gMax 1.5+ Cura 3.5.1 Config

gMax 1.5+ Cura 3.5.1 Config updates

resources/quality/gmax15plus/gmax15plus_global_dual_normal.inst.cfg

@@ -0,0 +1,72 @@
+[general]
+version = 4
+name = gMax 1.5+ Dual Normal Layers
+definition = gmax15plus_dual
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = normal
+weight = -1
+global_quality = True
+
+[values]
+layer_height = 0.2
+layer_height_0 = 0.28
+
+infill_before_walls = False
+infill_overlap = 20
+infill_pattern = grid
+
+speed_slowdown_layers = 1
+acceleration_enabled = True
+acceleration_print = 400
+acceleration_travel = 700
+
+coasting_enable = False
+coasting_volume = 0.0625
+
+retraction_combing = off
+retraction_amount = 0.75
+retraction_speed = 70
+material_flow = 98
+material_diameter = 1.75
+
+support_use_towers = False
+support_z_distance = 0.2
+support_xy_distance = 1.5
+support_join_distance = 10
+support_interface_enable = True
+support_interface_pattern = lines
+
+adhesion_type = skirt
+skirt_gap = 2
+
+cool_fan_speed = 70
+cool_fan_speed_max = 85
+skin_overlap = 10
+speed_print = 50
+speed_infill = =math.ceil(speed_print * 0.85)
+speed_layer_0 = =math.ceil(speed_print * 0.45)
+speed_topbottom = =math.ceil(speed_print * 0.75)
+speed_wall = =math.ceil(speed_print * 0.5)
+speed_wall_x = =math.ceil(speed_print * 0.7)
+
+top_bottom_pattern = lines
+top_layers = 4
+top_thickness = 1
+bottom_layers = 2
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none
+
+ooze_shield_angle = 20
+ooze_shield_dist = 4
+ooze_shield_enabled = True
+prime_tower_enable = False
+prime_tower_position_x = 350
+prime_tower_position_y = 350
+prime_tower_wall_thickness = 2
+switch_extruder_retraction_amount = 6
+switch_extruder_retraction_speeds = 60
+
+material_standby_temperature = =material_print_temperature - 10