From fea91e9a3fb0911f09ad3fc729ee1484b61ab036 Mon Sep 17 00:00:00 2001 From: Stephen Hawes Date: Fri, 4 Feb 2022 20:32:41 -0500 Subject: [PATCH] =?UTF-8?q?=F0=9F=94=A7=20Update=20Index=20REV03=20config?= =?UTF-8?q?=20(#672)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- config/examples/Index/REV_03/Configuration.h | 28 +++++++++---------- .../examples/Index/REV_03/Configuration_adv.h | 14 +++++----- 2 files changed, 21 insertions(+), 21 deletions(-) diff --git a/config/examples/Index/REV_03/Configuration.h b/config/examples/Index/REV_03/Configuration.h index 72148159e6..cb74dbde75 100644 --- a/config/examples/Index/REV_03/Configuration.h +++ b/config/examples/Index/REV_03/Configuration.h @@ -941,14 +941,14 @@ * Override with M92 * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 80, 500, 500, 80 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 40, 40, 40, 4.44, 4.44, 40 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 300, 25, 25, 300 } +#define DEFAULT_MAX_FEEDRATE { 500, 500, 250, 50000, 50000, 5000 } //#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2 #if ENABLED(LIMITED_MAX_FR_EDITING) @@ -961,7 +961,7 @@ * Override with M201 * X, Y, Z [, I [, J [, K]]], E0 [, E1[, E2...]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 2000, 3000, 3000, 3000 } +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 2000, 3000, 3000, 3000 } //#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2 #if ENABLED(LIMITED_MAX_ACCEL_EDITING) @@ -976,7 +976,7 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves #define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts #define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves @@ -1355,11 +1355,11 @@ // @section machine // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false -#define INVERT_Y_DIR false +#define INVERT_X_DIR true +#define INVERT_Y_DIR true #define INVERT_Z_DIR false -#define INVERT_I_DIR false -#define INVERT_J_DIR false +#define INVERT_I_DIR true +#define INVERT_J_DIR true #define INVERT_K_DIR false // @section extruder @@ -1386,10 +1386,10 @@ */ //#define Z_IDLE_HEIGHT Z_HOME_POS -#define Z_HOMING_HEIGHT 29.5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 31.5 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure to have this much clearance over your Z_MAX_POS to prevent grinding. -//#define Z_AFTER_HOMING 10 // (mm) Height to move to after homing Z +#define Z_AFTER_HOMING 31.5 // (mm) Height to move to after homing Z // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] @@ -1404,7 +1404,7 @@ // The size of the printable area #define X_BED_SIZE 435 -#define Y_BED_SIZE 490 +#define Y_BED_SIZE 485 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -2952,14 +2952,14 @@ //#define NEOPIXEL2_PIN 5 #define NEOPIXEL_PIXELS 8 // Number of LEDs in the strip. (Longest strip when NEOPIXEL2_SEPARATE is disabled.) #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup + #define NEOPIXEL_BRIGHTNESS 255 // Initial brightness (0-255) + #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup // Support for second Adafruit NeoPixel LED driver controlled with M150 S1 ... #define NEOPIXEL2_SEPARATE #if ENABLED(NEOPIXEL2_SEPARATE) #define NEOPIXEL2_PIXELS 8 // Number of LEDs in the second strip - #define NEOPIXEL2_BRIGHTNESS 127 // Initial brightness (0-255) + #define NEOPIXEL2_BRIGHTNESS 255 // Initial brightness (0-255) #define NEOPIXEL2_STARTUP_TEST // Cycle through colors at startup #else //#define NEOPIXEL2_INSERIES // Default behavior is NeoPixel 2 in parallel diff --git a/config/examples/Index/REV_03/Configuration_adv.h b/config/examples/Index/REV_03/Configuration_adv.h index 83b6c081bd..d0951e9497 100644 --- a/config/examples/Index/REV_03/Configuration_adv.h +++ b/config/examples/Index/REV_03/Configuration_adv.h @@ -852,7 +852,7 @@ #define QUICK_HOME // If G28 contains XY do a diagonal move first //#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X -#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). +//#define HOME_Z_FIRST // Home Z first. Requires a Z-MIN endstop (not a probe). //#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first // @section bltouch @@ -2684,7 +2684,7 @@ #if AXIS_IS_TMC(X) #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current. #define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing - #define X_MICROSTEPS 16 // 0..256 + #define X_MICROSTEPS 8 // 0..256 #define X_RSENSE 0.11 #define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ... //#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis @@ -2704,7 +2704,7 @@ #if AXIS_IS_TMC(Y) #define Y_CURRENT 800 #define Y_CURRENT_HOME Y_CURRENT - #define Y_MICROSTEPS 16 + #define Y_MICROSTEPS 8 #define Y_RSENSE 0.11 #define Y_CHAIN_POS -1 //#define Y_INTERPOLATE true @@ -2724,7 +2724,7 @@ #if AXIS_IS_TMC(Z) #define Z_CURRENT 800 #define Z_CURRENT_HOME Z_CURRENT - #define Z_MICROSTEPS 16 + #define Z_MICROSTEPS 8 #define Z_RSENSE 0.11 #define Z_CHAIN_POS -1 //#define Z_INTERPOLATE true @@ -2762,9 +2762,9 @@ #endif #if AXIS_IS_TMC(I) - #define I_CURRENT 800 + #define I_CURRENT 700 #define I_CURRENT_HOME I_CURRENT - #define I_MICROSTEPS 16 + #define I_MICROSTEPS 8 #define I_RSENSE 0.11 #define I_CHAIN_POS -1 //#define I_INTERPOLATE true @@ -3099,7 +3099,7 @@ * Enable M122 debugging command for TMC stepper drivers. * M122 S0/1 will enable continuous reporting. */ - //#define TMC_DEBUG + #define TMC_DEBUG /** * You can set your own advanced settings by filling in predefined functions.