Merge branch 'updateTiZYX' of https://github.com/TiZYX/Cura into TiZYX-updateTiZYX

Conflicts:
	resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_1.0_abs_coarse.inst.cfg -> Deleted in branch, but modified for setting version
	resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_1.0_abs_draft.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_1.0_abs_extra_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_0.6_petg_draft.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_1.0_petg_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_1.0_petg_draft.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_1.0_petg_extra_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_0.8_pla_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_1.0_pla_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_1.0_pla_extra_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/variants/tizyx_evy_dual_direct_drive.inst.cfg -> Modified in branch for new settings, in master for settings version

resources/definitions/tizyx_evy.def.json

@@ -69,6 +69,13 @@
         "machine_end_gcode":
         {
             "default_value": "M104 S0\nM140 S0\nG91\nG1 E-5 F300\nG1 Z+3 F3000\nG1 Y245 F3000\nM84"
-        }
+        },
+
+        "acceleration_enabled": {"value": "False"},
+        "acceleration_print": {"value": "1500"},
+        "z_seam_type": {"default_value": "back"},
+        "z_seam_x": {"value": "127.5"},
+        "z_seam_y": {"value": "250"},
+        "retraction_combing": {"default_value": "off"}
     }
 }

resources/definitions/tizyx_evy_dual.def.json

@@ -52,6 +52,13 @@
         "machine_end_gcode":
         {
             "default_value": "M104 S0\nM140 S0\nG91\nG1 E-5 F300\nG1 Z+3 F3000\nG1 Y245 F3000\nM84"
-        }
+        },
+
+        "acceleration_enabled": {"value": "False"},
+        "acceleration_print": {"value": "1500"},
+        "z_seam_type": {"default_value": "back"},
+        "z_seam_x": {"value": "127.5"},
+        "z_seam_y": {"value": "250"},
+        "retraction_combing": {"default_value": "off"}
     }
 }

resources/definitions/tizyx_k25.def.json

@@ -47,6 +47,14 @@
         "machine_end_gcode":
         {
             "default_value": "M104 S0\nM140 S0\nG91\nG1 E-5 F300\nG1 Z+3 F3000\nG1 Y245 F3000\nM84"
-        }
+        },
+
+
+        "acceleration_enabled": {"value": "False"},
+        "acceleration_print": {"value": "1500"},
+        "z_seam_type": {"default_value": "back"},
+        "z_seam_x": {"value": "127.5"},
+        "z_seam_y": {"value": "250"},
+        "retraction_combing": {"default_value": "off"}
     }
 }

resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_0.6_abs_coarse.inst.cfg

@@ -7,7 +7,7 @@ definition = tizyx_evy
 setting_version = 8
 type = quality
 quality_type = coarse
-weight = -3
+weight = -2
 material = generic_abs
 variant = 0.6mm
 

resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_0.8_abs_extra_coarse.inst.cfg

@@ -7,7 +7,7 @@ definition = tizyx_evy
 setting_version = 8
 type = quality
 quality_type = coarse
-weight = -3
+weight = -2
 material = generic_abs
 variant = 0.8mm
 

resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_1.0_abs_coarse.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = tizyx_evy
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = coarse
-weight = -3
-material = generic_abs
-variant = 1.0mm
-
-[values]
-

resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_1.0_abs_draft.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = tizyx_evy
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = draft
-weight = -2
-material = generic_abs
-variant = 1.0mm
-
-[values]
-

resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_1.0_abs_extra_coarse.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Extra Coarse
-definition = tizyx_evy
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = extra coarse
-weight = -4
-material = generic_abs
-variant = 1.0mm
-
-[values]
-

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.2_flex_high.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_flex
+variant = 0.2mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.3_flex_high.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_flex
+variant = 0.3mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.4_flex_high.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_flex
+variant = 0.4mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.4_flex_normal.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = Normal
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+material = tizyx_flex
+variant = 0.4mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.5_flex_draft.inst.cfg

@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Draft
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -2
+material = tizyx_flex
+variant = 0.5mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20
+

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.5_flex_high.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_flex
+variant = 0.5mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.5_flex_normal.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = Normal
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+material = tizyx_flex
+variant = 0.5mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.6_flex_coarse.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = Draft
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = coarse
+weight = -2
+material = tizyx_flex
+variant = 0.6mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.6_flex_high.inst.cfg

@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_flex
+variant = 0.6mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20
+

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.6_flex_normal.inst.cfg

@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Normal
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+material = tizyx_flex
+variant = 0.6mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20
+

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.8_flex_extra_coarse.inst.cfg

@@ -0,0 +1,21 @@
+[general]
+version = 4
+name = Draft
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = extra coarse
+weight = -2
+material = tizyx_flex
+variant = 0.8mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20
+

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.8_flex_high.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_flex
+variant = 0.8mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20

resources/quality/tizyx/tizyx_evy/flex/tizyx_evy_0.8_flex_normal.inst.cfg

@@ -0,0 +1,20 @@
+[general]
+version = 4
+name = Normal
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+material = tizyx_flex
+variant = 0.8mm
+
+[values]
+speed_infill = 25
+speed_layer_0 = 15
+speed_print = 30
+speed_topbottom = 25
+speed_wall_0 = 20
+speed_wall_x = 20

resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_0.6_petg_coarse.inst.cfg

@@ -7,7 +7,7 @@ definition = tizyx_evy
 setting_version = 8
 type = quality
 quality_type = coarse
-weight = -3
+weight = -2
 material = generic_petg
 variant = 0.6mm
 

resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_0.6_petg_draft.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = tizyx_evy
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = draft
-weight = -2
-material = generic_petg
-variant = 0.6mm
-
-[values]
-

resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_0.8_petg_extra_coarse.inst.cfg

@@ -6,7 +6,7 @@ definition = tizyx_evy
 [metadata]
 setting_version = 8
 type = quality
-quality_type = draft
+quality_type = extra coarse
 weight = -2
 material = generic_petg
 variant = 0.8mm

resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_1.0_petg_coarse.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = tizyx_evy
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = coarse
-weight = -3
-material = generic_petg
-variant = 1.0mm
-
-[values]
-

resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_1.0_petg_draft.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = tizyx_evy
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = draft
-weight = -2
-material = generic_petg
-variant = 1.0mm
-
-[values]
-

resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_1.0_petg_extra_coarse.inst.cfg

@@ -1,15 +0,0 @@
-[general]
-version = 4
-name = Extra Coarse
-definition = tizyx_evy
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = extra coarse
-weight = -4
-material = generic_petg
-variant = 1.0mm
-
-[values]
-

resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_0.6_pla_coarse.inst.cfg

@@ -6,7 +6,7 @@ definition = tizyx_evy
 [metadata]
 setting_version = 8
 type = quality
-quality_type = draft
+quality_type = coarse
 weight = -2
 material = generic_pla
 variant = 0.6mm

resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_0.8_pla_coarse.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = tizyx_evy
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = coarse
-weight = -3
-material = generic_pla
-variant = 0.8mm
-
-[values]

resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_0.8_pla_extra_coarse.inst.cfg

@@ -6,9 +6,10 @@ definition = tizyx_evy
 [metadata]
 setting_version = 8
 type = quality
-quality_type = draft
+quality_type = extra coarse
 weight = -2
 material = generic_pla
 variant = 0.8mm
 
 [values]
+

resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_1.0_pla_coarse.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Coarse
-definition = tizyx_evy
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = coarse
-weight = -3
-material = generic_pla
-variant = 1.0mm
-
-[values]

resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_1.0_pla_extra_coarse.inst.cfg

@@ -1,14 +0,0 @@
-[general]
-version = 4
-name = Extra Coarse
-definition = tizyx_evy
-
-[metadata]
-setting_version = 8
-type = quality
-quality_type = extra coarse
-weight = -4
-material = generic_pla
-variant = 1.0mm
-
-[values]

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.2_pla_bois_high.inst.cfg

@@ -8,8 +8,7 @@ setting_version = 8
 type = quality
 quality_type = high
 weight = 1
-material = generic_petg
+material = tizyx_pla_bois
-variant = 1.0mm
+variant = 0.2mm
 
 [values]
-

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.3_pla_bois_high.inst.cfg

@@ -8,7 +8,7 @@ setting_version = 8
 type = quality
 quality_type = high
 weight = 1
-material = generic_pla
+material = tizyx_pla_bois
-variant = 1.0mm
+variant = 0.3mm
 
 [values]

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.4_pla_bois_high.inst.cfg

@@ -8,8 +8,7 @@ setting_version = 8
 type = quality
 quality_type = high
 weight = 1
-material = generic_abs
+material = tizyx_pla_bois
-variant = 1.0mm
+variant = 0.4mm
 
 [values]
-

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.4_pla_bois_normal.inst.cfg

@@ -8,8 +8,7 @@ setting_version = 8
 type = quality
 quality_type = normal
 weight = 0
-material = generic_abs
+material = tizyx_pla_bois
-variant = 1.0mm
+variant = 0.4mm
 
 [values]
-

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.5_pla_bois_draft.inst.cfg

@@ -8,7 +8,8 @@ setting_version = 8
 type = quality
 quality_type = draft
 weight = -2
-material = generic_pla
+material = tizyx_pla_bois
-variant = 1.0mm
+variant = 0.5mm
 
 [values]
+

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.5_pla_bois_high.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_pla_bois
+variant = 0.5mm
+
+[values]

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.5_pla_bois_normal.inst.cfg

@@ -8,8 +8,7 @@ setting_version = 8
 type = quality
 quality_type = normal
 weight = 0
-material = generic_petg
+material = tizyx_pla_bois
-variant = 1.0mm
+variant = 0.5mm
 
 [values]
-

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.6_pla_bois_coarse.inst.cfg

@@ -1,15 +1,14 @@
 [general]
 version = 4
-name = Coarse
+name = Draft
 definition = tizyx_evy
 
 [metadata]
 setting_version = 8
 type = quality
-quality_type = draft
+quality_type = coarse
 weight = -2
-material = generic_abs
+material = tizyx_pla_bois
 variant = 0.6mm
 
 [values]
-

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.6_pla_bois_high.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_pla_bois
+variant = 0.6mm
+
+[values]

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.6_pla_bois_normal.inst.cfg

@@ -8,7 +8,7 @@ setting_version = 8
 type = quality
 quality_type = normal
 weight = 0
-material = generic_pla
+material = tizyx_pla_bois
-variant = 1.0mm
+variant = 0.6mm
 
 [values]

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.8_pla_bois_extra_coarse.inst.cfg

@@ -1,14 +1,14 @@
 [general]
 version = 4
-name = Coarse
+name = Draft
 definition = tizyx_evy
 
 [metadata]
 setting_version = 8
 type = quality
-quality_type = draft
+quality_type = extra coarse
 weight = -2
-material = generic_abs
+material = tizyx_pla_bois
 variant = 0.8mm
 
 [values]

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.8_pla_bois_high.inst.cfg

@@ -0,0 +1,14 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_pla_bois
+variant = 0.8mm
+
+[values]

resources/quality/tizyx/tizyx_evy/pla_bois/tizyx_evy_0.8_pla_bois_normal.inst.cfg

@@ -1,15 +1,14 @@
 [general]
 version = 4
-name = Coarse
+name = Normal
 definition = tizyx_evy
 
 [metadata]
 setting_version = 8
 type = quality
-quality_type = coarse
+quality_type = normal
-weight = -3
+weight = 0
-material = generic_petg
+material = tizyx_pla_bois
 variant = 0.8mm
 
 [values]
-

resources/quality/tizyx/tizyx_evy/tizyx_evy_global_Coarse_Quality.inst.cfg

@@ -1,15 +1,45 @@
 [general]
 version = 4
-name = Coarse
+name = Draft
 definition = tizyx_evy
 
 [metadata]
 setting_version = 8
 type = quality
 quality_type = coarse
-weight = -3
+weight = -2
 global_quality = True
 
 [values]
-layer_height = 0.4
+layer_height = 0.3
 layer_height_0 = =layer_height
+initial_layer_line_width_factor = 90
+infill_overlap = 15
+material_flow_layer_0 = 93
+material_flow = 99
+retractation_amount = 5
+retractation_speed = 60
+speed_wall_0 = 45
+speed_wall_x = 50
+speed_topbottom  = 45
+support_enable= True
+support_angle = 70
+adhesion_type = skirt
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 2
+speed_print = 60
+cool_fan_speed_0 = 10
+cool_min_layer_time = 12
+layer_start_x = 250
+layer_start_y = 250
+coasting_enable = False
+wall_line_count = 2
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True

resources/quality/tizyx/tizyx_evy/tizyx_evy_global_Draft_Quality.inst.cfg

@@ -13,3 +13,33 @@ global_quality = True
 [values]
 layer_height = 0.25
 layer_height_0 = =layer_height
+initial_layer_line_width_factor = 90
+infill_overlap = 15
+material_flow_layer_0 = 93
+material_flow = 99
+retractation_amount = 5
+retractation_speed = 60
+speed_wall_0 = 45
+speed_wall_x = 50
+speed_topbottom  = 45
+support_enable= True
+support_angle = 70
+adhesion_type = skirt
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 2
+speed_print = 60
+cool_fan_speed_0 = 10
+cool_min_layer_time = 12
+layer_start_x = 250
+layer_start_y = 250
+coasting_enable = False
+wall_line_count = 2
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True

resources/quality/tizyx/tizyx_evy/tizyx_evy_global_Extra_Coarse_Quality.inst.cfg

@@ -1,15 +1,45 @@
 [general]
 version = 4
-name = Extra Coarse
+name = Draft
 definition = tizyx_evy
 
 [metadata]
 setting_version = 8
 type = quality
 quality_type = extra coarse
-weight = -4
+weight = -2
 global_quality = True
 
 [values]
-layer_height = 0.5
+layer_height = 0.4
 layer_height_0 = =layer_height
+initial_layer_line_width_factor = 90
+infill_overlap = 15
+material_flow_layer_0 = 93
+material_flow = 99
+retractation_amount = 5
+retractation_speed = 60
+speed_wall_0 = 45
+speed_wall_x = 50
+speed_topbottom  = 45
+support_enable= True
+support_angle = 70
+adhesion_type = skirt
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 2
+speed_print = 60
+cool_fan_speed_0 = 10
+cool_min_layer_time = 12
+layer_start_x = 250
+layer_start_y = 250
+coasting_enable = False
+wall_line_count = 2
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True

resources/quality/tizyx/tizyx_evy/tizyx_evy_global_High_Quality.inst.cfg

@@ -13,3 +13,33 @@ global_quality = True
 [values]
 layer_height = 0.1
 layer_height_0 = 0.1
+initial_layer_line_width_factor = 90
+infill_overlap = 15
+material_flow_layer_0 = 93
+material_flow = 99
+retractation_amount = 5
+retractation_speed = 60
+speed_wall_0 = 45
+speed_wall_x = 50
+speed_topbottom  = 45
+support_enable= True
+support_angle = 70
+adhesion_type = skirt
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 2
+speed_print = 60
+cool_fan_speed_0 = 10
+cool_min_layer_time = 12
+layer_start_x = 250
+layer_start_y = 250
+coasting_enable = False
+wall_line_count = 2
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True

resources/quality/tizyx/tizyx_evy/tizyx_evy_global_Normal_Quality.inst.cfg

@@ -13,3 +13,33 @@ global_quality = True
 [values]
 layer_height = 0.2
 layer_height_0 = 0.25
+initial_layer_line_width_factor = 90
+infill_overlap = 15
+material_flow_layer_0 = 93
+material_flow = 99
+retractation_amount = 5
+retractation_speed = 60
+speed_wall_0 = 45
+speed_wall_x = 50
+speed_topbottom  = 45
+support_enable= True
+support_angle = 70
+adhesion_type = skirt
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 2
+speed_print = 60
+cool_fan_speed_0 = 10
+cool_min_layer_time = 12
+layer_start_x = 250
+layer_start_y = 250
+coasting_enable = False
+wall_line_count = 2
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True

resources/quality/tizyx/tizyx_evy_dual/abs/tizyx_evy_dual_classic_abs_high.inst.cfg

@@ -25,18 +25,16 @@ prime_tower_flow = 100
 prime_tower_min_volume = 80
 prime_tower_wipe_enabled = False
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 2
-retraction_speed = 30
 skin_angles = []
 skirt_line_count = 2
 speed_print = 60
 speed_topbottom = 50
 speed_wall_0 = 40
-switch_extruder_retraction_amount = 0
-switch_extruder_retraction_speeds = 40
 top_layers = 4
 wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/abs/tizyx_evy_dual_classic_abs_normal.inst.cfg

@@ -25,18 +25,16 @@ prime_tower_flow = 100
 prime_tower_min_volume = 80
 prime_tower_wipe_enabled = False
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 2
-retraction_speed = 30
 skin_angles = []
 skirt_line_count = 2
 speed_print = 60
 speed_topbottom = 50
 speed_wall_0 = 40
-switch_extruder_retraction_amount = 0
-switch_extruder_retraction_speeds = 40
 top_layers = 4
 wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/abs/tizyx_evy_dual_direct_drive_abs_high.inst.cfg

@@ -21,12 +21,10 @@ prime_tower_flow = 110
 prime_tower_min_volume = 50
 prime_tower_wipe_enabled = True
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_extra_prime_amount = 0
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
-retraction_speed = 30
 skirt_brim_minimal_length = 100
-switch_extruder_retraction_amount = 0
+switch_extruder_retraction_amount = 72
-switch_extruder_retraction_speeds = 40
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/abs/tizyx_evy_dual_direct_drive_abs_normal.inst.cfg

@@ -21,12 +21,10 @@ prime_tower_flow = 110
 prime_tower_min_volume = 50
 prime_tower_wipe_enabled = True
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_extra_prime_amount = 0
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
-retraction_speed = 30
 skirt_brim_minimal_length = 100
-switch_extruder_retraction_amount = 0
+switch_extruder_retraction_amount = 72
-switch_extruder_retraction_speeds = 40
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/flex/tizyx_evy_dual_classic_flex_flex.inst.cfg

@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = Flex and PLA
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -2
+material = tizyx_flex
+variant = Classic Extruder
+
+[values]
+cool_fan_speed_0 = 100
+cool_min_layer_time = 10
+default_material_print_temperature = 210
+fill_outline_gaps = True
+infill_angles = []
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 100
+prime_tower_min_volume = 80
+prime_tower_wipe_enabled = False
+retract_at_layer_change = True
+retraction_enable = True
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+retraction_min_travel = 2
+skin_angles = []
+skirt_line_count = 2
+speed_print = 60
+speed_topbottom = 50
+speed_wall_0 = 40
+top_layers = 4
+wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/flex/tizyx_evy_dual_classic_flex_flex_only.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Flex Only
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = coarse
+weight = -3
+material = tizyx_flex
+variant = Classic Extruder
+
+[values]
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/flex/tizyx_evy_dual_direct_drive_flex_flex.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Flex and PLA
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -2
+material = tizyx_flex
+variant = Direct Drive
+
+[values]
+default_material_print_temperature = 210
+infill_angles = []
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 110
+prime_tower_min_volume = 50
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_enable = True
+retraction_extra_prime_amount = 0
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+speed_print = 30
+skirt_brim_minimal_length = 100
+switch_extruder_retraction_amount = 72
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/flex/tizyx_evy_dual_direct_drive_flex_flex_only.inst.cfg

@@ -0,0 +1,16 @@
+[general]
+version = 4
+name = Flex Only
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = coarse
+weight = -3
+material = tizyx_flex
+variant = Direct Drive
+
+[values]
+switch_extruder_retraction_amount = 72
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/petg/tizyx_evy_dual_classic_petg_high.inst.cfg

@@ -25,18 +25,16 @@ prime_tower_flow = 100
 prime_tower_min_volume = 80
 prime_tower_wipe_enabled = False
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 2
-retraction_speed = 30
 skin_angles = []
 skirt_line_count = 2
 speed_print = 60
 speed_topbottom = 50
 speed_wall_0 = 40
-switch_extruder_retraction_amount = 0
-switch_extruder_retraction_speeds = 40
 top_layers = 4
 wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/petg/tizyx_evy_dual_classic_petg_normal.inst.cfg

@@ -25,18 +25,16 @@ prime_tower_flow = 100
 prime_tower_min_volume = 80
 prime_tower_wipe_enabled = False
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 2
-retraction_speed = 30
 skin_angles = []
 skirt_line_count = 2
 speed_print = 60
 speed_topbottom = 50
 speed_wall_0 = 40
-switch_extruder_retraction_amount = 0
-switch_extruder_retraction_speeds = 40
 top_layers = 4
 wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/petg/tizyx_evy_dual_direct_drive_petg_high.inst.cfg

@@ -21,12 +21,10 @@ prime_tower_flow = 110
 prime_tower_min_volume = 50
 prime_tower_wipe_enabled = True
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_extra_prime_amount = 0
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
-retraction_speed = 30
 skirt_brim_minimal_length = 100
-switch_extruder_retraction_amount = 0
+switch_extruder_retraction_amount = 72
-switch_extruder_retraction_speeds = 40
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/petg/tizyx_evy_dual_direct_drive_petg_normal.inst.cfg

@@ -21,12 +21,10 @@ prime_tower_flow = 110
 prime_tower_min_volume = 50
 prime_tower_wipe_enabled = True
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_extra_prime_amount = 0
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
-retraction_speed = 30
 skirt_brim_minimal_length = 100
-switch_extruder_retraction_amount = 0
+switch_extruder_retraction_amount = 72
-switch_extruder_retraction_speeds = 40
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla/tizyx_evy_dual_classic_pla_flex.inst.cfg

@@ -25,18 +25,16 @@ prime_tower_flow = 100
 prime_tower_min_volume = 80
 prime_tower_wipe_enabled = False
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 2
-retraction_speed = 30
 skin_angles = []
 skirt_line_count = 2
 speed_print = 60
 speed_topbottom = 50
 speed_wall_0 = 40
-switch_extruder_retraction_amount = 0
-switch_extruder_retraction_speeds = 40
 top_layers = 4
 wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla/tizyx_evy_dual_classic_pla_high.inst.cfg

@@ -25,18 +25,16 @@ prime_tower_flow = 100
 prime_tower_min_volume = 80
 prime_tower_wipe_enabled = False
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 2
-retraction_speed = 30
 skin_angles = []
 skirt_line_count = 2
 speed_print = 60
 speed_topbottom = 50
 speed_wall_0 = 40
-switch_extruder_retraction_amount = 0
-switch_extruder_retraction_speeds = 40
 top_layers = 4
 wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla/tizyx_evy_dual_classic_pla_normal.inst.cfg

@@ -25,18 +25,16 @@ prime_tower_flow = 100
 prime_tower_min_volume = 80
 prime_tower_wipe_enabled = False
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
 retraction_min_travel = 2
-retraction_speed = 30
 skin_angles = []
 skirt_line_count = 2
 speed_print = 60
 speed_topbottom = 50
 speed_wall_0 = 40
-switch_extruder_retraction_amount = 0
-switch_extruder_retraction_speeds = 40
 top_layers = 4
 wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla/tizyx_evy_dual_classic_pla_pva.inst.cfg

@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = PVA and PLA
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pla
+variant = Classic Extruder
+
+[values]
+cool_fan_speed_0 = 100
+cool_min_layer_time = 10
+default_material_print_temperature = 210
+fill_outline_gaps = True
+infill_angles = []
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 100
+prime_tower_min_volume = 80
+prime_tower_wipe_enabled = False
+retract_at_layer_change = True
+retraction_enable = True
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+retraction_min_travel = 2
+skin_angles = []
+skirt_line_count = 2
+speed_print = 60
+speed_topbottom = 50
+speed_wall_0 = 40
+top_layers = 4
+wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla/tizyx_evy_dual_direct_drive_pla_flex.inst.cfg

@@ -21,13 +21,11 @@ prime_tower_flow = 110
 prime_tower_min_volume = 50
 prime_tower_wipe_enabled = True
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_extra_prime_amount = 0
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
-retraction_speed = 30
 speed_print = 30
 skirt_brim_minimal_length = 100
-switch_extruder_retraction_amount = 0
+switch_extruder_retraction_amount = 72
-switch_extruder_retraction_speeds = 40
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla/tizyx_evy_dual_direct_drive_pla_high.inst.cfg

@@ -21,12 +21,10 @@ prime_tower_flow = 110
 prime_tower_min_volume = 50
 prime_tower_wipe_enabled = True
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_extra_prime_amount = 0
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
-retraction_speed = 30
 skirt_brim_minimal_length = 100
-switch_extruder_retraction_amount = 0
+switch_extruder_retraction_amount = 72
-switch_extruder_retraction_speeds = 40
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla/tizyx_evy_dual_direct_drive_pla_normal.inst.cfg

@@ -21,12 +21,10 @@ prime_tower_flow = 110
 prime_tower_min_volume = 50
 prime_tower_wipe_enabled = True
 retract_at_layer_change = True
-retraction_amount = 2.5
 retraction_enable = True
 retraction_extra_prime_amount = 0
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = False
-retraction_speed = 30
 skirt_brim_minimal_length = 100
-switch_extruder_retraction_amount = 0
+switch_extruder_retraction_amount = 72
-switch_extruder_retraction_speeds = 40
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla/tizyx_evy_dual_direct_drive_pla_pva.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = PVA and PLA
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -2
+material = generic_pla
+variant = Direct Drive
+
+[values]
+default_material_print_temperature = 210
+infill_angles = []
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 110
+prime_tower_min_volume = 50
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_enable = True
+retraction_extra_prime_amount = 0
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+speed_print = 30
+skirt_brim_minimal_length = 100
+switch_extruder_retraction_amount = 72
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla_bois/tizyx_evy_dual_classic_pla_bois_flex.inst.cfg

@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = Flex and PLA
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -2
+material = tizyx_pla_bois
+variant = Classic Extruder
+
+[values]
+cool_fan_speed_0 = 100
+cool_min_layer_time = 10
+default_material_print_temperature = 210
+fill_outline_gaps = True
+infill_angles = []
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 100
+prime_tower_min_volume = 80
+prime_tower_wipe_enabled = False
+retract_at_layer_change = True
+retraction_enable = True
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+retraction_min_travel = 2
+skin_angles = []
+skirt_line_count = 2
+speed_print = 60
+speed_topbottom = 50
+speed_wall_0 = 40
+top_layers = 4
+wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla_bois/tizyx_evy_dual_classic_pla_bois_high.inst.cfg

@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_pla_bois
+variant = Classic Extruder
+
+[values]
+cool_fan_speed_0 = 100
+cool_min_layer_time = 10
+default_material_print_temperature = 210
+fill_outline_gaps = True
+infill_angles = []
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 100
+prime_tower_min_volume = 80
+prime_tower_wipe_enabled = False
+retract_at_layer_change = True
+retraction_enable = True
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+retraction_min_travel = 2
+skin_angles = []
+skirt_line_count = 2
+speed_print = 60
+speed_topbottom = 50
+speed_wall_0 = 40
+top_layers = 4
+wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla_bois/tizyx_evy_dual_classic_pla_bois_normal.inst.cfg

@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = Normal
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+material = tizyx_pla_bois
+variant = Classic Extruder
+
+[values]
+cool_fan_speed_0 = 100
+cool_min_layer_time = 10
+default_material_print_temperature = 210
+fill_outline_gaps = True
+infill_angles = []
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 100
+prime_tower_min_volume = 80
+prime_tower_wipe_enabled = False
+retract_at_layer_change = True
+retraction_enable = True
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+retraction_min_travel = 2
+skin_angles = []
+skirt_line_count = 2
+speed_print = 60
+speed_topbottom = 50
+speed_wall_0 = 40
+top_layers = 4
+wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla_bois/tizyx_evy_dual_direct_drive_pla_bois_flex.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = Flex and PLA
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -2
+material = tizyx_pla_bois
+variant = Direct Drive
+
+[values]
+default_material_print_temperature = 210
+infill_angles = []
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 110
+prime_tower_min_volume = 50
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_enable = True
+retraction_extra_prime_amount = 0
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+speed_print = 30
+skirt_brim_minimal_length = 100
+switch_extruder_retraction_amount = 72
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla_bois/tizyx_evy_dual_direct_drive_pla_bois_high.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+version = 4
+name = High
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = high
+weight = 1
+material = tizyx_pla_bois
+variant = Direct Drive
+
+[values]
+default_material_print_temperature = 210
+infill_angles = []
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 110
+prime_tower_min_volume = 50
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_enable = True
+retraction_extra_prime_amount = 0
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+skirt_brim_minimal_length = 100
+switch_extruder_retraction_amount = 72
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pla_bois/tizyx_evy_dual_direct_drive_pla_bois_normal.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+version = 4
+name = Normal
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = normal
+weight = 0
+material = tizyx_pla_bois
+variant = Direct Drive
+
+[values]
+default_material_print_temperature = 210
+infill_angles = []
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 110
+prime_tower_min_volume = 50
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_enable = True
+retraction_extra_prime_amount = 0
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+skirt_brim_minimal_length = 100
+switch_extruder_retraction_amount = 72
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pva/tizyx_evy_dual_classic_pva_pva.inst.cfg

@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = PVA and PLA
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -2
+material = tizyx_pva
+variant = Classic Extruder
+
+[values]
+cool_fan_speed_0 = 100
+cool_min_layer_time = 10
+default_material_print_temperature = 210
+fill_outline_gaps = True
+infill_angles = []
+infill_sparse_density = 15
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 100
+prime_tower_min_volume = 80
+prime_tower_wipe_enabled = False
+retract_at_layer_change = True
+retraction_enable = True
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+retraction_min_travel = 2
+skin_angles = []
+skirt_line_count = 2
+speed_print = 60
+speed_topbottom = 50
+speed_wall_0 = 40
+top_layers = 4
+wall_line_count = 2
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/pva/tizyx_evy_dual_direct_drive_pva_pva.inst.cfg

@@ -0,0 +1,31 @@
+[general]
+version = 4
+name = PVA and PLA
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -2
+material = tizyx_pva
+variant = Direct Drive
+
+[values]
+default_material_print_temperature = 210
+infill_angles = []
+material_final_print_temperature = 210
+material_initial_print_temperature = 210
+material_standby_temperature = 210
+prime_tower_flow = 110
+prime_tower_min_volume = 50
+prime_tower_wipe_enabled = True
+retract_at_layer_change = True
+retraction_enable = True
+retraction_extra_prime_amount = 0
+retraction_hop_enabled = True
+retraction_hop_only_when_collides = False
+speed_print = 30
+skirt_brim_minimal_length = 100
+switch_extruder_retraction_amount = 72
+switch_extruder_retraction_speeds = 70

resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Only_Quality.inst.CFG

@@ -19,12 +19,22 @@ skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
-retraction_amount = 2.5
 retraction_min_travel = 2
-retraction_speed = 30
 speed_print = 30
 speed_topbottom = 50
 speed_wall_0 = 40
 top_layers = 4
 wall_line_count = 2
 cool_min_layer_time = 11
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+support_enable = True
+prime_tower_circular = True
+prime_tower_enable = True
+prime_tower_position_x = 127.5
+prime_tower_position_y = =math.ceil(250-prime_tower_size)
+prime_tower_size = 35
+prime_tower_flow = 110
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True

resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Flex_Quality.inst.cfg

@@ -16,6 +16,14 @@ adhesion_type = skirt
 layer_height = 0.2
 layer_height_0 = 0.25
 prime_tower_enable = True
-prime_tower_position_x = 180
+prime_tower_position_x = 127.5
-prime_tower_position_y = 180
+prime_tower_position_y = =math.ceil(250-prime_tower_size)
-prime_tower_size = 29
+prime_tower_size = 35
+prime_tower_flow = 110
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+support_enable = True
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True
+retraction_hop_enabled = False

resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_High_Quality.inst.cfg

@@ -16,6 +16,38 @@ adhesion_type = skirt
 layer_height = 0.1
 layer_height_0 = 0.1
 prime_tower_enable = True
-prime_tower_position_x = 180
+prime_tower_position_x = 127.5
-prime_tower_position_y = 180
+prime_tower_position_y = =math.ceil(250-prime_tower_size)
-prime_tower_size = 29
+prime_tower_size = 35
+prime_tower_flow = 110
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+support_enable = True
+initial_layer_line_width_factor = 90
+infill_overlap = 15
+material_flow_layer_0 = 93
+material_flow = 99
+retractation_amount = 5
+retractation_speed = 60
+speed_wall_0 = 45
+speed_wall_x = 50
+speed_topbottom  = 45
+support_angle = 70
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 2
+speed_print = 60
+cool_fan_speed_0 = 10
+cool_min_layer_time = 12
+layer_start_x = 250
+layer_start_y = 250
+coasting_enable = False
+top_layers = 4
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True
+retraction_hop_enabled = False

resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_Normal_Quality.inst.cfg

@@ -16,6 +16,38 @@ adhesion_type = skirt
 layer_height = 0.2
 layer_height_0 = 0.25
 prime_tower_enable = True
-prime_tower_position_x = 180
+prime_tower_position_x = 127.5
-prime_tower_position_y = 180
+prime_tower_position_y = =math.ceil(250-prime_tower_size)
-prime_tower_size = 29
+prime_tower_size = 35
+prime_tower_flow = 110
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+support_enable = True
+initial_layer_line_width_factor = 90
+infill_overlap = 15
+material_flow_layer_0 = 93
+material_flow = 99
+retractation_amount = 5
+retractation_speed = 60
+speed_wall_0 = 45
+speed_wall_x = 50
+speed_topbottom  = 45
+support_angle = 70
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 2
+speed_print = 60
+cool_fan_speed_0 = 10
+cool_min_layer_time = 12
+layer_start_x = 250
+layer_start_y = 250
+coasting_enable = False
+top_layers = 4
+wall_line_count = 2
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True
+retraction_hop_enabled = False

resources/quality/tizyx/tizyx_evy_dual/tizyx_evy_dual_global_PVA_Quality.inst.cfg

@@ -0,0 +1,30 @@
+[general]
+version = 4
+name = PVA and PLA
+definition = tizyx_evy_dual
+
+[metadata]
+setting_version = 7
+type = quality
+quality_type = draft
+weight = -2
+global_quality = True
+
+[values]
+adhesion_extruder_nr = 0
+adhesion_type = skirt
+layer_height = 0.2
+layer_height_0 = 0.25
+prime_tower_circular = True
+prime_tower_enable = True
+prime_tower_position_x = 127.5
+prime_tower_position_y = =math.ceil(250-prime_tower_size)
+prime_tower_size = 35
+prime_tower_flow = 110
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+support_enable = True
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True
+retraction_hop_enabled = False

resources/quality/tizyx/tizyx_k25/tizyx_k25_high.inst.cfg

@@ -0,0 +1,41 @@
+[general]
+version = 4
+name = High
+definition = tizyx_k25
+
+[metadata]
+quality_type = draft
+setting_version = 7
+type = quality
+global_quality = True
+
+[values]
+layer_height = 0.1
+initial_layer_line_width_factor = 90
+infill_overlap = 15
+material_flow_layer_0 = 93
+material_flow = 99
+speed_wall_0 = 45
+speed_wall_x = 50
+speed_topbottom  = 45
+support_enable= True
+support_angle = 70
+adhesion_type = skirt
+skirt_line_count = 2
+skirt_gap = 2
+fill_outline_gaps = True
+infill_sparse_density = 15
+material_diameter = 1.75
+retraction_min_travel = 2
+speed_print = 60
+cool_fan_speed_0 = 10
+cool_min_layer_time = 12
+layer_start_x = 250
+layer_start_y = 250
+coasting_enable = False
+wall_line_count = 2
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True

resources/quality/tizyx/tizyx_k25/tizyx_k25_normal.inst.cfg

@@ -1,6 +1,6 @@
 [general]
 version = 4
-name = TiZYX K25 Normal
+name = Normal
 definition = tizyx_k25
 
 [metadata]
@@ -10,18 +10,32 @@ type = quality
 global_quality = True
 
 [values]
+layer_height = 0.2
+initial_layer_line_width_factor = 90
+infill_overlap = 15
+material_flow_layer_0 = 93
+material_flow = 99
+speed_wall_0 = 45
+speed_wall_x = 50
+speed_topbottom  = 45
+support_enable= True
+support_angle = 70
 adhesion_type = skirt
 skirt_line_count = 2
 skirt_gap = 2
 fill_outline_gaps = True
 infill_sparse_density = 15
 material_diameter = 1.75
-retraction_amount = 2.5
 retraction_min_travel = 2
-retraction_speed = 30
 speed_print = 60
-speed_topbottom = 50
+cool_fan_speed_0 = 10
-speed_wall_0 = 40
+cool_min_layer_time = 12
-top_layers = 4
+layer_start_x = 250
+layer_start_y = 250
+coasting_enable = False
 wall_line_count = 2
-cool_min_layer_time = 11
+material_print_temperature = =default_material_print_temperature 
+material_initial_print_temperature = =material_print_temperature 
+material_final_print_temperature = =material_print_temperature 
+z_seam_corner = z_seam_corner_none
+optimize_wall_printing_order = True

resources/variants/tizyx_evy_dual_classic.inst.cfg

@@ -11,3 +11,5 @@ hardware_type = nozzle
 
 [values]
 machine_nozzle_size = 0.4
+switch_extruder_retraction_amount = 100
+switch_extruder_retraction_speeds = 70

resources/variants/tizyx_evy_dual_direct_drive.inst.cfg

@@ -11,3 +11,5 @@ hardware_type = nozzle
 
 [values]
 machine_nozzle_size = 0.4
+switch_extruder_retractation_amount = 72
+switch_extruder_retractation_speeds = 70