mirror of
https://github.com/MarlinFirmware/Configurations.git
synced 2026-01-28 11:50:42 -07:00
Examples Customizations
This commit is contained in:
Scott Lahteine
parent
d288c45de7
commit
ff5bf5f3ae
631 changed files with 32183 additions and 27787 deletions
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "Modix/Big60"
|
||||
|
||||
/**
|
||||
* Configuration.h
|
||||
*
|
||||
|
|
@ -61,7 +63,7 @@
|
|||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "3DXtech" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
|
|
@ -79,16 +81,16 @@
|
|||
#define SHOW_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||
#define SHOW_CUSTOM_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
|
||||
// @section machine
|
||||
|
||||
// Choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_MKS_GEN_L
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
|
@ -138,7 +140,7 @@
|
|||
//#define BLUETOOTH
|
||||
|
||||
// Name displayed in the LCD "Ready" message and Info menu
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "ModixBig60"
|
||||
|
||||
// Printer's unique ID, used by some programs to differentiate between machines.
|
||||
// Choose your own or use a service like https://www.uuidgenerator.net/version4
|
||||
|
|
@ -551,7 +553,7 @@
|
|||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_0 5
|
||||
#define TEMP_SENSOR_1 0
|
||||
#define TEMP_SENSOR_2 0
|
||||
#define TEMP_SENSOR_3 0
|
||||
|
|
@ -559,7 +561,7 @@
|
|||
#define TEMP_SENSOR_5 0
|
||||
#define TEMP_SENSOR_6 0
|
||||
#define TEMP_SENSOR_7 0
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_PROBE 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define TEMP_SENSOR_COOLER 0
|
||||
|
|
@ -634,7 +636,7 @@
|
|||
// Above this temperature the heater will be switched off.
|
||||
// This can protect components from overheating, but NOT from shorts and failures.
|
||||
// (Use MINTEMP for thermistor short/failure protection.)
|
||||
#define HEATER_0_MAXTEMP 275
|
||||
#define HEATER_0_MAXTEMP 315
|
||||
#define HEATER_1_MAXTEMP 275
|
||||
#define HEATER_2_MAXTEMP 275
|
||||
#define HEATER_3_MAXTEMP 275
|
||||
|
|
@ -684,11 +686,11 @@
|
|||
// If there are fewer values, the last one applies to the remaining hotends.
|
||||
#define DEFAULT_Kp_LIST { 22.20, 22.20 }
|
||||
#define DEFAULT_Ki_LIST { 1.08, 1.08 }
|
||||
#define DEFAULT_Kd_LIST { 114.00, 114.00 }
|
||||
#define DEFAULT_Kd_LIST { 59.50, 59.50 }
|
||||
#else
|
||||
#define DEFAULT_Kp 22.20
|
||||
#define DEFAULT_Ki 1.08
|
||||
#define DEFAULT_Kd 114.00
|
||||
#define DEFAULT_Kd 59.50
|
||||
#endif
|
||||
#else
|
||||
#define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current
|
||||
|
|
@ -837,8 +839,8 @@
|
|||
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
|
||||
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
|
||||
|
||||
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
|
||||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
|
||||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
|
||||
#endif
|
||||
|
||||
// @section safety
|
||||
|
|
@ -1061,7 +1063,7 @@
|
|||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
// extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
|
||||
#define USE_XMIN_PLUG
|
||||
#define USE_YMIN_PLUG
|
||||
//#define USE_YMIN_PLUG
|
||||
#define USE_ZMIN_PLUG
|
||||
//#define USE_IMIN_PLUG
|
||||
//#define USE_JMIN_PLUG
|
||||
|
|
@ -1070,7 +1072,7 @@
|
|||
//#define USE_VMIN_PLUG
|
||||
//#define USE_WMIN_PLUG
|
||||
//#define USE_XMAX_PLUG
|
||||
//#define USE_YMAX_PLUG
|
||||
#define USE_YMAX_PLUG
|
||||
//#define USE_ZMAX_PLUG
|
||||
//#define USE_IMAX_PLUG
|
||||
//#define USE_JMAX_PLUG
|
||||
|
|
@ -1130,9 +1132,9 @@
|
|||
#endif
|
||||
|
||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||
#define X_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define I_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define K_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
|
|
@ -1140,7 +1142,7 @@
|
|||
#define V_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define W_MIN_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING true // Set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define I_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define J_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
|
|
@ -1148,7 +1150,7 @@
|
|||
#define U_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define V_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define W_MAX_ENDSTOP_INVERTING false // Set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // Set to true to invert the logic of the probe.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING true // Set to true to invert the logic of the probe.
|
||||
|
||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||
// This will remove the need to poll the interrupt pins, saving many CPU cycles.
|
||||
|
|
@ -1196,14 +1198,14 @@
|
|||
* Override with M92
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 200, 100, 2000, 418.50 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (linear=mm/s, rotational=°/s)
|
||||
* Override with M203
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 200, 200, 5, 70 }
|
||||
|
||||
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
|
||||
#if ENABLED(LIMITED_MAX_FR_EDITING)
|
||||
|
|
@ -1216,7 +1218,7 @@
|
|||
* Override with M201
|
||||
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 10000 }
|
||||
|
||||
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
|
||||
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
|
||||
|
|
@ -1231,9 +1233,9 @@
|
|||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
/**
|
||||
* Default Jerk limits (mm/s)
|
||||
|
|
@ -1273,7 +1275,7 @@
|
|||
* https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
|
||||
*/
|
||||
#if DISABLED(CLASSIC_JERK)
|
||||
#define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
|
||||
#define JUNCTION_DEVIATION_MM 0.06 // (mm) Distance from real junction edge
|
||||
#define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
|
||||
// for small segments (< 1mm) with large junction angles (> 135°).
|
||||
#endif
|
||||
|
|
@ -1286,7 +1288,7 @@
|
|||
*
|
||||
* See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
|
||||
*/
|
||||
//#define S_CURVE_ACCELERATION
|
||||
#define S_CURVE_ACCELERATION
|
||||
|
||||
//===========================================================================
|
||||
//============================= Z Probe Options =============================
|
||||
|
|
@ -1340,7 +1342,7 @@
|
|||
* A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
|
||||
* (e.g., an inductive probe or a nozzle-based probe-switch.)
|
||||
*/
|
||||
//#define FIX_MOUNTED_PROBE
|
||||
#define FIX_MOUNTED_PROBE
|
||||
|
||||
/**
|
||||
* Use the nozzle as the probe, as with a conductive
|
||||
|
|
@ -1511,17 +1513,17 @@
|
|||
* | [-] |
|
||||
* O-- FRONT --+
|
||||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
#define NOZZLE_TO_PROBE_OFFSET { -34, 26, 0 }
|
||||
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define PROBING_MARGIN 10
|
||||
|
||||
// X and Y axis travel speed (mm/min) between probes
|
||||
#define XY_PROBE_FEEDRATE (133*60)
|
||||
#define XY_PROBE_FEEDRATE (83*60)
|
||||
|
||||
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||
#define Z_PROBE_FEEDRATE_FAST (4*60)
|
||||
#define Z_PROBE_FEEDRATE_FAST (6*60)
|
||||
|
||||
// Feedrate (mm/min) for the "accurate" probe of each point
|
||||
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
|
||||
|
|
@ -1571,7 +1573,7 @@
|
|||
* A total of 2 does fast/slow probes with a weighted average.
|
||||
* A total of 3 or more adds more slow probes, taking the average.
|
||||
*/
|
||||
//#define MULTIPLE_PROBING 2
|
||||
#define MULTIPLE_PROBING 2
|
||||
//#define EXTRA_PROBING 1
|
||||
|
||||
/**
|
||||
|
|
@ -1593,14 +1595,14 @@
|
|||
#define Z_CLEARANCE_MULTI_PROBE 5 // (mm) Z Clearance between multiple probes
|
||||
//#define Z_AFTER_PROBING 5 // (mm) Z position after probing is done
|
||||
|
||||
#define Z_PROBE_LOW_POINT -2 // (mm) Farthest distance below the trigger-point to go before stopping
|
||||
#define Z_PROBE_LOW_POINT -3 // (mm) Farthest distance below the trigger-point to go before stopping
|
||||
|
||||
// For M851 give a range for adjusting the Z probe offset
|
||||
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||
|
||||
// Enable the M48 repeatability test to test probe accuracy
|
||||
//#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||
#define Z_MIN_PROBE_REPEATABILITY_TEST
|
||||
|
||||
// Before deploy/stow pause for user confirmation
|
||||
//#define PAUSE_BEFORE_DEPLOY_STOW
|
||||
|
|
@ -1670,9 +1672,9 @@
|
|||
// @section motion
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#define INVERT_X_DIR false
|
||||
#define INVERT_X_DIR true
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Z_DIR false
|
||||
#define INVERT_Z_DIR true
|
||||
//#define INVERT_I_DIR false
|
||||
//#define INVERT_J_DIR false
|
||||
//#define INVERT_K_DIR false
|
||||
|
|
@ -1712,7 +1714,7 @@
|
|||
// Direction of endstops when homing; 1=MAX, -1=MIN
|
||||
// :[-1,1]
|
||||
#define X_HOME_DIR -1
|
||||
#define Y_HOME_DIR -1
|
||||
#define Y_HOME_DIR 1
|
||||
#define Z_HOME_DIR -1
|
||||
//#define I_HOME_DIR -1
|
||||
//#define J_HOME_DIR -1
|
||||
|
|
@ -1724,8 +1726,8 @@
|
|||
// @section geometry
|
||||
|
||||
// The size of the printable area
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE 600
|
||||
#define Y_BED_SIZE 600
|
||||
|
||||
// Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
|
|
@ -1733,7 +1735,7 @@
|
|||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 200
|
||||
#define Z_MAX_POS 600
|
||||
//#define I_MIN_POS 0
|
||||
//#define I_MAX_POS 50
|
||||
//#define J_MIN_POS 0
|
||||
|
|
@ -1803,12 +1805,12 @@
|
|||
* RAMPS-based boards use SERVO3_PIN for the first runout sensor.
|
||||
* For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
|
||||
*/
|
||||
//#define FILAMENT_RUNOUT_SENSOR
|
||||
#define FILAMENT_RUNOUT_SENSOR
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
|
||||
#define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present.
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
|
||||
//#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder.
|
||||
|
|
@ -1855,7 +1857,7 @@
|
|||
// After a runout is detected, continue printing this length of filament
|
||||
// before executing the runout script. Useful for a sensor at the end of
|
||||
// a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
|
||||
//#define FILAMENT_RUNOUT_DISTANCE_MM 25
|
||||
#define FILAMENT_RUNOUT_DISTANCE_MM 100
|
||||
|
||||
#ifdef FILAMENT_RUNOUT_DISTANCE_MM
|
||||
// Enable this option to use an encoder disc that toggles the runout pin
|
||||
|
|
@ -1906,7 +1908,7 @@
|
|||
//#define AUTO_BED_LEVELING_3POINT
|
||||
//#define AUTO_BED_LEVELING_LINEAR
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
//#define AUTO_BED_LEVELING_UBL
|
||||
#define AUTO_BED_LEVELING_UBL
|
||||
//#define MESH_BED_LEVELING
|
||||
|
||||
/**
|
||||
|
|
@ -1920,7 +1922,7 @@
|
|||
* these options to restore the prior leveling state or to always enable
|
||||
* leveling immediately after G28.
|
||||
*/
|
||||
//#define RESTORE_LEVELING_AFTER_G28
|
||||
#define RESTORE_LEVELING_AFTER_G28
|
||||
//#define ENABLE_LEVELING_AFTER_G28
|
||||
|
||||
/**
|
||||
|
|
@ -1975,7 +1977,7 @@
|
|||
/**
|
||||
* Enable the G26 Mesh Validation Pattern tool.
|
||||
*/
|
||||
//#define G26_MESH_VALIDATION
|
||||
#define G26_MESH_VALIDATION
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
||||
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for G26.
|
||||
|
|
@ -2024,7 +2026,7 @@
|
|||
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||
|
||||
#define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
|
||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_X 15 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
//#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points
|
||||
|
|
@ -2032,7 +2034,7 @@
|
|||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
//#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
|
||||
#define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used
|
||||
// as the Z-Height correction value.
|
||||
|
||||
//#define UBL_MESH_WIZARD // Run several commands in a row to get a complete mesh
|
||||
|
|
@ -2055,22 +2057,22 @@
|
|||
* Add a bed leveling sub-menu for ABL or MBL.
|
||||
* Include a guided procedure if manual probing is enabled.
|
||||
*/
|
||||
//#define LCD_BED_LEVELING
|
||||
#define LCD_BED_LEVELING
|
||||
|
||||
#if ENABLED(LCD_BED_LEVELING)
|
||||
#define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
|
||||
#define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
//#define MESH_EDIT_MENU // Add a menu to edit mesh points
|
||||
#define MESH_EDIT_MENU // Add a menu to edit mesh points
|
||||
#endif
|
||||
|
||||
// Add a menu item to move between bed corners for manual bed adjustment
|
||||
//#define LCD_BED_TRAMMING
|
||||
#define LCD_BED_TRAMMING
|
||||
|
||||
#if ENABLED(LCD_BED_TRAMMING)
|
||||
#define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
|
||||
#define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points
|
||||
#define BED_TRAMMING_Z_HOP 4.0 // (mm) Z raise between tramming points
|
||||
//#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner
|
||||
#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner
|
||||
//#define BED_TRAMMING_USE_PROBE
|
||||
#if ENABLED(BED_TRAMMING_USE_PROBE)
|
||||
#define BED_TRAMMING_PROBE_TOLERANCE 0.1 // (mm)
|
||||
|
|
@ -2122,7 +2124,7 @@
|
|||
* - Allows Z homing only when XY positions are known and trusted.
|
||||
* - If stepper drivers sleep, XY homing may be required again before Z homing.
|
||||
*/
|
||||
//#define Z_SAFE_HOMING
|
||||
#define Z_SAFE_HOMING
|
||||
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
#define Z_SAFE_HOMING_X_POINT X_CENTER // (mm) X point for Z homing
|
||||
|
|
@ -2130,7 +2132,7 @@
|
|||
#endif
|
||||
|
||||
// Homing speeds (linear=mm/min, rotational=°/min)
|
||||
#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
|
||||
#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (6*60) }
|
||||
|
||||
// Validate that endstops are triggered on homing moves
|
||||
#define VALIDATE_HOMING_ENDSTOPS
|
||||
|
|
@ -2208,12 +2210,12 @@
|
|||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
|
||||
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||
#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||
//#define EEPROM_INIT_NOW // Init EEPROM on first boot after a new build.
|
||||
#endif
|
||||
|
||||
|
|
@ -2271,11 +2273,11 @@
|
|||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 50), (Y_MIN_POS + 50), 10 }
|
||||
#define NOZZLE_PARK_MOVE 0 // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
|
||||
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
|
|
@ -2494,7 +2496,7 @@
|
|||
* SD Card support is disabled by default. If your controller has an SD slot,
|
||||
* you must uncomment the following option or it won't work.
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: ENABLE CRC
|
||||
|
|
@ -2574,7 +2576,7 @@
|
|||
//
|
||||
// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
|
||||
//
|
||||
//#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
#define INDIVIDUAL_AXIS_HOMING_MENU
|
||||
//#define INDIVIDUAL_AXIS_HOMING_SUBMENU
|
||||
|
||||
//
|
||||
|
|
@ -2583,7 +2585,7 @@
|
|||
// If you have a speaker that can produce tones, enable it here.
|
||||
// By default Marlin assumes you have a buzzer with a fixed frequency.
|
||||
//
|
||||
//#define SPEAKER
|
||||
#define SPEAKER
|
||||
|
||||
//
|
||||
// The duration and frequency for the UI feedback sound.
|
||||
|
|
@ -2765,7 +2767,7 @@
|
|||
// RepRapDiscount FULL GRAPHIC Smart Controller
|
||||
// https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
||||
//
|
||||
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// K.3D Full Graphic Smart Controller
|
||||
|
|
@ -3261,7 +3263,7 @@
|
|||
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
|
||||
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
|
||||
// is too low, you should also increment SOFT_PWM_SCALE.
|
||||
//#define FAN_SOFT_PWM
|
||||
#define FAN_SOFT_PWM
|
||||
|
||||
// Incrementing this by 1 will double the software PWM frequency,
|
||||
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
|
||||
|
|
|
|||
|
|
@ -21,6 +21,8 @@
|
|||
*/
|
||||
#pragma once
|
||||
|
||||
#define CONFIG_EXAMPLES_DIR "Modix/Big60"
|
||||
|
||||
/**
|
||||
* Configuration_adv.h
|
||||
*
|
||||
|
|
@ -297,11 +299,11 @@
|
|||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
#define THERMAL_PROTECTION_PERIOD 40 // (seconds)
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // (°C)
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 10 // (°C)
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
|
@ -885,7 +887,7 @@
|
|||
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (linear=mm, rotational=°) Backoff from endstops after homing
|
||||
//#define XY_COUNTERPART_BACKOFF_MM 0 // (mm) Backoff X after homing Y, and vice-versa
|
||||
|
||||
//#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X
|
||||
//#define HOME_Z_FIRST // Home Z first. Requires a real endstop (not a probe).
|
||||
//#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first
|
||||
|
|
@ -1018,7 +1020,7 @@
|
|||
|
||||
// On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
|
||||
#define G34_MAX_GRADE 5 // (%) Maximum incline that G34 will handle
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 5 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 3 // Number of iterations to apply during alignment
|
||||
#define Z_STEPPER_ALIGN_ACC 0.02 // Stop iterating early if the accuracy is better than this
|
||||
#define RESTORE_LEVELING_AFTER_G34 // Restore leveling after G34 is done?
|
||||
// After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
|
||||
|
|
@ -1435,7 +1437,7 @@
|
|||
|
||||
#if EITHER(HAS_DISPLAY, DWIN_LCD_PROUI)
|
||||
// The timeout to return to the status screen from sub-menus
|
||||
#define LCD_TIMEOUT_TO_STATUS 60000 // (ms)
|
||||
#define LCD_TIMEOUT_TO_STATUS 15000 // (ms)
|
||||
|
||||
#if ENABLED(SHOW_BOOTSCREEN)
|
||||
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Total Duration to display the boot screen(s)
|
||||
|
|
@ -1445,7 +1447,7 @@
|
|||
#endif
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
// Apply a timeout to low-priority status messages
|
||||
//#define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
|
||||
|
|
@ -1485,10 +1487,10 @@
|
|||
#endif // HAS_DISPLAY || DWIN_LCD_PROUI
|
||||
|
||||
// Add 'M73' to set print job progress, overrides Marlin's built-in estimate
|
||||
//#define SET_PROGRESS_MANUALLY
|
||||
#define SET_PROGRESS_MANUALLY
|
||||
#if ENABLED(SET_PROGRESS_MANUALLY)
|
||||
#define SET_PROGRESS_PERCENT // Add 'P' parameter to set percentage done
|
||||
#define SET_REMAINING_TIME // Add 'R' parameter to set remaining time
|
||||
//#define SET_REMAINING_TIME // Add 'R' parameter to set remaining time
|
||||
//#define SET_INTERACTION_TIME // Add 'C' parameter to set time until next filament change or other user interaction
|
||||
//#define M73_REPORT // Report M73 values to host
|
||||
#if BOTH(M73_REPORT, SDSUPPORT)
|
||||
|
|
@ -1636,11 +1638,11 @@
|
|||
// LCD's font must contain the characters. Check your selected LCD language.
|
||||
//#define UTF_FILENAME_SUPPORT
|
||||
|
||||
//#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
|
||||
#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
|
||||
//#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
|
||||
//#define M20_TIMESTAMP_SUPPORT // Include timestamps by adding the 'T' flag to M20 commands
|
||||
|
||||
//#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu
|
||||
#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu
|
||||
|
||||
//#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!)
|
||||
|
||||
|
|
@ -1656,7 +1658,7 @@
|
|||
|
||||
//#define SD_REPRINT_LAST_SELECTED_FILE // On print completion open the LCD Menu and select the same file
|
||||
|
||||
//#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S<seconds>'
|
||||
#define AUTO_REPORT_SD_STATUS // Auto-report media status with 'M27 S<seconds>'
|
||||
|
||||
/**
|
||||
* Support for USB thumb drives using an Arduino USB Host Shield or
|
||||
|
|
@ -2064,18 +2066,18 @@
|
|||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
//#define BABYSTEPPING
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement)
|
||||
#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement)
|
||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||
//#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
|
||||
#define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
|
||||
#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
|
||||
|
||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
|
||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||
// Note: Extra time may be added to mitigate controller latency.
|
||||
|
|
@ -2087,10 +2089,10 @@
|
|||
|
||||
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
|
||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
#endif
|
||||
#endif
|
||||
|
||||
|
|
@ -2111,12 +2113,12 @@
|
|||
*
|
||||
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
|
||||
*/
|
||||
//#define LIN_ADVANCE
|
||||
#define LIN_ADVANCE
|
||||
#if ENABLED(LIN_ADVANCE)
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
|
||||
#define ADVANCE_K { 0.0 } // (mm) Compression length per 1mm/s extruder speed, per extruder
|
||||
#else
|
||||
#define ADVANCE_K 0.22 // (mm) Compression length applying to all extruders
|
||||
#define ADVANCE_K 0.0 // (mm) Compression length applying to all extruders
|
||||
#endif
|
||||
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
|
||||
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
|
||||
|
|
@ -2300,7 +2302,7 @@
|
|||
#endif
|
||||
|
||||
// G5 Bézier Curve Support with XYZE destination and IJPQ offsets
|
||||
//#define BEZIER_CURVE_SUPPORT // Requires ~2666 bytes
|
||||
#define BEZIER_CURVE_SUPPORT // Requires ~2666 bytes
|
||||
|
||||
#if EITHER(ARC_SUPPORT, BEZIER_CURVE_SUPPORT)
|
||||
//#define CNC_WORKSPACE_PLANES // Allow G2/G3/G5 to operate in XY, ZX, or YZ planes
|
||||
|
|
@ -2449,7 +2451,7 @@
|
|||
* Currently handles M108, M112, M410, M876
|
||||
* NOTE: Not yet implemented for all platforms.
|
||||
*/
|
||||
//#define EMERGENCY_PARSER
|
||||
#define EMERGENCY_PARSER
|
||||
|
||||
/**
|
||||
* Realtime Reporting (requires EMERGENCY_PARSER)
|
||||
|
|
@ -2477,10 +2479,10 @@
|
|||
* Some other clients start sending commands while receiving a 'wait'.
|
||||
* This "wait" is only sent when the buffer is empty. 1 second is a good value here.
|
||||
*/
|
||||
//#define NO_TIMEOUTS 1000 // (ms)
|
||||
#define NO_TIMEOUTS 1000 // (ms)
|
||||
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
|
|
@ -2525,7 +2527,7 @@
|
|||
*
|
||||
* Note that M207 / M208 / M209 settings are saved to EEPROM.
|
||||
*/
|
||||
//#define FWRETRACT
|
||||
#define FWRETRACT
|
||||
#if ENABLED(FWRETRACT)
|
||||
#define FWRETRACT_AUTORETRACT // Override slicer retractions
|
||||
#if ENABLED(FWRETRACT_AUTORETRACT)
|
||||
|
|
@ -2648,14 +2650,14 @@
|
|||
*
|
||||
* Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 3 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 50 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
|
|
@ -2664,7 +2666,7 @@
|
|||
// 0 to disable start loading and skip to fast load only
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 25 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
|
||||
|
|
@ -2674,7 +2676,7 @@
|
|||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
#define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park.
|
||||
//#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
|
||||
#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length.
|
||||
|
|
@ -2682,17 +2684,17 @@
|
|||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
#define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 120 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
//#define FILAMENT_CHANGE_RESUME_ON_INSERT // Automatically continue / load filament when runout sensor is triggered again.
|
||||
//#define PAUSE_REHEAT_FAST_RESUME // Reduce number of waits by not prompting again post-timeout before continuing.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc_smart
|
||||
|
|
@ -3860,10 +3862,10 @@
|
|||
* Host Prompt Support enables Marlin to use the host for user prompts so
|
||||
* filament runout and other processes can be managed from the host side.
|
||||
*/
|
||||
//#define HOST_ACTION_COMMANDS
|
||||
#define HOST_ACTION_COMMANDS
|
||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||
//#define HOST_PAUSE_M76 // Tell the host to pause in response to M76
|
||||
//#define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback
|
||||
#define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback
|
||||
#if ENABLED(HOST_PROMPT_SUPPORT)
|
||||
//#define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications
|
||||
#endif
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue