3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-08 22:35:18 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions
Configurations/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 v3
History
Scott Lahteine 815bbdb15e ✨ ULTIPANEL_FLOWPERCENT 
MarlinFirmware/Marlin#26627

Co-Authored-By: German Borisov <936817+borisov-german@users.noreply.github.com>
2024-01-12 00:26:03 -06:00
..
_Bootscreen.h ✨ CR-10 S5 with BTT SKR E3 mini V3 (#780) 2022-07-20 03:04:53 -05:00
_Statusscreen.h ✨ CR-10 S5 with BTT SKR E3 mini V3 (#780) 2022-07-20 03:04:53 -05:00
Configuration.h ✨ EDITABLE_STEPS_PER_UNIT (2) 2024-01-10 00:33:04 -06:00
Configuration_adv.h ✨ ULTIPANEL_FLOWPERCENT 2024-01-12 00:26:03 -06:00
README.md ✨ CR-10 S5 with BTT SKR E3 mini V3 (#780) 2022-07-20 03:04:53 -05:00

README.md

CR-10 S5 with BTT SKR E3 mini v3.0:

  • BLtouch v3.1 (conneted to the Z endstop pin)
  • Stock LCD (connected to the LCD's EXT3 spare port, with one single straight ribbon cable)
  • Bondtech or stock extruder
  • Bowden setup
  • All 4 fans are PWM controlled.

Flashing Mainboard Firmware

The bootloader which handles flashing new firmware on this board remembers the last filename you used.

Where to put the firmware file on the SDCard:

Put the firmware.bin file into the root folder.