From 106f3e9024d60b230e6d116f540bd65be4948f6b Mon Sep 17 00:00:00 2001 From: Ghostkeeper Date: Mon, 26 Oct 2020 16:24:52 +0100 Subject: [PATCH] Reduce minimum value and default value for minimum line width The previous minimum value was based on anecdotal experience about what the minimum width is that a printer can normally print. That's better as a default value and shouldn't be used as a minimum value. The minimum value should be based on what the technical or physical limitations are. There are no real technical or physical limitations other than that you can't have 0-width lines. So the minimum is just-above-0. Contributes to issue CURA-7682. --- resources/definitions/fdmprinter.def.json | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/resources/definitions/fdmprinter.def.json b/resources/definitions/fdmprinter.def.json index 94052b1732..aea3cea559 100644 --- a/resources/definitions/fdmprinter.def.json +++ b/resources/definitions/fdmprinter.def.json @@ -1364,8 +1364,8 @@ "label": "Minimum Wall Line Width", "description": "Width of the wall that will replace thin features (according to the Minimum Feature Size) of the model. If the Minimum Wall Line Width is thinner than the thickness of the feature, the wall will become as thick as the feature itself.", "unit": "mm", - "value": "wall_line_width_0", - "minimum_value": "0.5 * machine_nozzle_size", + "value": "wall_line_width_0 / 2", + "minimum_value": "0.001", "minimum_value_warning": "min_feature_size", "maximum_value_warning": "wall_line_width_0", "type": "float",