3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-22 22:24:03 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions
Configurations/config/examples/Creality/Ender-5 S1
History
Scott Lahteine 29dbaf9c78 ♻️ MINIMUM_STEPPER_PULSE_NS 
MarlinFirmware/Marlin#27113

Co-Authored-By: Mihai <299015+mh-dm@users.noreply.github.com>
2024-05-30 10:00:39 -05:00
..
Configuration.h 📝 MPCTEMP is tested 2024-05-12 17:39:21 -05:00
Configuration_adv.h ♻️ MINIMUM_STEPPER_PULSE_NS 2024-05-30 10:00:39 -05:00
README.md ✨ Creality Ender-5 S1 2023-02-14 00:44:49 -06:00

README.md

Creality Ender-5 S1

The bootloader on the stock board has special requirements and requires a flag to be set in the EEPROM before it will install the firmware.

  • The built firmware bin file must be placed into a folder named STM32F4_UPDATE on the SD card.
  • Connect to the printer over serial and send M936 V2. (You can also run a G-code file containing M936 V2.)
  • Make sure to always flash a working version of Marlin with OTA_FIRMWARE_UPDATE enabled!
  • If for any reason you can't run M936 V2 then you'll need to run a sketch to write 0x02 to EEPROM address 90 (e.g., with BL24CXX::write).