Add SV06 Plus profile based on Sovol profile, Update SV06 profile with updates

resources/definitions/sovol_base.def.json

@@ -70,7 +70,7 @@
     "overrides":
     {
         "acceleration_enabled": { "value": true },
-        "acceleration_print": { "value": 500 },
+        "acceleration_print": { "value": "machine_acceleration" },
         "acceleration_roofing": { "enabled": "acceleration_enabled and roofing_layer_count > 0 and top_layers > 0" },
         "acceleration_travel": { "value": 500 },
         "acceleration_travel_layer_0": { "value": "acceleration_travel" },
@@ -83,6 +83,7 @@
         "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 89 else 'cubic'" },
         "infill_sparse_density": { "value": 10.0 },
         "infill_wipe_dist": { "value": 0.0 },
+        "initial_layer_line_width_factor": { "value": 150 },
         "jerk_enabled": { "value": true },
         "jerk_print": { "value": 8 },
         "jerk_travel": { "value": "jerk_print * 2" },
@@ -96,11 +97,13 @@
         "machine_max_feedrate_x": { "value": 500 },
         "machine_max_feedrate_y": { "value": 500 },
         "machine_max_feedrate_z": { "value": 10 },
+        "machine_max_jerk_e": { "value": 5 },
         "machine_max_jerk_xy": { "value": 8 },
+        "machine_max_jerk_z": { "value": 0.4 },
         "material_diameter": { "default_value": 1.75 },
         "material_final_print_temperature": { "value": "material_print_temperature" },
         "material_initial_print_temperature": { "value": "material_print_temperature" },
-        "optimize_wall_printing_order": { "value": "True" },
+        "optimize_wall_printing_order": { "value": true },
         "retraction_amount": { "default_value": 0.5 },
         "retraction_speed": { "default_value": 40 },
         "skin_monotonic": { "value": true },
@@ -111,6 +114,7 @@
         "speed_wall": { "value": "math.ceil(speed_print * (50 / 100))" },
         "wall_0_wipe_dist": { "value": 0.0 },
         "wall_thickness": { "value": "line_width * 2" },
+        "zig_zaggify_infill": { "value": true },
         "z_seam_corner": { "value": "'z_seam_corner_inner'" },
         "z_seam_type": { "value": "'sharpest_corner'" }
     }

resources/definitions/sovol_base_planetary.def.json

@@ -8,5 +8,13 @@
         "quality_definition": "sovol_base_planetary"
     },
     "overrides":
-    {}
+    {
+        "jerk_print": { "value": 5 },
+        "machine_acceleration": { "value": 1000 },
+        "machine_max_feedrate_e": { "value": 40 },
+        "machine_max_jerk_xy": { "value": 5 },
+        "material_print_temperature": { "value": 195 },
+        "retraction_speed": { "default_value": 30},
+        "z_seam_corner": { "value": "'z_seam_corner_weighted'" }
+    }
 }

resources/definitions/sovol_sv06.def.json

@@ -10,6 +10,8 @@
     "overrides":
     {
         "gantry_height": { "value": 25 },
+        "infill_pattern": { "value": "'lines'" },
+        "infill_sparse_density": { "value": 15 },
         "machine_depth": { "default_value": 220 },
         "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y240 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positioning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
         "machine_head_with_fans_polygon":
@@ -24,6 +26,18 @@
         "machine_height": { "default_value": 250 },
         "machine_name": { "default_value": "SV06" },
         "machine_start_gcode": { "default_value": "M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration\nM203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate\nM204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration\nM205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\n\nG28 ;Home\nM420 S1 ;use bed mesh, must have used G29 previously\n\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
-        "machine_width": { "default_value": 220 }
+        "machine_width": { "default_value": 220 },
+        "retraction_hop": { "value": "2 * layer_height" },
+        "retraction_hop_enabled": { "value": true },
+        "skirt_brim_speed": { "value": "speed_layer_0" },
+        "speed_infill": { "value": "speed_print" },
+        "speed_print": { "value": 60.0 },
+        "speed_travel": { "value": 200 },
+        "speed_wall": { "value": "speed_print / 2" },
+        "speed_wall_0": { "value": "speed_wall / 1.2" },
+        "speed_wall_x": { "value": "speed_wall" },
+        "wall_thickness": { "value": 1.2 },
+        "z_seam_corner": { "value": "'z_seam_corner_weighted'" },
+        "z_seam_type": { "value": "'back'" }
     }
 }

resources/definitions/sovol_sv06_plus.def.json

@@ -0,0 +1,71 @@
+{
+    "version": 2,
+    "name": "Sovol-SV06 Plus",
+    "inherits": "sovol_base_planetary",
+    "metadata":
+    {
+        "visible": true,
+        "author": "ashokvarma.com",
+        "quality_definition": "sovol_base_planetary"
+    },
+    "overrides":
+    {
+        "acceleration_wall":{ "value" : "acceleration_print / 4"},
+        "bottom_layers": { "value": 4 },
+        "coasting_enable": { "value": true },
+        "fill_outline_gaps": { "value": true },
+        "gantry_height": { "value": 35 },
+        "infill_overlap": { "value": 10.0 },
+        "infill_pattern": { "value": "'gyroid'" },
+        "infill_wipe_dist": { "value": 0.1 },
+        "jerk_travel": { "value": "jerk_print" },
+        "machine_depth": { "default_value": 300 },
+        "machine_end_gcode": { "default_value": "G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X0 Y220 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y{machine_depth} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n" },
+        "machine_head_with_fans_polygon":
+        {
+            "default_value": [
+                [-44, 16],
+                [-44, -60],
+                [44, -60],
+                [44, 16]
+            ]
+        },
+        "machine_height": { "default_value": 340 },
+        "machine_max_feedrate_z": { "value": 20 },
+        "machine_name": { "default_value": "SV06 Plus" },
+        "machine_start_gcode": { "default_value": "G28 ;Home\n\nM420 S1;\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\n" },
+        "machine_width": { "default_value": 300 },
+        "raft_margin": { "value": 5 },
+        "retract_at_layer_change": {"value": false},
+        "retraction_extra_prime_amount": { "value": 0 },
+        "retraction_hop": { "value": 0 },
+        "roofing_layer_count": { "value": 1 },
+        "skin_preshrink": { "value": 0.8 },
+        "skirt_gap": {
+            "value": 0 ,
+            "minimum_value_warning": "0"
+        },
+        "skirt_line_count": { "value": 2 },
+        "speed_layer_0": {"value": "speed_print * 2 / 5"},
+        "speed_print": { "value": 150.0 } ,
+        "speed_topbottom": {"value": "speed_print * 2 / 5"},
+        "speed_travel": { "value": "speed_print * 4 / 3" } ,
+        "speed_wall": { "value": "speed_print * 2 / 5" },
+        "speed_wall_0": { "value": "speed_wall - 10" },
+        "speed_wall_x": { "value": "speed_wall" },
+        "speed_z_hop": {"value": "machine_max_feedrate_z"},
+        "support_angle": {"value": 70},
+        "support_brim_enable": {"value": true},
+        "support_conical_angle": {"value": 70},
+        "support_conical_enabled":{"value": true},
+        "support_conical_min_width": {"value": 20},
+        "support_infill_rate": {"value": 10},
+        "support_interface_enable": {"value": true},
+        "support_skip_some_zags": {"value": true},
+        "support_skip_zag_per_mm": {"value": 40},
+        "support_z_distance": {"value": 0.25},
+        "top_bottom_pattern": { "value": "'zigzag'" },
+        "wall_0_wipe_dist": { "value": 0.4 },
+        "z_seam_relative": {"value": true}
+    }
+}

resources/variants/sovol/sovol_sv06_plus_0.2.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+definition = sovol_sv06_plus
+name = 0.2mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.2
+

resources/variants/sovol/sovol_sv06_plus_0.3.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+definition = sovol_sv06_plus
+name = 0.3mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.3
+

resources/variants/sovol/sovol_sv06_plus_0.4.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+definition = sovol_sv06_plus
+name = 0.4mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.4
+

resources/variants/sovol/sovol_sv06_plus_0.5.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+definition = sovol_sv06_plus
+name = 0.5mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.5
+

resources/variants/sovol/sovol_sv06_plus_0.6.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+definition = sovol_sv06_plus
+name = 0.6mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.6
+

resources/variants/sovol/sovol_sv06_plus_0.8.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+definition = sovol_sv06_plus
+name = 0.8mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 0.8
+

resources/variants/sovol/sovol_sv06_plus_1.0.inst.cfg

@@ -0,0 +1,13 @@
+[general]
+definition = sovol_sv06_plus
+name = 1.0mm Nozzle
+version = 4
+
+[metadata]
+hardware_type = nozzle
+setting_version = 22
+type = variant
+
+[values]
+machine_nozzle_size = 1.0
+