diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index 551484bcfb..6b1febc8f5 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index 75452849a7..a61c04d281 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index 2db9e8ea82..d64a1fbf66 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 830aeb578e..447e4a30ca 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/config/examples/AlephObjects/TAZ4/Configuration_adv.h index 4c618cea1c..be1c67395a 100644 --- a/config/examples/AlephObjects/TAZ4/Configuration_adv.h +++ b/config/examples/AlephObjects/TAZ4/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index e65d3be162..83261d86d3 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 271b8e62d6..e19ddf4fd5 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 57c8bd6852..e4354c11b0 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index a3afdd1803..aba68bd78a 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index a3afdd1803..aba68bd78a 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 24d0f9e010..3b274dd999 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 129d25ff7f..64ce21b702 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index f6261cb37a..a998457ba2 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 4384d4b282..03b0884b22 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 69013dbe4c..3401ad87df 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 6d88b008f9..9e8129436a 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index e1f442978c..c0855b6def 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index e72a626985..787ae48096 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index dbbb6007f1..67f9ca2a03 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -800,10 +800,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 95a96bb998..ec38af85ba 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 7aac33e8c6..288c0507ec 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index 5309ca88ef..bf84198403 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -801,10 +801,10 @@ #define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. + // Define positions for probe points. #define TRAMMING_POINT_XY { { 20, 45 }, { 280, 45 }, { 280, 255 }, { 20, 255 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index 5309ca88ef..bf84198403 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -801,10 +801,10 @@ #define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. + // Define positions for probe points. #define TRAMMING_POINT_XY { { 20, 45 }, { 280, 45 }, { 280, 255 }, { 20, 255 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index 5309ca88ef..bf84198403 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -801,10 +801,10 @@ #define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. + // Define positions for probe points. #define TRAMMING_POINT_XY { { 20, 45 }, { 280, 45 }, { 280, 255 }, { 20, 255 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 61752c7d60..27183bd8f9 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 84d8477748..e76f765d07 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 44021e78c4..60369034c9 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 038d7e3ba1..79cfc65e6e 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index fb1f9bfc4f..efd5175d8f 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index 082702ff25..faa530a4dd 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -805,10 +805,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Artillery/Genius/Configuration_adv.h b/config/examples/Artillery/Genius/Configuration_adv.h index fcdc64a5aa..7648654a2d 100644 --- a/config/examples/Artillery/Genius/Configuration_adv.h +++ b/config/examples/Artillery/Genius/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h index fcdc64a5aa..7648654a2d 100644 --- a/config/examples/Artillery/Sidewinder X1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h index 25f517f526..225735902b 100644 --- a/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index 6a515b3b96..b28c8b683c 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index ec7841b963..db3345852f 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h index 779a3a170c..67b01a3063 100644 --- a/config/examples/BIQU/B1-BLTouch/Configuration_adv.h +++ b/config/examples/BIQU/B1-BLTouch/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/BIQU/B1/Configuration_adv.h b/config/examples/BIQU/B1/Configuration_adv.h index 70d0fcba2e..351e0bcc82 100644 --- a/config/examples/BIQU/B1/Configuration_adv.h +++ b/config/examples/BIQU/B1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 57ceeceb84..8119dc6b06 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index eda430d043..93bd9e8c3c 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 57ceeceb84..8119dc6b06 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index 555017c7ab..b8c5952e70 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index 34d8115059..3af5a9b8bd 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index f3ae9f41ff..5a51846488 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index 93f1310aee..de147f24f4 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index 93f1310aee..de147f24f4 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 5d5862871d..b0ce645022 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 11ece41310..f218788165 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. + // Define positions for probe points. #define TRAMMING_POINT_XY { { 20, 20 }, { 300, 20 }, { 300, 300 }, { 20, 300 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index deaeb08c35..b91f932767 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 64d9e339d5..a141e6fdef 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. + // Define positions for probe points. #define TRAMMING_POINT_XY { { 20, 20 }, { 300, 20 }, { 300, 300 }, { 20, 300 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 6f21dac27f..2bcd2c78ca 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 17d4910f36..a8d270946d 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index 97c75c80d5..361551799e 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-6 SE/Configuration_adv.h b/config/examples/Creality/CR-6 SE/Configuration_adv.h index 316c8390c1..e70022cd02 100644 --- a/config/examples/Creality/CR-6 SE/Configuration_adv.h +++ b/config/examples/Creality/CR-6 SE/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index ebf0710664..20f4e07ed7 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 008a87bb79..bafcad0e34 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 655339f5a4..a1d0f4c369 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 198aca2589..8e7ca5d1b1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a78b252666..0ae55908b3 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index 8480d6c06b..4302b2034b 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index 53f64e61b7..e3846d059f 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index a310795b50..2157c9956e 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3 V2/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/Configuration_adv.h index 07c1cac487..62c76b13eb 100644 --- a/config/examples/Creality/Ender-3 V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 0d0089f8d2..11859f13c9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 613b76a9ff..145ea8d879 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 0d0089f8d2..11859f13c9 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 351cc33c4f..e89b396473 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 00724911fd..34f02a4ee8 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 6ea2523a1c..1058c9fd4d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index ef90486cd2..29c71d085c 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 78d0d48527..31c4b61932 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 78d0d48527..31c4b61932 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index b051f3f578..14ff28f85a 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 052fbcd1b6..526aa03ba5 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 052fbcd1b6..526aa03ba5 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 052fbcd1b6..526aa03ba5 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 052fbcd1b6..526aa03ba5 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index 609f62962e..bb99a42990 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h index 936c1baab7..1a73a9b45a 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3 1.0/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 3f83936d26..3f1215c6a7 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index a9803c1740..14ef0fdd93 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 12db155b54..71f5ad82e0 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 5038cabf0b..54b21f4380 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 6440c69d02..aa6b9b41f5 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 42f6af4d33..6e6ff91093 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index 0dd444059b..f2e55da62c 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 268ece2f54..2eb788c5a4 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 0dd444059b..f2e55da62c 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index 9c2a7c7683..11b740a012 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -805,10 +805,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index 5038cabf0b..54b21f4380 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 6440c69d02..aa6b9b41f5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 39b08629a6..1434fc602b 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 63d2c04566..dab96a6da4 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 9665e0a55b..fc25ad8a4a 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 9665e0a55b..fc25ad8a4a 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index 05698d6a59..1f12e28ed6 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 006dcb1d08..a0cc0dc8c4 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index 4dae8568b7..d52811e2c7 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index e58316b9b0..35356f6bc6 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index abd597877b..f85935de86 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index d883fd2558..7b618a4c85 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 6d3d2b9967..b881b576c7 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 9b4d775fa5..7137e1c0ac 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 9b4d775fa5..7137e1c0ac 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index 02d80c5972..2b58be9ad9 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 025a29c834..33c8ddd0cc 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index ce10967279..3064d72bde 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index 7842e2841c..32a784c4f1 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 1c8c96509a..c867ac4b79 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 1c8c48a3d0..7072bb4515 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index a77f20cbf8..e17b27738d 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -805,10 +805,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 45a86eb097..9e577c5d07 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index 11bc488462..33a31f4ef8 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/A10M/Configuration_adv.h b/config/examples/Geeetech/A10M/Configuration_adv.h index cf11d7dc17..7c2a964efd 100644 --- a/config/examples/Geeetech/A10M/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/A10T/Configuration_adv.h b/config/examples/Geeetech/A10T/Configuration_adv.h index cf11d7dc17..7c2a964efd 100644 --- a/config/examples/Geeetech/A10T/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 1f4273e4cc..10ce2ea1f2 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 1f4273e4cc..10ce2ea1f2 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 1f4273e4cc..10ce2ea1f2 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 579a3c06f6..89af605fea 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index 3fdc90ce69..6bf422188d 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 6d3d2b9967..b881b576c7 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 579a3c06f6..89af605fea 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index 3fdc90ce69..6bf422188d 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index ec6d3ab78e..195d7fcdf8 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 6d3d2b9967..b881b576c7 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index 03fbe3eb16..64fdf01e1b 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index f29ec0685b..da50c708a6 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 45a86eb097..9e577c5d07 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 45a86eb097..9e577c5d07 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index 87340a37e5..90c06fa2ed 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -792,10 +792,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 8ef1e28eb9..0140aaa08e 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 3e2e2aabef..98517bc3a4 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 8c94caf7ba..0350651903 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -806,10 +806,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index 618f34ea04..6e01641e57 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 8c94caf7ba..0350651903 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -806,10 +806,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 33dcd18047..c9c8830bb1 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index e4d576e773..b57b4bf83e 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index e72a626985..787ae48096 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index 764ed70d13..a3554f0bfb 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 6c6810084e..6ab45ac192 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index d5fe2c6e1d..fdfa57b4a7 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 932936775d..517267c4bc 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 55879c58ea..03befc1e78 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -803,10 +803,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 91de89b241..41b1eee329 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Mks/Robin/Configuration_adv.h b/config/examples/Mks/Robin/Configuration_adv.h index 551484bcfb..6b1febc8f5 100644 --- a/config/examples/Mks/Robin/Configuration_adv.h +++ b/config/examples/Mks/Robin/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index e23c2ab824..d747320aa1 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 461c82acc1..60a56bf1c8 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 19506756b4..f2555f4bff 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 618dd3e8a3..36087295eb 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index eb56e5a123..595eee1532 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 24d0f9e010..3b274dd999 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index b71b999f4b..cf372681fb 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 9c3bbbdd53..ed7b2e6816 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 9c3bbbdd53..ed7b2e6816 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 9c3bbbdd53..ed7b2e6816 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index 9dc06427ad..7aa48e97cd 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 827e32c03d..f927aee352 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -798,10 +798,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index 8c41a6360d..07b86a7224 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -798,10 +798,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index ab889968f1..a0215ea16e 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index d90efc55de..e581d55979 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Sovol/SV-01/Configuration_adv.h b/config/examples/Sovol/SV-01/Configuration_adv.h index e3b489b69b..24f46dffe6 100644 --- a/config/examples/Sovol/SV-01/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index a2bf8aec40..ec26975fa5 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index 8601f99696..0bf607de69 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index b5f0305a3d..0b1e812a10 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index fcffa2500b..b933093d45 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index fcffa2500b..b933093d45 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 49912f2e4a..c05fc620fc 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index 971cd68f23..1241161c93 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index ea3cce9ccc..40fd7ae15d 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index 552b599694..bb8f37efd0 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index f9ce20e298..e212bf9ce5 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 2149dca311..0a90968b79 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 2149dca311..0a90968b79 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 2149dca311..0a90968b79 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index cdfe241302..1c06c5191f 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -807,10 +807,10 @@ #endif #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. + // Define positions for probe points. #define TRAMMING_POINT_XY { { 45, 45 }, { 255, 45 }, { 255, 250 }, { 45, 250 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 9e4e8daf34..4da6a4e309 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. + // Define positions for probe points. #define TRAMMING_POINT_XY { { 20, 15 }, { 200, 15 }, { 200, 175 }, { 20, 175 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 0f717c7a4c..10991efd3f 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 0f95d32245..1964590132 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index b737eea87d..f0d2b3dac8 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index f7ef07fced..5a620c115e 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -814,10 +814,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 4f7c863733..52321713ea 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 4f7c863733..52321713ea 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 44ef478095..59975191bd 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 02ff3b7e77..8851b8aad8 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 204882f633..9f7b063e2b 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index e88a47f2c4..c4d884af10 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index e7c2cfebee..98c2078da5 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index e0450e59fa..de95114e4d 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 9eb649d01b..1109c79148 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 512fac28e5..42741d3094 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 4fc816d801..d237f1247a 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -803,10 +803,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index ba8903f4f4..ce89fcd4db 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 6e3d4b7f7c..2727e835ef 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 20fec92d04..26c71fcb53 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 1ea946543a..0c1d4bfa00 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index 4ae7448b47..485104775b 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index b5cefedfee..2eb7eb6e79 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 69c78dd484..29c6c52c93 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 69c78dd484..29c6c52c93 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index 3182f1c9a4..1caac0f2c4 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 16f297cd9d..4dfc9c747b 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index edb10ac4ca..4d5d8cc8a3 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index edb10ac4ca..4d5d8cc8a3 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index edb10ac4ca..4d5d8cc8a3 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 68a7273bb1..486c99281d 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index a2887c88bc..8be7cd9242 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index c3da89441f..c4a1fdf09c 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 95ead645c7..026d58408e 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index bb8f53db12..b0b5219603 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index 3182f1c9a4..1caac0f2c4 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index f524c735c9..0db7584f73 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index d3d8b0d7fc..22e328a25a 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -802,10 +802,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index d248777c94..0073add00f 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index 6c04f4bcef..46494ab84e 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right" diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 5f2e37f263..1327bc6cdd 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -801,10 +801,10 @@ //#define ASSISTED_TRAMMING #if ENABLED(ASSISTED_TRAMMING) - // Define positions for probing points, use the hotend as reference not the sensor. - #define TRAMMING_POINT_XY { { 20, 20 }, { 200, 20 }, { 200, 200 }, { 20, 200 } } + // Define positions for probe points. + #define TRAMMING_POINT_XY { { 20, 20 }, { 180, 20 }, { 180, 180 }, { 20, 180 } } - // Define positions names for probing points. + // Define position names for probe points. #define TRAMMING_POINT_NAME_1 "Front-Left" #define TRAMMING_POINT_NAME_2 "Front-Right" #define TRAMMING_POINT_NAME_3 "Back-Right"