Configurations/config/examples/Creality/CR-10 Max
2024-06-24 14:45:42 -05:00
..
Configuration.h ♻️ DISABLE_ENCODER => NO_BACK_MENU_ITEM 2024-06-16 16:08:20 -05:00
Configuration_adv.h 🔥 Drop CALIBRATION_MEASUREMENT_RESOLUTION 2024-06-24 14:45:42 -05:00
README.md CR-10 Max (alpha) (#965) 2023-10-05 17:59:09 -05:00

CR-10 MAX Configurations for Marlin Firmware

Marlin DGUS UI "Reloaded" Instructions

To use DGUS_LCD_UI RELOADED the stock LCD must be flashed with custom firmware.

Get the DWIN_SET

Prepare the SD Card

  • Format a Micro-SD card, selecting FAT32 for the file system and 4096 bytes sector size. These parameters are required for the procedure to work.
  • Copy the DWIN_SET folder to the root of the Micro-SD card.
  • Unmount and unplug your Micro-SD card.

Flash the touchscreen

  • Turn off and unplug your printer (both power and USB).
  • You will need to access the Micro-SD slot on the back of the touchscreen (not the one that may be on your mainboard). If necessary, open the printer to access this slot.
  • Insert the Micro-SD card into the screen SD slot.
  • Plug the printer's power cable back in (but not the USB cable) and turn on the printer.
  • After a few seconds the screen background will turn blue and the firmware flash will begin. Do not cut power to the printer while the procedure is running!
  • When the procedure ends the screen will display a blue background with an END message on the first line and a summary.
  • Turn off the printer. Remove the Micro-SD card from the touchscreen. Reassemble the printer if needed.
  • The touch-screen firmware is now up-to-date.