3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-10 07:15:11 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions
Configurations/config/examples/Creality/Ender-5 S1
History
Scott Lahteine 385587051f ✨ BIQU_MICROPROBE_V1/V2 
MarlinFirmware/Marlin#26527

Co-Authored-By: Keith Bennett <13375512+thisiskeithb@users.noreply.github.com>
2024-01-21 06:00:25 -06:00
..
Configuration.h ✨ BIQU_MICROPROBE_V1/V2 2024-01-21 06:00:25 -06:00
Configuration_adv.h 🩹 Fix Robo3D R1+ Config (#1003) 2024-01-21 05:57:34 -06:00
README.md ✨ Creality Ender-5 S1 2023-02-14 00:44:49 -06:00

README.md

Creality Ender-5 S1

The bootloader on the stock board has special requirements and requires a flag to be set in the EEPROM before it will install the firmware.

  • The built firmware bin file must be placed into a folder named STM32F4_UPDATE on the SD card.
  • Connect to the printer over serial and send M936 V2. (You can also run a G-code file containing M936 V2.)
  • Make sure to always flash a working version of Marlin with OTA_FIRMWARE_UPDATE enabled!
  • If for any reason you can't run M936 V2 then you'll need to run a sketch to write 0x02 to EEPROM address 90 (e.g., with BL24CXX::write).