3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-07-06 22:47:35 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions
Configurations/config/examples/BIQU/BX
History
Scott Lahteine 29dbaf9c78 ♻️ MINIMUM_STEPPER_PULSE_NS 
MarlinFirmware/Marlin#27113

Co-Authored-By: Mihai <299015+mh-dm@users.noreply.github.com>
2024-05-30 10:00:39 -05:00
..
Configuration.h 📝 MPCTEMP is tested 2024-05-12 17:39:21 -05:00
Configuration_adv.h ♻️ MINIMUM_STEPPER_PULSE_NS 2024-05-30 10:00:39 -05:00
README.md ✨ Add BIQU BX Z / E1 Motor Swap (#1038) 2024-04-09 23:24:32 -07:00

README.md

BIQU BX Configuration

In Configuration.h enable the MOTHERBOARD BOARD_BTT_SKR_SE_BX_V3 option at the top to specify the BTT SKR SE BX V3.0 motherboard, otherwise the V2.0 board will be applied (slightly farther down).

Enable the BX_ALL_METAL_HOTEND option to permit higher printing temperatures for the newer H2 extruder with an all-metal heatbreak.

Enable the BX_SWAP_ZM_E1M option to swap Z and E1 motors if they swapped from the factory. This will fix potential issues with G34 - Z Steppers Auto-Alignment not working correctly.

Homing with a Probe

This configuration retains the use of homing with a Z limit switch. If you If you want to home with the inductive probe, remove your Z limit switch & bracket and enable (uncomment) USE_PROBE_FOR_Z_HOMING and Z_SAFE_HOMING.