3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-09 06:45:27 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions
Configurations/config/examples/Creality/Ender-5 Plus/CrealityV1 (RELOADED UI)
History
Jason Smith 344b5a83cb
Update SERIAL_DMA and FREEZE_FEATURE comments (#1043) 
* ✨🐛 HC32 - Add SERIAL_DMA, fix SDIO and MEATPACK
Co-authored-by: Chris <52449218+shadow578@users.noreply.github.com>

* 📝Improve Freeze Feature comment
Co-authored-by: InsanityAutomation <38436470+InsanityAutomation@users.noreply.github.com>
2024-04-20 15:35:39 -07:00
..
Configuration.h 🔧 "CNC" character info screen 2024-03-31 21:15:21 -05:00
Configuration_adv.h Update SERIAL_DMA and FREEZE_FEATURE comments (#1043) 2024-04-20 15:35:39 -07:00
README.md 📝 Improve, clean up READMEs (#988) 2023-11-14 04:51:08 -06:00

README.md

Ender-5 Plus Configurations for Marlin Firmware

Important

The Ender-5 LCD stock firmware is only compatible with Creality firmware. The LCD standard UI will not function. This is expected. With the stock LCD firmware Marlin can only be controlled from a host over USB.

Marlin DGUS UI "Reloaded" Instructions

The Ender-5 stock LCD can optionally use a customized Marlin DGUS interface. To use DGUS_LCD_UI RELOADED the stock LCD must be flashed with custom firmware.

Get the DWIN_SET

Prepare the SD Card

  • Format a Micro-SD card, selecting FAT32 for the file system and 4096 bytes sector size. These parameters are required for the procedure to work.
  • Copy the DWIN_SET folder to the root of the Micro-SD card.
  • Unmount and unplug your Micro-SD card.

Flash the touchscreen

  • Turn off and unplug your printer (both power and USB).
  • You will need to access the Micro-SD slot on the back of the touchscreen (not the one that may be on your mainboard). If necessary, open the printer to access this slot.
  • Insert the Micro-SD card into the screen SD slot.
  • Plug the printer's power cable back in (but not the USB cable) and turn on the printer.
  • After a few seconds the screen background will turn blue and the firmware flash will begin. Do not cut power to the printer while the procedure is running!
  • When the procedure ends the screen will display a blue background with an END message on the first line and a summary.
  • Turn off the printer. Remove the Micro-SD card from the touchscreen. Reassemble the printer if needed.
  • The touch-screen firmware is now up-to-date.

Restoring Factory Firmware

The original firmware can be restored by downloading the Ender 5 Plus firmware from Creality. You can follow the same LCD flashing procedure using the Creality-provided DWIN_SET folder.