3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-23 14:44:21 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions
Configurations/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)
History
Scott Lahteine 29dbaf9c78 ♻️ MINIMUM_STEPPER_PULSE_NS 
MarlinFirmware/Marlin#27113

Co-Authored-By: Mihai <299015+mh-dm@users.noreply.github.com>
2024-05-30 10:00:39 -05:00
..
Configuration.h 📝 MPCTEMP is tested 2024-05-12 17:39:21 -05:00
Configuration_adv.h ♻️ MINIMUM_STEPPER_PULSE_NS 2024-05-30 10:00:39 -05:00
README.md 📝 Hyphen for Ender-# 2024-05-12 17:01:20 -05:00

README.md

Ender-5 Plus Configurations for Marlin Firmware

Important

The Ender-5 LCD stock firmware is only compatible with Creality firmware. The LCD standard UI will not function. This is expected. With the stock LCD firmware Marlin can only be controlled from a host over USB.

Marlin DGUS UI "Reloaded" Instructions

The Ender-5 stock LCD can optionally use a customized Marlin DGUS interface. To use DGUS_LCD_UI RELOADED the stock LCD must be flashed with custom firmware.

Get the DWIN_SET

Prepare the SD Card

  • Format a Micro-SD card, selecting FAT32 for the file system and 4096 bytes sector size. These parameters are required for the procedure to work.
  • Copy the DWIN_SET folder to the root of the Micro-SD card.
  • Unmount and unplug your Micro-SD card.

Flash the touchscreen

  • Turn off and unplug your printer (both power and USB).
  • You will need to access the Micro-SD slot on the back of the touchscreen (not the one that may be on your mainboard). If necessary, open the printer to access this slot.
  • Insert the Micro-SD card into the screen SD slot.
  • Plug the printer's power cable back in (but not the USB cable) and turn on the printer.
  • After a few seconds the screen background will turn blue and the firmware flash will begin. Do not cut power to the printer while the procedure is running!
  • When the procedure ends the screen will display a blue background with an END message on the first line and a summary.
  • Turn off the printer. Remove the Micro-SD card from the touchscreen. Reassemble the printer if needed.
  • The touch-screen firmware is now up-to-date.

Restoring Factory Firmware

The original firmware can be restored by downloading the Ender-5 Plus firmware from Creality. You can follow the same LCD flashing procedure using the Creality-provided DWIN_SET folder.