diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
index a11b54c80f..1455470f35 100644
--- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
+++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h	
@@ -1802,7 +1802,7 @@
  * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
-//#define ADVANCED_PAUSE_FEATURE
+#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
   #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
   #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
diff --git a/config/examples/Cartesio/Configuration.h b/config/examples/Cartesio/Configuration.h
index 6beb232355..470fc06e67 100644
--- a/config/examples/Cartesio/Configuration.h
+++ b/config/examples/Cartesio/Configuration.h
@@ -322,7 +322,7 @@
  * Enable and connect the power supply to the PS_ON_PIN.
  * Specify whether the power supply is active HIGH or active LOW.
  */
-#define PSU_CONTROL
+//#define PSU_CONTROL
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
diff --git a/config/examples/Geeetech/A10/Configuration.h b/config/examples/Geeetech/A10/Configuration.h
index 81a7dbadb7..c0432e90b3 100644
--- a/config/examples/Geeetech/A10/Configuration.h
+++ b/config/examples/Geeetech/A10/Configuration.h
@@ -962,7 +962,7 @@
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -5
-#define Z_PROBE_OFFSET_RANGE_MAX -0.2
+#define Z_PROBE_OFFSET_RANGE_MAX 0
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
diff --git a/config/examples/Geeetech/A10M/Configuration.h b/config/examples/Geeetech/A10M/Configuration.h
index 862ce101f7..5e2ebb8dea 100644
--- a/config/examples/Geeetech/A10M/Configuration.h
+++ b/config/examples/Geeetech/A10M/Configuration.h
@@ -962,7 +962,7 @@
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -5
-#define Z_PROBE_OFFSET_RANGE_MAX -0.2
+#define Z_PROBE_OFFSET_RANGE_MAX 0
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
diff --git a/config/examples/Geeetech/A10T/Configuration.h b/config/examples/Geeetech/A10T/Configuration.h
index 6e529cca4f..0b8bef43cd 100644
--- a/config/examples/Geeetech/A10T/Configuration.h
+++ b/config/examples/Geeetech/A10T/Configuration.h
@@ -962,7 +962,7 @@
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -5
-#define Z_PROBE_OFFSET_RANGE_MAX -0.2
+#define Z_PROBE_OFFSET_RANGE_MAX 0
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
diff --git a/config/examples/Geeetech/A20/Configuration.h b/config/examples/Geeetech/A20/Configuration.h
index 985d36cf2e..f72a89f6f1 100644
--- a/config/examples/Geeetech/A20/Configuration.h
+++ b/config/examples/Geeetech/A20/Configuration.h
@@ -962,7 +962,7 @@
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -5
-#define Z_PROBE_OFFSET_RANGE_MAX -0.2
+#define Z_PROBE_OFFSET_RANGE_MAX 0
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
diff --git a/config/examples/Geeetech/A20M/Configuration.h b/config/examples/Geeetech/A20M/Configuration.h
index 59ded953a5..5a74da36e5 100644
--- a/config/examples/Geeetech/A20M/Configuration.h
+++ b/config/examples/Geeetech/A20M/Configuration.h
@@ -962,7 +962,7 @@
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -5
-#define Z_PROBE_OFFSET_RANGE_MAX -0.2
+#define Z_PROBE_OFFSET_RANGE_MAX 0
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
diff --git a/config/examples/Geeetech/A20T/Configuration.h b/config/examples/Geeetech/A20T/Configuration.h
index f728203c82..aeaa288ff2 100644
--- a/config/examples/Geeetech/A20T/Configuration.h
+++ b/config/examples/Geeetech/A20T/Configuration.h
@@ -962,7 +962,7 @@
 
 // For M851 give a range for adjusting the Z probe offset
 #define Z_PROBE_OFFSET_RANGE_MIN -5
-#define Z_PROBE_OFFSET_RANGE_MAX -0.2
+#define Z_PROBE_OFFSET_RANGE_MAX 0
 
 // Enable the M48 repeatability test to test probe accuracy
 //#define Z_MIN_PROBE_REPEATABILITY_TEST
diff --git a/config/examples/JGAurora/A1/Configuration.h b/config/examples/JGAurora/A1/Configuration.h
index 960d8920e3..cc1cc8f5a0 100644
--- a/config/examples/JGAurora/A1/Configuration.h
+++ b/config/examples/JGAurora/A1/Configuration.h
@@ -72,10 +72,6 @@
 
 // Author info of this build printed to the host during boot and M115
 
-//  ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐
-//  ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │  │ ││││
-// ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚  └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴
-
 #define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
diff --git a/config/examples/JGAurora/A5/Configuration.h b/config/examples/JGAurora/A5/Configuration.h
index fe22a03d41..57bd074070 100644
--- a/config/examples/JGAurora/A5/Configuration.h
+++ b/config/examples/JGAurora/A5/Configuration.h
@@ -1290,7 +1290,7 @@
  * Add a bed leveling sub-menu for ABL or MBL.
  * Include a guided procedure if manual probing is enabled.
  */
-#define LCD_BED_LEVELING
+//#define LCD_BED_LEVELING
 
 #if ENABLED(LCD_BED_LEVELING)
   #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.
diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h
index a3da43cf8d..f728efd522 100644
--- a/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/config/examples/JGAurora/A5/Configuration_adv.h
@@ -1702,7 +1702,7 @@
 // enter the serial receive buffer, so they cannot be blocked.
 // Currently handles M108, M112, M410
 // Does not work on boards using AT90USB (USBCON) processors!
-//#define EMERGENCY_PARSER
+#define EMERGENCY_PARSER
 
 // Bad Serial-connections can miss a received command by sending an 'ok'
 // Therefore some clients abort after 30 seconds in a timeout.
diff --git a/config/examples/JGAurora/A5S/Configuration.h b/config/examples/JGAurora/A5S/Configuration.h
index e38b2db597..80583a994e 100644
--- a/config/examples/JGAurora/A5S/Configuration.h
+++ b/config/examples/JGAurora/A5S/Configuration.h
@@ -72,10 +72,6 @@
 
 // Author info of this build printed to the host during boot and M115
 
-//  ╦╔═╗╔═╗┬ ┬┬─┐┌─┐┬─┐┌─┐╔═╗┌─┐┬─┐┬ ┬┌┬┐ ┌─┐┌─┐┌┬┐
-//  ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │  │ ││││
-// ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚  └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴
-
 #define STRING_CONFIG_H_AUTHOR "(Roberto Mariani & Samuel Pinches)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h
index 47a74ca7d9..adb1b84288 100644
--- a/config/examples/JGAurora/Magic/Configuration_adv.h
+++ b/config/examples/JGAurora/Magic/Configuration_adv.h
@@ -1802,7 +1802,7 @@
  * Requires NOZZLE_PARK_FEATURE.
  * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
  */
-//#define ADVANCED_PAUSE_FEATURE
+#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
   #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
   #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
diff --git a/config/examples/RigidBot/Configuration.h b/config/examples/RigidBot/Configuration.h
index c45e0879bc..a4785e8c76 100644
--- a/config/examples/RigidBot/Configuration.h
+++ b/config/examples/RigidBot/Configuration.h
@@ -324,7 +324,7 @@
  * Enable and connect the power supply to the PS_ON_PIN.
  * Specify whether the power supply is active HIGH or active LOW.
  */
-#define PSU_CONTROL
+//#define PSU_CONTROL
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
diff --git a/config/examples/STM32/STM32F103RE/Configuration.h b/config/examples/STM32/STM32F103RE/Configuration.h
index dd6a911c1b..bc4bdd067f 100644
--- a/config/examples/STM32/STM32F103RE/Configuration.h
+++ b/config/examples/STM32/STM32F103RE/Configuration.h
@@ -103,7 +103,7 @@
  *
  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  */
-#define SERIAL_PORT 0
+#define SERIAL_PORT -1
 
 /**
  * Select a secondary serial port on the board to use for communication with the host.
diff --git a/config/examples/STM32/stm32f103ret6/Configuration.h b/config/examples/STM32/stm32f103ret6/Configuration.h
index 0f4e6aeaab..8bc1dd180c 100644
--- a/config/examples/STM32/stm32f103ret6/Configuration.h
+++ b/config/examples/STM32/stm32f103ret6/Configuration.h
@@ -103,7 +103,7 @@
  *
  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  */
-#define SERIAL_PORT 0
+#define SERIAL_PORT -1
 
 /**
  * Select a secondary serial port on the board to use for communication with the host.
diff --git a/config/examples/Tevo/Tornado/_Bootscreen.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/_Bootscreen.h
similarity index 100%
rename from config/examples/Tevo/Tornado/_Bootscreen.h
rename to config/examples/Tevo/Tornado/V1 (MKS Base)/_Bootscreen.h
diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/_Bootscreen.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/_Bootscreen.h
new file mode 100644
index 0000000000..ebec255674
--- /dev/null
+++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/_Bootscreen.h	
@@ -0,0 +1,85 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Made with Marlin Bitmap Converter
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+#define CUSTOM_BOOTSCREEN_TIMEOUT      1500
+#define CUSTOM_BOOTSCREEN_BMPWIDTH      112
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+  B00000000,B00000000,B00011111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00011111,B11111111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000001,B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00001111,B11111110,B00000000,B00001111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00111111,B00000000,B00000000,B00000000,B00000011,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B01111000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B11100000,B01111111,B11000000,B00000000,B00000000,B00000000,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B11001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00011111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B01111100,B00000000,B00000000,B00000000,B00000000,B00011110,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00011110,B00000000,B00000000,B00000000,B00000000,B00000111,B11001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000111,B10000000,B00000000,B00000000,B00000000,B00000111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00010000,B11111100,B00000000,B00000000,B00000000,B00011111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00010000,B00011111,B11111000,B00000000,B00000011,B11111110,B00111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00011000,B00000000,B01111111,B11111111,B11111111,B11000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00011100,B00000000,B00000000,B00000000,B00000000,B00000011,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00001110,B00000000,B00000000,B00000000,B00000000,B00011111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000011,B10000000,B00000000,B00000000,B00000010,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000001,B11100000,B00000000,B00000000,B00001111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00111000,B00000000,B00000000,B11111111,B11100111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000100,B00000000,B00000011,B11100000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000000,B00011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B01100000,B00000000,B00000000,B00000000,B01111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00110000,B00000000,B00000000,B00000001,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00011100,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000111,B10000000,B00000000,B11111110,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B01000000,B00000001,B00000000,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B01111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000011,B11110110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+  B00000000,B00000000,B10000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000000,B00000000,
+  B00000000,B00000000,B01110000,B00000000,B00111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,
+  B00000000,B00000000,B00111000,B00000000,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11000000,B00000000,
+  B00000000,B00000000,B00001100,B00000111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B10000000,B00000000,
+  B00000000,B00000000,B00000000,B00001100,B00110000,B00000000,B00000000,B10000000,B00000000,B00110000,B00000000,B11111000,B00000111,B11000000,B00000000,
+  B00000000,B00000000,B00000000,B00000000,B01110000,B00011111,B11011111,B11111110,B11111110,B01111000,B00110011,B11111000,B01100111,B11000011,B11111000,
+  B00000000,B00000000,B00000000,B00000000,B11100000,B01111111,B11111111,B11111111,B01111110,B11111000,B11111111,B11110001,B11111111,B11000111,B11111100,
+  B00000000,B00000000,B00000000,B00000011,B11000001,B11111111,B11111111,B11011111,B10111111,B11111101,B11111111,B11110011,B11111111,B11001111,B11111110,
+  B00000000,B00000000,B00000000,B00000111,B01100001,B11111111,B11100111,B10111111,B10111111,B11111101,B11111111,B11110111,B11111111,B11011111,B11111110,
+  B00000000,B00000000,B00000000,B00000000,B01100001,B11100000,B01100111,B10111111,B10111111,B11111111,B11111111,B11110111,B11111111,B11111110,B00001110,
+  B00000000,B00000000,B00000000,B00000001,B11000001,B11000000,B01100111,B10111111,B00111111,B01111011,B10000001,B11100111,B00000111,B10111000,B00001110,
+  B00000000,B00000000,B00000000,B00011111,B10000001,B10000001,B11100111,B11000000,B00111110,B01111011,B11101111,B11100111,B11111111,B10111000,B00011100,
+  B00000000,B00000000,B00000000,B00001111,B00000001,B11111111,B11100111,B11100000,B00011110,B01111011,B11111111,B11111111,B11111111,B11111111,B11111100,
+  B00000000,B00000000,B00000000,B00111111,B10000000,B11111111,B11001111,B11111000,B01111110,B01111011,B11111111,B11111111,B11111111,B11111111,B11111100,
+  B00000000,B00000000,B00000000,B00111111,B00000000,B01111111,B10011111,B11111000,B01111110,B01111001,B11111111,B11111011,B11110111,B11101111,B11111000,
+  B00000000,B00000000,B00000000,B00011111,B00000000,B00111111,B00011110,B00000000,B00000010,B01111111,B11110001,B00000000,B00000100,B00000011,B11110000,
+  B00000000,B00000000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000
+};
diff --git a/config/examples/Tronxy/X5S/Configuration.h b/config/examples/Tronxy/X5S/Configuration.h
index ab134b8176..c5569a04ce 100644
--- a/config/examples/Tronxy/X5S/Configuration.h
+++ b/config/examples/Tronxy/X5S/Configuration.h
@@ -321,7 +321,7 @@
  * Enable and connect the power supply to the PS_ON_PIN.
  * Specify whether the power supply is active HIGH or active LOW.
  */
-#define PSU_CONTROL
+//#define PSU_CONTROL
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
diff --git a/config/examples/Tronxy/XY100/Configuration.h b/config/examples/Tronxy/XY100/Configuration.h
index ad3cbe73c8..88180505f8 100644
--- a/config/examples/Tronxy/XY100/Configuration.h
+++ b/config/examples/Tronxy/XY100/Configuration.h
@@ -1580,7 +1580,7 @@
  *
  * View the current statistics with M78.
  */
-#define PRINTCOUNTER
+//#define PRINTCOUNTER
 
 //=============================================================================
 //============================= LCD and SD support ============================
diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration.h b/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 6991792018..215e597a59 100644
--- a/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -321,7 +321,7 @@
  * Enable and connect the power supply to the PS_ON_PIN.
  * Specify whether the power supply is active HIGH or active LOW.
  */
-#define PSU_CONTROL
+//#define PSU_CONTROL
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
diff --git a/config/examples/Velleman/K8400/Single-head/Configuration.h b/config/examples/Velleman/K8400/Single-head/Configuration.h
index 01a041cb3e..f44cacf793 100644
--- a/config/examples/Velleman/K8400/Single-head/Configuration.h
+++ b/config/examples/Velleman/K8400/Single-head/Configuration.h
@@ -321,7 +321,7 @@
  * Enable and connect the power supply to the PS_ON_PIN.
  * Specify whether the power supply is active HIGH or active LOW.
  */
-#define PSU_CONTROL
+//#define PSU_CONTROL
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h
index c2fb828c28..a69202633d 100644
--- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h	
+++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration.h	
@@ -87,7 +87,6 @@
 
 // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
 #define SHOW_BOOTSCREEN
-#define STRING_SPLASH_LINE2 "https://botinabox.ca"
 
 // Show the bitmap in Marlin/_Bootscreen.h on startup.
 #define SHOW_CUSTOM_BOOTSCREEN
@@ -766,9 +765,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          700    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          700     // X, Y, Z and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   700    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   700     // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)
diff --git a/config/examples/delta/kossel_pro/Configuration.h b/config/examples/delta/kossel_pro/Configuration.h
index f31eb5ad96..df2d64b127 100644
--- a/config/examples/delta/kossel_pro/Configuration.h
+++ b/config/examples/delta/kossel_pro/Configuration.h
@@ -325,7 +325,7 @@
  * Enable and connect the power supply to the PS_ON_PIN.
  * Specify whether the power supply is active HIGH or active LOW.
  */
-#define PSU_CONTROL
+//#define PSU_CONTROL
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)
@@ -879,7 +879,7 @@
  *
  * Enable this option for a probe connected to the Z Min endstop pin.
  */
-#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
 
 /**
  * Z_MIN_PROBE_PIN
diff --git a/config/examples/makibox/Configuration.h b/config/examples/makibox/Configuration.h
index c64c31ea84..eb10d8d4f5 100644
--- a/config/examples/makibox/Configuration.h
+++ b/config/examples/makibox/Configuration.h
@@ -321,7 +321,7 @@
  * Enable and connect the power supply to the PS_ON_PIN.
  * Specify whether the power supply is active HIGH or active LOW.
  */
-#define PSU_CONTROL
+//#define PSU_CONTROL
 //#define PSU_NAME "Power Supply"
 
 #if ENABLED(PSU_CONTROL)