Configurations/config/examples/Creality/CR-10 Max

CR-10 MAX Configurations for Marlin Firmware

Marlin DGUS UI "Reloaded" Instructions

To use DGUS_LCD_UI RELOADED the stock LCD must be flashed with custom firmware.

Get the DWIN_SET

• Download the DWIN_SET archive from https://github.com/Neo2003/DGUS-reloaded/releases/download/1.0.3/DWIN_SET.tar.gz
• Extract the contents of the archive. You should now have a folder called DWIN_SET.

Prepare the SD Card

• Format a Micro-SD card, selecting FAT32 for the file system and 4096 bytes sector size. These parameters are required for the procedure to work.
• Copy the DWIN_SET folder to the root of the Micro-SD card.
• Unmount and unplug your Micro-SD card.

Flash the touchscreen

• Turn off and unplug your printer (both power and USB).
• You will need to access the Micro-SD slot on the back of the touchscreen (not the one that may be on your mainboard). If necessary, open the printer to access this slot.
• Insert the Micro-SD card into the screen SD slot.
• Plug the printer's power cable back in (but not the USB cable) and turn on the printer.
• After a few seconds the screen background will turn blue and the firmware flash will begin. Do not cut power to the printer while the procedure is running!
• When the procedure ends the screen will display a blue background with an END message on the first line and a summary.
• Turn off the printer. Remove the Micro-SD card from the touchscreen. Reassemble the printer if needed.
• The touch-screen firmware is now up-to-date.