mirror of
https://github.com/Ultimaker/Cura.git
synced 2025-08-10 07:15:03 -06:00
Move ironing into shell category
It is no longer considered experimental.
This commit is contained in:
Ghostkeeper
ChrisTerBeke
parent
df1a11ca07
commit
085e933e34
1 changed files with 118 additions and 118 deletions
|
|
@ -1340,6 +1340,124 @@
|
|||
"type": "int",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_enabled":
|
||||
{
|
||||
"label": "Enable Ironing",
|
||||
"description": "Go over the top surface one additional time, but without extruding material. This is meant to melt the plastic on top further, creating a smoother surface.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_only_highest_layer":
|
||||
{
|
||||
"label": "Iron Only Highest Layer",
|
||||
"description": "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_pattern":
|
||||
{
|
||||
"label": "Ironing Pattern",
|
||||
"description": "The pattern to use for ironing top surfaces.",
|
||||
"type": "enum",
|
||||
"options":
|
||||
{
|
||||
"concentric": "Concentric",
|
||||
"zigzag": "Zig Zag"
|
||||
},
|
||||
"default_value": "zigzag",
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_line_spacing":
|
||||
{
|
||||
"label": "Ironing Line Spacing",
|
||||
"description": "The distance between the lines of ironing.",
|
||||
"type": "float",
|
||||
"unit": "mm",
|
||||
"default_value": 0.1,
|
||||
"minimum_value": "0.001",
|
||||
"maximum_value_warning": "machine_nozzle_tip_outer_diameter",
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_flow":
|
||||
{
|
||||
"label": "Ironing Flow",
|
||||
"description": "The amount of material, relative to a normal skin line, to extrude during ironing. Keeping the nozzle filled helps filling some of the crevices of the top surface, but too much results in overextrusion and blips on the side of the surface.",
|
||||
"type": "float",
|
||||
"unit": "%",
|
||||
"default_value": 10.0,
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_inset":
|
||||
{
|
||||
"label": "Ironing Inset",
|
||||
"description": "A distance to keep from the edges of the model. Ironing all the way to the edge of the mesh may result in a jagged edge on your print.",
|
||||
"type": "float",
|
||||
"unit": "mm",
|
||||
"default_value": 0.35,
|
||||
"value": "wall_line_width_0 / 2",
|
||||
"minimum_value_warning": "0",
|
||||
"maximum_value_warning": "wall_line_width_0",
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"speed_ironing":
|
||||
{
|
||||
"label": "Ironing Speed",
|
||||
"description": "The speed at which to pass over the top surface.",
|
||||
"type": "float",
|
||||
"unit": "mm/s",
|
||||
"default_value": 20.0,
|
||||
"value": "speed_topbottom * 20 / 30",
|
||||
"minimum_value": "0.001",
|
||||
"maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2)",
|
||||
"maximum_value_warning": "100",
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"acceleration_ironing":
|
||||
{
|
||||
"label": "Ironing Acceleration",
|
||||
"description": "The acceleration with which ironing is performed.",
|
||||
"unit": "mm/s²",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "100",
|
||||
"maximum_value_warning": "10000",
|
||||
"default_value": 3000,
|
||||
"value": "acceleration_topbottom",
|
||||
"enabled": "resolveOrValue('acceleration_enabled') and ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"jerk_ironing":
|
||||
{
|
||||
"label": "Ironing Jerk",
|
||||
"description": "The maximum instantaneous velocity change while performing ironing.",
|
||||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_topbottom",
|
||||
"enabled": "resolveOrValue('jerk_enabled') and ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
}
|
||||
},
|
||||
|
|
@ -5813,124 +5931,6 @@
|
|||
"settable_per_mesh": false,
|
||||
"settable_per_extruder": false,
|
||||
"settable_per_meshgroup": false
|
||||
},
|
||||
"ironing_enabled":
|
||||
{
|
||||
"label": "Enable Ironing",
|
||||
"description": "Go over the top surface one additional time, but without extruding material. This is meant to melt the plastic on top further, creating a smoother surface.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_only_highest_layer":
|
||||
{
|
||||
"label": "Iron Only Highest Layer",
|
||||
"description": "Only perform ironing on the very last layer of the mesh. This saves time if the lower layers don't need a smooth surface finish.",
|
||||
"type": "bool",
|
||||
"default_value": false,
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_pattern":
|
||||
{
|
||||
"label": "Ironing Pattern",
|
||||
"description": "The pattern to use for ironing top surfaces.",
|
||||
"type": "enum",
|
||||
"options":
|
||||
{
|
||||
"concentric": "Concentric",
|
||||
"zigzag": "Zig Zag"
|
||||
},
|
||||
"default_value": "zigzag",
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_line_spacing":
|
||||
{
|
||||
"label": "Ironing Line Spacing",
|
||||
"description": "The distance between the lines of ironing.",
|
||||
"type": "float",
|
||||
"unit": "mm",
|
||||
"default_value": 0.1,
|
||||
"minimum_value": "0.001",
|
||||
"maximum_value_warning": "machine_nozzle_tip_outer_diameter",
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_flow":
|
||||
{
|
||||
"label": "Ironing Flow",
|
||||
"description": "The amount of material, relative to a normal skin line, to extrude during ironing. Keeping the nozzle filled helps filling some of the crevices of the top surface, but too much results in overextrusion and blips on the side of the surface.",
|
||||
"type": "float",
|
||||
"unit": "%",
|
||||
"default_value": 10.0,
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "50",
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"ironing_inset":
|
||||
{
|
||||
"label": "Ironing Inset",
|
||||
"description": "A distance to keep from the edges of the model. Ironing all the way to the edge of the mesh may result in a jagged edge on your print.",
|
||||
"type": "float",
|
||||
"unit": "mm",
|
||||
"default_value": 0.35,
|
||||
"value": "wall_line_width_0 / 2",
|
||||
"minimum_value_warning": "0",
|
||||
"maximum_value_warning": "wall_line_width_0",
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"speed_ironing":
|
||||
{
|
||||
"label": "Ironing Speed",
|
||||
"description": "The speed at which to pass over the top surface.",
|
||||
"type": "float",
|
||||
"unit": "mm/s",
|
||||
"default_value": 20.0,
|
||||
"value": "speed_topbottom * 20 / 30",
|
||||
"minimum_value": "0.001",
|
||||
"maximum_value": "math.sqrt(machine_max_feedrate_x ** 2 + machine_max_feedrate_y ** 2)",
|
||||
"maximum_value_warning": "100",
|
||||
"enabled": "ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"acceleration_ironing":
|
||||
{
|
||||
"label": "Ironing Acceleration",
|
||||
"description": "The acceleration with which ironing is performed.",
|
||||
"unit": "mm/s²",
|
||||
"type": "float",
|
||||
"minimum_value": "0.1",
|
||||
"minimum_value_warning": "100",
|
||||
"maximum_value_warning": "10000",
|
||||
"default_value": 3000,
|
||||
"value": "acceleration_topbottom",
|
||||
"enabled": "resolveOrValue('acceleration_enabled') and ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
},
|
||||
"jerk_ironing":
|
||||
{
|
||||
"label": "Ironing Jerk",
|
||||
"description": "The maximum instantaneous velocity change while performing ironing.",
|
||||
"unit": "mm/s",
|
||||
"type": "float",
|
||||
"minimum_value": "0",
|
||||
"maximum_value_warning": "50",
|
||||
"default_value": 20,
|
||||
"value": "jerk_topbottom",
|
||||
"enabled": "resolveOrValue('jerk_enabled') and ironing_enabled",
|
||||
"limit_to_extruder": "top_bottom_extruder_nr",
|
||||
"settable_per_mesh": true
|
||||
}
|
||||
}
|
||||
},
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue