Update quality profiles from material research

This locks initial layer speed at 20, without scaling from the normal print speed. It also adjusts some jerk and speed of support infill.

resources/quality/ultimaker3/um3_aa0.4_ABS_Draft_Print.inst.cfg

@@ -18,7 +18,7 @@ material_final_print_temperature = =material_print_temperature - 10
 prime_tower_size = 16
 skin_overlap = 20
 speed_print = 60
-speed_layer_0 = =round(speed_print * 30 / 60)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)

resources/quality/ultimaker3/um3_aa0.4_ABS_Fast_Print.inst.cfg

@@ -19,7 +19,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 16
 speed_print = 60
-speed_layer_0 = =round(speed_print * 30 / 60)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

resources/quality/ultimaker3/um3_aa0.4_ABS_High_Quality.inst.cfg

@@ -19,7 +19,7 @@ material_initial_print_temperature = =material_print_temperature - 5
 material_final_print_temperature = =material_print_temperature - 10
 prime_tower_size = 16
 speed_print = 50
-speed_layer_0 = =round(speed_print * 30 / 50)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
 

resources/quality/ultimaker3/um3_aa0.4_ABS_Normal_Quality.inst.cfg

@@ -17,7 +17,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 16
 speed_print = 55
-speed_layer_0 = =round(speed_print * 30 / 55)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
 

resources/quality/ultimaker3/um3_aa0.4_CPE_Draft_Print.inst.cfg

@@ -17,7 +17,7 @@ material_standby_temperature = 100
 prime_tower_size = 17
 skin_overlap = 20
 speed_print = 60
-speed_layer_0 = =round(speed_print * 30 / 60)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 35 / 60)
 speed_wall = =math.ceil(speed_print * 45 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 45)

resources/quality/ultimaker3/um3_aa0.4_CPE_Fast_Print.inst.cfg

@@ -17,7 +17,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 17
 speed_print = 60
-speed_layer_0 = =round(speed_print * 30 / 60)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 40 / 60)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

resources/quality/ultimaker3/um3_aa0.4_CPE_High_Quality.inst.cfg

@@ -19,7 +19,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 17
 speed_print = 50
-speed_layer_0 = =round(speed_print * 30 / 50)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 50)
 speed_wall = =math.ceil(speed_print * 30 / 50)
 

resources/quality/ultimaker3/um3_aa0.4_CPE_Normal_Quality.inst.cfg

@@ -17,7 +17,7 @@ material_final_print_temperature = =material_print_temperature - 10
 material_standby_temperature = 100
 prime_tower_size = 17
 speed_print = 55
-speed_layer_0 = =round(speed_print * 30 / 55)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 55)
 speed_wall = =math.ceil(speed_print * 30 / 55)
 

resources/quality/ultimaker3/um3_aa0.4_PLA_Draft_Print.inst.cfg

@@ -18,6 +18,7 @@ material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 20
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 35 / 70)
 speed_wall = =math.ceil(speed_print * 50 / 70)
 speed_wall_0 = =math.ceil(speed_wall * 35 / 50)

resources/quality/ultimaker3/um3_aa0.4_PLA_Fast_Print.inst.cfg

@@ -17,7 +17,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
 speed_print = 80
-speed_layer_0 = =round(speed_print * 30 / 80)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 80)
 speed_wall = =math.ceil(speed_print * 40 / 80)
 speed_wall_0 = =math.ceil(speed_wall * 30 / 40)

resources/quality/ultimaker3/um3_aa0.4_PLA_High_Quality.inst.cfg

@@ -20,7 +20,7 @@ material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
 speed_print = 60
-speed_layer_0 = =round(speed_print * 30 / 60)
+speed_layer_0 = 20
 speed_topbottom = =math.ceil(speed_print * 30 / 60)
 speed_wall = =math.ceil(speed_print * 30 / 60)
 top_bottom_thickness = 1

resources/quality/ultimaker3/um3_aa0.4_PLA_Normal_Quality.inst.cfg

@@ -18,6 +18,7 @@ machine_nozzle_heat_up_speed = 1.6
 material_standby_temperature = 100
 prime_tower_enable = False
 skin_overlap = 10
+speed_layer_0 = 20
 top_bottom_thickness = 1
 wall_thickness = 1
 

resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg

@@ -12,13 +12,15 @@ material = generic_pva_ultimaker3_BB_0.4
 [values]
 acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_support
 jerk_support = =math.ceil(jerk_print * 5 / 25)
 jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_support
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 skin_overlap = 20
 support_interface_height = 0.8
 prime_tower_enable = False
+speed_support_interface = =math.ceil(speed_support * 20 / 25)
+jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
+acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 )
+support_xy_distance = =round(line_width * 1.5, 2)
 

resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg

@@ -12,13 +12,14 @@ material = generic_pva_ultimaker3_BB_0.4
 [values]
 acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_support
 jerk_support = =math.ceil(jerk_print * 5 / 25)
 jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_support
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 skin_overlap = 15
 support_interface_height = 0.8
 prime_tower_enable = False
-
+speed_support_interface = =math.ceil(speed_support * 20 / 25)
+jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
+acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 )
+support_xy_distance = =round(line_width * 1.5, 2)

resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg

@@ -12,12 +12,14 @@ material = generic_pva_ultimaker3_BB_0.4
 [values]
 acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_support
 jerk_support = =math.ceil(jerk_print * 5 / 25)
 jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_support
 support_infill_rate = 25
 support_interface_height = 0.8
 material_standby_temperature = 100
 prime_tower_enable = False
+speed_support_interface = =math.ceil(speed_support * 20 / 25)
+jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
+acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 )
+support_xy_distance = =round(line_width * 1.5, 2)
 

resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg

@@ -12,12 +12,13 @@ material = generic_pva_ultimaker3_BB_0.4
 [values]
 acceleration_support = =math.ceil(acceleration_print * 500 / 4000)
 acceleration_support_infill = =acceleration_support
-acceleration_support_interface = =acceleration_support
 jerk_support = =math.ceil(jerk_print * 5 / 25)
 jerk_support_infill = =jerk_support
-jerk_support_interface = =jerk_support
 support_infill_rate = 25
 support_interface_height = 0.8
 material_standby_temperature = 100
 prime_tower_enable = False
-
+speed_support_interface = =math.ceil(speed_support * 20 / 25)
+jerk_support_interface = =math.ceil(jerk_support * 1 / 5)
+acceleration_support_interface = =math.ceil(acceleration_support * 100 / 500 )
+support_xy_distance = =round(line_width * 1.5, 2)