3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-07 05:54:07 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions
Configurations/config/examples/Felix/DUAL
History
Jason Smith 344b5a83cb
Update SERIAL_DMA and FREEZE_FEATURE comments (#1043) 
* ✨🐛 HC32 - Add SERIAL_DMA, fix SDIO and MEATPACK
Co-authored-by: Chris <52449218+shadow578@users.noreply.github.com>

* 📝Improve Freeze Feature comment
Co-authored-by: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
2024-04-20 15:35:39 -07:00
..
Configuration.h 🔧 "CNC" character info screen 2024-03-31 21:15:21 -05:00
Configuration_adv.h Update SERIAL_DMA and FREEZE_FEATURE comments (#1043) 2024-04-20 15:35:39 -07:00
README.md 📝 Improve, clean up READMEs (#988) 2023-11-14 04:51:08 -06:00

README.md

Felix 2.0/3.0 Configuration for Marlin Firmware

Bringing silky smooth prints to Felix.

Build HOWTO

cd Marlin/src
cp config/examples/Felix/Configuration_adv.h .

The next step depends on your setup:

Single Extruder Configuration

cp config/examples/Felix/Configuration.h .

Dual Extruder Configuration

cp config/examples/Felix/DUAL/Configuration.h Configuration.h

Compile Firmware

  • Start the Arduino IDE.
  • Select Tools -> Board -> Arduino Mega 2560
  • Select the correct serial port in Tools -> Serial Port (usually /dev/ttyUSB0)
  • Open Marlin.pde or .ino
  • Click the Verify/Compile button

Flash Firmware

Connected directly via USB

  • Click the Upload button. If all goes well the firmware is uploading

Remote update

Find the latest Arduino build:

ls -altr /tmp/
drwxr-xr-x 5 chrono users 12288 Mar 3 21:41 build6072035599686630843.tmp

Copy the firmware to your printer host:

scp /tmp/build6072035599686630843.tmp/Marlin.cpp.hex a.b.c.d:/tmp/

Connect to your printer host via ssh, stop Octoprint or any other service that may block your USB device and make sure you have avrdude installed, then run:

avrdude -C/etc/avrdude.conf -v -v -v -patmega2560 -cwiring -P/dev/ttyUSB0 \
-b115200 -D -Uflash:w:/tmp/Marlin.cpp.hex:i

Acknowledgements

Mashed together and tested on https://apollo.open-resource.org/mission:resources:picoprint based on collaborative teamwork of @andrewsil1 and @thinkyhead.