From 0e5dcca81d4fe3bcf7351ff006343d99b9e5adbb Mon Sep 17 00:00:00 2001
From: Ghostkeeper <rubend@tutanota.com>
Date: Tue, 17 May 2016 11:46:25 +0200
Subject: [PATCH] Add definition for BQ Prusa i3 Hephestos

Contributes to issue CURA-1278.
---
 resources/definitions/bq_hephestos.def.json | 88 +++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 resources/definitions/bq_hephestos.def.json

diff --git a/resources/definitions/bq_hephestos.def.json b/resources/definitions/bq_hephestos.def.json
new file mode 100644
index 0000000000..22655a24f0
--- /dev/null
+++ b/resources/definitions/bq_hephestos.def.json
@@ -0,0 +1,88 @@
+{
+    "id": "bq_hephestos",
+    "name": "BQ Prusa i3 Hephestos",
+    "version": 2,
+    "inherits": "fdmprinter",
+    "metadata":
+    {
+        "author": "BQ",
+        "manufacturer": "BQ",
+        "category": "Other",
+        "file_formats": "text/x-gcode"
+    },
+
+    "settings": {
+        "machine_start_gcode": {
+            "value": "; -- START GCODE --\nG21                     ;set units to millimetres\nG90                     ;set to absolute positioning\nM106 S0                 ;set fan speed to zero (turned off)\nG28 X0 Y0               ;move to the X/Y origin (Home)\nG28 Z0                  ;move to the Z origin (Home)\nG1 Z15.0 F1200          ;move Z to position 15.0 mm\nG92 E0                  ;zero the extruded length\nG1 E20 F200             ;extrude 20mm of feed stock\nG92 E0                  ;zero the extruded length again\nG1 F7200                ;set feedrate to 120 mm/sec\n; -- end of START GCODE --"
+        },
+        "machine_end_gcode": {
+            "value": "; -- END GCODE --\nM104 S0                 ;set extruder temperature to zero (turned off)\nG91                     ;set to relative positioning\nG1 E-20 F300            ;retract the filament a bit to release some of the pressure\nG1 Z10                  ;move extruder up 10 mm\nG90                     ;set to absolute positioning\nG1 X0 Y180 F1200        ;expose the platform\nM84                     ;turn off steppers\n; -- end of END GCODE --"
+        },
+        "machine_width": {
+            "value": 215
+        },
+        "machine_depth": {
+            "value": 210
+        },
+        "machine_height": {
+            "value": 180
+        },
+        "machine_heated_bed": {
+            "value": false
+        },
+        "machine_center_is_zero": {
+            "value": false
+        },
+        "machine_gcode_flavor": {
+            "value": "RepRap"
+        },
+        "machine_platform_offset": {
+            "value": [0, -82, 0]
+        },
+        "layer_height": {
+            "value": 0.2
+        },
+        "layer_height_0": {
+            "value": 0.2
+        },
+        "wall_thickness": {
+            "value": 1.0
+        },
+        "top_bottom_thickness": {
+            "value": 1.0
+        },
+        "bottom_thickness": {
+            "value": 1.0
+        },
+        "material_print_temperature": {
+            "value": 220
+        },
+        "material_bed_temperature": {
+            "value": 0
+        },
+        "material_diameter": {
+            "value": 1.75
+        },
+        "speed_print": {
+            "value": 40.0
+        },
+        "speed_infill": {
+            "value": 40.0
+        },
+        "speed_wall": {
+            "value": 35.0
+        },
+        "speed_topbottom": {
+            "value": 35.0
+        },
+        "speed_travel": {
+            "value": 120.0
+        },
+        "speed_layer_0": {
+            "value": 20.0
+        },
+        "support_enable": {
+            "value": true
+        }
+    }
+}
\ No newline at end of file