點角度可增加樹狀支撐的穩定性。" #: fdmprinter.def.json msgctxt "support_tree_collision_resolution label" msgid "Tree Support Collision Resolution" -msgstr "" +msgstr "樹狀支撐碰撞計算精度" #: fdmprinter.def.json msgctxt "support_tree_collision_resolution description" msgid "Resolution to compute collisions with to avoid hitting the model. Setting this lower will produce more accurate trees that fail less often, but increases slicing time dramatically." -msgstr "" +msgstr "計算避免碰撞模型的計算精度。設定較低的值可產生較精確的樹狀支撐，這樣的支撐問題較少但會嚴重的增加切片所需的時間。" #: fdmprinter.def.json msgctxt "support_tree_wall_thickness label" msgid "Tree Support Wall Thickness" -msgstr "" +msgstr "樹狀支撐牆厚" #: fdmprinter.def.json msgctxt "support_tree_wall_thickness description" msgid "The thickness of the walls of the branches of tree support. Thicker walls take longer to print but don't fall over as easily." -msgstr "" +msgstr "樹狀支撐樹枝的牆壁厚度。較厚的牆壁需要花較長的時間列印，但較不易倒下。" #: fdmprinter.def.json msgctxt "support_tree_wall_count label" msgid "Tree Support Wall Line Count" -msgstr "" +msgstr "樹狀支撐牆壁線條數量" #: fdmprinter.def.json msgctxt "support_tree_wall_count description" msgid "The number of walls of the branches of tree support. Thicker walls take longer to print but don't fall over as easily." -msgstr "" +msgstr "樹狀支撐樹枝牆壁的圈數。較厚的牆壁需要花較長的時間列印，但較不易倒下。" #: fdmprinter.def.json msgctxt "slicing_tolerance label" @@ -4417,12 +4417,12 @@ msgstr "當頂部表層採用線條或鋸齒狀的列印樣式時使用的整數 #: fdmprinter.def.json msgctxt "infill_enable_travel_optimization label" msgid "Infill Travel Optimization" -msgstr "" +msgstr "填充空跑最佳化" #: fdmprinter.def.json msgctxt "infill_enable_travel_optimization description" msgid "When enabled, the order in which the infill lines are printed is optimized to reduce the distance travelled. The reduction in travel time achieved very much depends on the model being sliced, infill pattern, density, etc. Note that, for some models that have many small areas of infill, the time to slice the model may be greatly increased." -msgstr "" +msgstr "當功能啟用時，填充線條的列印順序會對降低空跑距離做最佳化。所能減少的空跑時間取決於模型、填充樣式、填充密度等。請注意，對於有很多小型填充區域的模型，切片時間可能會大量增加。" #: fdmprinter.def.json msgctxt "material_flow_dependent_temperature label" @@ -5056,42 +5056,42 @@ msgstr "噴頭和水平下行線之間的距離。較大的間隙會讓斜下行 #: fdmprinter.def.json msgctxt "adaptive_layer_height_enabled label" msgid "Use adaptive layers" -msgstr "" +msgstr "使用適應層高" #: fdmprinter.def.json msgctxt "adaptive_layer_height_enabled description" msgid "Adaptive layers computes the layer heights depending on the shape of the model." -msgstr "" +msgstr "適應層高會依據模型的形狀計算列印的層高。" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation label" msgid "Adaptive layers maximum variation" -msgstr "" +msgstr "適應層高最大變化量" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation description" msgid "The maximum allowed height different from the base layer height in mm." -msgstr "" +msgstr "允許與層高基礎值相差的最大值（以毫米為單位）。" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation_step label" msgid "Adaptive layers variation step size" -msgstr "" +msgstr "適應層高變化幅度" #: fdmprinter.def.json msgctxt "adaptive_layer_height_variation_step description" msgid "The difference in height of the next layer height compared to the previous one." -msgstr "" +msgstr "下一列印層與前一列印層的層高差。" #: fdmprinter.def.json msgctxt "adaptive_layer_height_threshold label" msgid "Adaptive layers threshold" -msgstr "" +msgstr "適應層高門檻值" #: fdmprinter.def.json msgctxt "adaptive_layer_height_threshold description" msgid "Threshold whether to use a smaller layer or not. This number is compared to the tan of the steepest slope in a layer." -msgstr "" +msgstr "決定是否使用較小層高的門檻值。此值會與一層中最陡坡度的 tan 值做比較。" #: fdmprinter.def.json msgctxt "command_line_settings label" diff --git a/resources/preset_setting_visibility_groups/advanced.cfg b/resources/preset_setting_visibility_groups/advanced.cfg index 3bbe0ce065..e68ee787f5 100644 --- a/resources/preset_setting_visibility_groups/advanced.cfg +++ b/resources/preset_setting_visibility_groups/advanced.cfg @@ -8,120 +8,71 @@ weight = 2 layer_height layer_height_0 line_width +wall_line_width +wall_line_width_0 +wall_line_width_x +skin_line_width +infill_line_width +initial_layer_line_width_factor [shell] wall_extruder_nr +wall_0_extruder_nr +wall_x_extruder_nr wall_thickness -wall_0_wipe_dist -roofing_extruder_nr -roofing_layer_count +wall_line_count top_bottom_extruder_nr top_bottom_thickness -top_bottom_pattern -top_bottom_pattern_0 -skin_angles -wall_0_inset +top_thickness +top_layers +bottom_thickness +bottom_layers optimize_wall_printing_order -outer_inset_first -alternate_extra_perimeter -travel_compensate_overlapping_walls_enabled fill_perimeter_gaps -filter_out_tiny_gaps -fill_outline_gaps xy_offset -xy_offset_layer_0 -z_seam_type -z_seam_x -z_seam_y -z_seam_corner -z_seam_relative -skin_no_small_gaps_heuristic -skin_outline_count ironing_enabled -ironing_only_highest_layer -ironing_pattern -ironing_line_spacing -ironing_flow -ironing_inset -speed_ironing -acceleration_ironing -jerk_ironing [infill] infill_extruder_nr infill_sparse_density +infill_line_distance infill_pattern -zig_zaggify_infill -infill_angles -infill_offset_x -infill_offset_y -sub_div_rad_add infill_overlap -skin_overlap -infill_wipe_dist infill_sparse_thickness gradual_infill_steps -gradual_infill_step_height -infill_before_walls -min_infill_area -skin_preshrink -expand_skins_expand_distance -max_skin_angle_for_expansion [material] -default_material_print_temperature material_print_temperature material_print_temperature_layer_0 material_initial_print_temperature material_final_print_temperature -material_extrusion_cool_down_speed -default_material_bed_temperature material_bed_temperature material_bed_temperature_layer_0 -material_diameter -material_adhesion_tendency -material_surface_energy -material_flow retraction_enable retract_at_layer_change retraction_amount retraction_speed -retraction_extra_prime_amount -retraction_min_travel -retraction_count_max -retraction_extrusion_window material_standby_temperature -switch_extruder_retraction_amount -switch_extruder_retraction_speeds [speed] speed_print +speed_infill +speed_wall +speed_wall_0 +speed_wall_x +speed_topbottom +speed_support +speed_prime_tower speed_travel speed_layer_0 skirt_brim_speed -max_feedrate_z_override -speed_slowdown_layers -speed_equalize_flow_enabled -speed_equalize_flow_max acceleration_enabled -acceleration_print -acceleration_travel -acceleration_layer_0 -acceleration_skirt_brim jerk_enabled -jerk_print -jerk_travel -jerk_layer_0 -jerk_skirt_brim [travel] retraction_combing -travel_retract_before_outer_wall travel_avoid_other_parts travel_avoid_distance -start_layers_at_same_position -layer_start_x -layer_start_y retraction_hop_enabled retraction_hop_only_when_collides retraction_hop @@ -130,9 +81,12 @@ retraction_hop_after_extruder_switch [cooling] cool_fan_enabled cool_fan_speed +cool_fan_speed_min +cool_fan_speed_max cool_min_layer_time_fan_speed_max cool_fan_speed_0 cool_fan_full_at_height +cool_fan_full_layer cool_min_layer_time cool_min_speed cool_lift_head @@ -140,115 +94,45 @@ cool_lift_head [support] support_enable support_extruder_nr +support_infill_extruder_nr +support_extruder_nr_layer_0 +support_interface_extruder_nr support_type support_angle support_pattern -support_connect_zigzags support_infill_rate -support_z_distance -support_xy_distance -support_xy_overrides_z -support_xy_distance_overhang -support_bottom_stair_step_height -support_bottom_stair_step_width -support_join_distance support_offset support_infill_sparse_thickness gradual_support_infill_steps gradual_support_infill_step_height support_interface_enable -support_interface_height -support_interface_skip_height -support_interface_density -support_interface_pattern -support_use_towers -support_tower_diameter -support_minimal_diameter -support_tower_roof_angle -support_mesh_drop_down +support_roof_enable +support_bottom_enable [platform_adhesion] prime_blob_enable -extruder_prime_pos_x -extruder_prime_pos_y adhesion_type adhesion_extruder_nr skirt_line_count -skirt_gap -skirt_brim_minimal_length brim_width +brim_line_count brim_outside_only -raft_margin -raft_smoothing -raft_airgap -layer_0_z_overlap -raft_surface_layers -raft_surface_thickness -raft_surface_line_width -raft_surface_line_spacing -raft_interface_thickness -raft_interface_line_width -raft_interface_line_spacing -raft_base_thickness -raft_base_line_width -raft_base_line_spacing -raft_speed -raft_acceleration -raft_jerk -raft_fan_speed [dual] prime_tower_enable -prime_tower_size -prime_tower_min_volume prime_tower_position_x prime_tower_position_y -prime_tower_flow -prime_tower_wipe_enabled -dual_pre_wipe prime_tower_purge_volume -ooze_shield_enabled -ooze_shield_angle -ooze_shield_dist [meshfix] -meshfix_union_all -meshfix_union_all_remove_holes -meshfix_extensive_stitching -meshfix_keep_open_polygons -multiple_mesh_overlap -carve_multiple_volumes -alternate_carve_order -remove_empty_first_layers [blackmagic] print_sequence -infill_mesh -infill_mesh_order -cutting_mesh -mold_enabled -mold_width -mold_roof_height -mold_angle -support_mesh -anti_overhang_mesh magic_mesh_surface_mode magic_spiralize smooth_spiralized_contours -relative_extrusion [experimental] -infill_enable_travel_optimization -material_flow_dependent_temperature -material_flow_temp_graph -meshfix_maximum_resolution -roofing_angles -roofing_pattern -slicing_tolerance -support_tree_angle -support_tree_branch_diameter -support_tree_branch_diameter_angle -support_tree_branch_distance -support_tree_collision_resolution -support_tree_enable -support_tree_wall_thickness +conical_overhang_enabled +support_conical_enabled +adaptive_layer_height_enabled diff --git a/resources/preset_setting_visibility_groups/basic.cfg b/resources/preset_setting_visibility_groups/basic.cfg index 062feb9189..4196a3a9e7 100644 --- a/resources/preset_setting_visibility_groups/basic.cfg +++ b/resources/preset_setting_visibility_groups/basic.cfg @@ -9,30 +9,28 @@ layer_height [shell] wall_thickness +wall_line_count top_bottom_thickness -z_seam_x -z_seam_y +top_thickness +top_layers +bottom_thickness +bottom_layers +xy_offset [infill] infill_sparse_density -gradual_infill_steps +infill_pattern [material] material_print_temperature material_bed_temperature -material_diameter -material_flow retraction_enable [speed] speed_print -speed_travel -acceleration_print -acceleration_travel -jerk_print -jerk_travel [travel] +retraction_hop_enabled [cooling] cool_fan_enabled @@ -41,26 +39,20 @@ cool_fan_enabled support_enable support_extruder_nr support_type +support_angle [platform_adhesion] +prime_blob_enable adhesion_type adhesion_extruder_nr -brim_width -raft_airgap -layer_0_z_overlap -raft_surface_layers [dual] prime_tower_enable -prime_tower_size prime_tower_position_x prime_tower_position_y [meshfix] [blackmagic] -print_sequence -infill_mesh -cutting_mesh -[experimental] \ No newline at end of file +[experimental] diff --git a/resources/preset_setting_visibility_groups/expert.cfg b/resources/preset_setting_visibility_groups/expert.cfg index 1be5ca7804..e180b831d8 100644 --- a/resources/preset_setting_visibility_groups/expert.cfg +++ b/resources/preset_setting_visibility_groups/expert.cfg @@ -8,15 +8,33 @@ weight = 3 layer_height layer_height_0 line_width +wall_line_width +wall_line_width_0 +wall_line_width_x +skin_line_width +infill_line_width +skirt_brim_line_width +support_line_width +support_interface_line_width +support_roof_line_width +support_bottom_line_width +prime_tower_line_width +initial_layer_line_width_factor [shell] wall_extruder_nr +wall_0_extruder_nr +wall_x_extruder_nr wall_thickness +wall_line_count wall_0_wipe_dist -roofing_extruder_nr roofing_layer_count top_bottom_extruder_nr top_bottom_thickness +top_thickness +top_layers +bottom_thickness +bottom_layers top_bottom_pattern top_bottom_pattern_0 skin_angles @@ -25,6 +43,8 @@ optimize_wall_printing_order outer_inset_first alternate_extra_perimeter travel_compensate_overlapping_walls_enabled +travel_compensate_overlapping_walls_0_enabled +travel_compensate_overlapping_walls_x_enabled fill_perimeter_gaps filter_out_tiny_gaps fill_outline_gaps @@ -50,6 +70,7 @@ jerk_ironing [infill] infill_extruder_nr infill_sparse_density +infill_line_distance infill_pattern zig_zaggify_infill infill_angles @@ -57,7 +78,9 @@ infill_offset_x infill_offset_y sub_div_rad_add infill_overlap +infill_overlap_mm skin_overlap +skin_overlap_mm infill_wipe_dist infill_sparse_thickness gradual_infill_steps @@ -65,8 +88,13 @@ gradual_infill_step_height infill_before_walls min_infill_area skin_preshrink +top_skin_preshrink +bottom_skin_preshrink expand_skins_expand_distance +top_skin_expand_distance +bottom_skin_expand_distance max_skin_angle_for_expansion +min_skin_width_for_expansion [material] default_material_print_temperature @@ -75,17 +103,19 @@ material_print_temperature_layer_0 material_initial_print_temperature material_final_print_temperature material_extrusion_cool_down_speed -default_material_bed_temperature material_bed_temperature material_bed_temperature_layer_0 material_diameter material_adhesion_tendency material_surface_energy material_flow +material_flow_layer_0 retraction_enable retract_at_layer_change retraction_amount retraction_speed +retraction_retract_speed +retraction_prime_speed retraction_extra_prime_amount retraction_min_travel retraction_count_max @@ -93,11 +123,25 @@ retraction_extrusion_window material_standby_temperature switch_extruder_retraction_amount switch_extruder_retraction_speeds +switch_extruder_retraction_speed +switch_extruder_prime_speed [speed] speed_print +speed_infill +speed_wall +speed_wall_0 +speed_wall_x +speed_roofing +speed_topbottom +speed_support +speed_support_infill +speed_support_interface +speed_prime_tower speed_travel speed_layer_0 +speed_print_layer_0 +speed_travel_layer_0 skirt_brim_speed max_feedrate_z_override speed_slowdown_layers @@ -105,13 +149,37 @@ speed_equalize_flow_enabled speed_equalize_flow_max acceleration_enabled acceleration_print +acceleration_infill +acceleration_wall +acceleration_wall_0 +acceleration_wall_x +acceleration_roofing +acceleration_topbottom +acceleration_support +acceleration_support_infill +acceleration_support_interface +acceleration_prime_tower acceleration_travel acceleration_layer_0 +acceleration_print_layer_0 +acceleration_travel_layer_0 acceleration_skirt_brim jerk_enabled jerk_print +jerk_infill +jerk_wall +jerk_wall_0 +jerk_wall_x +jerk_roofing +jerk_topbottom +jerk_support +jerk_support_infill +jerk_support_interface +jerk_prime_tower jerk_travel jerk_layer_0 +jerk_print_layer_0 +jerk_travel_layer_0 jerk_skirt_brim [travel] @@ -130,9 +198,12 @@ retraction_hop_after_extruder_switch [cooling] cool_fan_enabled cool_fan_speed +cool_fan_speed_min +cool_fan_speed_max cool_min_layer_time_fan_speed_max cool_fan_speed_0 cool_fan_full_at_height +cool_fan_full_layer cool_min_layer_time cool_min_speed cool_lift_head @@ -140,12 +211,21 @@ cool_lift_head [support] support_enable support_extruder_nr +support_infill_extruder_nr +support_extruder_nr_layer_0 +support_interface_extruder_nr +support_roof_extruder_nr +support_bottom_extruder_nr support_type support_angle support_pattern +zig_zaggify_support support_connect_zigzags support_infill_rate +support_line_distance support_z_distance +support_top_distance +support_bottom_distance support_xy_distance support_xy_overrides_z support_xy_distance_overhang @@ -157,9 +237,15 @@ support_infill_sparse_thickness gradual_support_infill_steps gradual_support_infill_step_height support_interface_enable +support_roof_enable +support_bottom_enable support_interface_height +support_roof_height +support_bottom_height support_interface_skip_height support_interface_density +support_roof_density +support_bottom_density support_interface_pattern support_use_towers support_tower_diameter @@ -169,19 +255,17 @@ support_mesh_drop_down [platform_adhesion] prime_blob_enable -extruder_prime_pos_x -extruder_prime_pos_y adhesion_type adhesion_extruder_nr skirt_line_count skirt_gap skirt_brim_minimal_length brim_width +brim_line_count brim_outside_only raft_margin raft_smoothing raft_airgap -layer_0_z_overlap raft_surface_layers raft_surface_thickness raft_surface_line_width @@ -199,8 +283,10 @@ raft_fan_speed [dual] prime_tower_enable +prime_tower_circular prime_tower_size prime_tower_min_volume +prime_tower_wall_thickness prime_tower_position_x prime_tower_position_y prime_tower_flow @@ -238,8 +324,25 @@ smooth_spiralized_contours relative_extrusion [experimental] +support_tree_enable +support_tree_angle +support_tree_branch_distance +support_tree_branch_diameter +support_tree_branch_diameter_angle +support_tree_collision_resolution +support_tree_wall_thickness +support_tree_wall_count +slicing_tolerance +roofing_line_width +roofing_pattern +roofing_angles +infill_enable_travel_optimization +material_flow_dependent_temperature +material_flow_temp_graph +meshfix_maximum_resolution support_skip_some_zags support_skip_zag_per_mm +support_zag_skip_count draft_shield_enabled draft_shield_dist draft_shield_height_limitation @@ -267,19 +370,34 @@ infill_hollow magic_fuzzy_skin_enabled magic_fuzzy_skin_thickness magic_fuzzy_skin_point_density +magic_fuzzy_skin_point_dist flow_rate_max_extrusion_offset flow_rate_extrusion_offset_factor -infill_enable_travel_optimization -material_flow_dependent_temperature -material_flow_temp_graph -meshfix_maximum_resolution -roofing_angles -roofing_pattern -slicing_tolerance -support_tree_angle -support_tree_branch_diameter -support_tree_branch_diameter_angle -support_tree_branch_distance -support_tree_collision_resolution -support_tree_enable -support_tree_wall_thickness +wireframe_enabled +wireframe_height +wireframe_roof_inset +wireframe_printspeed +wireframe_printspeed_bottom +wireframe_printspeed_up +wireframe_printspeed_down +wireframe_printspeed_flat +wireframe_flow +wireframe_flow_connection +wireframe_flow_flat +wireframe_top_delay +wireframe_bottom_delay +wireframe_flat_delay +wireframe_up_half_speed +wireframe_top_jump +wireframe_fall_down +wireframe_drag_along +wireframe_strategy +wireframe_straight_before_down +wireframe_roof_fall_down +wireframe_roof_drag_along +wireframe_roof_outer_delay +wireframe_nozzle_clearance +adaptive_layer_height_enabled +adaptive_layer_height_variation +adaptive_layer_height_variation_step +adaptive_layer_height_threshold diff --git a/resources/qml/Actions.qml b/resources/qml/Actions.qml index 05ff5050e9..7002711614 100644 --- a/resources/qml/Actions.qml +++ b/resources/qml/Actions.qml @@ -69,7 +69,6 @@ Item property alias configureSettingVisibility: configureSettingVisibilityAction property alias browsePlugins: browsePluginsAction - property alias configurePlugins: configurePluginsAction UM.I18nCatalog{id: catalog; name:"cura"} @@ -173,7 +172,7 @@ Item Action { id: updateProfileAction; - enabled: !Cura.MachineManager.stacksHaveErrors && Cura.MachineManager.hasUserSettings && !Cura.MachineManager.isReadOnly(Cura.MachineManager.activeQualityId) + enabled: !Cura.MachineManager.stacksHaveErrors && Cura.MachineManager.hasUserSettings && Cura.MachineManager.activeQualityChangesGroup != null text: catalog.i18nc("@action:inmenu menubar:profile","&Update profile with current settings/overrides"); onTriggered: Cura.ContainerManager.updateQualityChanges(); } @@ -237,6 +236,16 @@ Item onTriggered: CuraActions.deleteSelection(); } + Action //Also add backspace as the same function as delete because on Macintosh keyboards the button called "delete" is actually a backspace, and the user expects it to function as a delete. + { + id: backspaceSelectionAction + text: catalog.i18ncp("@action:inmenu menubar:edit", "Delete &Selected Model", "Delete &Selected Models", UM.Selection.selectionCount) + enabled: UM.Controller.toolsEnabled && UM.Selection.hasSelection + iconName: "edit-delete" + shortcut: StandardKey.Backspace + onTriggered: CuraActions.deleteSelection() + } + Action { id: centerSelectionAction; @@ -425,13 +434,6 @@ Item iconName: "plugins_browse" } - Action - { - id: configurePluginsAction - text: catalog.i18nc("@action:menu", "Installed plugins..."); - iconName: "plugins_configure" - } - Action { id: expandSidebarAction; diff --git a/resources/qml/Cura.qml b/resources/qml/Cura.qml index 799797f9f9..a8066e01e4 100644 --- a/resources/qml/Cura.qml +++ b/resources/qml/Cura.qml @@ -190,24 +190,25 @@ UM.MainWindow model: Cura.ExtrudersModel { simpleNames: true } Menu { title: model.name - visible: machineExtruderCount.properties.value > 1 NozzleMenu { title: Cura.MachineManager.activeDefinitionVariantsName; visible: Cura.MachineManager.hasVariants; extruderIndex: index } MaterialMenu { title: catalog.i18nc("@title:menu", "&Material"); visible: Cura.MachineManager.hasMaterials; extruderIndex: index } - ProfileMenu { title: catalog.i18nc("@title:menu", "&Profile"); } - MenuSeparator { } + MenuSeparator { + visible: Cura.MachineManager.hasVariants || Cura.MachineManager.hasMaterials + } - MenuItem { text: catalog.i18nc("@action:inmenu", "Set as Active Extruder"); onTriggered: Cura.ExtruderManager.setActiveExtruderIndex(model.index) } + MenuItem { + text: catalog.i18nc("@action:inmenu", "Set as Active Extruder") + onTriggered: Cura.ExtruderManager.setActiveExtruderIndex(model.index) + } } onObjectAdded: settingsMenu.insertItem(index, object) onObjectRemoved: settingsMenu.removeItem(object) } BuildplateMenu { title: catalog.i18nc("@title:menu", "&Build plate"); visible: Cura.MachineManager.hasVariantBuildplates } - NozzleMenu { title: Cura.MachineManager.activeDefinitionVariantsName; visible: machineExtruderCount.properties.value <= 1 && Cura.MachineManager.hasVariants } - MaterialMenu { title: catalog.i18nc("@title:menu", "&Material"); visible: machineExtruderCount.properties.value <= 1 && Cura.MachineManager.hasMaterials } - ProfileMenu { title: catalog.i18nc("@title:menu", "&Profile"); visible: machineExtruderCount.properties.value <= 1 } + ProfileMenu { title: catalog.i18nc("@title:menu", "&Profile"); } MenuSeparator { } @@ -254,7 +255,6 @@ UM.MainWindow title: catalog.i18nc("@title:menu menubar:toplevel", "P&lugins") MenuItem { action: Cura.Actions.browsePlugins } - MenuItem { action: Cura.Actions.configurePlugins } } Menu @@ -477,6 +477,14 @@ UM.MainWindow collapseSidebarAnimation.start(); } } + + MouseArea + { + visible: UM.Controller.activeStage.sidebarComponent != "" + anchors.fill: parent + acceptedButtons: Qt.AllButtons + onWheel: wheel.accepted = true + } } UM.MessageStack diff --git a/resources/qml/DiscardOrKeepProfileChangesDialog.qml b/resources/qml/DiscardOrKeepProfileChangesDialog.qml index 915a11fde2..afa9fda0bd 100644 --- a/resources/qml/DiscardOrKeepProfileChangesDialog.qml +++ b/resources/qml/DiscardOrKeepProfileChangesDialog.qml @@ -7,7 +7,7 @@ import QtQuick.Dialogs 1.2 import QtQuick.Window 2.1 import UM 1.2 as UM -import Cura 1.1 as Cura +import Cura 1.0 as Cura UM.Dialog { diff --git a/resources/qml/Menus/BuildplateMenu.qml b/resources/qml/Menus/BuildplateMenu.qml index 4b85aa9e93..b924aa0879 100644 --- a/resources/qml/Menus/BuildplateMenu.qml +++ b/resources/qml/Menus/BuildplateMenu.qml @@ -1,8 +1,8 @@ // Copyright (c) 2018 Ultimaker B.V. // Cura is released under the terms of the LGPLv3 or higher. -import QtQuick 2.2 -import QtQuick.Controls 1.1 +import QtQuick 2.7 +import QtQuick.Controls 1.4 import UM 1.2 as UM import Cura 1.0 as Cura @@ -12,28 +12,22 @@ Menu id: menu title: "Build plate" + property var buildPlateModel: CuraApplication.getBuildPlateModel() + Instantiator { - id: buildplateInstantiator - model: UM.InstanceContainersModel - { - filter: - { - "type": "variant", - "hardware_type": "buildplate", - "definition": Cura.MachineManager.activeDefinitionId //Only show variants of this machine - } - } + model: menu.buildPlateModel + MenuItem { text: model.name checkable: true - checked: model.id == Cura.MachineManager.globalVariantId + checked: model.name == Cura.MachineManager.globalVariantName exclusiveGroup: group - onTriggered: - { - Cura.MachineManager.setActiveVariantBuildplate(model.id); + onTriggered: { + Cura.MachineManager.setGlobalVariant(model.container_node); } } + onObjectAdded: menu.insertItem(index, object) onObjectRemoved: menu.removeItem(object) } diff --git a/resources/qml/Menus/ContextMenu.qml b/resources/qml/Menus/ContextMenu.qml index b5f51f4d63..83302f9463 100644 --- a/resources/qml/Menus/ContextMenu.qml +++ b/resources/qml/Menus/ContextMenu.qml @@ -7,7 +7,7 @@ import QtQuick.Dialogs 1.2 import QtQuick.Window 2.1 import UM 1.2 as UM -import Cura 1.2 as Cura +import Cura 1.0 as Cura Menu { @@ -15,6 +15,8 @@ Menu property bool shouldShowExtruders: machineExtruderCount.properties.value > 1; + property var multiBuildPlateModel: CuraApplication.getMultiBuildPlateModel() + // Selection-related actions. MenuItem { action: Cura.Actions.centerSelection; } MenuItem { action: Cura.Actions.deleteSelection; } @@ -45,13 +47,13 @@ Menu Instantiator { - model: Cura.BuildPlateModel + model: base.multiBuildPlateModel MenuItem { enabled: UM.Selection.hasSelection - text: Cura.BuildPlateModel.getItem(index).name; - onTriggered: CuraActions.setBuildPlateForSelection(Cura.BuildPlateModel.getItem(index).buildPlateNumber); + text: base.multiBuildPlateModel.getItem(index).name; + onTriggered: CuraActions.setBuildPlateForSelection(base.multiBuildPlateModel.getItem(index).buildPlateNumber); checkable: true - checked: Cura.BuildPlateModel.selectionBuildPlates.indexOf(Cura.BuildPlateModel.getItem(index).buildPlateNumber) != -1; + checked: base.multiBuildPlateModel.selectionBuildPlates.indexOf(base.multiBuildPlateModel.getItem(index).buildPlateNumber) != -1; visible: UM.Preferences.getValue("cura/use_multi_build_plate") } onObjectAdded: base.insertItem(index, object); @@ -62,7 +64,7 @@ Menu enabled: UM.Selection.hasSelection text: "New build plate"; onTriggered: { - CuraActions.setBuildPlateForSelection(Cura.BuildPlateModel.maxBuildPlate + 1); + CuraActions.setBuildPlateForSelection(base.multiBuildPlateModel.maxBuildPlate + 1); checked = false; } checkable: true diff --git a/resources/qml/Menus/MaterialMenu.qml b/resources/qml/Menus/MaterialMenu.qml index 3d04649f11..d81e0c86c3 100644 --- a/resources/qml/Menus/MaterialMenu.qml +++ b/resources/qml/Menus/MaterialMenu.qml @@ -1,8 +1,8 @@ // Copyright (c) 2018 Ultimaker B.V. // Cura is released under the terms of the LGPLv3 or higher. -import QtQuick 2.2 -import QtQuick.Controls 1.1 +import QtQuick 2.7 +import QtQuick.Controls 1.4 import UM 1.2 as UM import Cura 1.0 as Cura @@ -13,64 +13,6 @@ Menu title: "Material" property int extruderIndex: 0 - property bool printerConnected: Cura.MachineManager.printerOutputDevices.length != 0 - property bool isClusterPrinter: - { - if(Cura.MachineManager.printerOutputDevices.length == 0) - { - return false; - } - var clusterSize = Cura.MachineManager.printerOutputDevices[0].clusterSize; - // This is not a cluster printer or the cluster it is just one printer - if(clusterSize == undefined || clusterSize == 1) - { - return false; - } - return true; - } - - UM.SettingPropertyProvider - { - id: materialDiameterProvider - - containerStackId: Cura.ExtruderManager.activeExtruderStackId - key: "material_diameter" - watchedProperties: [ "value" ] - storeIndex: 5 - } - - MenuItem - { - id: automaticMaterial - text: - { - if(visible) - { - var materialName = Cura.MachineManager.printerOutputDevices[0].materialNames[extruderIndex]; - return catalog.i18nc("@title:menuitem %1 is the automatically selected material", "Automatic: %1").arg(materialName); - } - return ""; - } - visible: printerConnected && Cura.MachineManager.printerOutputDevices[0].materialNames != undefined && Cura.MachineManager.printerOutputDevices[0].materialNames.length > extruderIndex && !isClusterPrinter - onTriggered: - { - var materialId = Cura.MachineManager.printerOutputDevices[0].materialIds[extruderIndex]; - var items = materialsModel.items; - for(var i in items) - { - if (items[i]["metadata"]["GUID"] == materialId) - { - Cura.MachineManager.setActiveMaterial(items[i].id); - break; - } - } - } - } - - MenuSeparator - { - visible: automaticMaterial.visible - } Instantiator { @@ -79,16 +21,11 @@ Menu { text: model.name checkable: true - checked: model.id == Cura.MachineManager.allActiveMaterialIds[Cura.ExtruderManager.extruderIds[extruderIndex]] + checked: model.root_material_id == Cura.MachineManager.currentRootMaterialId[extruderIndex] exclusiveGroup: group onTriggered: { - // This workaround is done because of the application menus for materials and variants for multiextrusion printers. - // The extruder menu would always act on the correspoding extruder only, instead of acting on the extruder selected in the UI. - var activeExtruderIndex = Cura.ExtruderManager.activeExtruderIndex; - Cura.ExtruderManager.setActiveExtruderIndex(extruderIndex); - Cura.MachineManager.setActiveMaterial(model.id); - Cura.ExtruderManager.setActiveExtruderIndex(activeExtruderIndex); + Cura.MachineManager.setMaterial(extruderIndex, model.container_node); } } onObjectAdded: menu.insertItem(index, object) @@ -126,12 +63,8 @@ Menu exclusiveGroup: group onTriggered: { - // This workaround is done because of the application menus for materials and variants for multiextrusion printers. - // The extruder menu would always act on the correspoding extruder only, instead of acting on the extruder selected in the UI. var activeExtruderIndex = Cura.ExtruderManager.activeExtruderIndex; - Cura.ExtruderManager.setActiveExtruderIndex(extruderIndex); - Cura.MachineManager.setActiveMaterial(model.id); - Cura.ExtruderManager.setActiveExtruderIndex(activeExtruderIndex); + Cura.MachineManager.setMaterial(activeExtruderIndex, model.container_node); } } onObjectAdded: brandMaterialsMenu.insertItem(index, object) @@ -146,24 +79,16 @@ Menu onObjectRemoved: menu.removeItem(object) } - ListModel + Cura.GenericMaterialsModel { id: genericMaterialsModel - Component.onCompleted: populateMenuModels() + extruderPosition: menu.extruderIndex } - ListModel + Cura.BrandMaterialsModel { id: brandModel - } - - //: Model used to populate the brandModel - Cura.MaterialsModel - { - id: materialsModel - filter: materialFilter() - onModelReset: populateMenuModels() - onDataChanged: populateMenuModels() + extruderPosition: menu.extruderIndex } ExclusiveGroup { id: group } @@ -171,80 +96,4 @@ Menu MenuSeparator { } MenuItem { action: Cura.Actions.manageMaterials } - - function materialFilter() - { - var result = { "type": "material", "approximate_diameter": Math.round(materialDiameterProvider.properties.value).toString() }; - if(Cura.MachineManager.filterMaterialsByMachine) - { - result.definition = Cura.MachineManager.activeQualityDefinitionId; - if(Cura.MachineManager.hasVariants) - { - result.variant = Cura.MachineManager.activeQualityVariantId; - } - } - else - { - result.definition = "fdmprinter"; - result.compatible = true; //NB: Only checks for compatibility in global version of material, but we don't have machine-specific materials anyway. - } - return result; - } - - function populateMenuModels() - { - // Create a structure of unique brands and their material-types - genericMaterialsModel.clear() - brandModel.clear(); - - var items = materialsModel.items; - var materialsByBrand = {}; - for (var i in items) { - var brandName = items[i]["metadata"]["brand"]; - var materialName = items[i]["metadata"]["material"]; - - if (brandName == "Generic") - { - // Add to top section - var materialId = items[i].id; - genericMaterialsModel.append({ - id: materialId, - name: items[i].name - }); - } - else - { - // Add to per-brand, per-material menu - if (!materialsByBrand.hasOwnProperty(brandName)) - { - materialsByBrand[brandName] = {}; - } - if (!materialsByBrand[brandName].hasOwnProperty(materialName)) - { - materialsByBrand[brandName][materialName] = []; - } - materialsByBrand[brandName][materialName].push({ - id: items[i].id, - name: items[i].name - }); - } - } - - for (var brand in materialsByBrand) - { - var materialsByBrandModel = []; - var materials = materialsByBrand[brand]; - for (var material in materials) - { - materialsByBrandModel.push({ - name: material, - colors: materials[material] - }) - } - brandModel.append({ - name: brand, - materials: materialsByBrandModel - }); - } - } } diff --git a/resources/qml/Menus/NozzleMenu.qml b/resources/qml/Menus/NozzleMenu.qml index 81db20a79d..43f3b79dd4 100644 --- a/resources/qml/Menus/NozzleMenu.qml +++ b/resources/qml/Menus/NozzleMenu.qml @@ -1,8 +1,8 @@ // Copyright (c) 2017 Ultimaker B.V. // Cura is released under the terms of the LGPLv3 or higher. -import QtQuick 2.2 -import QtQuick.Controls 1.1 +import QtQuick 2.7 +import QtQuick.Controls 1.4 import UM 1.2 as UM import Cura 1.0 as Cura @@ -13,89 +13,31 @@ Menu title: "Nozzle" property int extruderIndex: 0 - property bool printerConnected: Cura.MachineManager.printerOutputDevices.length != 0 - property bool isClusterPrinter: - { - if(Cura.MachineManager.printerOutputDevices.length == 0) - { - return false; - } - var clusterSize = Cura.MachineManager.printerOutputDevices[0].clusterSize; - // This is not a cluster printer or the cluster it is just one printer - if(clusterSize == undefined || clusterSize == 1) - { - return false; - } - return true; - } - MenuItem + Cura.NozzleModel { - id: automaticNozzle - text: - { - if(visible) - { - var nozzleName = Cura.MachineManager.printerOutputDevices[0].hotendIds[extruderIndex]; - return catalog.i18nc("@title:menuitem %1 is the nozzle currently loaded in the printer", "Automatic: %1").arg(nozzleName); - } - return ""; - } - visible: printerConnected && Cura.MachineManager.printerOutputDevices[0].hotendIds != undefined && Cura.MachineManager.printerOutputDevices[0].hotendIds.length > extruderIndex && !isClusterPrinter - onTriggered: - { - var activeExtruderIndex = Cura.ExtruderManager.activeExtruderIndex; - Cura.ExtruderManager.setActiveExtruderIndex(extruderIndex); - var hotendId = Cura.MachineManager.printerOutputDevices[0].hotendIds[extruderIndex]; - var itemIndex = nozzleInstantiator.model.find("name", hotendId); - if(itemIndex > -1) - { - Cura.MachineManager.setActiveVariant(nozzleInstantiator.model.getItem(itemIndex).id); - } - Cura.ExtruderManager.setActiveExtruderIndex(activeExtruderIndex); - } - } - - MenuSeparator - { - visible: automaticNozzle.visible + id: nozzleModel } Instantiator { - id: nozzleInstantiator - model: UM.InstanceContainersModel - { - filter: - { - var filter_dict = - { - "type": "variant", - "definition": Cura.MachineManager.activeQualityDefinitionId //Only show variants of this machine - } - if (Cura.MachineManager.hasVariantBuildplates) - { - filter_dict["hardware_type"] = "nozzle" - } + model: nozzleModel - return filter_dict - } - } - MenuItem { - text: model.name + MenuItem + { + text: model.hotend_name checkable: true - checked: model.id == Cura.MachineManager.allActiveVariantIds[Cura.ExtruderManager.extruderIds[extruderIndex]] + checked: { + return Cura.MachineManager.activeVariantNames[extruderIndex] == model.hotend_name + } exclusiveGroup: group - onTriggered: - { - var activeExtruderIndex = Cura.ExtruderManager.activeExtruderIndex; - Cura.ExtruderManager.setActiveExtruderIndex(extruderIndex); - Cura.MachineManager.setActiveVariant(model.id); - Cura.ExtruderManager.setActiveExtruderIndex(activeExtruderIndex); + onTriggered: { + Cura.MachineManager.setVariantGroup(menu.extruderIndex, model.container_node); } } - onObjectAdded: menu.insertItem(index, object) - onObjectRemoved: menu.removeItem(object) + + onObjectAdded: menu.insertItem(index, object); + onObjectRemoved: menu.removeItem(object); } ExclusiveGroup { id: group } diff --git a/resources/qml/Menus/ProfileMenu.qml b/resources/qml/Menus/ProfileMenu.qml index f543bb36eb..72cda13ca9 100644 --- a/resources/qml/Menus/ProfileMenu.qml +++ b/resources/qml/Menus/ProfileMenu.qml @@ -1,8 +1,8 @@ -// Copyright (c) 2016 Ultimaker B.V. +// Copyright (c) 2018 Ultimaker B.V. // Cura is released under the terms of the LGPLv3 or higher. -import QtQuick 2.2 -import QtQuick.Controls 1.1 +import QtQuick 2.7 +import QtQuick.Controls 1.4 import UM 1.2 as UM import Cura 1.0 as Cura @@ -13,15 +13,17 @@ Menu Instantiator { - model: Cura.ProfilesModel + model: Cura.QualityProfilesDropDownMenuModel MenuItem { - text: (model.layer_height != "") ? model.name + " - " + model.layer_height : model.name + text: (model.layer_height != "") ? model.name + " - " + model.layer_height + model.layer_height_unit : model.name checkable: true - checked: Cura.MachineManager.activeQualityId == model.id + checked: Cura.MachineManager.activeQualityOrQualityChangesName == model.name exclusiveGroup: group - onTriggered: Cura.MachineManager.setActiveQuality(model.id) + onTriggered: { + Cura.MachineManager.setQualityGroup(model.quality_group) + } visible: model.available } @@ -32,24 +34,27 @@ Menu MenuSeparator { id: customSeparator - visible: Cura.UserProfilesModel.rowCount > 0 + visible: Cura.CustomQualityProfilesDropDownMenuModel.rowCount > 0 } Instantiator { id: customProfileInstantiator - model: Cura.UserProfilesModel + model: Cura.CustomQualityProfilesDropDownMenuModel + + Connections { - onModelReset: customSeparator.visible = rowCount() > 0 + target: Cura.CustomQualityProfilesDropDownMenuModel + onModelReset: customSeparator.visible = Cura.CustomQualityProfilesDropDownMenuModel.rowCount() > 0 } MenuItem { text: model.name - checkable: true - checked: Cura.MachineManager.activeQualityChangesId == model.id + checkable: model.available + checked: Cura.MachineManager.activeQualityOrQualityChangesName == model.name exclusiveGroup: group - onTriggered: Cura.MachineManager.setActiveQuality(model.id) + onTriggered: Cura.MachineManager.setQualityChangesGroup(model.quality_changes_group) } onObjectAdded: @@ -73,23 +78,4 @@ Menu MenuItem { action: Cura.Actions.resetProfile } MenuSeparator { } MenuItem { action: Cura.Actions.manageProfiles } - - function getFilter(initial_conditions) - { - var result = initial_conditions; - - if(Cura.MachineManager.filterQualityByMachine) - { - result.definition = Cura.MachineManager.activeQualityDefinitionId; - if(Cura.MachineManager.hasMaterials) - { - result.material = Cura.MachineManager.activeQualityMaterialId; - } - } - else - { - result.definition = "fdmprinter" - } - return result - } } diff --git a/resources/qml/Menus/ViewMenu.qml b/resources/qml/Menus/ViewMenu.qml index afc80dd314..6bbb0b1e2e 100644 --- a/resources/qml/Menus/ViewMenu.qml +++ b/resources/qml/Menus/ViewMenu.qml @@ -5,7 +5,7 @@ import QtQuick 2.2 import QtQuick.Controls 1.1 import UM 1.2 as UM -import Cura 1.2 as Cura +import Cura 1.0 as Cura Menu { @@ -13,6 +13,8 @@ Menu id: base enabled: !PrintInformation.preSliced + property var multiBuildPlateModel: CuraApplication.getMultiBuildPlateModel() + // main views Instantiator { @@ -53,12 +55,12 @@ Menu visible: UM.Preferences.getValue("cura/use_multi_build_plate") Instantiator { - model: Cura.BuildPlateModel + model: base.multiBuildPlateModel MenuItem { - text: Cura.BuildPlateModel.getItem(index).name; - onTriggered: Cura.SceneController.setActiveBuildPlate(Cura.BuildPlateModel.getItem(index).buildPlateNumber); + text: base.multiBuildPlateModel.getItem(index).name; + onTriggered: Cura.SceneController.setActiveBuildPlate(base.multiBuildPlateModel.getItem(index).buildPlateNumber); checkable: true; - checked: Cura.BuildPlateModel.getItem(index).buildPlateNumber == Cura.BuildPlateModel.activeBuildPlate; + checked: base.multiBuildPlateModel.getItem(index).buildPlateNumber == base.multiBuildPlateModel.activeBuildPlate; exclusiveGroup: buildPlateGroup; visible: UM.Preferences.getValue("cura/use_multi_build_plate") } diff --git a/resources/qml/ObjectsList.qml b/resources/qml/ObjectsList.qml index b64f08d003..8c8eaa16ae 100644 --- a/resources/qml/ObjectsList.qml +++ b/resources/qml/ObjectsList.qml @@ -8,7 +8,7 @@ import QtQuick.Layouts 1.1 import QtQuick.Dialogs 1.1 import UM 1.3 as UM -import Cura 1.2 as Cura +import Cura 1.0 as Cura import "Menus" @@ -31,7 +31,9 @@ Rectangle border.width: UM.Theme.getSize("default_lining").width border.color: UM.Theme.getColor("lining") - property bool collapsed: true; + property bool collapsed: true + + property var multiBuildPlateModel: CuraApplication.getMultiBuildPlateModel() SystemPalette { id: palette } @@ -67,7 +69,7 @@ Rectangle Rectangle { height: childrenRect.height - color: Cura.BuildPlateModel.getItem(index).buildPlateNumber == Cura.BuildPlateModel.activeBuildPlate ? palette.highlight : index % 2 ? palette.base : palette.alternateBase + color: multiBuildPlateModel.getItem(index).buildPlateNumber == multiBuildPlateModel.activeBuildPlate ? palette.highlight : index % 2 ? palette.base : palette.alternateBase width: parent.width Label { @@ -75,8 +77,8 @@ Rectangle anchors.left: parent.left anchors.leftMargin: UM.Theme.getSize("default_margin").width width: parent.width - 2 * UM.Theme.getSize("default_margin").width - 30 - text: Cura.BuildPlateModel.getItem(index) ? Cura.BuildPlateModel.getItem(index).name : ""; - color: Cura.BuildPlateModel.activeBuildPlate == index ? palette.highlightedText : palette.text + text: multiBuildPlateModel.getItem(index) ? multiBuildPlateModel.getItem(index).name : ""; + color: multiBuildPlateModel.activeBuildPlate == index ? palette.highlightedText : palette.text elide: Text.ElideRight } @@ -118,13 +120,12 @@ Rectangle ListView { id: buildPlateListView - model: Cura.BuildPlateModel + model: multiBuildPlateModel width: parent.width delegate: buildPlateDelegate } } - Component { id: objectDelegate Rectangle @@ -200,7 +201,6 @@ Rectangle } } - CheckBox { id: filterBuildPlateCheckbox @@ -260,6 +260,4 @@ Rectangle } action: Cura.Actions.arrangeAll; } - - } diff --git a/resources/qml/Preferences/GeneralPage.qml b/resources/qml/Preferences/GeneralPage.qml index 4c964540f0..1c7b2bcf7c 100644 --- a/resources/qml/Preferences/GeneralPage.qml +++ b/resources/qml/Preferences/GeneralPage.qml @@ -163,7 +163,7 @@ UM.PreferencesPage append({ text: "Русский", code: "ru_RU" }) append({ text: "Türkçe", code: "tr_TR" }) append({ text: "简体中文", code: "zh_CN" }) - //Traditional Chinese is disabled for being incomplete: append({ text: "正體字", code: "zh_TW" }) + append({ text: "正體字", code: "zh_TW" }) var date_object = new Date(); if (date_object.getUTCMonth() == 8 && date_object.getUTCDate() == 19) //Only add Pirate on the 19th of September. diff --git a/resources/qml/Preferences/MachinesPage.qml b/resources/qml/Preferences/MachinesPage.qml index 889dfa8d5b..62e5ef98b4 100644 --- a/resources/qml/Preferences/MachinesPage.qml +++ b/resources/qml/Preferences/MachinesPage.qml @@ -1,13 +1,14 @@ // Copyright (c) 2016 Ultimaker B.V. // Cura is released under the terms of the LGPLv3 or higher. -import QtQuick 2.1 -import QtQuick.Controls 1.1 +import QtQuick 2.7 +import QtQuick.Controls 1.4 import QtQuick.Window 2.1 import UM 1.2 as UM import Cura 1.0 as Cura + UM.ManagementPage { id: base; diff --git a/resources/qml/Preferences/MaterialView.qml b/resources/qml/Preferences/MaterialView.qml index 5fdc8a24eb..c987880305 100644 --- a/resources/qml/Preferences/MaterialView.qml +++ b/resources/qml/Preferences/MaterialView.qml @@ -1,8 +1,8 @@ // Copyright (c) 2017 Ultimaker B.V. // Cura is released under the terms of the LGPLv3 or higher. -import QtQuick 2.1 -import QtQuick.Controls 1.3 +import QtQuick 2.7 +import QtQuick.Controls 1.4 import QtQuick.Dialogs 1.2 import UM 1.2 as UM @@ -12,7 +12,10 @@ TabView { id: base - property QtObject properties; + property QtObject materialManager: CuraApplication.getMaterialManager() + + property QtObject properties + property var currentMaterialNode: null property bool editingEnabled: false; property string currency: UM.Preferences.getValue("cura/currency") ? UM.Preferences.getValue("cura/currency") : "€" @@ -27,18 +30,23 @@ TabView property bool reevaluateLinkedMaterials: false property string linkedMaterialNames: { - if (reevaluateLinkedMaterials) - { + if (reevaluateLinkedMaterials) { reevaluateLinkedMaterials = false; } - if(!base.containerId || !base.editingEnabled) - { + if (!base.containerId || !base.editingEnabled) { + return "" + } + var linkedMaterials = Cura.ContainerManager.getLinkedMaterials(base.currentMaterialNode); + if (linkedMaterials.length <= 1) { return "" } - var linkedMaterials = Cura.ContainerManager.getLinkedMaterials(base.containerId); return linkedMaterials.join(", "); } + function getApproximateDiameter(diameter) { + return Math.round(diameter); + } + Tab { title: catalog.i18nc("@title", "Information") @@ -65,6 +73,34 @@ TabView width: base.width property real rowHeight: textField.height + UM.Theme.getSize("default_lining").height + MessageDialog + { + id: confirmDiameterChangeDialog + + icon: StandardIcon.Question; + title: catalog.i18nc("@title:window", "Confirm Diameter Change") + text: catalog.i18nc("@label (%1 is object name)", "The new material diameter is set to %1 mm, which is not compatible to the current machine. Do you wish to continue?".arg(new_diameter_value)) + standardButtons: StandardButton.Yes | StandardButton.No + modality: Qt.ApplicationModal + + property var new_diameter_value: null; + property var old_diameter_value: null; + property var old_approximate_diameter_value: null; + + onYes: + { + Cura.ContainerManager.setContainerProperty(base.containerId, "material_diameter", "value", new_diameter_value); + base.setMetaDataEntry("approximate_diameter", old_approximate_diameter_value, getApproximateDiameter(new_diameter_value).toString()); + base.setMetaDataEntry("properties/diameter", properties.diameter, new_diameter_value); + } + + onNo: + { + properties.diameter = old_diameter_value; + diameterSpinBox.value = properties.diameter; + } + } + Label { width: scrollView.columnWidth; height: parent.rowHeight; verticalAlignment: Qt.AlignVCenter; text: catalog.i18nc("@label", "Display Name") } ReadOnlyTextField { @@ -80,18 +116,18 @@ TabView { id: textField; width: scrollView.columnWidth; - text: properties.supplier; + text: properties.brand; readOnly: !base.editingEnabled; - onEditingFinished: base.updateMaterialSupplier(properties.supplier, text) + onEditingFinished: base.updateMaterialBrand(properties.brand, text) } Label { width: scrollView.columnWidth; height: parent.rowHeight; verticalAlignment: Qt.AlignVCenter; text: catalog.i18nc("@label", "Material Type") } ReadOnlyTextField { width: scrollView.columnWidth; - text: properties.material_type; + text: properties.material; readOnly: !base.editingEnabled; - onEditingFinished: base.updateMaterialType(properties.material_type, text) + onEditingFinished: base.updateMaterialType(properties.material, text) } Label { width: scrollView.columnWidth; height: parent.rowHeight; verticalAlignment: Qt.AlignVCenter; text: catalog.i18nc("@label", "Color") } @@ -172,14 +208,20 @@ TabView // which derive from the same base_file var old_diameter = Cura.ContainerManager.getContainerProperty(base.containerId, "material_diameter", "value").toString(); var old_approximate_diameter = Cura.ContainerManager.getContainerMetaDataEntry(base.containerId, "approximate_diameter"); - base.setMetaDataEntry("approximate_diameter", old_approximate_diameter, Math.round(value).toString()); - base.setMetaDataEntry("properties/diameter", properties.diameter, value); - var new_approximate_diameter = Cura.ContainerManager.getContainerMetaDataEntry(base.containerId, "approximate_diameter"); - if (Cura.MachineManager.filterMaterialsByMachine && new_approximate_diameter != Cura.MachineManager.activeMachine.approximateMaterialDiameter) + var new_approximate_diameter = getApproximateDiameter(value); + if (Cura.MachineManager.filterMaterialsByMachine && new_approximate_diameter != Cura.ExtruderManager.getActiveExtruderStack().approximateMaterialDiameter) { - Cura.MaterialManager.showMaterialWarningMessage(base.containerId, old_diameter); + confirmDiameterChangeDialog.old_diameter_value = old_diameter; + confirmDiameterChangeDialog.new_diameter_value = value; + confirmDiameterChangeDialog.old_approximate_diameter_value = old_approximate_diameter; + + confirmDiameterChangeDialog.open() + } + else { + Cura.ContainerManager.setContainerProperty(base.containerId, "material_diameter", "value", value); + base.setMetaDataEntry("approximate_diameter", old_approximate_diameter, getApproximateDiameter(value).toString()); + base.setMetaDataEntry("properties/diameter", properties.diameter, value); } - Cura.ContainerManager.setContainerProperty(base.containerId, "material_diameter", "value", value); } onValueChanged: updateCostPerMeter() } @@ -251,7 +293,7 @@ TabView visible: base.linkedMaterialNames != "" onClicked: { - Cura.ContainerManager.unlinkMaterial(base.containerId) + Cura.ContainerManager.unlinkMaterial(base.currentMaterialNode) base.reevaluateLinkedMaterials = true } } @@ -357,8 +399,20 @@ TabView onEditingFinished: materialPropertyProvider.setPropertyValue("value", value) } - UM.ContainerPropertyProvider { id: materialPropertyProvider; containerId: base.containerId; watchedProperties: [ "value" ]; key: model.key } - UM.ContainerPropertyProvider { id: machinePropertyProvider; containerId: Cura.MachineManager.activeDefinitionId; watchedProperties: [ "value" ]; key: model.key } + UM.ContainerPropertyProvider + { + id: materialPropertyProvider + containerId: base.containerId + watchedProperties: [ "value" ] + key: model.key + } + UM.ContainerPropertyProvider + { + id: machinePropertyProvider + containerId: Cura.MachineManager.activeDefinitionId + watchedProperties: [ "value" ] + key: model.key + } } } } @@ -405,7 +459,7 @@ TabView // Tiny convenience function to check if a value really changed before trying to set it. function setMetaDataEntry(entry_name, old_value, new_value) { if (old_value != new_value) { - Cura.ContainerManager.setContainerMetaDataEntry(base.containerId, entry_name, new_value) + Cura.ContainerManager.setContainerMetaDataEntry(base.currentMaterialNode, entry_name, new_value) // make sure the UI properties are updated as well since we don't re-fetch the entire model here // When the entry_name is something like properties/diameter, we take the last part of the entry_name var list = entry_name.split("/") @@ -442,26 +496,25 @@ TabView // update the display name of the material function updateMaterialDisplayName (old_name, new_name) { - // don't change when new name is the same if (old_name == new_name) { return } // update the values - Cura.ContainerManager.setContainerName(base.containerId, new_name) + base.materialManager.setMaterialName(base.currentMaterialNode, new_name) materialProperties.name = new_name } // update the type of the material function updateMaterialType (old_type, new_type) { base.setMetaDataEntry("material", old_type, new_type) - materialProperties.material_type = new_type + materialProperties.material= new_type } - // update the supplier of the material - function updateMaterialSupplier (old_supplier, new_supplier) { - base.setMetaDataEntry("brand", old_supplier, new_supplier) - materialProperties.supplier = new_supplier + // update the brand of the material + function updateMaterialBrand (old_brand, new_brand) { + base.setMetaDataEntry("brand", old_brand, new_brand) + materialProperties.brand = new_brand } } diff --git a/resources/qml/Preferences/MaterialsPage.qml b/resources/qml/Preferences/MaterialsPage.qml index 22814683ad..4a6d07df81 100644 --- a/resources/qml/Preferences/MaterialsPage.qml +++ b/resources/qml/Preferences/MaterialsPage.qml @@ -1,412 +1,526 @@ -//Copyright (c) 2017 Ultimaker B.V. -//Cura is released under the terms of the LGPLv3 or higher. +// Copyright (c) 2018 Ultimaker B.V. +// Uranium is released under the terms of the LGPLv3 or higher. -import QtQuick 2.1 -import QtQuick.Controls 1.1 +import QtQuick 2.7 +import QtQuick.Controls 1.4 +import QtQuick.Layouts 1.3 import QtQuick.Dialogs 1.2 import UM 1.2 as UM import Cura 1.0 as Cura -UM.ManagementPage + +Item { - id: base; + id: base - title: catalog.i18nc("@title:tab", "Materials"); + property QtObject materialManager: CuraApplication.getMaterialManager() + property var resetEnabled: false // Keep PreferencesDialog happy - Component.onCompleted: - { - // Workaround to make sure all of the items are visible - objectList.positionViewAtBeginning(); + UM.I18nCatalog { id: catalog; name: "cura"; } + + Cura.MaterialManagementModel { + id: materialsModel } - model: Cura.MaterialsModel - { - filter: - { - var result = { "type": "material", "approximate_diameter": Math.round(materialDiameterProvider.properties.value).toString() } - if(Cura.MachineManager.filterMaterialsByMachine) - { - result.definition = Cura.MachineManager.activeQualityDefinitionId; - if(Cura.MachineManager.hasVariants) - { - result.variant = Cura.MachineManager.activeQualityVariantId; - } - } - else - { - result.definition = "fdmprinter"; - result.compatible = true; //NB: Only checks for compatibility in global version of material, but we don't have machine-specific materials anyway. - } - return result + Label { + id: titleLabel + + anchors { + top: parent.top + left: parent.left + right: parent.right + margins: 5 * screenScaleFactor } - sectionProperty: "brand" + font.pointSize: 18 + text: catalog.i18nc("@title:tab", "Materials") } - delegate: Rectangle - { - width: objectList.width; - height: childrenRect.height; - color: isCurrentItem ? palette.highlight : index % 2 ? palette.base : palette.alternateBase - property bool isCurrentItem: ListView.isCurrentItem + property var hasCurrentItem: materialListView.currentItem != null - Row + property var currentItem: + { // is soon to be overwritten + var current_index = materialListView.currentIndex; + return materialsModel.getItem(current_index); + } + + property var isCurrentItemActivated: + { + const extruder_position = Cura.ExtruderManager.activeExtruderIndex; + const root_material_id = Cura.MachineManager.currentRootMaterialId[extruder_position]; + return base.currentItem.root_material_id == root_material_id; + } + + Row // Button Row + { + id: buttonRow + anchors { - spacing: (UM.Theme.getSize("default_margin").width / 2) | 0 - anchors.left: parent.left - anchors.leftMargin: UM.Theme.getSize("default_margin").width - anchors.right: parent.right - Rectangle + left: parent.left + right: parent.right + top: titleLabel.bottom + } + height: childrenRect.height + + // Activate button + Button + { + text: catalog.i18nc("@action:button", "Activate") + iconName: "list-activate" + enabled: !isCurrentItemActivated + onClicked: { - width: Math.round(parent.height * 0.8) - height: Math.round(parent.height * 0.8) - color: model.metadata.color_code - border.color: isCurrentItem ? palette.highlightedText : palette.text; - anchors.verticalCenter: parent.verticalCenter - } - Label - { - width: Math.round((parent.width * 0.3)) - text: model.metadata.material - elide: Text.ElideRight - font.italic: model.id == activeId - color: isCurrentItem ? palette.highlightedText : palette.text; - } - Label - { - text: (model.name != model.metadata.material) ? model.name : "" - elide: Text.ElideRight - font.italic: model.id == activeId - color: isCurrentItem ? palette.highlightedText : palette.text; + forceActiveFocus() + + const extruder_position = Cura.ExtruderManager.activeExtruderIndex; + Cura.MachineManager.setMaterial(extruder_position, base.currentItem.container_node); } } - MouseArea + // Create button + Button { - anchors.fill: parent; + text: catalog.i18nc("@action:button", "Create") + iconName: "list-add" onClicked: { forceActiveFocus(); - if(!parent.ListView.isCurrentItem) - { - parent.ListView.view.currentIndex = index; - base.itemActivated(); - } + base.newRootMaterialIdToSwitchTo = base.materialManager.createMaterial(); + base.toActivateNewMaterial = true; } } - } - - activeId: Cura.MachineManager.activeMaterialId - activeIndex: getIndexById(activeId) - function getIndexById(material_id) - { - for(var i = 0; i < model.rowCount(); i++) { - if (model.getItem(i).id == material_id) { - return i; - } - } - return -1; - } - - scrollviewCaption: - { - var caption = catalog.i18nc("@action:label", "Printer") + ": " + Cura.MachineManager.activeMachineName; - if (Cura.MachineManager.hasVariants) - { - caption += ", " + Cura.MachineManager.activeDefinitionVariantsName + ": " + Cura.MachineManager.activeVariantName; - } - return caption; - } - detailsVisible: true - - section.property: "section" - section.delegate: Label - { - text: section - font.bold: true - anchors.left: parent.left; - anchors.leftMargin: UM.Theme.getSize("default_lining").width; - } - - buttons: [ - - // Activate button - Button { - text: catalog.i18nc("@action:button", "Activate") - iconName: "list-activate"; - enabled: base.currentItem != null && base.currentItem.id != Cura.MachineManager.activeMaterialId && Cura.MachineManager.hasMaterials - onClicked: { - forceActiveFocus() - Cura.MachineManager.setActiveMaterial(base.currentItem.id) - currentItem = base.model.getItem(base.objectList.currentIndex) // Refresh the current item. - } - }, - - // Create button - Button { - text: catalog.i18nc("@action:button", "Create") - iconName: "list-add" - onClicked: { - forceActiveFocus() - Cura.ContainerManager.createMaterial() - } - }, // Duplicate button - Button { + Button + { text: catalog.i18nc("@action:button", "Duplicate"); - iconName: "list-add"; - enabled: base.currentItem != null - onClicked: { - forceActiveFocus() - Cura.ContainerManager.duplicateOriginalMaterial(base.currentItem.id) + iconName: "list-add" + enabled: base.hasCurrentItem + onClicked: + { + forceActiveFocus(); + base.newRootMaterialIdToSwitchTo = base.materialManager.duplicateMaterial(base.currentItem.container_node); + base.toActivateNewMaterial = true; } - }, + } // Remove button - Button { + Button + { text: catalog.i18nc("@action:button", "Remove") iconName: "list-remove" - enabled: base.currentItem != null && !base.currentItem.readOnly && !Cura.ContainerManager.isContainerUsed(base.currentItem.id) - onClicked: { - forceActiveFocus() - confirmDialog.open() + enabled: base.hasCurrentItem && !base.currentItem.is_read_only && !base.isCurrentItemActivated + onClicked: + { + forceActiveFocus(); + confirmRemoveMaterialDialog.open(); } - }, + } // Import button - Button { + Button + { text: catalog.i18nc("@action:button", "Import") iconName: "document-import" - onClicked: { - forceActiveFocus() - importDialog.open() + onClicked: + { + forceActiveFocus(); + importMaterialDialog.open(); } visible: true - }, + } // Export button - Button { + Button + { text: catalog.i18nc("@action:button", "Export") iconName: "document-export" - onClicked: { - forceActiveFocus() - exportDialog.open() + onClicked: + { + forceActiveFocus(); + exportMaterialDialog.open(); } enabled: currentItem != null } + } + + property string newRootMaterialIdToSwitchTo: "" + property bool toActivateNewMaterial: false + + // This connection makes sure that we will switch to the new + Connections + { + target: materialsModel + onItemsChanged: { + var currentItemId = base.currentItem == null ? "" : base.currentItem.root_material_id; + var position = Cura.ExtruderManager.activeExtruderIndex; + + // try to pick the currently selected item; it may have been moved + if (base.newRootMaterialIdToSwitchTo == "") { + base.newRootMaterialIdToSwitchTo = currentItemId; + } + + for (var idx = 0; idx < materialsModel.rowCount(); ++idx) { + var item = materialsModel.getItem(idx); + if (item.root_material_id == base.newRootMaterialIdToSwitchTo) { + // Switch to the newly created profile if needed + materialListView.currentIndex = idx; + materialListView.activateDetailsWithIndex(materialListView.currentIndex); + if (base.toActivateNewMaterial) { + Cura.MachineManager.setMaterial(position, item.container_node); + } + base.newRootMaterialIdToSwitchTo = ""; + base.toActivateNewMaterial = false; + return + } + } + + materialListView.currentIndex = 0; + materialListView.activateDetailsWithIndex(materialListView.currentIndex); + if (base.toActivateNewMaterial) { + Cura.MachineManager.setMaterial(position, materialsModel.getItem(0).container_node); + } + base.newRootMaterialIdToSwitchTo = ""; + base.toActivateNewMaterial = false; + } + } + + MessageDialog + { + id: confirmRemoveMaterialDialog + + icon: StandardIcon.Question; + title: catalog.i18nc("@title:window", "Confirm Remove") + text: catalog.i18nc("@label (%1 is object name)", "Are you sure you wish to remove %1? This cannot be undone!").arg(base.currentItem.name) + standardButtons: StandardButton.Yes | StandardButton.No + modality: Qt.ApplicationModal + + onYes: + { + base.materialManager.removeMaterial(base.currentItem.container_node); + } + } + + FileDialog + { + id: importMaterialDialog + title: catalog.i18nc("@title:window", "Import Material") + selectExisting: true + nameFilters: Cura.ContainerManager.getContainerNameFilters("material") + folder: CuraApplication.getDefaultPath("dialog_material_path") + onAccepted: + { + var result = Cura.ContainerManager.importMaterialContainer(fileUrl); + + messageDialog.title = catalog.i18nc("@title:window", "Import Material"); + messageDialog.text = catalog.i18nc("@info:status Don't translate the XML tags or !", "Could not import material %1: %2").arg(fileUrl).arg(result.message); + if (result.status == "success") { + messageDialog.icon = StandardIcon.Information; + messageDialog.text = catalog.i18nc("@info:status Don't translate the XML tag !", "Successfully imported material %1").arg(fileUrl); + } + else if (result.status == "duplicate") { + messageDialog.icon = StandardIcon.Warning; + } + else { + messageDialog.icon = StandardIcon.Critical; + } + messageDialog.open(); + CuraApplication.setDefaultPath("dialog_material_path", folder); + } + } + + FileDialog + { + id: exportMaterialDialog + title: catalog.i18nc("@title:window", "Export Material") + selectExisting: false + nameFilters: Cura.ContainerManager.getContainerNameFilters("material") + folder: CuraApplication.getDefaultPath("dialog_material_path") + onAccepted: + { + var result = Cura.ContainerManager.exportContainer(base.currentItem.root_material_id, selectedNameFilter, fileUrl); + + messageDialog.title = catalog.i18nc("@title:window", "Export Material"); + if (result.status == "error") { + messageDialog.icon = StandardIcon.Critical; + messageDialog.text = catalog.i18nc("@info:status Don't translate the XML tags and !", "Failed to export material to %1: %2").arg(fileUrl).arg(result.message); + messageDialog.open(); + } + else if (result.status == "success") { + messageDialog.icon = StandardIcon.Information; + messageDialog.text = catalog.i18nc("@info:status Don't translate the XML tag !", "Successfully exported material to %1").arg(result.path); + messageDialog.open(); + } + CuraApplication.setDefaultPath("dialog_material_path", folder); + } + } + + MessageDialog + { + id: messageDialog + } - ] Item { - visible: base.currentItem != null - anchors.fill: parent + id: contentsItem + + anchors { + top: titleLabel.bottom + left: parent.left + right: parent.right + bottom: parent.bottom + margins: 5 * screenScaleFactor + bottomMargin: 0 + } + + clip: true + } + + Item + { + anchors { + top: buttonRow.bottom + topMargin: UM.Theme.getSize("default_margin").height + left: parent.left + right: parent.right + bottom: parent.bottom + } + + SystemPalette { id: palette } + + Label + { + id: captionLabel + anchors { + top: parent.top + left: parent.left + } + visible: text != "" + text: { + var caption = catalog.i18nc("@action:label", "Printer") + ": " + Cura.MachineManager.activeMachineName; + if (Cura.MachineManager.hasVariants) + { + caption += ", " + Cura.MachineManager.activeDefinitionVariantsName + ": " + Cura.MachineManager.activeVariantName; + } + return caption; + } + width: materialScrollView.width + elide: Text.ElideRight + } + + ScrollView + { + id: materialScrollView + anchors { + top: captionLabel.visible ? captionLabel.bottom : parent.top + topMargin: captionLabel.visible ? UM.Theme.getSize("default_margin").height : 0 + bottom: parent.bottom + left: parent.left + } + + Rectangle { + parent: viewport + anchors.fill: parent + color: palette.light + } + + width: true ? (parent.width * 0.4) | 0 : parent.width + + ListView + { + id: materialListView + + model: materialsModel + + section.property: "brand" + section.criteria: ViewSection.FullString + section.delegate: Rectangle + { + width: materialScrollView.width + height: childrenRect.height + color: palette.light + + Label + { + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_lining").width + text: section + font.bold: true + color: palette.text + } + } + + delegate: Rectangle + { + width: materialScrollView.width + height: childrenRect.height + color: ListView.isCurrentItem ? palette.highlight : (model.index % 2) ? palette.base : palette.alternateBase + + Row + { + id: materialRow + spacing: (UM.Theme.getSize("default_margin").width / 2) | 0 + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.right: parent.right + + property bool isItemActivated: + { + const extruder_position = Cura.ExtruderManager.activeExtruderIndex; + const root_material_id = Cura.MachineManager.currentRootMaterialId[extruder_position]; + return model.root_material_id == root_material_id; + } + + Rectangle + { + width: Math.floor(parent.height * 0.8) + height: Math.floor(parent.height * 0.8) + color: model.color_code + border.color: parent.ListView.isCurrentItem ? palette.highlightedText : palette.text; + anchors.verticalCenter: parent.verticalCenter + } + Label + { + width: Math.floor((parent.width * 0.3)) + text: model.material + elide: Text.ElideRight + font.italic: materialRow.isItemActivated + color: parent.ListView.isCurrentItem ? palette.highlightedText : palette.text; + } + Label + { + text: (model.name != model.material) ? model.name : "" + elide: Text.ElideRight + font.italic: materialRow.isItemActivated + color: parent.ListView.isCurrentItem ? palette.highlightedText : palette.text; + } + } + + MouseArea + { + anchors.fill: parent + onClicked: { + parent.ListView.view.currentIndex = model.index; + } + } + } + + function activateDetailsWithIndex(index) { + var model = materialsModel.getItem(index); + base.currentItem = model; + materialDetailsView.containerId = model.container_id; + materialDetailsView.currentMaterialNode = model.container_node; + + detailsPanel.updateMaterialPropertiesObject(); + } + + onCurrentIndexChanged: + { + forceActiveFocus(); // causes the changed fields to be saved + activateDetailsWithIndex(currentIndex); + } + } + } + Item { - id: profileName + id: detailsPanel - width: parent.width; - height: childrenRect.height - - Label { text: materialProperties.name; font: UM.Theme.getFont("large"); } - } - - MaterialView - { - anchors - { - left: parent.left - right: parent.right - top: profileName.bottom - topMargin: UM.Theme.getSize("default_margin").height + anchors { + left: materialScrollView.right + leftMargin: UM.Theme.getSize("default_margin").width + top: parent.top bottom: parent.bottom + right: parent.right } - editingEnabled: base.currentItem != null && !base.currentItem.readOnly - - properties: materialProperties - containerId: base.currentItem != null ? base.currentItem.id : "" - - property alias pane: base - } - - QtObject - { - id: materialProperties - - property string guid: "00000000-0000-0000-0000-000000000000" - property string name: "Unknown"; - property string profile_type: "Unknown"; - property string supplier: "Unknown"; - property string material_type: "Unknown"; - - property string color_name: "Yellow"; - property color color_code: "yellow"; - - property real density: 0.0; - property real diameter: 0.0; - property string approximate_diameter: "0"; - - property real spool_cost: 0.0; - property real spool_weight: 0.0; - property real spool_length: 0.0; - property real cost_per_meter: 0.0; - - property string description: ""; - property string adhesion_info: ""; - } - - UM.ConfirmRemoveDialog - { - id: confirmDialog - object: base.currentItem != null ? base.currentItem.name : "" - onYes: + function updateMaterialPropertiesObject() { - // A material container can actually be multiple items, so we need to find (and remove) all of them. - var base_file = Cura.ContainerManager.getContainerMetaDataEntry(base.currentItem.id, "base_file") - if(base_file == "") - { - base_file = base.currentItem.id - } - var guid = Cura.ContainerManager.getContainerMetaDataEntry(base.currentItem.id, "GUID") - // remove base container first, it otherwise triggers loading the base file while removing other containers - var base_containers = Cura.ContainerManager.findInstanceContainers({"GUID": guid, "id": base_file, "base_file": base_file, "type": "material"}) - for(var i in base_containers) - { - Cura.ContainerManager.removeContainer(base_containers[i]); - } - var containers = Cura.ContainerManager.findInstanceContainers({"GUID": guid, "base_file": base_file, "type": "material"}) - for(var i in containers) - { - Cura.ContainerManager.removeContainer(containers[i]); - } - if(base.objectList.currentIndex > 0) - { - base.objectList.currentIndex--; - } - currentItem = base.model.getItem(base.objectList.currentIndex) // Refresh the current item. - } - } + var currentItem = materialsModel.getItem(materialListView.currentIndex); - FileDialog - { - id: importDialog; - title: catalog.i18nc("@title:window", "Import Material"); - selectExisting: true; - nameFilters: Cura.ContainerManager.getContainerNameFilters("material") - folder: CuraApplication.getDefaultPath("dialog_material_path") - onAccepted: + materialProperties.name = currentItem.name; + materialProperties.guid = currentItem.guid; + + materialProperties.brand = currentItem.brand ? currentItem.brand : "Unknown"; + materialProperties.material = currentItem.material ? currentItem.material : "Unknown"; + materialProperties.color_name = currentItem.color_name ? currentItem.color_name : "Yellow"; + materialProperties.color_code = currentItem.color_code ? currentItem.color_code : "yellow"; + + materialProperties.description = currentItem.description ? currentItem.description : ""; + materialProperties.adhesion_info = currentItem.adhesion_info ? currentItem.adhesion_info : ""; + + materialProperties.density = currentItem.density ? currentItem.density : 0.0; + materialProperties.diameter = currentItem.diameter ? currentItem.diameter : 0.0; + materialProperties.approximate_diameter = currentItem.approximate_diameter ? currentItem.approximate_diameter : "0"; + } + + Item { - var result = Cura.ContainerManager.importMaterialContainer(fileUrl) + anchors.fill: parent - messageDialog.title = catalog.i18nc("@title:window", "Import Material") - messageDialog.text = catalog.i18nc("@info:status Don't translate the XML tags or !", "Could not import material %1: %2").arg(fileUrl).arg(result.message) - if(result.status == "success") + Item // Material title Label { - messageDialog.icon = StandardIcon.Information - messageDialog.text = catalog.i18nc("@info:status Don't translate the XML tag !", "Successfully imported material %1").arg(fileUrl) + id: profileName + + width: parent.width + height: childrenRect.height + + Label { + text: materialProperties.name + font: UM.Theme.getFont("large") + } } - else if(result.status == "duplicate") + + MaterialView // Material detailed information view below the title Label { - messageDialog.icon = StandardIcon.Warning + id: materialDetailsView + anchors + { + left: parent.left + right: parent.right + top: profileName.bottom + topMargin: UM.Theme.getSize("default_margin").height + bottom: parent.bottom + } + + editingEnabled: base.currentItem != null && !base.currentItem.is_read_only + + properties: materialProperties + containerId: base.currentItem != null ? base.currentItem.container_id : "" + currentMaterialNode: base.currentItem.container_node + + property alias pane: base } - else + + QtObject { - messageDialog.icon = StandardIcon.Critical + id: materialProperties + + property string guid: "00000000-0000-0000-0000-000000000000" + property string name: "Unknown"; + property string profile_type: "Unknown"; + property string brand: "Unknown"; + property string material: "Unknown"; // This needs to be named as "material" to be consistent with + // the material container's metadata entry + + property string color_name: "Yellow"; + property color color_code: "yellow"; + + property real density: 0.0; + property real diameter: 0.0; + property string approximate_diameter: "0"; + + property real spool_cost: 0.0; + property real spool_weight: 0.0; + property real spool_length: 0.0; + property real cost_per_meter: 0.0; + + property string description: ""; + property string adhesion_info: ""; } - messageDialog.open() - CuraApplication.setDefaultPath("dialog_material_path", folder) } } - - FileDialog - { - id: exportDialog; - title: catalog.i18nc("@title:window", "Export Material"); - selectExisting: false; - nameFilters: Cura.ContainerManager.getContainerNameFilters("material") - folder: CuraApplication.getDefaultPath("dialog_material_path") - onAccepted: - { - if(base.currentItem.metadata.base_file) - { - var result = Cura.ContainerManager.exportContainer(base.currentItem.metadata.base_file, selectedNameFilter, fileUrl) - } - else - { - var result = Cura.ContainerManager.exportContainer(base.currentItem.id, selectedNameFilter, fileUrl) - } - - messageDialog.title = catalog.i18nc("@title:window", "Export Material") - if(result.status == "error") - { - messageDialog.icon = StandardIcon.Critical - messageDialog.text = catalog.i18nc("@info:status Don't translate the XML tags and !", "Failed to export material to %1: %2").arg(fileUrl).arg(result.message) - messageDialog.open() - } - else if(result.status == "success") - { - messageDialog.icon = StandardIcon.Information - messageDialog.text = catalog.i18nc("@info:status Don't translate the XML tag !", "Successfully exported material to %1").arg(result.path) - messageDialog.open() - } - CuraApplication.setDefaultPath("dialog_material_path", folder) - } - } - - MessageDialog - { - id: messageDialog - } - - UM.SettingPropertyProvider - { - id: materialDiameterProvider - - containerStackId: Cura.ExtruderManager.activeExtruderStackId - key: "material_diameter" - watchedProperties: [ "value" ] - storeIndex: 5 - } - - UM.I18nCatalog { id: catalog; name: "cura"; } - SystemPalette { id: palette } - } - - onCurrentItemChanged: - { - if(currentItem == null) - { - return - } - materialProperties.name = currentItem.name; - materialProperties.guid = Cura.ContainerManager.getContainerMetaDataEntry(base.currentItem.id, "GUID"); - - if(currentItem.metadata != undefined && currentItem.metadata != null) - { - materialProperties.supplier = currentItem.metadata.brand ? currentItem.metadata.brand : "Unknown"; - materialProperties.material_type = currentItem.metadata.material ? currentItem.metadata.material : "Unknown"; - materialProperties.color_name = currentItem.metadata.color_name ? currentItem.metadata.color_name : "Yellow"; - materialProperties.color_code = currentItem.metadata.color_code ? currentItem.metadata.color_code : "yellow"; - - materialProperties.description = currentItem.metadata.description ? currentItem.metadata.description : ""; - materialProperties.adhesion_info = currentItem.metadata.adhesion_info ? currentItem.metadata.adhesion_info : ""; - - if(currentItem.metadata.properties != undefined && currentItem.metadata.properties != null) - { - materialProperties.density = currentItem.metadata.properties.density ? currentItem.metadata.properties.density : 0.0; - materialProperties.diameter = currentItem.metadata.properties.diameter ? currentItem.metadata.properties.diameter : 0.0; - materialProperties.approximate_diameter = currentItem.metadata.approximate_diameter ? currentItem.metadata.approximate_diameter : "0"; - } - else - { - materialProperties.density = 0.0; - materialProperties.diameter = 0.0; - materialProperties.approximate_diameter = "0"; - } - - } } } diff --git a/resources/qml/Preferences/ProfileTab.qml b/resources/qml/Preferences/ProfileTab.qml index acebea3500..40f725e092 100644 --- a/resources/qml/Preferences/ProfileTab.qml +++ b/resources/qml/Preferences/ProfileTab.qml @@ -1,8 +1,8 @@ -// Copyright (c) 2016 Ultimaker B.V. +// Copyright (c) 2018 Ultimaker B.V. // Cura is released under the terms of the LGPLv3 or higher. -import QtQuick 2.1 -import QtQuick.Controls 1.1 +import QtQuick 2.7 +import QtQuick.Controls 1.4 import UM 1.2 as UM import Cura 1.0 as Cura @@ -11,10 +11,8 @@ Tab { id: base - property string extruderId: ""; - property string extruderDefinition: ""; - property string quality: ""; - property string material: ""; + property string extruderPosition: "" + property var qualityItem: null TableView { @@ -38,8 +36,8 @@ Tab anchors.leftMargin: UM.Theme.getSize("default_margin").width anchors.right: parent.right text: (styleData.value.substr(0,1) == "=") ? catalog.i18nc("@info:status", "Calculated") : styleData.value - font.strikeout: styleData.column == 1 && quality == Cura.MachineManager.globalQualityId && setting.user_value != "" - font.italic: setting.profile_value_source == "quality_changes" || (quality == Cura.MachineManager.globalQualityId && setting.user_value != "") + font.strikeout: styleData.column == 1 && setting.user_value != "" && qualityItem.name == Cura.MachineManager.activeQualityOrQualityChangesName + font.italic: setting.profile_value_source == "quality_changes" || (setting.user_value != "" && qualityItem.name == Cura.MachineManager.activeQualityOrQualityChangesName) opacity: font.strikeout ? 0.5 : 1 color: styleData.textColor elide: Text.ElideRight @@ -65,7 +63,7 @@ Tab { role: "user_value" title: catalog.i18nc("@title:column", "Current"); - visible: quality == Cura.MachineManager.globalQualityId + visible: qualityItem.name == Cura.MachineManager.activeQualityOrQualityChangesName width: (parent.width * 0.18) | 0 delegate: itemDelegate } @@ -87,10 +85,8 @@ Tab model: Cura.QualitySettingsModel { id: qualitySettings - extruderId: base.extruderId - extruderDefinition: base.extruderDefinition - quality: base.quality != null ? base.quality : "" - material: base.material != null ? base.material : "" + selectedPosition: base.extruderPosition + selectedQualityItem: base.qualityItem } SystemPalette { id: palette } diff --git a/resources/qml/Preferences/ProfilesPage.qml b/resources/qml/Preferences/ProfilesPage.qml index e3ba9b23a4..3e10aca000 100644 --- a/resources/qml/Preferences/ProfilesPage.qml +++ b/resources/qml/Preferences/ProfilesPage.qml @@ -1,355 +1,532 @@ -// Copyright (c) 2016 Ultimaker B.V. -// Cura is released under the terms of the LGPLv3 or higher. +// Copyright (c) 2018 Ultimaker B.V. +// Uranium is released under the terms of the LGPLv3 or higher. -import QtQuick 2.1 -import QtQuick.Controls 1.1 +import QtQuick 2.7 +import QtQuick.Controls 1.4 +import QtQuick.Layouts 1.3 import QtQuick.Dialogs 1.2 import UM 1.2 as UM import Cura 1.0 as Cura -UM.ManagementPage + +Item { - id: base; + id: base - title: catalog.i18nc("@title:tab", "Profiles"); - property var extrudersModel: Cura.ExtrudersModel{} + property QtObject qualityManager: CuraApplication.getQualityManager() + property var resetEnabled: false // Keep PreferencesDialog happy + property var extrudersModel: Cura.ExtrudersModel {} - model: Cura.QualityAndUserProfilesModel { } + UM.I18nCatalog { id: catalog; name: "cura"; } - section.property: "readOnly" - section.delegate: Rectangle + Cura.QualityManagementModel { + id: qualitiesModel + } + + Label { + id: titleLabel + anchors { + top: parent.top + left: parent.left + right: parent.right + margins: 5 * screenScaleFactor + } + font.pointSize: 18 + text: catalog.i18nc("@title:tab", "Profiles") + } + + property var hasCurrentItem: qualityListView.currentItem != null + + property var currentItem: { + var current_index = qualityListView.currentIndex; + return qualitiesModel.getItem(current_index); + } + + property var isCurrentItemActivated: { + if (!base.currentItem) { + return false; + } + return base.currentItem.name == Cura.MachineManager.activeQualityOrQualityChangesName; + } + + property var canCreateProfile: { + return isCurrentItemActivated && Cura.MachineManager.hasUserSettings; + } + + Row // Button Row { - height: childrenRect.height; - - Label - { - anchors.left: parent.left; - anchors.leftMargin: UM.Theme.getSize("default_lining").width; - text: section == "true" ? catalog.i18nc("@label", "Protected profiles") : catalog.i18nc("@label", "Custom profiles") - font.bold: true + id: buttonRow + anchors { + left: parent.left + right: parent.right + top: titleLabel.bottom } - } + height: childrenRect.height - activeId: Cura.MachineManager.activeQualityId - activeIndex: { - for(var i = 0; i < model.rowCount(); i++) { - if (model.getItem(i).id == Cura.MachineManager.activeQualityId) { - return i; - } - } - return -1; - } - - function canCreateProfile() { - return base.currentItem && (base.currentItem.id == Cura.MachineManager.activeQualityId) && Cura.MachineManager.hasUserSettings; - } - - buttons: [ + // Activate button Button { - text: catalog.i18nc("@action:button", "Activate"); - iconName: "list-activate"; - enabled: base.currentItem != null ? base.currentItem.id != Cura.MachineManager.activeQualityId : false; - onClicked: - { - Cura.MachineManager.setActiveQuality(base.currentItem.id) - currentItem = base.model.getItem(base.objectList.currentIndex) // Refresh the current item. + text: catalog.i18nc("@action:button", "Activate") + iconName: "list-activate" + enabled: !isCurrentItemActivated + onClicked: { + if (base.currentItem.is_read_only) { + Cura.MachineManager.setQualityGroup(base.currentItem.quality_group); + } else { + Cura.MachineManager.setQualityChangesGroup(base.currentItem.quality_changes_group); + } } - }, + } // Create button Button { text: catalog.i18nc("@label", "Create") - enabled: base.canCreateProfile() && !Cura.MachineManager.stacksHaveErrors - visible: base.canCreateProfile() - iconName: "list-add"; + iconName: "list-add" + enabled: base.canCreateProfile && !Cura.MachineManager.stacksHaveErrors + visible: base.canCreateProfile - onClicked: - { - newNameDialog.object = base.currentItem != null ? Cura.ContainerManager.makeUniqueName(base.currentItem.name) : ""; - newNameDialog.open(); - newNameDialog.selectText(); + onClicked: { + createQualityDialog.object = Cura.ContainerManager.makeUniqueName(base.currentItem.name); + createQualityDialog.open(); + createQualityDialog.selectText(); } - }, + } // Duplicate button Button { text: catalog.i18nc("@label", "Duplicate") - enabled: ! base.canCreateProfile() - visible: ! base.canCreateProfile() - iconName: "list-add"; + iconName: "list-add" + enabled: !base.canCreateProfile + visible: !base.canCreateProfile - onClicked: - { - newDuplicateNameDialog.object = Cura.ContainerManager.makeUniqueName(base.currentItem.name); - newDuplicateNameDialog.open(); - newDuplicateNameDialog.selectText(); + onClicked: { + duplicateQualityDialog.object = Cura.ContainerManager.makeUniqueName(base.currentItem.name); + duplicateQualityDialog.open(); + duplicateQualityDialog.selectText(); } - }, + } + // Remove button Button { - text: catalog.i18nc("@action:button", "Remove"); - iconName: "list-remove"; - enabled: base.currentItem != null ? !base.currentItem.readOnly && !Cura.ContainerManager.isContainerUsed(base.currentItem.id) : false; - onClicked: confirmDialog.open(); - }, - Button - { - text: catalog.i18nc("@action:button", "Rename"); - iconName: "edit-rename"; - enabled: base.currentItem != null ? !base.currentItem.readOnly : false; - onClicked: - { - renameDialog.open(); - renameDialog.selectText(); + text: catalog.i18nc("@action:button", "Remove") + iconName: "list-remove" + enabled: base.hasCurrentItem && !base.currentItem.is_read_only && !base.isCurrentItemActivated + onClicked: { + forceActiveFocus(); + confirmRemoveQualityDialog.open(); } - }, + } + + // Rename button Button { - text: catalog.i18nc("@action:button", "Import"); - iconName: "document-import"; - onClicked: importDialog.open(); - }, + text: catalog.i18nc("@action:button", "Rename") + iconName: "edit-rename" + enabled: base.hasCurrentItem && !base.currentItem.is_read_only + onClicked: { + renameQualityDialog.object = base.currentItem.name; + renameQualityDialog.open(); + renameQualityDialog.selectText(); + } + } + + // Import button + Button + { + text: catalog.i18nc("@action:button", "Import") + iconName: "document-import" + onClicked: { + importDialog.open(); + } + } + + // Export button Button { text: catalog.i18nc("@action:button", "Export") iconName: "document-export" - onClicked: exportDialog.open() - enabled: currentItem != null && !base.currentItem.readOnly + enabled: base.hasCurrentItem && !base.currentItem.is_read_only + onClicked: { + exportDialog.open(); + } } - ] - - scrollviewCaption: catalog.i18nc("@label %1 is printer name","Printer: %1").arg(Cura.MachineManager.activeMachineName) + } + // Click create profile from ... in Profile context menu signal createProfile() onCreateProfile: { - newNameDialog.object = base.currentItem != null ? Cura.ContainerManager.makeUniqueName(base.currentItem.name) : ""; - newNameDialog.open(); - newNameDialog.selectText(); + createQualityDialog.object = Cura.ContainerManager.makeUniqueName(Cura.MachineManager.activeQualityOrQualityChangesName); + createQualityDialog.open(); + createQualityDialog.selectText(); } - signal selectContainer(string name) - onSelectContainer: + // Dialog to request a name when creating a new profile + UM.RenameDialog { - objectList.currentIndex = objectList.model.find("name", name); + id: createQualityDialog + title: catalog.i18nc("@title:window", "Create Profile") + object: "" + onAccepted: + { + base.newQualityNameToSelect = newName; // We want to switch to the new profile once it's created + base.toActivateNewQuality = true; + base.qualityManager.createQualityChanges(newName); + } + } + + property string newQualityNameToSelect: "" + property bool toActivateNewQuality: false + + // This connection makes sure that we will switch to the correct quality after the model gets updated + Connections + { + target: qualitiesModel + onItemsChanged: { + var toSelectItemName = base.currentItem == null ? "" : base.currentItem.name; + if (newQualityNameToSelect != "") { + toSelectItemName = newQualityNameToSelect; + } + + var newIdx = -1; // Default to nothing if nothing can be found + if (toSelectItemName != "") { + // Select the required quality name if given + for (var idx = 0; idx < qualitiesModel.rowCount(); ++idx) { + var item = qualitiesModel.getItem(idx); + if (item.name == toSelectItemName) { + // Switch to the newly created profile if needed + newIdx = idx; + if (base.toActivateNewQuality) { + // Activate this custom quality if required + Cura.MachineManager.setQualityChangesGroup(item.quality_changes_group); + } + break; + } + } + } + qualityListView.currentIndex = newIdx; + + // Reset states + base.newQualityNameToSelect = ""; + base.toActivateNewQuality = false; + } + } + + // Dialog to request a name when duplicating a new profile + UM.RenameDialog + { + id: duplicateQualityDialog + title: catalog.i18nc("@title:window", "Duplicate Profile") + object: "" + onAccepted: + { + base.qualityManager.duplicateQualityChanges(newName, base.currentItem); + } + } + + // Confirmation dialog for removing a profile + MessageDialog + { + id: confirmRemoveQualityDialog + + icon: StandardIcon.Question; + title: catalog.i18nc("@title:window", "Confirm Remove") + text: catalog.i18nc("@label (%1 is object name)", "Are you sure you wish to remove %1? This cannot be undone!").arg(base.currentItem.name) + standardButtons: StandardButton.Yes | StandardButton.No + modality: Qt.ApplicationModal + + onYes: + { + base.qualityManager.removeQualityChangesGroup(base.currentItem.quality_changes_group); + // reset current item to the first if available + qualityListView.currentIndex = -1; // Reset selection. + } + } + + // Dialog to rename a quality profile + UM.RenameDialog + { + id: renameQualityDialog + title: catalog.i18nc("@title:window", "Rename Profile") + object: "" + onAccepted: + { + var actualNewName = base.qualityManager.renameQualityChangesGroup(base.currentItem.quality_changes_group, newName); + base.newQualityNameToSelect = actualNewName; // Select the new name after the model gets updated + } + } + + // Dialog for importing a quality profile + FileDialog + { + id: importDialog + title: catalog.i18nc("@title:window", "Import Profile") + selectExisting: true + nameFilters: qualitiesModel.getFileNameFilters("profile_reader") + folder: CuraApplication.getDefaultPath("dialog_profile_path") + onAccepted: + { + var result = Cura.ContainerManager.importProfile(fileUrl); + messageDialog.text = result.message; + if (result.status == "ok") { + messageDialog.icon = StandardIcon.Information; + } + else if (result.status == "duplicate") { + messageDialog.icon = StandardIcon.Warning; + } + else { + messageDialog.icon = StandardIcon.Critical; + } + messageDialog.open(); + CuraApplication.setDefaultPath("dialog_profile_path", folder); + } + } + + // Dialog for exporting a quality profile + FileDialog + { + id: exportDialog + title: catalog.i18nc("@title:window", "Export Profile") + selectExisting: false + nameFilters: qualitiesModel.getFileNameFilters("profile_writer") + folder: CuraApplication.getDefaultPath("dialog_profile_path") + onAccepted: + { + var result = Cura.ContainerManager.exportQualityChangesGroup(base.currentItem.quality_changes_group, + fileUrl, selectedNameFilter); + + if (result && result.status == "error") { + messageDialog.icon = StandardIcon.Critical; + messageDialog.text = result.message; + messageDialog.open(); + } + + // else pop-up Message thing from python code + CuraApplication.setDefaultPath("dialog_profile_path", folder); + } } Item { - visible: base.currentItem != null - anchors.fill: parent + id: contentsItem - Label { - id: profileName - text: base.currentItem ? base.currentItem.name: "" - font: UM.Theme.getFont("large") - width: parent.width - elide: Text.ElideRight + anchors { + top: titleLabel.bottom + left: parent.left + right: parent.right + bottom: parent.bottom + margins: 5 * screenScaleFactor + bottomMargin: 0 } - Flow { - id: currentSettingsActions - visible: currentItem && currentItem.id == Cura.MachineManager.activeQualityId - anchors.left: parent.left - anchors.right: parent.right - anchors.top: profileName.bottom - anchors.topMargin: UM.Theme.getSize("default_margin").height - - Button - { - text: { - return catalog.i18nc("@action:button", "Update profile with current settings/overrides"); - } - enabled: Cura.MachineManager.hasUserSettings && !Cura.MachineManager.isReadOnly(Cura.MachineManager.activeQualityId) - onClicked: Cura.ContainerManager.updateQualityChanges() - } - - Button - { - text: catalog.i18nc("@action:button", "Discard current changes"); - enabled: Cura.MachineManager.hasUserSettings - onClicked: Cura.ContainerManager.clearUserContainers(); - } - } - - Column { - id: profileNotices - anchors.top: currentSettingsActions.visible ? currentSettingsActions.bottom : currentSettingsActions.anchors.top - anchors.topMargin: UM.Theme.getSize("default_margin").height - anchors.left: parent.left - anchors.right: parent.right - spacing: UM.Theme.getSize("default_margin").height - - Label { - id: defaultsMessage - visible: false - text: catalog.i18nc("@action:label", "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below.") - wrapMode: Text.WordWrap - width: parent.width - } - Label { - id: noCurrentSettingsMessage - visible: currentItem && currentItem.id == Cura.MachineManager.activeQualityId && !Cura.MachineManager.hasUserSettings - text: catalog.i18nc("@action:label", "Your current settings match the selected profile.") - wrapMode: Text.WordWrap - width: parent.width - } - } - - TabView - { - anchors.left: parent.left - anchors.top: profileNotices.visible ? profileNotices.bottom : profileNotices.anchors.top - anchors.topMargin: UM.Theme.getSize("default_margin").height - anchors.right: parent.right - anchors.bottom: parent.bottom - - currentIndex: Cura.ExtruderManager.extruderCount > 0 ? Cura.ExtruderManager.activeExtruderIndex + 1 : 0 - - ProfileTab - { - title: catalog.i18nc("@title:tab", "Global Settings"); - quality: base.currentItem != null ? base.currentItem.id : ""; - material: Cura.MachineManager.allActiveMaterialIds[Cura.MachineManager.activeMachineId] - } - - Repeater - { - model: base.extrudersModel - - ProfileTab - { - title: model.name; - extruderId: model.id; - extruderDefinition: model.definition; - quality: base.currentItem != null ? base.currentItem.id : ""; - material: Cura.MachineManager.allActiveMaterialIds[model.id] - } - } - } + clip: true } Item { - UM.I18nCatalog { id: catalog; name: "cura"; } + anchors { + top: buttonRow.bottom + topMargin: UM.Theme.getSize("default_margin").height + left: parent.left + right: parent.right + bottom: parent.bottom + } - UM.ConfirmRemoveDialog + SystemPalette { id: palette } + + Label { - id: confirmDialog - object: base.currentItem != null ? base.currentItem.name : "" - onYes: + id: captionLabel + anchors { + top: parent.top + left: parent.left + } + visible: text != "" + text: catalog.i18nc("@label %1 is printer name", "Printer: %1").arg(Cura.MachineManager.activeMachineName) + width: profileScrollView.width + elide: Text.ElideRight + } + + ScrollView + { + id: profileScrollView + anchors { + top: captionLabel.visible ? captionLabel.bottom : parent.top + topMargin: captionLabel.visible ? UM.Theme.getSize("default_margin").height : 0 + bottom: parent.bottom + left: parent.left + } + + Rectangle { + parent: viewport + anchors.fill: parent + color: palette.light + } + + width: true ? (parent.width * 0.4) | 0 : parent.width + + ListView { - var name = base.currentItem.name; - Cura.ContainerManager.removeQualityChanges(name) - if(Cura.MachineManager.activeQualityName == name) + id: qualityListView + + model: qualitiesModel + + section.property: "is_read_only" + section.delegate: Rectangle { - Cura.MachineManager.setActiveQuality(base.model.getItem(0).name) + height: childrenRect.height + + Label + { + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_lining").width + text: section == "true" ? catalog.i18nc("@label", "Protected profiles") : catalog.i18nc("@label", "Custom profiles") + font.bold: true + } + } + + delegate: Rectangle + { + width: profileScrollView.width + height: childrenRect.height + color: ListView.isCurrentItem ? palette.highlight : (model.index % 2) ? palette.base : palette.alternateBase + + Row + { + spacing: (UM.Theme.getSize("default_margin").width / 2) | 0 + anchors.left: parent.left + anchors.leftMargin: UM.Theme.getSize("default_margin").width + anchors.right: parent.right + Label + { + width: Math.floor((parent.width * 0.8)) + text: model.name + elide: Text.ElideRight + font.italic: model.name == Cura.MachineManager.activeQualityOrQualityChangesName + color: parent.ListView.isCurrentItem ? palette.highlightedText : palette.text + } + } + + MouseArea + { + anchors.fill: parent + onClicked: { + parent.ListView.view.currentIndex = model.index; + } + } } - objectList.currentIndex = -1 //Reset selection. } } - UM.RenameDialog + // details panel on the right + Item { - title: catalog.i18nc("@title:window", "Rename Profile") - id: renameDialog; - object: base.currentItem != null ? base.currentItem.name : "" - onAccepted: - { - Cura.ContainerManager.renameQualityChanges(base.currentItem.name, newName) - objectList.currentIndex = -1 //Reset selection. + id: detailsPanel + + anchors { + left: profileScrollView.right + leftMargin: UM.Theme.getSize("default_margin").width + top: parent.top + bottom: parent.bottom + right: parent.right } - } - // Dialog to request a name when creating a new profile - UM.RenameDialog - { - title: catalog.i18nc("@title:window", "Create Profile") - id: newNameDialog; - object: ""; - onAccepted: + Item { - var selectedContainer = Cura.ContainerManager.createQualityChanges(newName); - base.selectContainer(selectedContainer); - objectList.currentIndex = -1 //Reset selection. - } - } + anchors.fill: parent - // Dialog to request a name when duplicating a new profile - UM.RenameDialog - { - title: catalog.i18nc("@title:window", "Duplicate Profile") - id: newDuplicateNameDialog; - object: ""; - onAccepted: - { - var selectedContainer = Cura.ContainerManager.duplicateQualityOrQualityChanges(base.currentItem.name, newName); - base.selectContainer(selectedContainer); - objectList.currentIndex = -1 //Reset selection. - } - } - - MessageDialog - { - id: messageDialog - title: catalog.i18nc("@window:title", "Import Profile"); - standardButtons: StandardButton.Ok - modality: Qt.ApplicationModal - } - - FileDialog - { - id: importDialog; - title: catalog.i18nc("@title:window", "Import Profile"); - selectExisting: true; - nameFilters: base.model.getFileNameFilters("profile_reader") - folder: CuraApplication.getDefaultPath("dialog_profile_path") - onAccepted: - { - var result = Cura.ContainerManager.importProfile(fileUrl); - messageDialog.text = result.message - if(result.status == "ok") + Item // Profile title Label { - messageDialog.icon = StandardIcon.Information - } - else if(result.status == "duplicate") - { - messageDialog.icon = StandardIcon.Warning - } - else - { - messageDialog.icon = StandardIcon.Critical - } - messageDialog.open() - CuraApplication.setDefaultPath("dialog_profile_path", folder) - } - } + id: profileName - FileDialog - { - id: exportDialog; - title: catalog.i18nc("@title:window", "Export Profile"); - selectExisting: false; - nameFilters: base.model.getFileNameFilters("profile_writer") - folder: CuraApplication.getDefaultPath("dialog_profile_path") - onAccepted: - { - var containers = Cura.ContainerManager.findInstanceContainers({"type": "quality_changes", "name": base.currentItem.name}) - var result = Cura.ContainerManager.exportProfile(containers, fileUrl, selectedNameFilter) + width: parent.width + height: childrenRect.height - if(result && result.status == "error") - { - messageDialog.icon = StandardIcon.Critical - messageDialog.text = result.message - messageDialog.open() + Label { + text: base.currentItem.name + font: UM.Theme.getFont("large") + } } - // else pop-up Message thing from python code - CuraApplication.setDefaultPath("dialog_profile_path", folder) + Flow { + id: currentSettingsActions + visible: base.hasCurrentItem && base.currentItem.name == Cura.MachineManager.activeQualityOrQualityChangesName + anchors.left: parent.left + anchors.right: parent.right + anchors.top: profileName.bottom + anchors.topMargin: UM.Theme.getSize("default_margin").height + + Button + { + text: catalog.i18nc("@action:button", "Update profile with current settings/overrides") + enabled: Cura.MachineManager.hasUserSettings && !base.currentItem.is_read_only + onClicked: Cura.ContainerManager.updateQualityChanges() + } + + Button + { + text: catalog.i18nc("@action:button", "Discard current changes"); + enabled: Cura.MachineManager.hasUserSettings + onClicked: Cura.ContainerManager.clearUserContainers(); + } + } + + Column { + id: profileNotices + anchors.top: currentSettingsActions.visible ? currentSettingsActions.bottom : currentSettingsActions.anchors.top + anchors.topMargin: UM.Theme.getSize("default_margin").height + anchors.left: parent.left + anchors.right: parent.right + spacing: UM.Theme.getSize("default_margin").height + + Label { + id: defaultsMessage + visible: false + text: catalog.i18nc("@action:label", "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below.") + wrapMode: Text.WordWrap + width: parent.width + } + Label { + id: noCurrentSettingsMessage + visible: base.isCurrentItemActivated && !Cura.MachineManager.hasUserSettings + text: catalog.i18nc("@action:label", "Your current settings match the selected profile.") + wrapMode: Text.WordWrap + width: parent.width + } + } + + + TabView + { + anchors.left: parent.left + anchors.top: profileNotices.visible ? profileNotices.bottom : profileNotices.anchors.top + anchors.topMargin: UM.Theme.getSize("default_margin").height + anchors.right: parent.right + anchors.bottom: parent.bottom + + currentIndex: 0 + + ProfileTab + { + title: catalog.i18nc("@title:tab", "Global Settings") + qualityItem: base.currentItem + } + + Repeater + { + model: base.extrudersModel + + ProfileTab + { + title: model.name + extruderPosition: model.index + qualityItem: base.currentItem + } + } + } } } } diff --git a/resources/qml/Settings/SettingView.qml b/resources/qml/Settings/SettingView.qml index 47c8b188ad..615e66277b 100644 --- a/resources/qml/Settings/SettingView.qml +++ b/resources/qml/Settings/SettingView.qml @@ -57,13 +57,13 @@ Item height: UM.Theme.getSize("setting_control").height anchors.left: globalProfileLabel.right anchors.right: parent.right - tooltip: Cura.MachineManager.activeQualityName + tooltip: Cura.MachineManager.activeQualityOrQualityChangesName style: UM.Theme.styles.sidebar_header_button activeFocusOnPress: true menu: ProfileMenu { } function generateActiveQualityText () { - var result = Cura.MachineManager.activeQualityName; + var result = Cura.MachineManager.activeQualityOrQualityChangesName; if (Cura.MachineManager.isActiveQualitySupported) { if (Cura.MachineManager.activeQualityLayerHeight > 0) { @@ -142,7 +142,7 @@ Item TextField { id: filter; - + height: parent.height anchors.left: parent.left anchors.right: clearFilterButton.left anchors.rightMargin: Math.round(UM.Theme.getSize("sidebar_margin").width) @@ -544,4 +544,4 @@ Item } } } -} \ No newline at end of file +} diff --git a/resources/qml/Sidebar.qml b/resources/qml/Sidebar.qml index ef7b49098a..7a65a278eb 100644 --- a/resources/qml/Sidebar.qml +++ b/resources/qml/Sidebar.qml @@ -526,15 +526,12 @@ Rectangle weights = ["0"]; costs = ["0.00"]; } + var result = lengths.join(" + ") + "m / ~ " + weights.join(" + ") + "g"; if(someCostsKnown) { - return catalog.i18nc("@label Print estimates: m for meters, g for grams, %4 is currency and %3 is print cost", "%1m / ~ %2g / ~ %4 %3").arg(lengths.join(" + ")) - .arg(weights.join(" + ")).arg(costs.join(" + ")).arg(UM.Preferences.getValue("cura/currency")); - } - else - { - return catalog.i18nc("@label Print estimates: m for meters, g for grams", "%1m / ~ %2g").arg(lengths.join(" + ")).arg(weights.join(" + ")); + result += " / ~ " + costs.join(" + ") + " " + UM.Preferences.getValue("cura/currency"); } + return result; } MouseArea { diff --git a/resources/qml/SidebarHeader.qml b/resources/qml/SidebarHeader.qml index 637db76c4f..449600bf61 100644 --- a/resources/qml/SidebarHeader.qml +++ b/resources/qml/SidebarHeader.qml @@ -295,10 +295,20 @@ Column { id: materialSelection - text: Cura.MachineManager.activeMaterialName - tooltip: Cura.MachineManager.activeMaterialName + property var currentRootMaterialName: + { + var materials = Cura.MachineManager.currentRootMaterialName; + var materialName = ""; + if (base.currentExtruderIndex in materials) { + materialName = materials[base.currentExtruderIndex]; + } + return materialName; + } + + text: currentRootMaterialName + tooltip: currentRootMaterialName visible: Cura.MachineManager.hasMaterials - enabled: !extrudersList.visible || base.currentExtruderIndex > -1 + enabled: !extrudersList.visible || base.currentExtruderIndex > -1 height: UM.Theme.getSize("setting_control").height width: Math.round(parent.width * 0.7) + UM.Theme.getSize("sidebar_margin").width anchors.right: parent.right diff --git a/resources/qml/SidebarSimple.qml b/resources/qml/SidebarSimple.qml index ae9fe57b64..cef6f38b4b 100644 --- a/resources/qml/SidebarSimple.qml +++ b/resources/qml/SidebarSimple.qml @@ -1,4 +1,4 @@ -// Copyright (c) 2017 Ultimaker B.V. +// Copyright (c) 2018 Ultimaker B.V. // Cura is released under the terms of the LGPLv3 or higher. import QtQuick 2.7 @@ -7,7 +7,7 @@ import QtQuick.Controls.Styles 1.4 import QtQuick.Layouts 1.3 import UM 1.2 as UM -import Cura 1.2 as Cura +import Cura 1.0 as Cura Item { @@ -57,7 +57,10 @@ Item interval: 50 running: false repeat: false - onTriggered: Cura.MachineManager.setActiveQuality(Cura.ProfilesModel.getItem(qualitySlider.value).id) + onTriggered: { + var item = Cura.QualityProfilesDropDownMenuModel.getItem(qualitySlider.value); + Cura.MachineManager.activeQualityGroup = item.quality_group; + } } Component.onCompleted: qualityModel.update() @@ -102,14 +105,14 @@ Item var availableMin = -1 var availableMax = -1 - for (var i = 0; i < Cura.ProfilesModel.rowCount(); i++) { - var qualityItem = Cura.ProfilesModel.getItem(i) + for (var i = 0; i < Cura.QualityProfilesDropDownMenuModel.rowCount(); i++) { + var qualityItem = Cura.QualityProfilesDropDownMenuModel.getItem(i) // Add each quality item to the UI quality model qualityModel.append(qualityItem) // Set selected value - if (Cura.MachineManager.activeQualityType == qualityItem.metadata.quality_type) { + if (Cura.MachineManager.activeQualityType == qualityItem.quality_type) { // set to -1 when switching to user created profile so all ticks are clickable if (Cura.SimpleModeSettingsManager.isProfileUserCreated) { @@ -134,7 +137,7 @@ Item // Set total available ticks for active slider part if (availableMin != -1) { - qualityModel.availableTotalTicks = availableMax - availableMin + qualityModel.availableTotalTicks = availableMax - availableMin + 1 } // Calculate slider values @@ -161,11 +164,11 @@ Item function reset () { qualityModel.clear() - qualityModel.availableTotalTicks = -1 + qualityModel.availableTotalTicks = 0 qualityModel.existingQualityProfile = 0 // check, the ticks count cannot be less than zero - qualityModel.totalTicks = Math.max(0, Cura.ProfilesModel.rowCount() - 1) + qualityModel.totalTicks = Math.max(0, Cura.QualityProfilesDropDownMenuModel.rowCount() - 1) } } @@ -191,13 +194,13 @@ Item anchors.verticalCenter: parent.verticalCenter anchors.top: parent.top anchors.topMargin: Math.round(UM.Theme.getSize("sidebar_margin").height / 2) - color: (Cura.MachineManager.activeMachine != null && Cura.ProfilesModel.getItem(index).available) ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") + color: (Cura.MachineManager.activeMachine != null && Cura.QualityProfilesDropDownMenuModel.getItem(index).available) ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") text: { var result = "" if(Cura.MachineManager.activeMachine != null) { - result = Cura.ProfilesModel.getItem(index).layer_height_without_unit + result = Cura.QualityProfilesDropDownMenuModel.getItem(index).layer_height if(result == undefined) { @@ -262,7 +265,7 @@ Item Rectangle { anchors.verticalCenter: parent.verticalCenter - color: Cura.ProfilesModel.getItem(index).available ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") + color: Cura.QualityProfilesDropDownMenuModel.getItem(index).available ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") width: 1 * screenScaleFactor height: 6 * screenScaleFactor y: 0 @@ -270,32 +273,24 @@ Item } } - Rectangle { - id: disabledHandleButton - visible: !qualitySlider.visible - anchors.centerIn: parent - color: UM.Theme.getColor("quality_slider_unavailable") - implicitWidth: 10 * screenScaleFactor - implicitHeight: implicitWidth - radius: Math.round(width / 2) - } - Slider { id: qualitySlider height: UM.Theme.getSize("sidebar_margin").height anchors.bottom: speedSlider.bottom - enabled: qualityModel.availableTotalTicks > 0 && !Cura.SimpleModeSettingsManager.isProfileCustomized - visible: qualityModel.totalTicks > 0 + enabled: qualityModel.totalTicks > 0 && !Cura.SimpleModeSettingsManager.isProfileCustomized + visible: qualityModel.availableTotalTicks > 0 updateValueWhileDragging : false minimumValue: qualityModel.qualitySliderAvailableMin >= 0 ? qualityModel.qualitySliderAvailableMin : 0 - maximumValue: qualityModel.qualitySliderAvailableMax >= 0 ? qualityModel.qualitySliderAvailableMax : 0 + // maximumValue must be greater than minimumValue to be able to see the handle. While the value is strictly + // speaking not always correct, it seems to have the correct behavior (switching from 0 available to 1 available) + maximumValue: qualityModel.qualitySliderAvailableMax >= 1 ? qualityModel.qualitySliderAvailableMax : 1 stepSize: 1 value: qualityModel.qualitySliderActiveIndex - width: qualityModel.qualitySliderStepWidth * qualityModel.availableTotalTicks + width: qualityModel.qualitySliderStepWidth * (qualityModel.availableTotalTicks - 1) anchors.right: parent.right anchors.rightMargin: qualityModel.qualitySliderMarginRight @@ -373,7 +368,7 @@ Item text: catalog.i18nc("@label", "Slower") font: UM.Theme.getFont("default") - color: (qualityModel.availableTotalTicks > 0) ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") + color: (qualityModel.availableTotalTicks > 1) ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") horizontalAlignment: Text.AlignLeft } @@ -384,7 +379,7 @@ Item text: catalog.i18nc("@label", "Faster") font: UM.Theme.getFont("default") - color: (qualityModel.availableTotalTicks > 0) ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") + color: (qualityModel.availableTotalTicks > 1) ? UM.Theme.getColor("quality_slider_available") : UM.Theme.getColor("quality_slider_unavailable") horizontalAlignment: Text.AlignRight } @@ -408,9 +403,10 @@ Item // if the current profile is user-created, switch to a built-in quality if (Cura.SimpleModeSettingsManager.isProfileUserCreated) { - if (Cura.ProfilesModel.rowCount() > 0) + if (Cura.QualityProfilesDropDownMenuModel.rowCount() > 0) { - Cura.MachineManager.setActiveQuality(Cura.ProfilesModel.getItem(0).id) + var item = Cura.QualityProfilesDropDownMenuModel.getItem(0); + Cura.MachineManager.activeQualityGroup = item.quality_group; } } if (Cura.SimpleModeSettingsManager.isProfileCustomized) @@ -522,8 +518,7 @@ Item // Update the slider value to represent the rounded value infillSlider.value = roundedSliderValue - // Explicitly cast to string to make sure the value passed to Python is an integer. - infillDensity.setPropertyValue("value", String(roundedSliderValue)) + Cura.MachineManager.setSettingForAllExtruders("infill_sparse_density", "value", roundedSliderValue) } style: SliderStyle @@ -653,14 +648,20 @@ Item onClicked: { // Set to 90% only when enabling gradual infill + var newInfillDensity; if (parseInt(infillSteps.properties.value) == 0) { previousInfillDensity = parseInt(infillDensity.properties.value) - infillDensity.setPropertyValue("value", String(90)) + newInfillDensity = 90; } else { - infillDensity.setPropertyValue("value", String(previousInfillDensity)) + newInfillDensity = previousInfillDensity; } + Cura.MachineManager.setSettingForAllExtruders("infill_sparse_density", "value", String(newInfillDensity)) - infillSteps.setPropertyValue("value", (parseInt(infillSteps.properties.value) == 0) ? 5 : 0) + var infill_steps_value = 0; + if (parseInt(infillSteps.properties.value) == 0) + infill_steps_value = 5; + + Cura.MachineManager.setSettingForAllExtruders("gradual_infill_steps", "value", infill_steps_value) } onEntered: { diff --git a/resources/qml/WorkspaceSummaryDialog.qml b/resources/qml/WorkspaceSummaryDialog.qml index a05dee5a9a..1cfe36d14b 100644 --- a/resources/qml/WorkspaceSummaryDialog.qml +++ b/resources/qml/WorkspaceSummaryDialog.qml @@ -101,7 +101,7 @@ UM.Dialog } Label { - text: Cura.MachineManager.activeDefinitionName + text: Cura.MachineManager.activeMachine.definition.name width: (parent.width / 3) | 0 } } @@ -148,7 +148,7 @@ UM.Dialog Repeater { - model: Cura.MachineManager.activeMaterialNames + model: Cura.MachineManager.currentExtruderPositions delegate: Column { Item // Spacer @@ -158,7 +158,7 @@ UM.Dialog } Label { - text: catalog.i18nc("@action:label", "Extruder %1").arg(index+1) + text: catalog.i18nc("@action:label", "Extruder %1").arg(modelData) } height: childrenRect.height width: parent.width @@ -173,7 +173,7 @@ UM.Dialog } Label { - text: Cura.MachineManager.activeVariantNames[index] + ", " + modelData + text: Cura.MachineManager.activeVariantNames[modelData] + ", " + Cura.MachineManager.currentRootMaterialName[modelData] width: (parent.width / 3) | 0 } } @@ -217,7 +217,7 @@ UM.Dialog } Label { - text: Cura.MachineManager.activeQualityName + text: Cura.MachineManager.activeQualityOrQualityChangesName width: (parent.width / 3) | 0 } @@ -294,4 +294,4 @@ UM.Dialog } } } -} \ No newline at end of file +} diff --git a/resources/quality/abax_pri3/apri3_pla_fast.inst.cfg b/resources/quality/abax_pri3/apri3_pla_fast.inst.cfg index 32550d86a5..7d1c1bf588 100644 --- a/resources/quality/abax_pri3/apri3_pla_fast.inst.cfg +++ b/resources/quality/abax_pri3/apri3_pla_fast.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = abax_pri3 [metadata] -type = quality -material = generic_pla -weight = -1 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = -1 +material = generic_pla [values] layer_height = 0.2 @@ -19,4 +19,4 @@ speed_print = 80 speed_layer_0 = =round(speed_print * 30 / 50) speed_topbottom = 20 cool_min_layer_time = 5 -cool_min_speed = 10 \ No newline at end of file +cool_min_speed = 10 diff --git a/resources/quality/abax_pri3/apri3_pla_high.inst.cfg b/resources/quality/abax_pri3/apri3_pla_high.inst.cfg index 2007785719..46a4178dd9 100644 --- a/resources/quality/abax_pri3/apri3_pla_high.inst.cfg +++ b/resources/quality/abax_pri3/apri3_pla_high.inst.cfg @@ -4,11 +4,11 @@ name = Extra Fine definition = abax_pri3 [metadata] -type = quality -material = generic_pla -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_pla [values] layer_height = 0.1 @@ -19,4 +19,4 @@ speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) speed_topbottom = 20 cool_min_layer_time = 5 -cool_min_speed = 10 \ No newline at end of file +cool_min_speed = 10 diff --git a/resources/quality/abax_pri3/apri3_pla_normal.inst.cfg b/resources/quality/abax_pri3/apri3_pla_normal.inst.cfg index dba0a0460f..3f6f36cfe6 100644 --- a/resources/quality/abax_pri3/apri3_pla_normal.inst.cfg +++ b/resources/quality/abax_pri3/apri3_pla_normal.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = abax_pri3 [metadata] -type = quality -material = generic_pla -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pla [values] layer_height = 0.2 @@ -19,4 +19,4 @@ speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) speed_topbottom = 20 cool_min_layer_time = 5 -cool_min_speed = 10 \ No newline at end of file +cool_min_speed = 10 diff --git a/resources/quality/abax_pri5/apri5_pla_fast.inst.cfg b/resources/quality/abax_pri5/apri5_pla_fast.inst.cfg index 11892a6223..517c767ac5 100644 --- a/resources/quality/abax_pri5/apri5_pla_fast.inst.cfg +++ b/resources/quality/abax_pri5/apri5_pla_fast.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = abax_pri5 [metadata] -type = quality -material = generic_pla -weight = -1 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = -1 +material = generic_pla [values] layer_height = 0.2 @@ -19,4 +19,4 @@ speed_print = 80 speed_layer_0 = =round(speed_print * 30 / 50) speed_topbottom = 20 cool_min_layer_time = 5 -cool_min_speed = 10 \ No newline at end of file +cool_min_speed = 10 diff --git a/resources/quality/abax_pri5/apri5_pla_high.inst.cfg b/resources/quality/abax_pri5/apri5_pla_high.inst.cfg index 852efe699e..01699e39f6 100644 --- a/resources/quality/abax_pri5/apri5_pla_high.inst.cfg +++ b/resources/quality/abax_pri5/apri5_pla_high.inst.cfg @@ -4,11 +4,11 @@ name = Extra Fine definition = abax_pri5 [metadata] -type = quality -material = generic_pla -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_pla [values] layer_height = 0.1 @@ -19,4 +19,4 @@ speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) speed_topbottom = 20 cool_min_layer_time = 5 -cool_min_speed = 10 \ No newline at end of file +cool_min_speed = 10 diff --git a/resources/quality/abax_pri5/apri5_pla_normal.inst.cfg b/resources/quality/abax_pri5/apri5_pla_normal.inst.cfg index 244d544c80..ea1023dc43 100644 --- a/resources/quality/abax_pri5/apri5_pla_normal.inst.cfg +++ b/resources/quality/abax_pri5/apri5_pla_normal.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = abax_pri5 [metadata] -type = quality -material = generic_pla -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pla [values] layer_height = 0.2 @@ -19,4 +19,4 @@ speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) speed_topbottom = 20 cool_min_layer_time = 5 -cool_min_speed = 10 \ No newline at end of file +cool_min_speed = 10 diff --git a/resources/quality/abax_titan/atitan_pla_fast.inst.cfg b/resources/quality/abax_titan/atitan_pla_fast.inst.cfg index a2d802a3ba..ae489c3792 100644 --- a/resources/quality/abax_titan/atitan_pla_fast.inst.cfg +++ b/resources/quality/abax_titan/atitan_pla_fast.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = abax_titan [metadata] -type = quality -material = generic_pla -weight = -1 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = -1 +material = generic_pla [values] layer_height = 0.2 @@ -19,4 +19,4 @@ speed_print = 80 speed_layer_0 = =round(speed_print * 30 / 50) speed_topbottom = 20 cool_min_layer_time = 5 -cool_min_speed = 10 \ No newline at end of file +cool_min_speed = 10 diff --git a/resources/quality/abax_titan/atitan_pla_high.inst.cfg b/resources/quality/abax_titan/atitan_pla_high.inst.cfg index 7ee8c35133..f9bf350814 100644 --- a/resources/quality/abax_titan/atitan_pla_high.inst.cfg +++ b/resources/quality/abax_titan/atitan_pla_high.inst.cfg @@ -2,12 +2,13 @@ version = 2 name = Extra Fine definition = abax_titan + [metadata] -type = quality -material = generic_pla -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_pla [values] layer_height = 0.1 @@ -18,4 +19,4 @@ speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) speed_topbottom = 20 cool_min_layer_time = 5 -cool_min_speed = 10 \ No newline at end of file +cool_min_speed = 10 diff --git a/resources/quality/abax_titan/atitan_pla_normal.inst.cfg b/resources/quality/abax_titan/atitan_pla_normal.inst.cfg index 6c40914566..c73d6901fb 100644 --- a/resources/quality/abax_titan/atitan_pla_normal.inst.cfg +++ b/resources/quality/abax_titan/atitan_pla_normal.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = abax_titan [metadata] -type = quality -material = generic_pla -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pla [values] layer_height = 0.2 @@ -19,4 +19,4 @@ speed_print = 50 speed_layer_0 = =round(speed_print * 30 / 50) speed_topbottom = 20 cool_min_layer_time = 5 -cool_min_speed = 10 \ No newline at end of file +cool_min_speed = 10 diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg index c6281767f9..caa6d8edb6 100644 --- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg +++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_draft.inst.cfg @@ -4,10 +4,10 @@ name = Draft definition = anycubic_i3_mega [metadata] +setting_version = 4 type = quality quality_type = draft weight = 0 -setting_version = 4 [values] acceleration_enabled = True @@ -57,4 +57,4 @@ support_type = everywhere support_use_towers = False support_xy_distance = 0.7 top_bottom_thickness = 1.2 -wall_thickness = 1.2 \ No newline at end of file +wall_thickness = 1.2 diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg index 839054a4df..5d6f8d9013 100644 --- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg +++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_high.inst.cfg @@ -4,10 +4,10 @@ name = High definition = anycubic_i3_mega [metadata] +setting_version = 4 type = quality quality_type = high weight = 2 -setting_version = 4 [values] acceleration_enabled = True @@ -57,4 +57,4 @@ support_type = everywhere support_use_towers = False support_xy_distance = 0.7 top_bottom_thickness = 1.2 -wall_thickness = 1.2 \ No newline at end of file +wall_thickness = 1.2 diff --git a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg index 241a8b2e2c..ca25afa424 100644 --- a/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg +++ b/resources/quality/anycubic_i3_mega/anycubic_i3_mega_normal.inst.cfg @@ -4,10 +4,10 @@ name = Normal definition = anycubic_i3_mega [metadata] +setting_version = 4 type = quality quality_type = normal weight = 1 -setting_version = 4 [values] acceleration_enabled = True @@ -57,4 +57,4 @@ support_type = everywhere support_use_towers = False support_xy_distance = 0.7 top_bottom_thickness = 1.2 -wall_thickness = 1.2 \ No newline at end of file +wall_thickness = 1.2 diff --git a/resources/quality/builder_premium/bp_BVOH_Coarse_Quality.inst.cfg b/resources/quality/builder_premium/bp_BVOH_Coarse_Quality.inst.cfg index 92f899bdeb..d83f2a1ccd 100644 --- a/resources/quality/builder_premium/bp_BVOH_Coarse_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_BVOH_Coarse_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Coarse definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = coarse -material = verbatim_bvoh_175 -setting_version = 4 weight = -1 +material = verbatim_bvoh_175 [values] material_print_temperature = =default_material_print_temperature + 5 @@ -21,4 +21,3 @@ layer_height = 0.3 top_thickness = =layer_height * 5 bottom_thickness = =layer_height * 3 speed_print = 40 - diff --git a/resources/quality/builder_premium/bp_BVOH_High_Quality.inst.cfg b/resources/quality/builder_premium/bp_BVOH_High_Quality.inst.cfg index cd8947aa80..f029a0206f 100644 --- a/resources/quality/builder_premium/bp_BVOH_High_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_BVOH_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High Quality definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = high -material = verbatim_bvoh_175 -setting_version = 4 weight = 1 +material = verbatim_bvoh_175 [values] acceleration_print = 2000 @@ -22,4 +22,4 @@ layer_height = 0.1 top_thickness = =layer_height * 7 bottom_thickness = =layer_height * 5 speed_print = 40 -layer_height_0 = 0.2 \ No newline at end of file +layer_height_0 = 0.2 diff --git a/resources/quality/builder_premium/bp_BVOH_Normal_Quality.inst.cfg b/resources/quality/builder_premium/bp_BVOH_Normal_Quality.inst.cfg index d59f768470..640812b37d 100644 --- a/resources/quality/builder_premium/bp_BVOH_Normal_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_BVOH_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = normal -material = verbatim_bvoh_175 -setting_version = 4 weight = 0 +material = verbatim_bvoh_175 [values] material_print_temperature = =default_material_print_temperature + 5 @@ -20,4 +20,4 @@ material_bed_temperature_layer_0= =material_bed_temperature layer_height = 0.2 top_thickness = =layer_height * 5 bottom_thickness = =layer_height * 3 -speed_print = 40 \ No newline at end of file +speed_print = 40 diff --git a/resources/quality/builder_premium/bp_Innoflex60_Coarse_Quality.inst.cfg b/resources/quality/builder_premium/bp_Innoflex60_Coarse_Quality.inst.cfg index 41d882ee1d..905cf50518 100644 --- a/resources/quality/builder_premium/bp_Innoflex60_Coarse_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_Innoflex60_Coarse_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Coarse definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = coarse -material = innofill_innoflex60_175 -setting_version = 4 weight = -1 +material = innofill_innoflex60_175 [values] material_print_temperature = =default_material_print_temperature @@ -21,4 +21,3 @@ layer_height = 0.3 top_thickness = =layer_height * 5 bottom_thickness = =layer_height * 3 speed_print = 30 - diff --git a/resources/quality/builder_premium/bp_Innoflex60_High_Quality.inst.cfg b/resources/quality/builder_premium/bp_Innoflex60_High_Quality.inst.cfg index 147e1f4db8..835ce04d61 100644 --- a/resources/quality/builder_premium/bp_Innoflex60_High_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_Innoflex60_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High Quality definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = high -material = innofill_innoflex60_175 -setting_version = 4 weight = 1 +material = innofill_innoflex60_175 [values] acceleration_print = 2000 @@ -22,4 +22,4 @@ layer_height = 0.1 top_thickness = =layer_height * 7 bottom_thickness = =layer_height * 5 speed_print = 30 -layer_height_0 = 0.2 \ No newline at end of file +layer_height_0 = 0.2 diff --git a/resources/quality/builder_premium/bp_Innoflex60_Normal_Quality.inst.cfg b/resources/quality/builder_premium/bp_Innoflex60_Normal_Quality.inst.cfg index fb43c8de19..ba176dbc5c 100644 --- a/resources/quality/builder_premium/bp_Innoflex60_Normal_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_Innoflex60_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = normal -material = innofill_innoflex60_175 -setting_version = 4 weight = 0 +material = innofill_innoflex60_175 [values] material_print_temperature = =default_material_print_temperature @@ -20,4 +20,4 @@ material_bed_temperature_layer_0= =material_bed_temperature layer_height = 0.2 top_thickness = =layer_height * 5 bottom_thickness = =layer_height * 3 -speed_print = 30 \ No newline at end of file +speed_print = 30 diff --git a/resources/quality/builder_premium/bp_PET_Coarse_Quality.inst.cfg b/resources/quality/builder_premium/bp_PET_Coarse_Quality.inst.cfg index f887600585..736defd5c6 100644 --- a/resources/quality/builder_premium/bp_PET_Coarse_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_PET_Coarse_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Coarse definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = coarse -material = generic_petg_175 -setting_version = 4 weight = -1 +material = generic_petg [values] material_print_temperature = =default_material_print_temperature - 5 @@ -21,4 +21,3 @@ layer_height = 0.3 top_thickness = =layer_height * 5 bottom_thickness = =layer_height * 3 speed_print = 60 - diff --git a/resources/quality/builder_premium/bp_PET_High_Quality.inst.cfg b/resources/quality/builder_premium/bp_PET_High_Quality.inst.cfg index 4258f2f708..82c7fa7baf 100644 --- a/resources/quality/builder_premium/bp_PET_High_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_PET_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High Quality definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_petg_175 -setting_version = 4 weight = 1 +material = generic_petg [values] acceleration_print = 2000 @@ -22,4 +22,4 @@ layer_height = 0.1 top_thickness = =layer_height * 7 bottom_thickness = =layer_height * 5 speed_print = 40 -layer_height_0 = 0.2 \ No newline at end of file +layer_height_0 = 0.2 diff --git a/resources/quality/builder_premium/bp_PET_Normal_Quality.inst.cfg b/resources/quality/builder_premium/bp_PET_Normal_Quality.inst.cfg index b732073795..b1e9ff91df 100644 --- a/resources/quality/builder_premium/bp_PET_Normal_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_PET_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_petg_175 -setting_version = 4 weight = 0 +material = generic_petg [values] material_print_temperature = =default_material_print_temperature - 5 @@ -20,4 +20,4 @@ material_bed_temperature_layer_0= =material_bed_temperature layer_height = 0.2 top_thickness = =layer_height * 5 bottom_thickness = =layer_height * 3 -speed_print = 50 \ No newline at end of file +speed_print = 50 diff --git a/resources/quality/builder_premium/bp_PLA_Coarse_Quality.inst.cfg b/resources/quality/builder_premium/bp_PLA_Coarse_Quality.inst.cfg index 4f0c26dd7d..9b8078e266 100644 --- a/resources/quality/builder_premium/bp_PLA_Coarse_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_PLA_Coarse_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Coarse definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = coarse -material = generic_pla_175 -setting_version = 4 weight = -1 +material = generic_pla [values] material_print_temperature = =default_material_print_temperature + 15 @@ -21,4 +21,3 @@ layer_height = 0.3 top_thickness = =layer_height * 5 bottom_thickness = =layer_height * 3 speed_print = 60 - diff --git a/resources/quality/builder_premium/bp_PLA_High_Quality.inst.cfg b/resources/quality/builder_premium/bp_PLA_High_Quality.inst.cfg index 4a9bcb90bf..2bbfb02e0d 100644 --- a/resources/quality/builder_premium/bp_PLA_High_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_PLA_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High Quality definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pla_175 -setting_version = 4 weight = 1 +material = generic_pla [values] acceleration_print = 2000 @@ -22,4 +22,4 @@ layer_height = 0.1 top_thickness = =layer_height * 7 bottom_thickness = =layer_height * 5 speed_print = 40 -layer_height_0 = 0.2 \ No newline at end of file +layer_height_0 = 0.2 diff --git a/resources/quality/builder_premium/bp_PLA_Normal_Quality.inst.cfg b/resources/quality/builder_premium/bp_PLA_Normal_Quality.inst.cfg index 6af5601fd6..b77ac747a8 100644 --- a/resources/quality/builder_premium/bp_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_PLA_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pla_175 -setting_version = 4 weight = 0 +material = generic_pla [values] material_print_temperature = =default_material_print_temperature + 15 @@ -20,4 +20,4 @@ material_bed_temperature_layer_0= =material_bed_temperature layer_height = 0.2 top_thickness = =layer_height * 5 bottom_thickness = =layer_height * 3 -speed_print = 50 \ No newline at end of file +speed_print = 50 diff --git a/resources/quality/builder_premium/bp_PVA_Coarse_Quality.inst.cfg b/resources/quality/builder_premium/bp_PVA_Coarse_Quality.inst.cfg index 12a4c9d883..f626604f70 100644 --- a/resources/quality/builder_premium/bp_PVA_Coarse_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_PVA_Coarse_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Coarse definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = coarse -material = generic_pva_175 -setting_version = 4 weight = -1 +material = generic_pva [values] material_print_temperature = =default_material_print_temperature + 10 @@ -21,4 +21,3 @@ layer_height = 0.3 top_thickness = =layer_height * 5 bottom_thickness = =layer_height * 3 speed_print = 40 - diff --git a/resources/quality/builder_premium/bp_PVA_High_Quality.inst.cfg b/resources/quality/builder_premium/bp_PVA_High_Quality.inst.cfg index d32017c5f2..caf0bd4bd7 100644 --- a/resources/quality/builder_premium/bp_PVA_High_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_PVA_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High Quality definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pva_175 -setting_version = 4 weight = 1 +material = generic_pva [values] acceleration_print = 2000 @@ -22,4 +22,4 @@ layer_height = 0.1 top_thickness = =layer_height * 7 bottom_thickness = =layer_height * 5 speed_print = 40 -layer_height_0 = 0.2 \ No newline at end of file +layer_height_0 = 0.2 diff --git a/resources/quality/builder_premium/bp_PVA_Normal_Quality.inst.cfg b/resources/quality/builder_premium/bp_PVA_Normal_Quality.inst.cfg index 2acc354822..4f08010a6f 100644 --- a/resources/quality/builder_premium/bp_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_PVA_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pva_175 -setting_version = 4 weight = 0 +material = generic_pva [values] material_print_temperature = =default_material_print_temperature + 10 @@ -20,4 +20,4 @@ material_bed_temperature_layer_0= =material_bed_temperature layer_height = 0.2 top_thickness = =layer_height * 5 bottom_thickness = =layer_height * 3 -speed_print = 40 \ No newline at end of file +speed_print = 40 diff --git a/resources/quality/builder_premium/bp_global_Coarse_Quality.inst.cfg b/resources/quality/builder_premium/bp_global_Coarse_Quality.inst.cfg index 4b66293d04..c9b2b3a654 100644 --- a/resources/quality/builder_premium/bp_global_Coarse_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_global_Coarse_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Coarse definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = coarse -setting_version = 4 weight = -1 global_quality = True [values] -layer_height = 0.3 \ No newline at end of file +layer_height = 0.3 diff --git a/resources/quality/builder_premium/bp_global_High_Quality.inst.cfg b/resources/quality/builder_premium/bp_global_High_Quality.inst.cfg index 4a97dda084..efad0f96e5 100644 --- a/resources/quality/builder_premium/bp_global_High_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_global_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High Quality definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = high -setting_version = 4 weight = 1 global_quality = True [values] -layer_height = 0.1 \ No newline at end of file +layer_height = 0.1 diff --git a/resources/quality/builder_premium/bp_global_Normal_Quality.inst.cfg b/resources/quality/builder_premium/bp_global_Normal_Quality.inst.cfg index 15ea66879f..69c6214aa8 100644 --- a/resources/quality/builder_premium/bp_global_Normal_Quality.inst.cfg +++ b/resources/quality/builder_premium/bp_global_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = builder_premium_small [metadata] +setting_version = 4 type = quality quality_type = normal -setting_version = 4 weight = 0 global_quality = True [values] -layer_height = 0.2 \ No newline at end of file +layer_height = 0.2 diff --git a/resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg index 418855a9ba..82cbed79e3 100644 --- a/resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg +++ b/resources/quality/cartesio/abs/cartesio_0.25_abs_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_abs_175_cartesio_0.25_mm weight = 1 -setting_version = 4 +material = generic_abs +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/abs/cartesio_0.25_abs_normal.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.25_abs_normal.inst.cfg index e95ef08e22..4c8da554d3 100644 --- a/resources/quality/cartesio/abs/cartesio_0.25_abs_normal.inst.cfg +++ b/resources/quality/cartesio/abs/cartesio_0.25_abs_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_abs_175_cartesio_0.25_mm weight = 2 -setting_version = 4 +material = generic_abs +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg index 524f5ba12a..1e068c97c7 100644 --- a/resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg +++ b/resources/quality/cartesio/abs/cartesio_0.4_abs_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_abs_175_cartesio_0.4_mm weight = 1 -setting_version = 4 +material = generic_abs +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/abs/cartesio_0.4_abs_normal.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.4_abs_normal.inst.cfg index 24ffb19d6f..7019eb7a5b 100644 --- a/resources/quality/cartesio/abs/cartesio_0.4_abs_normal.inst.cfg +++ b/resources/quality/cartesio/abs/cartesio_0.4_abs_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_abs_175_cartesio_0.4_mm weight = 2 -setting_version = 4 +material = generic_abs +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/abs/cartesio_0.8_abs_coarse.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.8_abs_coarse.inst.cfg index 1281a3afdd..7b12575e69 100644 --- a/resources/quality/cartesio/abs/cartesio_0.8_abs_coarse.inst.cfg +++ b/resources/quality/cartesio/abs/cartesio_0.8_abs_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = coarse -material = generic_abs_175_cartesio_0.8_mm weight = 3 -setting_version = 4 +material = generic_abs +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/abs/cartesio_0.8_abs_extra_coarse.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.8_abs_extra_coarse.inst.cfg index a8d19deef7..bc25bf8d00 100644 --- a/resources/quality/cartesio/abs/cartesio_0.8_abs_extra_coarse.inst.cfg +++ b/resources/quality/cartesio/abs/cartesio_0.8_abs_extra_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Extra Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = extra coarse -material = generic_abs_175_cartesio_0.8_mm weight = 4 -setting_version = 4 +material = generic_abs +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg index 87cc855f44..b8ca55fa6e 100644 --- a/resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg +++ b/resources/quality/cartesio/abs/cartesio_0.8_abs_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_abs_175_cartesio_0.8_mm weight = 1 -setting_version = 4 +material = generic_abs +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/abs/cartesio_0.8_abs_normal.inst.cfg b/resources/quality/cartesio/abs/cartesio_0.8_abs_normal.inst.cfg index 4ca2598051..409e0f9adf 100644 --- a/resources/quality/cartesio/abs/cartesio_0.8_abs_normal.inst.cfg +++ b/resources/quality/cartesio/abs/cartesio_0.8_abs_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_abs_175_cartesio_0.8_mm weight = 2 -setting_version = 4 +material = generic_abs +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg index 42eb705f11..11d541831d 100644 --- a/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg +++ b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = dsm_arnitel2045_175_cartesio_0.4_mm weight = 1 -setting_version = 4 +material = dsm_arnitel2045_175 +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 2 diff --git a/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg index 538fe91b76..d6a972b1cd 100644 --- a/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg +++ b/resources/quality/cartesio/arnitel/cartesio_0.4_arnitel2045_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = dsm_arnitel2045_175_cartesio_0.4_mm weight = 2 -setting_version = 4 +material = dsm_arnitel2045_175 +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 2 diff --git a/resources/quality/cartesio/cartesio_global_Coarse_Quality.inst.cfg b/resources/quality/cartesio/cartesio_global_Coarse_Quality.inst.cfg index 11760b139f..53cbb6bf06 100644 --- a/resources/quality/cartesio/cartesio_global_Coarse_Quality.inst.cfg +++ b/resources/quality/cartesio/cartesio_global_Coarse_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = coarse -global_quality = True weight = -3 -setting_version = 4 +global_quality = True [values] layer_height = 0.4 diff --git a/resources/quality/cartesio/cartesio_global_Extra_Coarse_Quality.inst.cfg b/resources/quality/cartesio/cartesio_global_Extra_Coarse_Quality.inst.cfg index c654dba598..4d612db89f 100644 --- a/resources/quality/cartesio/cartesio_global_Extra_Coarse_Quality.inst.cfg +++ b/resources/quality/cartesio/cartesio_global_Extra_Coarse_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Extra Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = extra coarse -global_quality = True weight = -4 -setting_version = 4 +global_quality = True [values] layer_height = 0.6 diff --git a/resources/quality/cartesio/cartesio_global_High_Quality.inst.cfg b/resources/quality/cartesio/cartesio_global_High_Quality.inst.cfg index 393a5f3b39..b9e4f287a1 100644 --- a/resources/quality/cartesio/cartesio_global_High_Quality.inst.cfg +++ b/resources/quality/cartesio/cartesio_global_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -global_quality = True weight = 1 -setting_version = 4 +global_quality = True [values] layer_height = 0.1 diff --git a/resources/quality/cartesio/cartesio_global_Normal_Quality.inst.cfg b/resources/quality/cartesio/cartesio_global_Normal_Quality.inst.cfg index c09493ba10..1b3af7c9ce 100644 --- a/resources/quality/cartesio/cartesio_global_Normal_Quality.inst.cfg +++ b/resources/quality/cartesio/cartesio_global_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -global_quality = True weight = 0 -setting_version = 4 +global_quality = True [values] layer_height = 0.2 diff --git a/resources/quality/cartesio/hips/cartesio_0.25_hips_high.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.25_hips_high.inst.cfg index eae4e82cd3..df6ca1d0a0 100644 --- a/resources/quality/cartesio/hips/cartesio_0.25_hips_high.inst.cfg +++ b/resources/quality/cartesio/hips/cartesio_0.25_hips_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_hips_175_cartesio_0.25_mm weight = 1 -setting_version = 4 +material = generic_hips +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/hips/cartesio_0.25_hips_normal.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.25_hips_normal.inst.cfg index 0c47b18196..663276681f 100644 --- a/resources/quality/cartesio/hips/cartesio_0.25_hips_normal.inst.cfg +++ b/resources/quality/cartesio/hips/cartesio_0.25_hips_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_hips_175_cartesio_0.25_mm weight = 2 -setting_version = 4 +material = generic_hips +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/hips/cartesio_0.4_hips_high.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.4_hips_high.inst.cfg index 14f1ea4662..54b6edc507 100644 --- a/resources/quality/cartesio/hips/cartesio_0.4_hips_high.inst.cfg +++ b/resources/quality/cartesio/hips/cartesio_0.4_hips_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_hips_175_cartesio_0.4_mm weight = 1 -setting_version = 4 +material = generic_hips +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/hips/cartesio_0.4_hips_normal.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.4_hips_normal.inst.cfg index bd13b358ff..c843f1653d 100644 --- a/resources/quality/cartesio/hips/cartesio_0.4_hips_normal.inst.cfg +++ b/resources/quality/cartesio/hips/cartesio_0.4_hips_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_hips_175_cartesio_0.4_mm weight = 2 -setting_version = 4 +material = generic_hips +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/hips/cartesio_0.8_hips_coarse.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.8_hips_coarse.inst.cfg index ca864692c3..d848e3ee3b 100644 --- a/resources/quality/cartesio/hips/cartesio_0.8_hips_coarse.inst.cfg +++ b/resources/quality/cartesio/hips/cartesio_0.8_hips_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = coarse -material = generic_hips_175_cartesio_0.8_mm weight = 3 -setting_version = 4 +material = generic_hips +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/hips/cartesio_0.8_hips_extra_coarse.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.8_hips_extra_coarse.inst.cfg index 3cadef4fdd..7f2d436f32 100644 --- a/resources/quality/cartesio/hips/cartesio_0.8_hips_extra_coarse.inst.cfg +++ b/resources/quality/cartesio/hips/cartesio_0.8_hips_extra_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Extra Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = extra coarse -material = generic_hips_175_cartesio_0.8_mm weight = 4 -setting_version = 4 +material = generic_hips +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/hips/cartesio_0.8_hips_high.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.8_hips_high.inst.cfg index 07839c8a9a..0e529a97e9 100644 --- a/resources/quality/cartesio/hips/cartesio_0.8_hips_high.inst.cfg +++ b/resources/quality/cartesio/hips/cartesio_0.8_hips_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_hips_175_cartesio_0.8_mm weight = 1 -setting_version = 4 +material = generic_hips +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/hips/cartesio_0.8_hips_normal.inst.cfg b/resources/quality/cartesio/hips/cartesio_0.8_hips_normal.inst.cfg index acc9db0891..7c4fcbcfdd 100644 --- a/resources/quality/cartesio/hips/cartesio_0.8_hips_normal.inst.cfg +++ b/resources/quality/cartesio/hips/cartesio_0.8_hips_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_hips_175_cartesio_0.8_mm weight = 2 -setting_version = 4 +material = generic_hips +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/nylon/cartesio_0.25_nylon_high.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.25_nylon_high.inst.cfg index b1f2f17d41..7690040f8c 100644 --- a/resources/quality/cartesio/nylon/cartesio_0.25_nylon_high.inst.cfg +++ b/resources/quality/cartesio/nylon/cartesio_0.25_nylon_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_nylon_175_cartesio_0.25_mm weight = 1 -setting_version = 4 +material = generic_nylon +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/nylon/cartesio_0.25_nylon_normal.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.25_nylon_normal.inst.cfg index bcfa1c2e30..fcff2b6e4b 100644 --- a/resources/quality/cartesio/nylon/cartesio_0.25_nylon_normal.inst.cfg +++ b/resources/quality/cartesio/nylon/cartesio_0.25_nylon_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_nylon_175_cartesio_0.25_mm weight = 2 -setting_version = 4 +material = generic_nylon +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/nylon/cartesio_0.4_nylon_high.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.4_nylon_high.inst.cfg index 2cd50efeb2..0cca726dcc 100644 --- a/resources/quality/cartesio/nylon/cartesio_0.4_nylon_high.inst.cfg +++ b/resources/quality/cartesio/nylon/cartesio_0.4_nylon_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_nylon_175_cartesio_0.4_mm weight = 1 -setting_version = 4 +material = generic_nylon +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/nylon/cartesio_0.4_nylon_normal.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.4_nylon_normal.inst.cfg index 7a7d767ea3..d231b7c296 100644 --- a/resources/quality/cartesio/nylon/cartesio_0.4_nylon_normal.inst.cfg +++ b/resources/quality/cartesio/nylon/cartesio_0.4_nylon_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_nylon_175_cartesio_0.4_mm weight = 2 -setting_version = 4 +material = generic_nylon +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_coarse.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_coarse.inst.cfg index 5684c89e23..22eb78ec00 100644 --- a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_coarse.inst.cfg +++ b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = coarse -material = generic_nylon_175_cartesio_0.8_mm weight = 3 -setting_version = 4 +material = generic_nylon +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_extra_coarse.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_extra_coarse.inst.cfg index 8d97e9ac5f..31f5d45a88 100644 --- a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_extra_coarse.inst.cfg +++ b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_extra_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Extra Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = extra coarse -material = generic_nylon_175_cartesio_0.8_mm weight = 4 -setting_version = 4 +material = generic_nylon +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_high.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_high.inst.cfg index 946f8de34d..9287ec9a4c 100644 --- a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_high.inst.cfg +++ b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_nylon_175_cartesio_0.8_mm weight = 1 -setting_version = 4 +material = generic_nylon +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_normal.inst.cfg b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_normal.inst.cfg index 80f390c254..ecf83c29bd 100644 --- a/resources/quality/cartesio/nylon/cartesio_0.8_nylon_normal.inst.cfg +++ b/resources/quality/cartesio/nylon/cartesio_0.8_nylon_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_nylon_175_cartesio_0.8_mm weight = 2 -setting_version = 4 +material = generic_nylon +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pc/cartesio_0.25_pc_high.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.25_pc_high.inst.cfg index ff6547dd91..23df3d0451 100644 --- a/resources/quality/cartesio/pc/cartesio_0.25_pc_high.inst.cfg +++ b/resources/quality/cartesio/pc/cartesio_0.25_pc_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pc_175_cartesio_0.25_mm weight = 1 -setting_version = 4 +material = generic_pc +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pc/cartesio_0.25_pc_normal.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.25_pc_normal.inst.cfg index f3faa9c129..0ac876a538 100644 --- a/resources/quality/cartesio/pc/cartesio_0.25_pc_normal.inst.cfg +++ b/resources/quality/cartesio/pc/cartesio_0.25_pc_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pc_175_cartesio_0.25_mm weight = 2 -setting_version = 4 +material = generic_pc +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pc/cartesio_0.4_pc_high.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.4_pc_high.inst.cfg index 3aa808fab5..0c92dc32fc 100644 --- a/resources/quality/cartesio/pc/cartesio_0.4_pc_high.inst.cfg +++ b/resources/quality/cartesio/pc/cartesio_0.4_pc_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pc_175_cartesio_0.4_mm weight = 1 -setting_version = 4 +material = generic_pc +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pc/cartesio_0.4_pc_normal.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.4_pc_normal.inst.cfg index f9be12da3a..2d53790fe7 100644 --- a/resources/quality/cartesio/pc/cartesio_0.4_pc_normal.inst.cfg +++ b/resources/quality/cartesio/pc/cartesio_0.4_pc_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pc_175_cartesio_0.4_mm weight = 2 -setting_version = 4 +material = generic_pc +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pc/cartesio_0.8_pc_coarse.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.8_pc_coarse.inst.cfg index 597187437b..5d807c5d65 100644 --- a/resources/quality/cartesio/pc/cartesio_0.8_pc_coarse.inst.cfg +++ b/resources/quality/cartesio/pc/cartesio_0.8_pc_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = coarse -material = generic_pc_175_cartesio_0.8_mm weight = 3 -setting_version = 4 +material = generic_pc +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pc/cartesio_0.8_pc_extra_coarse.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.8_pc_extra_coarse.inst.cfg index 6d1fa196ec..75c72a1f56 100644 --- a/resources/quality/cartesio/pc/cartesio_0.8_pc_extra_coarse.inst.cfg +++ b/resources/quality/cartesio/pc/cartesio_0.8_pc_extra_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Extra Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = extra coarse -material = generic_pc_175_cartesio_0.8_mm weight = 4 -setting_version = 4 +material = generic_pc +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pc/cartesio_0.8_pc_high.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.8_pc_high.inst.cfg index c570b65350..0b1469fde4 100644 --- a/resources/quality/cartesio/pc/cartesio_0.8_pc_high.inst.cfg +++ b/resources/quality/cartesio/pc/cartesio_0.8_pc_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pc_175_cartesio_0.8_mm weight = 1 -setting_version = 4 +material = generic_pc +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pc/cartesio_0.8_pc_normal.inst.cfg b/resources/quality/cartesio/pc/cartesio_0.8_pc_normal.inst.cfg index 0d73b24197..7842a91f61 100644 --- a/resources/quality/cartesio/pc/cartesio_0.8_pc_normal.inst.cfg +++ b/resources/quality/cartesio/pc/cartesio_0.8_pc_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pc_175_cartesio_0.8_mm weight = 2 -setting_version = 4 +material = generic_pc +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/petg/cartesio_0.25_petg_high.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.25_petg_high.inst.cfg index c5c4be6f4a..5688828343 100644 --- a/resources/quality/cartesio/petg/cartesio_0.25_petg_high.inst.cfg +++ b/resources/quality/cartesio/petg/cartesio_0.25_petg_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_petg_175_cartesio_0.25_mm weight = 1 -setting_version = 4 +material = generic_petg +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/petg/cartesio_0.25_petg_normal.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.25_petg_normal.inst.cfg index 6d12bdc402..e47b9849ad 100644 --- a/resources/quality/cartesio/petg/cartesio_0.25_petg_normal.inst.cfg +++ b/resources/quality/cartesio/petg/cartesio_0.25_petg_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_petg_175_cartesio_0.25_mm weight = 2 -setting_version = 4 +material = generic_petg +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/petg/cartesio_0.4_petg_high.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.4_petg_high.inst.cfg index 43dda5007c..eb0cc83a63 100644 --- a/resources/quality/cartesio/petg/cartesio_0.4_petg_high.inst.cfg +++ b/resources/quality/cartesio/petg/cartesio_0.4_petg_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_petg_175_cartesio_0.4_mm weight = 1 -setting_version = 4 +material = generic_petg +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/petg/cartesio_0.4_petg_normal.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.4_petg_normal.inst.cfg index 094dc33263..5b2e8bb687 100644 --- a/resources/quality/cartesio/petg/cartesio_0.4_petg_normal.inst.cfg +++ b/resources/quality/cartesio/petg/cartesio_0.4_petg_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_petg_175_cartesio_0.4_mm weight = 2 -setting_version = 4 +material = generic_petg +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/petg/cartesio_0.8_petg_coarse.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.8_petg_coarse.inst.cfg index da9e4ad3dd..c65551c56c 100644 --- a/resources/quality/cartesio/petg/cartesio_0.8_petg_coarse.inst.cfg +++ b/resources/quality/cartesio/petg/cartesio_0.8_petg_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = coarse -material = generic_petg_175_cartesio_0.8_mm weight = 3 -setting_version = 4 +material = generic_petg +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/petg/cartesio_0.8_petg_extra_coarse.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.8_petg_extra_coarse.inst.cfg index 607ba778a1..52099fc789 100644 --- a/resources/quality/cartesio/petg/cartesio_0.8_petg_extra_coarse.inst.cfg +++ b/resources/quality/cartesio/petg/cartesio_0.8_petg_extra_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Extra Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = extra coarse -material = generic_petg_175_cartesio_0.8_mm weight = 4 -setting_version = 4 +material = generic_petg +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/petg/cartesio_0.8_petg_high.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.8_petg_high.inst.cfg index 3010d95dab..d6932f9c07 100644 --- a/resources/quality/cartesio/petg/cartesio_0.8_petg_high.inst.cfg +++ b/resources/quality/cartesio/petg/cartesio_0.8_petg_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_petg_175_cartesio_0.8_mm weight = 1 -setting_version = 4 +material = generic_petg +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 50 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/petg/cartesio_0.8_petg_normal.inst.cfg b/resources/quality/cartesio/petg/cartesio_0.8_petg_normal.inst.cfg index fbf8fac67f..6289073085 100644 --- a/resources/quality/cartesio/petg/cartesio_0.8_petg_normal.inst.cfg +++ b/resources/quality/cartesio/petg/cartesio_0.8_petg_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_petg_175_cartesio_0.8_mm weight = 2 -setting_version = 4 +material = generic_petg +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/pla/cartesio_0.25_pla_high.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.25_pla_high.inst.cfg index 9d8130602e..8b614f5bef 100644 --- a/resources/quality/cartesio/pla/cartesio_0.25_pla_high.inst.cfg +++ b/resources/quality/cartesio/pla/cartesio_0.25_pla_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pla_175_cartesio_0.25_mm weight = 1 -setting_version = 4 +material = generic_pla +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pla/cartesio_0.25_pla_normal.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.25_pla_normal.inst.cfg index 98401dbf42..56ea324826 100644 --- a/resources/quality/cartesio/pla/cartesio_0.25_pla_normal.inst.cfg +++ b/resources/quality/cartesio/pla/cartesio_0.25_pla_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pla_175_cartesio_0.25_mm weight = 0 -setting_version = 4 +material = generic_pla +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pla/cartesio_0.4_pla_high.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.4_pla_high.inst.cfg index 2eda5103d7..e83d26581d 100644 --- a/resources/quality/cartesio/pla/cartesio_0.4_pla_high.inst.cfg +++ b/resources/quality/cartesio/pla/cartesio_0.4_pla_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pla_175_cartesio_0.4_mm weight = 1 -setting_version = 4 +material = generic_pla +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pla/cartesio_0.4_pla_normal.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.4_pla_normal.inst.cfg index f3d3820ff7..1c0b440904 100644 --- a/resources/quality/cartesio/pla/cartesio_0.4_pla_normal.inst.cfg +++ b/resources/quality/cartesio/pla/cartesio_0.4_pla_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pla_175_cartesio_0.4_mm weight = 0 -setting_version = 4 +material = generic_pla +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pla/cartesio_0.8_pla_coarse.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.8_pla_coarse.inst.cfg index d2cf708336..9a6a517a93 100644 --- a/resources/quality/cartesio/pla/cartesio_0.8_pla_coarse.inst.cfg +++ b/resources/quality/cartesio/pla/cartesio_0.8_pla_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = coarse -material = generic_pla_175_cartesio_0.8_mm weight = -3 -setting_version = 4 +material = generic_pla +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pla/cartesio_0.8_pla_extra_coarse.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.8_pla_extra_coarse.inst.cfg index 888d8f91a7..17ef04e0c0 100644 --- a/resources/quality/cartesio/pla/cartesio_0.8_pla_extra_coarse.inst.cfg +++ b/resources/quality/cartesio/pla/cartesio_0.8_pla_extra_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Extra Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = extra coarse -material = generic_pla_175_cartesio_0.8_mm weight = -4 -setting_version = 4 +material = generic_pla +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pla/cartesio_0.8_pla_high.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.8_pla_high.inst.cfg index 558514db98..6a4b88788a 100644 --- a/resources/quality/cartesio/pla/cartesio_0.8_pla_high.inst.cfg +++ b/resources/quality/cartesio/pla/cartesio_0.8_pla_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pla_175_cartesio_0.8_mm weight = 1 -setting_version = 4 +material = generic_pla +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pla/cartesio_0.8_pla_normal.inst.cfg b/resources/quality/cartesio/pla/cartesio_0.8_pla_normal.inst.cfg index 9c508e4a1f..515e473bb0 100644 --- a/resources/quality/cartesio/pla/cartesio_0.8_pla_normal.inst.cfg +++ b/resources/quality/cartesio/pla/cartesio_0.8_pla_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pla_175_cartesio_0.8_mm weight = 0 -setting_version = 4 +material = generic_pla +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 10 diff --git a/resources/quality/cartesio/pva/cartesio_0.25_pva_high.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.25_pva_high.inst.cfg index fcbf4913de..dfbde35b9c 100644 --- a/resources/quality/cartesio/pva/cartesio_0.25_pva_high.inst.cfg +++ b/resources/quality/cartesio/pva/cartesio_0.25_pva_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pva_175_cartesio_0.25_mm weight = 1 -setting_version = 4 +material = generic_pva +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/pva/cartesio_0.25_pva_normal.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.25_pva_normal.inst.cfg index 3893421df0..ed1fa07207 100644 --- a/resources/quality/cartesio/pva/cartesio_0.25_pva_normal.inst.cfg +++ b/resources/quality/cartesio/pva/cartesio_0.25_pva_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pva_175_cartesio_0.25_mm weight = 2 -setting_version = 4 +material = generic_pva +variant = 0.25 mm [values] infill_line_width = 0.3 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/pva/cartesio_0.4_pva_high.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.4_pva_high.inst.cfg index 5876db1e2e..a2c4a21674 100644 --- a/resources/quality/cartesio/pva/cartesio_0.4_pva_high.inst.cfg +++ b/resources/quality/cartesio/pva/cartesio_0.4_pva_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pva_175_cartesio_0.4_mm weight = 1 -setting_version = 4 +material = generic_pva +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/pva/cartesio_0.4_pva_normal.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.4_pva_normal.inst.cfg index c977e79a5c..91164306fb 100644 --- a/resources/quality/cartesio/pva/cartesio_0.4_pva_normal.inst.cfg +++ b/resources/quality/cartesio/pva/cartesio_0.4_pva_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pva_175_cartesio_0.4_mm weight = 2 -setting_version = 4 +material = generic_pva +variant = 0.4 mm [values] infill_line_width = 0.5 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/pva/cartesio_0.8_pva_coarse.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.8_pva_coarse.inst.cfg index 8c36d8e7ed..003f980901 100644 --- a/resources/quality/cartesio/pva/cartesio_0.8_pva_coarse.inst.cfg +++ b/resources/quality/cartesio/pva/cartesio_0.8_pva_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = coarse -material = generic_pva_175_cartesio_0.8_mm weight = 3 -setting_version = 4 +material = generic_pva +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/pva/cartesio_0.8_pva_extra_coarse.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.8_pva_extra_coarse.inst.cfg index c2b19868f6..c328442ee8 100644 --- a/resources/quality/cartesio/pva/cartesio_0.8_pva_extra_coarse.inst.cfg +++ b/resources/quality/cartesio/pva/cartesio_0.8_pva_extra_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Extra Coarse definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = extra coarse -material = generic_pva_175_cartesio_0.8_mm weight = 4 -setting_version = 4 +material = generic_pva +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/pva/cartesio_0.8_pva_high.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.8_pva_high.inst.cfg index 5bd285285a..4830d5bcc9 100644 --- a/resources/quality/cartesio/pva/cartesio_0.8_pva_high.inst.cfg +++ b/resources/quality/cartesio/pva/cartesio_0.8_pva_high.inst.cfg @@ -4,11 +4,12 @@ name = High definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pva_175_cartesio_0.8_mm weight = 1 -setting_version = 4 +material = generic_pva +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/cartesio/pva/cartesio_0.8_pva_normal.inst.cfg b/resources/quality/cartesio/pva/cartesio_0.8_pva_normal.inst.cfg index a11bff95e1..f739f1668b 100644 --- a/resources/quality/cartesio/pva/cartesio_0.8_pva_normal.inst.cfg +++ b/resources/quality/cartesio/pva/cartesio_0.8_pva_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = cartesio [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pva_175_cartesio_0.8_mm weight = 2 -setting_version = 4 +material = generic_pva +variant = 0.8 mm [values] infill_line_width = 0.9 @@ -23,7 +24,7 @@ infill_sparse_density = 40 infill_pattern = grid material_print_temperature_layer_0 = =material_print_temperature + 5 -material_initial_print_temperature = =material_print_temperature +material_initial_print_temperature = =material_print_temperature_layer_0 + 5 material_final_print_temperature = =material_print_temperature retraction_min_travel = =round(line_width * 10) retraction_prime_speed = 8 diff --git a/resources/quality/coarse.inst.cfg b/resources/quality/coarse.inst.cfg index 133ffc8951..1accd77807 100644 --- a/resources/quality/coarse.inst.cfg +++ b/resources/quality/coarse.inst.cfg @@ -4,11 +4,11 @@ name = Coarse Quality definition = fdmprinter [metadata] +setting_version = 4 type = quality quality_type = coarse -global_quality = True weight = -3 -setting_version = 4 +global_quality = True [values] layer_height = 0.4 diff --git a/resources/quality/deltacomb/deltacomb_abs_fast.inst.cfg b/resources/quality/deltacomb/deltacomb_abs_fast.inst.cfg index 43643b6b92..75774fc000 100644 --- a/resources/quality/deltacomb/deltacomb_abs_fast.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_abs_fast.inst.cfg @@ -4,11 +4,11 @@ definition = deltacomb name = Fast Quality (beta) [metadata] -type = quality setting_version = 4 -material = generic_abs_175 +type = quality quality_type = fast weight = -1 +material = generic_abs [values] adhesion_type = raft @@ -22,4 +22,3 @@ cool_fan_speed_min = 50 cool_min_layer_time = 3 cool_min_speed = 20 material_bed_temperature = 80 - diff --git a/resources/quality/deltacomb/deltacomb_abs_high.inst.cfg b/resources/quality/deltacomb/deltacomb_abs_high.inst.cfg index 99e47bc9cb..65542f114a 100644 --- a/resources/quality/deltacomb/deltacomb_abs_high.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_abs_high.inst.cfg @@ -4,11 +4,11 @@ definition = deltacomb name = High Quality (beta) [metadata] -type = quality setting_version = 4 -material = generic_abs_175 +type = quality quality_type = high weight = 1 +material = generic_abs [values] adhesion_type = raft @@ -22,4 +22,3 @@ cool_fan_speed_min = 50 cool_min_layer_time = 3 cool_min_speed = 20 material_bed_temperature = 80 - diff --git a/resources/quality/deltacomb/deltacomb_abs_normal.inst.cfg b/resources/quality/deltacomb/deltacomb_abs_normal.inst.cfg index a2aa2be769..55248345fa 100644 --- a/resources/quality/deltacomb/deltacomb_abs_normal.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_abs_normal.inst.cfg @@ -4,11 +4,11 @@ definition = deltacomb name = Normal Quality (beta) [metadata] -type = quality setting_version = 4 -material = generic_abs_175 +type = quality quality_type = normal weight = 0 +material = generic_abs [values] adhesion_type = raft diff --git a/resources/quality/deltacomb/deltacomb_nylon_fast.inst.cfg b/resources/quality/deltacomb/deltacomb_nylon_fast.inst.cfg index fac23939cf..5986c65872 100644 --- a/resources/quality/deltacomb/deltacomb_nylon_fast.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_nylon_fast.inst.cfg @@ -4,11 +4,11 @@ name = Fast Quality (beta) definition = deltacomb [metadata] +setting_version = 4 type = quality -material = generic_nylon_175 quality_type = fast weight = -1 -setting_version = 4 +material = generic_nylon [values] adhesion_type = raft diff --git a/resources/quality/deltacomb/deltacomb_nylon_high.inst.cfg b/resources/quality/deltacomb/deltacomb_nylon_high.inst.cfg index d594126474..158f903bab 100644 --- a/resources/quality/deltacomb/deltacomb_nylon_high.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_nylon_high.inst.cfg @@ -4,11 +4,11 @@ name = High Quality (beta) definition = deltacomb [metadata] +setting_version = 4 type = quality -material = generic_nylon_175 quality_type = high weight = 1 -setting_version = 4 +material = generic_nylon [values] adhesion_type = raft diff --git a/resources/quality/deltacomb/deltacomb_nylon_normal.inst.cfg b/resources/quality/deltacomb/deltacomb_nylon_normal.inst.cfg index 76716fc16d..89024f30b7 100644 --- a/resources/quality/deltacomb/deltacomb_nylon_normal.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_nylon_normal.inst.cfg @@ -4,11 +4,11 @@ name = Normal Quality (beta) definition = deltacomb [metadata] +setting_version = 4 type = quality -material = generic_nylon_175 quality_type = normal weight = 0 -setting_version = 4 +material = generic_nylon [values] adhesion_type = raft @@ -55,4 +55,3 @@ support_z_distance = 0.15 top_bottom_thickness = 0.8 wall_thickness = 0.8 z_seam_type = random - diff --git a/resources/quality/deltacomb/deltacomb_pla_fast.inst.cfg b/resources/quality/deltacomb/deltacomb_pla_fast.inst.cfg index 9783cb11cc..98a5578d89 100644 --- a/resources/quality/deltacomb/deltacomb_pla_fast.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_pla_fast.inst.cfg @@ -4,11 +4,11 @@ definition = deltacomb name = Fast Quality [metadata] -type = quality setting_version = 4 -material = generic_pla_175 +type = quality quality_type = fast weight = -1 +material = generic_pla [values] adhesion_type = skirt @@ -21,4 +21,3 @@ cool_fan_speed_max = 100 cool_fan_speed_min = 100 cool_min_layer_time = 5 cool_min_speed = 20 - diff --git a/resources/quality/deltacomb/deltacomb_pla_high.inst.cfg b/resources/quality/deltacomb/deltacomb_pla_high.inst.cfg index 9513e98b6a..554312ce7b 100644 --- a/resources/quality/deltacomb/deltacomb_pla_high.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_pla_high.inst.cfg @@ -4,11 +4,11 @@ definition = deltacomb name = High Quality [metadata] -type = quality setting_version = 4 -material = generic_pla_175 +type = quality quality_type = high weight = 1 +material = generic_pla [values] adhesion_type = skirt @@ -22,4 +22,3 @@ cool_fan_speed_min = 100 cool_min_layer_time = 5 cool_min_speed = 20 material_print_temperature_layer_0 = =default_material_print_temperature + 5 - diff --git a/resources/quality/deltacomb/deltacomb_pla_normal.inst.cfg b/resources/quality/deltacomb/deltacomb_pla_normal.inst.cfg index d88f5909f0..3f22aa1200 100644 --- a/resources/quality/deltacomb/deltacomb_pla_normal.inst.cfg +++ b/resources/quality/deltacomb/deltacomb_pla_normal.inst.cfg @@ -4,11 +4,11 @@ definition = deltacomb name = Normal Quality [metadata] -type = quality setting_version = 4 -material = generic_pla_175 +type = quality quality_type = normal weight = 0 +material = generic_pla [values] adhesion_type = skirt diff --git a/resources/quality/draft.inst.cfg b/resources/quality/draft.inst.cfg index a155c8f2e1..2b375878b6 100644 --- a/resources/quality/draft.inst.cfg +++ b/resources/quality/draft.inst.cfg @@ -1,15 +1,14 @@ - [general] version = 2 name = Draft Quality definition = fdmprinter [metadata] +setting_version = 4 type = quality quality_type = draft -global_quality = True weight = -2 -setting_version = 4 +global_quality = True [values] layer_height = 0.2 diff --git a/resources/quality/extra_coarse.inst.cfg b/resources/quality/extra_coarse.inst.cfg index ce28e54721..bc8257a97f 100644 --- a/resources/quality/extra_coarse.inst.cfg +++ b/resources/quality/extra_coarse.inst.cfg @@ -4,11 +4,11 @@ name = Extra Coarse Quality definition = fdmprinter [metadata] -type = quality -quality_type = Extra coarse -global_quality = True -weight = -4 setting_version = 4 +type = quality +quality_type = extra coarse +weight = -4 +global_quality = True [values] layer_height = 0.6 diff --git a/resources/quality/fabtotum/fabtotum_abs_fast.inst.cfg b/resources/quality/fabtotum/fabtotum_abs_fast.inst.cfg index 245997a27e..54ad42537e 100644 --- a/resources/quality/fabtotum/fabtotum_abs_fast.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_abs_fast.inst.cfg @@ -4,21 +4,21 @@ definition = fabtotum name = Fast Quality [metadata] -type = quality setting_version = 4 -material = fabtotum_abs +type = quality quality_type = fast weight = -1 +material = fabtotum_abs [values] adhesion_type = raft +speed_print = 80 layer_height = 0.2 layer_height_0 = 0.2 -cool_fan_enabled = True +cool_fan_enabled = False cool_fan_full_at_height = 0.4 cool_fan_speed = 50 cool_fan_speed_max = 50 cool_fan_speed_min = 50 cool_min_layer_time = 3 cool_min_speed = 20 - diff --git a/resources/quality/fabtotum/fabtotum_abs_high.inst.cfg b/resources/quality/fabtotum/fabtotum_abs_high.inst.cfg index 26300eec7d..a7a4e71709 100644 --- a/resources/quality/fabtotum/fabtotum_abs_high.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_abs_high.inst.cfg @@ -4,21 +4,21 @@ definition = fabtotum name = High Quality [metadata] -type = quality setting_version = 4 -material = fabtotum_abs +type = quality quality_type = high weight = 1 +material = fabtotum_abs [values] adhesion_type = raft +speed_print = 45 layer_height = 0.1 layer_height_0 = 0.1 -cool_fan_enabled = True +cool_fan_enabled = False cool_fan_full_at_height = 0.2 cool_fan_speed = 50 cool_fan_speed_max = 50 cool_fan_speed_min = 50 cool_min_layer_time = 3 cool_min_speed = 20 - diff --git a/resources/quality/fabtotum/fabtotum_abs_normal.inst.cfg b/resources/quality/fabtotum/fabtotum_abs_normal.inst.cfg index 53d20c8cbc..19d6062dfa 100644 --- a/resources/quality/fabtotum/fabtotum_abs_normal.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_abs_normal.inst.cfg @@ -4,21 +4,21 @@ definition = fabtotum name = Normal Quality [metadata] -type = quality setting_version = 4 -material = fabtotum_abs +type = quality quality_type = normal weight = 0 +material = fabtotum_abs [values] adhesion_type = raft +speed_print = 60 layer_height = 0.15 layer_height_0 = 0.15 -cool_fan_enabled = True +cool_fan_enabled = False cool_fan_full_at_height = 0.3 cool_fan_speed = 50 cool_fan_speed_max = 50 cool_fan_speed_min = 50 cool_min_layer_time = 3 cool_min_speed = 20 - diff --git a/resources/quality/fabtotum/fabtotum_nylon_fast.inst.cfg b/resources/quality/fabtotum/fabtotum_nylon_fast.inst.cfg index 22bbcbeaeb..1983191e90 100644 --- a/resources/quality/fabtotum/fabtotum_nylon_fast.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_nylon_fast.inst.cfg @@ -4,11 +4,11 @@ name = Fast Quality definition = fabtotum [metadata] +setting_version = 4 type = quality -material = fabtotum_nylon quality_type = fast weight = -1 -setting_version = 4 +material = fabtotum_nylon [values] adhesion_type = raft @@ -44,7 +44,7 @@ skirt_gap = 1.5 skirt_line_count = 5 speed_infill = =speed_print speed_layer_0 = 25 -speed_print = 50 +speed_print = 30 speed_topbottom = 40 speed_travel = 200 speed_wall_0 = 40 @@ -54,4 +54,4 @@ support_type = buildplate support_z_distance = 0.15 top_bottom_thickness = 0.8 wall_thickness = 0.8 -z_seam_type = random \ No newline at end of file +z_seam_type = random diff --git a/resources/quality/fabtotum/fabtotum_nylon_high.inst.cfg b/resources/quality/fabtotum/fabtotum_nylon_high.inst.cfg index a625bd715f..5f81c12f22 100644 --- a/resources/quality/fabtotum/fabtotum_nylon_high.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_nylon_high.inst.cfg @@ -4,11 +4,11 @@ name = High Quality definition = fabtotum [metadata] +setting_version = 4 type = quality -material = fabtotum_nylon quality_type = high weight = 1 -setting_version = 4 +material = fabtotum_nylon [values] adhesion_type = raft @@ -44,7 +44,7 @@ skirt_gap = 1.5 skirt_line_count = 5 speed_infill = =speed_print speed_layer_0 = 25 -speed_print = 50 +speed_print = 30 speed_topbottom = 40 speed_travel = 200 speed_wall_0 = 40 @@ -54,4 +54,4 @@ support_type = buildplate support_z_distance = 0.15 top_bottom_thickness = 0.8 wall_thickness = 0.8 -z_seam_type = random \ No newline at end of file +z_seam_type = random diff --git a/resources/quality/fabtotum/fabtotum_nylon_normal.inst.cfg b/resources/quality/fabtotum/fabtotum_nylon_normal.inst.cfg index b05d30c5c6..834d9b8006 100644 --- a/resources/quality/fabtotum/fabtotum_nylon_normal.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_nylon_normal.inst.cfg @@ -4,11 +4,11 @@ name = Normal Quality definition = fabtotum [metadata] +setting_version = 4 type = quality -material = fabtotum_nylon quality_type = normal weight = 0 -setting_version = 4 +material = fabtotum_nylon [values] adhesion_type = raft @@ -44,7 +44,7 @@ skirt_gap = 1.5 skirt_line_count = 5 speed_infill = =speed_print speed_layer_0 = 25 -speed_print = 50 +speed_print = 30 speed_topbottom = 40 speed_travel = 200 speed_wall_0 = 40 @@ -55,4 +55,3 @@ support_z_distance = 0.15 top_bottom_thickness = 0.8 wall_thickness = 0.8 z_seam_type = random - diff --git a/resources/quality/fabtotum/fabtotum_pla_fast.inst.cfg b/resources/quality/fabtotum/fabtotum_pla_fast.inst.cfg index 1f1c93961b..2f123bc05b 100644 --- a/resources/quality/fabtotum/fabtotum_pla_fast.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_pla_fast.inst.cfg @@ -4,14 +4,15 @@ definition = fabtotum name = Fast Quality [metadata] -type = quality setting_version = 4 -material = fabtotum_pla +type = quality quality_type = fast weight = -1 +material = fabtotum_pla [values] adhesion_type = skirt +speed_print = 80 layer_height = 0.2 layer_height_0 = 0.2 cool_fan_enabled = True @@ -21,4 +22,3 @@ cool_fan_speed_max = 100 cool_fan_speed_min = 100 cool_min_layer_time = 5 cool_min_speed = 20 - diff --git a/resources/quality/fabtotum/fabtotum_pla_high.inst.cfg b/resources/quality/fabtotum/fabtotum_pla_high.inst.cfg index 9cd067703c..4b3aff15d9 100644 --- a/resources/quality/fabtotum/fabtotum_pla_high.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_pla_high.inst.cfg @@ -4,14 +4,15 @@ definition = fabtotum name = High Quality [metadata] -type = quality setting_version = 4 -material = fabtotum_pla +type = quality quality_type = high weight = 1 +material = fabtotum_pla [values] adhesion_type = skirt +speed_print = 45 layer_height = 0.1 layer_height_0 = 0.1 cool_fan_enabled = True @@ -21,4 +22,3 @@ cool_fan_speed_max = 100 cool_fan_speed_min = 100 cool_min_layer_time = 5 cool_min_speed = 20 - diff --git a/resources/quality/fabtotum/fabtotum_pla_normal.inst.cfg b/resources/quality/fabtotum/fabtotum_pla_normal.inst.cfg index 5b5125c4e5..44ddbcb085 100644 --- a/resources/quality/fabtotum/fabtotum_pla_normal.inst.cfg +++ b/resources/quality/fabtotum/fabtotum_pla_normal.inst.cfg @@ -4,14 +4,15 @@ definition = fabtotum name = Normal Quality [metadata] -type = quality setting_version = 4 -material = fabtotum_pla +type = quality quality_type = normal weight = 0 +material = fabtotum_pla [values] adhesion_type = skirt +speed_print = 60 layer_height = 0.15 layer_height_0 = 0.15 cool_fan_enabled = True @@ -21,4 +22,3 @@ cool_fan_speed_max = 100 cool_fan_speed_min = 100 cool_min_layer_time = 5 cool_min_speed = 20 - diff --git a/resources/quality/fabtotum/fabtotum_tpu_fast.inst.cfg b/resources/quality/fabtotum/fabtotum_tpu_fast.inst.cfg new file mode 100644 index 0000000000..d8ee095d61 --- /dev/null +++ b/resources/quality/fabtotum/fabtotum_tpu_fast.inst.cfg @@ -0,0 +1,25 @@ +[general] +version = 2 +definition = fabtotum +name = Fast Quality + +[metadata] +type = quality +setting_version = 4 +material = fabtotum_tpu +quality_type = fast +weight = -1 + +[values] +adhesion_type = skirt +speed_print = 80 +layer_height = 0.2 +layer_height_0 = 0.2 +cool_fan_enabled = True +cool_fan_full_at_height = 0.4 +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_fan_speed_min = 100 +cool_min_layer_time = 5 +cool_min_speed = 20 + diff --git a/resources/quality/fabtotum/fabtotum_tpu_high.inst.cfg b/resources/quality/fabtotum/fabtotum_tpu_high.inst.cfg new file mode 100644 index 0000000000..315a56015d --- /dev/null +++ b/resources/quality/fabtotum/fabtotum_tpu_high.inst.cfg @@ -0,0 +1,24 @@ +[general] +version = 2 +definition = fabtotum +name = High Quality + +[metadata] +type = quality +setting_version = 4 +material = fabtotum_tpu +quality_type = high +weight = 1 + +[values] +adhesion_type = skirt +layer_height = 0.1 +layer_height_0 = 0.1 +cool_fan_enabled = True +cool_fan_full_at_height = 0.2 +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_fan_speed_min = 100 +cool_min_layer_time = 5 +cool_min_speed = 20 + diff --git a/resources/quality/fabtotum/fabtotum_tpu_normal.inst.cfg b/resources/quality/fabtotum/fabtotum_tpu_normal.inst.cfg new file mode 100644 index 0000000000..3ce1592e70 --- /dev/null +++ b/resources/quality/fabtotum/fabtotum_tpu_normal.inst.cfg @@ -0,0 +1,25 @@ +[general] +version = 2 +definition = fabtotum +name = Normal Quality + +[metadata] +type = quality +setting_version = 4 +material = fabtotum_TPU +quality_type = normal +weight = 0 + +[values] +adhesion_type = skirt +speed_print = 80 +layer_height = 0.15 +layer_height_0 = 0.15 +cool_fan_enabled = True +cool_fan_full_at_height = 0.3 +cool_fan_speed = 100 +cool_fan_speed_max = 100 +cool_fan_speed_min = 100 +cool_min_layer_time = 5 +cool_min_speed = 20 + diff --git a/resources/quality/low.inst.cfg b/resources/quality/fast.inst.cfg similarity index 94% rename from resources/quality/low.inst.cfg rename to resources/quality/fast.inst.cfg index e92490722d..4b78cfcd75 100644 --- a/resources/quality/low.inst.cfg +++ b/resources/quality/fast.inst.cfg @@ -4,11 +4,11 @@ name = Low Quality definition = fdmprinter [metadata] -type = quality -quality_type = low -global_quality = True -weight = -1 setting_version = 4 +type = quality +quality_type = fast +weight = -1 +global_quality = True [values] infill_sparse_density = 10 diff --git a/resources/quality/gmax15plus/gmax15plus_pla_dual_normal.inst.cfg b/resources/quality/gmax15plus/gmax15plus_pla_dual_normal.inst.cfg index 74d3d1c134..e08a6ff421 100644 --- a/resources/quality/gmax15plus/gmax15plus_pla_dual_normal.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_pla_dual_normal.inst.cfg @@ -4,11 +4,10 @@ name = gMax 1.5+ Dual Normal Layers definition = gmax15plus_dual [metadata] +setting_version = 4 type = quality quality_type = normal weight = -1 -setting_version = 4 -global_quality = True [values] layer_height = 0.2 diff --git a/resources/quality/gmax15plus/gmax15plus_pla_dual_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_pla_dual_thick.inst.cfg index 32191f36d8..86bfe2af6c 100644 --- a/resources/quality/gmax15plus/gmax15plus_pla_dual_thick.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_pla_dual_thick.inst.cfg @@ -4,11 +4,10 @@ name = gMax 1.5+ Dual Thick Layers definition = gmax15plus_dual [metadata] +setting_version = 4 type = quality quality_type = course weight = -2 -setting_version = 4 -global_quality = True [values] layer_height = 0.28 diff --git a/resources/quality/gmax15plus/gmax15plus_pla_dual_thin.inst.cfg b/resources/quality/gmax15plus/gmax15plus_pla_dual_thin.inst.cfg index 5906875a3a..0d19c6c9f0 100644 --- a/resources/quality/gmax15plus/gmax15plus_pla_dual_thin.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_pla_dual_thin.inst.cfg @@ -4,11 +4,10 @@ name = gMax 1.5+ Dual Thin Layers definition = gmax15plus_dual [metadata] +setting_version = 4 type = quality quality_type = high weight = 0 -setting_version = 4 -global_quality = True [values] layer_height = 0.16 diff --git a/resources/quality/gmax15plus/gmax15plus_pla_dual_very_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_pla_dual_very_thick.inst.cfg index a94a621a88..2b58120762 100644 --- a/resources/quality/gmax15plus/gmax15plus_pla_dual_very_thick.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_pla_dual_very_thick.inst.cfg @@ -4,11 +4,10 @@ name = gMax 1.5+ Dual Very Thick Layers definition = gmax15plus_dual [metadata] +setting_version = 4 type = quality quality_type = extra_course weight = -3 -setting_version = 4 -global_quality = True [values] layer_height = 0.32 diff --git a/resources/quality/gmax15plus/gmax15plus_pla_normal.inst.cfg b/resources/quality/gmax15plus/gmax15plus_pla_normal.inst.cfg index a6513cba80..70920b6f6a 100644 --- a/resources/quality/gmax15plus/gmax15plus_pla_normal.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_pla_normal.inst.cfg @@ -4,11 +4,10 @@ name = gMax 1.5+ Normal Layers definition = gmax15plus [metadata] +setting_version = 4 type = quality quality_type = normal weight = -1 -setting_version = 4 -global_quality = True [values] layer_height = 0.2 @@ -58,5 +57,3 @@ top_thickness = 1 bottom_layers = 2 wall_line_count = 2 z_seam_corner = z_seam_corner_none - - diff --git a/resources/quality/gmax15plus/gmax15plus_pla_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_pla_thick.inst.cfg index be0d99a413..0f1e8a3802 100644 --- a/resources/quality/gmax15plus/gmax15plus_pla_thick.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_pla_thick.inst.cfg @@ -4,11 +4,10 @@ name = gMax 1.5+ Thick Layers definition = gmax15plus [metadata] +setting_version = 4 type = quality quality_type = course weight = -2 -setting_version = 4 -global_quality = True [values] layer_height = 0.28 @@ -57,4 +56,4 @@ top_layers = 3 top_thickness = 1 bottom_layers = 2 wall_line_count = 2 -z_seam_corner = z_seam_corner_none \ No newline at end of file +z_seam_corner = z_seam_corner_none diff --git a/resources/quality/gmax15plus/gmax15plus_pla_thin.inst.cfg b/resources/quality/gmax15plus/gmax15plus_pla_thin.inst.cfg index 7069db6dd6..f548affc2c 100644 --- a/resources/quality/gmax15plus/gmax15plus_pla_thin.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_pla_thin.inst.cfg @@ -4,11 +4,10 @@ name = gMax 1.5+ Thin Layers definition = gmax15plus [metadata] +setting_version = 4 type = quality quality_type = high weight = 0 -setting_version = 4 -global_quality = True [values] layer_height = 0.16 @@ -57,4 +56,4 @@ top_layers = 5 top_thickness = 1 bottom_layers = 3 wall_line_count = 2 -z_seam_corner = z_seam_corner_none \ No newline at end of file +z_seam_corner = z_seam_corner_none diff --git a/resources/quality/gmax15plus/gmax15plus_pla_very_thick.inst.cfg b/resources/quality/gmax15plus/gmax15plus_pla_very_thick.inst.cfg index 88d03ee77f..5db77a70ea 100644 --- a/resources/quality/gmax15plus/gmax15plus_pla_very_thick.inst.cfg +++ b/resources/quality/gmax15plus/gmax15plus_pla_very_thick.inst.cfg @@ -4,11 +4,10 @@ name = gMax 1.5+ Very Thick Layers definition = gmax15plus [metadata] +setting_version = 4 type = quality quality_type = extra_course weight = -3 -setting_version = 4 -global_quality = True [values] layer_height = 0.32 @@ -56,4 +55,4 @@ top_layers = 3 top_thickness = 1 bottom_layers = 2 wall_line_count = 2 -z_seam_corner = z_seam_corner_none \ No newline at end of file +z_seam_corner = z_seam_corner_none diff --git a/resources/quality/high.inst.cfg b/resources/quality/high.inst.cfg index d4333c90da..9ef90181a3 100644 --- a/resources/quality/high.inst.cfg +++ b/resources/quality/high.inst.cfg @@ -4,11 +4,11 @@ name = Extra Fine definition = fdmprinter [metadata] +setting_version = 4 type = quality quality_type = high -global_quality = True weight = 1 -setting_version = 4 +global_quality = True [values] layer_height = 0.06 diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg index e36286c6ae..4d0493ae8b 100644 --- a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = imade3d_jellybox [metadata] -type = quality -material = generic_petg_imade3d_jellybox_0.4_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_petg +variant = 0.4 mm [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.3 -layer_height_0 = 0.3 line_width = 0.4 material_bed_temperature = 50 material_bed_temperature_layer_0 = 55 diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg index 3240bad98b..9251ae43b4 100644 --- a/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_petg_0.4_coarse_2-fans.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = imade3d_jellybox [metadata] -type = quality -material = generic_petg_imade3d_jellybox_0.4_mm_2-fans -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_petg +variant = 0.4 mm 2-fans [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.3 -layer_height_0 = 0.3 line_width = 0.4 material_bed_temperature = 50 material_bed_temperature_layer_0 = 55 diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg index 2790a5a742..a10a3bcf0a 100644 --- a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_petg_0.4_medium.inst.cfg @@ -4,11 +4,12 @@ name = Medium definition = imade3d_jellybox [metadata] -type = quality -material = generic_petg_imade3d_jellybox_0.4_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_petg +variant = 0.4 mm [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.2 -layer_height_0 = 0.3 line_width = 0.4 material_bed_temperature = 50 material_bed_temperature_layer_0 = 55 diff --git a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg index 14f141f0bf..b851c2e17c 100644 --- a/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_petg_0.4_medium_2-fans.inst.cfg @@ -4,11 +4,12 @@ name = Medium definition = imade3d_jellybox [metadata] -type = quality -material = generic_petg_imade3d_jellybox_0.4_mm_2-fans -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_petg +variant = 0.4 mm 2-fans [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.2 -layer_height_0 = 0.3 line_width = 0.4 material_bed_temperature = 50 material_bed_temperature_layer_0 = 55 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg index 842ec618e0..bc86119eb8 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = imade3d_jellybox [metadata] -type = quality -material = generic_pla_imade3d_jellybox_0.4_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_pla +variant = 0.4 mm [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.3 -layer_height_0 = 0.3 line_width = 0.4 material_flow = 90 meshfix_union_all = False diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg index 17e085d84d..c05927fad5 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_coarse_2-fans.inst.cfg @@ -4,11 +4,12 @@ name = Coarse definition = imade3d_jellybox [metadata] -type = quality -material = generic_pla_imade3d_jellybox_0.4_mm_2-fans -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_pla +variant = 0.4 mm 2-fans [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.3 -layer_height_0 = 0.3 line_width = 0.4 material_flow = 90 meshfix_union_all = False diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg index a4b44f47f6..1bec96f05c 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_fine.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = imade3d_jellybox [metadata] -type = quality -material = generic_pla_imade3d_jellybox_0.4_mm -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_pla +variant = 0.4 mm [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.1 -layer_height_0 = 0.3 line_width = 0.4 material_flow = 90 material_print_temperature = 205 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg index 962b3c9ad4..609662a149 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_fine_2-fans.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = imade3d_jellybox [metadata] -type = quality -material = generic_pla_imade3d_jellybox_0.4_mm_2-fans -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_pla +variant = 0.4 mm 2-fans [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.1 -layer_height_0 = 0.3 line_width = 0.4 material_flow = 90 material_print_temperature = 205 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg index 952b16ecf8..5249f2dc2b 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_medium.inst.cfg @@ -4,11 +4,12 @@ name = Medium definition = imade3d_jellybox [metadata] -type = quality -material = generic_pla_imade3d_jellybox_0.4_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pla +variant = 0.4 mm [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.2 -layer_height_0 = 0.3 line_width = 0.4 material_flow = 90 meshfix_union_all = False diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg index bd70d105a4..1534d3a6fb 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_medium_2-fans.inst.cfg @@ -4,11 +4,12 @@ name = Medium definition = imade3d_jellybox [metadata] -type = quality -material = generic_pla_imade3d_jellybox_0.4_mm_2-fans -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pla +variant = 0.4 mm 2-fans [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.2 -layer_height_0 = 0.3 line_width = 0.4 material_flow = 90 meshfix_union_all = False diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg index a9d0679612..1166bd70c9 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine.inst.cfg @@ -4,11 +4,12 @@ name = UltraFine definition = imade3d_jellybox [metadata] -type = quality -material = generic_pla_imade3d_jellybox_0.4_mm -weight = 2 -quality_type = ultrahigh setting_version = 4 +type = quality +quality_type = ultrahigh +weight = 2 +material = generic_pla +variant = 0.4 mm [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.05 -layer_height_0 = 0.3 line_width = 0.4 material_flow = 90 material_print_temperature = 202 diff --git a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg b/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg index 097e1fc76a..5b05c10604 100644 --- a/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg +++ b/resources/quality/imade3d_jellybox/generic_pla_0.4_ultrafine_2-fans.inst.cfg @@ -4,11 +4,12 @@ name = UltraFine definition = imade3d_jellybox [metadata] -type = quality -material = generic_pla_imade3d_jellybox_0.4_mm_2-fans -weight = 2 -quality_type = ultrahigh setting_version = 4 +type = quality +quality_type = ultrahigh +weight = 2 +material = generic_pla +variant = 0.4 mm 2-fans [values] adhesion_type = skirt @@ -26,8 +27,6 @@ infill_line_width = 0.6 infill_overlap = 15 infill_pattern = zigzag infill_sparse_density = 20 -layer_height = 0.05 -layer_height_0 = 0.3 line_width = 0.4 material_flow = 90 material_print_temperature = 202 diff --git a/resources/quality/imade3d_jellybox/imade3d_jellybox_coarse.inst.cfg b/resources/quality/imade3d_jellybox/imade3d_jellybox_coarse.inst.cfg new file mode 100644 index 0000000000..2e940ea646 --- /dev/null +++ b/resources/quality/imade3d_jellybox/imade3d_jellybox_coarse.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 2 +name = Coarse +definition = imade3d_jellybox + +[metadata] +setting_version = 4 +type = quality +quality_type = fast +weight = -1 +global_quality = True + +[values] +adhesion_type = skirt +layer_height = 0.3 +layer_height_0 = 0.3 diff --git a/resources/quality/imade3d_jellybox/imade3d_jellybox_fine.inst.cfg b/resources/quality/imade3d_jellybox/imade3d_jellybox_fine.inst.cfg new file mode 100644 index 0000000000..9979558963 --- /dev/null +++ b/resources/quality/imade3d_jellybox/imade3d_jellybox_fine.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 2 +name = Fine +definition = imade3d_jellybox + +[metadata] +setting_version = 4 +type = quality +quality_type = high +weight = 1 +global_quality = True + +[values] +adhesion_type = skirt +layer_height = 0.1 +layer_height_0 = 0.3 diff --git a/resources/quality/imade3d_jellybox/imade3d_jellybox_normal.inst.cfg b/resources/quality/imade3d_jellybox/imade3d_jellybox_normal.inst.cfg new file mode 100644 index 0000000000..0574099b63 --- /dev/null +++ b/resources/quality/imade3d_jellybox/imade3d_jellybox_normal.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 2 +name = Medium +definition = imade3d_jellybox + +[metadata] +setting_version = 4 +type = quality +quality_type = normal +weight = 0 +global_quality = True + +[values] +adhesion_type = skirt +layer_height = 0.2 +layer_height_0 = 0.3 diff --git a/resources/quality/imade3d_jellybox/imade3d_jellybox_ultrafine.inst.cfg b/resources/quality/imade3d_jellybox/imade3d_jellybox_ultrafine.inst.cfg new file mode 100644 index 0000000000..39344ce7f4 --- /dev/null +++ b/resources/quality/imade3d_jellybox/imade3d_jellybox_ultrafine.inst.cfg @@ -0,0 +1,16 @@ +[general] +version = 2 +name = UltraFine +definition = imade3d_jellybox + +[metadata] +setting_version = 4 +type = quality +quality_type = ultrahigh +weight = 2 +global_quality = True + +[values] +adhesion_type = skirt +layer_height = 0.05 +layer_height_0 = 0.3 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_draft.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_draft.inst.cfg index 5401ec7bd6..add07c797a 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_draft.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_draft.inst.cfg @@ -4,11 +4,11 @@ name = Draft definition = kemiq_q2_beta [metadata] +setting_version = 4 type = quality +quality_type = coarse weight = -3 material = generic_abs -quality_type = coarse -setting_version = 4 [values] layer_height = 0.35 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_extra_fine.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_extra_fine.inst.cfg index aea8fc9535..8d31e439e1 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_extra_fine.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_extra_fine.inst.cfg @@ -4,11 +4,11 @@ name = Extra Fine definition = kemiq_q2_beta [metadata] +setting_version = 4 type = quality +quality_type = high weight = 1 material = generic_abs -quality_type = high -setting_version = 4 [values] layer_height = 0.06 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_fine.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_fine.inst.cfg index 24adbd9f6c..936e9f8cd8 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_fine.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_fine.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = kemiq_q2_beta [metadata] +setting_version = 4 type = quality +quality_type = normal weight = 0 material = generic_abs -quality_type = normal -setting_version = 4 [values] layer_height = 0.1 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_low.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_low.inst.cfg index 98d2475633..8f48616dbf 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_low.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_low.inst.cfg @@ -4,11 +4,11 @@ name = Low definition = kemiq_q2_beta [metadata] +setting_version = 4 type = quality +quality_type = draft weight = -2 material = generic_abs -quality_type = draft -setting_version = 4 [values] layer_height = 0.2 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_normal.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_normal.inst.cfg index ab2e9dabbc..947fd0774d 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_abs_normal.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_abs_normal.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = kemiq_q2_beta [metadata] +setting_version = 4 type = quality +quality_type = fast weight = -1 material = generic_abs -quality_type = low -setting_version = 4 [values] layer_height = 0.15 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_pla_draft.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_pla_draft.inst.cfg index f868ab40fc..d9ea0e6850 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_pla_draft.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_pla_draft.inst.cfg @@ -4,11 +4,11 @@ name = Draft definition = kemiq_q2_beta [metadata] +setting_version = 4 type = quality +quality_type = coarse weight = -3 material = generic_pla -quality_type = coarse -setting_version = 4 [values] layer_height = 0.35 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_pla_extra_fine.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_pla_extra_fine.inst.cfg index e907f7ccaf..b1775b994f 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_pla_extra_fine.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_pla_extra_fine.inst.cfg @@ -4,11 +4,11 @@ name = Extra Fine definition = kemiq_q2_beta [metadata] -type = quality -material = generic_pla -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_pla [values] layer_height = 0.06 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_pla_fine.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_pla_fine.inst.cfg index 841023d532..cf7e070cb8 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_pla_fine.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_pla_fine.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = kemiq_q2_beta [metadata] +setting_version = 4 type = quality +quality_type = normal weight = 0 material = generic_pla -quality_type = normal -setting_version = 4 [values] layer_height = 0.1 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_pla_low.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_pla_low.inst.cfg index ca874c6bce..8b40fabb7b 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_pla_low.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_pla_low.inst.cfg @@ -4,11 +4,11 @@ name = Low definition = kemiq_q2_beta [metadata] +setting_version = 4 type = quality +quality_type = draft weight = -2 material = generic_pla -quality_type = draft -setting_version = 4 [values] layer_height = 0.2 diff --git a/resources/quality/kemiq_q2/kemiq_q2_beta_pla_normal.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_beta_pla_normal.inst.cfg index fcfbe72b24..cc7d877c70 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_beta_pla_normal.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_beta_pla_normal.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = kemiq_q2_beta [metadata] +setting_version = 4 type = quality +quality_type = fast weight = -1 material = generic_pla -quality_type = low -setting_version = 4 [values] layer_height = 0.15 diff --git a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_draft.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_draft.inst.cfg index 009af9b87b..fcda1b081e 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_draft.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_draft.inst.cfg @@ -4,11 +4,11 @@ name = Draft definition = kemiq_q2_gama [metadata] +setting_version = 4 type = quality +quality_type = coarse weight = -3 material = generic_pla -quality_type = coarse -setting_version = 4 [values] layer_height = 0.35 diff --git a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_extra_fine.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_extra_fine.inst.cfg index 447e3b012d..52e5e8df98 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_extra_fine.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_extra_fine.inst.cfg @@ -4,11 +4,11 @@ name = Extra Fine definition = kemiq_q2_gama [metadata] -type = quality -material = generic_pla -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_pla [values] layer_height = 0.06 diff --git a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_fine.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_fine.inst.cfg index 80b2375108..b3ea5b8967 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_fine.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_fine.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = kemiq_q2_gama [metadata] +setting_version = 4 type = quality +quality_type = normal weight = 0 material = generic_pla -quality_type = normal -setting_version = 4 [values] layer_height = 0.1 diff --git a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_low.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_low.inst.cfg index e30c52f4e6..08a3db0b1f 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_low.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_low.inst.cfg @@ -4,11 +4,11 @@ name = Low definition = kemiq_q2_gama [metadata] +setting_version = 4 type = quality +quality_type = draft weight = -2 material = generic_pla -quality_type = draft -setting_version = 4 [values] layer_height = 0.2 diff --git a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_normal.inst.cfg b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_normal.inst.cfg index 31bdaa51bc..a71c3c731b 100644 --- a/resources/quality/kemiq_q2/kemiq_q2_gama_pla_normal.inst.cfg +++ b/resources/quality/kemiq_q2/kemiq_q2_gama_pla_normal.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = kemiq_q2_gama [metadata] +setting_version = 4 type = quality +quality_type = fast weight = -1 material = generic_pla -quality_type = low -setting_version = 4 [values] layer_height = 0.15 diff --git a/resources/quality/malyan_m200/abs/malyan_m200_abs_draft.inst.cfg b/resources/quality/malyan_m200/abs/malyan_m200_abs_draft.inst.cfg index 19cc9fd00d..c02e789dfe 100644 --- a/resources/quality/malyan_m200/abs/malyan_m200_abs_draft.inst.cfg +++ b/resources/quality/malyan_m200/abs/malyan_m200_abs_draft.inst.cfg @@ -4,12 +4,12 @@ name = Fast definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_abs_175 weight = -2 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/malyan_m200/abs/malyan_m200_abs_fast.inst.cfg b/resources/quality/malyan_m200/abs/malyan_m200_abs_fast.inst.cfg index 5677a0d58d..7f4f368e06 100644 --- a/resources/quality/malyan_m200/abs/malyan_m200_abs_fast.inst.cfg +++ b/resources/quality/malyan_m200/abs/malyan_m200_abs_fast.inst.cfg @@ -4,12 +4,12 @@ name = Normal definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_abs_175 weight = -1 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/malyan_m200/abs/malyan_m200_abs_high.inst.cfg b/resources/quality/malyan_m200/abs/malyan_m200_abs_high.inst.cfg index 7798b3f545..37335b61ee 100644 --- a/resources/quality/malyan_m200/abs/malyan_m200_abs_high.inst.cfg +++ b/resources/quality/malyan_m200/abs/malyan_m200_abs_high.inst.cfg @@ -4,12 +4,12 @@ name = Finer definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_abs_175 weight = 1 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/malyan_m200/abs/malyan_m200_abs_normal.inst.cfg b/resources/quality/malyan_m200/abs/malyan_m200_abs_normal.inst.cfg index c87c66c813..138c31ab14 100644 --- a/resources/quality/malyan_m200/abs/malyan_m200_abs_normal.inst.cfg +++ b/resources/quality/malyan_m200/abs/malyan_m200_abs_normal.inst.cfg @@ -4,12 +4,12 @@ name = Fine definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_abs_175 weight = 0 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/malyan_m200/abs/malyan_m200_abs_superdraft.inst.cfg b/resources/quality/malyan_m200/abs/malyan_m200_abs_superdraft.inst.cfg index e6e3cfcd6c..2d748bd698 100644 --- a/resources/quality/malyan_m200/abs/malyan_m200_abs_superdraft.inst.cfg +++ b/resources/quality/malyan_m200/abs/malyan_m200_abs_superdraft.inst.cfg @@ -4,12 +4,12 @@ name = Lowest Quality Draft definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_abs_175 weight = -5 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/malyan_m200/abs/malyan_m200_abs_thickerdraft.inst.cfg b/resources/quality/malyan_m200/abs/malyan_m200_abs_thickerdraft.inst.cfg index fb08013809..ebf7798733 100644 --- a/resources/quality/malyan_m200/abs/malyan_m200_abs_thickerdraft.inst.cfg +++ b/resources/quality/malyan_m200/abs/malyan_m200_abs_thickerdraft.inst.cfg @@ -4,12 +4,12 @@ name = Draft definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = thickerdraft -material = generic_abs_175 weight = -3 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/malyan_m200/abs/malyan_m200_abs_ultra.inst.cfg b/resources/quality/malyan_m200/abs/malyan_m200_abs_ultra.inst.cfg index 385d852688..5be92914be 100644 --- a/resources/quality/malyan_m200/abs/malyan_m200_abs_ultra.inst.cfg +++ b/resources/quality/malyan_m200/abs/malyan_m200_abs_ultra.inst.cfg @@ -4,12 +4,12 @@ name = Ultra Fine definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = ultra -material = generic_abs_175 weight = 2 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/malyan_m200/abs/malyan_m200_abs_verydraft.inst.cfg b/resources/quality/malyan_m200/abs/malyan_m200_abs_verydraft.inst.cfg index 7026391fb6..bfe92a98e1 100644 --- a/resources/quality/malyan_m200/abs/malyan_m200_abs_verydraft.inst.cfg +++ b/resources/quality/malyan_m200/abs/malyan_m200_abs_verydraft.inst.cfg @@ -4,12 +4,12 @@ name = Low Detail Draft definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_abs_175 weight = -4 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/malyan_m200/malyan_m200_0.04375.inst.cfg b/resources/quality/malyan_m200/malyan_m200_0.04375.inst.cfg index 54be6ecbcc..89d7f2f2ec 100644 --- a/resources/quality/malyan_m200/malyan_m200_0.04375.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_0.04375.inst.cfg @@ -4,10 +4,10 @@ name = M1 Quality definition = malyan_m200 [metadata] -type = quality -weight = 2 -quality_type = fine setting_version = 4 +type = quality +quality_type = fine +weight = 2 [values] layer_height = 0.04375 diff --git a/resources/quality/malyan_m200/malyan_m200_0.0875.inst.cfg b/resources/quality/malyan_m200/malyan_m200_0.0875.inst.cfg index 568dd796f3..555b280c1c 100644 --- a/resources/quality/malyan_m200/malyan_m200_0.0875.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_0.0875.inst.cfg @@ -4,10 +4,10 @@ name = M2 Quality definition = malyan_m200 [metadata] -type = quality -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 [values] layer_height = 0.0875 diff --git a/resources/quality/malyan_m200/malyan_m200_0.13125.inst.cfg b/resources/quality/malyan_m200/malyan_m200_0.13125.inst.cfg index 1dc436502b..7829f33086 100644 --- a/resources/quality/malyan_m200/malyan_m200_0.13125.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_0.13125.inst.cfg @@ -4,10 +4,10 @@ name = M3 Quality definition = malyan_m200 [metadata] -type = quality -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 [values] layer_height = 0.13125 diff --git a/resources/quality/malyan_m200/malyan_m200_0.175.inst.cfg b/resources/quality/malyan_m200/malyan_m200_0.175.inst.cfg index 314a8acd83..e6fd4c9368 100644 --- a/resources/quality/malyan_m200/malyan_m200_0.175.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_0.175.inst.cfg @@ -4,11 +4,11 @@ name = M4 Quality definition = malyan_m200 [metadata] -type = quality -weight = -1 -quality_type = fast -global_quality = true setting_version = 4 +type = quality +quality_type = fast +weight = -1 +global_quality = true [values] layer_height = 0.175 diff --git a/resources/quality/malyan_m200/malyan_m200_0.21875.inst.cfg b/resources/quality/malyan_m200/malyan_m200_0.21875.inst.cfg index a7fedb7e04..143693dbc4 100644 --- a/resources/quality/malyan_m200/malyan_m200_0.21875.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_0.21875.inst.cfg @@ -4,10 +4,10 @@ name = M5 Quality definition = malyan_m200 [metadata] -type = quality -weight = -2 -quality_type = faster setting_version = 4 +type = quality +quality_type = faster +weight = -2 [values] layer_height = 0.21875 diff --git a/resources/quality/malyan_m200/malyan_m200_0.2625.inst.cfg b/resources/quality/malyan_m200/malyan_m200_0.2625.inst.cfg index 441abc3070..3dc33a81a0 100644 --- a/resources/quality/malyan_m200/malyan_m200_0.2625.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_0.2625.inst.cfg @@ -4,10 +4,10 @@ name = M6 Quality definition = malyan_m200 [metadata] -type = quality -weight = -3 -quality_type = draft setting_version = 4 +type = quality +quality_type = draft +weight = -3 [values] layer_height = 0.2625 diff --git a/resources/quality/malyan_m200/malyan_m200_0.30625.inst.cfg b/resources/quality/malyan_m200/malyan_m200_0.30625.inst.cfg index 2588838174..c7d6911a67 100644 --- a/resources/quality/malyan_m200/malyan_m200_0.30625.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_0.30625.inst.cfg @@ -4,10 +4,10 @@ name = M7 Quality definition = malyan_m200 [metadata] -type = quality -weight = -4 -quality_type = turbo setting_version = 4 +type = quality +quality_type = turbo +weight = -4 [values] layer_height = 0.30625 diff --git a/resources/quality/malyan_m200/malyan_m200_0.35.inst.cfg b/resources/quality/malyan_m200/malyan_m200_0.35.inst.cfg index 800b6104d9..5d14204a1e 100644 --- a/resources/quality/malyan_m200/malyan_m200_0.35.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_0.35.inst.cfg @@ -4,11 +4,11 @@ name = M8 Quality definition = malyan_m200 [metadata] -type = quality -weight = -5 -quality_type = hyper -global_quality = true setting_version = 4 +type = quality +quality_type = hyper +weight = -5 +global_quality = true [values] layer_height = 0.35 diff --git a/resources/quality/malyan_m200/malyan_m200_global_Draft_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_Draft_Quality.inst.cfg index d3104caa87..fd999cc6c7 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_Draft_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_Draft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Fast definition = malyan_m200 [metadata] -type = quality -weight = -2 -quality_type = draft -global_quality = True setting_version = 4 +type = quality +quality_type = draft +weight = -2 +global_quality = True [values] layer_height = 0.21875 diff --git a/resources/quality/malyan_m200/malyan_m200_global_Fast_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_Fast_Quality.inst.cfg index aec535bd71..8027a7b01a 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_Fast_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_Fast_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = malyan_m200 [metadata] -type = quality -weight = -1 -quality_type = fast -global_quality = True setting_version = 4 +type = quality +quality_type = fast +weight = -1 +global_quality = True [values] layer_height = 0.175 diff --git a/resources/quality/malyan_m200/malyan_m200_global_High_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_High_Quality.inst.cfg index ca202862a2..01fea67382 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_High_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Finer definition = malyan_m200 [metadata] -type = quality -weight = 1 -quality_type = high -global_quality = True setting_version = 4 +type = quality +quality_type = high +weight = 1 +global_quality = True [values] layer_height = 0.0875 diff --git a/resources/quality/malyan_m200/malyan_m200_global_Normal_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_Normal_Quality.inst.cfg index 7076718903..a705d187f1 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_Normal_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = malyan_m200 [metadata] -type = quality -weight = 0 -quality_type = normal -global_quality = True setting_version = 4 +type = quality +quality_type = normal +weight = 0 +global_quality = True [values] layer_height = 0.13125 diff --git a/resources/quality/malyan_m200/malyan_m200_global_SuperDraft_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_SuperDraft_Quality.inst.cfg index 7dfbdb5886..92f1eb2286 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_SuperDraft_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_SuperDraft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Lowest Quality Draft definition = malyan_m200 [metadata] -type = quality -weight = -5 -quality_type = superdraft -global_quality = True setting_version = 4 +type = quality +quality_type = superdraft +weight = -5 +global_quality = True [values] layer_height = 0.35 diff --git a/resources/quality/malyan_m200/malyan_m200_global_ThickerDraft_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_ThickerDraft_Quality.inst.cfg index 2fbf82b128..246443503e 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_ThickerDraft_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_ThickerDraft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Draft definition = malyan_m200 [metadata] -type = quality -weight = -3 -quality_type = thickerdraft -global_quality = True setting_version = 4 +type = quality +quality_type = thickerdraft +weight = -3 +global_quality = True [values] layer_height = 0.2625 diff --git a/resources/quality/malyan_m200/malyan_m200_global_Ultra_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_Ultra_Quality.inst.cfg index 90e589cca5..0bbe46be4e 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_Ultra_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_Ultra_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Ultra Fine definition = malyan_m200 [metadata] -type = quality -weight = 2 -quality_type = ultra -global_quality = True setting_version = 4 +type = quality +quality_type = ultra +weight = 2 +global_quality = True [values] layer_height = 0.04375 diff --git a/resources/quality/malyan_m200/malyan_m200_global_VeryDraft_Quality.inst.cfg b/resources/quality/malyan_m200/malyan_m200_global_VeryDraft_Quality.inst.cfg index 1210ee214b..5cc85b9bc8 100644 --- a/resources/quality/malyan_m200/malyan_m200_global_VeryDraft_Quality.inst.cfg +++ b/resources/quality/malyan_m200/malyan_m200_global_VeryDraft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Low Detail Draft definition = malyan_m200 [metadata] -type = quality -weight = -4 -quality_type = verydraft -global_quality = True setting_version = 4 +type = quality +quality_type = verydraft +weight = -4 +global_quality = True [values] layer_height = 0.30625 diff --git a/resources/quality/malyan_m200/petg/malyan_m200_petg_draft.inst.cfg b/resources/quality/malyan_m200/petg/malyan_m200_petg_draft.inst.cfg index aef83471ba..038af5eec0 100644 --- a/resources/quality/malyan_m200/petg/malyan_m200_petg_draft.inst.cfg +++ b/resources/quality/malyan_m200/petg/malyan_m200_petg_draft.inst.cfg @@ -4,8 +4,8 @@ name = Fast definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_petg_175 weight = -2 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/malyan_m200/petg/malyan_m200_petg_fast.inst.cfg b/resources/quality/malyan_m200/petg/malyan_m200_petg_fast.inst.cfg index 3c7fc2c239..df341d195c 100644 --- a/resources/quality/malyan_m200/petg/malyan_m200_petg_fast.inst.cfg +++ b/resources/quality/malyan_m200/petg/malyan_m200_petg_fast.inst.cfg @@ -4,8 +4,8 @@ name = Normal definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_petg_175 weight = -1 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/malyan_m200/petg/malyan_m200_petg_high.inst.cfg b/resources/quality/malyan_m200/petg/malyan_m200_petg_high.inst.cfg index eb1654eae3..ff9dbc8227 100644 --- a/resources/quality/malyan_m200/petg/malyan_m200_petg_high.inst.cfg +++ b/resources/quality/malyan_m200/petg/malyan_m200_petg_high.inst.cfg @@ -4,8 +4,8 @@ name = Finer definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_petg_175 weight = 1 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/malyan_m200/petg/malyan_m200_petg_normal.inst.cfg b/resources/quality/malyan_m200/petg/malyan_m200_petg_normal.inst.cfg index 53e60d2d62..8531bbf98b 100644 --- a/resources/quality/malyan_m200/petg/malyan_m200_petg_normal.inst.cfg +++ b/resources/quality/malyan_m200/petg/malyan_m200_petg_normal.inst.cfg @@ -4,8 +4,8 @@ name = Fine definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_petg_175 weight = 0 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/malyan_m200/petg/malyan_m200_petg_superdraft.inst.cfg b/resources/quality/malyan_m200/petg/malyan_m200_petg_superdraft.inst.cfg index d2a96386ae..8b065ecea8 100644 --- a/resources/quality/malyan_m200/petg/malyan_m200_petg_superdraft.inst.cfg +++ b/resources/quality/malyan_m200/petg/malyan_m200_petg_superdraft.inst.cfg @@ -4,8 +4,8 @@ name = Lowest Quality Draft definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_petg_175 weight = -5 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/malyan_m200/petg/malyan_m200_petg_thickerdraft.inst.cfg b/resources/quality/malyan_m200/petg/malyan_m200_petg_thickerdraft.inst.cfg index e2f37ae43b..97672ee1c7 100644 --- a/resources/quality/malyan_m200/petg/malyan_m200_petg_thickerdraft.inst.cfg +++ b/resources/quality/malyan_m200/petg/malyan_m200_petg_thickerdraft.inst.cfg @@ -4,8 +4,8 @@ name = Draft definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = thickerdraft -material = generic_petg_175 weight = -3 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/malyan_m200/petg/malyan_m200_petg_ultra.inst.cfg b/resources/quality/malyan_m200/petg/malyan_m200_petg_ultra.inst.cfg index 0fa89f2569..7b92f9d454 100644 --- a/resources/quality/malyan_m200/petg/malyan_m200_petg_ultra.inst.cfg +++ b/resources/quality/malyan_m200/petg/malyan_m200_petg_ultra.inst.cfg @@ -4,8 +4,8 @@ name = Ultra Fine definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = ultra -material = generic_petg_175 weight = 2 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/malyan_m200/petg/malyan_m200_petg_verydraft.inst.cfg b/resources/quality/malyan_m200/petg/malyan_m200_petg_verydraft.inst.cfg index 84bedf5c14..1a1b59d90f 100644 --- a/resources/quality/malyan_m200/petg/malyan_m200_petg_verydraft.inst.cfg +++ b/resources/quality/malyan_m200/petg/malyan_m200_petg_verydraft.inst.cfg @@ -4,8 +4,8 @@ name = Low Detail Draft definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_petg_175 weight = -4 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/malyan_m200/pla/malyan_m200_pla_draft.inst.cfg b/resources/quality/malyan_m200/pla/malyan_m200_pla_draft.inst.cfg index 4f221eceb7..f3ef39f009 100644 --- a/resources/quality/malyan_m200/pla/malyan_m200_pla_draft.inst.cfg +++ b/resources/quality/malyan_m200/pla/malyan_m200_pla_draft.inst.cfg @@ -4,12 +4,12 @@ name = Fast definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_pla_175 weight = -2 -setting_version = 4 +material = generic_pla [values] material_bed_temperature = 60 -material_bed_temperature_layer_0 = 60 \ No newline at end of file +material_bed_temperature_layer_0 = 60 diff --git a/resources/quality/malyan_m200/pla/malyan_m200_pla_fast.inst.cfg b/resources/quality/malyan_m200/pla/malyan_m200_pla_fast.inst.cfg index 3097fe055a..0e047b140e 100644 --- a/resources/quality/malyan_m200/pla/malyan_m200_pla_fast.inst.cfg +++ b/resources/quality/malyan_m200/pla/malyan_m200_pla_fast.inst.cfg @@ -4,12 +4,12 @@ name = Normal definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_pla_175 weight = -1 -setting_version = 4 +material = generic_pla [values] material_bed_temperature = 60 -material_bed_temperature_layer_0 = 60 \ No newline at end of file +material_bed_temperature_layer_0 = 60 diff --git a/resources/quality/malyan_m200/pla/malyan_m200_pla_high.inst.cfg b/resources/quality/malyan_m200/pla/malyan_m200_pla_high.inst.cfg index 062c120ad0..e68ad90c6c 100644 --- a/resources/quality/malyan_m200/pla/malyan_m200_pla_high.inst.cfg +++ b/resources/quality/malyan_m200/pla/malyan_m200_pla_high.inst.cfg @@ -4,12 +4,12 @@ name = Finer definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pla_175 weight = 1 -setting_version = 4 +material = generic_pla [values] material_bed_temperature = 60 -material_bed_temperature_layer_0 = 60 \ No newline at end of file +material_bed_temperature_layer_0 = 60 diff --git a/resources/quality/malyan_m200/pla/malyan_m200_pla_normal.inst.cfg b/resources/quality/malyan_m200/pla/malyan_m200_pla_normal.inst.cfg index e01141ed9e..78bdc826ba 100644 --- a/resources/quality/malyan_m200/pla/malyan_m200_pla_normal.inst.cfg +++ b/resources/quality/malyan_m200/pla/malyan_m200_pla_normal.inst.cfg @@ -4,12 +4,12 @@ name = Fine definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pla_175 weight = 0 -setting_version = 4 +material = generic_pla [values] material_bed_temperature = 60 -material_bed_temperature_layer_0 = 60 \ No newline at end of file +material_bed_temperature_layer_0 = 60 diff --git a/resources/quality/malyan_m200/pla/malyan_m200_pla_superdraft.inst.cfg b/resources/quality/malyan_m200/pla/malyan_m200_pla_superdraft.inst.cfg index 53eb4380eb..cc24c4a0b2 100644 --- a/resources/quality/malyan_m200/pla/malyan_m200_pla_superdraft.inst.cfg +++ b/resources/quality/malyan_m200/pla/malyan_m200_pla_superdraft.inst.cfg @@ -4,12 +4,12 @@ name = Lowest Quality Draft definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_pla_175 weight = -5 -setting_version = 4 +material = generic_pla [values] material_bed_temperature = 60 -material_bed_temperature_layer_0 = 60 \ No newline at end of file +material_bed_temperature_layer_0 = 60 diff --git a/resources/quality/malyan_m200/pla/malyan_m200_pla_thickerdraft.inst.cfg b/resources/quality/malyan_m200/pla/malyan_m200_pla_thickerdraft.inst.cfg index 32d2b419bc..5bfb82ee90 100644 --- a/resources/quality/malyan_m200/pla/malyan_m200_pla_thickerdraft.inst.cfg +++ b/resources/quality/malyan_m200/pla/malyan_m200_pla_thickerdraft.inst.cfg @@ -4,12 +4,12 @@ name = Draft definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = thickerdraft -material = generic_pla_175 weight = -3 -setting_version = 4 +material = generic_pla [values] material_bed_temperature = 60 -material_bed_temperature_layer_0 = 60 \ No newline at end of file +material_bed_temperature_layer_0 = 60 diff --git a/resources/quality/malyan_m200/pla/malyan_m200_pla_ultra.inst.cfg b/resources/quality/malyan_m200/pla/malyan_m200_pla_ultra.inst.cfg index 3865059254..d042fc7978 100644 --- a/resources/quality/malyan_m200/pla/malyan_m200_pla_ultra.inst.cfg +++ b/resources/quality/malyan_m200/pla/malyan_m200_pla_ultra.inst.cfg @@ -4,12 +4,12 @@ name = Ultra Fine definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = ultra -material = generic_pla_175 weight = 2 -setting_version = 4 +material = generic_pla [values] material_bed_temperature = 60 -material_bed_temperature_layer_0 = 60 \ No newline at end of file +material_bed_temperature_layer_0 = 60 diff --git a/resources/quality/malyan_m200/pla/malyan_m200_pla_verydraft.inst.cfg b/resources/quality/malyan_m200/pla/malyan_m200_pla_verydraft.inst.cfg index a624c056be..8e79071db4 100644 --- a/resources/quality/malyan_m200/pla/malyan_m200_pla_verydraft.inst.cfg +++ b/resources/quality/malyan_m200/pla/malyan_m200_pla_verydraft.inst.cfg @@ -4,12 +4,12 @@ name = Low Detail Draft definition = malyan_m200 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_pla_175 weight = -4 -setting_version = 4 +material = generic_pla [values] material_bed_temperature = 60 -material_bed_temperature_layer_0 = 60 \ No newline at end of file +material_bed_temperature_layer_0 = 60 diff --git a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_draft.inst.cfg b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_draft.inst.cfg index a63256573a..3387b51d7d 100644 --- a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_draft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_draft.inst.cfg @@ -4,12 +4,12 @@ name = Fast definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_abs_175 weight = -2 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_fast.inst.cfg b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_fast.inst.cfg index 49f4486596..da187c85ea 100644 --- a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_fast.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_fast.inst.cfg @@ -4,12 +4,12 @@ name = Normal definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_abs_175 weight = -1 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_high.inst.cfg b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_high.inst.cfg index eab16a8e2b..a2efa54353 100644 --- a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_high.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_high.inst.cfg @@ -4,12 +4,12 @@ name = Finer definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_abs_175 weight = 1 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_normal.inst.cfg b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_normal.inst.cfg index 03aeb4067b..a331a63aaf 100644 --- a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_normal.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_normal.inst.cfg @@ -4,12 +4,12 @@ name = Fine definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_abs_175 weight = 0 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_superdraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_superdraft.inst.cfg index 148f53ba73..d328e353ac 100644 --- a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_superdraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_superdraft.inst.cfg @@ -4,12 +4,12 @@ name = Lowest Quality Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_abs_175 weight = -5 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_thickerdraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_thickerdraft.inst.cfg index e2ad71a360..8e64dae5aa 100644 --- a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_thickerdraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_thickerdraft.inst.cfg @@ -4,12 +4,12 @@ name = Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = thickerdraft -material = generic_abs_175 weight = -3 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_ultra.inst.cfg b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_ultra.inst.cfg index 7ebdf80baf..5757e57a3b 100644 --- a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_ultra.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_ultra.inst.cfg @@ -4,12 +4,12 @@ name = Ultra Fine definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = thickerdraft -material = generic_abs_175 weight = 2 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_verydraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_verydraft.inst.cfg index 9965ae8bcf..77810c8809 100644 --- a/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_verydraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/abs/monoprice_select_mini_v2_abs_verydraft.inst.cfg @@ -4,12 +4,12 @@ name = Low Detail Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_abs_175 weight = -4 -setting_version = 4 +material = generic_abs [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Draft_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Draft_Quality.inst.cfg index b7d0faa2c7..d8aa07b779 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Draft_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Draft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Fast definition = monoprice_select_mini_v2 [metadata] -type = quality -weight = -2 -quality_type = draft -global_quality = True setting_version = 4 +type = quality +quality_type = draft +weight = -2 +global_quality = True [values] layer_height = 0.21875 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Fast_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Fast_Quality.inst.cfg index f7f338e4c9..a0620d532a 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Fast_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Fast_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = monoprice_select_mini_v2 [metadata] -type = quality -weight = -1 -quality_type = fast -global_quality = True setting_version = 4 +type = quality +quality_type = fast +weight = -1 +global_quality = True [values] layer_height = 0.175 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_High_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_High_Quality.inst.cfg index 4a37a1afd8..7237dbc42a 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_High_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Finer definition = monoprice_select_mini_v2 [metadata] -type = quality -weight = 1 -quality_type = high -global_quality = True setting_version = 4 +type = quality +quality_type = high +weight = 1 +global_quality = True [values] layer_height = 0.0875 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Normal_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Normal_Quality.inst.cfg index b8e545adcf..bcb360d310 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Normal_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = monoprice_select_mini_v2 [metadata] -type = quality -weight = 0 -quality_type = normal -global_quality = True setting_version = 4 +type = quality +quality_type = normal +weight = 0 +global_quality = True [values] layer_height = 0.13125 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_SuperDraft_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_SuperDraft_Quality.inst.cfg index 0ef9db5875..81954f86e7 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_SuperDraft_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_SuperDraft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Lowest Quality Draft definition = monoprice_select_mini_v2 [metadata] -type = quality -weight = -5 -quality_type = superdraft -global_quality = True setting_version = 4 +type = quality +quality_type = superdraft +weight = -5 +global_quality = True [values] layer_height = 0.35 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_ThickerDraft_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_ThickerDraft_Quality.inst.cfg index 4dd3a7aafe..1fe7ee22ab 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_ThickerDraft_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_ThickerDraft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Draft definition = monoprice_select_mini_v2 [metadata] -type = quality -weight = -3 -quality_type = thickerdraft -global_quality = True setting_version = 4 +type = quality +quality_type = thickerdraft +weight = -3 +global_quality = True [values] layer_height = 0.2625 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Ultra_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Ultra_Quality.inst.cfg index 337f0d06bc..89e2f43dad 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Ultra_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_Ultra_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Ultra Fine definition = monoprice_select_mini_v2 [metadata] -type = quality -weight = 2 -quality_type = ultra -global_quality = True setting_version = 4 +type = quality +quality_type = ultra +weight = 2 +global_quality = True [values] layer_height = 0.04375 diff --git a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_VeryDraft_Quality.inst.cfg b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_VeryDraft_Quality.inst.cfg index e884077069..c7fc09d9e8 100644 --- a/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_VeryDraft_Quality.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/monoprice_select_mini_v2_global_VeryDraft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Low Detail Draft definition = monoprice_select_mini_v2 [metadata] -type = quality -weight = -4 -quality_type = verydraft -global_quality = True setting_version = 4 +type = quality +quality_type = verydraft +weight = -4 +global_quality = True [values] layer_height = 0.30625 diff --git a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_draft.inst.cfg b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_draft.inst.cfg index 4a03c17a63..80905c64f7 100644 --- a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_draft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_draft.inst.cfg @@ -4,8 +4,8 @@ name = Fast definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_nylon_175 weight = -2 -setting_version = 4 \ No newline at end of file +material = generic_nylon diff --git a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_fast.inst.cfg b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_fast.inst.cfg index 1c04f77b8b..eab42b728e 100644 --- a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_fast.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_fast.inst.cfg @@ -4,8 +4,8 @@ name = Normal definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_nylon_175 weight = -1 -setting_version = 4 \ No newline at end of file +material = generic_nylon diff --git a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_high.inst.cfg b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_high.inst.cfg index d57516598a..1261eff697 100644 --- a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_high.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_high.inst.cfg @@ -4,8 +4,8 @@ name = Finer definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_nylon_175 weight = 1 -setting_version = 4 \ No newline at end of file +material = generic_nylon diff --git a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_normal.inst.cfg b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_normal.inst.cfg index 308ea86311..6cf8709bf6 100644 --- a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_normal.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_normal.inst.cfg @@ -4,8 +4,8 @@ name = Fine definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_nylon_175 weight = 0 -setting_version = 4 \ No newline at end of file +material = generic_nylon diff --git a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_superdraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_superdraft.inst.cfg index db4f3ca907..3cf4efb73b 100644 --- a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_superdraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_superdraft.inst.cfg @@ -4,8 +4,8 @@ name = Lowest Quality Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_nylon_175 weight = -5 -setting_version = 4 \ No newline at end of file +material = generic_nylon diff --git a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_thickerdraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_thickerdraft.inst.cfg index 9a1afc0e48..22f27ab084 100644 --- a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_thickerdraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_thickerdraft.inst.cfg @@ -4,8 +4,8 @@ name = Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = thickerdraft -material = generic_nylon_175 weight = -3 -setting_version = 4 \ No newline at end of file +material = generic_nylon diff --git a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_ultra.inst.cfg b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_ultra.inst.cfg index 3453671a72..b3b80d651f 100644 --- a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_ultra.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_ultra.inst.cfg @@ -4,8 +4,8 @@ name = Ultra Fine definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = ultra -material = generic_nylon_175 weight = 2 -setting_version = 4 \ No newline at end of file +material = generic_nylon diff --git a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_verydraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_verydraft.inst.cfg index ee2531fc4e..efd93a5381 100644 --- a/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_verydraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/nylon/monoprice_select_mini_v2_nylon_verydraft.inst.cfg @@ -4,8 +4,8 @@ name = Low Detail Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_nylon_175 weight = -4 -setting_version = 4 \ No newline at end of file +material = generic_nylon diff --git a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_draft.inst.cfg b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_draft.inst.cfg index aa5fc7844d..05283042c2 100644 --- a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_draft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_draft.inst.cfg @@ -4,12 +4,12 @@ name = Fast definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_pc_175 weight = -2 -setting_version = 4 +material = generic_pc [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_fast.inst.cfg b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_fast.inst.cfg index 232c4ab6f3..07319fe4db 100644 --- a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_fast.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_fast.inst.cfg @@ -4,12 +4,12 @@ name = Normal definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_pc_175 weight = -1 -setting_version = 4 +material = generic_pc [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_high.inst.cfg b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_high.inst.cfg index aa9da322fb..668040c851 100644 --- a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_high.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_high.inst.cfg @@ -4,12 +4,12 @@ name = Finer definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pc_175 weight = 1 -setting_version = 4 +material = generic_pc [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_normal.inst.cfg b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_normal.inst.cfg index 145b21221b..e9d907fabd 100644 --- a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_normal.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_normal.inst.cfg @@ -4,12 +4,12 @@ name = Fine definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pc_175 weight = 0 -setting_version = 4 +material = generic_pc [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_superdraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_superdraft.inst.cfg index b6e53bda62..5d1af5a430 100644 --- a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_superdraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_superdraft.inst.cfg @@ -4,12 +4,12 @@ name = Lowest Quality Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_pc_175 weight = -5 -setting_version = 4 +material = generic_pc [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_thickerdraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_thickerdraft.inst.cfg index 055228ab13..06c4b4f405 100644 --- a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_thickerdraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_thickerdraft.inst.cfg @@ -4,12 +4,12 @@ name = Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = thickerdraft -material = generic_pc_175 weight = -3 -setting_version = 4 +material = generic_pc [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_ultra.inst.cfg b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_ultra.inst.cfg index a3e99b998e..821658554d 100644 --- a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_ultra.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_ultra.inst.cfg @@ -4,12 +4,12 @@ name = Ultra Fine definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = ultra -material = generic_pc_175 weight = 2 -setting_version = 4 +material = generic_pc [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_verydraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_verydraft.inst.cfg index 73f5a2f2c9..93dc04e13c 100644 --- a/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_verydraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pc/monoprice_select_mini_v2_pc_verydraft.inst.cfg @@ -4,12 +4,12 @@ name = Low Detail Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_pc_175 weight = -4 -setting_version = 4 +material = generic_pc [values] material_bed_temperature = 70 -material_bed_temperature_layer_0 = 70 \ No newline at end of file +material_bed_temperature_layer_0 = 70 diff --git a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_draft.inst.cfg b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_draft.inst.cfg index 8a33e03310..917e8b98a3 100644 --- a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_draft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_draft.inst.cfg @@ -4,8 +4,8 @@ name = Fast definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_petg_175 weight = -2 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_fast.inst.cfg b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_fast.inst.cfg index fb084fa08e..aa98ea4de0 100644 --- a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_fast.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_fast.inst.cfg @@ -4,8 +4,8 @@ name = Normal definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_petg_175 weight = -1 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_high.inst.cfg b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_high.inst.cfg index 16891f6f43..3db3af0db2 100644 --- a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_high.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_high.inst.cfg @@ -4,8 +4,8 @@ name = Finer definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_petg_175 weight = 1 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_normal.inst.cfg b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_normal.inst.cfg index bb2f0b47a8..e39fd54550 100644 --- a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_normal.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_normal.inst.cfg @@ -4,8 +4,8 @@ name = Fine definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_petg_175 weight = 0 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_superdraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_superdraft.inst.cfg index 78ca1b6b7a..6d9e99d365 100644 --- a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_superdraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_superdraft.inst.cfg @@ -4,8 +4,8 @@ name = Lowest Quality Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_petg_175 weight = -5 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_thickerdraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_thickerdraft.inst.cfg index 69606ff913..5227aac686 100644 --- a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_thickerdraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_thickerdraft.inst.cfg @@ -4,8 +4,8 @@ name = Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = thickerdraft -material = generic_petg_175 weight = -3 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_ultra.inst.cfg b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_ultra.inst.cfg index 7c5ac599c8..a58c05b004 100644 --- a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_ultra.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_ultra.inst.cfg @@ -4,8 +4,8 @@ name = Ultra Fine definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = ultra -material = generic_petg_175 weight = 2 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_verydraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_verydraft.inst.cfg index ed0c2510f5..0fe38fb5df 100644 --- a/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_verydraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/petg/monoprice_select_mini_v2_petg_verydraft.inst.cfg @@ -4,8 +4,8 @@ name = Low Detail Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_petg_175 weight = -4 -setting_version = 4 \ No newline at end of file +material = generic_petg diff --git a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_draft.inst.cfg b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_draft.inst.cfg index 04a955cf6c..0b9f10a790 100644 --- a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_draft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_draft.inst.cfg @@ -4,8 +4,8 @@ name = Fast definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_pla_175 weight = -2 -setting_version = 4 \ No newline at end of file +material = generic_pla diff --git a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_fast.inst.cfg b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_fast.inst.cfg index 6efc0935e2..d831890413 100644 --- a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_fast.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_fast.inst.cfg @@ -4,8 +4,8 @@ name = Normal definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_pla_175 weight = 0 -setting_version = 4 \ No newline at end of file +material = generic_pla diff --git a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_high.inst.cfg b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_high.inst.cfg index 8fe2371e5d..f5049308f3 100644 --- a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_high.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_high.inst.cfg @@ -4,8 +4,8 @@ name = Finer definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pla_175 weight = 0 -setting_version = 4 \ No newline at end of file +material = generic_pla diff --git a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_normal.inst.cfg b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_normal.inst.cfg index 01351154c4..f63c87a52c 100644 --- a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_normal.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_normal.inst.cfg @@ -4,8 +4,8 @@ name = Fine definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pla_175 weight = 0 -setting_version = 4 \ No newline at end of file +material = generic_pla diff --git a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_superdraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_superdraft.inst.cfg index adfced9787..a8bd9a5179 100644 --- a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_superdraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_superdraft.inst.cfg @@ -4,8 +4,8 @@ name = Lowest Quality Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_pla_175 weight = -5 -setting_version = 4 \ No newline at end of file +material = generic_pla diff --git a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_thickerdraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_thickerdraft.inst.cfg index f4522c9778..df1ae97a16 100644 --- a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_thickerdraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_thickerdraft.inst.cfg @@ -4,8 +4,8 @@ name = Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = thickerdraft -material = generic_pla_175 weight = -3 -setting_version = 4 \ No newline at end of file +material = generic_pla diff --git a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_ultra.inst.cfg b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_ultra.inst.cfg index 2fa8eb7f81..3b3ec79692 100644 --- a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_ultra.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_ultra.inst.cfg @@ -4,8 +4,8 @@ name = Ultra Fine definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality quality_type = ultra -material = generic_pla_175 weight = 2 -setting_version = 4 \ No newline at end of file +material = generic_pla diff --git a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_verydraft.inst.cfg b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_verydraft.inst.cfg index e59cf4a490..5e63de3952 100644 --- a/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_verydraft.inst.cfg +++ b/resources/quality/monoprice_select_mini_v2/pla/monoprice_select_mini_v2_pla_verydraft.inst.cfg @@ -4,8 +4,8 @@ name = Low Detail Draft definition = monoprice_select_mini_v2 [metadata] +setting_version = 4 type = quality -quality_type = verydraft -material = generic_pla_175 +material = generic_pla weight = 0 -setting_version = 4 \ No newline at end of file +quality_type = verydraft diff --git a/resources/quality/normal.inst.cfg b/resources/quality/normal.inst.cfg index 9fb7b238cd..2eeb91324f 100644 --- a/resources/quality/normal.inst.cfg +++ b/resources/quality/normal.inst.cfg @@ -4,10 +4,10 @@ name = Fine definition = fdmprinter [metadata] +setting_version = 4 type = quality quality_type = normal -global_quality = True weight = 0 -setting_version = 4 +global_quality = True [values] diff --git a/resources/quality/peopoly_moai/peopoly_moai_high.inst.cfg b/resources/quality/peopoly_moai/peopoly_moai_high.inst.cfg index ae8a377116..208fa453fe 100644 --- a/resources/quality/peopoly_moai/peopoly_moai_high.inst.cfg +++ b/resources/quality/peopoly_moai/peopoly_moai_high.inst.cfg @@ -4,10 +4,10 @@ name = Extra Fine definition = peopoly_moai [metadata] -type = quality -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 [values] infill_sparse_density = 70 diff --git a/resources/quality/peopoly_moai/peopoly_moai_max.inst.cfg b/resources/quality/peopoly_moai/peopoly_moai_max.inst.cfg index 07ab7e364b..cc764009a9 100644 --- a/resources/quality/peopoly_moai/peopoly_moai_max.inst.cfg +++ b/resources/quality/peopoly_moai/peopoly_moai_max.inst.cfg @@ -4,10 +4,10 @@ name = Maximum Quality definition = peopoly_moai [metadata] -type = quality -weight = 2 -quality_type = extra_high setting_version = 4 +type = quality +quality_type = extra_high +weight = 2 [values] infill_sparse_density = 70 diff --git a/resources/quality/peopoly_moai/peopoly_moai_normal.inst.cfg b/resources/quality/peopoly_moai/peopoly_moai_normal.inst.cfg index e0d2f7d818..2baa70be1e 100644 --- a/resources/quality/peopoly_moai/peopoly_moai_normal.inst.cfg +++ b/resources/quality/peopoly_moai/peopoly_moai_normal.inst.cfg @@ -4,10 +4,10 @@ name = Fine definition = peopoly_moai [metadata] -type = quality -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 [values] infill_sparse_density = 70 diff --git a/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg b/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg index 082b7dded7..2536cbba12 100644 --- a/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg +++ b/resources/quality/tevo_blackwidow/tevo_blackwidow_draft.inst.cfg @@ -4,10 +4,10 @@ name = Draft definition = tevo_blackwidow [metadata] +setting_version = 4 type = quality quality_type = draft weight = -2 -setting_version = 4 [values] brim_width = 4.0 @@ -30,4 +30,4 @@ support_type = everywhere support_use_towers = False support_xy_distance = 0.7 top_bottom_thickness = 1.2 -wall_thickness = 1.2 \ No newline at end of file +wall_thickness = 1.2 diff --git a/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg b/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg index 79d020463f..29599eaebc 100644 --- a/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg +++ b/resources/quality/tevo_blackwidow/tevo_blackwidow_high.inst.cfg @@ -4,10 +4,10 @@ name = High definition = tevo_blackwidow [metadata] +setting_version = 4 type = quality quality_type = high weight = 1 -setting_version = 4 [values] brim_width = 4.0 @@ -30,4 +30,4 @@ support_type = everywhere support_use_towers = False support_xy_distance = 0.7 top_bottom_thickness = 1.2 -wall_thickness = 1.2 \ No newline at end of file +wall_thickness = 1.2 diff --git a/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg b/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg index 2982c44d3d..98dbf5a79a 100644 --- a/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg +++ b/resources/quality/tevo_blackwidow/tevo_blackwidow_normal.inst.cfg @@ -4,10 +4,10 @@ name = Normal definition = tevo_blackwidow [metadata] +setting_version = 4 type = quality quality_type = normal weight = 0 -setting_version = 4 [values] brim_width = 4.0 @@ -30,4 +30,4 @@ support_type = everywhere support_use_towers = False support_xy_distance = 0.7 top_bottom_thickness = 1.2 -wall_thickness = 1.2 \ No newline at end of file +wall_thickness = 1.2 diff --git a/resources/quality/ultimaker2/um2_draft.inst.cfg b/resources/quality/ultimaker2/um2_draft.inst.cfg index 4fe3f51e20..88d3ed3520 100644 --- a/resources/quality/ultimaker2/um2_draft.inst.cfg +++ b/resources/quality/ultimaker2/um2_draft.inst.cfg @@ -4,10 +4,11 @@ name = Draft Quality definition = ultimaker2 [metadata] +setting_version = 4 type = quality quality_type = draft weight = -2 -setting_version = 4 +global_quality = True [values] layer_height = 0.2 diff --git a/resources/quality/ultimaker2/um2_low.inst.cfg b/resources/quality/ultimaker2/um2_fast.inst.cfg similarity index 87% rename from resources/quality/ultimaker2/um2_low.inst.cfg rename to resources/quality/ultimaker2/um2_fast.inst.cfg index 832962984c..36e4fe03c2 100644 --- a/resources/quality/ultimaker2/um2_low.inst.cfg +++ b/resources/quality/ultimaker2/um2_fast.inst.cfg @@ -4,10 +4,11 @@ name = Low Quality definition = ultimaker2 [metadata] -type = quality -quality_type = low -weight = -1 setting_version = 4 +type = quality +quality_type = fast +weight = -1 +global_quality = True [values] infill_sparse_density = 10 diff --git a/resources/quality/ultimaker2/um2_high.inst.cfg b/resources/quality/ultimaker2/um2_high.inst.cfg index 96941beed2..2fb7ead455 100644 --- a/resources/quality/ultimaker2/um2_high.inst.cfg +++ b/resources/quality/ultimaker2/um2_high.inst.cfg @@ -4,10 +4,11 @@ name = Extra Fine definition = ultimaker2 [metadata] +setting_version = 4 type = quality quality_type = high weight = 1 -setting_version = 4 +global_quality = True [values] layer_height = 0.06 diff --git a/resources/quality/ultimaker2/um2_normal.inst.cfg b/resources/quality/ultimaker2/um2_normal.inst.cfg index ea804feb80..51fe1f317c 100644 --- a/resources/quality/ultimaker2/um2_normal.inst.cfg +++ b/resources/quality/ultimaker2/um2_normal.inst.cfg @@ -4,9 +4,10 @@ name = Fine definition = ultimaker2 [metadata] +setting_version = 4 type = quality quality_type = normal weight = 0 -setting_version = 4 +global_quality = True [values] diff --git a/resources/quality/ultimaker2_plus/pla_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.25_normal.inst.cfg index 638a1a9384..07e3dcd7db 100644 --- a/resources/quality/ultimaker2_plus/pla_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.25_normal.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_pla_ultimaker2_plus_0.25_mm -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_pla +variant = 0.25 mm [values] cool_min_layer_time = 5 @@ -19,4 +20,3 @@ speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 wall_thickness = 0.88 - diff --git a/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg index 9f4dfc0b5d..2a72e40d80 100644 --- a/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.4_fast.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_pla_ultimaker2_plus_0.4_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_pla +variant = 0.4 mm [values] cool_min_layer_time = 5 @@ -22,4 +23,3 @@ speed_travel = 150 speed_wall = 50 top_bottom_thickness = 0.75 wall_thickness = 0.7 - diff --git a/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg index 7bf51b0211..ce41158378 100644 --- a/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.4_high.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_pla_ultimaker2_plus_0.4_mm -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_pla +variant = 0.4 mm [values] cool_min_layer_time = 5 @@ -20,4 +21,3 @@ speed_print = 50 speed_topbottom = 20 top_bottom_thickness = 0.72 wall_thickness = 1.05 - diff --git a/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg index 3c6f40e0bc..edfe131ddf 100644 --- a/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.4_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_pla_ultimaker2_plus_0.4_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pla +variant = 0.4 mm [values] cool_min_layer_time = 5 @@ -20,4 +21,3 @@ speed_print = 50 speed_topbottom = 20 top_bottom_thickness = 0.8 wall_thickness = 1.05 - diff --git a/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg index ef79e30b74..548c7478ba 100644 --- a/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.6_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -material = generic_pla_ultimaker2_plus_0.6_mm -type = quality -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pla +variant = 0.6 mm [values] cool_min_layer_time = 5 @@ -22,4 +23,3 @@ speed_wall = 40 speed_wall_0 = 25 top_bottom_thickness = 1.2 wall_thickness = 1.59 - diff --git a/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg index 42418ea392..a257d3d6f8 100644 --- a/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/pla_0.8_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -material = generic_pla_ultimaker2_plus_0.8_mm -type = quality -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_pla +variant = 0.8 mm [values] cool_min_layer_time = 5 @@ -20,4 +21,3 @@ speed_print = 40 speed_wall_0 = 25 top_bottom_thickness = 1.2 wall_thickness = 2.1 - diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg index 50a4076de2..e448b9d180 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.25_normal.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_abs_ultimaker2_plus_0.25_mm -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_abs +variant = 0.25 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.2 @@ -21,4 +22,3 @@ speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 wall_thickness = 0.88 - diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg index 9d1bcf6ff5..3fd2de3a36 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_fast.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_abs_ultimaker2_plus_0.4_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_abs +variant = 0.4 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.2 @@ -24,4 +25,3 @@ speed_travel = 150 speed_wall = 40 top_bottom_thickness = 0.75 wall_thickness = 0.7 - diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg index 84a5557434..2f119ae86b 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_high.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_abs_ultimaker2_plus_0.4_mm -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_abs +variant = 0.4 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.2 @@ -22,4 +23,3 @@ speed_print = 45 speed_wall = 30 top_bottom_thickness = 0.72 wall_thickness = 1.05 - diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg index efc749ad8c..8416e69dba 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.4_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_abs_ultimaker2_plus_0.4_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_abs +variant = 0.4 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.2 @@ -22,4 +23,3 @@ speed_print = 45 speed_wall = 30 top_bottom_thickness = 0.8 wall_thickness = 1.05 - diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg index eb706c5762..393e630299 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.6_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_abs_ultimaker2_plus_0.6_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_abs +variant = 0.6 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.5 @@ -22,4 +23,3 @@ speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 wall_thickness = 1.59 - diff --git a/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg index 2dba5a9304..d0dcbb0908 100644 --- a/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_abs_0.8_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_abs_ultimaker2_plus_0.8_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_abs +variant = 0.8 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.5 @@ -21,4 +22,3 @@ speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 wall_thickness = 2.1 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg index 8e87e0e7b6..1047b0ca39 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.25_normal.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_ultimaker2_plus_0.25_mm -weight = -1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = -1 +material = generic_cpe +variant = 0.25 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.2 @@ -21,4 +22,3 @@ speed_layer_0 = =round(speed_print * 30 / 30) speed_print = 30 top_bottom_thickness = 0.72 wall_thickness = 0.88 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg index e311df00a8..7beaf2f229 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_fast.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_ultimaker2_plus_0.4_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_cpe +variant = 0.4 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.8 @@ -23,4 +24,3 @@ speed_travel = 150 speed_wall = 40 top_bottom_thickness = 0.75 wall_thickness = 0.7 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg index 685b7798fc..efd73655b1 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_high.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_ultimaker2_plus_0.4_mm -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_cpe +variant = 0.4 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.8 @@ -22,4 +23,3 @@ speed_print = 45 speed_wall = 30 top_bottom_thickness = 0.72 wall_thickness = 1.05 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg index aadb4195f3..3badb3f191 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.4_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_ultimaker2_plus_0.4_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_cpe +variant = 0.4 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.8 @@ -22,4 +23,3 @@ speed_print = 45 speed_wall = 30 top_bottom_thickness = 0.8 wall_thickness = 1.05 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg index 332033368f..727d68eede 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.6_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_ultimaker2_plus_0.6_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_cpe +variant = 0.6 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.8 @@ -21,4 +22,3 @@ speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 wall_thickness = 1.59 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg index e4fcae8aa1..1460d69b7a 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpe_0.8_normal.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_ultimaker2_plus_0.8_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_cpe +variant = 0.8 mm [values] cool_fan_speed_min = =cool_fan_speed * 0.8 @@ -21,4 +22,3 @@ speed_layer_0 = =round(speed_print * 30 / 40) speed_print = 40 top_bottom_thickness = 1.2 wall_thickness = 2.1 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg index 55af936a89..be33739e72 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_draft.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_plus_ultimaker2_plus_0.4_mm -weight = -2 -quality_type = draft setting_version = 4 +type = quality +quality_type = draft +weight = -2 +material = generic_cpe_plus +variant = 0.4 mm [values] adhesion_type = raft @@ -40,4 +41,3 @@ support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.5 wall_thickness = 1.14 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg index eb0ca5e81f..58cf4bd0e3 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.4_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_plus_ultimaker2_plus_0.4_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_cpe_plus +variant = 0.4 mm [values] adhesion_type = raft @@ -40,4 +41,3 @@ support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.5 wall_thickness = 1.14 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg index b324d867bc..fe4f895611 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_draft.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_plus_ultimaker2_plus_0.6_mm -weight = -2 -quality_type = draft setting_version = 4 +type = quality +quality_type = draft +weight = -2 +material = generic_cpe_plus +variant = 0.6 mm [values] adhesion_type = raft @@ -44,4 +45,3 @@ support_xy_distance = 0.6 support_z_distance = 0.22 top_bottom_thickness = 0.75 wall_thickness = 1.14 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg index c8c7576d30..bcc507a3d9 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.6_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_plus_ultimaker2_plus_0.6_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_cpe_plus +variant = 0.6 mm [values] adhesion_type = raft @@ -44,4 +45,3 @@ support_xy_distance = 0.6 support_z_distance = 0.22 top_bottom_thickness = 0.75 wall_thickness = 1.14 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg index 28353f729d..c27d90ead8 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_draft.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_plus_ultimaker2_plus_0.8_mm -weight = -2 -quality_type = draft setting_version = 4 +type = quality +quality_type = draft +weight = -2 +material = generic_cpe_plus +variant = 0.8 mm [values] adhesion_type = raft @@ -39,4 +40,3 @@ support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.2 wall_thickness = 2.1 - diff --git a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg index f74db21b91..7eb8b1fd72 100644 --- a/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_cpep_0.8_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_cpe_plus_ultimaker2_plus_0.8_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_cpe_plus +variant = 0.8 mm [values] adhesion_type = raft @@ -39,4 +40,3 @@ support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.2 wall_thickness = 2.1 - diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg index b8924423e2..33041f89ae 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_high.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_nylon_ultimaker2_plus_0.25_mm -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_nylon +variant = 0.25 mm [values] adhesion_type = raft @@ -41,4 +42,3 @@ support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 wall_thickness = 1 - diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg index 323fa51a8d..88974491cb 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.25_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_nylon_ultimaker2_plus_0.25_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_nylon +variant = 0.25 mm [values] adhesion_type = raft @@ -41,4 +42,3 @@ support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 wall_thickness = 1 - diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg index 7628cd0be1..832fa12bc9 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_fast.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_nylon_ultimaker2_plus_0.4_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_nylon +variant = 0.4 mm [values] adhesion_type = raft @@ -40,4 +41,3 @@ support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 0.75 wall_thickness = 1.06 - diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg index a97a4c4e8f..c12573691e 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.4_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_nylon_ultimaker2_plus_0.4_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_nylon +variant = 0.4 mm [values] adhesion_type = raft @@ -39,4 +40,3 @@ support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 0.75 wall_thickness = 1.06 - diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg index 0cd7bbdbfd..eaa4f86e23 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_fast.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_nylon_ultimaker2_plus_0.6_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_nylon +variant = 0.6 mm [values] adhesion_type = raft @@ -45,4 +46,3 @@ support_xy_distance = 0.7 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 wall_thickness = 1.2 - diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg index d5e0025913..5e3db4db22 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.6_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_nylon_ultimaker2_plus_0.6_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_nylon +variant = 0.6 mm [values] adhesion_type = raft @@ -43,4 +44,3 @@ support_xy_distance = 0.7 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 wall_thickness = 1.2 - diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg index f653a90f95..38a71c9109 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_draft.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker2_plus [metadata] -type = quality -material = generic_nylon_ultimaker2_plus_0.8_mm -weight = -2 -quality_type = draft setting_version = 4 +type = quality +quality_type = draft +weight = -2 +material = generic_nylon +variant = 0.8 mm [values] adhesion_type = raft @@ -44,4 +45,3 @@ support_xy_distance = 0.75 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 wall_thickness = 2.4 - diff --git a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg index 144c8e74ac..9d20a6d91f 100644 --- a/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_nylon_0.8_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_nylon_ultimaker2_plus_0.8_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_nylon +variant = 0.8 mm [values] adhesion_type = raft @@ -44,4 +45,3 @@ support_xy_distance = 0.75 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 wall_thickness = 2.4 - diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg index d38f2af4d3..7829d7b7b9 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_high.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_pc_ultimaker2_plus_0.25_mm -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_pc +variant = 0.25 mm [values] adhesion_type = raft @@ -35,4 +36,3 @@ support_infill_rate = 20 support_pattern = lines support_z_distance = 0.19 wall_thickness = 0.88 - diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg index aa176f67a2..168a308916 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.25_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_pc_ultimaker2_plus_0.25_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pc +variant = 0.25 mm [values] adhesion_type = raft @@ -35,4 +36,3 @@ support_infill_rate = 20 support_pattern = lines support_z_distance = 0.19 wall_thickness = 0.88 - diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg index 0408ead05e..46a349d81f 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_fast.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_pc_ultimaker2_plus_0.4_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_pc +variant = 0.4 mm [values] adhesion_type = raft @@ -36,4 +37,3 @@ support_infill_rate = 20 support_pattern = lines support_z_distance = 0.19 wall_thickness = 1.2 - diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg index ed430f10c0..0c2450f512 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.4_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_pc_ultimaker2_plus_0.4_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pc +variant = 0.4 mm [values] adhesion_type = raft @@ -36,4 +37,3 @@ support_infill_rate = 20 support_pattern = lines support_z_distance = 0.19 wall_thickness = 1.2 - diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg index b6c3a66c0b..68528a0209 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_fast.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_pc_ultimaker2_plus_0.6_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_pc +variant = 0.6 mm [values] adhesion_type = raft @@ -42,4 +43,3 @@ support_pattern = lines support_z_distance = 0.21 top_bottom_thickness = 0.75 wall_thickness = 1.06 - diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg index 0dfb533f56..a92110a149 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.6_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_pc_ultimaker2_plus_0.6_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pc +variant = 0.6 mm [values] adhesion_type = raft @@ -42,4 +43,3 @@ support_pattern = lines support_z_distance = 0.21 top_bottom_thickness = 0.75 wall_thickness = 1.06 - diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg index 3eee23006f..8c8bff3846 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_draft.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker2_plus [metadata] -type = quality -material = generic_pc_ultimaker2_plus_0.8_mm -weight = -2 -quality_type = draft setting_version = 4 +type = quality +quality_type = draft +weight = -2 +material = generic_pc +variant = 0.8 mm [values] adhesion_type = raft @@ -36,4 +37,3 @@ support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 2.0 wall_thickness = 2.1 - diff --git a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg index 40da82e6bf..db83d5181f 100644 --- a/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pc_0.8_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_pc_ultimaker2_plus_0.8_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pc +variant = 0.8 mm [values] adhesion_type = raft @@ -36,4 +37,3 @@ support_pattern = lines support_z_distance = 0.26 top_bottom_thickness = 1.2 wall_thickness = 2.1 - diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg index 6f4e366209..b7474044f3 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_pp_ultimaker2_plus_0.4_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_pp +variant = 0.4 mm [values] acceleration_enabled = True @@ -68,4 +69,3 @@ travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) wall_thickness = 0.76 - diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg index c7224f475f..f6d2c38161 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_pp_ultimaker2_plus_0.4_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_pp +variant = 0.4 mm [values] acceleration_enabled = True @@ -67,4 +68,3 @@ travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.38 / 0.38, 2) wall_thickness = 0.76 - diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg index 203db9883e..99fdf8346c 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker2_plus [metadata] -type = quality -material = generic_pp_ultimaker2_plus_0.6_mm -weight = -2 -quality_type = draft setting_version = 4 +type = quality +quality_type = draft +weight = -2 +material = generic_pp +variant = 0.6 mm [values] acceleration_enabled = True @@ -46,7 +47,6 @@ retraction_extrusion_window = 1 retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True -retraction_min_travel = 0.5 retraction_prime_speed = 15 skin_overlap = 10 skirt_brim_line_width = 0.6 @@ -70,4 +70,3 @@ travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) wall_thickness = 1.14 - diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg index 64dfbc9281..7a9ec8e4e3 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_pp_ultimaker2_plus_0.6_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_pp +variant = 0.6 mm [values] acceleration_enabled = True @@ -46,7 +47,6 @@ retraction_extrusion_window = 1 retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True -retraction_min_travel = 0.5 retraction_prime_speed = 15 skin_overlap = 10 skirt_brim_line_width = 0.6 @@ -70,4 +70,3 @@ travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.57 / 0.57, 2) wall_thickness = 1.14 - diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg index f6d56242dd..071c50c05b 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker2_plus [metadata] -type = quality -material = generic_pp_ultimaker2_plus_0.8_mm -weight = -2 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -2 +material = generic_pp +variant = 0.8 mm [values] acceleration_enabled = True @@ -46,7 +47,6 @@ retraction_extrusion_window = 1 retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True -retraction_min_travel = 0.5 retraction_prime_speed = 15 skin_overlap = 10 skirt_brim_line_width = 0.8 @@ -70,4 +70,3 @@ travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 - diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg index ecb3e3da4a..cbea59a879 100644 --- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fast definition = ultimaker2_plus [metadata] -type = quality -material = generic_pp_ultimaker2_plus_0.8_mm -weight = -3 -quality_type = draft setting_version = 4 +type = quality +quality_type = draft +weight = -3 +material = generic_pp +variant = 0.8 mm [values] acceleration_enabled = True @@ -46,7 +47,6 @@ retraction_extrusion_window = 1 retraction_hop = 0.15 retraction_hop_enabled = True retraction_hop_only_when_collides = True -retraction_min_travel = 0.5 retraction_prime_speed = 15 skin_overlap = 10 skirt_brim_line_width = 0.8 @@ -70,4 +70,3 @@ travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =round(line_width * 0.76 / 0.76, 2) wall_thickness = 1.52 - diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg index b1cb56a543..2ad062bd31 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_tpu_ultimaker2_plus_0.25_mm -weight = 1 -quality_type = high setting_version = 4 +type = quality +quality_type = high +weight = 1 +material = generic_tpu +variant = 0.25 mm [values] adhesion_type = brim @@ -40,4 +41,3 @@ support_xy_distance = 0.6 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 wall_thickness = 0.88 - diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg index 80cc92fe64..56ce55ee96 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker2_plus [metadata] -type = quality -material = generic_tpu_ultimaker2_plus_0.4_mm -weight = 0 -quality_type = normal setting_version = 4 +type = quality +quality_type = normal +weight = 0 +material = generic_tpu +variant = 0.4 mm [values] adhesion_type = brim @@ -37,4 +38,3 @@ support_xy_distance = 0.65 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 wall_thickness = 1.05 - diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg index 9796adada9..6bcc5fa31f 100644 --- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg +++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker2_plus [metadata] -type = quality -material = generic_tpu_ultimaker2_plus_0.6_mm -weight = -1 -quality_type = fast setting_version = 4 +type = quality +quality_type = fast +weight = -1 +material = generic_tpu +variant = 0.6 mm [values] adhesion_type = brim @@ -42,4 +43,3 @@ support_xy_distance = 0.7 support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 wall_thickness = 1.14 - diff --git a/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg index fc7d4d12d2..0b100d8717 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_ABS_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_abs_ultimaker3_AA_0.25 weight = 0 -setting_version = 4 +material = generic_abs +variant = AA 0.25 [values] cool_fan_speed = 40 @@ -20,4 +21,3 @@ prime_tower_wall_thickness = 0.9 retraction_prime_speed = 25 speed_topbottom = =math.ceil(speed_print * 30 / 55) wall_thickness = 0.92 - diff --git a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg index 83e0c549c4..77494d6339 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_CPE_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_cpe_ultimaker3_AA_0.25 weight = 0 -setting_version = 4 +material = generic_cpe +variant = AA 0.25 [values] prime_tower_size = 12 @@ -18,4 +19,3 @@ speed_infill = 40 speed_topbottom = =math.ceil(speed_print * 30 / 55) top_bottom_thickness = 0.8 wall_thickness = 0.92 - diff --git a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg index 58ddc32101..0187084ff8 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_Nylon_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_nylon_ultimaker3_AA_0.25 weight = 0 -setting_version = 4 +material = generic_nylon +variant = AA 0.25 [values] cool_min_layer_time_fan_speed_max = 20 @@ -32,4 +33,3 @@ switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width - diff --git a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg index 7c9fa32949..0070419a4e 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PC_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine - Experimental definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pc_ultimaker3_AA_0.25 weight = 0 -setting_version = 4 +material = generic_pc +variant = AA 0.25 [values] acceleration_enabled = True @@ -53,4 +54,3 @@ switch_extruder_retraction_speeds = 35 wall_0_inset = 0 wall_line_width_x = =line_width wall_thickness = 1.2 - diff --git a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg index 1bee4b8f18..b2347f1902 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PLA_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pla_ultimaker3_AA_0.25 weight = 0 -setting_version = 4 +material = generic_pla +variant = AA 0.25 [values] brim_width = 8 @@ -33,4 +34,3 @@ travel_avoid_distance = 0.4 wall_0_inset = 0.015 wall_0_wipe_dist = 0.25 wall_thickness = 0.7 - diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg index ccc558530e..732289dedf 100644 --- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine - Experimental definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pp_ultimaker3_AA_0.25 weight = 0 -setting_version = 4 +material = generic_pp +variant = AA 0.25 [values] acceleration_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg index 13dca72c27..a5cc4aaa0c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_abs_ultimaker3_AA_0.4 weight = -2 -setting_version = 4 +material = generic_abs +variant = AA 0.4 [values] machine_nozzle_cool_down_speed = 0.85 @@ -24,4 +25,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) wall_thickness = 1 - diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg index 10fa10c726..ba80ad588e 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_abs_ultimaker3_AA_0.4 weight = -1 -setting_version = 4 +material = generic_abs +variant = AA 0.4 [values] cool_min_speed = 7 @@ -24,4 +25,3 @@ speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg index 02f2327468..c84ef6dabe 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_abs_ultimaker3_AA_0.4 weight = 1 -setting_version = 4 +material = generic_abs +variant = AA 0.4 [values] cool_min_speed = 12 @@ -23,4 +24,3 @@ speed_print = 50 speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) - diff --git a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg index fccb6a35f5..f3c9f6a892 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_abs_ultimaker3_AA_0.4 weight = 0 -setting_version = 4 +material = generic_abs +variant = AA 0.4 [values] machine_nozzle_cool_down_speed = 0.85 @@ -21,4 +22,3 @@ speed_print = 55 speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) - diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg index f3c6ae8387..fbc0c599ef 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_bam_ultimaker3_AA_0.4 weight = -2 -setting_version = 4 +material = generic_bam +variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg index e027477595..d6f64cb056 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_bam_ultimaker3_AA_0.4 weight = -1 -setting_version = 4 +material = generic_bam +variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg index 3ced3a0417..53fb52bff6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_BAM_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_bam_ultimaker3_AA_0.4 weight = 0 -setting_version = 4 +material = generic_bam +variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg index dfdb1ca8a7..dd089294de 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_cpe_plus_ultimaker3_AA_0.4 weight = -2 -setting_version = 4 +material = generic_cpe_plus +variant = AA 0.4 [values] acceleration_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg index 93b371a627..373107d767 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_cpe_plus_ultimaker3_AA_0.4 weight = -1 -setting_version = 4 +material = generic_cpe_plus +variant = AA 0.4 [values] acceleration_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg index 93647f9f44..67544db97b 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_High_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_cpe_plus_ultimaker3_AA_0.4 weight = 1 -setting_version = 4 +material = generic_cpe_plus +variant = AA 0.4 [values] acceleration_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg index 2886ef2229..183d05ce60 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPEP_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_cpe_plus_ultimaker3_AA_0.4 weight = 0 -setting_version = 4 +material = generic_cpe_plus +variant = AA 0.4 [values] acceleration_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg index 5e3daf5a9e..74395628af 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_cpe_ultimaker3_AA_0.4 weight = -2 -setting_version = 4 +material = generic_cpe +variant = AA 0.4 [values] material_print_temperature = =default_material_print_temperature + 10 @@ -22,4 +23,3 @@ speed_topbottom = =math.ceil(speed_print * 35 / 60) speed_wall = =math.ceil(speed_print * 45 / 60) speed_wall_0 = =math.ceil(speed_wall * 35 / 45) wall_thickness = 1 - diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg index e48f83994d..dbcf7f3e42 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_cpe_ultimaker3_AA_0.4 weight = -1 -setting_version = 4 +material = generic_cpe +variant = AA 0.4 [values] cool_min_speed = 7 @@ -21,4 +22,3 @@ speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 40 / 60) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) - diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg index fd0a8cd18d..89b5210631 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_cpe_ultimaker3_AA_0.4 weight = 1 -setting_version = 4 +material = generic_cpe +variant = AA 0.4 [values] cool_min_speed = 12 @@ -22,4 +23,3 @@ speed_print = 50 speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 50) speed_wall = =math.ceil(speed_print * 30 / 50) - diff --git a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg index 56c997eb15..12927714ec 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_cpe_ultimaker3_AA_0.4 weight = 0 -setting_version = 4 +material = generic_cpe +variant = AA 0.4 [values] machine_nozzle_cool_down_speed = 0.85 @@ -20,4 +21,3 @@ speed_print = 55 speed_layer_0 = 20 speed_topbottom = =math.ceil(speed_print * 30 / 55) speed_wall = =math.ceil(speed_print * 30 / 55) - diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg index 15283a3242..ff938df8f8 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_nylon_ultimaker3_AA_0.4 weight = -2 -setting_version = 4 +material = generic_nylon +variant = AA 0.4 [values] adhesion_type = brim @@ -33,4 +34,3 @@ switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width - diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg index c063725e82..e9fd6df1e2 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_nylon_ultimaker3_AA_0.4 weight = -1 -setting_version = 4 +material = generic_nylon +variant = AA 0.4 [values] adhesion_type = brim @@ -33,4 +34,3 @@ switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width - diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg index 218e1e50e1..635cc573ea 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_High_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_nylon_ultimaker3_AA_0.4 weight = 1 -setting_version = 4 +material = generic_nylon +variant = AA 0.4 [values] adhesion_type = brim @@ -32,4 +33,3 @@ switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width - diff --git a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg index 3b96939ac9..778ace19e4 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_Nylon_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_nylon_ultimaker3_AA_0.4 weight = 0 -setting_version = 4 +material = generic_nylon +variant = AA 0.4 [values] adhesion_type = brim @@ -32,4 +33,3 @@ switch_extruder_prime_speed = 30 switch_extruder_retraction_amount = 30 switch_extruder_retraction_speeds = 40 wall_line_width_x = =wall_line_width - diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg index f8b4dd067c..437e4676b3 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_pc_ultimaker3_AA_0.4 weight = -2 -setting_version = 4 +material = generic_pc +variant = AA 0.4 [values] acceleration_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg index 1db3935180..320cf0a96f 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_pc_ultimaker3_AA_0.4 weight = -1 -setting_version = 4 +material = generic_pc +variant = AA 0.4 [values] acceleration_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg index 0f9e9b15b0..6d7e8f7976 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_High_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pc_ultimaker3_AA_0.4 weight = 1 -setting_version = 4 +material = generic_pc +variant = AA 0.4 [values] acceleration_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg index 26a3136069..c18e9dbbd5 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PC_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pc_ultimaker3_AA_0.4 weight = 0 -setting_version = 4 +material = generic_pc +variant = AA 0.4 [values] acceleration_enabled = True diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg index a32d9268d3..24b7c51fbc 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_pla_ultimaker3_AA_0.4 weight = -2 -setting_version = 4 +material = generic_pla +variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height @@ -26,4 +27,3 @@ speed_wall = =math.ceil(speed_print * 55 / 70) speed_wall_0 = =math.ceil(speed_wall * 45 / 50) top_bottom_thickness = 1 wall_thickness = 1 - diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg index 30b7d44d4e..6b3d8642e0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_pla_ultimaker3_AA_0.4 weight = -1 -setting_version = 4 +material = generic_pla +variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height @@ -25,4 +26,3 @@ speed_wall = =math.ceil(speed_print * 40 / 80) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) top_bottom_thickness = 1 wall_thickness = 1 - diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg index da62ce2e3f..6009031e0c 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = high -material = generic_pla_ultimaker3_AA_0.4 weight = 1 -setting_version = 4 +material = generic_pla +variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height @@ -27,4 +28,3 @@ speed_topbottom = =math.ceil(speed_print * 30 / 60) speed_wall = =math.ceil(speed_print * 30 / 60) top_bottom_thickness = 1 wall_thickness = 1 - diff --git a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg index 04707735f5..3722134df6 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pla_ultimaker3_AA_0.4 weight = 0 -setting_version = 4 +material = generic_pla +variant = AA 0.4 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height @@ -23,4 +24,3 @@ skin_overlap = 10 speed_layer_0 = 20 top_bottom_thickness = 1 wall_thickness = 1 - diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg index 3fe25e563a..265e068598 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_pp_ultimaker3_AA_0.4 weight = -2 -setting_version = 4 +material = generic_pp +variant = AA 0.4 [values] acceleration_enabled = True @@ -63,4 +64,4 @@ switch_extruder_retraction_speeds = 35 travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =line_width -wall_thickness = =line_width * 3 \ No newline at end of file +wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg index 4c92c7a14b..7698c0a273 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_pp_ultimaker3_AA_0.4 weight = -1 -setting_version = 4 +material = generic_pp +variant = AA 0.4 [values] acceleration_enabled = True @@ -63,4 +64,4 @@ top_bottom_thickness = 1.1 travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =line_width -wall_thickness = =line_width * 3 \ No newline at end of file +wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg index db55956497..897ec993e7 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_pp_ultimaker3_AA_0.4 weight = 0 -setting_version = 4 +material = generic_pp +variant = AA 0.4 [values] acceleration_enabled = True @@ -62,4 +63,4 @@ top_bottom_thickness = 1 travel_avoid_distance = 3 wall_0_inset = 0 wall_line_width_x = =line_width -wall_thickness = =line_width * 3 \ No newline at end of file +wall_thickness = =line_width * 3 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg index f6828f88fb..d3654cb3e0 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_tpu_ultimaker3_AA_0.4 weight = -2 -setting_version = 4 +material = generic_tpu +variant = AA 0.4 [values] acceleration_enabled = True @@ -44,7 +45,7 @@ retraction_extrusion_window = 1 retraction_hop = 1.5 retraction_hop_enabled = True retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 +retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True @@ -62,4 +63,4 @@ top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 wall_line_width_x = =line_width -wall_thickness = 0.76 \ No newline at end of file +wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg index 80be26d24c..3686fefdff 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Normal definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = fast -material = generic_tpu_ultimaker3_AA_0.4 weight = -1 -setting_version = 4 +material = generic_tpu +variant = AA 0.4 [values] acceleration_enabled = True @@ -45,7 +46,7 @@ retraction_extrusion_window = 1 retraction_hop = 1.5 retraction_hop_enabled = True retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 +retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True @@ -63,4 +64,4 @@ top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 wall_line_width_x = =line_width -wall_thickness = 0.76 \ No newline at end of file +wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg index 53044e1805..18d7a5275a 100644 --- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg @@ -4,11 +4,12 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -material = generic_tpu_ultimaker3_AA_0.4 weight = 0 -setting_version = 4 +material = generic_tpu +variant = AA 0.4 [values] acceleration_enabled = True @@ -42,7 +43,7 @@ retraction_extrusion_window = 1 retraction_hop = 1.5 retraction_hop_enabled = True retraction_hop_only_when_collides = True -retraction_min_travel = 0.8 +retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_overlap = 5 speed_equalize_flow_enabled = True @@ -60,4 +61,4 @@ top_bottom_thickness = 0.7 travel_avoid_distance = 1.5 wall_0_inset = 0 wall_line_width_x = =line_width -wall_thickness = 0.76 \ No newline at end of file +wall_thickness = 0.76 diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg index 7c16e6e8ee..78930b84e2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_abs_ultimaker3_AA_0.8 weight = -2 -setting_version = 4 +material = generic_abs +variant = AA 0.8 [values] line_width = =machine_nozzle_size * 0.875 diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg index 728b4c868f..9470779bd4 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Superdraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Sprint definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_abs_ultimaker3_AA_0.8 weight = -4 -setting_version = 4 +material = generic_abs +variant = AA 0.8 [values] layer_height = 0.4 diff --git a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg index 98ae70c568..d28e9b75b6 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_ABS_Verydraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_abs_ultimaker3_AA_0.8 weight = -3 -setting_version = 4 +material = generic_abs +variant = AA 0.8 [values] layer_height = 0.3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg index 0a05e9aafd..6f84174c5a 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast - Experimental definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_cpe_plus_ultimaker3_AA_0.8 weight = -2 -setting_version = 4 +material = generic_cpe_plus +variant = AA 0.8 [values] brim_width = 14 @@ -35,4 +36,4 @@ support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 -travel_avoid_distance = 1.5 \ No newline at end of file +travel_avoid_distance = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg index 82efb6a57b..09e59ee8ca 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Superdraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Sprint - Experimental definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_cpe_plus_ultimaker3_AA_0.8 weight = -4 -setting_version = 4 +material = generic_cpe_plus +variant = AA 0.8 [values] brim_width = 14 @@ -36,4 +37,4 @@ support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 -travel_avoid_distance = 1.5 \ No newline at end of file +travel_avoid_distance = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg index ff375b6e49..7b7d211c21 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPEP_Verydraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fast - Experimental definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_cpe_plus_ultimaker3_AA_0.8 weight = -3 -setting_version = 4 +material = generic_cpe_plus +variant = AA 0.8 [values] brim_width = 14 @@ -36,4 +37,4 @@ support_bottom_distance = =support_z_distance support_line_width = =round(line_width * 0.6 / 0.7, 2) support_z_distance = =layer_height top_bottom_thickness = 1.2 -travel_avoid_distance = 1.5 \ No newline at end of file +travel_avoid_distance = 1.5 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg index b4d7035b8d..ecce20d9a2 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_cpe_ultimaker3_AA_0.8 weight = -2 -setting_version = 4 +material = generic_cpe +variant = AA 0.8 [values] brim_width = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg index b5ccc38534..a14d4601ee 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Superdraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Sprint definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_cpe_ultimaker3_AA_0.8 weight = -4 -setting_version = 4 +material = generic_cpe +variant = AA 0.8 [values] brim_width = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg index 33ae223526..7a6cbc7251 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_CPE_Verydraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_cpe_ultimaker3_AA_0.8 weight = -3 -setting_version = 4 +material = generic_cpe +variant = AA 0.8 [values] brim_width = 15 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg index 43ec77453c..9254894df3 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_nylon_ultimaker3_AA_0.8 weight = -2 -setting_version = 4 +material = generic_nylon +variant = AA 0.8 [values] brim_width = 5.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg index 5b8626e8c2..f6e2787e65 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Superdraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Sprint definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_nylon_ultimaker3_AA_0.8 weight = -4 -setting_version = 4 +material = generic_nylon +variant = AA 0.8 [values] brim_width = 5.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg index 0b115ada4b..794ccd006d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_Nylon_Verydraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_nylon_ultimaker3_AA_0.8 weight = -3 -setting_version = 4 +material = generic_nylon +variant = AA 0.8 [values] brim_width = 5.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg index 0b666d2e0b..c0ae3852dc 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Fast_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast - Experimental definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_pc_ultimaker3_AA_0.8 weight = 0 -setting_version = 4 +material = generic_pc +variant = AA 0.8 [values] brim_width = 14 @@ -28,4 +29,4 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) support_line_width = =round(line_width * 0.6 / 0.7, 2) -travel_avoid_distance = 3 \ No newline at end of file +travel_avoid_distance = 3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg index de212df4af..ca58342847 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Superdraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Sprint - Experimental definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_pc_ultimaker3_AA_0.8 weight = -2 -setting_version = 4 +material = generic_pc +variant = AA 0.8 [values] brim_width = 14 @@ -28,4 +29,4 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) support_line_width = =round(line_width * 0.6 / 0.7, 2) -travel_avoid_distance = 3 \ No newline at end of file +travel_avoid_distance = 3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg index 3e0c669eeb..6c69aa8ff5 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PC_Verydraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fast - Experimental definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_pc_ultimaker3_AA_0.8 weight = -1 -setting_version = 4 +material = generic_pc +variant = AA 0.8 [values] brim_width = 14 @@ -29,4 +30,4 @@ speed_topbottom = =math.ceil(speed_print * 25 / 50) speed_wall = =math.ceil(speed_print * 40 / 50) speed_wall_0 = =math.ceil(speed_wall * 30 / 40) support_line_width = =round(line_width * 0.6 / 0.7, 2) -travel_avoid_distance = 3 \ No newline at end of file +travel_avoid_distance = 3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg index 8b3c3e56c6..c03cc1ad5f 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_pla_ultimaker3_AA_0.8 weight = -2 -setting_version = 4 +material = generic_pla +variant = AA 0.8 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg index 2fe8f7c6f9..b1252a3662 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Superdraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Sprint definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_pla_ultimaker3_AA_0.8 weight = -4 -setting_version = 4 +material = generic_pla +variant = AA 0.8 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg index 9072e0c60f..191a7a4b1d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PLA_Verydraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_pla_ultimaker3_AA_0.8 weight = -3 -setting_version = 4 +material = generic_pla +variant = AA 0.8 [values] cool_fan_full_at_height = =layer_height_0 + 2 * layer_height diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg index f46c3cfb8f..fb67666dc7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_pp_ultimaker3_AA_0.8 weight = -2 -setting_version = 4 +material = generic_pp +variant = AA 0.8 [values] brim_width = 25 @@ -48,4 +49,4 @@ top_bottom_thickness = 1.6 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) -wall_thickness = 1.6 \ No newline at end of file +wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg index ac8087d0c4..0fe9eb2bf9 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Sprint definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_pp_ultimaker3_AA_0.8 weight = -4 -setting_version = 4 +material = generic_pp +variant = AA 0.8 [values] brim_width = 25 @@ -48,4 +49,4 @@ top_bottom_thickness = 1.6 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) -wall_thickness = 1.6 \ No newline at end of file +wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg index daf60f24e6..5ec1311987 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_pp_ultimaker3_AA_0.8 weight = -3 -setting_version = 4 +material = generic_pp +variant = AA 0.8 [values] brim_width = 25 @@ -48,4 +49,4 @@ top_bottom_thickness = 1.6 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.8 / 0.8, 2) -wall_thickness = 1.6 \ No newline at end of file +wall_thickness = 1.6 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg index d5d7479a0e..be3ea7e06d 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -material = generic_tpu_ultimaker3_AA_0.8 weight = -2 -setting_version = 4 +material = generic_tpu +variant = AA 0.8 [values] brim_width = 8.75 @@ -40,7 +41,7 @@ retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False -retraction_min_travel = 0.8 +retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 @@ -60,4 +61,4 @@ travel_avoid_distance = 1.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) -wall_thickness = 1.3 \ No newline at end of file +wall_thickness = 1.3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg index 86c6a3df77..cc0e963a35 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Sprint definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = superdraft -material = generic_tpu_ultimaker3_AA_0.8 weight = -4 -setting_version = 4 +material = generic_tpu +variant = AA 0.8 [values] brim_width = 8.75 @@ -41,7 +42,7 @@ retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False -retraction_min_travel = 0.8 +retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 @@ -61,4 +62,4 @@ travel_avoid_distance = 1.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) -wall_thickness = 1.3 \ No newline at end of file +wall_thickness = 1.3 diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg index 8af3edcddd..3310c09ba7 100644 --- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg @@ -4,11 +4,12 @@ name = Extra Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = verydraft -material = generic_tpu_ultimaker3_AA_0.8 weight = -3 -setting_version = 4 +material = generic_tpu +variant = AA 0.8 [values] brim_width = 8.75 @@ -40,7 +41,7 @@ retraction_count_max = 12 retraction_extra_prime_amount = 0.5 retraction_hop = 1.5 retraction_hop_only_when_collides = False -retraction_min_travel = 0.8 +retraction_min_travel = =line_width * 2 retraction_prime_speed = 15 skin_line_width = =round(line_width * 0.78 / 0.8, 2) speed_print = 30 @@ -60,4 +61,4 @@ travel_avoid_distance = 1.5 travel_compensate_overlapping_walls_0_enabled = False wall_0_wipe_dist = =line_width * 2 wall_line_width_x = =round(line_width * 0.6 / 0.8, 2) -wall_thickness = 1.3 \ No newline at end of file +wall_thickness = 1.3 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg index c87f744932..eacdaccffe 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg @@ -4,14 +4,15 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft weight = -2 -material = generic_pva_ultimaker3_BB_0.4 -setting_version = 4 +material = generic_pva +variant = BB 0.4 [values] material_print_temperature = =default_material_print_temperature + 10 material_standby_temperature = 100 prime_tower_enable = False -skin_overlap = 20 \ No newline at end of file +skin_overlap = 20 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg index 23fa6d61d8..c6ddd85181 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg @@ -4,15 +4,16 @@ name = Normal definition = ultimaker3 [metadata] -weight = -1 +setting_version = 4 type = quality quality_type = fast -material = generic_pva_ultimaker3_BB_0.4 -setting_version = 4 +weight = -1 +material = generic_pva +variant = BB 0.4 [values] material_print_temperature = =default_material_print_temperature + 5 material_standby_temperature = 100 prime_tower_enable = False skin_overlap = 15 -support_infill_sparse_thickness = 0.3 \ No newline at end of file +support_infill_sparse_thickness = 0.3 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg index 3ba82d65c6..0b1d0f9f8d 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg @@ -4,13 +4,14 @@ name = Extra Fine definition = ultimaker3 [metadata] -weight = 1 +setting_version = 4 type = quality quality_type = high -material = generic_pva_ultimaker3_BB_0.4 -setting_version = 4 +weight = 1 +material = generic_pva +variant = BB 0.4 [values] material_standby_temperature = 100 prime_tower_enable = False -support_infill_sparse_thickness = 0.18 \ No newline at end of file +support_infill_sparse_thickness = 0.18 diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg index a709d5613b..9980e2b31c 100644 --- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg @@ -4,12 +4,13 @@ name = Fine definition = ultimaker3 [metadata] -weight = 0 +setting_version = 4 type = quality quality_type = normal -material = generic_pva_ultimaker3_BB_0.4 -setting_version = 4 +weight = 0 +material = generic_pva +variant = BB 0.4 [values] material_standby_temperature = 100 -prime_tower_enable = False \ No newline at end of file +prime_tower_enable = False diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg index 4cb296b4c7..edc960cc8c 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg @@ -4,12 +4,13 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft weight = -2 -material = generic_pva_ultimaker3_BB_0.8 -setting_version = 4 +material = generic_pva +variant = BB 0.8 [values] material_print_temperature = =default_material_print_temperature + 5 -material_standby_temperature = 100 \ No newline at end of file +material_standby_temperature = 100 diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg index 5249517844..6fb66dab14 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg @@ -4,13 +4,14 @@ name = Sprint definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = superdraft weight = -4 -material = generic_pva_ultimaker3_BB_0.8 -setting_version = 4 +material = generic_pva +variant = BB 0.8 [values] layer_height = 0.4 material_standby_temperature = 100 -support_interface_height = 0.9 \ No newline at end of file +support_interface_height = 0.9 diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg index c34e19b134..12288919fe 100644 --- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg +++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg @@ -4,14 +4,15 @@ name = Extra Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = verydraft weight = -3 -material = generic_pva_ultimaker3_BB_0.8 -setting_version = 4 +material = generic_pva +variant = BB 0.8 [values] layer_height = 0.3 material_standby_temperature = 100 support_infill_sparse_thickness = 0.3 -support_interface_height = 1.2 \ No newline at end of file +support_interface_height = 1.2 diff --git a/resources/quality/ultimaker3/um3_global_Draft_Quality.inst.cfg b/resources/quality/ultimaker3/um3_global_Draft_Quality.inst.cfg index b56775a987..9f13bbd3c2 100644 --- a/resources/quality/ultimaker3/um3_global_Draft_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_global_Draft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = draft -global_quality = True weight = -2 -setting_version = 4 +global_quality = True [values] layer_height = 0.2 diff --git a/resources/quality/ultimaker3/um3_global_Fast_Quality.inst.cfg b/resources/quality/ultimaker3/um3_global_Fast_Quality.inst.cfg index 12f1183364..073ae82a07 100644 --- a/resources/quality/ultimaker3/um3_global_Fast_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_global_Fast_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = fast -global_quality = True weight = -1 -setting_version = 4 +global_quality = True [values] layer_height = 0.15 diff --git a/resources/quality/ultimaker3/um3_global_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_global_High_Quality.inst.cfg index cf6e6c45e0..1daff86c49 100644 --- a/resources/quality/ultimaker3/um3_global_High_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_global_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Extra Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = high -global_quality = True weight = 0 -setting_version = 4 +global_quality = True [values] layer_height = 0.06 diff --git a/resources/quality/ultimaker3/um3_global_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_global_Normal_Quality.inst.cfg index fef2328923..91c5bab8b7 100644 --- a/resources/quality/ultimaker3/um3_global_Normal_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_global_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Fine definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = normal -global_quality = True weight = 0 -setting_version = 4 +global_quality = True [values] layer_height = 0.1 diff --git a/resources/quality/ultimaker3/um3_global_Superdraft_Quality.inst.cfg b/resources/quality/ultimaker3/um3_global_Superdraft_Quality.inst.cfg index be9acd4394..da39b065d5 100644 --- a/resources/quality/ultimaker3/um3_global_Superdraft_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_global_Superdraft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Sprint definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = superdraft -global_quality = True weight = -4 -setting_version = 4 +global_quality = True [values] layer_height = 0.4 diff --git a/resources/quality/ultimaker3/um3_global_Verydraft_Quality.inst.cfg b/resources/quality/ultimaker3/um3_global_Verydraft_Quality.inst.cfg index e2c828fc2d..11e8315a7b 100644 --- a/resources/quality/ultimaker3/um3_global_Verydraft_Quality.inst.cfg +++ b/resources/quality/ultimaker3/um3_global_Verydraft_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Extra Fast definition = ultimaker3 [metadata] +setting_version = 4 type = quality quality_type = verydraft -global_quality = True weight = -3 -setting_version = 4 +global_quality = True [values] layer_height = 0.3 diff --git a/resources/quality/vertex_delta_k8800/k8800_ABS_Extreme_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_ABS_Extreme_Quality.inst.cfg index 2c42bd82b6..50a1ef3415 100644 --- a/resources/quality/vertex_delta_k8800/k8800_ABS_Extreme_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_ABS_Extreme_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Extreme definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = extreme -material = Vertex_Delta_ABS weight = 2 -setting_version = 4 +material = Vertex_Delta_ABS [values] layer_height = 0.05 @@ -19,4 +19,4 @@ material_initial_print_temperature = 250 material_print_temperature = 250 retraction_amount = 3 material_standby_temperature = 225 -cool_fan_speed = 0 \ No newline at end of file +cool_fan_speed = 0 diff --git a/resources/quality/vertex_delta_k8800/k8800_ABS_High_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_ABS_High_Quality.inst.cfg index a770131adb..e650f11afd 100644 --- a/resources/quality/vertex_delta_k8800/k8800_ABS_High_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_ABS_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = high -material = Vertex_Delta_ABS weight = 1 -setting_version = 4 +material = Vertex_Delta_ABS [values] layer_height = 0.1 @@ -19,4 +19,4 @@ material_initial_print_temperature = 250 material_print_temperature = 250 retraction_amount = 3 material_standby_temperature = 225 -cool_fan_speed = 0 \ No newline at end of file +cool_fan_speed = 0 diff --git a/resources/quality/vertex_delta_k8800/k8800_ABS_Normal_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_ABS_Normal_Quality.inst.cfg index 7c7e635149..aa962190ce 100644 --- a/resources/quality/vertex_delta_k8800/k8800_ABS_Normal_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_ABS_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = normal -material = Vertex_Delta_ABS weight = 0 -setting_version = 4 +material = Vertex_Delta_ABS [values] layer_height = 0.2 @@ -19,4 +19,4 @@ material_initial_print_temperature = 250 material_print_temperature = 250 retraction_amount = 3 material_standby_temperature = 225 -cool_fan_speed = 00 \ No newline at end of file +cool_fan_speed = 00 diff --git a/resources/quality/vertex_delta_k8800/k8800_PET_Extreme_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_PET_Extreme_Quality.inst.cfg index 836d900247..29a4170adf 100644 --- a/resources/quality/vertex_delta_k8800/k8800_PET_Extreme_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_PET_Extreme_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Extreme definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = extreme -material = Vertex_Delta_PET weight = 2 -setting_version = 4 +material = Vertex_Delta_PET [values] layer_height = 0.05 @@ -19,4 +19,4 @@ material_initial_print_temperature = 240 material_print_temperature = 240 retraction_amount = 3 material_standby_temperature = 215 -cool_fan_speed = 10 \ No newline at end of file +cool_fan_speed = 10 diff --git a/resources/quality/vertex_delta_k8800/k8800_PET_High_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_PET_High_Quality.inst.cfg index b0cae312b2..fc92590da1 100644 --- a/resources/quality/vertex_delta_k8800/k8800_PET_High_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_PET_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = high -material = Vertex_Delta_PET weight = 1 -setting_version = 4 +material = Vertex_Delta_PET [values] layer_height = 0.1 @@ -19,4 +19,4 @@ material_initial_print_temperature = 240 material_print_temperature = 240 retraction_amount = 3 material_standby_temperature = 215 -cool_fan_speed = 10 \ No newline at end of file +cool_fan_speed = 10 diff --git a/resources/quality/vertex_delta_k8800/k8800_PET_Normal_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_PET_Normal_Quality.inst.cfg index ebec26d04a..b02bfa5178 100644 --- a/resources/quality/vertex_delta_k8800/k8800_PET_Normal_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_PET_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = normal -material = Vertex_Delta_PET weight = 0 -setting_version = 4 +material = Vertex_Delta_PET [values] layer_height = 0.2 @@ -19,4 +19,4 @@ material_initial_print_temperature = 240 material_print_temperature = 240 retraction_amount = 3 material_standby_temperature = 215 -cool_fan_speed = 10 \ No newline at end of file +cool_fan_speed = 10 diff --git a/resources/quality/vertex_delta_k8800/k8800_PLA_Extreme_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_PLA_Extreme_Quality.inst.cfg index 13ad6455c9..3cdad7a06f 100644 --- a/resources/quality/vertex_delta_k8800/k8800_PLA_Extreme_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_PLA_Extreme_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Extreme definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = extreme -material = Vertex_Delta_PLA weight = 2 -setting_version = 4 +material = Vertex_Delta_PLA [values] layer_height = 0.05 @@ -19,4 +19,4 @@ material_initial_print_temperature = 200 material_print_temperature = 200 retraction_amount = 3 material_standby_temperature = 175 -cool_fan_speed = 40 \ No newline at end of file +cool_fan_speed = 40 diff --git a/resources/quality/vertex_delta_k8800/k8800_PLA_High_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_PLA_High_Quality.inst.cfg index e8c7e893cb..192750ef71 100644 --- a/resources/quality/vertex_delta_k8800/k8800_PLA_High_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_PLA_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = high -material = Vertex_Delta_PLA weight = 1 -setting_version = 4 +material = Vertex_Delta_PLA [values] layer_height = 0.1 @@ -19,4 +19,4 @@ material_initial_print_temperature = 200 material_print_temperature = 200 retraction_amount = 3 material_standby_temperature = 175 -cool_fan_speed = 40 \ No newline at end of file +cool_fan_speed = 40 diff --git a/resources/quality/vertex_delta_k8800/k8800_PLA_Normal_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_PLA_Normal_Quality.inst.cfg index 27002caea2..1e519734bb 100644 --- a/resources/quality/vertex_delta_k8800/k8800_PLA_Normal_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_PLA_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = normal -material = Vertex_Delta_PLA weight = 0 -setting_version = 4 +material = Vertex_Delta_PLA [values] layer_height = 0.2 @@ -19,4 +19,4 @@ material_initial_print_temperature = 200 material_print_temperature = 200 retraction_amount = 3 material_standby_temperature = 175 -cool_fan_speed = 40 \ No newline at end of file +cool_fan_speed = 40 diff --git a/resources/quality/vertex_delta_k8800/k8800_TPU_Extreme_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_TPU_Extreme_Quality.inst.cfg index 8a0a01fb0b..9da37f2148 100644 --- a/resources/quality/vertex_delta_k8800/k8800_TPU_Extreme_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_TPU_Extreme_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Extreme definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = extreme -material = Vertex_Delta_TPU weight = 2 -setting_version = 4 +material = Vertex_Delta_TPU [values] layer_height = 0.05 @@ -19,4 +19,4 @@ material_initial_print_temperature = 220 material_print_temperature = 220 retraction_amount = 3 material_standby_temperature = 195 -cool_fan_speed = 20 \ No newline at end of file +cool_fan_speed = 20 diff --git a/resources/quality/vertex_delta_k8800/k8800_TPU_High_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_TPU_High_Quality.inst.cfg index 7e23947f39..f5583d32b9 100644 --- a/resources/quality/vertex_delta_k8800/k8800_TPU_High_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_TPU_High_Quality.inst.cfg @@ -4,11 +4,11 @@ name = High definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = high -material = Vertex_Delta_TPU weight = 1 -setting_version = 4 +material = Vertex_Delta_TPU [values] layer_height = 0.1 @@ -19,4 +19,4 @@ material_initial_print_temperature = 220 material_print_temperature = 220 retraction_amount = 3 material_standby_temperature = 195 -cool_fan_speed = 20 \ No newline at end of file +cool_fan_speed = 20 diff --git a/resources/quality/vertex_delta_k8800/k8800_TPU_Normal_Quality.inst.cfg b/resources/quality/vertex_delta_k8800/k8800_TPU_Normal_Quality.inst.cfg index 5fb46e1ea6..a520eb2473 100644 --- a/resources/quality/vertex_delta_k8800/k8800_TPU_Normal_Quality.inst.cfg +++ b/resources/quality/vertex_delta_k8800/k8800_TPU_Normal_Quality.inst.cfg @@ -4,11 +4,11 @@ name = Normal definition = vertex_delta_k8800 [metadata] +setting_version = 4 type = quality quality_type = normal -material = Vertex_Delta_TPU weight = 0 -setting_version = 4 +material = Vertex_Delta_TPU [values] layer_height = 0.2 diff --git a/resources/variants/cartesio_0.25.inst.cfg b/resources/variants/cartesio_0.25.inst.cfg index 0cc01093f2..014069451c 100644 --- a/resources/variants/cartesio_0.25.inst.cfg +++ b/resources/variants/cartesio_0.25.inst.cfg @@ -5,8 +5,8 @@ definition = cartesio [metadata] author = Cartesio -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/cartesio_0.4.inst.cfg b/resources/variants/cartesio_0.4.inst.cfg index 9920e699f5..7b5dccd980 100644 --- a/resources/variants/cartesio_0.4.inst.cfg +++ b/resources/variants/cartesio_0.4.inst.cfg @@ -5,8 +5,8 @@ definition = cartesio [metadata] author = Cartesio -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/cartesio_0.8.inst.cfg b/resources/variants/cartesio_0.8.inst.cfg index 8031a9fa31..70271dbf75 100644 --- a/resources/variants/cartesio_0.8.inst.cfg +++ b/resources/variants/cartesio_0.8.inst.cfg @@ -5,8 +5,8 @@ definition = cartesio [metadata] author = Cartesio -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/fabtotum_hyb35.inst.cfg b/resources/variants/fabtotum_hyb35.inst.cfg index e8fa13cc0d..e036b2e474 100644 --- a/resources/variants/fabtotum_hyb35.inst.cfg +++ b/resources/variants/fabtotum_hyb35.inst.cfg @@ -5,8 +5,8 @@ definition = fabtotum [metadata] author = FABtotum -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/fabtotum_lite04.inst.cfg b/resources/variants/fabtotum_lite04.inst.cfg index 7264abbdda..defa6692a8 100644 --- a/resources/variants/fabtotum_lite04.inst.cfg +++ b/resources/variants/fabtotum_lite04.inst.cfg @@ -5,8 +5,8 @@ definition = fabtotum [metadata] author = FABtotum -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/fabtotum_lite06.inst.cfg b/resources/variants/fabtotum_lite06.inst.cfg index 0ad33ca332..d269092b42 100644 --- a/resources/variants/fabtotum_lite06.inst.cfg +++ b/resources/variants/fabtotum_lite06.inst.cfg @@ -5,8 +5,8 @@ definition = fabtotum [metadata] author = FABtotum -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/fabtotum_pro02.inst.cfg b/resources/variants/fabtotum_pro02.inst.cfg index d83618b712..b705929c35 100644 --- a/resources/variants/fabtotum_pro02.inst.cfg +++ b/resources/variants/fabtotum_pro02.inst.cfg @@ -5,8 +5,8 @@ definition = fabtotum [metadata] author = FABtotum -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/fabtotum_pro04.inst.cfg b/resources/variants/fabtotum_pro04.inst.cfg index 4f2a622887..b835312324 100644 --- a/resources/variants/fabtotum_pro04.inst.cfg +++ b/resources/variants/fabtotum_pro04.inst.cfg @@ -5,8 +5,8 @@ definition = fabtotum [metadata] author = FABtotum -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/fabtotum_pro06.inst.cfg b/resources/variants/fabtotum_pro06.inst.cfg index aa44e762ba..140b6618cf 100644 --- a/resources/variants/fabtotum_pro06.inst.cfg +++ b/resources/variants/fabtotum_pro06.inst.cfg @@ -5,8 +5,8 @@ definition = fabtotum [metadata] author = FABtotum -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/fabtotum_pro08.inst.cfg b/resources/variants/fabtotum_pro08.inst.cfg index 597d23275e..421cd0b662 100644 --- a/resources/variants/fabtotum_pro08.inst.cfg +++ b/resources/variants/fabtotum_pro08.inst.cfg @@ -5,8 +5,8 @@ definition = fabtotum [metadata] author = FABtotum -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/gmax15plus_025_e3d.inst.cfg b/resources/variants/gmax15plus_025_e3d.inst.cfg index 0500a63638..3c7b2e4949 100644 --- a/resources/variants/gmax15plus_025_e3d.inst.cfg +++ b/resources/variants/gmax15plus_025_e3d.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.25 diff --git a/resources/variants/gmax15plus_04_e3d.inst.cfg b/resources/variants/gmax15plus_04_e3d.inst.cfg index 514893a8a5..e9c0cf1b18 100644 --- a/resources/variants/gmax15plus_04_e3d.inst.cfg +++ b/resources/variants/gmax15plus_04_e3d.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.4 diff --git a/resources/variants/gmax15plus_05_e3d.inst.cfg b/resources/variants/gmax15plus_05_e3d.inst.cfg index 2579409d5a..8575f3c539 100644 --- a/resources/variants/gmax15plus_05_e3d.inst.cfg +++ b/resources/variants/gmax15plus_05_e3d.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.5 diff --git a/resources/variants/gmax15plus_05_jhead.inst.cfg b/resources/variants/gmax15plus_05_jhead.inst.cfg index ca107c9559..14d6ab5e9d 100644 --- a/resources/variants/gmax15plus_05_jhead.inst.cfg +++ b/resources/variants/gmax15plus_05_jhead.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.5 diff --git a/resources/variants/gmax15plus_06_e3d.inst.cfg b/resources/variants/gmax15plus_06_e3d.inst.cfg index eb709f1487..5d3f5c63a9 100644 --- a/resources/variants/gmax15plus_06_e3d.inst.cfg +++ b/resources/variants/gmax15plus_06_e3d.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.6 diff --git a/resources/variants/gmax15plus_08_e3d.inst.cfg b/resources/variants/gmax15plus_08_e3d.inst.cfg index 093bce99c0..af08cd2c7c 100644 --- a/resources/variants/gmax15plus_08_e3d.inst.cfg +++ b/resources/variants/gmax15plus_08_e3d.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.8 diff --git a/resources/variants/gmax15plus_10_jhead.inst.cfg b/resources/variants/gmax15plus_10_jhead.inst.cfg index 977469e304..df61d9729f 100644 --- a/resources/variants/gmax15plus_10_jhead.inst.cfg +++ b/resources/variants/gmax15plus_10_jhead.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.5 diff --git a/resources/variants/gmax15plus_dual_025_e3d.inst.cfg b/resources/variants/gmax15plus_dual_025_e3d.inst.cfg index b083174beb..07bdfca9b7 100644 --- a/resources/variants/gmax15plus_dual_025_e3d.inst.cfg +++ b/resources/variants/gmax15plus_dual_025_e3d.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus_dual [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.25 diff --git a/resources/variants/gmax15plus_dual_04_e3d.inst.cfg b/resources/variants/gmax15plus_dual_04_e3d.inst.cfg index f1a95f4f2a..966fe9f224 100644 --- a/resources/variants/gmax15plus_dual_04_e3d.inst.cfg +++ b/resources/variants/gmax15plus_dual_04_e3d.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus_dual [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.4 diff --git a/resources/variants/gmax15plus_dual_05_e3d.inst.cfg b/resources/variants/gmax15plus_dual_05_e3d.inst.cfg index dd148f8082..85464bd733 100644 --- a/resources/variants/gmax15plus_dual_05_e3d.inst.cfg +++ b/resources/variants/gmax15plus_dual_05_e3d.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus_dual [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.5 diff --git a/resources/variants/gmax15plus_dual_05_jhead.inst.cfg b/resources/variants/gmax15plus_dual_05_jhead.inst.cfg index 7e038a3980..689c76541a 100644 --- a/resources/variants/gmax15plus_dual_05_jhead.inst.cfg +++ b/resources/variants/gmax15plus_dual_05_jhead.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus_dual [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.5 diff --git a/resources/variants/gmax15plus_dual_06_e3d.inst.cfg b/resources/variants/gmax15plus_dual_06_e3d.inst.cfg index 93cf21780f..57641a4244 100644 --- a/resources/variants/gmax15plus_dual_06_e3d.inst.cfg +++ b/resources/variants/gmax15plus_dual_06_e3d.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus_dual [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.6 diff --git a/resources/variants/gmax15plus_dual_08_e3d.inst.cfg b/resources/variants/gmax15plus_dual_08_e3d.inst.cfg index 3088113f27..11523ccd67 100644 --- a/resources/variants/gmax15plus_dual_08_e3d.inst.cfg +++ b/resources/variants/gmax15plus_dual_08_e3d.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus_dual [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.8 diff --git a/resources/variants/gmax15plus_dual_10_jhead.inst.cfg b/resources/variants/gmax15plus_dual_10_jhead.inst.cfg index a526cc676e..26721d0169 100644 --- a/resources/variants/gmax15plus_dual_10_jhead.inst.cfg +++ b/resources/variants/gmax15plus_dual_10_jhead.inst.cfg @@ -5,8 +5,9 @@ definition = gmax15plus_dual [metadata] author = gcreate -type = variant setting_version = 4 +type = variant +hardware_type = nozzle [values] machine_nozzle_size = 0.5 diff --git a/resources/variants/imade3d_jellybox_0.4.inst.cfg b/resources/variants/imade3d_jellybox_0.4.inst.cfg index c37a2ecabf..5baa8123f2 100644 --- a/resources/variants/imade3d_jellybox_0.4.inst.cfg +++ b/resources/variants/imade3d_jellybox_0.4.inst.cfg @@ -5,8 +5,8 @@ definition = imade3d_jellybox [metadata] author = IMADE3D -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/imade3d_jellybox_0.4_2-fans.inst.cfg b/resources/variants/imade3d_jellybox_0.4_2-fans.inst.cfg index c3e63aab34..5d1a01c366 100644 --- a/resources/variants/imade3d_jellybox_0.4_2-fans.inst.cfg +++ b/resources/variants/imade3d_jellybox_0.4_2-fans.inst.cfg @@ -5,8 +5,8 @@ definition = imade3d_jellybox [metadata] author = IMADE3D -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_0.25.inst.cfg b/resources/variants/ultimaker2_0.25.inst.cfg index aee83e2483..2b1b04f123 100644 --- a/resources/variants/ultimaker2_0.25.inst.cfg +++ b/resources/variants/ultimaker2_0.25.inst.cfg @@ -4,12 +4,11 @@ version = 2 definition = ultimaker2 [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] machine_nozzle_size = 0.25 machine_nozzle_tip_outer_diameter = 0.8 -raft_airgap = 0.25 \ No newline at end of file +raft_airgap = 0.25 diff --git a/resources/variants/ultimaker2_0.4.inst.cfg b/resources/variants/ultimaker2_0.4.inst.cfg index fe128137d9..8886992f6f 100644 --- a/resources/variants/ultimaker2_0.4.inst.cfg +++ b/resources/variants/ultimaker2_0.4.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2 [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_0.6.inst.cfg b/resources/variants/ultimaker2_0.6.inst.cfg index 7fea2fbb22..42de9d3ee8 100644 --- a/resources/variants/ultimaker2_0.6.inst.cfg +++ b/resources/variants/ultimaker2_0.6.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2 [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_0.8.inst.cfg b/resources/variants/ultimaker2_0.8.inst.cfg index 5f1176b7ec..df2ca88ba2 100644 --- a/resources/variants/ultimaker2_0.8.inst.cfg +++ b/resources/variants/ultimaker2_0.8.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2 [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_extended_0.25.inst.cfg b/resources/variants/ultimaker2_extended_0.25.inst.cfg index e705327cf8..f04a28e5ba 100644 --- a/resources/variants/ultimaker2_extended_0.25.inst.cfg +++ b/resources/variants/ultimaker2_extended_0.25.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_extended [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_extended_0.4.inst.cfg b/resources/variants/ultimaker2_extended_0.4.inst.cfg index d486ed4f4e..c54202750a 100644 --- a/resources/variants/ultimaker2_extended_0.4.inst.cfg +++ b/resources/variants/ultimaker2_extended_0.4.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_extended [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_extended_0.6.inst.cfg b/resources/variants/ultimaker2_extended_0.6.inst.cfg index f9dd4d4e69..67176632aa 100644 --- a/resources/variants/ultimaker2_extended_0.6.inst.cfg +++ b/resources/variants/ultimaker2_extended_0.6.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_extended [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_extended_0.8.inst.cfg b/resources/variants/ultimaker2_extended_0.8.inst.cfg index ee56b6d194..61917309ef 100644 --- a/resources/variants/ultimaker2_extended_0.8.inst.cfg +++ b/resources/variants/ultimaker2_extended_0.8.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_extended [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_extended_plus_0.25.inst.cfg b/resources/variants/ultimaker2_extended_plus_0.25.inst.cfg index f23406fec3..6386d71f50 100644 --- a/resources/variants/ultimaker2_extended_plus_0.25.inst.cfg +++ b/resources/variants/ultimaker2_extended_plus_0.25.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_extended_plus [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_extended_plus_0.4.inst.cfg b/resources/variants/ultimaker2_extended_plus_0.4.inst.cfg index c0b1c6ab79..1426f733cc 100644 --- a/resources/variants/ultimaker2_extended_plus_0.4.inst.cfg +++ b/resources/variants/ultimaker2_extended_plus_0.4.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_extended_plus [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_extended_plus_0.6.inst.cfg b/resources/variants/ultimaker2_extended_plus_0.6.inst.cfg index 6ef64bed5f..5ea4072022 100644 --- a/resources/variants/ultimaker2_extended_plus_0.6.inst.cfg +++ b/resources/variants/ultimaker2_extended_plus_0.6.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_extended_plus [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_extended_plus_0.8.inst.cfg b/resources/variants/ultimaker2_extended_plus_0.8.inst.cfg index 2f890d0827..69b2b9b0d0 100644 --- a/resources/variants/ultimaker2_extended_plus_0.8.inst.cfg +++ b/resources/variants/ultimaker2_extended_plus_0.8.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_extended_plus [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_plus_0.25.inst.cfg b/resources/variants/ultimaker2_plus_0.25.inst.cfg index 1c4688568d..2b40656cf4 100644 --- a/resources/variants/ultimaker2_plus_0.25.inst.cfg +++ b/resources/variants/ultimaker2_plus_0.25.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_plus [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_plus_0.4.inst.cfg b/resources/variants/ultimaker2_plus_0.4.inst.cfg index 00a4ef47dd..0aaf4f4e5a 100644 --- a/resources/variants/ultimaker2_plus_0.4.inst.cfg +++ b/resources/variants/ultimaker2_plus_0.4.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_plus [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_plus_0.6.inst.cfg b/resources/variants/ultimaker2_plus_0.6.inst.cfg index 4dceab70d0..7988a949bc 100644 --- a/resources/variants/ultimaker2_plus_0.6.inst.cfg +++ b/resources/variants/ultimaker2_plus_0.6.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_plus [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker2_plus_0.8.inst.cfg b/resources/variants/ultimaker2_plus_0.8.inst.cfg index e1bbddb823..1a7824b0b1 100644 --- a/resources/variants/ultimaker2_plus_0.8.inst.cfg +++ b/resources/variants/ultimaker2_plus_0.8.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker2_plus [metadata] -author = Ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker3_aa0.25.inst.cfg b/resources/variants/ultimaker3_aa0.25.inst.cfg index 2d2d893202..8f06e73f91 100644 --- a/resources/variants/ultimaker3_aa0.25.inst.cfg +++ b/resources/variants/ultimaker3_aa0.25.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker3 [metadata] -author = ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker3_aa0.8.inst.cfg b/resources/variants/ultimaker3_aa0.8.inst.cfg index 402190c357..218c1ea3bf 100644 --- a/resources/variants/ultimaker3_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_aa0.8.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker3 [metadata] -author = ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker3_aa04.inst.cfg b/resources/variants/ultimaker3_aa04.inst.cfg index 0163024fa4..2964ab74a0 100644 --- a/resources/variants/ultimaker3_aa04.inst.cfg +++ b/resources/variants/ultimaker3_aa04.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker3 [metadata] -author = ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] @@ -40,4 +39,3 @@ switch_extruder_prime_speed = =switch_extruder_retraction_speeds switch_extruder_retraction_amount = =machine_heat_zone_length top_bottom_thickness = 1.2 wall_thickness = 1.3 - diff --git a/resources/variants/ultimaker3_bb0.8.inst.cfg b/resources/variants/ultimaker3_bb0.8.inst.cfg index 017da649a0..03b38f225c 100644 --- a/resources/variants/ultimaker3_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_bb0.8.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker3 [metadata] -author = ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker3_bb04.inst.cfg b/resources/variants/ultimaker3_bb04.inst.cfg index 93b2025031..78d201318d 100644 --- a/resources/variants/ultimaker3_bb04.inst.cfg +++ b/resources/variants/ultimaker3_bb04.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker3 [metadata] -author = ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] @@ -47,4 +46,4 @@ support_line_width = =round(line_width * 0.4 / 0.35, 2) support_offset = 3 support_xy_distance = =round(wall_line_width_0 * 0.75, 2) support_xy_distance_overhang = =wall_line_width_0 / 2 -switch_extruder_retraction_amount = 12 \ No newline at end of file +switch_extruder_retraction_amount = 12 diff --git a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg index 04d7a7990a..f45d90b762 100644 --- a/resources/variants/ultimaker3_extended_aa0.25.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.25.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker3_extended [metadata] -author = ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] @@ -38,4 +37,3 @@ support_z_distance = =layer_height * 2 top_bottom_thickness = 1.2 wall_line_width_x = 0.23 wall_thickness = 1.3 - diff --git a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg index 3e1b3ed3de..1f5709e504 100644 --- a/resources/variants/ultimaker3_extended_aa0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa0.8.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker3_extended [metadata] -author = ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker3_extended_aa04.inst.cfg b/resources/variants/ultimaker3_extended_aa04.inst.cfg index 94bee65b5d..4d9d2b4646 100644 --- a/resources/variants/ultimaker3_extended_aa04.inst.cfg +++ b/resources/variants/ultimaker3_extended_aa04.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker3_extended [metadata] -author = ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg index e1086535ec..752083f42a 100644 --- a/resources/variants/ultimaker3_extended_bb0.8.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb0.8.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker3_extended [metadata] -author = ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] diff --git a/resources/variants/ultimaker3_extended_bb04.inst.cfg b/resources/variants/ultimaker3_extended_bb04.inst.cfg index a995acf77c..1ceaf58c5b 100644 --- a/resources/variants/ultimaker3_extended_bb04.inst.cfg +++ b/resources/variants/ultimaker3_extended_bb04.inst.cfg @@ -4,9 +4,8 @@ version = 2 definition = ultimaker3_extended [metadata] -author = ultimaker -type = variant setting_version = 4 +type = variant hardware_type = nozzle [values] @@ -47,4 +46,4 @@ support_line_width = =round(line_width * 0.4 / 0.35, 2) support_offset = 3 support_xy_distance = =round(wall_line_width_0 * 0.75, 2) support_xy_distance_overhang = =wall_line_width_0 / 2 -switch_extruder_retraction_amount = 12 \ No newline at end of file +switch_extruder_retraction_amount = 12 diff --git a/tests/Settings/TestExtruderStack.py b/tests/Settings/TestExtruderStack.py index e1538cd3fc..ce829da4b3 100644 --- a/tests/Settings/TestExtruderStack.py +++ b/tests/Settings/TestExtruderStack.py @@ -325,30 +325,6 @@ def test_removeContainer(extruder_stack): with pytest.raises(InvalidOperationError): extruder_stack.removeContainer(unittest.mock.MagicMock()) -## Tests setting definitions by specifying an ID of a definition that exists. -def test_setDefinitionByIdExists(extruder_stack, container_registry): - container_registry.return_value = DefinitionContainer(container_id = "some_definition") - extruder_stack.setDefinitionById("some_definition") - assert extruder_stack.definition.getId() == "some_definition" - -## Tests setting definitions by specifying an ID of a definition that doesn't -# exist. -def test_setDefinitionByIdDoesntExist(extruder_stack): - with pytest.raises(InvalidContainerError): - extruder_stack.setDefinitionById("some_definition") #Container registry is empty now. - -## Tests setting materials by specifying an ID of a material that exists. -def test_setMaterialByIdExists(extruder_stack, container_registry): - container_registry.return_value = getInstanceContainer(container_type = "material") - extruder_stack.setMaterialById("InstanceContainer") - assert extruder_stack.material.getId() == "InstanceContainer" - -## Tests setting materials by specifying an ID of a material that doesn't -# exist. -def test_setMaterialByIdDoesntExist(extruder_stack): - with pytest.raises(InvalidContainerError): - extruder_stack.setMaterialById("some_material") #Container registry is empty now. - ## Tests setting properties directly on the extruder stack. @pytest.mark.parametrize("key, property, value", [ ("layer_height", "value", 0.1337), @@ -387,38 +363,3 @@ def test_setPropertyOtherContainers(target_container, stack_variable, extruder_s extruder_stack.setProperty(key, property, value, target_container = target_container) #The actual test. getattr(extruder_stack, stack_variable).setProperty.assert_called_once_with(key, property, value) #Make sure that the proper container gets a setProperty call. - -## Tests setting qualities by specifying an ID of a quality that exists. -def test_setQualityByIdExists(extruder_stack, container_registry): - container_registry.return_value = getInstanceContainer(container_type = "quality") - extruder_stack.setQualityById("InstanceContainer") - assert extruder_stack.quality.getId() == "InstanceContainer" - -## Tests setting qualities by specifying an ID of a quality that doesn't exist. -def test_setQualityByIdDoesntExist(extruder_stack): - with pytest.raises(InvalidContainerError): - extruder_stack.setQualityById("some_quality") #Container registry is empty now. - -## Tests setting quality changes by specifying an ID of a quality change that -# exists. -def test_setQualityChangesByIdExists(extruder_stack, container_registry): - container_registry.return_value = getInstanceContainer(container_type = "quality_changes") - extruder_stack.setQualityChangesById("InstanceContainer") - assert extruder_stack.qualityChanges.getId() == "InstanceContainer" - -## Tests setting quality changes by specifying an ID of a quality change that -# doesn't exist. -def test_setQualityChangesByIdDoesntExist(extruder_stack): - with pytest.raises(InvalidContainerError): - extruder_stack.setQualityChangesById("some_quality_changes") #Container registry is empty now. - -## Tests setting variants by specifying an ID of a variant that exists. -def test_setVariantByIdExists(extruder_stack, container_registry): - container_registry.return_value = getInstanceContainer(container_type = "variant") - extruder_stack.setVariantById("InstanceContainer") - assert extruder_stack.variant.getId() == "InstanceContainer" - -## Tests setting variants by specifying an ID of a variant that doesn't exist. -def test_setVariantByIdDoesntExist(extruder_stack): - with pytest.raises(InvalidContainerError): - extruder_stack.setVariantById("some_variant") #Container registry is empty now. diff --git a/tests/Settings/TestGlobalStack.py b/tests/Settings/TestGlobalStack.py index 9b0735c8f2..6bf10dd8c1 100755 --- a/tests/Settings/TestGlobalStack.py +++ b/tests/Settings/TestGlobalStack.py @@ -116,31 +116,6 @@ def test_addExtruder(global_stack): # global_stack.addExtruder(unittest.mock.MagicMock()) assert len(global_stack.extruders) == 2 #Didn't add the faulty extruder. -## Tests getting the approximate material diameter. -@pytest.mark.parametrize("diameter, approximate_diameter", [ - #Some real-life cases that are common in printers. - (2.85, 3), - (1.75, 2), - (3.0, 3), - (2.0, 2), - #Exceptional cases. - (0, 0), - (-10.1, -10), - (-1, -1), - (9000.1, 9000) -]) -def test_approximateMaterialDiameter(diameter, approximate_diameter, global_stack): - global_stack.definition = DefinitionContainer(container_id = "TestDefinition") - material_diameter = UM.Settings.SettingDefinition.SettingDefinition(key = "material_diameter", container = global_stack.definition) - material_diameter.addSupportedProperty("value", UM.Settings.SettingDefinition.DefinitionPropertyType.Any, default = diameter) - global_stack.definition.definitions.append(material_diameter) - assert float(global_stack.approximateMaterialDiameter) == approximate_diameter - -## Tests getting the material diameter when there is no material diameter. -def test_approximateMaterialDiameterNoDiameter(global_stack): - global_stack.definition = DefinitionContainer(container_id = "TestDefinition") - assert global_stack.approximateMaterialDiameter == "-1" - #Tests setting user changes profiles to invalid containers. @pytest.mark.parametrize("container", [ getInstanceContainer(container_type = "wrong container type"), @@ -486,43 +461,6 @@ def test_removeContainer(global_stack): with pytest.raises(InvalidOperationError): global_stack.removeContainer(unittest.mock.MagicMock()) -## Tests setting definitions by specifying an ID of a definition that exists. -def test_setDefinitionByIdExists(global_stack, container_registry): - container_registry.return_value = DefinitionContainer(container_id = "some_definition") - global_stack.setDefinitionById("some_definition") - assert global_stack.definition.getId() == "some_definition" - -## Tests setting definitions by specifying an ID of a definition that doesn't -# exist. -def test_setDefinitionByIdDoesntExist(global_stack): - with pytest.raises(InvalidContainerError): - global_stack.setDefinitionById("some_definition") #Container registry is empty now. - -## Tests setting definition changes by specifying an ID of a container that -# exists. -def test_setDefinitionChangesByIdExists(global_stack, container_registry): - container_registry.return_value = getInstanceContainer(container_type = "definition_changes") - global_stack.setDefinitionChangesById("InstanceContainer") - assert global_stack.definitionChanges.getId() == "InstanceContainer" - -## Tests setting definition changes by specifying an ID of a container that -# doesn't exist. -def test_setDefinitionChangesByIdDoesntExist(global_stack): - with pytest.raises(InvalidContainerError): - global_stack.setDefinitionChangesById("some_definition_changes") #Container registry is empty now. - -## Tests setting materials by specifying an ID of a material that exists. -def test_setMaterialByIdExists(global_stack, container_registry): - container_registry.return_value = getInstanceContainer(container_type = "material") - global_stack.setMaterialById("InstanceContainer") - assert global_stack.material.getId() == "InstanceContainer" - -## Tests setting materials by specifying an ID of a material that doesn't -# exist. -def test_setMaterialByIdDoesntExist(global_stack): - with pytest.raises(InvalidContainerError): - global_stack.setMaterialById("some_material") #Container registry is empty now. - ## Tests whether changing the next stack is properly forbidden. def test_setNextStack(global_stack): with pytest.raises(InvalidOperationError): @@ -567,50 +505,3 @@ def test_setPropertyOtherContainers(target_container, stack_variable, global_sta global_stack.setProperty(key, property, value, target_container = target_container) #The actual test. getattr(global_stack, stack_variable).setProperty.assert_called_once_with(key, property, value) #Make sure that the proper container gets a setProperty call. - -## Tests setting qualities by specifying an ID of a quality that exists. -def test_setQualityByIdExists(global_stack, container_registry): - container_registry.return_value = getInstanceContainer(container_type = "quality") - global_stack.setQualityById("InstanceContainer") - assert global_stack.quality.getId() == "InstanceContainer" - -## Tests setting qualities by specifying an ID of a quality that doesn't exist. -def test_setQualityByIdDoesntExist(global_stack): - with pytest.raises(InvalidContainerError): - global_stack.setQualityById("some_quality") #Container registry is empty now. - -## Tests setting quality changes by specifying an ID of a quality change that -# exists. -def test_setQualityChangesByIdExists(global_stack, container_registry): - container_registry.return_value = getInstanceContainer(container_type = "quality_changes") - global_stack.setQualityChangesById("InstanceContainer") - assert global_stack.qualityChanges.getId() == "InstanceContainer" - -## Tests setting quality changes by specifying an ID of a quality change that -# doesn't exist. -def test_setQualityChangesByIdDoesntExist(global_stack): - with pytest.raises(InvalidContainerError): - global_stack.setQualityChangesById("some_quality_changes") #Container registry is empty now. - -## Tests setting variants by specifying an ID of a variant that exists. -def test_setVariantByIdExists(global_stack, container_registry): - container_registry.return_value = getInstanceContainer(container_type = "variant") - global_stack.setVariantById("InstanceContainer") - assert global_stack.variant.getId() == "InstanceContainer" - -## Tests setting variants by specifying an ID of a variant that doesn't exist. -def test_setVariantByIdDoesntExist(global_stack): - with pytest.raises(InvalidContainerError): - global_stack.setVariantById("some_variant") #Container registry is empty now. - -## Smoke test for findDefaultVariant -def test_smoke_findDefaultVariant(global_stack): - global_stack.findDefaultVariant() - -## Smoke test for findDefaultMaterial -def test_smoke_findDefaultMaterial(global_stack): - global_stack.findDefaultMaterial() - -## Smoke test for findDefaultQuality -def test_smoke_findDefaultQuality(global_stack): - global_stack.findDefaultQuality() diff --git a/tools/check_preset_settings.py b/tools/check_preset_settings.py old mode 100644 new mode 100755