3D-printing/Cura
1
0
Fork 0
mirror of https://github.com/Ultimaker/Cura.git synced 2025-08-08 22:35:03 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions 6

major updates

Browse source
This commit is contained in:
just-trey 2022-12-07 12:18:28 -05:00
parent a26b6e7ac3
commit 016ab4714d
2 changed files with 82 additions and 27 deletions
Download patch file Download diff file Expand all files Collapse all files

107
resources/definitions/ankermake_m5.def.json
View file

@ -19,44 +19,99 @@
"overrides": {
"machine_name": { "default_value": "AnkerMake M5" },
"machine_width": { "default_value": 235 },
"machine_height": { "default_value": 250 },
"machine_depth": { "default_value": 235 },
"machine_heated_bed": { "default_value": true },
"machine_start_gcode": {
"default_value": "M104 S{material_print_temperature_layer_0} ; set final nozzle temp\nM190 S{material_bed_temperature_layer_0} ; set and wait for nozzle temp to stabilize\nM109 S{material_print_temperature_layer_0} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)"
},
"material_diameter": { "default_value": 1.75 },
"speed_print": { "value": 250.0, "maximum_value_warning": 255 },
"speed_infill": { "maximum_value_warning": 255 },
"speed_topbottom": { "value": 150.0 },
"speed_travel": { "value": 250.0 },
"speed_wall": { "value": 150.0, "maximum_value_warning": 255 },
"speed_wall_x": { "value": 250.0, "maximum_value_warning": 255 },
"machine_width": { "default_value": 235 },
"machine_depth": { "default_value": 235 },
"machine_height": { "default_value": 250 },
"machine_heated_bed": { "default_value": true },
"gantry_height": { "value": 25 },
"xy_offset_layer_0": { "value": -0.2 },
"hole_xy_offset": { "value": 0.2 },
"top_bottom_thickness": { "value": "layer_height * 4" },
"skin_monotonic": { "default_value": true },
"infill_sparse_density": { "value": 25 },
"infill_pattern": {
"value": "'lines' if infill_sparse_density >= 25 else 'grid'"
},
"zig_zaggify_infill": {
"value": "infill_pattern == 'cross' or infill_pattern == 'cross_3d' or infill_pattern == 'lines'"
},
"material_print_temperature": {
"maximum_value_warning": "260"
},
"material_print_temperature_layer_0": {
"value": "material_print_temperature + 5",
"maximum_value_warning": "260"
"maximum_value_warning": "270"
},
"material_initial_print_temperature": {
"value": "material_print_temperature"
},
"material_final_print_temperature": {
"value": "material_print_temperature"
},
"material_bed_temperature": { "maximum_value_warning": "110" },
"material_bed_temperature_layer_0": {
"value": "material_bed_temperature + 5",
"maximum_value_warning": "110"
"material_bed_temperature_layer_0": { "maximum_value_warning": "110" },
"skin_material_flow": { "value": 97 },
"material_flow_layer_0": { "value": 115 },
"speed_print": { "value": 250.0, "maximum_value_warning": 255 },
"speed_infill": { "maximum_value_warning": 255 },
"speed_wall": { "value": 150.0, "maximum_value_warning": 255 },
"speed_wall_x": { "value": 250.0, "maximum_value_warning": 255 },
"speed_support": { "maximum_value_warning": 255 },
"speed_support_infill": { "maximum_value_warning": 255 },
"speed_support_interface": { "maximum_value_warning": 255 },
"speed_support_roof": { "maximum_value_warning": 255 },
"speed_support_bottom": { "maximum_value_warning": 255 },
"speed_topbottom": { "value": 150.0 },
"acceleration_print": { "value": "2500" },
"speed_travel": { "value": 250.0 },
"retraction_amount": { "default_value": 1.5 },
"retraction_speed": { "default_value": 60 },
"retraction_combing": {
"value": "'off' if retraction_hop_enabled else 'infill'"
},
"material_flow_layer_0": { "value": 120 },
"retraction_hop": { "value": 0.2 },
"cool_min_layer_time": { "value": 6 },
"cool_min_speed": { "value": 30 },
"retraction_amount": { "default_value": 1.5 },
"retraction_speed": { "default_value": 70 },
"acceleration_print": { "value": "2500" },
"support_angle": {
"value": "math.floor(math.degrees(math.atan(line_width / 2.0 /layer_height)))"
},
"support_infill_rate": {
"value": "0 if support_enable and support_structure == 'tree' else 20"
},
"support_z_distance": { "value": "layer_height * 2" },
"support_xy_distance": { "value": "wall_line_width_0 * 2" },
"support_top_distance": {
"value": "extruderValue(support_roof_extruder_nr if support_roof_enable else support_infill_extruder_nr, 'support_z_distance') + (layer_height if support_structure == 'tree' else 0)"
},
"support_xy_overrides_z": { "value": "'xy_overrides_z'" },
"support_xy_distance_overhang": { "value": "wall_line_width_0" },
"support_brim_width": { "value": 4.0 },
"minimum_support_area": { "value": 2 },
"support_interface_enable": { "value": true },
"support_roof_enable": { "value": true },
"support_interface_skip_height": { "value": 0.2 },
"support_interface_density": { "value": 33.333 },
"support_interface_pattern": { "value": "'grid'" },
"minimum_interface_area": { "value": 10 },
"adhesion_type": { "default_value": "skirt" },
"retraction_combing": { "value": "infill" },
"machine_start_gcode": {
"default_value": "M104 S{material_print_temperature_layer_0} ; set final nozzle temp\nM190 S{material_bed_temperature_layer_0} ; set and wait for nozzle temp to stabilize\nM109 S{material_print_temperature_layer_0} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)"
},
"machine_end_gcode": {
"default_value": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84"
},
"gantry_height": { "value": 25 }
"skirt_line_count": { "value": 3 },
"wall_overhang_angle": { "value": 55 },
"wall_overhang_speed_factor": { "value": 55 },
"small_hole_max_size": { "value": 10 },
"small_feature_speed_factor_0": { "value": 50 }
}
}

2
resources/quality/ankermake_m5/ankermake_m5_normal.inst.cfg
View file

@ -12,4 +12,4 @@ weight = 0
[values]
layer_height = 0.2
layer_height_0 = 0.24
layer_height_0 = 0.2