3D-printing/Configurations
1
0
Fork 0
mirror of https://github.com/MarlinFirmware/Configurations.git synced 2025-08-08 06:24:04 -06:00
Code Issues Projects Releases Packages Wiki Activity Actions
Configurations/config/examples/Creality/Ender-5 S1
History
Scott Lahteine 566d9150df ✨ PELTIER_BED (2)
2024-10-13 01:50:10 -05:00
..
Configuration.h 📝 Clarify STRING_CONFIG_H_AUTHOR 2024-10-11 14:26:03 -05:00
Configuration_adv.h ✨ PELTIER_BED (2) 2024-10-13 01:50:10 -05:00
README.md ✨ Creality Ender-5 S1 2023-02-14 00:44:49 -06:00

README.md

Creality Ender-5 S1

The bootloader on the stock board has special requirements and requires a flag to be set in the EEPROM before it will install the firmware.

  • The built firmware bin file must be placed into a folder named STM32F4_UPDATE on the SD card.
  • Connect to the printer over serial and send M936 V2. (You can also run a G-code file containing M936 V2.)
  • Make sure to always flash a working version of Marlin with OTA_FIRMWARE_UPDATE enabled!
  • If for any reason you can't run M936 V2 then you'll need to run a sketch to write 0x02 to EEPROM address 90 (e.g., with BL24CXX::write).