3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-05 04:54:12 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions
Configurations/config/examples/BIQU/B1
History
Keith Bennett 870f4534ba
🔥 Remove DISKIO_HOST_DRIVE (#1035) 
MarlinFirmware/Marlin#19939
2024-05-12 15:11:21 -05:00
..
Configuration.h 🔧 Raise by BED_TRAMMING_Z_HOP 2024-05-01 16:21:00 -05:00
Configuration_adv.h 🔥 Remove DISKIO_HOST_DRIVE (#1035) 2024-05-12 15:11:21 -05:00
README.md 🔧 Enable MicroProbe V2 on Hurakan (#1007) 2024-02-01 15:27:09 -06:00

README.md

BIQU B1 Firmware

In Configuration.h enable the MOTHERBOARD BOARD_BTT_SKR_V1_4 option at the top to specify the BTT SKR V1.4 motherboard, otherwise the V2.0 board will be applied (slightly farther down).

For the SKR V2.0-based config, flash drive support is enabled by default. Jumpers to enable support may not have been installed correctly from the factory, so follow BIQU's instructions, starting with Step 2 if flash drive support is not working correctly.

BLTouch Probe Support

Uncomment B1_USE_BLTOUCH for probe customization.

This configuration retains the use of homing with a Z limit switch. If you want to home with the BLTouch probe, remove your Z limit switch & bracket and enable (uncomment) USE_PROBE_FOR_Z_HOMING and Z_SAFE_HOMING. Change Z_MIN_ENDSTOP_HIT_STATE from LOW to HIGH.