Add Anycubic 4Max profile

resources/definitions/anycubic_4max.def.json

@@ -0,0 +1,65 @@
+{
+    "version": 2,
+    "name": "Anycubic 4max",
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "visible": true,
+        "author": "Jason Scurtu",
+        "manufacturer": "Anycubic",
+        "file_formats": "text/x-gcode",
+        "icon": "icon_ultimaker2",
+        "platform": "anycubic_4max_platform.stl",
+        "has_materials": true,
+        "has_machine_quality": true,
+        "preferred_quality_type": "normal",
+        "machine_extruder_trains":
+        {
+            "0": "anycubic_4max_extruder_0"
+        }
+    },
+
+    "overrides":
+    {
+        "machine_name":
+        {
+            "default_value": "Anycubic 4Max"
+        },
+        "machine_heated_bed":
+        {
+            "default_value": true
+        },
+        "machine_width":
+        {
+            "default_value": 210
+        },
+        "machine_height":
+        {
+            "default_value": 300
+        },
+        "machine_depth":
+        {
+            "default_value": 210
+        },
+        "machine_center_is_zero":
+        {
+            "default_value": false
+        },
+        "gantry_height":
+        {
+            "default_value": 0
+        },
+        "machine_gcode_flavor":
+        {
+            "default_value": "RepRap (Marlin/Sprinter)"
+        },
+        "machine_start_gcode":
+        {
+            "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F{speed_travel} ;move the platform down 15mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\nG5"
+        },
+        "machine_end_gcode":
+        {
+            "default_value": "M104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors\nM107\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle\nto release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F{speed_travel} ;move Z up a bit and retract filament even more\nG28 X0 ;Y0 ;move X/Y to min endstops\nso the head is out of the way\nG1 Y180 F2000\nM84 ;steppers off\nG90\nM300 P300 S4000"
+        }
+    }
+}

resources/extruders/anycubic_4max_extruder_0.def.json

@@ -0,0 +1,16 @@
+{
+    "id": "anycubic_4max_extruder_0",
+    "version": 2,
+    "name": "Extruder 1",
+    "inherits": "fdmextruder",
+    "metadata": {
+        "machine": "anycubic_4max",
+        "position": "0"
+    },
+
+    "overrides": {
+        "extruder_nr": { "default_value": 0 },
+        "machine_nozzle_size": { "default_value": 0.4 },
+        "material_diameter": { "default_value": 1.75 }
+    }
+}

resources/quality/anycubic_4max/anycubic_4max_draft.inst.cfg

@@ -0,0 +1,60 @@
+[general]
+version = 4
+name = Draft
+definition = anycubic_4max
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = draft
+weight = 0
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.3
+layer_height_0 = 0.3
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 60
+speed_support = 60
+speed_topbottom = =math.ceil(speed_print * 30 / 60)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/anycubic_4max/anycubic_4max_high.inst.cfg

@@ -0,0 +1,60 @@
+[general]
+version = 4
+name = High
+definition = anycubic_4max
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = high
+weight = 2
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.1
+layer_height_0 = 0.1
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 50
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2

resources/quality/anycubic_4max/anycubic_4max_normal.inst.cfg

@@ -0,0 +1,60 @@
+[general]
+version = 4
+name = Normal
+definition = anycubic_4max
+
+[metadata]
+setting_version = 5
+type = quality
+quality_type = normal
+weight = 1
+
+[values]
+acceleration_enabled = True
+acceleration_print = 1800
+acceleration_travel = 3000
+adhesion_type = skirt
+brim_width = 4.0
+cool_fan_full_at_height = 0.5
+cool_fan_speed = 100
+cool_fan_speed_0 = 100
+infill_overlap = 15
+infill_pattern = zigzag
+infill_sparse_density = 25
+initial_layer_line_width_factor = 140
+jerk_enabled = True
+jerk_print = 8
+jerk_travel = 10
+layer_height = 0.2
+layer_height_0 = 0.2
+material_bed_temperature = 60
+material_diameter = 1.75
+material_print_temperature = 200
+material_print_temperature_layer_0 = 0
+retract_at_layer_change = False
+retraction_amount = 6
+retraction_hop = 0.075
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = True
+retraction_min_travel = 1.5
+retraction_speed = 40
+skirt_brim_speed = 40
+skirt_gap = 5
+skirt_line_count = 3
+speed_infill = =speed_print
+speed_print = 50
+speed_support = 30
+speed_topbottom = =math.ceil(speed_print * 20 / 50)
+speed_travel = 100
+speed_wall = =speed_print
+speed_wall_x = =speed_print
+support_angle = 60
+support_enable = True
+support_interface_enable = True
+support_pattern = triangles
+support_roof_enable = True
+support_type = everywhere
+support_use_towers = False
+support_xy_distance = 0.7
+top_bottom_thickness = 1.2
+wall_thickness = 1.2